Cisco Routers and Radius Authentication [7:16403]
I'm trying to configure Cisco routers (7206,3662, 2600, etc...) to use Radius authentication. I'd like the authenticated user(s) to either be dropped directly into enable mode or left only at the telnet prompt based on their authority (defined by the Radius server). I'm assuming this involves two levels of AAA. Authentication and Authorization. I have been able to configure a 3662 (Version 12.2(2)T) to allow authentication and leave the logged on user at an enable prompt without requiring the user to enter the 'enable' command. What I am unable to get to work properly is the latter part of my requirement. i.e. those without authority to enable mode only get the telnet prompt and view access to the router. Any suggestions on how to allow this configuration? Here's my configuration; -- -- Radiator Radius is my radius server. Cisco router: - aaa new-model aaa authentication login default group radius enable aaa authentication enable default group radius enable aaa authorization exec default group radius local radius-server host 200.x.x.x auth-port 1645 acct-port 1646 key 7 radius-server retransmit 3 -- David A. Lauer IFX Communications Ventures Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16403t=16403 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Routers and Radius Authentication [7:16310]
I'm trying to configure Cisco routers (7206,3662, 2600, etc...) to use Radius authentication. I'd like the authenticated user(s) to either be dropped directly into enable mode or left only at the telnet prompt based on their authority (defined by the Radius server). I'm assuming this involves two levels of AAA. Authentication and Authorization. I have been able to configure a 3662 (Version 12.2(2)T) to allow authentication and leave the logged on user at an enable prompt without requiring the user to enter the 'enable' command. What I am unable to get to work properly is the latter part of my requirement. i.e. those without authority to enable mode only get the telnet prompt and view access to the router. Any suggestions on how to allow this configuration? Here's my configuration; -- -- Radiator Radius is my radius server. Cisco router: - aaa new-model aaa authentication login default group radius enable aaa authentication enable default group radius enable aaa authorization exec default group radius local radius-server host 200.x.x.x auth-port 1645 acct-port 1646 key 7 radius-server retransmit 3 -- David A. Lauer IFX Communications Ventures Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16310t=16310 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Routers and Radius Authentication [7:16232]
I'm trying to configure Cisco routers (7206,3662, 2600, etc...) to use Radius authentication. I'd like the authenticated user(s) to either be dropped directly into enable mode or left only at the telnet prompt based on their authority (defined by the Radius server). I'm assuming this involves two levels of AAA. Authentication and Authorization. I have been able to configure a 3662 (Version 12.2(2)T) to allow authentication and leave the logged on user at an enable prompt without requiring the user to enter the 'enable' command. What I am unable to get to work properly is the latter part of my requirement. i.e. those without authority to enable mode only get the telnet prompt and view access to the router. Any suggestions on how to allow this configuration? Here's my configuration; -- -- Radiator Radius is my radius server. Cisco router: - aaa new-model aaa authentication login default group radius enable aaa authentication enable default group radius enable aaa authorization exec default group radius local radius-server host 200.x.x.x auth-port 1645 acct-port 1646 key 7 radius-server retransmit 3 -- David A. Lauer IFX Communications Ventures Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16232t=16232 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: difficult ccna question
Wouldn't the first subnet be 172.16.0.0? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Joshua Beining Sent: Thursday, March 22, 2001 11:43 AM To: 'Lowell Sharrah' Cc: '[EMAIL PROTECTED]' Subject: RE: difficult ccna question Based on the subnet mask (255.255.192.0) subtract 256 from 192 which is 64. Therefore 64 is your first subnet. To get the second subnet, add 64 to the first subnet. To get the third add 64 to the second subnet and so on. Continue in this fashion until you reach 192. Remember that you cannot use the ranges 172.16.0.1 - 172.16.0.62 and 172.16.255.193 - 172.16.255.254 (network and broadcast respectively) unless your router is configured to do so. Subnet Host Range 1 172.16.0.65 - 172.16.0.126 2 172.16.0.129 - 172.16.0.190 3 172.16.0.193 - 172.16.0.254 4 172.16.1.1 - 172.16.1.62 5 172.16.1.65 - 172.16.1.126 6 172.16.1.129 - 172.16.1.190 7 172.16.1.193 - 172.16.1.254 8 172.16.2.1 - 172.16.2.62 9 172.16.2.65 - 172.16.2.126 10 172.16.2.129 - 172.16.2.190 . . . . . . 1015 172.16.253.193 - 172.16.253.254 1016 172.16.254.1 - 172.16.254.62 1017 172.16.254.65 - 172.16.254.126 1018 172.16.254.129 - 172.16.254.190 1019 172.16.254.193 - 172.16.254.254 1020 172.16.255.1 - 172.16.255.62 1021 172.16.255.65 - 172.16.255.126 1022 172.16.255.129 - 172.16.255.190 -Joshua -Original Message- From: Lowell Sharrah [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 22, 2001 8:14 AM To: [EMAIL PROTECTED] Subject: RE: difficult ccna question how do you know where the first subnet begins? Joshua Beining [EMAIL PROTECTED] 03/22/01 10:34AM Just remember the following fomulas: (2^# of masked bits) - 2 = Total # of subnets (2^# of unmasked bits - 2 = Total # of hosts Based on this the correct answer is A. -Original Message- From: George [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 22, 2001 12:16 AM To: [EMAIL PROTECTED] Subject: difficult ccna question if you have a class B network with a 10-bit subnet mask, how many subnet and how many hosts do you have? a. 1022 subnets, 62 hosts b. 62 subnets, 8190 hosts c. 8190 subnets, 254 hosts d. 254 subnets , 126 hosts _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: difficult ccna question
Can you give examples of OSs that don't support all ones? -Original Message- From: Joshua Beining [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 22, 2001 2:44 PM To: 'David A. Lauer' Cc: '[EMAIL PROTECTED]' Subject: RE: difficult ccna question Technically yes. But like most things you cannot get something for free. There is a price for subnetting which is that you loose the first subnet (network - all zeros) and the last subnet (broadcast - all ones). Note that with some routers you can configure them to use these subnets. But be careful, because some OS's and devices do not react well to using then. HTH. -Joshua -Original Message- From: David A. Lauer [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 22, 2001 11:14 AM To: [EMAIL PROTECTED] Subject: RE: difficult ccna question Wouldn't the first subnet be 172.16.0.0? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Joshua Beining Sent: Thursday, March 22, 2001 11:43 AM To: 'Lowell Sharrah' Cc: '[EMAIL PROTECTED]' Subject: RE: difficult ccna question Based on the subnet mask (255.255.192.0) subtract 256 from 192 which is 64. Therefore 64 is your first subnet. To get the second subnet, add 64 to the first subnet. To get the third add 64 to the second subnet and so on. Continue in this fashion until you reach 192. Remember that you cannot use the ranges 172.16.0.1 - 172.16.0.62 and 172.16.255.193 - 172.16.255.254 (network and broadcast respectively) unless your router is configured to do so. Subnet Host Range 1 172.16.0.65 - 172.16.0.126 2 172.16.0.129 - 172.16.0.190 3 172.16.0.193 - 172.16.0.254 4 172.16.1.1 - 172.16.1.62 5 172.16.1.65 - 172.16.1.126 6 172.16.1.129 - 172.16.1.190 7 172.16.1.193 - 172.16.1.254 8 172.16.2.1 - 172.16.2.62 9 172.16.2.65 - 172.16.2.126 10 172.16.2.129 - 172.16.2.190 . . . . . . 1015 172.16.253.193 - 172.16.253.254 1016 172.16.254.1 - 172.16.254.62 1017 172.16.254.65 - 172.16.254.126 1018 172.16.254.129 - 172.16.254.190 1019 172.16.254.193 - 172.16.254.254 1020 172.16.255.1 - 172.16.255.62 1021 172.16.255.65 - 172.16.255.126 1022 172.16.255.129 - 172.16.255.190 -Joshua -Original Message- From: Lowell Sharrah [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 22, 2001 8:14 AM To: [EMAIL PROTECTED] Subject: RE: difficult ccna question how do you know where the first subnet begins? Joshua Beining [EMAIL PROTECTED] 03/22/01 10:34AM Just remember the following fomulas: (2^# of masked bits) - 2 = Total # of subnets (2^# of unmasked bits - 2 = Total # of hosts Based on this the correct answer is A. -Original Message- From: George [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 22, 2001 12:16 AM To: [EMAIL PROTECTED] Subject: difficult ccna question if you have a class B network with a 10-bit subnet mask, how many subnet and how many hosts do you have? a. 1022 subnets, 62 hosts b. 62 subnets, 8190 hosts c. 8190 subnets, 254 hosts d. 254 subnets , 126 hosts _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Bandwidth on demand off a DS3
you might be able to use Dyband from Crosskeys. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jack Sent: Thursday, March 22, 2001 10:04 PM To: [EMAIL PROTECTED] Subject: Bandwidth on demand off a DS3 I have a customer ( a hotel) who is looking to offer video conferencing capabilities to their customers. They have a DS3 and 10 conference rooms. What they want is an easy way to increase or limit the bandwidth available to those conference rooms as needed. For instance, lets say 5 room needs 5 megs and 2 rooms need 10 megs. So I'm guessing they need some device similarto that used by an ISP to set CIR on a frame circuit. Anyone know of a way this can be done? What's important is ease of use. The allocation of B/W would probably need to be done at the front desk, almost instantaneously and by someone who isn't that computer savvy so a GUI is key. Thanks in advance _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Clocking provided by 3640 router
I think the way to configure this would be just that. Have one routers clock set to internal and the others set to get it's clock from the line (provided by the other router). -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Zwaanswijk, John Sent: Wednesday, March 21, 2001 10:38 AM To: [EMAIL PROTECTED] Subject: Clocking provided by 3640 router Hi everybody, Can someone help me with the following problem I've a customer with two 3640 router, both connected via an E1 interface to a satellite dish on both customer sides. The problem is that the satellite link does not provide any clocking, it is a transparent connection ( the supplier told me that), so the routers are running on their own clocks, and a few times a day they are running out of sync, and the line is going down, and up again in a few seconds. Is it possible that one of the routers provide a clock to the satellite link, and that it is transported via the satellite, so the other router can use this clock for synchronisation. Regards John Zwaanswijk _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Multiple T1's
Could you also configure these as point-to-point interfaces with /30 addresses and run a dynamic routing protocol, i.e. OSPF which would allow for both routes to perform load balancing and failover? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vijay Ramcharan Sent: Wednesday, March 21, 2001 11:31 AM To: Cisco Groupstudy. com Mailing list (E-mail) Subject: Multiple T1's To revisit this question from yesterday, could the following be done and what does it accomplish, if anything? The question posed is below. "Jason Stephens" [EMAIL PROTECTED] wrote in message 998ndv$1fh$[EMAIL PROTECTED]">news:998ndv$1fh$[EMAIL PROTECTED]... We have a situation where we want to have 2 t1's going to another office. We want these 2 t1's to not only provide redundancy in case 1 goes down, but also want them to load balance while they are both up. So basically, we want the two t1's to be up providing 3 mpbs of bandwidth and if one goes down for it to automatically send all traffic to the t1 that is still up. We have 3600 series routers on both ends. Can this be done? If so, please explain how. I looked into the Multilink PPP stuff, but it seems to be only for async ports. Thanks for any info in advance! Is this possible to achieve using the solution below? Use a "backup interface" command along with "backup load" and "backup delay" commands to achieve redundancy and load balancing. Both T1's are correctly configured and are connected to the same router. Static routes are used for each T1 using "ip route 0.0.0.0 0.0.0.0 next-hop-address". By my reasoning, by using the backup interface command on the primary line, if the primary line goes down the second line is used automatically to route traffic. If the primary line exceeds the load specified by the "backup load" command, the second line is put into use automatically. The "backup delay" command just tells the router to stop using the second line when usage on the primary line drops below the predefined load. Any input would be appreciated. Thanks. Vijay Ramcharan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vijay Ramcharan Sent: Tuesday, March 20, 2001 6:34 PM To: [EMAIL PROTECTED] Subject: RE: Multiple T1's In this scenario, is it possible to use a "backup interface" command along with "backup load" and "backup delay" commands to achieve redundancy and load balancing? Providing that both T1's are correctly configured and are connected to the same router? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Howard C. Berkowitz Sent: Tuesday, March 20, 2001 5:39 PM To: [EMAIL PROTECTED] Subject: RE: Multiple T1's At 02:12 PM 3/20/2001 -0800, you wrote: If you are running EIGRP as your routing protocol, it will take care of the load balancing for you without the added complexity and CPU overhead of PPP multilink. There are some great EIGRP config guides on CCO. Chris Lemagie I don't understand what advantage EIGRP would give. First, no routing protocol load balances. It is the routing table task that makes the final decision about load balancing, with the mode dependent on the switching modes of the output interfaces. Second, any routing protocol, except standard BGP (i.e., without Cisco extensions) and OSPF externals, can produce equal-cost routes eligible for load balancing. EIGRP and IGRP can produce unequal-cost routes eligible for load balancing, but the media here specifically are equal cost -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Brian Sent: Tuesday, March 20, 2001 1:57 PM To: [EMAIL PROTECTED] Subject: Re: Multiple T1's On each end, static route traffic out both interfaces. Bri "Jason Stephens" [EMAIL PROTECTED] wrote in message 998ndv$1fh$[EMAIL PROTECTED]">news:998ndv$1fh$[EMAIL PROTECTED]... We have a situation where we want to have 2 t1's going to another office. We want these 2 t1's to not only provide redundancy in case 1 goes down, but also want them to load balance while they are both up. So basically, we want the two t1's to be up providing 3 mpbs of bandwidth and if one goes down for it to automatically send all traffic to the t1 that is still up. We have 3600 series routers on both ends. Can this be done? If so, please explain how. I looked into the Multilink PPP stuff, but it seems to be only for async ports. Thanks for any info in advance! _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info:
RE: loopback test
Why would you need to? Do you have a link light at the interface port and the hub/switch? Does the interface show Interface UP line Protocol up? Cat 5 ethernet uses the 568B pinout for the RJ45 connectors. You could create loopback plug by cross-connecting pins 1-3 and 2-6. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of zd z Sent: Monday, March 19, 2001 4:26 AM To: [EMAIL PROTECTED] Subject: loopback test Is there any one knows how to do the loopback test on ethernet or fastethernet port ? __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 2500 wont save config
Is this list turning confrontational to those who use it. It seems your remark "its not one that someone would ask in your position" to this post is out of line. You don't know anything about this persons position or experience. Additionally isn't this an open list where all can contribute and participate? DaL -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of The.Rock Sent: Monday, March 19, 2001 12:03 PM To: [EMAIL PROTECTED] Subject: Re: 2500 wont save config It might not save due to lack of mem. Make sure you have enough room to hold both the current IOS as well as the one your trying to upgrade. Otherwise you will need to delete one of them first. Being that your on IOS 10.3 tells me that probably you don't have enough memory. And I see your title." LAN Engineer". I'm not picking on you, but it just seems that for the question you just asked, its not one that someone would ask in your position. This goes back to the paper cert thing ""Plantier, William (Spencer)"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have a 2500 router with 10.3 IOS and I cant save the config. Any suggestions? Wm. Spencer Plantier LAN Engineer (919) 474-1300 ext 0873 Office (919) 474-1056 Fax (919)696-8848 Cell [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Off topic(Kinda) Link to website which compares Book Prices
check out bestbookbuys.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Brian Sent: Monday, March 19, 2001 1:36 PM To: Eric Gunn Cc: [EMAIL PROTECTED] Subject: Re: Off topic(Kinda) Link to website which compares Book Prices I like www.mysimon.com. Bri On Mon, 19 Mar 2001, Eric Gunn wrote: I am going to be adding Caslow 2nd edition to my book collection and remember seeing a website that compared the prices of the various book stores when you search for a book. Would someone be kind enough to post the link? Thank You, -Eric _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: loopback the WIC card, how is it done?
It's a configuration command under the T1 controller. i.e.; config t controller t1 slot/port loopback {diagnostic |local {payload | line}|remote {iboc |esf {payload | line}} DaL -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Bullock, Jason (1125) Sent: Monday, March 19, 2001 6:05 PM To: '[EMAIL PROTECTED] ' Subject: RE: loopback the WIC card, how is it done? Hey Listers. I was thinking about this cool thing one of the cisco TAC engineers did when helping me troubleshoot a tricky network problem a few months ago. They looped up my serial interface on a 2600 to verify the WIC card was working properly, and that the attached CSU was not faulty. They configured the WIC interface to show up and up , even though there T1 was down. The problem is , I can not remember the command sets that were run to make this work. ! Anyone know this one? ugh. jason -Original Message- From: Tony van Ree To: David A. Lauer; [EMAIL PROTECTED] Sent: 3/19/2001 4:17 PM Subject: RE: loopback test Hi, If you want to check your protocol stack you should be able to ping yourself, check you ip interfaces and/or check your route table (assuming IP is used). There are a number of utilities that check network cards. Teunis Hobart, Tasmania Australia On Monday, March 19, 2001 at 07:56:26 AM, David A. Lauer wrote: Why would you need to? Do you have a link light at the interface port and the hub/switch? Does the interface show Interface UP line Protocol up? Cat 5 ethernet uses the 568B pinout for the RJ45 connectors. You could create loopback plug by cross-connecting pins 1-3 and 2-6. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of zd z Sent: Monday, March 19, 2001 4:26 AM To: [EMAIL PROTECTED] Subject: loopback test Is there any one knows how to do the loopback test on ethernet or fastethernet port ? __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IPX Help
How about routing IPX over a WAN? What are the issues and performance hits? DaL -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Bradley J. Wilson Sent: Monday, March 19, 2001 5:54 PM To: cisco Subject: Re: IPX Help The command "no ipx routing" will clear up *all* your troubles. ;-) BJ - Original Message - From: Nabil Fares To: [EMAIL PROTECTED] Sent: Monday, March 19, 2001 5:32 PM Subject: IPX Help Greetings all, I'm trying to find out how routers treat IPX traffic, is there any type of switching or optimization taking place. I hope my questions is clear! Thanks, Nabil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Need help configuring DDR on 805
looks like you might be missing the username and password, needed on both sides for authentication. username 'name' password 'secret' The username is case sensitive and must match the opposite router's hostname. The password is also case sensitive and must match the password set in the opposite router's corresponding username definition. Dal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Indy Sent: Friday, March 16, 2001 4:07 AM To: [EMAIL PROTECTED] Subject: Re: Need help configuring DDR on 805 This is the config I figure by using fast step software combined with CLI from cisco homepage. I might do some testing tommorow. version 12.0 no service pad service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname cisco805 ! logging buffered 10240 debugging enable secret 5 ! ip subnet-zero no ip source-route ! chat-script dial ABORT ERROR "" "AT Z" OK "ATDT \T" TIMEOUT 60 CONNECT \c ! ! process-max-time 200 ! interface Ethernet0 ip address 192.168.2.1 255.255.255.0 ip access-group 121 in no ip directed-broadcast no ip proxy-arp ip nat inside ! interface Serial0 physical-layer async no ip address no ip directed-broadcast encapsulation ppp dialer in-band dialer pool-member 7 async mode dedicated no fair-queue ppp authentication chap pap callin ! interface Dialer1 ip address negotiated no ip directed-broadcast encapsulation ppp dialer remote-name dnet dialer idle-timeout 300 dialer string 21,5550019 modem-script dial dialer pool 7 dialer-group 7 no cdp enable ppp authentication chap pap callin ppp pap sent-username udin password 7 ** ! ip nat inside source list 18 interface Serial0 overload no ip http server ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ! access-list 18 permit 192.168.2.0 0.0.0.255 access-list 121 deny udp any eq netbios-dgm any access-list 121 deny udp any eq netbios-ns any access-list 121 deny udp any eq netbios-ss any access-list 121 deny tcp any eq 137 any access-list 121 deny tcp any eq 138 any access-list 121 deny tcp any eq 139 any access-list 121 permit ip any any dialer-list 7 protocol ip permit ! line con 0 exec-timeout 0 0 transport input none stopbits 1 line 1 modem InOut transport input all stopbits 1 speed 33600 flowcontrol hardware line vty 0 4 exec-timeout 0 0 login local ! end "Piatnitchi Cristian" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Try this it works on 1600 . I think is better to send us the config that you are using. Cristian ! version 11.3 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname C1600 ! enable secret 5 // enable password ?? ! chat-script dial ABORT ERROR "" "AT Z" OK "ATDP \T" TIMEOUT 50 CONNECT ! ! ! interface Ethernet0 ip address 172.199.1.5 255.255.255.0 ! interface Serial0 physical-layer async ip address negotiated encapsulation ppp dialer in-band dialer string 9,2331417 dialer-group 1 async mode interactive no peer default ip address no cdp enable ppp chap refuse ppp pap sent-username test password 7 ? ! ip classless ip route 0.0.0.0 0.0.0.0 Serial0 ! dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit ! line con 0 line 1 autoselect ppp script dialer dial login modem InOut modem autoconfigure discovery transport input all stopbits 1 speed 115200 flowcontrol hardware line vty 0 4 password telnet login ! end _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TCPmag.com Salary Survey
Tried to get there but wasn't successful. Is this an open site? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Thangavel .V.M Sent: Friday, March 16, 2001 6:43 AM To: [EMAIL PROTECTED] Subject: TCPmag.com Salary Survey Hi, See how much CCIE, CCNP and CCNA's are paid http://tcpmag.com/salarysurvey/2001/default.asp?id=3DSALARY01cid=3D89 Regards / Thangavel _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TCPmag.com Salary Survey
Got it! thanks. -Original Message- From: Damien Kelly [mailto:[EMAIL PROTECTED]] Sent: Friday, March 16, 2001 10:43 AM To: 'David A. Lauer'; [EMAIL PROTECTED] Subject: RE: TCPmag.com Salary Survey drop everything after default.asp ( ie: ?id=3DSALARY01cid=3D89 ) -Original Message- From: David A. Lauer [SMTP:[EMAIL PROTECTED]] Sent: Friday, March 16, 2001 3:36 PM To: [EMAIL PROTECTED] Subject: RE: TCPmag.com Salary Survey Tried to get there but wasn't successful. Is this an open site? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Thangavel .V.M Sent: Friday, March 16, 2001 6:43 AM To: [EMAIL PROTECTED] Subject: TCPmag.com Salary Survey Hi, See how much CCIE, CCNP and CCNA's are paid http://tcpmag.com/salarysurvey/2001/default.asp?id=3DSALARY01cid=3D89 Regards / Thangavel _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ** The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This message and any attachments have been scanned for viruses. Orbiscom Ltd. will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. www.Orbiscom.com ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BSCN
BSCN - CCNP Routing Test taken and passed. Score: 801 alot of BGP questions. Some redistribution, EIGRP and whatifs. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Reverse Telnet on 2600 routers not working
exactly what is accomplished by this configuration and command? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, March 13, 2001 6:34 AM To: [EMAIL PROTECTED] Subject: RE: Reverse Telnet on 2600 routers not working reverse telnet to next device. Aux port is line 65 on 3620/2600 series. 129 on 3640. 1. Configure ip address on box. ie. config t int loopback 0 ip address 10.10.10.1 255.255.255.255 2. configure line aux port. line aux 0 transport input all exec 3. Test telnet 10.10.10.1 2065 This message was sent by Cosmiverse. http://www.cosmiverse.com Get Your Free Email Account Today! Join us Today as a Digital Passenger aboard Cosmic Voyage 2000 ( http://www.cosmicvoyage2000.com )! _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Rip 2 and VLSM Does rip 2 support VLSM
What version? My understanding is RIP v1 does not and RIP v2 does. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Atul Kumar Udupi Sent: Tuesday, March 13, 2001 7:00 AM To: [EMAIL PROTECTED] Subject: Re: Rip 2 and VLSM "Does rip 2 support VLSM" Yes it does adam lee [EMAIL PROTECTED] wrote in message 01c0a795$4456f890$075901c0@meanboy4">news:01c0a795$4456f890$075901c0@meanboy4... Sure does. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, January 16, 2001 11:43 AM To: [EMAIL PROTECTED] Subject: Rip 2 and VLSM "Does rip 2 support VLSM" Does Rip 2 support VLSM?? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 6500 Catalyst Boots straight to MSFC router module ...
What version of IOS? They may have the new IOS called True IOS which in my understanding negates the need for separate management. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hornbeck, Timothy Sent: Monday, March 12, 2001 3:21 PM To: '[EMAIL PROTECTED]' Subject: 6500 Catalyst Boots straight to MSFC router module ... We just received 4 new 6500's. Unboxed and powered them up, they boot straight to the Router prompt. How do we get to the Switch prompt. We have tried to CTRL+SHIFT+6, X and other key sequences, but have been unsuccessful. Thanks for your help in advance. - Tim Hornbeck _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Reverse Telnet on 2600 routers not working
Do you need to have the 'login' command under the 'line aux 0' heading? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Monday, March 12, 2001 2:50 PM To: [EMAIL PROTECTED] Subject: Reverse Telnet on 2600 routers not working I posted this problem about a year or so ago and we never did find a resolution to it and I still can't find anything on CCO about it. The problem is that I can't reverse telnet out of the AUX port on a 2600 router. I have a dial modem attached to it that does function, yet when I try to RT to it the connection is refused. Here is the config: line aux 0 modem InOut transport input all stopbits 1 speed 38400 flowcontrol hardware Someone suggested adding "no exec", but that had no effect. This exact config works just fine on any 2500 in our network, but I have yet to get RT working with a 2600 series router running 12.0 or 12.1. Any other ideas? Thanks, John _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ccnp guide errors
Where did you find the reviews of these books? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Brian Sent: Sunday, March 11, 2001 12:09 AM To: [EMAIL PROTECTED] Subject: ccnp guide errors I recently bought the Osborne version of the CCNP routing study guide. After catching a few errors in the first few chapters, I went online to look at reviews. It seems many others have noticed this also. More surprising, as I read the reviews for the other versions, including CiscoPress, ExamCram, and Todd Lammle, this seems to apply to all of them. What the hell is someone supposed to do to fill in the areas they are not familiar with? I am curious if you have an opinion as to which of these guides is the most error free?? Brian _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: About Point2Point Links and Bandwidth
Along the same line, point-to-point links can be configured for HDLC (default), PPP, other encapsulation. What are the benefits / reasons to configure one type of encap. versus the other? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Friday, March 09, 2001 4:21 AM To: '[EMAIL PROTECTED]' Subject: About Point2Point Links and Bandwidth Hello everyone. I have a question about layer 2 encap. for WAN Point-to-Point links (PPP, HDCLC, SDLC). Are all of them full-duplex? If the question is yes, does this mean that if I have an E1 connection (for instance) with a carrier I can say I have 2Mbps for inbound traffic and 2Mbps for outbound? Thanks in advance. Juanjo Romero. CCNA/DA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Serial port Full Duplex or Half duplex?
My understanding is that serial is full duplex. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kiran Kumar M Sent: Thursday, March 08, 2001 1:57 PM To: [EMAIL PROTECTED] Subject: Serial port Full Duplex or Half duplex? Hi, Can anyone tell me In cisco routers, serial interface with v.35 will work in Full Deuplex or Half Duplex? Thanks, Kiran _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IP Address Syntax
Is it CIDR or VLSM? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Larry Lamb Sent: Thursday, March 08, 2001 9:38 PM To: [EMAIL PROTECTED] Subject: Re: IP Address Syntax /24 is a CIDR notation. It means that 24 bits are masked leaving 8 bits for host addressing. In this case you'd have 192.35.3.0-255 with 0 being the NetID, 255 being the broadcast ID, and 1-254 being available for hosts. "Dennis" wrote in message 989jdk$ths$[EMAIL PROTECTED]... I would like to know what the " /24 " at the end of this ip address means... 192.35.3.240/24 tai _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IP Address Syntax
it means the ip address should be read in the context of a 24 bit subnet mask (255.255.255.0) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dennis Sent: Thursday, March 08, 2001 9:33 PM To: [EMAIL PROTECTED] Subject: IP Address Syntax I would like to know what the " /24 " at the end of this ip address means... 192.35.3.240/24 tai _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]