Re: Re:3600 Flash
Download an older and smaller version via xmodem. Then, when that's up you
can tftp the larger version and it won't take as long.
ramius
""Thomas Schaffner"" <[EMAIL PROTECTED]> wrote in message
968eou$jq0$[EMAIL PROTECTED]">news:968eou$jq0$[EMAIL PROTECTED]...
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c
> /fcprt2/fcimages.htm#xtocid1196637
>
> Takes hours...
>
> Thomas
>
> ""CCNA"" <[EMAIL PROTECTED]> wrote in message
> 01c094b4$4f483410$0101a8c0@Ejaz1">news:01c094b4$4f483410$0101a8c0@Ejaz1...
> > Thanks but how to download IOS to the new Flash via your console port =
> > (or any other way) from rommode.>???
> >
> > =20
> > "hmt" <[EMAIL PROTECTED]> wrote in message =
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > When you remove the old flash, there goes your IOS. For some reason =
> > the=20
> > > "rom" IOS doesn't allow you to download images via tftp from rom mode.
=
> > You=20
> > > will need to download IOS to the new Flash via your console port
from=20
> > > rommode.
> > > One way to get around is if you have a flash card (not SIMMS), copy an
=
> > IOS=20
> > > image in there before you replace the SIMMS.
> > >=20
> > > [EMAIL PROTECTED] ("CCNA") wrote in
> > > <001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:=20
> > >=20
> > > >Hi All,
> > > >I need some help.I am replacing the flash memory of my 3620
> > > >router=20
> > > >from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
> > > >inserted the new Flash SIMMs
> > > >(They are blank).After I inserted the Flash SIMMs the router's =
> > "syetem"
> > > >LED started blinking constantly. I have also replaced the DRAMs =
> > from
> > > >24 MB to 64 (16x4) but they are fine.
> > > >Following is the error message
> > > >
> > > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE =
> > SOFTWARE
> > > >(fc1)
> > > >Copyright (c) 1999 by cisco Systems, Inc.
> > > >C3600 processor with 65536 Kbytes of main memory
> > > >Main memory is configured to 64 bit mode with parity disabled
> > > >
> > > >loadprog: error - Invalid image for platform
> > > >e_machine =3D 43, cpu_type =3D 30
> > > >boot: cannot load "flash:"
> > > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
> > > >SOFTWARE (fc1)
> > > >.
> > > >.
> > > >romon1>.
> > > >
> > > >What I want to ask is is it possible that we can insert a brand new
> > > >flash in the router and install the new IOS in it provided there is =
> > no
> > > >flash Memory in it on other slots or I can only upgrade not replace
=
> > the
> > > >flash SIMMs with the new ones???
> > > >
> > > >What should I do to make it work ?? I have a 3640 router also.Can it
=
> > be
> > > >of my help in any way ? How can I insert the new flash of 16MB in
> > > >3640 which has 8 MB SIMM and copy the IOS in it and place it back to
> > > >3620 ?? Partition like thing ..
> > > >Please giude me.
> > > >
> > > >Thanks to All
> > > >
> > > >
> > > >_
> > > >FAQ, list archives, and subscription info:
> > > >http://www.groupstudy.com/list/cisco.html Report misconduct and
> > > >Nondisclosure violations to [EMAIL PROTECTED]=20
> > > >
> > > >
> > >=20
> > > _
> > > FAQ, list archives, and subscription info: =
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >=20
> >
> > _
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Re:3600 Flash
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c
/fcprt2/fcimages.htm#xtocid1196637
Takes hours...
Thomas
""CCNA"" <[EMAIL PROTECTED]> wrote in message
01c094b4$4f483410$0101a8c0@Ejaz1">news:01c094b4$4f483410$0101a8c0@Ejaz1...
> Thanks but how to download IOS to the new Flash via your console port =
> (or any other way) from rommode.>???
>
> =20
> "hmt" <[EMAIL PROTECTED]> wrote in message =
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > When you remove the old flash, there goes your IOS. For some reason =
> the=20
> > "rom" IOS doesn't allow you to download images via tftp from rom mode. =
> You=20
> > will need to download IOS to the new Flash via your console port from=20
> > rommode.
> > One way to get around is if you have a flash card (not SIMMS), copy an =
> IOS=20
> > image in there before you replace the SIMMS.
> >=20
> > [EMAIL PROTECTED] ("CCNA") wrote in
> > <001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:=20
> >=20
> > >Hi All,
> > >I need some help.I am replacing the flash memory of my 3620
> > >router=20
> > >from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
> > >inserted the new Flash SIMMs
> > >(They are blank).After I inserted the Flash SIMMs the router's =
> "syetem"
> > >LED started blinking constantly. I have also replaced the DRAMs =
> from
> > >24 MB to 64 (16x4) but they are fine.
> > >Following is the error message
> > >
> > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE =
> SOFTWARE
> > >(fc1)
> > >Copyright (c) 1999 by cisco Systems, Inc.
> > >C3600 processor with 65536 Kbytes of main memory
> > >Main memory is configured to 64 bit mode with parity disabled
> > >
> > >loadprog: error - Invalid image for platform
> > >e_machine =3D 43, cpu_type =3D 30
> > >boot: cannot load "flash:"
> > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
> > >SOFTWARE (fc1)
> > >.
> > >.
> > >romon1>.
> > >
> > >What I want to ask is is it possible that we can insert a brand new
> > >flash in the router and install the new IOS in it provided there is =
> no
> > >flash Memory in it on other slots or I can only upgrade not replace =
> the
> > >flash SIMMs with the new ones???
> > >
> > >What should I do to make it work ?? I have a 3640 router also.Can it =
> be
> > >of my help in any way ? How can I insert the new flash of 16MB in
> > >3640 which has 8 MB SIMM and copy the IOS in it and place it back to
> > >3620 ?? Partition like thing ..
> > >Please giude me.
> > >
> > >Thanks to All
> > >
> > >
> > >_
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html Report misconduct and
> > >Nondisclosure violations to [EMAIL PROTECTED]=20
> > >
> > >
> >=20
> > _
> > FAQ, list archives, and subscription info: =
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >=20
>
> _
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 3600 Flash
Thanks Chris and Pawel, The problem was solved by the Xmodem from rommmon>. That was really a very very slow procedure and took about 1.5 hours to transfer the image through the Console cable. CCNA - Original Message - From: "Pawel Sikora" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 31, 2001 7:41 PM Subject: Re: 3600 Flash > - Original Message - > From: "Chris Supino" <[EMAIL PROTECTED]> > To: "CCNA" <[EMAIL PROTECTED]>; <> > Sent: Wednesday, January 31, 2001 12:38 PM > Subject: RE: 3600 Flash > > > > CCNA, > > > > You will need to replace the image on the flash chips via console cable > > (Xmodem) after you insert the new flash chips. This is the only way to do it > > on a 3600. I believe on a 2600 you have TFTP download available from Rommon > > mode. > > > ... > > What should I do to make it work ?? I have a 3640 router also.Can it be of > > my help in any way ? How can I insert the new flash of 16MB in 3640 > > which has 8 MB SIMM and copy the IOS in it and place it back to 3620 ?? > > Partition like thing .. > > Please giude me. > > Yes, this should work except of necessary partitioning and flashing again > old software of 3640 into old partition. > > Without 3640 you can do it as follows: > Install old 2x8 fsimms and boot old software > Partiton flash into 2 equal size partitions (8MB each) > Flash any old software less than 8Mbit into one partition > Install mix of old and new fsimms (total of 24M flash should appear) > Partition once again into 2 or 3 partitions of 8MBs > Flash partition beginning at new fsimm boundary > Install both new fsimms > Finally partition and flash as desired. > > P/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re:3600 Flash
Thanks but how to download IOS to the new Flash via your console port =
(or any other way) from rommode.>???
=20
"hmt" <[EMAIL PROTECTED]> wrote in message =
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> When you remove the old flash, there goes your IOS. For some reason =
the=20
> "rom" IOS doesn't allow you to download images via tftp from rom mode. =
You=20
> will need to download IOS to the new Flash via your console port from=20
> rommode.
> One way to get around is if you have a flash card (not SIMMS), copy an =
IOS=20
> image in there before you replace the SIMMS.
>=20
> [EMAIL PROTECTED] ("CCNA") wrote in
> <001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:=20
>=20
> >Hi All,
> >I need some help.I am replacing the flash memory of my 3620
> >router=20
> >from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
> >inserted the new Flash SIMMs
> >(They are blank).After I inserted the Flash SIMMs the router's =
"syetem"
> >LED started blinking constantly. I have also replaced the DRAMs =
from
> >24 MB to 64 (16x4) but they are fine.
> >Following is the error message
> >
> >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE =
SOFTWARE
> >(fc1)
> >Copyright (c) 1999 by cisco Systems, Inc.
> >C3600 processor with 65536 Kbytes of main memory
> >Main memory is configured to 64 bit mode with parity disabled
> >
> >loadprog: error - Invalid image for platform
> >e_machine =3D 43, cpu_type =3D 30
> >boot: cannot load "flash:"
> >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
> >SOFTWARE (fc1)
> >.
> >.
> >romon1>.
> >
> >What I want to ask is is it possible that we can insert a brand new
> >flash in the router and install the new IOS in it provided there is =
no
> >flash Memory in it on other slots or I can only upgrade not replace =
the
> >flash SIMMs with the new ones???
> >
> >What should I do to make it work ?? I have a 3640 router also.Can it =
be
> >of my help in any way ? How can I insert the new flash of 16MB in
> >3640 which has 8 MB SIMM and copy the IOS in it and place it back to
> >3620 ?? Partition like thing ..
> >Please giude me.
> >
> >Thanks to All
> >
> >
> >_
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html Report misconduct and
> >Nondisclosure violations to [EMAIL PROTECTED]=20
> >
> >
>=20
> _
> FAQ, list archives, and subscription info: =
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>=20
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 3600 Flash
- Original Message - From: "Chris Supino" <[EMAIL PROTECTED]> To: "CCNA" <[EMAIL PROTECTED]>; <> Sent: Wednesday, January 31, 2001 12:38 PM Subject: RE: 3600 Flash > CCNA, > > You will need to replace the image on the flash chips via console cable > (Xmodem) after you insert the new flash chips. This is the only way to do it > on a 3600. I believe on a 2600 you have TFTP download available from Rommon > mode. > ... > What should I do to make it work ?? I have a 3640 router also.Can it be of > my help in any way ? How can I insert the new flash of 16MB in 3640 > which has 8 MB SIMM and copy the IOS in it and place it back to 3620 ?? > Partition like thing .. > Please giude me. Yes, this should work except of necessary partitioning and flashing again old software of 3640 into old partition. Without 3640 you can do it as follows: Install old 2x8 fsimms and boot old software Partiton flash into 2 equal size partitions (8MB each) Flash any old software less than 8Mbit into one partition Install mix of old and new fsimms (total of 24M flash should appear) Partition once again into 2 or 3 partitions of 8MBs Flash partition beginning at new fsimm boundary Install both new fsimms Finally partition and flash as desired. P/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 3600 Flash
CCNA, You will need to replace the image on the flash chips via console cable (Xmodem) after you insert the new flash chips. This is the only way to do it on a 3600. I believe on a 2600 you have TFTP download available from Rommon mode. Chris -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of CCNA Sent: Wednesday, January 31, 2001 2:27 AM To: [EMAIL PROTECTED] Subject: 3600 Flash Hi All, I need some help.I am replacing the flash memory of my 3620 router from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and inserted the new Flash SIMMs (They are blank).After I inserted the Flash SIMMs the router's "syetem" LED started blinking constantly. I have also replaced the DRAMs from 24 MB to 64 (16x4) but they are fine. Following is the error message System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C3600 processor with 65536 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled loadprog: error - Invalid image for platform e_machine = 43, cpu_type = 30 boot: cannot load "flash:" System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE SOFTWARE (fc1) . . romon1>. What I want to ask is is it possible that we can insert a brand new flash in the router and install the new IOS in it provided there is no flash Memory in it on other slots or I can only upgrade not replace the flash SIMMs with the new ones??? What should I do to make it work ?? I have a 3640 router also.Can it be of my help in any way ? How can I insert the new flash of 16MB in 3640 which has 8 MB SIMM and copy the IOS in it and place it back to 3620 ?? Partition like thing .. Please giude me. Thanks to All _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 3600 Flash
When you remove the old flash, there goes your IOS. For some reason the
"rom" IOS doesn't allow you to download images via tftp from rom mode. You
will need to download IOS to the new Flash via your console port from
rommode.
One way to get around is if you have a flash card (not SIMMS), copy an IOS
image in there before you replace the SIMMS.
[EMAIL PROTECTED] ("CCNA") wrote in
<001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:
>Hi All,
>I need some help.I am replacing the flash memory of my 3620
>router
>from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
>inserted the new Flash SIMMs
>(They are blank).After I inserted the Flash SIMMs the router's "syetem"
>LED started blinking constantly. I have also replaced the DRAMs from
>24 MB to 64 (16x4) but they are fine.
>Following is the error message
>
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE
>(fc1)
>Copyright (c) 1999 by cisco Systems, Inc.
>C3600 processor with 65536 Kbytes of main memory
>Main memory is configured to 64 bit mode with parity disabled
>
>loadprog: error - Invalid image for platform
>e_machine = 43, cpu_type = 30
>boot: cannot load "flash:"
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
>SOFTWARE (fc1)
>.
>.
>romon1>.
>
>What I want to ask is is it possible that we can insert a brand new
>flash in the router and install the new IOS in it provided there is no
>flash Memory in it on other slots or I can only upgrade not replace the
>flash SIMMs with the new ones???
>
>What should I do to make it work ?? I have a 3640 router also.Can it be
>of my help in any way ? How can I insert the new flash of 16MB in
>3640 which has 8 MB SIMM and copy the IOS in it and place it back to
>3620 ?? Partition like thing ..
>Please giude me.
>
>Thanks to All
>
>
>_
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html Report misconduct and
>Nondisclosure violations to [EMAIL PROTECTED]
>
>
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
