Can we expect something intelligent.
The only thing I can give you off line is a kick on your
backside.Actually, I dont have time for it.Give me your
VP's mail id. He might do it better.
I don't usually step in to these little squirmishes,
but this is just plain rude.
Please, if you don't
Two T1's going to the same ISP? Why not use PPP and make one big pipe? I
like simple answers.
Check your port/speed/duplex settings on the new switch.
Many times ISPs won't do PPP multilink due to the overhead it
introduces.
I've found CEF per-packet to meet my company's needs. We
have
3620 with 128 megs of ram should be fine.
That's not doable.
Refer to the following URL for 3600 series memory
configuration options:
http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/544_pp.htm
_
FAQ, list archives, and subscription info:
show ip spd
show int blabla switching' has some extra info too.
Interesting. This led me to try "ip spd" in global
config, which gave me the following:
2610-lab3(config)#ip spd
% Incomplete command.
Oh? This prompted me to check Bert Boerland's
DOTU (Document the Undocumented)
Anyone know how to make a router become a DHCP client?
I try to make my Cable Modem (PPP) connection to connect with a router.
The Cable give me a Ethernet and I connect this to my 2501 Ethernet port.
For Ethernet interfaces to behave as DHCP clients, you will
need 12.1(x)T. I know a
a LD416 $1500-$2000
You really think that's it? These units list at $9995.
Even used, one would think you could net more then
$2000.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Nooo. To find CIR through Bandwith statement is not a right criteria becausee
if we are using IGRP/EIGRP , we need to play with Bandwidth statement to
select primary and secondary routes so we might need to change them different
as Actual CIR,..
True, but "show frame map" IS the actual
Well is this BW statement based on the bandwith statement entered in the
config for a routing protocol to use? I dont think this command will give
you the acutal CIR of the circuit.
I maybe wrong...let me know.
The BW statement in the "show frame-relay map" command represents
the CIR as
Next step - He wants a a proxy server running squid on BSD
(don't think so) so that the whole LAN can be NAT.
I'm confused by this. You don't like squid, or you're pointing
out that squid has nothing to do with NAT?
squid does a GREAT job. I've got 1200 clients going though
an old P2/266
got this response from Cisco when I inquired about Lab scheduling
( and no I have no intention of being in Nova Scotia in February.
I'm trying to convince my employer to send me to Sao Paolo ;- )
Chuck
-Original Message-
From: Christine Jeffrey [mailto:[EMAIL PROTECTED]]
does there any irc server/channel to talk about Cisco matters...whether
certificaion,books, problems etc
would appreciate if you could let me know the irc server and channel name.
#cisco on efnet
Ha. I hope you're kidding.
You'll get kicked darned quick if you come in talking
I believe CAR is only going to be available on the 12000 GSRs, 7000's, and
7500's. The PFC will provide the functionality you are looking for.
Huh?
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int s0
Router(config-if)#rate-limit input ?
Hi all
Can anyone share with me experience on how to do
bandwidth control using 6509 switch with MSFC PFC.
Basically, I have a number of VLANS created on the
Ethernet module and I would like to limit the amount
of bandwidth for each VLAN. (eg. VLAN10 - 1Mbps and so
on)
Also, can this
1. What does the process Layer 3 switching refer to?
"switching" has become a convuluted term.
"switching", in marketing-speak, means "fast" for all
intents and purposes.
Thus, "L3 switching" is "fast routing".
Have fun.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
I thought only the RSM rounds IOS?
Well, be careful. RSM infers the 5000 series, in which
case you'd be correct; the Catalyst 5000 series Sups only
run the CatOS.
On the 6000 series, though, you can run "Native IOS" mode
on the whole box; both the Supervisors (the "switching"
side) and the
I think this guy abused the mailing list and spammed us.
Actually, I believe they harvested all of Usenet. I post
under a mailalias, and I got 23 emails to that mailalias
from those guys.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
A while back I read about a utility that would compress an IOS image,
but still allow you to use it. I found that I had archived a copy on a
CD, so I tried it out. It compressed a 14MB image down to 4.5MB. I
TFTP'd the compressed image to my 2524 and it rebooted. Upon reboot,
however, it
And by default, most current Cisco routers already have Fast Switching or
better enabled (unless extended IP access lists are applied, if I remember
right).
I think this is an outdated statement, although I do not know
what IOS release(s) changed this thought. On a 2500 running
12.1(2) IP:
There are some multimedia port numbers on Clayton Dukes excellant site.
I didn't know port 123 was NTP-Network Time Protocol..did ya'll?
HTH, www.gdd.net
Dale CCNA
cat /etc/services
___
UPDATED Posting Guidelines:
I have a problem when I dial in to a 2610 router; the router has a U.S.
Robotics modem attached via the console port. Upon dialing in, I get a
connection but no login prompt. When I telnet in to the router at the same
time and configure something on the router, the terminal window which I
after adding the line "modem dialin" to my aux port config line, I now get a
password prompt; the problem I have now is that the password prompt doesn't
respond to my keyboard, the passwords just time out. What could be the
reason for this ?
Thanks in advance for your help.
Interesting
Why is that on the software documentation on the 6000/6500 series of the
Catalyst switches say "Ports in an EtherChannel need not be contiguous
or on the same module"? I had studied the etherchannel architecture on the
5500 series and in fact, the links or ports does need to be configured
22 matches
Mail list logo
