[XFree86] configuring X on nVidia Quadro4 380
I am having problems configuring XFree86 on a NetBSD/i386 system. When starting X, I get a black display and the monitor's LED blinks green (Ctrl+Alt+Backspace works to kill the X server). The system details are: NetBSD/i386 1.6.1 (GENERIC) XFree86 4.3.0 Samsung SyncMaster 172T TFT display (using DVI input) nVidia NV18GL (Quadro4 380 XGL) I ran `X -configure' which happily produced a configuration file, but when I run X to use that configuration file, I get the results I describe above. Does anyone know what I am doing wrong? I've not configured X in almost 10 years, so whatever I did know, I've forgotten! Thanks, Ben pgp0.pgp Description: PGP signature
[XFree86] radeon 7500 hardware accel. in Mandrake 9.1
Hi All It seems to appear that the Mandrake 9.1 default install uses software acceleration. Can anyone explain briefly what I need to do to get hardware acceleration running.. cheers Allan ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Out of range frequencies
Hi, I would really appreciate it if someone can help me. I'm using XFree86, version 4.3.0. My graphics card is an S3 Pro Savage DDR My monitor is a Philips 107S I could run the X server with a resolution of 640x480, with 256 colors, but anything higher than that gives me either a blank screen or a "out of range frequency" from the monitor. I read a page on the web about the S3 Savage, and I think I'm using the latest drivers. I'm appending my XF86Config file, and a log from a failed attempt. -Paulo # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** # ** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ** # Section "Module" # This loads the DBE extension module. Load"dbe"# Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" # Option"omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load"type1" Load"speedo" #Load"freetype" #Load"xtt" # This loads the GLX module #Load "glx" # This loads the DRI module #Load "dri" EndSection # ** # Files section. This allows default font and rgb paths to be set # ** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" #FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" #FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. #ModulePath "/usr/X11R6/lib/modules" EndSection # ** # Server flags section. # ** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #Option "NoTrapSignals" # Uncomment this to disable the VT switch sequence # (where n is 1 through 12). This allows cli
[XFree86] Re: Radeon 9800 AGP driver
On Thu, 12 Jun 2003, Alex Deucher wrote: >Date: Thu, 12 Jun 2003 13:49:43 -0700 (PDT) >From: Alex Deucher <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED], [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >Content-Type: text/plain; charset=us-ascii >Subject: Radeon 9800 AGP driver > >The xfree86 4.3.0 and xfree86 cvs support 2D on the 9800. open source >3D support hasn't been written yet. However, ati provides binary >drivers for xfree86 that support 2D and 3D. Radeon 9600 and 9800 aren't supported at all in XFree86 4.3.0 or CVS unless I've missed a checkin somewhere. Both may work however if you lie to X and tell it they are a Radeon 9500 or 9700. Untested. -- Mike A. Harris ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: Re: DPMS under 3.3.6
On Thu, 12 Jun 2003, Wolfgang Jeltsch wrote: >> > why isn't there any information available on the XFree86 website and in >> > the manpages about activating DPMS under XFree86 3.3.6. Option "DPMS" in >> > the Monitor section doesn't work. >> >> Whatever the reason might be, XFree86 3.3.6 is _long_ since obsolete and >> completely unmaintained. You're strongly advised to use the current >> XFree86, which is version 4.3.0. > >Hello, > >the point is that XFree86 3.3.6 is still used in at least one *current* Linux >distribution, namely the current stable release of Debian GNU/Linux. This >release provides XFree86 4.1. The problem is that 4.1 doesn't support older >video hardware. To get this older hardware working, the current stable Debian >release provides some 3.3.6 servers. And my point, is that XFree86.org doesn't support 3.3.6 anymore. Some distributions still _provide_ it, but wether or not they _support_ it, as in fixing bugs, and whatnot, depends on the particular distribution. You may wish to contact Debian directly to find out if they officially bugfix support and tech support XFree86 3.3.6. >I have a S3-based video card ("older hardware") and want to use the stable >packages of Debian wherever practical. Therefore I use XFree86 3.3.6. S3 Hardware works fine on 4.x using the "vesa" driver if the "s3" or "s3virge" drivers don't work. -- Mike A. Harris ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] autodetect dual head ?
Alex Deucher wrote: Another option that worked for a radeon user I was helping, was to set up the video chip in mergedfb mode initally with crt1 forced on or with the monitor attached. then use xrandr to resize the frame buffer on the fly. so if you have two 1024x768 heads set up the initial framebuffer as 2048x768 then use xrandr to resize to 1024x768. if you plug in the monitor rerun xrandr and change back to 2048x768. this only works in mergedfb mode and may not work on sis (I don't know that You bet it does :) any one has tried it). _I_ do actually test the code that I publish (which is something not everyone does according to my experience) :) Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Prob. with XServer
Hi !! I have a intel 845 glva motherboard running RedHat linux 8. Due to poor graphical resolution, I recently downloaded te entire 4.3 version of Xwindows (abt 70 mb) and installed it. Unfortunately, after installation (it said the installation completed successfully), when i rebooted, i did get a graphical screen with mouse, as if its just trying to bring the logon screen, but the logon screen never comes and the system remains like that. when i kill XWindows and login from console and then use 'startx', it directly goes to gui under the root's account without teh graphical logon screen. Then, when i click teh logout menu, the logout confirmatuon dialog never comes. Can anyone please tell me, whats the problem with the XWindows? Also, previously, under RedHat 7, i cld use Xconfigurator and test my settings. Under the new Xwindows system, i no longer find the "XConfigurator" command, neither it is listed in "setup". How can i get the text based graphical configuration tool? Please help me with this, since i am really stuck ... Anirban. has notified the sender that this message has been received.
Re: [XFree86] XFree86 4.3 server crashes on Linux 2.4.20/21
On Fri, 13 Jun 2003, Chris Rankin wrote: > Hi, > > I'm experiencing occasional X-server crashes with 4.3, running on my > Linux 2.4.20-SMP machine. (The crashes also happen with 2.4.21, BTW.) > This machine has 1 GB RAM, dual 933 PIII-Coppermine and a Matrox G400 > card. I am also using the current DRI from CVS, except that these > crashes don't require me to be running OpenGL applications to > happen. For example, I've just had a repeated crash trying to follow a > hyperlink on the linux-kernel mailing list website using Mozilla 1.3.1! Try not loading the "freetype" module. Maybe try "xtt" instead. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] pci info
some pci info for the support team! im using a ati 9700 (a little modified) in my dell dimension 4500 system pci bus 0x cardnum 0x00 function 0x00: vendor 0x8086 device 0x2560 Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x2090 COMMAND 0x0106 CLASS 0x06 0x00 0x00 REVISION 0x01 BASE0 0xe008 addr 0xe000 MEM PREFETCHABLE BYTE_00x3bc BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x cardnum 0x01 function 0x00: vendor 0x8086 device 0x2561 Intel Device unknown STATUS0x00a0 COMMAND 0x0107 CLASS 0x06 0x04 0x00 REVISION 0x01 HEADER0x01 LATENCY 0x40 PRIBUS0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x40 IOBASE0xe000 IOLIM 0xefff SECSTATUS 0x22a0 NOPREFETCH_MEMBASE 0xff80 MEMLIM 0xff9f PREFETCH_MEMBASE 0xe800 MEMLIM 0xf7ff NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_SERR_EN NO_PERR_EN pci bus 0x cardnum 0x1d function 0x00: vendor 0x8086 device 0x24c2 Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x0280 COMMAND 0x0005 CLASS 0x0c 0x03 0x00 REVISION 0x01 BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00 BASE4 0xff81 addr 0xff80 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b pci bus 0x cardnum 0x1d function 0x01: vendor 0x8086 device 0x24c4 Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x0280 COMMAND 0x0005 CLASS 0x0c 0x03 0x00 REVISION 0x01 BASE4 0xff61 addr 0xff60 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0a pci bus 0x cardnum 0x1d function 0x02: vendor 0x8086 device 0x24c7 Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x0280 COMMAND 0x0005 CLASS 0x0c 0x03 0x00 REVISION 0x01 BASE4 0xff41 addr 0xff40 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x09 pci bus 0x cardnum 0x1d function 0x07: vendor 0x8086 device 0x24cd Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x0290 COMMAND 0x0106 CLASS 0x0c 0x03 0x20 REVISION 0x01 BASE0 0xffa1 addr 0xffa1 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x03 pci bus 0x cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Device unknown STATUS0x8080 COMMAND 0x0107 CLASS 0x06 0x04 0x00 REVISION 0x81 HEADER0x01 LATENCY 0x00 PRIBUS0x00 SECBUS 0x02 SUBBUS 0x02 SECLT 0x20 IOBASE0xd000 IOLIM 0xdfff SECSTATUS 0x2280 NOPREFETCH_MEMBASE 0xff60 MEMLIM 0xff7f PREFETCH_MEMBASE 0xfff0 MEMLIM 0x000f NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN ISA_EN SERR_EN NO_PERR_EN pci bus 0x cardnum 0x1f function 0x00: vendor 0x8086 device 0x24c0 Intel Device unknown STATUS0x0280 COMMAND 0x000f CLASS 0x06 0x01 0x00 REVISION 0x01 BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00 BYTE_00x801 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x cardnum 0x1f function 0x01: vendor 0x8086 device 0x24cb Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x0280 COMMAND 0x0007 CLASS 0x01 0x01 0x8a REVISION 0x01 BASE0 0x5801 addr 0x5800 I/O BASE1 0x5809 addr 0x5808 I/O BASE2 0x5811 addr 0x5810 I/O BASE3 0x580d addr 0x580c I/O BASE4 0xffa1 addr 0xffa0 I/O BASE5 0x2000 addr 0x2000 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x00 BYTE_00xa307a307 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x cardnum 0x1f function 0x03: vendor 0x8086 device 0x24c3 Intel Device unknown CardVendor 0x1028 card 0x0142 (Card unknown) STATUS0x0280 COMMAND 0x0001 CLASS 0x0c 0x05 0x00 REVISION 0x01 BASE4 0xcc81 addr 0xcc80 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0b BYTE_00x01 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x4e45 ATI Device unknown CardVendor 0x1002 card 0x3002 (ATI, Card unknown) STATUS0x02b0 COMMAND 0x0187 CLASS 0x03 0x00 0x00 REVISION 0x00 BIST 0x00 HEADER 0x80 LATENCY 0x40 CACHE 0x10 BASE0 0xf008 addr 0xf000 MEM PREFETCHABLE BASE1 0xec01 addr 0xec00 I/O BASE2 0xff8f addr 0xff8f MEM BASEROM 0x8000 addr 0x8000 not-decode-enabled MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b pci bus 0x0001 cardnum 0x00 function 0x01: vendor 0x1002 device 0x4e65 ATI Device unknown CardVendor 0x1002 card 0x3003 (ATI, Card unknown) STATUS0x02b0 COMMAND 0x0084 CLASS 0x03 0x80 0x00 REVISION 0x00 BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x10 BASE0 0xe808 addr 0xe800 MEM PREFETCHABLE BASE1 0xff8e addr 0xff8e MEM MAX_LAT 0x00 MIN
[XFree86] internal error
I am running redhat 8.0 on a Pentium 4 (533) as a file server to a network of primarily MacIntosh computers. This morning we lost access to the server. I rebooted it at which point I received the following message: "I coud not start the X server (your graphical environment) due to some internal error. Please contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart gdm when" followed by: "RGGzuGGS" I am able to log in locally as a client and as the superuser with only a text interface. When I attempt to start the GUI (startx) I get the following message: "PAM authentication failed, cannot start x server. Perhaps you do not have console ownership? giving up. xinit: Nosuch file or directory (errnno 2): unagel to connect to x server xinit: No such process (errno 3): Server error" I am afraid I have no other details to offer as I am new to the world of Linux and to Unix, in general. I am trying to find the command in order to display my syslog information.
Re: [XFree86] processor does not suppport write-combining
Hey there You first need to install the VMWare Tools. Here's what you do Logon as root and select Install VMWare Tools from the VMWare File. Then mount the cdrom (mount -t iso9660 /dev/cdrom /mnt/cdrom) and in it there is a .tar.gz package. Copy it to the hard drive, extract it and follow the instructions.. then don't forget to edit the XF86Config-4 file if there is any configuration layout you need to add. Em Sex, 2003-06-13 às 15:38, Raj Reddy escreveu: > Hi , > I got a brand new lap top and trying to use the XFree86 under Windows VMWare > environment. > The message is attached below for more details. > Hope to find a solution soon. cheers. Gaja. > > _ > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > Esta mensagem foi verificada pelo E-mail Protegido Terra. > Scan engine: VirusScan / Atualizado em 11/06/2003 / Versão: 1.3.13 > Proteja o seu e-mail Terra: http://www.emailprotegido.terra.com.br/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] i845GE TV Out not using Full Screen
On Fri, 13 Jun 2003, Gavin McCullagh wrote: > I've got a Shuttle SB51G with the optional CV21 TV Out module. > > Generally a linux user, normally a Debian user, I'm using Knoppix > temporarily as it comes with XFree86 4.3 and I've not had the chance (or > rather the bandwidth) to get organized with Branden's unofficial 4.3 for > Debian. My X config is a simple one generated by knoppix which I'll post > if need be along with the X log file. They're attached here in case it helps. Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice"Keyboard0" "CoreKeyboard" InputDevice"PS/2 Mouse" "CorePointer" # Serial Mouse not detected # USB Mouse not detected EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc104" Option "XkbLayout" "gb" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device""/dev/input/mice" Option "SendCoreEvents""true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" Option "Overscan" "true" VendorName "@@@" ModelName "@@@1742" HorizSync 31 - 80 # DDC-probed VertRefresh 50 - 75 # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03 ModeLine "1280x1024"135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03 ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00 ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19 ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32 ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00 ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94 ModeLine "6
Re: [XFree86] autodetect dual head ?
Another option that worked for a radeon user I was helping, was to set up the video chip in mergedfb mode initally with crt1 forced on or with the monitor attached. then use xrandr to resize the frame buffer on the fly. so if you have two 1024x768 heads set up the initial framebuffer as 2048x768 then use xrandr to resize to 1024x768. if you plug in the monitor rerun xrandr and change back to 2048x768. this only works in mergedfb mode and may not work on sis (I don't know that any one has tried it). Also you must start with a 2048x768 frambuffer. xrandr cannot resize up if you start out with a 1024x768 framebuffer. while this may work, this case was not taken into account when xrandr or mergedfb were written so YMMV. Alex -- Philippe Moutarlier wrote: > I configured my dual head setup on my laptop using an SiS 650 chipset. > However, since the VGA is the primary, it seems that I either have to : > > - have the VGA monitor on at boot time > - set ForceCRT1 > > The first case is obviously not very practical for a laptop since the > only monitor I am sure to have on is the LCD. > > The second case is not very good either : it actually starts the second > screen in any case and seem to use a wealth of computer resources even > the monitor is not present. Furthermore, running Gnome on both screen > in that configuration brings the panel of the VGA screen on top of the > LCD one (I don't know why, though !!???). > > Would there be a way to autodetect if CRT1 is present, and THEN, turn on > dual head ? Or make Xfree not scream if CRT1 is not present and just > disable its screen instead of exiting with an error ? No. But you could make more than one ServerLayout sections and choose among them. Thomas __ Do you Yahoo!? Yahoo! Calendar - Free online calendar with sync to Outlook(TM). http://calendar.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] processor does not suppport write-combining
Hi , I got a brand new lap top and trying to use the XFree86 under Windows VMWare environment. The message is attached below for more details. Hope to find a solution soon. cheers. Gaja. _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail XFree86.0.log Description: Binary data
Re: [XFree86] autodetect dual head ?
Philippe Moutarlier wrote: How do tell Xfree which to use when using startx, for example (sorry if this is obvious :-) man startx Thomas Thanks On Fri, 2003-06-13 at 11:58, Thomas Winischhofer wrote: Philippe Moutarlier wrote: I configured my dual head setup on my laptop using an SiS 650 chipset. However, since the VGA is the primary, it seems that I either have to : - have the VGA monitor on at boot time - set ForceCRT1 The first case is obviously not very practical for a laptop since the only monitor I am sure to have on is the LCD. The second case is not very good either : it actually starts the second screen in any case and seem to use a wealth of computer resources even the monitor is not present. Furthermore, running Gnome on both screen in that configuration brings the panel of the VGA screen on top of the LCD one (I don't know why, though !!???). Would there be a way to autodetect if CRT1 is present, and THEN, turn on dual head ? Or make Xfree not scream if CRT1 is not present and just disable its screen instead of exiting with an error ? No. But you could make more than one ServerLayout sections and choose among them. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] DPMS suspend not working with tdfx Voodoo3-2000
I recently upgraded my computer (from FreeBSD 3.1 to 5.1), and now my monitor will not go into "suspend" mode; it stays in "standby". I have this in my .xsession: xset s 300 s blank dpms 1200 3600 So after 20 minutes, the monitor should go into "standby" mode, then after an hour into "suspend" mode; this was working previously. Now however, after my upgrade, it will go standby but never suspend. Even when I do "xset dpms force suspend", it goes into standby and stays there. An "xset q" in this state says the monitor is in "Suspend" state, even though it isn't. Video board is a tdfx voodoo3-2000, monitor is a NEC Multisync E950. Has anybody seen this before? Is there a fix? The OS is FreeBSD 5.1-RELEASE, here is the XF86 info: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.1 i386 [ELF] Build Date: 24 May 2003 I'm including my log and config files as mime-attachments. Help! :-) -Guy XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.1 i386 [ELF] Build Date: 24 May 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 13 00:44:40 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "MultiSync E950" (**) | |-->Device "Voodoo3 (generic)" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "omnikey101" (**) XKB: model: "omnikey101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) Option "XkbOptions" "ctrl:swapcaps" (**) XKB: options: "ctrl:swapcaps" (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:04:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:06:0: chip 9005,001f card 9005,000f rev 00 class 01,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,1229 card 8086,0008 rev 05 class 02,00,00 hdr 00 (II) PCI: 00:0a:0: chip 1274,5000 card 4942,4c4c rev 01 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 11ad,0002 card 1385,f004 rev 21 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 121a,0005 card 121a,0030 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable m
Re: [XFree86] autodetect dual head ?
How do tell Xfree which to use when using startx, for example (sorry if this is obvious :-) Thanks On Fri, 2003-06-13 at 11:58, Thomas Winischhofer wrote: > Philippe Moutarlier wrote: > > I configured my dual head setup on my laptop using an SiS 650 chipset. > > However, since the VGA is the primary, it seems that I either have to : > > > > - have the VGA monitor on at boot time > > - set ForceCRT1 > > > > The first case is obviously not very practical for a laptop since the > > only monitor I am sure to have on is the LCD. > > > > The second case is not very good either : it actually starts the second > > screen in any case and seem to use a wealth of computer resources even > > the monitor is not present. Furthermore, running Gnome on both screen > > in that configuration brings the panel of the VGA screen on top of the > > LCD one (I don't know why, though !!???). > > > > Would there be a way to autodetect if CRT1 is present, and THEN, turn on > > dual head ? Or make Xfree not scream if CRT1 is not present and just > > disable its screen instead of exiting with an error ? > > No. But you could make more than one ServerLayout sections and choose > among them. > > Thomas -- Philippe Moutarlier <[EMAIL PROTECTED]> ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] autodetect dual head ?
Philippe Moutarlier wrote: I configured my dual head setup on my laptop using an SiS 650 chipset. However, since the VGA is the primary, it seems that I either have to : - have the VGA monitor on at boot time - set ForceCRT1 The first case is obviously not very practical for a laptop since the only monitor I am sure to have on is the LCD. The second case is not very good either : it actually starts the second screen in any case and seem to use a wealth of computer resources even the monitor is not present. Furthermore, running Gnome on both screen in that configuration brings the panel of the VGA screen on top of the LCD one (I don't know why, though !!???). Would there be a way to autodetect if CRT1 is present, and THEN, turn on dual head ? Or make Xfree not scream if CRT1 is not present and just disable its screen instead of exiting with an error ? No. But you could make more than one ServerLayout sections and choose among them. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net *** http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Sorry forgot to attach the error report
Hi, My name is Paul Richard. I have installed RedHat Linux 7.3 on a HP NetServer Plus. It has a Trident TVGA 9000 chipset which is found in the drivers list, but when I try to start X it says "no screens found". Any advice would be greatly appreciated. Sincerely, Paul V. Richard TWNEOR Region Intern Boise Building Solutions Phone : (541) 519-5651 <> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 13 07:47:19 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "VESA driver (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1250 card , rev 02 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 101e,9010 card , rev 03 class 01,80,00 hdr 00 (II) PCI: 00:08:0: chip 1011,0021 card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 8086,0482 card , rev 15 class 00,00,00 hdr 00 (II) PCI: 00:0a:0: chip 9004,8078 card , rev 00 class 01,00,00 hdr 00 (II) PCI: 00:0b:0: chip 9004,8078 card , rev 00 class 01,00,00 hdr 00 (II) PCI: 01:03:0: chip 10b7,9200 card 10b7,1000 rev 74 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x07 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0xe000 - 0xe0ff (0x100) IX[B] [1] -1 0xe400 - 0xe4ff (0x100) IX[B] [2] -1 0xe800 - 0xe8ff (0x100) IX[B] [3] -1 0xec00 - 0xecff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xfeb0 - 0xfebf (0x10) MX[B] (II) Bus 1 prefetchable memory range: (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x (0x1) IX[B] [6] -1 0x
[XFree86] autodetect dual head ?
I configured my dual head setup on my laptop using an SiS 650 chipset. However, since the VGA is the primary, it seems that I either have to : - have the VGA monitor on at boot time - set ForceCRT1 The first case is obviously not very practical for a laptop since the only monitor I am sure to have on is the LCD. The second case is not very good either : it actually starts the second screen in any case and seem to use a wealth of computer resources even the monitor is not present. Furthermore, running Gnome on both screen in that configuration brings the panel of the VGA screen on top of the LCD one (I don't know why, though !!???). Would there be a way to autodetect if CRT1 is present, and THEN, turn on dual head ? Or make Xfree not scream if CRT1 is not present and just disable its screen instead of exiting with an error ? Thanks ! -- Philippe Moutarlier <[EMAIL PROTECTED]> ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XF86cfg
On Thursday, June 12, 2003, at 09:58 PM, Kelley Hilborn wrote: When trying to configure X with xf86cfg, the screen flickers, looks like it's about to go to a GUI, and then just shuts down. Logs me out of my session. From your XFree86.0.log: (EE) I810(0): AGP GART support is not available. Make sure your kernel has agpgart support or that the agpgart kernel module is loaded. looks like your kernel doesn't have AGP_GART compiled in as an option, or that your kldload isn't loading it, depending on your system. Can you send a copy of your kernel config file? Harry Frankenfeld On Thursday, June 12, 2003, at 10:45 PM, Kelley Hilborn wrote: If I knew what/where my kernel config file was, I'd gladly attach it. I'm still fairly new to BSD I'm not very familiar with the file structure of OpenBSD, but in FreeBSD, you typically put your kernel config in (for i386 platforms) /usr/src/sys/i386/conf/ . If you haven't tweaked your kernel yet, it'll probably be the GENERIC kernel (you can see it in the initial boot messages, or in dmesg). Again, in FreeBSD (-STABLE, not so in -CURRENT), there is another file called LINT that lists all of the options and flags for kernel configuration. However, I just looked at the openbsd site, and it looks like openbsd is structured a bit differently. Here's the kernel config info: http://openbsd.org/faq/faq5.html#Why It may be that OpenBSD doesn't enable AGP support by default -- FreeBSD doesn't, but doesn't choke like you're describing either. Also, I know there are a few tricks to getting the i810 working in XFree86 -- a chunk of the X Windows chapter in the FreeBSD handbook deals with getting that card going. HTH Harry Frankenfeld ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Re: DPMS under 3.3.6
On Thu, Jun 12, 2003 at 09:10:51PM +0200, Wolfgang Jeltsch wrote: >On Thursday, 2003-06-12, 20:27, Mike A. Harris wrote: >> On Thu, 12 Jun 2003, Wolfgang Jeltsch wrote: >> > why isn't there any information available on the XFree86 website and in >> > the manpages about activating DPMS under XFree86 3.3.6. Option "DPMS" in >> > the Monitor section doesn't work. >> >> Whatever the reason might be, XFree86 3.3.6 is _long_ since obsolete and >> completely unmaintained. You're strongly advised to use the current >> XFree86, which is version 4.3.0. > >Hello, > >the point is that XFree86 3.3.6 is still used in at least one *current* Linux >distribution, namely the current stable release of Debian GNU/Linux. This >release provides XFree86 4.1. The problem is that 4.1 doesn't support older >video hardware. To get this older hardware working, the current stable Debian >release provides some 3.3.6 servers. Well, it's up to Debian what they distribute (and maintain). For its part, the XFree86 Project no longer maintains, supports or advocates using 3.3.x. David -- David Dawes Founder/committer/developer The XFree86 Project www.XFree86.org/~dawes ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Compiling XFree with BuildLowMem
On Thu, Jun 12, 2003 at 09:55:51AM +1200, Miles Roper wrote: >Hi David, > >Thanks for your response, been looking at the wrong mailing list, the one at >mail-archive.com doesn't seem to be updated regularly. > >Do you have an idea to get me started at how to look at what modules use the >most memory? Commands, docs etc... My knowledge consists of top and mem. >Doesn't really give a good break down :o) That's something you'll have to do some research on (as I would to give a more detailed answer). You need to start by making sure that what you think is the X server's memory usage is actually correct (and 'top' may not be giving you the most useful information about that). David -- David Dawes Founder/committer/developer The XFree86 Project www.XFree86.org/~dawes ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Installing sis driver on MSI Hermes 650
God, what I am tired of saying this: I need to see your log. Furthermore, try the latest driver from - as the log mentiones clearly - www.winischhofer.net/ Thomas Ralf Haller wrote: Hi, I want to install the sis video driver on my MSI Hermes 650 barebone, in order to have Xvideo support. The computer is connected to my TV and is used as frontend to mythTV. The RedHat installer set the vesa driver in the XFree86 configuration file. As far as I can see, the sis driver does support my SiS 650 chipset. However when changing the driver type in the XFree86 configuration and starting X the screen remains solid black. I am using XFree86 4.3.0. I added some information from the Hermes 650 manual to this mail. What am I doing wrong? Maybe it's because I use the TV out? TV out works with vesa, however. Thanks for any help. Ralf -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net *** http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XListInputDevices
http://www.xfree86.org/current/XListInputDevices.3.html specifies that the name field of the XDedeviceInfo data structure is a value in XI.h. In practice, this is not the case. Is there an updated specification of what the field value is? Padraig ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: Re : [XFree86] i845GE TV Out not using Full Screen
On Fri, 13 Jun 2003, Emmanuel wrote: > On 2003.06.13 06:50, Gavin McCullagh wrote: > > > >I've got a Shuttle SB51G with the optional CV21 TV Out module. > > > >With TV, the initial boot sequence gives a bunch of resolution options > >or "scan" to probe. Several options work but they all amount to it > >using 640x480 or 800x600 neither of which fills the TV screen (the > >latter naturally comes a little closer). X just uses the same area > >which was used by the boot sequence. > > For the savage driver there is a "TV" option (or something approaching) > and you can use it to specify NTSC or PAL output (to see if your driver > has this option have a look at its man page). Moreover you can also > change the modelines to have better matching display. The driver I'm using is i810. As far as I understand this is the one correct one. http://www.xfree.org/4.3.0/i810.4.html Neither of those options seem to be there. All supported options would be listed there right? Gavin ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re : [XFree86] i845GE TV Out not using Full Screen
On 2003.06.13 06:50, Gavin McCullagh wrote: Hi, I've got a Shuttle SB51G with the optional CV21 TV Out module. http://www.shuttle.com/new/product/barebone/specs_b.asp?B_id=8 http://www.shuttle.com/new/product/barebone/specs_a.asp?A_id=14 Generally a linux user, normally a Debian user, I'm using Knoppix temporarily as it comes with XFree86 4.3 and I've not had the chance (or rather the bandwidth) to get organized with Branden's unofficial 4.3 for Debian. My X config is a simple one generated by knoppix which I'll post if need be along with the X log file. Anyway, all works fine (X crashes the odd time switching to text terminals, but that's a topic for another post) and to my great joy TV Out works right out of the box. Just hook it up, remove the Monitor and reboot. With TV, the initial boot sequence gives a bunch of resolution options or "scan" to probe. Several options work but they all amount to it using 640x480 or 800x600 neither of which fills the TV screen (the latter naturally comes a little closer). X just uses the same area which was used by the boot sequence. I've asked around and got ideas like "check the BIOS for an overscan option" and "try changing PAL/NTSC". There is no such option in the BIOS and I've changed the PAL/NTSC jumper and it seems to make no difference whatsoever. So, does anyone here have any suggestions for how to proceed to get full screen TV Output? For the savage driver there is a "TV" option (or something approaching) and you can use it to specify NTSC or PAL output (to see if your driver has this option have a look at its man page). Moreover you can also change the modelines to have better matching display. Bye Manu ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] External Monitor problem with radeon driver
Hi All, I've just installed Redhat 9.0 on my Compaq Evo 610c laptop. The Xserver wotk fine with the laptop panel and gives me a nice 1400x1050 resolution. However when I dock the laptop and try to drive an external CRT monitor I get problems. The attached XF86Config file will give me 1400x1050 resolution on my CRT but I get very low refresh rates i.e. 60 Hz. Secondly the very top of the screen has annoying flickering where its not redrawing the screen properly. Lastly when driving the CRT the LCD panel is still on. The PanelOff option is turned on but doesn't do anything. If I turn the option CloneMode to anything except "1" the LCD turns off but the CRT gets a virtual desktop. I have to scroll around a 640x480 desktop. Any help would be appreciated. Regards Daryl -- _ Daryl Parker Researcher, Applied Research Labs. Phone : +353 902 31571 Network Operators Solution Center Fax : +353 902 31304 Athlone, Co Westmeath,Ireland. Email : [EMAIL PROTECTED] __ XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-18.9 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu May 29 07:08:16 EDT 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 13 11:46:56 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "gb" (**) XKB: layout: "gb" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 0e11,00b7 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1e:0: chip 8086,2448 card , rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 0e11,00b7 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 0e11,00b7 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c57 card 0e11,00b7 rev 00 class 03,00,00 hdr 00 (II) PCI: 02:04:0: chip 11c1,0450 card 1468,0450 rev 02 class 07,80,00 hdr 00 (II) PCI: 02:06:0: chip 104c,ac51 card 4800, rev 00 class 06,07,00 hdr 82 (II) PCI: 02:06:1: chip 104c,ac51 card 5000, rev 00 class 06,07,00 hdr 82 (II) PCI: 02:08:0: chip 8086,1038 card 0e11,0098 rev 42 class 02,00,00 hdr 00 (II) PCI: 02:0e:0: chip 1033,0035 card 0e11,00b7 rev 41 class 0c,03,10 hdr 80 (II) PCI: 02:0e:1: chip 1033,0035 card 0e11,00b7 rev 41 class 0c,03,10 hdr 00 (II) PCI: 02:0e:2: chip 1033,00e0 card 0e11,00b7 rev 02 class 0c,03,20 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0
[XFree86] Help on configuring mouse
Hello, I have a logitech marble mouse, this is a strange trackball that has the ball at center and four buttons, two "classic standard buttons" and the other two are to simulate the wheel and go up and down on mozilla. The mouse works very well but the third and four buttons won't work they are recognized has the third button but I'm not able the configure them to work has a wheel. There are any ideas? this is my "mouse": http://www.logitech.com/index.cfm?page=products/details&CRID=6&CONTENTID=5145&countryid=10&languageid=5 thx ale ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] i845GE TV Out not using Full Screen
Hi, I've got a Shuttle SB51G with the optional CV21 TV Out module. http://www.shuttle.com/new/product/barebone/specs_b.asp?B_id=8 http://www.shuttle.com/new/product/barebone/specs_a.asp?A_id=14 Generally a linux user, normally a Debian user, I'm using Knoppix temporarily as it comes with XFree86 4.3 and I've not had the chance (or rather the bandwidth) to get organized with Branden's unofficial 4.3 for Debian. My X config is a simple one generated by knoppix which I'll post if need be along with the X log file. Anyway, all works fine (X crashes the odd time switching to text terminals, but that's a topic for another post) and to my great joy TV Out works right out of the box. Just hook it up, remove the Monitor and reboot. With TV, the initial boot sequence gives a bunch of resolution options or "scan" to probe. Several options work but they all amount to it using 640x480 or 800x600 neither of which fills the TV screen (the latter naturally comes a little closer). X just uses the same area which was used by the boot sequence. I've asked around and got ideas like "check the BIOS for an overscan option" and "try changing PAL/NTSC". There is no such option in the BIOS and I've changed the PAL/NTSC jumper and it seems to make no difference whatsoever. So, does anyone here have any suggestions for how to proceed to get full screen TV Output? Gavin ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] s3virge under 4.1.0 burns my monitor
Cristian Campeanu writes: > Hi there, > > My name is Cristian Campeanu and I'm from Romania. > I own a Likom L - 403 monitor which a broke 3 times already by changing > resolution (the usual Ctrl+Alt+-) and a S3 Trio3D. I'm running RedHat Linux > 7.2 with the 2.4.7-10 kernel and XFree 4.1.0 with the compatibility modules > for 3.3.6. > Under XF86_SVGA I had no problems but trying XFree86 to get (some) > acceleration it all works fine until I try to change resolution. Then 3 > transistors die: the final transistor, the line driver and one FET in the > source (I hope I translated this well enough for an electronics specialist to > understand). I'm guessing it's something about timings. Probably the svga > driver waits a while before applying the new settings and the s3virge driver > doesn't. > I only have one question: is it my monitor or is it software? > I'm attatching my config files and the logfile (I use a script to get messages > from 3.3.6). The problem you are seeing is quite rare and I don't recall when somebody reported here that a monitor died when switching modes. What surprises me most however that this happens although your monitor is rather new: it even has DDC support. Usually these monitors support multi sync and are capable of detecting if the sync frequencies are out of range. All modes listed in the log which are available thru mode switching are around 60Hz and should not cause problems on almost any monitor. I suppose if you set any of these modes as the startup mode you don't see any problems. So the problem is most likely the mode change itself. It is theoretically possible that during mode transition the sync frequencies are out of range for a short while. Unfortunately I have no idea how to debug this. You could try a newer version of the XFree86 as 4.1 is rather old however I don't think that the mode setting part of the code has changed since then. Do you remember if it happened during any mode transition or only during a switch between two specific modes (ie. when you switch from 1024x768 to 640x480)? Egbert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] s3virge under 4.1.0 burns my monitor
Hi, HorizSync 30-50 VertRefresh 47-110 The VertRefresh is not really realistic. Your DDC info shows you can do about 75 Hz (II) S3VIRGE(0): Supported VESA Video Modes: (II) S3VIRGE(0): [EMAIL PROTECTED] <--- (II) S3VIRGE(0): [EMAIL PROTECTED] <--- (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (interlaced) (II) S3VIRGE(0): [EMAIL PROTECTED] So set your monitor to this: HorizSync 30-50 VertRefresh 47-75 That should keep you on the save side. Wilco Holdorp -Original Message- From: Cristian Campeanu [mailto:[EMAIL PROTECTED] Sent: donderdag 12 juni 2003 6:13 To: [EMAIL PROTECTED] Subject: [XFree86] s3virge under 4.1.0 burns my monitor Hi there, My name is Cristian Campeanu and I'm from Romania. I own a Likom L - 403 monitor which a broke 3 times already by changing resolution (the usual Ctrl+Alt+-) and a S3 Trio3D. I'm running RedHat Linux 7.2 with the 2.4.7-10 kernel and XFree 4.1.0 with the compatibility modules for 3.3.6. Under XF86_SVGA I had no problems but trying XFree86 to get (some) acceleration it all works fine until I try to change resolution. Then 3 transistors die: the final transistor, the line driver and one FET in the source (I hope I translated this well enough for an electronics specialist to understand). I'm guessing it's something about timings. Probably the svga driver waits a while before applying the new settings and the s3virge driver doesn't. I only have one question: is it my monitor or is it software? I'm attatching my config files and the logfile (I use a script to get messages from 3.3.6). Thank you for existing. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Installing sis driver on MSI Hermes 650
Hi, I want to install the sis video driver on my MSI Hermes 650 barebone, in order to have Xvideo support. The computer is connected to my TV and is used as frontend to mythTV. The RedHat installer set the vesa driver in the XFree86 configuration file. As far as I can see, the sis driver does support my SiS 650 chipset. However when changing the driver type in the XFree86 configuration and starting X the screen remains solid black. I am using XFree86 4.3.0. I added some information from the Hermes 650 manual to this mail. What am I doing wrong? Maybe it's because I use the TV out? TV out works with vesa, however. Thanks for any help. Ralf MSI Hermes 650.pdf Description: Adobe PDF document
[XFree86] XFree86 size and TinyX
Hello I am trying to create the amallest possible X for my X86 linuxbox. Building X as is I get about 100MB in X11R6 directory Building X as TinyX I get about 65MB in X11R6 directory I wonder if is possible to get a minimal X in about 1-2 MB ? TIA ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86