Good Evening,
Both bands were weak and unstable, here one minute, gone the next.
However, QSB improved signals enough to copy some of what you were
sending. I was switching from one antenna to the other. I could hear
better on one and you could hear better on the other. Roy remarked on
I buy all my hook up wire from All Electronics in the L.A. area. But I don't do
super special type of electronics, just general stuff. I wind almost all my
antenna toroids with their wire. Mike n6zw
> On 05/02/2021 2:06 PM Mark Goldberg wrote:
>
>
> If you want the best, super easy to solder
Thank you, real good information. We need more info such as this.
73, Lou KE1F
On 5/2/2021 21:33, Chris Waldrup wrote:
Hi,
I use the M22759 series for everything I build both at my home shop and lab at
work, a large defense related company.
It's inexpensive and Teflon insulation.
I bought 20
Hi,
I use the M22759 series for everything I build both at my home shop and lab at
work, a large defense related company.
It's inexpensive and Teflon insulation.
I bought 2000 ft of #18 last week for work and it's right at 12 cents a foot.
It doesn't melt when you solder to it and is easy to
If you want the best, super easy to solder and strip, there is M16878/4.
M16878/5 or M16878/6 Silver plated stranded Copper wire with Teflon
insulation. It is very expensive and I can't see where to buy small
quantities except on eBay where it may be sketchy. /4 is probably most
typical 600V insula
Dana:
I had a problem w/ a chirp on one of my radios. It was a s/n 8xxx with the
old synthesizer. I first noticed "dead spots", primarily on 40 and 160.
These dead spots would be a specific point. There were several and they
were repeatable. I got some reports of bad chirps and figured out tha
On 5/2/2021 5:42 AM, Joe Subich, W4TV wrote:
That modification is by GM3SEK (about 2015).
Yes, I remember that, and it looked good.
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
My son has been having trouble with the quality of hook-up wire he's
able to buy for his projects. There's clearly a difference in vendors.
I'm sure Elecraft uses the best. Any help here?
david
KC1DNY
in the woods of Maine
__
Elecraf
In my design, you can make the changes to a steppir on a tower if you
can reach your passive 6M element. You don't have to order any
parts to make this work.
The GM3SEK modification can also be made "on the tower" as both the
new elements are less than 4 feet from the mast. Ian spent consid
There is always an ongoing discussion about this in the SteppIR forum on
groups.io. The key to making the SteppIR antennas anything more than
pathetic on 6M is adding a fixed reflector. Some in the group have modeled
and developed 6M antennas on the same boom that rival commercial monobanders
on
I added the 6M element and wasn't happy with the performance.
I remodelled it and I was able to improve a number of things and posted the
measurements on my QRZ page if you are interested.
Not only did it model better it performed better and loaded better as the
SWR was lower. A bunch of my fr
On 2021-05-02 3:59 AM, turnbull wrote:> Dear OMs and YLs,I believe if
you check online there is a
modification to mounting the additional parasitic element possibly
even adding yet another which is supposed to greatly improve the
three element SteppIR six meter performance over that of the three
Dear OMs and YLs,I believe if you check online there is a modification to
mounting the additional parasitic element possibly even adding yet another
which is supposed to greatly improve the three element SteppIR six meter
performance over that of the three element with the single parasitic eleme
13 matches
Mail list logo