Re: [RCSE] Antenna Wire ???
The idea is to use multi strand for redundancy, other than this as long as it is as conductive as the OEM material it's performance will be similar. Marta Zavala wrote: I want to lengthen the anteena on a Rx, is there a special wire I have to use or is it just standard wire/insulation? Thanks, Walter -- Simon Van Leeuwen RADIUS SYSTEMS PnP SYSTEMS - The E-Harness of Choice Cogito Ergo Zooom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] Antenna Wire
On Sat, Nov 20, 2004 at 08:51:37PM -0600, Robert Samuels wrote: | I was told by Futaba service to use the finest (smallest diameter) | wire possible. Ultimately, it doesn't matter what you use, as long as the length is correct. Stranded wire is nice because it's less likely to break and more pliable, but beyond that, it really doesn't matter. | For several years I have successfully substituted very fine music | wire in antennas. To be fair, you could `successfully' subsititute it with pretty much anything metalic that's the right length. Antennas are funny like that :) | I purchased the wire in 36 in. lengths from my local hobby shop. I | used the finest wire that would not flop around when extended from | the rear of the plane. I'd be afraid of poking my eye out with that :) (But I don't doubt that it works just fine.) I do like the suggestion given of using PC mouse wire ... great idea! (Since I have lots of old mice floating around, and it's a lot cheaper than using servo wire like I have been.) -- Doug McLaren, [EMAIL PROTECTED] Television. Teacher, mother, secret lover. --Homer Simpson RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
>>Been told that wire guage has no impact on reception, >>curious to know if that's true or not. Yes, it is true. But for mechanical reasons multistrand is preferred. Insulated is also not required but is preferred for both mechanical and electrical reasons. Generally speaking you can use most any conductor. I've used music wire too, when the installation lended itself to do so. I know one guy who used the burglar alarm window foil. But mechanical durability is often overlooked and just taken for granted. An installation can be thought acceptable when it's really doomed to eventually fail. Bill Swingle RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
I use magnet wire from radio shack, very light and cheap. Scrape the insulation off with a knife. Been told that wire guage has no impact on reception, curious to know if that's true or not. Richard --- In [EMAIL PROTECTED], "Mark Williams" <[EMAIL PROTECTED]> wrote: > Does anybody have a good source for receiver antenna wire? I have 3 > receivers that I would like to replace the wire on. One was in my Graphite > and I extended it to 1/4 wave length outside of the fuselage using one > conductor I stripped from some Hitec servo wire. I would prefer to obtain a > reasonable quantity of single conductor wire. > > Thanks, > Mark > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
No. The futaba service rep was quite specific in specifying the finest wire possible. We discussed using a single strand of music wire which he thought would be optimum. As I mentioned I have used such antennas for several years with excellent results. (that is my planes have not fallen from the sky due to antenna problems. When they did fall it was almost inevitably from pilot error) Robert Samuels..St. Louis From: Simon Van Leeuwen <[EMAIL PROTECTED]> I think what the Futaba service rep meant was to utilize lead material that has the highest strand count you can find. This, in an effort to increase mechanical integrity. I don't think he meant to say use the finest single strand wire... Robert Samuels wrote: I was told by Futaba service to use the finest (smallest diameter) wire possible. For several years I have successfully substituted very fine music wire in antennas. I purchased the wire in 36 in. lengths from my local hobby shop. I used the finest wire that would not flop around when extended from the rear of the plane. Robert SamuelsSt. Louis _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. -- Simon Van Leeuwen RADIUS SYSTEMS PnP SYSTEMS - The E-Harness of Choice Cogito Ergo Zooom _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
I agree, but it would seem there might be a misunderstanding. If music wire were recommended that is one thing, even then not nessassarily the right ting the same reasons one should employ a stranded lead...single point failure. The way the original message reads, it is suggested very fine (thin, skinny, very small gauge) single wire was suggested as appropriate. I think it is not the right thing to be using. Tidbit: strand: single electrical wire conductor of some gauge (awg) lead: a bunch of electrical wire conductors bundled together to produce a conductor cable: 2 or more leads bundled together Charles Frey wrote: I can understand one strand of flexible wire being a problem, but piano, I don't agree with. The only way you're going to break a peice of piano wire is a sheering force that cuts right across the wire. If you've just broke your piano wire antenna, I'd bet that not your only problem. :) -Charles On Sat, 20 Nov 2004, Simon Van Leeuwen wrote: I think what the Futaba service rep meant was to utilize lead material that has the highest strand count you can find. This, in an effort to increase mechanical integrity. I don't think he meant to say use the finest single strand wire... Robert Samuels wrote: I was told by Futaba service to use the finest (smallest diameter) wire possible. For several years I have successfully substituted very fine music wire in antennas. I purchased the wire in 36 in. lengths from my local hobby shop. I used the finest wire that would not flop around when extended from the rear of the plane. Robert SamuelsSt. Louis _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. -- Simon Van Leeuwen RADIUS SYSTEMS PnP SYSTEMS - The E-Harness of Choice Cogito Ergo Zooom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. -- Simon Van Leeuwen RADIUS SYSTEMS PnP SYSTEMS - The E-Harness of Choice Cogito Ergo Zooom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
I can understand one strand of flexible wire being a problem, but piano, I don't agree with. The only way you're going to break a peice of piano wire is a sheering force that cuts right across the wire. If you've just broke your piano wire antenna, I'd bet that not your only problem. :) -Charles On Sat, 20 Nov 2004, Simon Van Leeuwen wrote: > I think what the Futaba service rep meant was to utilize lead material > that has the highest strand count you can find. This, in an effort to > increase mechanical integrity. I don't think he meant to say use the > finest single strand wire... > > Robert Samuels wrote: > > > I was told by Futaba service to use the finest (smallest diameter) wire > > possible. For several years I have successfully substituted very fine > > music wire in antennas. I purchased the wire in 36 in. lengths from my > > local hobby shop. I used the finest wire that would not flop around > > when extended from the rear of the plane. > > > > Robert SamuelsSt. Louis > > > > _ > > Express yourself instantly with MSN Messenger! Download today - it's > > FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" > > and "unsubscribe" requests to [EMAIL PROTECTED] Please note > > that subscribe and unsubscribe messages must be sent in text only format > > with MIME turned off. > > > > -- > Simon Van Leeuwen > RADIUS SYSTEMS > PnP SYSTEMS - The E-Harness of Choice > Cogito Ergo Zooom > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and > "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and > unsubscribe messages must be sent in text only format with MIME turned off. > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
I think what the Futaba service rep meant was to utilize lead material that has the highest strand count you can find. This, in an effort to increase mechanical integrity. I don't think he meant to say use the finest single strand wire... Robert Samuels wrote: I was told by Futaba service to use the finest (smallest diameter) wire possible. For several years I have successfully substituted very fine music wire in antennas. I purchased the wire in 36 in. lengths from my local hobby shop. I used the finest wire that would not flop around when extended from the rear of the plane. Robert SamuelsSt. Louis _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. -- Simon Van Leeuwen RADIUS SYSTEMS PnP SYSTEMS - The E-Harness of Choice Cogito Ergo Zooom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
RE: [RCSE] Antenna Wire
I was told by Futaba service to use the finest (smallest diameter) wire possible. For several years I have successfully substituted very fine music wire in antennas. I purchased the wire in 36 in. lengths from my local hobby shop. I used the finest wire that would not flop around when extended from the rear of the plane. Robert SamuelsSt. Louis _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
RE: [RCSE] Antenna Wire
Mark, Find a dead PC Mouse, cut the cable off, carefully strip the outer jacket off, and you'll have more antenna wire than you know what to do with! -Sheldon- YNT uDesign -Original Message- From: Mark Williams [mailto:[EMAIL PROTECTED] Sent: Friday, November 19, 2004 4:40 PM To: RCSE Subject: [RCSE] Antenna Wire Does anybody have a good source for receiver antenna wire? I have 3 receivers that I would like to replace the wire on. One was in my Graphite and I extended it to 1/4 wave length outside of the fuselage using one conductor I stripped from some Hitec servo wire. I would prefer to obtain a reasonable quantity of single conductor wire. Thanks, Mark RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
RE: [RCSE] Antenna Wire
Title: RE: [RCSE] Antenna Wire FMA has some really nice wire in a light gauge, great for antennas. It's 3 separate strands, so just use 1 per. Matt -Original Message- From: Simon Van Leeuwen [mailto:[EMAIL PROTECTED]] Sent: Friday, November 19, 2004 5:16 PM To: Mark Williams Cc: RCSE Subject: Re: [RCSE] Antenna Wire I'll assume you mean single lead, and not single conductor. Any multi stranded lead from 26 through 22awg will work fine. Unless your application is on an extremely light aircraft (like a DLG), then multistrand lead is safer, as a failure of one or more strands does not result in reduced range... Quoting Mark Williams <[EMAIL PROTECTED]>: > Does anybody have a good source for receiver antenna wire? I have 3 > receivers that I would like to replace the wire on. One was in my Graphite > and I extended it to 1/4 wave length outside of the fuselage using one > conductor I stripped from some Hitec servo wire. I would prefer to obtain a > reasonable quantity of single conductor wire. > > Thanks, > Mark > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and > "unsubscribe" requests to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in text only format with MIME > turned off. > Radius Systems Cogito Ergo Zoom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] Antenna Wire
I'll assume you mean single lead, and not single conductor. Any multi stranded lead from 26 through 22awg will work fine. Unless your application is on an extremely light aircraft (like a DLG), then multistrand lead is safer, as a failure of one or more strands does not result in reduced range... Quoting Mark Williams <[EMAIL PROTECTED]>: > Does anybody have a good source for receiver antenna wire? I have 3 > receivers that I would like to replace the wire on. One was in my Graphite > and I extended it to 1/4 wave length outside of the fuselage using one > conductor I stripped from some Hitec servo wire. I would prefer to obtain a > reasonable quantity of single conductor wire. > > Thanks, > Mark > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and > "unsubscribe" requests to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in text only format with MIME > turned off. > Radius Systems Cogito Ergo Zoom RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
Re: [RCSE] antenna wire size
Thin copper foil with adhesive is available at any good stained glass shop in widths from 1/8 inch to 3/8 inch or so. You can cut it to a narrower size on the roll with a good (Master Airscrew) balsa stripper. -- Dick Barker Seattle, WA - The Old Fart Glider Flyer - _YK replied: >Wire size is always put in relationship to its wave length 0.01:1 is a >comfortable ratio. 0.001:1 may cause a mild concern of bandwidth . Dealers and vendor, can pay attention to this potential marketing opportunity, for "thin" copper foils with adhesive. :-). RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] antenna wire size
Hi Tony, Just about any size wire will work with your hand launch glider. The length should be 39" for 72 MHz. That will get you in the ball park. Thermals, Art Antonio Martinez wrote: > I know this has been addressed in the past - but I wasn't paying attention > (sorry YK)... Does the size of antenna wire matter, or just the length. I > have been using a pushrod as the antenna in my HL, but I'd like to use CF > rods instead. This means I need a bona fide antenna. I was hoping to use > wirewrap material (very fine dia copper wire) glued onto the fuse exterior. > Any antenna engineers out there? > TIA > a > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and >"unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] antenna wire size
Wire size is always put in relationship to its wave length 0.01:1 is a comfortable ratio. 0.001:1 may cause a mild concern of bandwidth. That will generate band selectivity and can cause some channel are more effective than another across the RC band. Over all wire size variation can cause much less impact than wire length (0.25wave on groundplane, 0.5wave air borne). Once again, we are using a ground base antenna in air borne applications that is electrically incorrect. I use 0.5wave across my 2m planes, or 0.5wave in "J" tips for my HLG. If CF is inevitable, we may apply "skin effect" on antenna theory. In principle, imagine a CF boom inside an aluminum tube-antenna. Majority of RF current flow at the outside surface of metal tube, that effectively making the CF transparent. knowing that the tail boom has a high aspect ratio, a practice 2nd best to the outside tube may be considered. That is to split a single wire into two equal length and run it outside the CF in all parallel arrangement. We would expect the RF one each paralleling wire to repel one another and concentrated at the far outer portion avoiding "seeing" the CF in between them. Any metal lengths or push rod MUST carry signal current "in phase" with the antenna current. That can be met by treating them in same fashion as a member of the team of split wires, except it stay at the core. However, all lengths must be equal to comply the "in phase" requirement. Aluminum strip with adhesive is one idea that comes into my mind at this point (only if you can make reliable electrical contact at all times without soldering connection). Copper although is solderable, some may think that is too heavy. I would use copper. When ever affordable, use 4 split parallel wire can produce improved result. The split wire ending near stabilizer need not be electrically connected together, but wire tips should not flare/diverge from one another by more than 0.05 of full wire "length". Dealers and vendor, can pay attention to this potential marketing opportunity, for "thin" copper foils with adhesive. :-). Let me know if I have missed any relevant points. _YK in Seattle - Original Message - From: Antonio Martinez <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, May 27, 2000 12:41 PM Subject: [RCSE] antenna wire size > I know this has been addressed in the past - but I wasn't paying attention > (sorry YK)... Does the size of antenna wire matter, or just the length. I > have been using a pushrod as the antenna in my HL, but I'd like to use CF > rods instead. This means I need a bona fide antenna. I was hoping to use > wirewrap material (very fine dia copper wire) glued onto the fuse exterior. > Any antenna engineers out there? > TIA > a > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]