[OPSEC] Presenters Slides Requested

To folks on the agenda<http://www.ietf.org/proceedings/85/agenda/agenda-85-opsec>- It would be greatly appreciated if you could provide the chairs with your slides no later than Wednesday night. Thanks, KK, Gunter, Warren ___ OPSEC mailing list

Re: [openflow-discuss] OpenFlow Wireless Platform

Hi Michelle, No. You can use any OpenFlow enabled equipment you like. If you are sending n-casting traffic, you might want to check that the equipment supports that (preferably in hardware). Regards KK PS>> It would help to send such email to the mailing list, in case someone have more

Re: [OPSEC] New IETF I-D about VPN traffic leakages (Fwd: New Version Notification for draft-gont-opsec-vpn-leakages-00.txt)

rotocol (e.g., that sends user and password in the clear), he may think it's okay to use it over a VPN. But with this attack, that user/pass could end up appearing in the clear on the local network.""" Something as simple as the above text in either Section 1. or Section 4. migh

[hexayurt] Re: Basic Sketchup

More resources here. Updated by Trimble for latest Sketchup versions: Quick reference card - SketchUp Help - http://bit.ly/RYlcjN Learning SketchUp (a Trimble product) - SketchUp Help - http://bit.ly/RYlt6c >From that page: Getting Started PDF: http://commondatastorage.googleapis.com/support-k

[OPSEC] Draft Agenda for OPSEC @IETF85

e-ip-address<https://datatracker.ietf.org/doc/draft-baker-opsec-passive-ip-address/>, 15 minutes """* * Regards,* *KK, Gunter, Warren * ___ OPSEC mailing list OPSEC@ietf.org https://www.ietf.org/mailman/listinfo/opsec

Re: [openflow-discuss] Problem building Pylibopenflow

. Regards KK On 22 October 2012 16:38, Abhishek Chanda wrote: > Hi all, > > I am trying to build Pylibopenflow. I followed all instructions in > http://www.openflow.org/wk/index.php/Pylibopenflow and got this error: > > achanda@achanda-OptiPlex-780:~/pylibopenflow$ sudo python setup.py

Re: [OPSEC] I-D Action: draft-ietf-opsec-lla-only-02.txt

Hi Michael, How much time do you think you would need? Thanks, KK On Mon, Oct 22, 2012 at 12:07 PM, Michael Behringer (mbehring) < mbehr...@cisco.com> wrote: > WG chairs, > > We just submitted a new version of the link-local draft, with a number of > small edits, and now

Re: Unable to include files in kickstart

Hi, I am trying to do this on centos 5 and centos 6 not yet tried this with Fedora. > > I want to include a file in kickstart that file contains all the partition > informations. But when I try to include getting the below error, > > unable to open input kickstart file : could not open/read >

Netinstall issue

Hi, I am trying to install OS for a server with the below steps, Downloaded the vmlinuz, initrd.gz from hd-media folder from the mirror Passed the preseed file at vmlinuz line like " /vmlinuz vga=normal url= http://server.domain.com/debian-preseed.cfg"; Then booted up the server with this kernel

vnc connection to install OS over network

Hi, How can we open the vnc connection when install OS from netinstall using preseed.cfg by passing the parameter in kernel command line? In centos we can use "vnc vncconnect=ip:port" on kernel command line and declaring the static IP on kickstart to get the vnc connection to monitor the OS insta

Unable to include files in kickstart

Hi, I want to include a file in kickstart that file contains all the partition informations. But when I try to include getting the below error, unable to open input kickstart file : could not open/read file:///tmp/partitions How to fix this issue and how can I get this file include? ___

Disk detection with kickstart

Hi, I have to provision the servers and all the servers are different disk types like hda, sda, xvda. So I have issue to detect the disk type itself with kickstart and make partitions. Does anyone have pre installation script that will do this job? ___ K

Re: [OPSEC] New IETF I-D about VPN traffic leakages (Fwd: New Version Notification for draft-gont-opsec-vpn-leakages-00.txt)

ering mechanisms in place? If that's the case then yes, VPN leakage here can be severe and detrimental. Thanks, KK On Mon, Oct 15, 2012 at 11:51 AM, Fernando Gont wrote: > Hi, folks, > > > We have published a new IETF I-D that discusses the VPN traffic-leakage > issues tha

Re: [OPSEC] OPSEC IETF85 Call for Agenda Items

Dear All, Just a reminder - Please send in your agenda items to us by 22 October 2012. Also, please note - 2012-10-22 (Monday): Internet Draft final submission cut-off by UTC 24:00 Thanks, KK, Gunter, Warren On Sun, Oct 14, 2012 at 3:44 PM, KK wrote: > Dear All, > > If you have a

[Ladon-dev-team] [Question #211653]: pass python list to ladon using suds

New question #211653 on ladon: https://answers.launchpad.net/ladon/+question/211653 I want to send a python list to my ladon service. Consider the following python list lst_col_title = [('1', 'Column1', 10, 'L'),(2, 'Column2', 15, 'L'),(3, 'Column3', 15, 'L'),(4, 'Column4', 10, 'L'),(5, 'Column

Re: [Ladon-dev-team] [Question #210927]: pdf file can't be send to suds(client) using ladon with SOAP protocol

Question #210927 on ladon changed: https://answers.launchpad.net/ladon/+question/210927 Status: Answered => Solved bibin kk confirmed that the question is solved: I soved the file transfer by using httplib. -- You received this question notification because you are a member of La

[hexayurt] Basic Sketchup

t uses Layers (so you can turn cans on/off) and gets you into using X-Ray views: MIDGE Gasifier Campstove by KK - 3D Warehouse - http://bit.ly/T5Fzka More info on this stove in my writeup: http://www.instructables.com/id/MIDGE-gasifier-campstove/ You can see screencaps of the Sketchup model th

[OPSEC] OPSEC IETF85 Call for Agenda Items

) submission by UTC 24:00 2012-10-22 (Monday): Internet Draft final submission cut-off by UTC 24:00 Regards, KK, Gunter, Warren ___ OPSEC mailing list OPSEC@ietf.org https://www.ietf.org/mailman/listinfo/opsec

Re: [algogeeks] Min Edges to be added to DAG to make it Strongly connected?

> > > > On Sat, Oct 6, 2012 at 7:37 PM, atul anand > > wrote: > >> find no. of cut vertex in the DAGthat will be the ans. >> On 6 Oct 2012 19:33, "KK" > wrote: >> >>> Given a DAG(Directed Acy

[algogeeks] Re: Help me find my Recursive algo complexity

Hi Vicky.. Its O(n^K) as u are iterating over all the elements of array for each of the k element subset!! On Monday, 8 October 2012 23:53:15 UTC+5:30, ((** VICKY **)) wrote: > > Hi, I wrote code for generating all possible sets of length k in a array > of length n. I did using recursion, but i'

[hexayurt] Re: Envirohaven - a hexayurt quad-dome based commercial product

On Tuesday, October 9, 2012 12:30:52 AM UTC-6, Vinay Gupta wrote: > > > http://envirohaven.com/ > > Look familiar? > > Does anybody have the time to figure out what, exactly, they think they > patented? There ought to be a patent application somewhere visible, if it's > been granted. > > It's ju

Re: [openflow-discuss] Regarding openroads snmp

you get started. https://docs.google.com/document/pub?id=1_4UkHdq_g-vRj5JhJniN9M4NwUD15KXUESzyOZuiAWE Regards KK On 8 October 2012 16:50, Nikhil Handigol wrote: > Hi Suganya, > > I'm not associated with the openroads project anymore. I'm cc'ing KK who > might be

[algogeeks] Min Edges to be added to DAG to make it Strongly connected?

Given a DAG(Directed Acyclic Graph). How to find out the minimum number of edges that needs to be added so that the given graph becomes Strongly Connected? -- You received this message because you are subscribed to the Google Groups "Algorithm Geeks" group. To view this discussion on the web v

[algogeeks] Min Edges to be added to DAG to make it Strongly connected?

Given a DAG(Directed Acyclic Graph). How to find out the minimum number of edges that needs to be added so that the given graph becomes Strongly Connected? -- You received this message because you are subscribed to the Google Groups "Algorithm Geeks" group. To view this discussion on the web v

[hexayurt] Re: HexaFrame MK1 Sketchup File

On Oct 5, 1:08 pm, "Vinay Gupta (Hexayurt Shelter Project)" wrote: > How much does Ubetshelter cost per unit? Unknown. I emailed the creator directly and no response. His phone number is in the .PDF brochures. Was not on my front burner. I'll step up the bugging and see. > So, yeah, it's path

[hexayurt] Re: HexaFrame MK1 Sketchup File

On Tuesday, October 2, 2012 5:29:57 AM UTC-6, Cody from Washington DC wrote: > > Ummm I'm not sure about you all, but i learned the basics of sketch up in > an afternoon. the tutorials are very simple and easy. > > Yes, I agree totally with your post. Sketchup is very easy to figure out. Will

[OPSEC] FYI: opsec - Requested session has been scheduled for IETF 85

-- Forwarded message -- From: "IETF Secretariat" Date: Thu, Oct 4, 2012 at 1:00 PM Subject: opsec - Requested session has been scheduled for IETF 85 To: k...@google.com Cc: opsec-...@tools.ietf.org, war...@kumari.net, gvand...@cisco.com, k...@google.com, w...@amsl.com

International SAP Projects Great opening for the position of Web Developer @ Los Angeles, CA

Dear Friends, Currently, I am recruiting candidates for one of my requirement as mentioned below. If you have a matching profile, please send me the updated resume along with contact details at the earliest. Job TitleWeb DeveloperProject Location    Los Angeles,

[sane-devel] Mustek ScanExpress A3 USB 1200 Pro

2012/9/8, Harald Vajkonny : > No ideas? > > Am 30.08.2012 08:51, schrieb Harald Vajkonny: >> >> I have a Mustek ScanExpress A3 USB 1200 Pro. >> >> sane-find-scanner -q returns: >> found USB scanner (vendor=0x055f [Hewlett-Packard.], >> product=0x040b [USB2.0 Scanner], chip=SQ113

Embedded Server Issue : SOLRJ : No Such Core Found

Hi, I am facing an issue while trying to use the solrj EmbeddedServer to load a core. I am trying to load the example/solr packaged with solr-3.6.1. It works perfectly fine through CommonHTTPSolrSever. I am able to query and fetch the document. I used the following jar files to compile and run.

[QUAD-L] Re: Is this inappropriate touching?

legs. Basically it is a slide over from chair to bed. Most times I can manage it alone. But the afternoon bed time requires watching if some help. Thank everyone for your answers. KK

[QUAD-L] Re: Is this inappropriate touching?

I would have if I had my speech machine with me. From now on I will "Always be prepared". KK From: Eric Batte To: KK Cc: quad-list@eskimo.com; Lainie Batte ; MS Quads Sent: Wed, September 12, 2012 10:03:51 AM Subject: Re: Is this inappropriat

[QUAD-L] Is this inappropriate touching?

was inappropriate but not sure what she expected to get out of her actions. It has made me feel uncomfortable & dread her coming today. Maybe I am being weird. What do you think about it? KK

Struts2 and GWT Intgration

Hi I am new in Struts2 technology, I am planning to develop a small web based ERP like application using Struts2 and GWT. I have some queries regarding this topic 1. Is Struts2 and GWT compatable each other? 2. Merits and demerits of integration in Struts2 and GWT ? 3. Have any other tool kit t

Re: [edk2] edk2-devel Digest, Vol 33, Issue 5

Content-Type: text/plain; charset="us-ascii" > > Sajeesh.K.K, > > Because the ideqval opcode not support bitwiseand nest in it, so > vfrcompiler reports this error. You can use the following expression to > meet your request: > suppressif (get(NVData.mybitmap) & 0x1

[edk2] Bitwise and operator in VFR file

Hello All, I have a question regarding the use of bitwiseand operator in suppressif statement. Basically i have a bitmap in the NVConfig structure. I need to selectively suppress some of the options to the user based on this bitmap. I have something similar to this. "suppressif ideqval NVData.

[hexayurt] Re: HexaFrame MK1

New Sketchup model file up: http://sketchup.google.com/3dwarehouse/details?mid=e68ef0d8aacda612fcbb44107e13de0d Slight fixes. Sept 03 2012 version. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to hexayurt@googl

[hexayurt] Re: HexaFrame MK1

Thanks! Well, now they can. The base deck is designed to bolt together in sections. Easy to transport. You could use all 2x8's in it if you were never planning on taking it apart. This is actually version two of a HexaFrame. I've got a much cooler version. People only understand 2x4's though.

Re: [fossil-users] Checkin [432306beca] causes minor annoyance with emacs vc.

Holy cow, Richard -- you're fast on those "stupid user tricks" responses! Oh, and uh ... oops. I mv'd it instead. Let's hope the other 2.5 emacs+fossil users don't make the same mistake. --kkinnell On Mon, 03 Sep 2012 12:22:01 -0700 Richard Hipp wrote: On Mon, Sep 3, 2012 at 3:12 PM, wrot

[hexayurt] Re: HexaFrame MK1 Sketchup File

*cue Twilight Zone music* On Sunday, September 2, 2012 11:47:49 AM UTC-6, KK wrote: > > 2x4 HexaFrame Shelter by KK - 3D Warehouse - http://bit.ly/T743bR > > Model has now been uploaded. > > Download Trimble Sketchup to view and dissect: > http://www.sketchup.com/intl

[Xen-API] NFS Storage Performance on XCP

Hi All, I have a problem on NFS storage performance in XCP 1.1 I have run several tests, with commands like this. I average over three tests with the same command: Write: dd if=/dev/zero of=./test1 bs=4M coubt=1024 oflag=direct Read: dd if=./test1 of=/dev/null bs=4M iflag=direct Case 1 : Storage S

Re: [hexayurt] HexaFrame MK1 Sketchup File

Sketchup. Free. Worldwide. Awesome. Truth is self-evident. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To view this discussion on the web visit https://groups.google.com/d/msg/hexayurt/-/D3UEbqzeT3YJ. To post to this group, send email to

Re: [hexayurt] HexaFrame MK1 Sketchup File

Sketchup is free. Worldwide. Download Sketchup...and my model...get to work. 5 minutes from NOW. What Ashlar product are you talking about? http://www.ashlar.com/shop/ They are very expensive to purchase a permanent license. Rutan can afford to use Ashlar. Monthly rental? No way. Nice try. Bzz

[hexayurt] Re: HexaFrame MK1

On Saturday, September 1, 2012 11:15:17 PM UTC-6, Gavin Harkness wrote: > > Nice work. > > > Thanks! Model is up now on Sketchup 3D Warehouse. Have at it KK -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To view t

[hexayurt] HexaFrame MK1 Sketchup File

2x4 HexaFrame Shelter by KK - 3D Warehouse - http://bit.ly/T743bR Model has now been uploaded. Download Trimble Sketchup to view and dissect: http://www.sketchup.com/intl/en/download/gsu.html O is "Orbit" (Rotate) H is "Hand" (Pan) Space always gets your mouse pointer back

[hexayurt] HexaFrame MK1

*drumroll* Announcing HexaFrame MK1: HexaFrame 2012 - KK - Picasa Web Albums - http://bit.ly/T5k9CZ This is a high strength 2x4 lumber frame for foam board (or other) sheathing. A full Trimble Sketchup 8 model file will be released shortly. The Sketchup file is a *real* architectural style

Re: [jpassion_web] Re: Want to store all the filed value of the database table to a Array

Its very simple   create the object of ResultSetMetaData and use the method getColumnCount()   cc  columncount while (rs.next()) {     for(int i=1; i wrote: From: Pankaj Jain Subject: Re: [jpassion_web] Re: Want to store all the filed value of the database table to a A

Re: [Ubuntu-zh] Gnome-shell如何用键盘关机

On Fri, Aug 24, 2012 at 7:53 PM, =KK= wrote: > ctrl+alt+t #打开终端,我设置成了 win+r > > sudo halt #关机 alias lll'= sudo service lightdm restart '#注销 -- 下一部分 -- 一个HTML附件被移除... URL: <https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20120824/88

Re: [Ubuntu-zh] Gnome-shell如何用键盘关机

ctrl+alt+t #打开终端,我设置成了 win+r sudo halt #关机 sudo service lightdm restart #注销 -- ubuntu-zh mailing list ubuntu-zh@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh

Few queries FreeBSD upgrade

List, I observe the following error while installing from ports collection for any ports in an old FreeBSD server "/usr/ports/Mk/bsd.options.mk", line 90: Malformed conditional (!defined(OPTIONS_DEFINE) || empty(OPTIONS_DEFINE:Monly)")) I tried the following 1) cvsup and make index throws

[android-porting] Re: Multiple openmax codecs

On Monday, November 2, 2009 5:57:08 PM UTC+5:30, Jean-François Vidal wrote: > Hi Anupama, > > > > I can't explain more because I never do the job. I use OpenMax codec > > but not inside OpenCore player. > > I am sure that any OMX component must come with the functions defined > > inside OMX_C

[Xen-API] xapi VDI.getPhysicalUtilisation not equals .vhd file size on disk in NFS

Hello all, I have a problem, We use XCP 1.1 and add a NFS volume on it. This NFS volume from a NFS Server which install on CentOS 5.6. When we provided many VMs in this SR, we find that the sum of all VDIs Physical Utilisation (get from xapi) in this SR greater than the SR's Physical Utilisation

Re: [fsug-tvm] Matlab for Linux

Hi All, I regularly work on repeating the results in IEEE papers, ie playing with applied mathematics. So far I have tried Octave, Scilab and Scipy. When mathematics is your concern, let me be very frank, none of the above come any where near Matlab for the reasons 1. Incredibly good documentatio

Re: [openflow-discuss] Problem with SNMP in NOX

First link on google... http://john.parnefjord.se/node/71 Regards KK On 30 July 2012 13:02, Prabhat Tiwary wrote: > Thanks KK ! > > Earlier, I compiled the subagents on a different machine and transferred > files using "./copy-all2ap.sh root@" command. > > This time

Re: [openflow-discuss] Problem with SNMP in NOX

Question: where did you compile the subagents? Try doing so on the PCEngine. Regards KK On 27 July 2012 14:32, Prabhat Tiwary wrote: > Hello KK ! > > Thanks a lot ! I had no idea how to debug this problem, so I did a fresh > setup of SNMP on my PC Engine Wifi AP from the

Configuring Apache SOLR with Multicore on IBM Websphere Application Server

Hi, I currently have Apache SOLR 3.6 running on Tomcat 7.0.27. I was able to successfully configure multicores too. This was my development environment and hence used tomcat - however the production environment is WAS. I need to migrate the existing multicores SOLR index from tomcat to WAS. Is th

Re: [openflow-discuss] Problem with SNMP in NOX

> 3. I ran a tcpdump on both eth0 and lo of controller (192.168.1.207 port > 6633), but couldn't find any SNMP packets. This is very suspicious (wrong). Can you debug if the subagent actually invoke the snmptrap command? Regards KK On 18 July 2012 13:02, Prabhat Tiwary wrote:

Re: [android-developers] how to flip the page similar to what Flipboard app does

Thanks Harri, I'll check it out. --KK On Mon, Jul 16, 2012 at 1:57 PM, Harri Smått wrote: > I played around with the idea - and this mockup works more/less properly. > Nothing too fancy but guess it would be possible to extend it for more > generalized usage. > > https

Re: [openflow-discuss] Problem with SNMP in NOX

* also do a tcpdump to make sure the controller ip address and port is correct. Check if you see snmp packets on lo. Let me know how it goes. Regards KK On 16 July 2012 12:23, Prabhat Tiwary wrote: > Thanks KK ! > > No, when I connect a client to the AP, I still have trap and wi

Re: [openflow-discuss] Problem with SNMP in NOX

Tell me another thing: if you connect a client, does the trap or wifi sub_agents stop running? Regards KK On 16 July 2012 11:41, Prabhat Tiwary wrote: > Thanks a lot KK ! > > When we run "/etc/init.d/openroads start" in the AP, only trap_subagent > and wifi_subage

Re: [openflow-discuss] Problem with SNMP in NOX

Hi Prabhat, (Please don't drop the mailing list) I am assuming the subagent is running and you have tested SNMP's agentx? The command line snmp trap bypass quite a few things needed by the subagent here. Does the keepAlive subagent actually works? That should be an indicator. Rega

[android-developers] how to flip the page similar to what Flipboard app does

hanks in advance! Regards, KK -- You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To unsubscribe from this group, send email to android-developers+unsubscr...@g

Re: [openflow-discuss] Problem with SNMP in NOX

disconnection), so it is harder to test that. Regards KK On 13 July 2012 21:17, Nikhil Handigol wrote: > Hi Prabhat, > > I'm cc'ing KK who now maintains the entire wireless project code including > the SNMP component of the wireless bicasting demo. > > -/\/ > >

Re: [Brygforum] Nu er det nemmere at køb udstyr fra USA

Pas meget på med shopUSA Jeg har i dag en erstatning sag kørende med dem som de er ved at løbe fra. De har knust mine varer for 14000,- kr. og de vil lige vende tilbage..den samme besked hver gang men kontakter dem. De har lige været i betalings standsning. mvh Hedebryg.dk - Original Mes

[fsug-tvm] FSUG at Technopark

Dear friends, Today I was approached by members of a technopark club 'Prathidwani' to give a session on GnuLinux. This is an opportunity for us to take up FSUG to technopark. What do you people think and what about having an FSUG get together at technopark? Jemshid -- "Freedom is the only law".

Re: [algogeeks] 4Sum

@Hemesh : +1 @Jalaj : read Hemesh's solution again it is for 4sum. In short, make a new array having sum of each unique pair of given array. -> O(n^2) sort it -> O(n^2) for each number bi in new array, binary search (target - bi) in the same array -> O(n^2) On Sunday, 17 June 2012 12:41:40 UTC+5

Re: [openflow-discuss] openflow in wireless

understanding of why the switch is constantly disconnecting. A tcpdump of the control traffic would help to reveal the truth too. Regards KK On 13 June 2012 19:30, Jesse Gross wrote: > On Thu, Jun 14, 2012 at 9:56 AM, Yeoh Chun-Yeow > wrote: >>> A: Wireless base stations generally onl

(ITS#7304) ldapc++ fails to build with gcc-4.7

Full_Name: Kacper Kowalik Version: 2.4.31 OS: Gentoo Linux URL: ftp://ftp.openldap.org/incoming/ Submission from: (NULL) (158.75.7.230) Currently ldap fails to build with gcc-4.7 with following error: SaslInteractionHandler.cpp:56:27: error: 'STDIN_FILENO' was not declared in this scope SaslInte

[algogeeks] Re: Permutations of a string

Thanks Gene :D On Tuesday, 8 May 2012 07:24:01 UTC+5:30, Gene wrote: > > You just need to make sure that the same character is never swapped to > the same position twice. Here is one way to do it. > > #include > #include > > void swap(char *s, int i, int j) > { > char t = s[i]; > s[i

[algogeeks] Re: problem

This problem is of ACM-ICPC kanpur online round 2012. you can find the solution here . On Sunday, 10 June 2012 16:37:33 UTC+5:30, payel roy wrote: > > Find the number of fractions a/b such that- > > 1. *gcd(a, b) = 1* > 2. *0 < a/b < 1* > 3.

Re: [algogeeks] Matrix Minimum Path Sum

The problem u are referencing is different one.. here u can move in all 4 directions! On Wednesday, 6 June 2012 18:43:15 UTC+5:30, Dheeraj wrote: > > http://www.geeksforgeeks.org/archives/14943 > > On Mon, Jun 4, 2012 at 7:57 PM, Decipher wrote: > >> @Victor - Someone had asked this question from

[DRE-maint] Bug#670829: Transition of rcov to new ruby policy/gem2deb

package: rcov severity: wishlist  i will try to transition this I am working on this Abhilash ___ Pkg-ruby-extras-maintainers mailing list Pkg-ruby-extras-maintainers@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pk

[hexayurt] Bender's Mods

Here is the link to Bender's mods on Flickr: http://flic.kr/s/aHsjzCUDsw Very cool twist on erecting and securing a Hexayurt. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To view this discussion on the web visit https://groups.google.com/d/msg

Re: [openflow-discuss] Openflow ncasting Client

you want more than pure bridging, then you can use OVS to rewrite the source MAC address too. There is a few choices in the solution space here. Hope this helps. Regards KK On 23 May 2012 14:01, Kevin Han wrote: > Hi KK, > > I have tried to use Open v switch to replace Hoolock by atte

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

Try to find out why. Good luck. Regards KK On 18 May 2012 10:52, Heming Wen wrote: > Hi KK, > > Ok, after examining the content of the packets using the Wireshark openflow > dissector, it seems that the message being blocked is slightly different > depending on the controller

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

Hi, some comments inline. Regards KK On 18 May 2012 08:17, Heming Wen wrote: > Hello again, > > It seems that the same problem persists with the PC Engine AP. The AP can > connect to the controller. However, once connected, it immediately > disconnects due to " no response

RE: CS> HIV

Hi, How effective is CS for treating HIV infection. Anyone has any experience or know of anyone who is using CS for treating HIV. Regards James.SS -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe:

Re: [SM-USERS] Single Sign On to Squirrel mail from another web application

ebug 2 TKTAuthDomain .mydomain.com TKTAuthTimeout 2w TKTAuthCookieExpires 2w TKTAuthRequireSSL off TKTAuthCookieSecure off ErrorLog /var/log/httpd-error.log CustomLog /var/log/httpd-access.log combined There is an existing IMAP account user: kk...@

[SM-USERS] Single Sign On to Squirrel mail from another web application

List, I have a plone 4.1.4( CMS) installation, and a squirrel mail web client running on different machines but under the same domain. say intranet.mydomain.com and webmail.mydomain.com I am trying to implement a SSO for this plone intranet site and Squirrel Mail client. ( The plone site is

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

, thanks to Brandon and others' hard work. Regards KK On 11 May 2012 11:10, Heming Wen wrote: > Hi KK, > > I am using a controller running on a VM in Virtualbox under bridged mode with > its own IP address (192.168.1.203). In order to capture the packet in a > cleaner fashion,

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

Can you grab a tcpdump of the controller traffic and take a look there? Why is the controller going silent? It should have some keep-alive going. Which switch would this be on the AP? Regards KK On 10 May 2012 13:56, Heming Wen wrote: > Hi KK, > > Here is a "slice" of

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

Hi, If you are having the connection to AP come and go, you are probably having a connection. Question is why is the AP disconnecting. Look at the log of the controller. That should say something. Regards KK On 10 May 2012 12:30, Dan Talayco wrote: > Sorry for the non-specific respo

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

Hi Heming, Some comments inline. Regards KK On 10 May 2012 09:18, Heming Wen wrote: > Hi KK, > > In terms of physical hardware, I believe we have the exact same set of > hardware mentioned in the Stanford OpenRoads testbed. We are using PC Engine > AP and Pronto 3290 switc

Re: [openflow-discuss] Openflow ncasting Client

Hi Kevin, For n-casting you will not need Hoolock. I suggest you use OVS instead. That is sufficient for n-casting. Regards KK On 10 May 2012 08:08, Kevin Han wrote: > Hello, > > I'm trying to recreate the openflow n-casting demo and I have a quick > question about the Cli

Re: [openflow-discuss] OpenRoads controller link with PC Engine AP

Hi Heming, One way is to have only the AP in inband mode. Get your switch to the controller, then make sure the controller is also accessible to the AP on the datapath. We have had such a setup before. It should work. Regards KK On 9 May 2012 18:42, Heming Wen wrote: > Hi Dan, > >

Re: [openflow-discuss] Openflow Wireless n-casting

ess. Hope this helps. Regards KK On 9 May 2012 07:54, Kevin Han wrote: > Hi, > > I'm trying to run the openflow n-casting demo. The demo uses the "bicast" > controller which I downloaded off the wiki page. However, I can't figure out > how to compile the control

Bug#670829: Transition of rcov to new ruby policy/gem2deb

package: rcov severity: wishlist  i will try to transition this I am working on this Abhilash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

[hexayurt] New Falconboard

>From the makers of Hexacomb cardboard: http://www.falconboard.com/en-us/build/applications.aspx Comes in standard 4x8 sheets. Many thicknesses. "Works with most commercial connective systems such as edge tape, plastic or metal edging, and channels Superior strength over traditional corrugated an

[orkut-developer] Please Remove My App - 50760465581

Hi, I just got a mail saying my app id 50760465581 failed review and needs to be fixed with 14 days. However, I am not into maintaining this anymore due to some reasons. Please can you remove this app. Thanks, KK -- You received this message because you are subscribed to the Google Groups

[Desktop-packages] [Bug 828756] Re: getting "connection is untrusted" warnings

Can be fixed with https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/828756/comments/39 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/828756 Title: getting "connection is untrust

[Openjdk] [Bug 828756] Re: getting "connection is untrusted" warnings

Can be fixed with https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/828756/comments/39 -- You received this bug notification because you are a member of OpenJDK, which is subscribed to ca-certificates-java in Ubuntu. https://bugs.launchpad.net/bugs/828756 Title: getting "connection is unt

[Bug 828756] Re: getting "connection is untrusted" warnings

Can be fixed with https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/828756/comments/39 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/828756 Title: getting "connection is untrusted" warn

[Bug 828756] Re: getting "connection is untrusted" warnings

Can be fixed with https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/828756/comments/39 -- You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/828756 Title: getting "connection is untr

[Desktop-packages] [Bug 828756] Re: getting "connection is untrusted" warnings

** Changed in: empathy (Ubuntu) Status: Invalid => Confirmed ** Changed in: empathy (Ubuntu Oneiric) Status: Invalid => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net

[Openjdk] [Bug 828756] Re: getting "connection is untrusted" warnings

** Changed in: empathy (Ubuntu) Status: Invalid => Confirmed ** Changed in: empathy (Ubuntu Oneiric) Status: Invalid => Confirmed -- You received this bug notification because you are a member of OpenJDK, which is subscribed to ca-certificates-java in Ubuntu. https://bugs.launchpad

[Bug 828756] Re: getting "connection is untrusted" warnings

** Changed in: empathy (Ubuntu) Status: Invalid => Confirmed ** Changed in: empathy (Ubuntu Oneiric) Status: Invalid => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/82

[Bug 828756] Re: getting "connection is untrusted" warnings

** Changed in: empathy (Ubuntu) Status: Invalid => Confirmed ** Changed in: empathy (Ubuntu Oneiric) Status: Invalid => Confirmed -- You received this bug notification because you are a member of Ubuntu Desktop Bugs, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.

Re: [QUAD-L] Anyone Spotted the New Stimulite Cushion

>From what I Googled, it was a cover that you put on your cushion. I need something new. KK From: "ambassa...@hushmail.com" To: quad-list@eskimo.com Sent: Mon, March 19, 2012 8:18:14 PM Subject: Re: [QUAD-L] Anyone Spotted the New Stimulite

[QUAD-L] Wounded Warrior Home Project

http://blog.amsvans.com/53818-wounded-warrior-home-project-builds-accessible-homes-for-injured-veterans/

[jruby-dev] [jira] (JRUBY-6535) TypeError: can't convert Java::OrgRacobCom::Variant into Array transpose at org/jruby/RubyArray.java:1036

kk created JRUBY-6535: - Summary: TypeError: can't convert Java::OrgRacobCom::Variant into Array transpose at org/jruby/RubyArray.java:1036 Key: JRUBY-6535 URL: https://jira.codehaus.org/browse/JRUBY

<    2   3   4   5   6   7   8   9   10   11   >