I am developing a 2 meter thermal duration plane for myself and was
wondering what sort of wing construction people are using for EPP 2
meter planes. I imagin I will go with a polyhedral at first to keep
things simple. I am interested in spar types, trailing edge, etc.
MIke in Freshwater CA
RCSE-
Hi Guys
AL
You can go to Irrigation dealers and pick up 20" lowhead PVC pipe and end
caps. Glue one end cap on ( Front )and use a pin to hold the back cap on.
Slide your Bag Lady Wing Bags inside.. works killer install on the top of
your truck and your set. Or install wheels & handles on the 20"
In a message dated 4/11/02 7:21:11 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
<< He won the worlds with his
Goblin.I think it was F3B >>
That's "Gobbler" and F3B was the only international RC Soaring event back
then - - well before your time, sonny.
Good Lift!
RCSE-List facilities
...GS...
Al Doig (Former RCM columnist and staunch competitor who campaigned the
Windsong/Lovesong back in the 80's)
...GS...
Bill and Bunny Kuhlman (Flying wing soaring columist/publishers)
Bill Forrey
Bob Dodgson
Bob Martin
Bob Sealy
Cecil Haga
Charlie Richardson
Dale Nutter (Member of 1st USA
Damn html.
Hello all
Thank you all for your patience with me in responding to your inquiries. I
tried to give the people that responded first extra time to decide if they
wanted the plane for sure. I have not purposely avoided anyone. I have
installed an old web cam and now have pics of the pla
If you don't think the Mantis is revolutionary, (and Tom K has won an awful
lot of contests including being the first to have his name on all the
trophies one person could at one time at Nats 2000)
It takes a lot more to both design and fly than it does to just fly.
Tom
- Original Message --
On Thu, 11 Apr 2002 [EMAIL PROTECTED] wrote:
>
> Lee Renaud
> Mark Smith
> Dave Thornburg
> Dan Pruss
> Joe Wurts
> Bob Dodgson
> Lee Gray
> Michael Selig
> Tom Williams
> Bill Forrey
> GS... (do this to start your contribution to the list, your inits an some
> dots)
> Frank Weston
> Sal DeF
Would someone PLEASE show me how to unsubscribe??? I've
sent about 15 variations of what I thought might work and I always get a
nasty-gram back that sez WRONG AGAIN!!! Thanks
-Bill-
The definition of the "Hall of Fame" requirements will have to be defined
before any real arguing could reasonably be done.
So, using my OWN DEFINITION of the requirements I'll throw caution to the
wind and dive in now. I think you need to be:
- A superlative pilot or,
- Contribute something
At 10:45 AM 4/11/2002, [EMAIL PROTECTED] wrote:
(I'm itchin for an argument,
anyone want to challenge my nominations???!!)
As there is no R/C soaring hall of fame and these lists are just peoples
opinions, what is there to argue about?
Lee Renaud
Mark Smith
Dave Thornburg
Dan Pruss
Joe Wurts
Bob Dodgson
Lee Gray
Michael Selig
Tom Williams
Bill Forrey
GS... (do this to start your contribution to the list, your inits an some dots)
Frank Weston
Sal DeFrancesco
Mike Popescu
Cecil Haga
Jerry and Judy Slates
Jim Gray
Ernie Barter
I would add Tom Keisling
You've got to admit the Mantis has made a big
impact on soaring (as well as the fact he is a great flier and all around nice
guy)
Tom
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, April 11, 2002 11:45
AM
Note that the main mote of my response was that the TRANSMITTER determined
channel assignments, and the refer4encxes were for example. This is
enough of this. We're taking too much bandwidth discussing symantics.
.bc([EMAIL PROTECTED]
http://www.widomaker.com/~conk
Williamsb
SporTube Shortest Length:
I measured the double snowboard SporTube at a length of 43.5 inches
when telescoped together as short as possible.
Incidentally, I recently purchased a double snowboard SporTube for $59.93
at the Recreational Equipment Incorporated flagship store in Seattle
on April 4.
Bill it does contradict something you said!! The second part of your
statement said:
(Thus, when using a Hitec rec with a JR trans, channel 1 is throttle, NOT
Aileron as
in Hitec systems. I believe Kraft used channel 1 for elevator, and so on.)
This is statement is true ONLY for the above T
Hello,
I have had a couple Zagi's (still do) and I have not
encountered this particular problem, but you might try
this site, it has LOTS of info - the guy is a Zagi
FANATIC!
http://www.yourzagi.com
Hope you can find an answer!
B-man
http://www.hobiehawkinfo.com (zagi tips too!)
_
The cases at Home Depot etc... (at least the ones I looked at) are not really
aluminum. They are a cheap masonite type construction
with a simulated aluminum covering. I'll bet it is really plastic. I guess a little
acetone and we would know for sure!!
Darwin N. Barrie
Phoenix AZ
Monkey King w
Does anyone know where to get more of the servo attachment screws
that come with Volz servos? (I lost mine)
Rense Lange
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
At 08:02 AM 4/10/2002 -0500, Steve Meyer wrote:
>These Aluminum tool cases have become more and more popular. I even saw
>them at a Home Depot but can't recall the price.
>
>http://www.milestek.com/hdalumspecial.htm
>
>18" x 14" x 6"
>$49.95
>
>I've procrastinated long enough, probably should ge
On Wed, 2002-04-10 at 08:49, Steve Meyer wrote:
> Does your question read?
>
> Are there any scoring applications that score man on man with the ability
> to create a matrix either "seeded" or random (with fewest pilot matches as
> possible)?
This might be best approached using a constraint sa
Spring cleaning sale:
Hitec/RCD 555 5 channel dual conversion FM receiver for old
Airtronics radios (1 1/2 years old) - $35
Ohmark Elevon Mixer Mk1.0 for old Airtronics radios (1 1/2 years
old) - $20
Airtronics 6 channel 92985 PCM dual conversion receiver with PCM
switch harness (channel 26
21 matches
Mail list logo
