Re: [BlindHandyMan] Stripping and a Finishing Touch
You are correct TOm that it would decrease the value, but to be perfectly honest, it isn't worth much now any way. When I purchased it, I paid $900 or so for it. If I were to sell it today, it would fetch a price of around $500 to $600 and with the damage fixed and only if it was so fixed you wouldn't notice it, that may not affect the price to much. Point is I have nothing to loose since I have no plans to ever sell it. At this point a new one would actually cost me $1,500 since Fender raised their price a good deal, but doesn't seem to affect the resale value much. You do however make a good point about the impact on the resale. Of course I probably wouldn't fix it myself. I'd have it done properly, but I would on the other hand strip it down myself and do something different. On Oct 6, 2009, at 8:06 PM, Tom Hodges wrote: I would take it to the professionals to fix as any home repair will decrease the value of it. From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Scott Howell Sent: Tuesday, October 06, 2009 1:17 PM To: blindhandyman@yahoogroups.com Subject: [BlindHandyMan] Stripping and a Finishing Touch Well I asked my wife about this, but nearly got slapped, so thought I should ask you guys and oh yeah gals as well. Okay, just kidding, but grabbed your attention didn't I? So, I have a Fender Jazz bass that for some inexplicable reason developed a crack in the coating which is some type of urithane (spelled incorrectly of course) and I did not realize this until something snagged on my shirt and pulled a good piece of the material off the edge. So, now I'm faced with two options. One is take it to the shop to have this problem repaired since they have the experience, tools, and materials to do the job right. I'm not honestly sure what the stuff is that they put on there at the factory. The other option is to finish what has already started and remove all that stuff. Then i'd have an instrument I could do a hand-rubbed finish on, restain, or simply apply a much thinner coat of urithane or some protective material. The thought process is that an unfinished instrument will have a slightly or perhaps a more noticeable difference in tone. The whole point of this message is then to ask what would be the best way to remove the remaining material if I chose to do so. Would I start with a really heavy grit paper and then begin to work to a finer paper? Assuming I do all of this, and I don't damage the stain already on the instrument, what type of material would be best for I believe it is Swamp Ash and might be something else in there like Alder, but in any case any thoughts would be appreciated. The idea of a natural finish is appealing and at this point it has a tobacco sunburst finish on it, so time to decide. I do like the sunburst finish, but the urithane can hide the true sound of the wood perhaps. Well hey, any thoughts welcome, I'm not do to hit the shop Thursday in any event. tnx, [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] tough braillable materials?
Aloha Bill, I have enough to send some to both of you. What is your mailing address? And, since the material has braille on it, and I assume that we are both blind, may I send it Free Matter? Betsy At 03:30 PM 10/7/2009, you wrote: Dear Betsy, If Matt does not want these, I would love to have them. Bill Benson e-mail: mailto:billben%40sbcglobal.netbill...@sbcglobal.net - Original Message - From: Betsy Whitney To: blindhandyman-yahoogroups.com Sent: Wednesday, October 07, 2009 9:28 AM Subject: Re: [BlindHandyMan] tough braillable materials? Aloha Matt, They still make braillables which are those sticky backed sheets, but when the backing is removed, they aren't as durable as the thin thermoform paper. However, I do have some heavy clear plastic material that I use to make covers for the documents that my company produces. I buy them from a company called Southwest Plastics, but if all you want is 25 or so of them, I have some that have 1 line of braille on them that were errors. They measure 8-1/2 by 11, or 9 by 11. They are all 19 hole punched along one long side. I use a paper cutter to make 3 by 5 and 4 by 6 cards for addresses and the like that I really want to keep, but I have more than I need. I use a good-old-fashioned braille writer to braille them. Betsy At 04:14 AM 10/7/2009, you wrote: What is out there which we can stick in an old perkin's brailler and achieve a tough, durable copy of something? I was thinking of brailling out measurements and stuff for things I make and storing them out in my shop to refer too? Thermoform paper rips too easy for my liking. Do they still have the old sticky plastic paper, which used to come in sheets with plastic backing? Where can I get something good which will last? Thanks, Matt [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Cleaning artificial plants
Hi Nancy, For small to medium sized plants, I use about a cup, but for the bigger items that have to go in a leaf or large trash bag, I use two cups. You won't be waisting it because you can save it for the next time. Betsy At 01:16 PM 10/7/2009, you wrote: How much salt would you add? Thanks, Nancy - Original Message - From: Jennifer Jackson To: mailto:blindhandyman%40yahoogroups.comblindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 3:25 PM Subject: Re: [BlindHandyMan] Cleaning artificial plants Put them in a plastic bag with some salt and then shake, shake, shake. Jennifer - Original Message - From: Nancy Hill To: mailto:blindhandyman%40yahoogroups.comblindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 8:49 AM Subject: [BlindHandyMan] Cleaning artificial plants Hi List, I have several 'silk' plants ranging from a tree to ferns to ivy. They are all stuck into something that winds up in some sort of container...usually a woven basket. It is time that I cleaned these beauties and need ideas of ways to clean them to get dust layers off them Suggestions would be greatly appreciated. Thanks, Nancy [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] drum lessons
I would bet it's the same that BL is importing from China. On Wed, 7 Oct 2009, Lenny McHugh wrote: Office Max $9.00 - Original Message - From: Tom Hodges tomhod...@fuse.net To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 10:08 AM Subject: RE: [BlindHandyMan] drum lessons Where did you find those magnifier sheets? Thank you, Tom Hodges From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Lenny McHugh Sent: Tuesday, October 06, 2009 7:09 PM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] drum lessons I picked up the full sheet magnifier. Here my daughter had purchased a cheap one that did not help. This one was considerably more expensive. I can not locate the yellow sheets. - Original Message - From: Betsy Whitney braill...@hawaii.rr.com mailto:brailleit%40hawaii.rr.com To: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com Sent: Tuesday, October 06, 2009 10:48 AM Subject: Re: [BlindHandyMan] drum lessons They have full page magnifying sheets, and some people use a thin plastic sheet that is yellow in color. I think my friend bought her full page magnifier at some place like a bookstore. If not there, try an art store. You probably can find them at blindness-related places, but they are more expensive at those stores. Betsy At 04:36 AM 10/6/2009, you wrote: For you guys that play drums. My grandson age 12 has been taking drum lessons both private and in school. He is at the point where he is having difficulty reading the music. Is there anything that can be placed on the book to make it easy for him to read. I vaguely remember a plastic sheet that you placed on the printed page and it did magnify it. I could build a stand to hold it if needed. I don't know if they still make the item or what it was called. --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com mailto:blindhandyman-owner%40yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_ pagePAGE_id=33MMN_position=47:29 PAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo mailto:blindhandyman-help%40yahoogroups.comYahoo ! Groups Links [Non-text portions of this message have been removed] Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com mailto:blindhandyman-owner%40yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_ pagePAGE_id=33MMN_position=47:29 PAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo mailto:blindhandyman-help%40yahoogroups.comYahoo ! Groups Links __ NOD32 4484 (20091006) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com [Non-text portions of this message have been removed] Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com
Re: [BlindHandyMan] tough braillable materials?
No problem, I'll send them out today. Betsy At 12:54 AM 10/8/2009, you wrote: Dear Betsy, Thanks very much! My address is: Bill Benson 612 Francis Place St. Louis, MO 63105 Free matter is great. Thanks again. Bill - Original Message - From: Betsy Whitney To: mailto:blindhandyman%40yahoogroups.comblindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 3:55 AM Subject: Re: [BlindHandyMan] tough braillable materials? Aloha Bill, I have enough to send some to both of you. What is your mailing address? And, since the material has braille on it, and I assume that we are both blind, may I send it Free Matter? Betsy At 03:30 PM 10/7/2009, you wrote: Dear Betsy, If Matt does not want these, I would love to have them. Bill Benson e-mail: mailto:billben%40sbcglobal.netmailto:billben%40sbcglobal.netbill...@sbcglobal.net - Original Message - From: Betsy Whitney To: blindhandyman-yahoogroups.com Sent: Wednesday, October 07, 2009 9:28 AM Subject: Re: [BlindHandyMan] tough braillable materials? Aloha Matt, They still make braillables which are those sticky backed sheets, but when the backing is removed, they aren't as durable as the thin thermoform paper. However, I do have some heavy clear plastic material that I use to make covers for the documents that my company produces. I buy them from a company called Southwest Plastics, but if all you want is 25 or so of them, I have some that have 1 line of braille on them that were errors. They measure 8-1/2 by 11, or 9 by 11. They are all 19 hole punched along one long side. I use a paper cutter to make 3 by 5 and 4 by 6 cards for addresses and the like that I really want to keep, but I have more than I need. I use a good-old-fashioned braille writer to braille them. Betsy At 04:14 AM 10/7/2009, you wrote: What is out there which we can stick in an old perkin's brailler and achieve a tough, durable copy of something? I was thinking of brailling out measurements and stuff for things I make and storing them out in my shop to refer too? Thermoform paper rips too easy for my liking. Do they still have the old sticky plastic paper, which used to come in sheets with plastic backing? Where can I get something good which will last? Thanks, Matt [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Fridge drip-pan
Ah, well what's happening with this, is that evidently some little drops are freezing up on the tray, and over time, it builds up and evidently involves the drain. It was frozen down into the drain, because I had to first thaw it all out with hair-dryer, and then run something down in the drain all the way to make sure that it was clear between freezer and fridge. The best thing would probably be to unplug and totally defrost, but we don't have an extra to move all our stuff too. We have a small beer fridge, and a deep freez, but both are full. I'm still watching it, and clearing the little drops as I go, and I think my wife is fed-up with my keeping the freezer empty for this reason, so I'm about to have to bit it, and put things back and just take it out every few days to watch the progress. - Original Message - From: Max Robinson To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 5:34 PM Subject: Re: [BlindHandyMan] Fridge drip-pan No. This leak was in the refrigerator section right at the top. The drain tube passed through there and out through the back wall to the outside. This area was not ever supposed to be below freezing but the cold air leak was freezing up the drain line. Regards. Max. K 4 O D S. Email: m...@maxsmusicplace.com Transistor site http://www.funwithtransistors.net Vacuum tube site: http://www.funwithtubes.net Music site: http://www.maxsmusicplace.com To subscribe to the fun with tubes group send an email to, funwithtubes-subscr...@yahoogroups.com - Original Message - From: Matt mattmull...@suddenlink.net To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 5:47 AM Subject: Re: [BlindHandyMan] Fridge drip-pan Hmmm? You're talking about in the freezer right? I can tell you that there are two holes, maybe just one between the fridge and freezer. They share cold air up and down I guess. When the water does end up acumulating on the top shelf of my fridge, it freezes into a sheet of ice at the back. Glass shelves ya understand. The dryer fan by the drip-pan does work by the way, someone else had asked that. I found it when I took off the back panel to get the drip pan propperly seated. - Original Message - From: Max Robinson To: blindhandyman@yahoogroups.com Sent: Tuesday, October 06, 2009 11:05 PM Subject: Re: [BlindHandyMan] Fridge drip-pan Here's another possible solution from my experience. In an earlier fridge we owned some of the calking came out of the air circulating system. This allowed cold air right from the evaporator to blow on the drain hose. With each defrost cycle a little more ice would form in the hose and it accumulated faster than it melted during a defrost cycle. Eventually it would plug up. The solution was to apply a little duck tape over the crack that the cold air was coming out of. Check around for air leaks when the fan is running. Regards. Max. K 4 O D S. Email: m...@maxsmusicplace.com Transistor site http://www.funwithtransistors.net Vacuum tube site: http://www.funwithtubes.net Music site: http://www.maxsmusicplace.com To subscribe to the fun with tubes group send an email to, funwithtubes-subscr...@yahoogroups.com - Original Message - From: Matt mattmull...@suddenlink.net To: blindhandyman@yahoogroups.com Sent: Tuesday, October 06, 2009 8:04 AM Subject: Re: [BlindHandyMan] Fridge drip-pan I don't think that is a problem just now. I poured warm water down the drain once I got it unfrozen and the water which I found in thep an afterwards was still a little warm, so it seems to be draining ok. Just freezes up, evidently up between the drain in the freezer and the fridge. - Original Message - From: Betsy Whitney To: blindhandyman@yahoogroups.com Sent: Tuesday, October 06, 2009 7:15 AM Subject: Re: [BlindHandyMan] Fridge drip-pan Aloha Matt, Is it possible that there is some little kernel of something in the drain line to the drip pan? Once something got into mine and I had to clean the draining line to stop the problem so that the water could travel properly. Betsy At 01:11 AM 10/6/2009, you wrote: Yeah, we run into trouble when the kids spill drinks in the fridge, and so on, but the problem which lead me to check it was this freezing up in the back of my freezer where the drain is. Had to chip ice away and heat and thaw the drain with a hair-drier. My handy-man friend came over and showed me this trick originally, because we were having lots of water in the inside of our fridge part, under the freezer. He told me it might come back and here a few weeks later, it has. Will just be keeping an eye on it. Matt - Original Message -
Re: [BlindHandyMan] Cleaning artificial plants
on second clear minded thinking Nancy I'd agree with Dale about silk not liking water or they might ravel or shrink . back to my corner and crack ne open. Lee On Wed, Oct 07, 2009 at 07:21:03PM -0400, Nancy Hill wrote: Lee, I might just wait until summer...or the last warm day of the year. If I had tried the hose light spray, it wouldn't have done any good because the plants would have been blown away by the wind. lol Thanks, Nancy - Original Message - From: Lee A. Stone To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 12:36 PM Subject: Re: [BlindHandyMan] Cleaning artificial plants let them have a shower. what i am suggesting is if you have a hand held unit in you shower then turn it on and spray them good all over and tip to thes ide and like a small child let them stand ona towel until they are at least almost dry. if it was summer i would suggest taking them outside ith a fine spray of the garden hose. Lee On Wed, Oct 07, 2009 at 09:49:25AM -0400, Nancy Hill wrote: Hi List, I have several 'silk' plants ranging from a tree to ferns to ivy. They are all stuck into something that winds up in some sort of container...usually a woven basket. It is time that I cleaned these beauties and need ideas of ways to clean them to get dust layers off them Suggestions would be greatly appreciated. Thanks, Nancy -- Far back in the mists of ancient time, in the great and glorious days of the former Galactic Empire, life was wild, rich and largely tax free. Mighty starships plied their way between exotic suns, seeking adventure and reward among the furthest reaches of Galactic space. In those days, spirits were brave, the stakes were high, men were real men, women were real women and small furry creatures from Alpha Centauri were real small furry creatures from Alpha Centauri. And all dared to brave unknown terrors, to do mighty deeds, to boldly split infinitives that no man had split before -- and thus was the Empire forged. -- Douglas Adams, The Hitchhiker's Guide to the Galaxy . [Non-text portions of this message have been removed] -- Far back in the mists of ancient time, in the great and glorious days of the former Galactic Empire, life was wild, rich and largely tax free. Mighty starships plied their way between exotic suns, seeking adventure and reward among the furthest reaches of Galactic space. In those days, spirits were brave, the stakes were high, men were real men, women were real women and small furry creatures from Alpha Centauri were real small furry creatures from Alpha Centauri. And all dared to brave unknown terrors, to do mighty deeds, to boldly split infinitives that no man had split before -- and thus was the Empire forged. -- Douglas Adams, The Hitchhiker's Guide to the Galaxy .
Re: [BlindHandyMan] Cleaning artificial plants
and that comes from a nurse who, well she has fiexed up plants before. and the salt might tend to keep any spiderweb activity to a zero count. Lee On Wed, Oct 07, 2009 at 02:25:21PM -0500, Jennifer Jackson wrote: Put them in a plastic bag with some salt and then shake, shake, shake. Jennifer - Original Message - From: Nancy Hill To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 8:49 AM Subject: [BlindHandyMan] Cleaning artificial plants Hi List, I have several 'silk' plants ranging from a tree to ferns to ivy. They are all stuck into something that winds up in some sort of container...usually a woven basket. It is time that I cleaned these beauties and need ideas of ways to clean them to get dust layers off them Suggestions would be greatly appreciated. Thanks, Nancy [Non-text portions of this message have been removed] -- Far back in the mists of ancient time, in the great and glorious days of the former Galactic Empire, life was wild, rich and largely tax free. Mighty starships plied their way between exotic suns, seeking adventure and reward among the furthest reaches of Galactic space. In those days, spirits were brave, the stakes were high, men were real men, women were real women and small furry creatures from Alpha Centauri were real small furry creatures from Alpha Centauri. And all dared to brave unknown terrors, to do mighty deeds, to boldly split infinitives that no man had split before -- and thus was the Empire forged. -- Douglas Adams, The Hitchhiker's Guide to the Galaxy .
Re: [BlindHandyMan] plant stand
that should get you onto good mornng America resubmit your photo's to other places . Lee On Wed, Oct 07, 2009 at 08:26:40PM -0400, Lenny McHugh wrote: Well, I must assume that I did not win. Every month the saw mill from which I purchase my wood has a photo project contest. I submitted a photograph of the plant stand that I made for Karen, for September. I thought it is the nicest piece that I made. For this table I wrote a descriptive poem for Karen. The poem really describes the table as well as my feelings. It is as follows: To Karen with Love, I am a closet romantic, meaning that I often have warm thoughts that I just can?t seem to be able to say. When I was designing and building this special table for you I had these thoughts: The strong white oak legs remind me how supportive you have always been to me. The gentle taper that I made on the legs reminds me of how gentle and kind you are. The rich red cherry table top reminds me of all of your overflowing Love, color red is the color of the heart. The classical three bead decorative design in the aprons reminds me of how classy you are. The decorative Forget-Me-Not flower tile in the table top makes me think of all of the wonderful times that we had. The warm color purple of the flowers is most appropriate since it is a blend of red and blue, or hot and cold, since you indeed are a very warm person. Purple is also the color of royalty again most fitting. --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo! Groups Links -- Far back in the mists of ancient time, in the great and glorious days of the former Galactic Empire, life was wild, rich and largely tax free. Mighty starships plied their way between exotic suns, seeking adventure and reward among the furthest reaches of Galactic space. In those days, spirits were brave, the stakes were high, men were real men, women were real women and small furry creatures from Alpha Centauri were real small furry creatures from Alpha Centauri. And all dared to brave unknown terrors, to do mighty deeds, to boldly split infinitives that no man had split before -- and thus was the Empire forged. -- Douglas Adams, The Hitchhiker's Guide to the Galaxy .
RE: [BlindHandyMan] electric motor question
Hi Tom, Thanks for the information. The occasional trip to the basement to reset a breaker isn't a problem if that's the only thing I need to worry about. As far as extension cords, I never use them unless absolutely necessary. For power tools and units as large as this treadmill, I've got some cords that are 12 gauge but I prefer not to use them. Take care, Ed Przybylek From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Tom Fowle Sent: Wednesday, October 07, 2009 3:22 PM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question Edward, 3.5 HP times 746 watts per HP over 120 volts is over 21 amps. so they're probably lying about the hp, but you could sure pop a breaker if they aren't. Absolutely no extension cords on this puppy. Tom On Wed, Oct 07, 2009 at 03:11:02PM -0400, Edward Przybylek wrote: Hi all, I've been following this thread with much interest because we just purchased a new treadmill. The unit has a 3.5 horsepower motor, is capable of a 12% incline and has a top speed of 10 MPH. This discussion thread has concerned itself with motors 2.5 HP and lower and whether there needs to be a concern about breaker ratings. Given that this unit has a motor with 3.5 HP, are there concerns I should be addressing? We use the treadmill for power walking and I'm quite sure it will never see speeds much over 5 or 6 MPH. We've had the incline up to 8 percent and I'm sure we'll have it up to the 12% maximum before too long. We haven't popped a breaker yet but I just want to be sure that there isn't something I should be doing just as a precaution. Thanks. Take care, Ed Przybylek From: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com [mailto:blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com ] On Behalf Of Tom Fowle Sent: Wednesday, October 07, 2009 1:43 PM To: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question David, One Horsepower is generally considered to require about 750 watts. so 2.25 HP will need a solid 1700 watts. This is probably a peak rating, but none th less it must be on a 20 amp circuit that isn't used much. If you have a coule 200 watt outside lights on at the same time, it will get very close to the max rating of a 20 amp circuit. tom [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
RE: [BlindHandyMan] electric motor question
Hi Dale, Pretty much, what you said is what I thought but I figured it wouldn't hurt to ask. How would I verify the horsepower of the motor? Both the manual and the label on the side of the motor claim it's 3.5 HP. My knowledge of electricity and motors is almost 0. Any information is greatly appreciated. Take care, Ed Przybylek From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Dale Leavens Sent: Wednesday, October 07, 2009 6:02 PM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question Well, it isn't the end of the world to trip a breaker so I wouldn't worry about it too much. I can however pretty well guarantee that motor isn't anything near 3.5 hp. regardless what they rate it at or tell you. Why would it have to be anyway, one horsepower is 550 foot pounds per second. Unless you are running an elephant or you have quite spectacular foot pounds you won't be taxing a motor anything like that hard. - Original Message - From: Edward Przybylek To: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com Sent: Wednesday, October 07, 2009 3:11 PM Subject: RE: [BlindHandyMan] electric motor question Hi all, I've been following this thread with much interest because we just purchased a new treadmill. The unit has a 3.5 horsepower motor, is capable of a 12% incline and has a top speed of 10 MPH. This discussion thread has concerned itself with motors 2.5 HP and lower and whether there needs to be a concern about breaker ratings. Given that this unit has a motor with 3.5 HP, are there concerns I should be addressing? We use the treadmill for power walking and I'm quite sure it will never see speeds much over 5 or 6 MPH. We've had the incline up to 8 percent and I'm sure we'll have it up to the 12% maximum before too long. We haven't popped a breaker yet but I just want to be sure that there isn't something I should be doing just as a precaution. Thanks. Take care, Ed Przybylek From: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com [mailto:blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com ] On Behalf Of Tom Fowle Sent: Wednesday, October 07, 2009 1:43 PM To: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question David, One Horsepower is generally considered to require about 750 watts. so 2.25 HP will need a solid 1700 watts. This is probably a peak rating, but none th less it must be on a 20 amp circuit that isn't used much. If you have a coule 200 watt outside lights on at the same time, it will get very close to the max rating of a 20 amp circuit. tom [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Cleaning artificial plants
Betsy, do you have to remove the plants from their baskets? I would think I would totally mess up their look if I tried that. Thanks, Nancy - Original Message - From: Betsy Whitney To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 4:49 AM Subject: Re: [BlindHandyMan] Cleaning artificial plants Hi Nancy, For small to medium sized plants, I use about a cup, but for the bigger items that have to go in a leaf or large trash bag, I use two cups. You won't be waisting it because you can save it for the next time. Betsy At 01:16 PM 10/7/2009, you wrote: How much salt would you add? Thanks, Nancy - Original Message - From: Jennifer Jackson To: mailto:blindhandyman%40yahoogroups.comblindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 3:25 PM Subject: Re: [BlindHandyMan] Cleaning artificial plants Put them in a plastic bag with some salt and then shake, shake, shake. Jennifer - Original Message - From: Nancy Hill To: mailto:blindhandyman%40yahoogroups.comblindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 8:49 AM Subject: [BlindHandyMan] Cleaning artificial plants Hi List, I have several 'silk' plants ranging from a tree to ferns to ivy. They are all stuck into something that winds up in some sort of container...usually a woven basket. It is time that I cleaned these beauties and need ideas of ways to clean them to get dust layers off them Suggestions would be greatly appreciated. Thanks, Nancy [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Compound curve gauge.
On Wed, 7 Oct 2009 22:07:29 -0400you write: I just received this device for setting or copying compound curves. It is a strip of metal about inch and a quarter high and five and a half feet long. At intervals there are brackets attached to it with slots and tightening knobs which allow you to bend the s trip into curved shapes then lock them with the knobs. Dale: Thanks for the info. I'm going to be making a headboard soon. The top will have a slight arch or curve with cut-outs at each end. This device might do the trick. I'm thinking a good solution would be to use this device to create a pattern out of hardboard using a flushtrim bit. Then, by using a pattern bit, one could make the exact curve desired. Thanks again. Terry
Re: [BlindHandyMan] Stereo Systems?
Denon has a Nakamichi type sound. Quite respectable. They make some of the most respected workhorse DVD players out there. I don't know the sound of either speaker, but have heard of EPI. On Wed, 7 Oct 2009, Lenny McHugh wrote: I ended up with Esone prior to that I was an EPI fan. My receiver is a Denon.Don't ask me models, I am lucky that I can still remember how to turn it on. - Original Message - From: Spiro sp...@iamspiro.com To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 12:15 AM Subject: Re: [BlindHandyMan] Stereo Systems? what brand did you get Lenny? I've had Yahama 500's, BW 804's, and the single driver version of the MBL speakers. I'd love to get BW 800 or 801, VonSchwiekert SR5, or The big MBl's. What amp made the Krutchfield's sing the way you like? Nothing I've heard does piano or accoustic quartets like an Audio Research with Joseph's. Great topic. On Mon, 5 Oct 2009, Lenny McHugh wrote: Dear Claudia, Wow! that is a very difficult question to answer. I have not done sound work in many years although I still follow some basic rules I had set when I installed systems. My first question is what type of music do you like? Many people equate the power output to volume. If you just want a rock system most 25 to 35 watt systems are ok. If you like classical I would never recommend anything less than 75 watts. The power in this case is not for volume but for response. With a low powered system you may not hear the triangle in a piece. Another rule that I used is that your speakers should be at a minimum of 50% of the total cost. If there is a good stereo shop near you go and listen to the same piece being played on different speaker systems. Quite a few years ago I wanted new speakers. I took Karen to let her listen. There was one set that my brother had but for me had too much presence, a great rock speaker. anyway I had the salesman play something using those speakers and Karen liked them. I then had him play the same piece on the speakers that I wanted and again she liked them. I had him go back to the first pair and she immediately stated that she did not want them in her house. I since upgraded and could not pass up the offer. Crutchfield had them on a end of model clearance. They were regular $1,200 on sale for $600. They had free shipping and I could use them in my home for 30 days. At that time if I did not like them they would pay the return shipping. This was an offer I could not pass I have the speakers for about 6 years now. --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. - Original Message - From: Claudia cdelreal1...@sbcglobal.net To: blindhandyman@yahoogroups.com Sent: Monday, October 05, 2009 3:16 PM Subject: [BlindHandyMan] Stereo Systems? Hi, How do I determine how many watts I want or need, in the purchase of a new stereo system? Is there somewhere on the Internet I can go to determine the difference in watts? Thanks. Claudia MSN: cdelreal1...@sbcglobal.net Skype: claudiadr2009 Join either of my groups; the first is for visually-impaired women, while the other is for people wishing to discuss homemaking issues. our-safe-haven-subscr...@googlegroups.com makinghouseworkeasier-subscr...@googlegroups.com Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo! Groups Links __ NOD32 4482 (20091005) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or
Re: [BlindHandyMan] drum lessons
Well, if that doesn't do it; and if he isn't too agressive with his body motions... there is a BL 4X5 inch 2x hands free mag that is a great deal stronger and clearer than the full page. On Wed, 7 Oct 2009, Lenny McHugh wrote: They are at the best that can do now. He like me has RP he already lost most of his night vision. - Original Message - From: Spiro sp...@iamspiro.com To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 12:29 AM Subject: Re: [BlindHandyMan] drum lessons How is he for glasses? A full page mag, is good for 2x gross, and .5x detailed. If they are flexible, like in most book stores, there will be waving introduced at times. The BL is the clearest and non-flexible. How does he see the TV or the black board?/text book? The on the nose answer is often gonna allow you high mag strength. antique, gun shop, coin dealers may have a big glass lens on a stand at about 8X but it's heavy and thick. But it will do the job. On Tue, 6 Oct 2009, Lenny McHugh wrote: Thanks, what does the yellow do? - Original Message - From: Betsy Whitney braill...@hawaii.rr.com To: blindhandyman@yahoogroups.com Sent: Tuesday, October 06, 2009 10:48 AM Subject: Re: [BlindHandyMan] drum lessons They have full page magnifying sheets, and some people use a thin plastic sheet that is yellow in color. I think my friend bought her full page magnifier at some place like a bookstore. If not there, try an art store. You probably can find them at blindness-related places, but they are more expensive at those stores. Betsy At 04:36 AM 10/6/2009, you wrote: For you guys that play drums. My grandson age 12 has been taking drum lessons both private and in school. He is at the point where he is having difficulty reading the music. Is there anything that can be placed on the book to make it easy for him to read. I vaguely remember a plastic sheet that you placed on the printed page and it did magnify it. I could build a stand to hold it if needed. I don't know if they still make the item or what it was called. --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo! Groups Links [Non-text portions of this message have been removed] Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo! Groups Links __ NOD32 4484 (20091006) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is.
RE: [BlindHandyMan] electric motor question
I would almost guess that the peak hp of that motor is 3.5, but the continuous hp is around 1.5- 2.0. Which basically means, that if all the right conditions existed, that motor could put out 3.5 hp. Which, connected to a 20 amp 120 volt outlet won't happen. Convert it to 240 volt, and then it won't be a problem. It is a marketing ploy that a lot of treadmill manufactures use, they give you the peak hp of the motor. i have seen some treadmill motors now use PWM (pulse Width modulation), which means nothing to me, so I don't know how this effects HP of an electric motor. Or some electric motors actually run on D/C, and not A/C, again, I have no clue how that will effect HP of the motor, I know it makes the motor more energy efficient. To make things even more confusing, some treadmill manufactures rate their motor HP at the final drive, after all gear ratios and such. It is hard to compare them apples to apples. Michael _ From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Edward Przybylek Sent: Thursday, October 08, 2009 7:48 AM To: blindhandyman@yahoogroups.com Subject: RE: [BlindHandyMan] electric motor question Hi Dale, Pretty much, what you said is what I thought but I figured it wouldn't hurt to ask. How would I verify the horsepower of the motor? Both the manual and the label on the side of the motor claim it's 3.5 HP. My knowledge of electricity and motors is almost 0. Any information is greatly appreciated. Take care, Ed Przybylek From: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com [mailto:blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com] On Behalf Of Dale Leavens Sent: Wednesday, October 07, 2009 6:02 PM To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question Well, it isn't the end of the world to trip a breaker so I wouldn't worry about it too much. I can however pretty well guarantee that motor isn't anything near 3.5 hp. regardless what they rate it at or tell you. Why would it have to be anyway, one horsepower is 550 foot pounds per second. Unless you are running an elephant or you have quite spectacular foot pounds you won't be taxing a motor anything like that hard. - Original Message - From: Edward Przybylek To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com mailto:blindhandyman%40yahoogroups.com Sent: Wednesday, October 07, 2009 3:11 PM Subject: RE: [BlindHandyMan] electric motor question Hi all, I've been following this thread with much interest because we just purchased a new treadmill. The unit has a 3.5 horsepower motor, is capable of a 12% incline and has a top speed of 10 MPH. This discussion thread has concerned itself with motors 2.5 HP and lower and whether there needs to be a concern about breaker ratings. Given that this unit has a motor with 3.5 HP, are there concerns I should be addressing? We use the treadmill for power walking and I'm quite sure it will never see speeds much over 5 or 6 MPH. We've had the incline up to 8 percent and I'm sure we'll have it up to the 12% maximum before too long. We haven't popped a breaker yet but I just want to be sure that there isn't something I should be doing just as a precaution. Thanks. Take care, Ed Przybylek From: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com mailto:blindhandyman%40yahoogroups.com [mailto:blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com mailto:blindhandyman%40yahoogroups.com ] On Behalf Of Tom Fowle Sent: Wednesday, October 07, 2009 1:43 PM To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com mailto:blindhandyman%40yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question David, One Horsepower is generally considered to require about 750 watts. so 2.25 HP will need a solid 1700 watts. This is probably a peak rating, but none th less it must be on a 20 amp circuit that isn't used much. If you have a coule 200 watt outside lights on at the same time, it will get very close to the max rating of a 20 amp circuit. tom [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] finding ants in your house/ riddex??
hahaha Max. Spiders do inspire respect. But no other bugs, so I guess the protective service is paid well. On Tue, 6 Oct 2009, Dan Rossi wrote: Spiro, Those aren't dead spiders you are finding. Those are the molted shells of spiders. So, you obviously have very well fed spiders since they must be growing a lot and molting frequently. Are you scared now? *GRIN* I would be. -- Blue skies. Dan Rossi Carnegie Mellon University. E-Mail: d...@andrew.cmu.edu Tel: (412) 268-9081
Re: [BlindHandyMan] drum lessons
those are called Frezelle (sorry if the spelling is wrong) lenses. On Tue, 6 Oct 2009, Betsy Whitney wrote: Lenny, My former secretary had a magnifier that felt like thick plastic. It was flexible, and was smooth on one side and a bit textured on the other. The textured side felt similar to the vinyl floor that we have that looks like granite. Betsy At 04:58 AM 10/6/2009, you wrote: Thanks, what does the yellow do? - Original Message - From: Betsy Whitney mailto:brailleit%40hawaii.rr.combraill...@hawaii.rr.com To: mailto:blindhandyman%40yahoogroups.comblindhandyman@yahoogroups.com Sent: Tuesday, October 06, 2009 10:48 AM Subject: Re: [BlindHandyMan] drum lessons They have full page magnifying sheets, and some people use a thin plastic sheet that is yellow in color. I think my friend bought her full page magnifier at some place like a bookstore. If not there, try an art store. You probably can find them at blindness-related places, but they are more expensive at those stores. Betsy At 04:36 AM 10/6/2009, you wrote: For you guys that play drums. My grandson age 12 has been taking drum lessons both private and in school. He is at the point where he is having difficulty reading the music. Is there anything that can be placed on the book to make it easy for him to read. I vaguely remember a plastic sheet that you placed on the printed page and it did magnify it. I could build a stand to hold it if needed. I don't know if they still make the item or what it was called. --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.comhttp://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. Send any questions regarding list management to: mailto:blindhandyman-owner%40yahoogroups.comblindhandyman-ow...@y ahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user _op=view_pagePAGE_id=33MMN_position=47:29http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ftp://ftp.acbra dio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturdayhttp://w ww.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/http://www.jaws-users.com /JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/http:// www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: mailto:blindhandyman-help%40yahoogroups.comYahooblindhandyman-hel p...@yahoogroups.comyahoo! Groups Links [Non-text portions of this message have been removed] Send any questions regarding list management to: mailto:blindhandyman-owner%40yahoogroups.comblindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturdayhttp://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: mailto:blindhandyman-help%40yahoogroups.comYahooblindhandyman-h...@yahoogroups.comyahoo! Groups Links __ NOD32 4484 (20091006) Information __ This message was checked by NOD32 antivirus system. http://www.eset.comhttp://www.eset.com [Non-text portions of this message have been
Re: [BlindHandyMan] Compound curve gauge.
Dale, sounds a most interesting gizmo. Presuming your router is offset say an inch and a half or something from the gauge, would not the curves radius have to be changed to be shallower on inside curves and sharper on outside curves so as to get the correct cut? this could of course be done by making a properly sized marker block to follow the curve as the tool would do. Hmmm, Maybe I'm wrong. Let us know how it works out, Also, how sharp a radius can you make with it? Thanks Tom Fowle
Re: [BlindHandyMan] Stripping and a Finishing Touch
the Over the Top thing to do would be strip it and french polish it. If the wood looks good, french polish would bring that out. However it's a ticklish and tricky thing to do, although it's perfectly blind friendly if you're carefull. French polish is a pure form of shelack disolved in alcohol and applied with a constantly moving oiled cloth applicator. It isn't a really durable finish but I understand can look very good if done well. Like I said, that's probably the cheap, time consumptive and over the top hard work thing to do. I wonder if one of the hand wiped on poly finishes wouldn't do pretty well, like the Minwax ones Dale reccommends. If they had heavy verithane on it to start with, they aren't fussing too much about keeping the wood's sound qualities with that stuff. Just thoughts, not reccommendations! I take no responsibility for results GRIN Tom Fowle
Re: [BlindHandyMan] Stereo Systems?
Ah man, the Nakamichi brings back some very fond memories. I had one of their cassette decks back in the day and it was well worth every penny I paid for it. I wonder if they are still around and yeah, Denon made some very fine stuff as well. It is amazing to see that Klipsch is still around, but I haven't heard much of their products, but the KG2 speakers I had way back when were very nice. Yeah, I had those babies backed up with a Carver pre-amp and power amp. Wow, this really brings back memories indeed. On Oct 7, 2009, at 10:47 PM, Spiro wrote: Denon has a Nakamichi type sound. Quite respectable. They make some of the most respected workhorse DVD players out there. I don't know the sound of either speaker, but have heard of EPI. On Wed, 7 Oct 2009, Lenny McHugh wrote: I ended up with Esone prior to that I was an EPI fan. My receiver is a Denon.Don't ask me models, I am lucky that I can still remember how to turn it on. - Original Message - From: Spiro sp...@iamspiro.com To: blindhandyman@yahoogroups.com Sent: Wednesday, October 07, 2009 12:15 AM Subject: Re: [BlindHandyMan] Stereo Systems? what brand did you get Lenny? I've had Yahama 500's, BW 804's, and the single driver version of the MBL speakers. I'd love to get BW 800 or 801, VonSchwiekert SR5, or The big MBl's. What amp made the Krutchfield's sing the way you like? Nothing I've heard does piano or accoustic quartets like an Audio Research with Joseph's. Great topic. On Mon, 5 Oct 2009, Lenny McHugh wrote: Dear Claudia, Wow! that is a very difficult question to answer. I have not done sound work in many years although I still follow some basic rules I had set when I installed systems. My first question is what type of music do you like? Many people equate the power output to volume. If you just want a rock system most 25 to 35 watt systems are ok. If you like classical I would never recommend anything less than 75 watts. The power in this case is not for volume but for response. With a low powered system you may not hear the triangle in a piece. Another rule that I used is that your speakers should be at a minimum of 50% of the total cost. If there is a good stereo shop near you go and listen to the same piece being played on different speaker systems. Quite a few years ago I wanted new speakers. I took Karen to let her listen. There was one set that my brother had but for me had too much presence, a great rock speaker. anyway I had the salesman play something using those speakers and Karen liked them. I then had him play the same piece on the speakers that I wanted and again she liked them. I had him go back to the first pair and she immediately stated that she did not want them in her house. I since upgraded and could not pass up the offer. Crutchfield had them on a end of model clearance. They were regular $1,200 on sale for $600. They had free shipping and I could use them in my home for 30 days. At that time if I did not like them they would pay the return shipping. This was an offer I could not pass I have the speakers for about 6 years now. --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. - Original Message - From: Claudia cdelreal1...@sbcglobal.net To: blindhandyman@yahoogroups.com Sent: Monday, October 05, 2009 3:16 PM Subject: [BlindHandyMan] Stereo Systems? Hi, How do I determine how many watts I want or need, in the purchase of a new stereo system? Is there somewhere on the Internet I can go to determine the difference in watts? Thanks. Claudia MSN: cdelreal1...@sbcglobal.net Skype: claudiadr2009 Join either of my groups; the first is for visually-impaired women, while the other is for people wishing to discuss homemaking issues. our-safe-haven-subscr...@googlegroups.com makinghouseworkeasier-subscr...@googlegroups.com Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemasterPAGE_user_op=view_pagePAGE_id=33MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address
Re: [BlindHandyMan] Stripping and a Finishing Touch
Hey Tom I actually had a chat with a gent at a music shop who did some setup work for me. This guy knows his stuff and I mean really knows his stuff. His recommendation in the end after a long discussion was to just fix it. His reasoning was based on the fact that if I got all the finish off, there could be gaps or other imperfections in the wood I'd then have to deal with. He said I could order a small can of the stuff and just fill it back in myself. He recommended applying it carefully over time and he said after about a month of allowing it to really harden, I could then sand it out and it would be as close to perfect as it would get. So, now to shop for the materials. Hell might as well fill in a couple of really small dings as well I had not noticed. I still like the idea, but he also said there is a place called Warmoth you can order parts and basically build an instrument. So, what the hell, I might just order the stuff and stain/finish something myself. Thanks for the ideas. On Oct 8, 2009, at 1:39 PM, Tom Fowle wrote: the Over the Top thing to do would be strip it and french polish it. If the wood looks good, french polish would bring that out. However it's a ticklish and tricky thing to do, although it's perfectly blind friendly if you're carefull. French polish is a pure form of shelack disolved in alcohol and applied with a constantly moving oiled cloth applicator. It isn't a really durable finish but I understand can look very good if done well. Like I said, that's probably the cheap, time consumptive and over the top hard work thing to do. I wonder if one of the hand wiped on poly finishes wouldn't do pretty well, like the Minwax ones Dale reccommends. If they had heavy verithane on it to start with, they aren't fussing too much about keeping the wood's sound qualities with that stuff. Just thoughts, not reccommendations! I take no responsibility for results GRIN Tom Fowle [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Stripping and a Finishing Touch
Scott, Find out if it has to be brushed on or can be hand applied. If hand, you might do pretty well. If it needs to be brushed on that could be pretty tricky. good luck and have fun. Tom
Re: [BlindHandyMan] electric motor question
I don't know really how you would do that without very specialized equipment but it really doesn't matter much so long as it performs to your requirements. There quite probably is a measure which can be said to produce a horsepower of that rating at least briefly and the manufacturer could probably produce that proof or definition but for practical purposes a horse and a half is about all you can get out of a 110 volt 15 amp circuit. My Delta 18 inch drum sander and my compressor will both trip a 15 amp breaker. The sander is rated at 1.5 HP but I have to watch not to feed it too fast and allow it to bog down. I always knew that my compressor over rated it's horsepower but it too will trip it's own 15 amp breaker I believe on start-up. Not all of the time, I often forget to turn it off and it will cycle for a couple of days then apparently get fed-up and shut itself off for me. I suppose that ideally one would power a treadmill with foot power. I don't much like treadmills for that reason and really they should only need to produce enough power to move the belt along. Big powerful motors really only exercise the power company turbines. The article I read on Wikipedia on horsepower indicated that a human can produce the 550 foot pounds only very briefly. a 3 horsepower treadmill presumably can do 1650 foot pounds indefinitely. What for? - Original Message - From: Edward Przybylek To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 8:47 AM Subject: RE: [BlindHandyMan] electric motor question Hi Dale, Pretty much, what you said is what I thought but I figured it wouldn't hurt to ask. How would I verify the horsepower of the motor? Both the manual and the label on the side of the motor claim it's 3.5 HP. My knowledge of electricity and motors is almost 0. Any information is greatly appreciated. Take care, Ed Przybylek From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Dale Leavens Sent: Wednesday, October 07, 2009 6:02 PM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question Well, it isn't the end of the world to trip a breaker so I wouldn't worry about it too much. I can however pretty well guarantee that motor isn't anything near 3.5 hp. regardless what they rate it at or tell you. Why would it have to be anyway, one horsepower is 550 foot pounds per second. Unless you are running an elephant or you have quite spectacular foot pounds you won't be taxing a motor anything like that hard. - Original Message - From: Edward Przybylek To: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com Sent: Wednesday, October 07, 2009 3:11 PM Subject: RE: [BlindHandyMan] electric motor question Hi all, I've been following this thread with much interest because we just purchased a new treadmill. The unit has a 3.5 horsepower motor, is capable of a 12% incline and has a top speed of 10 MPH. This discussion thread has concerned itself with motors 2.5 HP and lower and whether there needs to be a concern about breaker ratings. Given that this unit has a motor with 3.5 HP, are there concerns I should be addressing? We use the treadmill for power walking and I'm quite sure it will never see speeds much over 5 or 6 MPH. We've had the incline up to 8 percent and I'm sure we'll have it up to the 12% maximum before too long. We haven't popped a breaker yet but I just want to be sure that there isn't something I should be doing just as a precaution. Thanks. Take care, Ed Przybylek From: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com [mailto:blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com ] On Behalf Of Tom Fowle Sent: Wednesday, October 07, 2009 1:43 PM To: blindhandyman@yahoogroups.com mailto:blindhandyman%40yahoogroups.com Subject: Re: [BlindHandyMan] electric motor question David, One Horsepower is generally considered to require about 750 watts. so 2.25 HP will need a solid 1700 watts. This is probably a peak rating, but none th less it must be on a 20 amp circuit that isn't used much. If you have a coule 200 watt outside lights on at the same time, it will get very close to the max rating of a 20 amp circuit. tom [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Compound curve gauge.
Hi Tom, The tightest I could get was about a 4.5 inch radius, a 9 inch diameter circle. I have an offset base for a router intended for scribing say a cabinet to a wall, I think I could use the gauge as a wall with the right set-up and arrive at the same effect. It might even be possible to clamp the guide to the under side of a sheet and follow it with a pattern cutting bit bearing. that would be cool! - Original Message - From: Tom Fowle To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 1:25 PM Subject: Re: [BlindHandyMan] Compound curve gauge. Dale, sounds a most interesting gizmo. Presuming your router is offset say an inch and a half or something from the gauge, would not the curves radius have to be changed to be shallower on inside curves and sharper on outside curves so as to get the correct cut? this could of course be done by making a properly sized marker block to follow the curve as the tool would do. Hmmm, Maybe I'm wrong. Let us know how it works out, Also, how sharp a radius can you make with it? Thanks Tom Fowle [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Stripping and a Finishing Touch
Tom, good point. THis gent was actually talking about what he referred to as drop on application. I did not think to ask if he used a brush, but apparently he said you just fill-in the area, so I'll have to find out exactly what the application is. I was thinking applying with a rag or something, but well something to find out. If worse comes to worse and it requires a brush, I may pay my wife since it would be cheaper than having it done at a shop. Especially the way this guy was talking, it isn't a super fast process. On Oct 8, 2009, at 4:20 PM, Tom Fowle wrote: Scott, Find out if it has to be brushed on or can be hand applied. If hand, you might do pretty well. If it needs to be brushed on that could be pretty tricky. good luck and have fun. Tom [Non-text portions of this message have been removed]
[BlindHandyMan] Suggestions on a New Cordless Drill
Hi Guys and gals, Time to replace the El Cheapo drill with a good one. Which would you suggest? It most likely will be purchased at Lowe's or online. The ones at Lowe's that are under concideration are Hitachi, Dewalt, Bosch and Porter-Cable. Looking at 18 Volt, variable speed, 1/2 keyless chuck. What about the battery amp hour? Any other suggestions such as brand, torque, etc. Thanks, Ward [Non-text portions of this message have been removed]
[BlindHandyMan] sound travelling
If I replace the cheap hollow core door on my son's bedroom door, will that help with the noise control from his radio? His room is at the top of the stairs and his music travels right down. I suspect this will drive me crazier as he gets older. *smile* Jennifer [Non-text portions of this message have been removed]
Re: [BlindHandyMan] sound travelling
Maybe buy him headphones? Well okay, it may help, but then you have walls and the like to deal with. I guess you could install sound damping materials on the walls and door, but the headphones would probably be less expensive. Oh yeah, if he likes it loud enough, instead of saving for a college fund, maybe a hearing aide fund might be more worthwhile. grin. On Oct 8, 2009, at 6:14 PM, Jennifer Jackson wrote: If I replace the cheap hollow core door on my son's bedroom door, will that help with the noise control from his radio? His room is at the top of the stairs and his music travels right down. I suspect this will drive me crazier as he gets older. *smile* Jennifer [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] sound travelling
Oh Jennifer, I so hear you!!! Headphones was the only answer when my kids were that age. Now they have really cool wireless headphones that some people really prefer to just speakers. However, I think a hearing aid fund for both you and your sun is in order. Betsy At 12:14 PM 10/8/2009, you wrote: If I replace the cheap hollow core door on my son's bedroom door, will that help with the noise control from his radio? His room is at the top of the stairs and his music travels right down. I suspect this will drive me crazier as he gets older. *smile* Jennifer [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] sound travelling
hi if you put in a solid door that should help. also back in the day my bed room was across from my parents room. there was a heating duct there. for all summer i took off the grill and stuffed it with foam rubber to keep the noise from going right through. also if his speakers are hanging on the wall hang them from the ceiling using rope. the rope will help dampen the sound that is transmitted through the walls. or if they are on a hard surface try putting a thick pad of some sort under them to do the same thing. Jim [Non-text portions of this message have been removed]
RE: [BlindHandyMan] Suggestions on a New Cordless Drill
I just got a DeWalt 18 volt, compact cordless drill. I like it. Lots of power. The chuck is a good one. The compact one I have is considerably smaller than DeWalt's standard cordless 18v. Blessings, Tom -Original Message- From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]on Behalf Of Ward Kathy Dudley Sent: Thursday, October 08, 2009 4:53 PM To: blindhandyman@yahoogroups.com Subject: [BlindHandyMan] Suggestions on a New Cordless Drill Hi Guys and gals, Time to replace the El Cheapo drill with a good one. Which would you suggest? It most likely will be purchased at Lowe's or online. The ones at Lowe's that are under concideration are Hitachi, Dewalt, Bosch and Porter-Cable. Looking at 18 Volt, variable speed, 1/2 keyless chuck. What about the battery amp hour? Any other suggestions such as brand, torque, etc. Thanks, Ward [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Suggestions on a New Cordless Drill
I have the Dewalt and it's done great for me. If you go on tooliday.com they have a Milwaukee 18 volt kit for $139. It's reconditioned, but it's still under warranty for a year. That is also a good tool brand. One thing to think about with Dewalt. The battery fits anything that is 18 volts. So if you decide later to add a saw, an impact driver, my personal favorite of their line, or any other tool that uses 18 volts, the battery will fit any one of the tools. You can go online and find sales on tool only and it's a bunch cheaper. Just something to consider. - Original Message - From: Ward Kathy Dudley To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 5:53 PM Subject: [BlindHandyMan] Suggestions on a New Cordless Drill Hi Guys and gals, Time to replace the El Cheapo drill with a good one. Which would you suggest? It most likely will be purchased at Lowe's or online. The ones at Lowe's that are under concideration are Hitachi, Dewalt, Bosch and Porter-Cable. Looking at 18 Volt, variable speed, 1/2 keyless chuck. What about the battery amp hour? Any other suggestions such as brand, torque, etc. Thanks, Ward [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] sound travelling
It will help some but you might like to examine the door when it is closed and see how much air space there is around it. Most sound travels directly through air so if there is half an inch gap say under the door installing a floor sweep will reduce the sound easily and cheaply. Depending on the set-up you might also consider some weather stripping. not usually used indoors of course but again if it seals the air around the door a little it will also go a long way to reduce noise. A thin strip of felt for example will also muffle slamming doors occasionally noticed with teenagers. - Original Message - From: Jennifer Jackson To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 6:14 PM Subject: [BlindHandyMan] sound travelling If I replace the cheap hollow core door on my son's bedroom door, will that help with the noise control from his radio? His room is at the top of the stairs and his music travels right down. I suspect this will drive me crazier as he gets older. *smile* Jennifer [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
RE: [BlindHandyMan] Suggestions on a New Cordless Drill
One more thing on the DeWalt. Around here they are running specials in which you buy a tool with battery and charger, and get a free battery. It's always handy to have two batteries, so you don't run out in the middle of a project. Blessings, Tom -Original Message- From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]on Behalf Of Bob Kennedy Sent: Thursday, October 08, 2009 7:46 PM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] Suggestions on a New Cordless Drill I have the Dewalt and it's done great for me. If you go on tooliday.com they have a Milwaukee 18 volt kit for $139. It's reconditioned, but it's still under warranty for a year. That is also a good tool brand. One thing to think about with Dewalt. The battery fits anything that is 18 volts. So if you decide later to add a saw, an impact driver, my personal favorite of their line, or any other tool that uses 18 volts, the battery will fit any one of the tools. You can go online and find sales on tool only and it's a bunch cheaper. Just something to consider. - Original Message - From: Ward Kathy Dudley To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 5:53 PM Subject: [BlindHandyMan] Suggestions on a New Cordless Drill Hi Guys and gals, Time to replace the El Cheapo drill with a good one. Which would you suggest? It most likely will be purchased at Lowe's or online. The ones at Lowe's that are under concideration are Hitachi, Dewalt, Bosch and Porter-Cable. Looking at 18 Volt, variable speed, 1/2 keyless chuck. What about the battery amp hour? Any other suggestions such as brand, torque, etc. Thanks, Ward [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] sound travelling
I was spoiled when I was a teenager. We put thick Berber carpet on my walls, but teaching consideration for others would be better, all-be-it probably impossible or too painful for you personally. I don't have teenagers yet. Start praying now, it's only 6 years away. hahahahah, - Original Message - From: Scott Howell To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 5:23 PM Subject: Re: [BlindHandyMan] sound travelling Maybe buy him headphones? Well okay, it may help, but then you have walls and the like to deal with. I guess you could install sound damping materials on the walls and door, but the headphones would probably be less expensive. Oh yeah, if he likes it loud enough, instead of saving for a college fund, maybe a hearing aide fund might be more worthwhile. grin. On Oct 8, 2009, at 6:14 PM, Jennifer Jackson wrote: If I replace the cheap hollow core door on my son's bedroom door, will that help with the noise control from his radio? His room is at the top of the stairs and his music travels right down. I suspect this will drive me crazier as he gets older. *smile* Jennifer [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] Suggestions on a New Cordless Drill
Oh yeah, I'd put 2 batteries at the top of the list of considerations. I never want to be caught without a back-up. - Original Message - From: Tom Vos To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 9:07 PM Subject: RE: [BlindHandyMan] Suggestions on a New Cordless Drill One more thing on the DeWalt. Around here they are running specials in which you buy a tool with battery and charger, and get a free battery. It's always handy to have two batteries, so you don't run out in the middle of a project. Blessings, Tom -Original Message- From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]on Behalf Of Bob Kennedy Sent: Thursday, October 08, 2009 7:46 PM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] Suggestions on a New Cordless Drill I have the Dewalt and it's done great for me. If you go on tooliday.com they have a Milwaukee 18 volt kit for $139. It's reconditioned, but it's still under warranty for a year. That is also a good tool brand. One thing to think about with Dewalt. The battery fits anything that is 18 volts. So if you decide later to add a saw, an impact driver, my personal favorite of their line, or any other tool that uses 18 volts, the battery will fit any one of the tools. You can go online and find sales on tool only and it's a bunch cheaper. Just something to consider. - Original Message - From: Ward Kathy Dudley To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 5:53 PM Subject: [BlindHandyMan] Suggestions on a New Cordless Drill Hi Guys and gals, Time to replace the El Cheapo drill with a good one. Which would you suggest? It most likely will be purchased at Lowe's or online. The ones at Lowe's that are under concideration are Hitachi, Dewalt, Bosch and Porter-Cable. Looking at 18 Volt, variable speed, 1/2 keyless chuck. What about the battery amp hour? Any other suggestions such as brand, torque, etc. Thanks, Ward [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Re: [BlindHandyMan] sound travelling
He really is pretty good about it. It is just that the noise carries straight down the stairs and into the tiled entry way. He also plays the cello and drum. I suspect the noise level will only become more of a problem. Still the headphones are a good idea. Jennifer - Original Message - From: Matt To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 9:17 PM Subject: Re: [BlindHandyMan] sound travelling I was spoiled when I was a teenager. We put thick Berber carpet on my walls, but teaching consideration for others would be better, all-be-it probably impossible or too painful for you personally. I don't have teenagers yet. Start praying now, it's only 6 years away. hahahahah, - Original Message - From: Scott Howell To: blindhandyman@yahoogroups.com Sent: Thursday, October 08, 2009 5:23 PM Subject: Re: [BlindHandyMan] sound travelling Maybe buy him headphones? Well okay, it may help, but then you have walls and the like to deal with. I guess you could install sound damping materials on the walls and door, but the headphones would probably be less expensive. Oh yeah, if he likes it loud enough, instead of saving for a college fund, maybe a hearing aide fund might be more worthwhile. grin. On Oct 8, 2009, at 6:14 PM, Jennifer Jackson wrote: If I replace the cheap hollow core door on my son's bedroom door, will that help with the noise control from his radio? His room is at the top of the stairs and his music travels right down. I suspect this will drive me crazier as he gets older. *smile* Jennifer [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
