Went for $2555. People spend more on a card game... or kids...
On Wed, Jan 25, 2012 at 2:20 AM, Dave e...@dc9.tzo.com wrote:
On 1/25/2012 12:31 AM, Stuart Stevenson wrote:
since I am about 5 miles from the base a second trip would not be a
problem - if I forgot some paperwork
On Thu, 2012-02-02 at 21:53 -0500, BRIAN GLACKIN wrote:
Went for $2555. People spend more on a card game... or kids...
I paid around $2000 for my Shizouka, in good shape, with Bandit, tool
changer and some tooling. Hopefully, at this price, the buyer is serious
about restoring it.
--
Kirk
On Mon, Jan 23, 2012 at 10:20 PM, Stuart Stevenson stus...@gmail.comwrote:
The motor was probably removed by the same process that modified the
control boxes.
That's pretty sad to see. It really looks like the whole thing has been on
its side, and it's hard to believe there isn't significant
On 22 January 2012 08:07, a...@conceptmachinery.com wrote:
why retrofit bridgeport machine when one can buy cnc machine X 50 Y 26
travel CNC mill for $6.5 k
That machine cost $85k new, so the standard of bearings, castings,
screws etc is likely to be a lot better than a built-down-to-a-price
On 1/24/2012 3:49 AM, Eric Keller wrote:
On Mon, Jan 23, 2012 at 10:20 PM, Stuart Stevensonstus...@gmail.comwrote:
The motor was probably removed by the same process that modified the
control boxes.
That's pretty sad to see. It really looks like the whole thing has been on
its
On Tue, Jan 24, 2012 at 9:18 PM, Mark Cason farmerboy1...@yahoo.com wrote:
On 01/23/2012 11:58 AM, Stuart Stevenson wrote:
If no one on this list buys this machine I will bid on it. This machine
is
on the Air Force Base. If I can, I will pick it up for anyone that buys
it.
I have never
On 1/25/2012 12:31 AM, Stuart Stevenson wrote:
since I am about 5 miles from the base a second trip would not be a
problem - if I forgot some paperwork
That is extremely convenient. :-)
The last two base visits I had the GL guy met me at the gate and I
followed his car back to
If no one on this list buys this machine I will bid on it. This machine is
on the Air Force Base. If I can, I will pick it up for anyone that buys it.
I have never been on the base before so I don't know their rules. I will
try to find out.
Stuart
On Sun, Jan 22, 2012 at 6:34 PM, Karl Schmidt
On Mon, 2012-01-23 at 11:58 -0600, Stuart Stevenson wrote:
If no one on this list buys this machine I will bid on it. This machine is
on the Air Force Base. If I can, I will pick it up for anyone that buys it.
I have never been on the base before so I don't know their rules. I will
try to find
I've bought from Government Liquidation before.
They usually do exactly what they specify. If they says users loads
.. it is your job to get the machine moved from where it is to your
trailer etc. Don't expect any help at all.
(You might want to ask how close you can get your truck/trailer
Kirk Wallace wrote:
On Mon, 2012-01-23 at 11:58 -0600, Stuart Stevenson wrote:
If no one on this list buys this machine I will bid on it. This machine is
on the Air Force Base. If I can, I will pick it up for anyone that buys it.
I have never been on the base before so I don't know their rules.
On Mon, Jan 23, 2012 at 3:36 PM, Ed ate...@mwt.net wrote:
Kirk Wallace wrote:
On Mon, 2012-01-23 at 11:58 -0600, Stuart Stevenson wrote:
If no one on this list buys this machine I will bid on it. This machine
is
on the Air Force Base. If I can, I will pick it up for anyone that buys
it.
Controller (EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] OT: Possible Retrofit candidate for someone in the
heartland
Kansas is just too far for me.
http://www.govliquidation.com/auction/view?auctionId=4975994
Looks like the were a litte agressive on the control system
On 01/22/2012 02:07 AM, a...@conceptmachinery.com wrote:
Hi
why retrofit bridgeport machine when one can buy cnc machine X 50 Y 26
travel CNC mill for $6.5 k
those bridgeport will have similar price anyway.
After one will buy used machine, beside retrofit controller with EMC2 need
to learn
That machine was likely dropped on the bottom corner of the control
panel and then it roller over and hit the operator panel.
That machine could have a lot of problem besides the controls depending
on how far it fell.
Notice that no loading assistance will be provided, perhaps the moron
who
Interesting - I have a similar Wells Index waiting for some free time to
retrofit LinuxCNC on.
These were good machines, a lot used by the navy. Good manufacture support -
they have records based
on serial number - you can ask them about it before you buy.
Kansas is just too far for me.
http://www.govliquidation.com/auction/view?auctionId=4975994
Looks like the were a litte agressive on the control system with the
forklift.
--
Keep Your Developer Skills Current with
-users] OT: Possible Retrofit candidate for someone in the
heartland
Kansas is just too far for me.
http://www.govliquidation.com/auction/view?auctionId=4975994
Looks like the were a litte agressive on the control system with the
forklift.
Ahh, they just tenderized it a little...
There's
On Friday, January 20, 2012 12:35:37 PM BRIAN GLACKIN did opine:
Kansas is just too far for me.
http://www.govliquidation.com/auction/view?auctionId=4975994
Looks like the were a litte agressive on the control system with the
forklift.
Look again. They obviously intended that machine to
19 matches
Mail list logo