RE: line protocol down
Jason, it is OK not to understand something , and ask questions, but you have no clue, and expect others who are not getting paid to do YOUR job to do it for you. Why should we help you fix the problems YOU are getting paid to fix. Get some training, and study, help yourself. If you want my help the price is $100.00 per hour at a minimum. My .02 EF -Original Message- From: Yee, Jason [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 1:56 AM To: cisco@groupstudy. com (E-mail) Subject: line protocol down hi , I have problems with my frame-relay serial link attatched is the router configuration physical layer confirmed is ok as carrier is up but my serial interface still showing interface up line protocol down Any inputs will be greatly appreciated thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Edgar, Don't you see everybody here is trying to help? That's what the purpose of this group, not only people ask questions, but we all watch and learn from them. I think you own an apology to Jason. You can always ignore the messages if you do not like it and keep your mouth shut. ""Feliz, Edgar"" <[EMAIL PROTECTED]> wrote in message A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02...> Jason,> > it is OK not to understand something , and ask questions, but you have no> clue, and expect others who are not getting paid to do YOUR job to do it for> you. Why should we help you fix the problems YOU are getting paid to fix.> Get some training, and study, help yourself. If you want my help the price> is $100.00 per hour at a minimum.> > My .02> > EF > > -Original Message-> From: Yee, Jason [mailto:[EMAIL PROTECTED]]> Sent: Wednesday, September 13, 2000 1:56 AM> To: cisco@groupstudy. com (E-mail)> Subject: line protocol down> > > > hi , > > I have problems with my frame-relay serial link attatched is the router> configuration> > physical layer confirmed is ok as carrier is up but my serial interface> still showing interface up line protocol down> > Any inputs will be greatly appreciated> > > thanks> > Jason> > **NOTE: New CCNA/CCDA List has been formed. For more information go to> http://www.groupstudy.com/list/Associates.html> _> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html> FAQ, list archives, and subscription info: http://www.groupstudy.com> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]>
RE: line protocol down
I do not think I owe him an apology, and I have the right to speak my mind. Follow your own advice and ignore the message if you do not like it, and keep your trap shut. EF -Original Message- From: CNN [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 6:09 PM To: [EMAIL PROTECTED] Subject: Re: line protocol down Edgar, Don't you see everybody here is trying to help? That's what the purpose of this group, not only people ask questions, but we all watch and learn from them. I think you own an apology to Jason. You can always ignore the messages if you do not like it and keep your mouth shut. ""Feliz, Edgar"" < <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]> wrote in message <A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02> A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02... > Jason, > > it is OK not to understand something , and ask questions, but you have no > clue, and expect others who are not getting paid to do YOUR job to do it for > you. Why should we help you fix the problems YOU are getting paid to fix. > Get some training, and study, help yourself. If you want my help the price > is $100.00 per hour at a minimum. > > My .02 > > EF > > -Original Message- > From: Yee, Jason [ <mailto:[EMAIL PROTECTED]> mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 13, 2000 1:56 AM > To: cisco@groupstudy. com (E-mail) > Subject: line protocol down > > > > hi , > > I have problems with my frame-relay serial link attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > <http://www.groupstudy.com/list/Associates.html> http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: <http://www.groupstudy.com/list/guide.html> http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: <http://www.groupstudy.com> http://www.groupstudy.com > Report misconduct and Nondisclosure violations to <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down
hi all , With regard to my problem.I was troubleshooting this morning and the problem is still with their receive. I first disabled LMI and had him do the same on his router along with no keepalives. The PVC came back up from the perspective of the frame relay switch (with LMI enabled it was down). I send 100 packets to him, he doesn't receive them on the router PVC stats. I show the packets traversing our frame relay network with zero discards or errors. He sends me 100 packets, I show 100 packets coming into our network. any comments Jason -Original Message- From: Erick B. [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 2:47 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: line protocol down Hi, First of all, your serial interface has input errors and CRC errors. You have sent LMI but haven't received any LMI probably due to these input errors and CRC's. I would check the circuit and CSU config. Once you get the line issues sorted out, heres how to troubleshoot frame based on the output you gave. Your DLCI 659 is DELETED which is assigned to your sub interface. Note, it was active when the interface was first brought up for a short time. This is normal on Cisco routers. The DLCIs are marked as active when interface is first brought up until LMI is received or not. Do a 'show frame pvc' and see what DLCIs your learning from the provider's frame switch if you are. Your LMI type is ANSI, is this correct? You can do a 'debug frame lmi' to see LMI packets. LMI is the management protocol where your DLCIs are learned, status of them, etc. It has to match that of switch. In the debug output, you will get at least 2-3 lines for each LMI poll (plus one more for each PVC, DLCI). The PVC/DLCI lines in 'debug frame lmi' begin with PVC ... and in middle will have dlci ##. If you don't see PVC lines in debug output your not learning any DLCIs and theres a issue w/the configuration of the providers switch/frame mapping to you, LMI mis-match, or a line problem. You can switch the LMI-type see if anything changes as well (while your waiting for provider to callback). If debug frame lmi looks good, then do a 'show frame map' to see what inverse-arp is picking for remote address's since your not staticly mapping them with a frame map statement. What does 'show frame lmi' show for input/output (bottom 2 lines of output). HTH, Erick B. --- "Yee, Jason" <[EMAIL PROTECTED]> wrote: > > hi , > > I have problems with my frame-relay serial link > attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but > my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > > cncnepal.384.128.k2pop#sh run > Building configuration... > > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname cncnepal.384.128.k2pop > ! > ! > ip subnet-zero > ! > interface Ethernet0 > no ip address > ! > interface Serial0 > ip address 192.168.1.9 255.255.255.252 > no fair-queue > ! > interface Serial1 > no ip address > encapsulation frame-relay IETF > --More-- > frame-relay lmi-type ansi > ! > interface Serial1.1 point-to-point > ip address 202.161.128.158 255.255.255.252 > frame-relay interface-dlci 659 > ! > router bgp 64519 > network 202.51.65.0 > network 202.51.66.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 202.161.128.157 > ! > line con 0 > line 1 16 > line aux 0 > line vty 0 4 > password router > login > ! > end > > cncnepal.384.128.k2pop#sh int s1 > Serial1 is up, line protocol is down > Hardware is HD64570 > MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely > 168/255, load 1/255 > Encapsulation FRAME-RELAY IETF, loopback not set, > keepalive set (10 sec) > LMI enq sent 60, LMI stat recvd 0, LMI upd recvd > 0, DTE LMI down > LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 > LMI DLCI 0 LMI type is ANSI Annex D frame relay > DTE > Broadcast queue 0/64, broadcasts sent/dropped 1/0, > interface broadcasts 0 > Last input never, output 00:00:00, output hang > never > Last clearing of "show interface" counters never > Input queue: 0/75/0 (size/max/drops); Total output > drops: 0 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max > total/threshold/drops) > Conversations 0/1/256 (active/max active/max > total) > Reserved Conversations 0/0 (allocated/max > allocated) > 5 minute input rate 0 bits/sec, 0 packets
Re: line protocol down(???)
Jay, Are you sure it's not his configuration??? Your config looks ok...??? I know this was probably asked but is your line going out to a telco provider? If so it looks like this could be a routing issue. If he can get to you but you cant get to him then it looks like there's something wrong with his side, or blocking you somehow. Did this just all of a sudden happen out of nowhere or is this something that you just set up??? His DLCI mapping commands may be a little screwy...just a though, well...a couple ;) Mark Zabludovsky ~ CCNA, CCDA, 1/4-NP [EMAIL PROTECTED] "Destiny is not a matter of chance, it is a matter of choice; it is not a thing to be waited for, it is a thing to be achieved." ~William Jennings Bryan~ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down(???)
thanks for your reply , ok I will check the DLCI command . Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 14, 2000 11:36 AM To: Yee, Jason; [EMAIL PROTECTED] Subject: Re: line protocol down(???) Jay, Are you sure it's not his configuration??? Your config looks ok...??? I know this was probably asked but is your line going out to a telco provider? If so it looks like this could be a routing issue. If he can get to you but you cant get to him then it looks like there's something wrong with his side, or blocking you somehow. Did this just all of a sudden happen out of nowhere or is this something that you just set up??? His DLCI mapping commands may be a little screwy...just a though, well...a couple ;) Mark Zabludovsky ~ CCNA, CCDA, 1/4-NP [EMAIL PROTECTED] "Destiny is not a matter of chance, it is a matter of choice; it is not a thing to be waited for, it is a thing to be achieved." ~William Jennings Bryan~ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
I totally agree with you , thanks pal!! ""CNN"" <[EMAIL PROTECTED]> wrote in message 8pou25$fp1$[EMAIL PROTECTED]">news:8pou25$fp1$[EMAIL PROTECTED]... Edgar, Don't you see everybody here is trying to help? That's what the purpose of this group, not only people ask questions, but we all watch and learn from them. I think you own an apology to Jason. You can always ignore the messages if you do not like it and keep your mouth shut. ""Feliz, Edgar"" <[EMAIL PROTECTED]> wrote in message A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02...> Jason,> > it is OK not to understand something , and ask questions, but you have no> clue, and expect others who are not getting paid to do YOUR job to do it for> you. Why should we help you fix the problems YOU are getting paid to fix.> Get some training, and study, help yourself. If you want my help the price> is $100.00 per hour at a minimum.> > My .02> > EF > > -Original Message-> From: Yee, Jason [mailto:[EMAIL PROTECTED]]> Sent: Wednesday, September 13, 2000 1:56 AM> To: cisco@groupstudy. com (E-mail)> Subject: line protocol down> > > > hi , > > I have problems with my frame-relay serial link attatched is the router> configuration> > physical layer confirmed is ok as carrier is up but my serial interface> still showing interface up line protocol down> > Any inputs will be greatly appreciated> > > thanks> > Jason> > **NOTE: New CCNA/CCDA List has been formed. For more information go to> http://www.groupstudy.com/list/Associates.html> _> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html> FAQ, list archives, and subscription info: http://www.groupstudy.com> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]>
Re: line protocol down
What a cool guy! ""Feliz, Edgar"" <[EMAIL PROTECTED]> wrote in message A1951EBFDB75D31188E200805F6FEE71B7FB26@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FB26@SNYC1NT02... > I do not think I owe him an apology, and I have the right to speak my mind. > Follow your own advice and ignore the message if you do not like it, and > keep your trap shut. > > EF > > -Original Message- > From: CNN [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 13, 2000 6:09 PM > To: [EMAIL PROTECTED] > Subject: Re: line protocol down > > > Edgar, > > Don't you see everybody here is trying to help? That's what the purpose of > this group, not only people ask questions, but we all watch and learn from > them. > > I think you own an apology to Jason. You can always ignore the messages if > you do not like it and keep your mouth shut. > > > > ""Feliz, Edgar"" < <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]> > wrote in message <A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02> > A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02... > > Jason, > > > > it is OK not to understand something , and ask questions, but you have no > > clue, and expect others who are not getting paid to do YOUR job to do it > for > > you. Why should we help you fix the problems YOU are getting paid to fix. > > Get some training, and study, help yourself. If you want my help the price > > is $100.00 per hour at a minimum. > > > > My .02 > > > > EF > > > > -Original Message- > > From: Yee, Jason [ <mailto:[EMAIL PROTECTED]> mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, September 13, 2000 1:56 AM > > To: cisco@groupstudy. com (E-mail) > > Subject: line protocol down > > > > > > > > hi , > > > > I have problems with my frame-relay serial link attatched is the router > > configuration > > > > physical layer confirmed is ok as carrier is up but my serial interface > > still showing interface up line protocol down > > > > Any inputs will be greatly appreciated > > > > > > thanks > > > > Jason > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > <http://www.groupstudy.com/list/Associates.html> > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: <http://www.groupstudy.com/list/guide.html> > http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: <http://www.groupstudy.com> > http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to > <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Plenty of ego being thrown around this list lately Richard A. Holland Voice/Data Integrator Telec, Inc. http://www.telecinc.com CCDA,CCNP,MCSE,CSE -Original Message- From: Templecombe <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Thursday, September 14, 2000 8:18 PM Subject: Re: line protocol down >What a cool guy! > >""Feliz, Edgar"" <[EMAIL PROTECTED]> wrote in message >A1951EBFDB75D31188E200805F6FEE71B7FB26@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FB26@SNYC1NT02... >> I do not think I owe him an apology, and I have the right to speak my >mind. >> Follow your own advice and ignore the message if you do not like it, and >> keep your trap shut. >> >> EF >> >> -Original Message- >> From: CNN [mailto:[EMAIL PROTECTED]] >> Sent: Wednesday, September 13, 2000 6:09 PM >> To: [EMAIL PROTECTED] >> Subject: Re: line protocol down >> >> >> Edgar, >> >> Don't you see everybody here is trying to help? That's what the purpose of >> this group, not only people ask questions, but we all watch and learn from >> them. >> >> I think you own an apology to Jason. You can always ignore the messages if >> you do not like it and keep your mouth shut. >> >> >> >> ""Feliz, Edgar"" < <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]> >> wrote in message <A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02> >> A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02... >> > Jason, >> > >> > it is OK not to understand something , and ask questions, but you have >no >> > clue, and expect others who are not getting paid to do YOUR job to do it >> for >> > you. Why should we help you fix the problems YOU are getting paid to >fix. >> > Get some training, and study, help yourself. If you want my help the >price >> > is $100.00 per hour at a minimum. >> > >> > My .02 >> > >> > EF >> > >> > -Original Message- >> > From: Yee, Jason [ <mailto:[EMAIL PROTECTED]> >mailto:[EMAIL PROTECTED]] >> > Sent: Wednesday, September 13, 2000 1:56 AM >> > To: cisco@groupstudy. com (E-mail) >> > Subject: line protocol down >> > >> > >> > >> > hi , >> > >> > I have problems with my frame-relay serial link attatched is the router >> > configuration >> > >> > physical layer confirmed is ok as carrier is up but my serial interface >> > still showing interface up line protocol down >> > >> > Any inputs will be greatly appreciated >> > >> > >> > thanks >> > >> > Jason >> > >> > **NOTE: New CCNA/CCDA List has been formed. For more information go to >> > <http://www.groupstudy.com/list/Associates.html> >> http://www.groupstudy.com/list/Associates.html >> > _ >> > UPDATED Posting Guidelines: <http://www.groupstudy.com/list/guide.html> >> http://www.groupstudy.com/list/guide.html >> > FAQ, list archives, and subscription info: <http://www.groupstudy.com> >> http://www.groupstudy.com >> > Report misconduct and Nondisclosure violations to >> <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] >> > >> >> **NOTE: New CCNA/CCDA List has been formed. For more information go to >> http://www.groupstudy.com/list/Associates.html >> _ >> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >> FAQ, list archives, and subscription info: http://www.groupstudy.com >> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >> > > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down
I think turfing your mail before its delivered is a better option. Thats my usual fix for cowards and primadonnas. Thanks for reminding me why I do that. Keep your trap shut...you are a brave little fellow. You are also in the wrong place. Darth -Original Message- From: Feliz, Edgar [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 3:41 PM To: CNN; [EMAIL PROTECTED] Subject: RE: line protocol down I do not think I owe him an apology, and I have the right to speak my mind. Follow your own advice and ignore the message if you do not like it, and keep your trap shut. EF -Original Message- From: CNN [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 6:09 PM To: [EMAIL PROTECTED] Subject: Re: line protocol down Edgar, Don't you see everybody here is trying to help? That's what the purpose of this group, not only people ask questions, but we all watch and learn from them. I think you own an apology to Jason. You can always ignore the messages if you do not like it and keep your mouth shut. ""Feliz, Edgar"" < <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]> wrote in message <A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02> A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02... > Jason, > > it is OK not to understand something , and ask questions, but you have no > clue, and expect others who are not getting paid to do YOUR job to do it for > you. Why should we help you fix the problems YOU are getting paid to fix. > Get some training, and study, help yourself. If you want my help the price > is $100.00 per hour at a minimum. > > My .02 > > EF > > -Original Message- > From: Yee, Jason [ <mailto:[EMAIL PROTECTED]> mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 13, 2000 1:56 AM > To: cisco@groupstudy. com (E-mail) > Subject: line protocol down > > > > hi , > > I have problems with my frame-relay serial link attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > <http://www.groupstudy.com/list/Associates.html> http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: <http://www.groupstudy.com/list/guide.html> http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: <http://www.groupstudy.com> http://www.groupstudy.com > Report misconduct and Nondisclosure violations to <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
What the hell is turfing? Maybe I am stupid but I have never heard this term before. I am a firm believer in everyone having the right to say whatever he or she pleases. One cannot please everyone and anything someone says that is slightly controversial is bound to offend a bunch of people on this list. Too bad is what I say. If you don't like what someone has to say waaah waaah tough crap. John - Original Message - From: Traister, Blake (SBCI) <[EMAIL PROTECTED]> To: 'Feliz, Edgar' <[EMAIL PROTECTED]>; CNN <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Friday, September 15, 2000 4:45 PM Subject: RE: line protocol down > I think turfing your mail before its delivered is a better option. Thats my > usual fix for cowards and primadonnas. Thanks for reminding me why I do > that. Keep your trap shut...you are a brave little fellow. You are also in > the wrong place. > > Darth > > -Original Message- > From: Feliz, Edgar [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 13, 2000 3:41 PM > To: CNN; [EMAIL PROTECTED] > Subject: RE: line protocol down > > > I do not think I owe him an apology, and I have the right to speak my mind. > Follow your own advice and ignore the message if you do not like it, and > keep your trap shut. > > EF > > -Original Message- > From: CNN [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 13, 2000 6:09 PM > To: [EMAIL PROTECTED] > Subject: Re: line protocol down > > > Edgar, > > Don't you see everybody here is trying to help? That's what the purpose of > this group, not only people ask questions, but we all watch and learn from > them. > > I think you own an apology to Jason. You can always ignore the messages if > you do not like it and keep your mouth shut. > > > > ""Feliz, Edgar"" < <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]> > wrote in message <A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02> > A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02">news:A1951EBFDB75D31188E200805F6FEE71B7FACF@SNYC1NT02... > > Jason, > > > > it is OK not to understand something , and ask questions, but you have no > > clue, and expect others who are not getting paid to do YOUR job to do it > for > > you. Why should we help you fix the problems YOU are getting paid to fix. > > Get some training, and study, help yourself. If you want my help the price > > is $100.00 per hour at a minimum. > > > > My .02 > > > > EF > > > > -Original Message- > > From: Yee, Jason [ <mailto:[EMAIL PROTECTED]> mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, September 13, 2000 1:56 AM > > To: cisco@groupstudy. com (E-mail) > > Subject: line protocol down > > > > > > > > hi , > > > > I have problems with my frame-relay serial link attatched is the router > > configuration > > > > physical layer confirmed is ok as carrier is up but my serial interface > > still showing interface up line protocol down > > > > Any inputs will be greatly appreciated > > > > > > thanks > > > > Jason > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > <http://www.groupstudy.com/list/Associates.html> > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: <http://www.groupstudy.com/list/guide.html> > http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: <http://www.groupstudy.com> > http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to > <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Is this happening in times of heavy usage? What have you figured out so far? Brian On Mon, 16 Oct 2000, Rayappa Mayakunthala wrote: > I have this problem with my 2503. The line protocol goes down consistently. > If I reset the modem (CSU/DSU) or reload the router, the line protocol comes > up. And then it goes down after few minutes/hours and history repeats. I > couldn't nail down the problem. Any clues? > > Thanks, > Rayappa. > > > The information transmitted is intended only for the person or entity to which > it is addressed and may contain confidential and/or privileged material. > Any review, retransmission, dissemination or other use of, or taking of any > action in reliance upon, this information by persons or entities other than the >intended recipient is prohibited. > If you received this in error, please contact the sender and delete the materialfrom >any computer. > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Hi, I believe keepalive is on, if it is turn if off ( say no keepalive ) & also send the show command output of flapping interface. Thanks Rahul. - Original Message - From: "Rayappa Mayakunthala" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 16, 2000 11:18 AM Subject: line protocol down > I have this problem with my 2503. The line protocol goes down consistently. > If I reset the modem (CSU/DSU) or reload the router, the line protocol comes > up. And then it goes down after few minutes/hours and history repeats. I > couldn't nail down the problem. Any clues? > > Thanks, > Rayappa. > > -- -- > The information transmitted is intended only for the person or entity to which > it is addressed and may contain confidential and/or privileged material. > Any review, retransmission, dissemination or other use of, or taking of any > action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. > If you received this in error, please contact the sender and delete the materialfrom any computer. > -- -- > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down
Also, check how much memory you have in the router. Jon Jon Kuhn IGNYTE Technology, Inc. 3226 scott boulevard santa clara, california 95054 phone 408.350.2600 ext. 335 fax 408.350.2601 [EMAIL PROTECTED] www.ignyte.com -Original Message- From: Rahul Kachalia [mailto:[EMAIL PROTECTED]] Sent: Monday, October 16, 2000 4:04 PM To: Rayappa Mayakunthala; [EMAIL PROTECTED] Subject:Re: line protocol down Hi, I believe keepalive is on, if it is turn if off ( say no keepalive ) & also send the show command output of flapping interface. Thanks Rahul. - Original Message - From: "Rayappa Mayakunthala" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 16, 2000 11:18 AM Subject: line protocol down > I have this problem with my 2503. The line protocol goes down consistently. > If I reset the modem (CSU/DSU) or reload the router, the line protocol comes > up. And then it goes down after few minutes/hours and history repeats. I > couldn't nail down the problem. Any clues? > > Thanks, > Rayappa. > > -- -- > The information transmitted is intended only for the person or entity to which > it is addressed and may contain confidential and/or privileged material. > Any review, retransmission, dissemination or other use of, or taking of any > action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. > If you received this in error, please contact the sender and delete the materialfrom any computer. > -- -- > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down
Seems to be problem with Clocking .Checking the clock settings on Modem (internal or external Clock) may help to solve the problem . Regards Anand Sudula -Original Message- From: Jon Kuhn [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 17, 2000 4:50 AM To: 'Rahul Kachalia'; Rayappa Mayakunthala; [EMAIL PROTECTED] Subject: RE: line protocol down Also, check how much memory you have in the router. Jon Jon Kuhn IGNYTE Technology, Inc. 3226 scott boulevard santa clara, california 95054 phone 408.350.2600 ext. 335 fax 408.350.2601 [EMAIL PROTECTED] www.ignyte.com -Original Message- From: Rahul Kachalia [mailto:[EMAIL PROTECTED]] Sent: Monday, October 16, 2000 4:04 PM To: Rayappa Mayakunthala; [EMAIL PROTECTED] Subject: Re: line protocol down Hi, I believe keepalive is on, if it is turn if off ( say no keepalive ) & also send the show command output of flapping interface. Thanks Rahul. - Original Message - From: "Rayappa Mayakunthala" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 16, 2000 11:18 AM Subject: line protocol down > I have this problem with my 2503. The line protocol goes down consistently. > If I reset the modem (CSU/DSU) or reload the router, the line protocol comes > up. And then it goes down after few minutes/hours and history repeats. I > couldn't nail down the problem. Any clues? > > Thanks, > Rayappa. > > -- -- > The information transmitted is intended only for the person or entity to which > it is addressed and may contain confidential and/or privileged material. > Any review, retransmission, dissemination or other use of, or taking of any > action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. > If you received this in error, please contact the sender and delete the materialfrom any computer. > -- -- > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
I faced this problem in my router and can't get solution for that. - Original Message - From: Anand Sudula <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 17, 2000 9:49 AM Subject: RE: line protocol down > Seems to be problem with Clocking .Checking the clock settings on Modem > (internal or external Clock) may help to solve the problem . > Regards > Anand Sudula > > -Original Message- > From: Jon Kuhn [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, October 17, 2000 4:50 AM > To: 'Rahul Kachalia'; Rayappa Mayakunthala; [EMAIL PROTECTED] > Subject: RE: line protocol down > > Also, check how much memory you have in the router. > > Jon > > > > > > Jon Kuhn > IGNYTE Technology, Inc. > 3226 scott boulevard > santa clara, california 95054 > phone 408.350.2600 ext. 335 > fax 408.350.2601 > [EMAIL PROTECTED] > www.ignyte.com > > -Original Message- > From: Rahul Kachalia [mailto:[EMAIL PROTECTED]] > Sent: Monday, October 16, 2000 4:04 PM > To: Rayappa Mayakunthala; [EMAIL PROTECTED] > Subject: Re: line protocol down > > Hi, > > I believe keepalive is on, if it is turn if off ( say no keepalive ) & > also send the show command output of flapping interface. > > Thanks > Rahul. > > - Original Message - > From: "Rayappa Mayakunthala" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, October 16, 2000 11:18 AM > Subject: line protocol down > > > > I have this problem with my 2503. The line protocol goes down > consistently. > > If I reset the modem (CSU/DSU) or reload the router, the line protocol > comes > > up. And then it goes down after few minutes/hours and history repeats. I > > couldn't nail down the problem. Any clues? > > > > Thanks, > > Rayappa. > > > > -- > -- > > The information transmitted is intended only for the person or entity to > which > > it is addressed and may contain confidential and/or privileged material. > > Any review, retransmission, dissemination or other use of, or taking of > any > > action in reliance upon, this information by persons or entities other > than the intended recipient is prohibited. > > If you received this in error, please contact the sender and delete the > materialfrom any computer. > > -- > -- > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Not many clues given though but from what you say it seems logical that you should check the status of your serial interface see if there are many input errors or crc errors if there are check the clock rate of your modem otherwise check the status of the other party that you are connected to to see if they were down however you can also confirm that your interface port is ok but putting keepalives equal to 0 to see that the status is up up suaveguru --- Rayappa Mayakunthala <[EMAIL PROTECTED]> wrote: > I have this problem with my 2503. The line protocol > goes down consistently. > If I reset the modem (CSU/DSU) or reload the router, > the line protocol comes > up. And then it goes down after few minutes/hours > and history repeats. I > couldn't nail down the problem. Any clues? > > Thanks, > Rayappa. > > > The information transmitted is intended only for the > person or entity to which > it is addressed and may contain confidential and/or > privileged material. > Any review, retransmission, dissemination or other > use of, or taking of any > action in reliance upon, this information by persons > or entities other than the intended recipient is > prohibited. > If you received this in error, please contact the > sender and delete the materialfrom any computer. > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down
Which make of csu/dsu(modem) u r using for this ?? most of the times the line protocol will not come up due to clocking problem on the modem or tooo many errors on the line ... I had this problem when connecting two of our offices with 2 wire modem(RAD Make) . and we found there are lots of errors on line provided by local telco . It was fixed by telco by using different pairs then line protocol came up . so I suggest u first check the line ( test with Bert Tester)and then modem settings . Hope this helps Anand Sudula Systems Administrator NT/Exchange IT Department Baan Info Systems India Pvt. Ltd. Tel. +91 (0)40-3607299 Extn:1509 Fax.+91(0)40-3607366 E-mail: [EMAIL PROTECTED] -Original Message- From: jason yee [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 19, 2000 2:27 AM To: Rayappa Mayakunthala; '[EMAIL PROTECTED]' Subject: Re: line protocol down Not many clues given though but from what you say it seems logical that you should check the status of your serial interface see if there are many input errors or crc errors if there are check the clock rate of your modem otherwise check the status of the other party that you are connected to to see if they were down however you can also confirm that your interface port is ok but putting keepalives equal to 0 to see that the status is up up suaveguru --- Rayappa Mayakunthala <[EMAIL PROTECTED]> wrote: > I have this problem with my 2503. The line protocol > goes down consistently. > If I reset the modem (CSU/DSU) or reload the router, > the line protocol comes > up. And then it goes down after few minutes/hours > and history repeats. I > couldn't nail down the problem. Any clues? > > Thanks, > Rayappa. > > > The information transmitted is intended only for the > person or entity to which > it is addressed and may contain confidential and/or > privileged material. > Any review, retransmission, dissemination or other > use of, or taking of any > action in reliance upon, this information by persons > or entities other than the intended recipient is > prohibited. > If you received this in error, please contact the > sender and delete the materialfrom any computer. > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
is this frame-relay? and is this a new connection? - Original Message - From: "Anand Sudula" <[EMAIL PROTECTED]> To: "Rayappa Mayakunthala" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, October 19, 2000 12:42 AM Subject: RE: line protocol down > Which make of csu/dsu(modem) u r using for this ?? most of the times the > line protocol will not come up due to clocking problem on the modem or tooo > many errors on the line ... I had this problem when connecting two of our > offices with 2 wire modem(RAD Make) . and we found there are lots of errors > on line provided by local telco . It was fixed by telco by using different > pairs then line protocol came up . so I suggest u first check the line ( > test with Bert Tester)and then modem settings . > Hope this helps > Anand Sudula > Systems Administrator NT/Exchange > IT Department > Baan Info Systems India Pvt. Ltd. > Tel. +91 (0)40-3607299 Extn:1509 > Fax.+91(0)40-3607366 > E-mail: [EMAIL PROTECTED] > > -Original Message- > From: jason yee [mailto:[EMAIL PROTECTED]] > Sent: Thursday, October 19, 2000 2:27 AM > To: Rayappa Mayakunthala; '[EMAIL PROTECTED]' > Subject: Re: line protocol down > > Not many clues given though > > but from what you say it seems logical that you should > check the status of your serial interface see if there > are many input errors or crc errors if there are check > the clock rate of your modem > > otherwise check the status of the other party that you > are connected to to see if they were down > > however you can also confirm that your interface port > is ok but putting keepalives equal to 0 to see that > the status is up up > > suaveguru > --- Rayappa Mayakunthala <[EMAIL PROTECTED]> > wrote: > > I have this problem with my 2503. The line protocol > > goes down consistently. > > If I reset the modem (CSU/DSU) or reload the router, > > the line protocol comes > > up. And then it goes down after few minutes/hours > > and history repeats. I > > couldn't nail down the problem. Any clues? > > > > Thanks, > > Rayappa. > > > > > -- -- > > > The information transmitted is intended only for the > > person or entity to which > > it is addressed and may contain confidential and/or > > privileged material. > > Any review, retransmission, dissemination or other > > use of, or taking of any > > action in reliance upon, this information by persons > > or entities other than the intended recipient is > > prohibited. > > If you received this in error, please contact the > > sender and delete the materialfrom any computer. > > > -- -- > > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > __ > Do You Yahoo!? > Yahoo! Messenger - Talk while you surf! It's FREE. > http://im.yahoo.com/ > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
One of the things your carrier may require is the type after your DLCI number. Contact your carrier and they will tell you what it should be. Do you have external CSU's or using internal on the router? For example: interface Serial1.1 point-to-point frame-relay interface-dlci 659 IETF Your bgp config isn't going to work either. It's missing a few lines. Are you planning on running BGP? If so, let me know and we can work on that problem next. John - Original Message - From: Yee, Jason <[EMAIL PROTECTED]> To: cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]> Sent: Tuesday, September 12, 2000 10:55 PM Subject: line protocol down > > hi , > > I have problems with my frame-relay serial link attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Hi, First of all, your serial interface has input errors and CRC errors. You have sent LMI but haven't received any LMI probably due to these input errors and CRC's. I would check the circuit and CSU config. Once you get the line issues sorted out, heres how to troubleshoot frame based on the output you gave. Your DLCI 659 is DELETED which is assigned to your sub interface. Note, it was active when the interface was first brought up for a short time. This is normal on Cisco routers. The DLCIs are marked as active when interface is first brought up until LMI is received or not. Do a 'show frame pvc' and see what DLCIs your learning from the provider's frame switch if you are. Your LMI type is ANSI, is this correct? You can do a 'debug frame lmi' to see LMI packets. LMI is the management protocol where your DLCIs are learned, status of them, etc. It has to match that of switch. In the debug output, you will get at least 2-3 lines for each LMI poll (plus one more for each PVC, DLCI). The PVC/DLCI lines in 'debug frame lmi' begin with PVC ... and in middle will have dlci ##. If you don't see PVC lines in debug output your not learning any DLCIs and theres a issue w/the configuration of the providers switch/frame mapping to you, LMI mis-match, or a line problem. You can switch the LMI-type see if anything changes as well (while your waiting for provider to callback). If debug frame lmi looks good, then do a 'show frame map' to see what inverse-arp is picking for remote address's since your not staticly mapping them with a frame map statement. What does 'show frame lmi' show for input/output (bottom 2 lines of output). HTH, Erick B. --- "Yee, Jason" <[EMAIL PROTECTED]> wrote: > > hi , > > I have problems with my frame-relay serial link > attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but > my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > > cncnepal.384.128.k2pop#sh run > Building configuration... > > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname cncnepal.384.128.k2pop > ! > ! > ip subnet-zero > ! > interface Ethernet0 > no ip address > ! > interface Serial0 > ip address 192.168.1.9 255.255.255.252 > no fair-queue > ! > interface Serial1 > no ip address > encapsulation frame-relay IETF > --More-- > frame-relay lmi-type ansi > ! > interface Serial1.1 point-to-point > ip address 202.161.128.158 255.255.255.252 > frame-relay interface-dlci 659 > ! > router bgp 64519 > network 202.51.65.0 > network 202.51.66.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 202.161.128.157 > ! > line con 0 > line 1 16 > line aux 0 > line vty 0 4 > password router > login > ! > end > > cncnepal.384.128.k2pop#sh int s1 > Serial1 is up, line protocol is down > Hardware is HD64570 > MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely > 168/255, load 1/255 > Encapsulation FRAME-RELAY IETF, loopback not set, > keepalive set (10 sec) > LMI enq sent 60, LMI stat recvd 0, LMI upd recvd > 0, DTE LMI down > LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 > LMI DLCI 0 LMI type is ANSI Annex D frame relay > DTE > Broadcast queue 0/64, broadcasts sent/dropped 1/0, > interface broadcasts 0 > Last input never, output 00:00:00, output hang > never > Last clearing of "show interface" counters never > Input queue: 0/75/0 (size/max/drops); Total output > drops: 0 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max > total/threshold/drops) > Conversations 0/1/256 (active/max active/max > total) > Reserved Conversations 0/0 (allocated/max > allocated) > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 0 packets input, 0 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 > throttles > 12363 input errors, 38 CRC, 0 frame, 36 > overrun, 739 ignored, 38 abort > 62 packets output, 1162 bytes, 0 underruns > 0 output errors, 0 collisions, 21 interface > resets > 0 output buffer failures, 0 output buffers > swapped out > --More-- > 0 carrier transitions > DCD=up DSR=up DTR=up RTS=up CTS=up > cncnepal.384.128.k2pop#sh log > Syslog logging: enabled (0 messages dropped, 0 > flushes, 0 overruns) > Console logging: level debugging, 13 messages > logged > Monitor logging: level debugging, 0 messages > logged > Trap logging: level informational, 17 message > lines logged > Buffer logging: level debugging, 13 messages > logged > --More-- > Log Buffer (4096 bytes): > > %LINK-3-UPDOWN: Interface Ethernet0, changed state > to up > %LINK-3-UPDOWN: Interface Serial0, changed state to > down > %LINK-3-UPDOWN: Interface Serial1, changed state to > up > %LINEPROTO-5-UPDOWN: Line protocol on Interface > Ethernet0, c
Re: line protocol down
I would also suggest clearing the counters. Often times when new circuits are brought up there is a burst of errors. John Good comments btw Erick. - Original Message - From: Erick B. <[EMAIL PROTECTED]> To: Yee, Jason <[EMAIL PROTECTED]>; cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]> Sent: Tuesday, September 12, 2000 11:46 PM Subject: Re: line protocol down > Hi, > > First of all, your serial interface has input errors > and CRC errors. You have sent LMI but haven't received > any LMI probably due to these input errors and CRC's. > I would check the circuit and CSU config. > > Once you get the line issues sorted out, heres how to > troubleshoot frame based on the output you gave. > > Your DLCI 659 is DELETED which is assigned to your sub > interface. Note, it was active when the interface was > first brought up for a short time. This is normal on > Cisco routers. The DLCIs are marked as active when > interface is first brought up until LMI is received or > not. > > Do a 'show frame pvc' and see what DLCIs your learning > from the provider's frame switch if you are. Your LMI > type is ANSI, is this correct? You can do a 'debug > frame lmi' to see LMI packets. LMI is the management > protocol where your DLCIs are learned, status of them, > etc. It has to match that of switch. > > In the debug output, you will get at least 2-3 lines > for each LMI poll (plus one more for each PVC, DLCI). > The PVC/DLCI lines in 'debug frame lmi' begin with PVC > ... and in middle will have dlci ##. If you don't see > PVC lines in debug output your not learning any DLCIs > and theres a issue w/the configuration of the > providers switch/frame mapping to you, LMI mis-match, > or a line problem. You can switch the LMI-type see if > anything changes as well (while your waiting for > provider to callback). > > If debug frame lmi looks good, then do a 'show frame > map' to see what inverse-arp is picking for remote > address's since your not staticly mapping them with a > frame map statement. > > What does 'show frame lmi' show for input/output > (bottom 2 lines of output). > > HTH, Erick B. > > --- "Yee, Jason" <[EMAIL PROTECTED]> wrote: > > > > hi , > > > > I have problems with my frame-relay serial link > > attatched is the router > > configuration > > > > physical layer confirmed is ok as carrier is up but > > my serial interface > > still showing interface up line protocol down > > > > Any inputs will be greatly appreciated > > > > > > thanks > > > > Jason > > > > > cncnepal.384.128.k2pop#sh run > > Building configuration... > > > > Current configuration: > > ! > > version 11.2 > > no service password-encryption > > no service udp-small-servers > > no service tcp-small-servers > > ! > > hostname cncnepal.384.128.k2pop > > ! > > ! > > ip subnet-zero > > ! > > interface Ethernet0 > > no ip address > > ! > > interface Serial0 > > ip address 192.168.1.9 255.255.255.252 > > no fair-queue > > ! > > interface Serial1 > > no ip address > > encapsulation frame-relay IETF > > --More-- > > frame-relay lmi-type ansi > > ! > > interface Serial1.1 point-to-point > > ip address 202.161.128.158 255.255.255.252 > > frame-relay interface-dlci 659 > > ! > > router bgp 64519 > > network 202.51.65.0 > > network 202.51.66.0 > > ! > > ip classless > > ip route 0.0.0.0 0.0.0.0 202.161.128.157 > > ! > > line con 0 > > line 1 16 > > line aux 0 > > line vty 0 4 > > password router > > login > > ! > > end > > > > cncnepal.384.128.k2pop#sh int s1 > > Serial1 is up, line protocol is down > > Hardware is HD64570 > > MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely > > 168/255, load 1/255 > > Encapsulation FRAME-RELAY IETF, loopback not set, > > keepalive set (10 sec) > > LMI enq sent 60, LMI stat recvd 0, LMI upd recvd > > 0, DTE LMI down > > LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 > > LMI DLCI 0 LMI type is ANSI Annex D frame relay > > DTE > > Broadcast queue 0/64, broadcasts sent/dropped 1/0, > > interface broadcasts 0 > > Last input never, output 00:00:00, output hang > > never > > Last clearing of "show interface" counters never > > Input queue: 0/75/0 (size/max/drops); Total output > > drops: 0 > > Queueing strategy: we
RE: line protocol down
Well, I took a real quick glance but here are a few questions for you that may help you out: 1) Why have you selected the IETF encapuslation type? Are you dealing with Cisco and some other vendor? 2) As far as the Up-Down situation, have you verified the source of network clocking? What type of router-csu/dsu combination is in place? I would check the source of clocking again verify whether or not there is an issue with the settings on your csu/dsu. > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Yee, Jason > Sent: Wednesday, September 13, 2000 12:56 AM > To: cisco@groupstudy. com (E-mail) > Subject: line protocol down > > > > hi , > > I have problems with my frame-relay serial link attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: line protocol down
Are you using a frame relay simulator, or is this a connection to the telco? If this is a frame lab you have at home post the config of the router at the other end of this link. The details of the frame switch would be helpful too. >From: "Yee, Jason" <[EMAIL PROTECTED]> >Reply-To: "Yee, Jason" <[EMAIL PROTECTED]> >To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> >Subject: line protocol down >Date: Wed, 13 Sep 2000 00:55:57 -0500 > > >hi , > >I have problems with my frame-relay serial link attatched is the router >configuration > >physical layer confirmed is ok as carrier is up but my serial interface >still showing interface up line protocol down > >Any inputs will be greatly appreciated > > >thanks > >Jason > ><< routerconf.txt >> _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Line Protocol Down Status
Sadguna Kumar Dasari wrote in message news:... > Hi Folks: > > This is self-study lab kind of deal. I have an AGS+ router with 6 serial > ports and three 2500 series routers. I connected Serial 0 int on each of > these 2500 routers to Serial 2, 3, and 4 of AGS+. DCE in each case is on > AGS. Clock rate set. The Interface is up on all these interfaces but line > protocol is down. It is pretty simple config as I am just setting this up. I > can't figure out what the problem is. > > As a general question what causes the Interface to up and the line protocol > to be down. I tried to ping the ip number given to these interfaces from the > same router and I didn't get any response back. Is this because the line > protocol is down. In the int config mode of these interfaces I added > loopback command and pinged the int again but no answer. What could be the > problem? > > Unfortunately, I don't exactly remember which serial int on AGS connects to > which Serial 0 on which 2500 routers. But since it is straight forward > connection, I switched the ip numbers on the interfaces around to see where > the connection would be made. For example i configure s0 on the r1 (first > 2500 rourter) with 192.1.3.1/24 and try 192.1.3.2/24 on s2, s3, and s4 > respectively on AGS+. But none of them would work. All 2500 runnig 11.3(x) > version of IOS and AGS is 11.0(22). Encapsulation on both ends is the > default hdlc. > > I attached the command output as a seperate txt file. Can some body help me > figure out the problem? Any help is appreciated. > > Cheers > Kumar Dasari > > > > > > > > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
