Hi all
I have T1 Csu/dsu card on 2691 platform
Whenever I execute any service module command it gives the following error
Example:command given service module t1 clock source internal
%Serive moduule command failed,Lock timeout error
Can any body guide me out what is this error
why I am unable to
Sorry the exact error is
%Serive module command failed,Lock obtain timeout
Monu Sekhon wrote:
Hi all
I have T1 Csu/dsu card on 2691 platform
Whenever I execute any service module command it gives the
following error
Example:command given service module t1 clock source internal
%Serive
all the
commands end up the in the running config?
3) There's some sort of timing issue.
To fix the problem:
Don't do copy and paste that fast. :-)
Priscilla
Monu Sekhon wrote:
Hi Mark,
Thanx for reply.but I mentioned that when we do shut no
shut
again link
Hi ,
DTE end commands on the end routers r1 and r3 has no effect whhether u give
or not so not at all problem . yes they dont appear in running-config thats
true as by default is dte device(routers)
another thing as others suspect it could be wrong cable problem(probably DTE
and DCE end) . try
it last on each interface you
configure.
-Mark
-Original Message-
From: Monu Sekhon [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 20, 2003 7:40 PM
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay issue [7:63446]
Hi Larry/John,
I forgot to mention no shut in the above confif
Hi All
Hey I am facing a strange problem in frame-relay
My config
--
my initial config
int serial 0
(nothing confgured initially)
Then I cut paste this config and my link does not come up means Interface
does not come up.
interface Serial0
shut (if i give here no shut then link comes
to be no shut in order for the logical
interface to work...
--
Larry Letterman
Network Engineer
Cisco Systems
Monu Sekhon wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All
Hey I am facing a strange problem in frame-relay
My config
--
my initia
Hi Again ,
A new small query on frame-relay itself.
Is the config below valid and can it be used having both Multipoint on main
interface and poin-to-point sub interface simutaneusly.
int serial 0
encap frame-relay
ip address
frame-relay interface-dlci 16
int serial 0/0.2 multi
ip address
Thanx Kaj Logan
I have gne through document .
thanx for the information.
My doubts are cleared:-)
Kaj J. Niemi wrote:
In mail.net.groupstudy.pro, you wrote:
-will the connection
, Daniel E. wrote:
If you ping you are probably pinging the Local IP.Try
debug
ip
icmp to
verify what you are pinging.
Daniel Ladrach
CCNP, CCNA
WorldCom
-Original Message-
From: Monu Sekhon [mailto:[EMAIL PROTECTED]]
Sent
Hi Harold/all,
In your description u mentioned that u can use /31 mask also,
Your comments:
Since the point-to-point link is likely to have a /30 (or /31 if they're
running 12.2) mask on it
questions is
-
-will the connection work , till now i only know that 30 is the max mask
Thanx,
for instant reply.
I am referring to have same ip on the serial interfaces of client router.
Again I will show u my topolgy
client-routerserver-router(isp)
2serial intf 2 serial intf
serial 0 -ip add- 1.1.1.1 serial 0 ip add- 1.1.1.2
serial 1 -ip
. Unless
you've confused me (it doesn't seem I would be the only one),
then the
answer might not be the same.
- Original Message -
From: Monu Sekhon
To:
Sent: Monday, February 10, 2003 12:13 AM
Subject: Simple Ip issue (need help) [7:62728]
Hi All,
I have very simple question
Hi All,
I have very simple question, Can we use duplicate ips on serial interfaces
among them seleves although we cannot use duplicate ip on serial with
Ethernet(lan interface) or loopback interface.
My topology is like this
Client router server router(connected back to back)
2 interfaces
14 matches
Mail list logo