That does not seem to affect the system separator. Oh. well I only
have a couple of cases where this is a problem so I can work around
it. Someone pointed out that there is old case where someone asked for
system-system spacing control at a score level. Perhaps more control
of the syst
It might be easier to get the output you want by modifying the spacing of
the VerticalAxisGroup created by the Lyrics context.
On Sat, Oct 5, 2024, 11:19 AM Knute Snortum wrote:
> On Sat, Oct 5, 2024 at 7:51 AM Walt North wrote:
>
>> For example I was hoping to change the system system spacing
On Sat, Oct 5, 2024 at 7:51 AM Walt North wrote:
> For example I was hoping to change the system system spacing and or the
> system separator between different sections. These are in the paper block.
> Different sections have have varying number of lyric stanza lines and the
> automatic spacing
post for one such example.
On Fri, Oct 4, 2024, 10:18 AM Knute Snortum wrote:
> On Fri, Oct 4, 2024 at 9:31 AM Walt North wrote:
>
>> I have tried \noPageBreak at various places but none seem to have any
>> impact on the automatic page break between book parts (\bookpart)..
&
On Fri, Oct 4, 2024 at 9:31 AM Walt North wrote:
> I have tried \noPageBreak at various places but none seem to have any
> impact on the automatic page break between book parts (\bookpart)..
>
Ah yes, book parts force a page break between parts. Can you use just
\scores? Fo
I have tried \noPageBreak at various places but none seem to have any
impact on the automatic page break between book parts (\bookpart)..
On 10/2/2024 10:55 AM, Knute Snortum wrote:
On Wed, Oct 2, 2024 at 7:10 AM Walt North wrote:
I have some use cases where I may want to change one or
On Wed, Oct 2, 2024 at 7:10 AM Walt North wrote:
> I have some use cases where I may want to change one or more \paper block
> values for some system lines. I tried \bookpart but that is forcing page
> breaks.
>
>- Is there anyway to suppress the page break?
>
>
Try \no
.
* Is there anyway to suppress the page break?
* Is there anyway to temporarily change some \paper values?
Below is minimum example using the system separate as an example. The
result spreads across two pages.
Thanks, Walt North
\version "2.24.4"
ch = \chordmode { c1 c c c }
lyA =
I have some use cases where I may want to change one or more \paper
block values for some system lines. I tried \bookpart but that is
forcing page breaks.
* Is there anyway to suppress the page break?
* Is there anyway to temporarily change some \paper values?
Below is minimum example
}
> \bookpart {
> :: and the next score, and so forth ::
> }
> }
>
> One note - using \bookpart inserts a page break between parts, so no need
> for any explicit \pageBreak commands. For some more details have a look at:
>
> http://lilypond.org/doc/v2.24/Documentation/notation/multiple-scores-in-a-book
> --
> Michael
>
>
, and so forth ::
}
}
One note - using \bookpart inserts a page break between parts, so no need
for any explicit \pageBreak commands. For some more details have a look at:
http://lilypond.org/doc/v2.24/Documentation/notation/multiple-scores-in-a-book
--
Michael
Hello,
(Note: Lilypond v. 2.24.2, in Linux.)
I am setting a group of pieces; each piece is in its own score block. I
want each score to start on a new page, and the final page in each score to
have a ragged-last-bottom, so that the systems are evenly spaced - these
are duets, and I like no more
On Sun, 9 Jul 2023 at 13:10, Jean Abou Samra wrote:
> Le samedi 08 juillet 2023 à 17:44 +1000, Vaughan McAlley a écrit :
>
> When a staff-switch line goes over a page break, the first system in the
> next page is stretched and may cover the next system. In the example here,
> it
; When a staff-switch line goes over a page break, the first system in the
> next page is stretched and may cover the next system. In the example here,
> it nearly touches, but in a full score the top system is stretched beyond
> the bottom of the page.
>
> In the wild, a system may stret
Le samedi 08 juillet 2023 à 17:44 +1000, Vaughan McAlley a écrit :
> When a staff-switch line goes over a page break, the first system in the next
> page is stretched and may cover the next system. In the example here, it
> nearly touches, but in a full score the top system is stretched b
Hi,
When a staff-switch line goes over a page break, the first system in the
next page is stretched and may cover the next system. In the example here,
it nearly touches, but in a full score the top system is stretched beyond
the bottom of the page.
In the wild, a system may stretch over the
determine what
exactly is causing the bad page-breaking results, maybe you are
using the optimal-page-turn algorithm for example.
Thanks for reminding me about the various page break algorithms.
I’d found that when I last had a chance to work on this project
Le lundi 24 avril 2023 à 23:33 -0400, Joel C. Salomon a écrit :
> I’m getting close to finished with my first Lilypond project, a book of some
> 30 scores. I tried building the `\book` section piecemeal, including a
> handful of scores and tweaking the page breaks, and then another batch, and
Dear Joel,
I think that using multiple bookparts is a perfect strategy for this
document based on this example, in which each score should nicely start
on a new page.
Without any minimal examples, it is hard to determine what exactly is
causing the bad page-breaking results, maybe you are us
I’m getting close to finished with my first Lilypond project, a book of
some 30 scores. I tried building the `\book` section piecemeal,
including a handful of scores and tweaking the page breaks, and then
another batch, and so on.
\book {
\scoreI
\pageBreak
\scoreII
\pageBreak
\scoreIII
Le mercredi 15 mars 2023 à 22:49 +0100, Jean Abou Samra a écrit :
> -
> use `-dseparate-page-formats=pdf` if you want to get one output file per page
> (or per system if also using lilypond-book-preamble.ly),
>
>
> -
> use `-dtall-page-formats=pdf` if you want to get squashed pages.
P.S. Can
Le mercredi 15 mars 2023 à 17:32 -0400, Fr. Samuel Springuel a écrit :
> The attached file compiles differently under 2.22 and 2.24: 2.24 introduces a
> page break that isn’t present in 2.22. This is causing some havoc in my
> lyluatex tool chain. Any idea what’s causing the problem a
The attached file compiles differently under 2.22 and 2.24: 2.24 introduces a
page break that isn’t present in 2.22. This is causing some havoc in my
lyluatex tool chain. Any idea what’s causing the problem and how to fix it?
convert-ly doesn’t change anything in the file when upgrading the
> On 17 Nov 2021, at 13:42, Robert Schmaus wrote:
>
> Dear Ponderers,
>
> I was just about to quickly write down a sheet of music, nothing fancy at
> all, when all of a sudden I got an exception. This is the full ly code (and I
> can’t make it any shorter for the reasons explained below):
>
Quick Update: The exception did indeed disappear after entering some more
music. Header is also no problem anymore …
I just hope, it stays like this when I get to the end of the music …
> On 17. Nov 2021, at 13:37, Robert Schmaus wrote:
>
> Dear Ponderers,
>
> I was just about to quickly wr
This compiled fine for me on lilypond 2.23.3, except for the warning about the
empty ChordNames.
On lilypond 2.20 I got an error message similar to yours (without the filename
weirdness), but it compiled fine if I commented out the ChordNames line or
typed something into its music expression. I
Dear Ponderers,
I was just about to quickly write down a sheet of music, nothing fancy at all,
when all of a sudden I got an exception. This is the full ly code (and I can’t
make it any shorter for the reasons explained below):
\version "2.20.0"
\header {
title = "Sinfonia No. 2 C-Dur"
Il giorno sab 3 nov 2018 alle 14:38, Sven Axelsson
ha scritto:
On Sat, 3 Nov 2018 at 13:15, Thomas Morley
wrote:
Am Sa., 3. Nov. 2018 um 13:16 Uhr schrieb Sven Axelsson
:
>
> I want to auto generate a collection of short tunes by
\include-ing the existing files. If there is room for it, I
On Sat, 3 Nov 2018 at 13:15, Thomas Morley wrote:
> Am Sa., 3. Nov. 2018 um 13:16 Uhr schrieb Sven Axelsson
> :
> >
> > I want to auto generate a collection of short tunes by \include-ing the
> existing files. If there is room for it, I want to put several tunes on the
> same page, but I only wan
Am Sa., 3. Nov. 2018 um 13:16 Uhr schrieb Sven Axelsson
:
>
> I want to auto generate a collection of short tunes by \include-ing the
> existing files. If there is room for it, I want to put several tunes on the
> same page, but I only want page breaks between tunes, never in the middle of
> a t
I want to auto generate a collection of short tunes by \include-ing the
existing files. If there is room for it, I want to put several tunes on the
same page, but I only want page breaks between tunes, never in the middle
of a tune. We can assume that no tune takes up more than one page.
I can of
eSignature.stencil = #ly:text-interface::print
> \override Staff.TimeSignature.text =
> \markup \override #'(baseline-skip . 0) \center-column \number {
> \concat {
> "4"
>
> }
> \concat {
>
> \tiny "√"
>
This score fragment follows up on Lilypond code originally posted by Hans
Åberg and Malte Men back in June, 2014, on this forum. I've carried the
notation a little bit farther.
The question I have is: how the devil to generate a proper page break in a
score like this?
If there's a m
> I found an old post [1] that seems to state that it is needed to
> enclose each portion in a different \book block (?).
>
> Can anybody confirm? Or explain the better way to force page break
> from within a .ly file, to happen in the lilypond-book tex file?
I'm not experienced
state that it is needed to
> enclose each portion in a different \book block (?).
>
> Can anybody confirm? Or explain the better way to force page break
> from within a .ly file, to happen in the lilypond-book tex file?
I'm not experienced with lilypond-book, but is it as simple as
ortion in a different \book block (?).
>
> Can anybody confirm? Or explain the better way to force page break
> from within a .ly file, to happen in the lilypond-book tex file?
I'm not experienced with lilypond-book, but is it as simple as
using \bookpart to make the page breaks? Or
gt; Can anybody confirm? Or explain the better way to force page break
> from within a .ly file, to happen in the lilypond-book tex file?
I'm not experienced with lilypond-book, but is it as simple as
using \bookpart to make the page breaks? Or are you trying to
make \pageBreaks within a \s
e better way to force page break
> from within a .ly file, to happen in the lilypond-book tex file?
I'm not experienced with lilypond-book, but is it as simple as
using \bookpart to make the page breaks? Or are you trying to
make \pageBreaks within a \score? I think you might need to give
more
- Original Message -
From: "Alberto Simões"
To: "lilypond"
Sent: Saturday, May 14, 2016 3:34 PM
Subject: Page Break in Lilypond-book
Hi
It seems that \pageBreak is not honored by Lilypond.
I found an old post [1] that seems to state that it is needed to enclos
Hi
It seems that \pageBreak is not honored by Lilypond.
I found an old post [1] that seems to state that it is needed to enclose
each portion in a different \book block (?).
Can anybody confirm? Or explain the better way to force page break from
within a .ly file, to happen in the lilypond
...@gnu.org] On Behalf Of Carl
Peterson
Sent: woensdag 30 december 2015 8:11
To: lilypond-user@gnu.org
Subject: Question about page break time indices
All,
I am involved in some choral
recording projects where we are
having the singers sing from
projected slides. To aid in timing,
pitch, etc., we have
Am 30.12.2015 um 13:03 schrieb Thomas Morley:
> there were some similiar projects for videos etc, can't remember, though.
> Others?
There is ly2video: https://github.com/aspiers/ly2video For examples
search for ly2video on youtube.
___
lilypond-user m
Hi Carl,
2015-12-30 8:10 GMT+01:00 Carl Peterson :
> All,
>
> I am involved in some choral
> recording projects where we are
> having the singers sing from
> projected slides. To aid in timing,
> pitch, etc., we have it set up where
> they have headphones feeding them the
> MIDI of the song being
All,
I am involved in some choral
recording projects where we are
having the singers sing from
projected slides. To aid in timing,
pitch, etc., we have it set up where
they have headphones feeding them the
MIDI of the song being recorded as
they sing. All of this is synchonored
through the
Hi Robert,
I think you're right.
Lower tie shoul look like:
\version "2.19.22"
{
\override Staff.NoteColumn.force-hshift = #0
<< { e''1_~ } \\ { bes''^~} >> \break
<< { e'' } \\ { bes''} >>
}
It seems to be a bug.
Cheers,
Pierre
2015-07-02 21:37 GMT+02:00 Robert Schmaus :
> Dear
Dear Ponderers,
I don't know if this an issue at all. But in the following example, the
lower tie after the break looks a bit low.
\version "2.19.18"
\score {
\new Staff {
1 ~ \break
q1
}
}
When you replace the bes with an b in this example, the lower tie is
much closer to the e. S
Hello all,
When a Staff is populated by \partcombine, it is often difficult to
tell/remember who is playing right after a page-break. (n.b., Unlike percussion
or vocal staves, it isn’t normal practice to change the shortInstrumentName of
a \partcombine-d Staff.)
I’ve seen several scores
Hi Simon,
> i posted almost the same question in october:
> http://lists.gnu.org/archive/html/lilypond-user/2013-10/msg00482.html (and
> http://lists.gnu.org/archive/html/lilypond-user/2013-10/msg00324.html )
Ha!
> and got no answer. maybe this time…
Fingers crossed…
Kieren.
_
hi kieren,
On Mon, Dec 16, 2013 at 10:01 PM, Kieren MacMillan <
kieren_macmil...@sympatico.ca> wrote:
> Hello all,
>
> When a Staff is populated by \partcombine, it is often difficult to
> tell/remember who is playing right after a page-break. (n.b., Unlike
> percussio
On 05/16/2013 07:14 AM, Carl Peterson wrote:
How would I go about forcing a page break after a score's header (before the
actual music)? In preparing slides for my psalter project, I want to generate
title cards before the first slide of each score. So far, everything I'be tri
How would I go about forcing a page break after a score's header (before the
actual music)? In preparing slides for my psalter project, I want to generate
title cards before the first slide of each score. So far, everything I'be tried
either generates an error or leaves the first sys
Thank you Nick. This helps.
Blessing in+,
Ming
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
On 02/12/11 13:12, MING TSANG wrote:
Hi, lily users,
Is it possible to force a page break. "\break" is for line break.
\pageBreak
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Hi, lily users,
Is it possible to force a page break. "\break" is for line break.
Blessing in+,
Ming
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
This page left intentionally blank ;)
___
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/lilypond-user
Kieren MacMillan wrote:
>
> Hi all,
>
> I'm engraving a violin part, and I want a certain page break
> (manually/explicitly forced) to skip TWO pages, i.e., break the page and
> then leave a completely blank page.
>
> 1. What's the most elegant way of do
Hi all,
I'm engraving a violin part, and I want a certain page break
(manually/explicitly forced) to skip TWO pages, i.e., break the page and then
leave a completely blank page.
1. What's the most elegant way of doing this?
2. Is there a way that allows me to have a centred text (e
2010/4/17 Graham Percival :
>
> [...]
>
> \header includes tagline and copyright, which does not go above a
> score.
Yes but in the case we use a "global" \header (i.e. outside any \score
block) for everything that is common, then only "piece" and "opus"
are changed in the \header inside the \sco
Am Samstag, 17. April 2010 01:04:38 schrieb Xavier Scheuer:
> 2010/4/17 Nick Payne :
> > No, the header blocks need to go at the end of the score blocks,
> > after the music. If the header block goes immediately after the start
> > of the score block, you get an error and the score doesn't build:
>
On Sat, Apr 17, 2010 at 01:04:38AM +0200, Xavier Scheuer wrote:
> 2010/4/17 Nick Payne :
>
> > No, the header blocks need to go at the end of the score blocks,
> > after the music.
More precisely, a score block must start with a music expression;
everything else can be ordered as desired.
> Sinc
2010/4/17 Nick Payne :
> No, the header blocks need to go at the end of the score blocks,
> after the music. If the header block goes immediately after the start
> of the score block, you get an error and the score doesn't build:
> "error: syntax error, unexpected \header".
Yes, and by the way I
On 17/04/10 00:41, Mats Bengtsson wrote:
Francisco Vila wrote:
2010/4/16 Mats Bengtsson :
See also http://lsr.dsi.unimi.it/LSR/Item?id=310
Right, but note that I was [partially] wrong here:
Francisco Vila wrote:
Yes, and in order to avoid repeated printing of the first title
(score
tit
2010/4/16 Mats Bengtsson :
> Francisco Vila wrote:
>> 2010/4/16 Mats Bengtsson :
>>> See also http://lsr.dsi.unimi.it/LSR/Item?id=310
>> Right, but note that I was [partially] wrong here:
> Francisco Vila wrote:
>> Yes, and in order to avoid repeated printing of the first title (score
>
Francisco Vila wrote:
2010/4/16 Mats Bengtsson :
See also http://lsr.dsi.unimi.it/LSR/Item?id=310
Right, but note that I was [partially] wrong here:
Francisco Vila wrote:
Yes, and in order to avoid repeated printing of the first title (score
title = book title), put y
2010/4/16 Mats Bengtsson :
> See also http://lsr.dsi.unimi.it/LSR/Item?id=310
Right, but note that I was [partially] wrong here:
>>> Francisco Vila wrote:
Yes, and in order to avoid repeated printing of the first title (score
title = book title), put your header blocks after score bloc
Graham Percival wrote:
(sorry, forgot to send to list)
It's there.
gperc...@gperciva-desktop:~/src/lilypond/Documentation/notation$ git
grep print-all-headers
input.itely:@funindex print-all-headers
input.itely: print-all-headers = ##t
spacing.itely:@item print-all-headers
spacing.itely:@funin
(sorry, forgot to send to list)
It's there.
gperc...@gperciva-desktop:~/src/lilypond/Documentation/notation$ git
grep print-all-headers
input.itely:@funindex print-all-headers
input.itely: print-all-headers = ##t
spacing.itely:@item print-all-headers
spacing.itely:@funindex print-all-headers
A
Is this is the doc? I took a quick scan (NR 3.1.2 and 3.1.3) and this
sounds like it should go in here somewhere.
I don't pretend to know about header blocks but if you think this would
be good to add I can do that, if you point me where you think it should go.
Francisco Vila wrote:
2010/4/1
2010/4/16 Nick Payne :
> I experimented with using \score only, but I couldn't get the headers to
> display (with centred title and right-justified composer) for each piece. I
> eventually found that I had to add print-all-headers = ##t to the \paper
> block to get the header for each piece to disp
On 15/04/10 21:44, Francisco Vila wrote:
2010/4/15:
I'm setting a number of short pieces, several of which will fit two to a
page. If I'm using a table of contents with \bookpart and \tocItem to get
the name of each piece into the TOC, is it possible to avoid having a page
bre
2010/4/15 :
> I'm setting a number of short pieces, several of which will fit two to a
> page. If I'm using a table of contents with \bookpart and \tocItem to get
> the name of each piece into the TOC, is it possible to avoid having a page
> break between each score so tha
I'm setting a number of short pieces, several of which will fit two
to a page. If I'm using a table of contents with bookpart and tocItem
to get the name of each piece into the TOC, is it possible to avoid
having a page break between each score so that I can have more than
one piec
Err--- that would be a chortle yes?
--hsm
On Wed, Dec 2, 2009 at 11:07 PM, James Bailey
wrote:
>
> On 03.12.2009, at 02:33, Hugh Myers wrote:
>
>> Graham,
>> …
>> I do know that you've already discovered the value of enlisting your
>> user community, having said that, I think you might find them
Graham,
I wonder if it not so much a matter of prioritization as it is a
matter of intimidation. That is to say that most people seeing the
process from the out side find it a bit scary provoking a "oh I
couldn't do that kind of feeling." I know that in my own experience
with users turned loose o
On Wed, Dec 02, 2009 at 05:33:55AM -0700, Hugh Myers wrote:
> Hadn't realized that a policy of
> collateral damage was allowed. Given your approach to testing (and
> your experience) this should work as well as more conservative
> approaches.
As Alexander wrote, it's not so much that collateral da
Hugh Myers wrote:
Thanks for the tip on
2.odd versus 2.stable as well. Hadn't realized that a policy of
collateral damage was allowed.
It isn't allowed, AFAICS, but can you prognose if you do collateral
damage every time you write a patch?
The testing is not as thorough as for stable releases.
milar bug report about chords
> not long ago, although I did not follow it with high interest. The attached
> code reproduces the problem, and is far simpler. (Though even this is not as
> minimal as I'd wish to have it.)
>
> For a workaround: You can include \
wish to have it.)
For a workaround: You can include \pageBreak commands at your choice to
get a, well, page break. Put them in, e.g. after the last line correctly
fit unto the page, and everything's fine again.
But you're right in your initial guess that you should not have to twe
Also went away after an amendment in bar 22! Not sure what is going on
here, but it is at least fun to watch. My feeling is that once every
thing is correct, some of these things will go away.
--hsm
p.s. I'll save the \paper code for worst case, thanks Marc...
On Wed, Dec 2, 2009 at 12:58 AM, Mar
Hugh Myers schrieb:
Since the project can't be done in 2.12, what do you suggest?
I inserted a paper block after the \header:
\paper {
indent = 0
between-system-space = 2\cm
between-system-padding = #5
ragged-bottom=##f
ragged-last-bottom=##f
}
You can play with the numbers, but at lea
Ah! That should be easy enough to work with--- I'll see what I can come up with.
--hsm
On Wed, Dec 2, 2009 at 12:43 AM, Marc Hohl wrote:
> Hugh Myers schrieb:
>>
>> Here is the shortest template I use:
>>
>> \version "2.13.7"
>> upper = {
>> b c d
>> }
>>
>
> Use
>
> upper = {
> \repeat unfold
Since the project can't be done in 2.12, what do you suggest?
--hsm
On Wed, Dec 2, 2009 at 12:41 AM, Marc Hohl wrote:
> Hugh Myers schrieb:
>>
>> Second point taken. I hope you realize that 2.13 has bug fixes for
>> 2.12--- yes?
>
> Yes, but 2.13.x is work in progress. There is a new layout engi
Hugh Myers schrieb:
Here is the shortest template I use:
\version "2.13.7"
upper = {
b c d
}
Use
upper = {
\repeat unfold 100 {
b c d
}
}
lower = {
< gis, d e, >2.
}
and
lower = {
\repeat unfold 100 {
< gis, d e, >.
}
}
respectively.
Marc
{
\time 3/4
<<
\new St
Hugh Myers schrieb:
Second point taken. I hope you realize that 2.13 has bug fixes for
2.12--- yes?
Yes, but 2.13.x is work in progress. There is a new layout engine
which is still under improvement, as far as I know.
So the layout may change considerably between 2.13.x and 2.13.y.
2.12.x is s
Here is the shortest template I use:
\version "2.13.7"
upper = {
b c d
}
lower = {
< gis, d e, >2.
}
{
\time 3/4
<<
\new Staff \relative c'' {
<<
\set Score.barNumberVisibility = #all-bar-numbers-visible
\bar ""
\override Score.BarNumber #'break-visibility = #'#(#
Second point taken. I hope you realize that 2.13 has bug fixes for
2.12--- yes? Without those, there is no project... I don't suppose you
took a look? Did you notice that in included tablature? If you had,
then you would perhaps have sent me a different 'Most spacing bugs can
be reproduced...' Also
On Tue, Dec 01, 2009 at 09:57:00PM -0700, Hugh Myers wrote:
> Pardon the length of the piece of code, but clearly demonstrates the
> problem where as other pieces don't (got to be a page long for
> instance...):
> \version "2.13.7"
I hope that you realize that 2.13.7 is an UNSTABLE, DEVELOPMENT
r
Pardon the length of the piece of code, but clearly demonstrates the
problem where as other pieces don't (got to be a page long for
instance...):
%
% malaguena.ly -- q&d testbed for mixed notation score and tab.
%
\version "2.13.7"
\header {
title = "Malaguena"
subtitle = "none"
composer = "
Try searching the mailist archives. This was the first one I
found:
http://lists.gnu.org/archive/html/lilypond-user/2005-07/msg00196.html
- Graham
On Thu, Apr 23, 2009 at 06:54:03PM +0100, Dominic Neumann wrote:
> Hi,
>
> is there a simple way to create a page break in a song that
Hi,
is there a simple way to create a page break in a song that is build with
lilypond-book? \pageBreak doesn´t work there.
Dominic
___
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/lilypond-user
2007/7/19, Nicolas Sceaux <[EMAIL PROTECTED]>:
> pageBreak should include a bar check by default. Anyone for a patch?
You may want to force a line or page break in the middle of a bar, using
the \bar "" trick. So we should not add a barCheck to pageBreak.
I know, but pe
"Han-Wen Nienhuys" <[EMAIL PROTECTED]> writes:
> 2007/7/18, Rune Zedeler <[EMAIL PROTECTED]>:
>> Kieran Coulter skrev:
>>
>> > This one really has me stumped! I've tried everything, and the file
>> > refuses to either a line or page br
On Thursday 19 July 2007 05:52, Han-Wen Nienhuys wrote:
> 2007/7/18, Rune Zedeler <[EMAIL PROTECTED]>:
> > Kieran Coulter skrev:
> > > This one really has me stumped! I've tried everything, and the file
> > > refuses to either a line or page break at the
2007/7/18, Rune Zedeler <[EMAIL PROTECTED]>:
Kieran Coulter skrev:
> This one really has me stumped! I've tried everything, and the file
> refuses to either a line or page break at the end of the 2nd last page
> of the included pdf.
You have an error in one of the meas
Kieran Coulter skrev:
This one really has me stumped! I've tried everything, and the file
refuses to either a line or page break at the end of the 2nd last page
of the included pdf.
You have an error in one of the measures before - so the pageBreak
command is located not at the exact
This is just a test email to see if the mailing list is rejecting my emails when I try to include attachments, like .ly and .pdf files. Does anyone know if there is an attachment limit for emails to the list?Thanks,Kieran Coulter___
lilypond-user mailing
Hi everyone,This one really has me stumped! I've tried everything, and the file refuses to either a line or page break at the end of the 2nd last page of the included pdf. I'd really appreciate any help to figure out what I've done wrong!Thanks,Kieran Coulter
PP prelude almostdone
I'm not sure that this answers the original question on how to add a
page break before a markup. According to
http://lists.gnu.org/archive/html/lilypond-devel/2006-06/msg00210.html
it should be possible to add a \pageBreak at the end of the previous score,
though.
/Mats
Jean-marc LE
XP+lily2.10
Hi, and happy new year.
Have you tried to insert a
\header {
breakbefore = ##t
}
it makes a pagebreak just before a score.
Regards.
Jmarc
___
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/l
It's easy to break pages inside a Score block, but I need to break the page
before a Markup block before the score.
Paul
___
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/lilypond-user
1 - 100 of 135 matches
Mail list logo