[Elecraft] Re: K2+1
For those who asked about cooling. There is no top cover on the KAT-100...the bottom of the K2 is exposed (providing shielding between the KAT-100 and the K2) and the position of the aux fan in the DB-9 location blows air across and up through the ventilation holes in the bottom of the K2. I just finished some tests. I chose 45W output as it is good for digital modes and driving my KW amp to full output. After 7 minutes key down into a dummy load (Duty cycle? We don't need no stinking duty cycle!) the large heat sink is cold on the left side, warm on the left half and right side and very warm directly over the KPA-100's output transistors. The air bleeding from the front of the KAT-100 is cold. I suspect the basic K2 output stage is benefiting as well. Nothing like the fried egg feeling when I put my hand on the KPA-100 after CQing for 4 mins without the 2nd cooling fan mounted in the KAT-100. Ohif you don't have the 60M mod do NOT turn on the d1g menu settingsomehow that got set during my consruction of the K2+1 and the symptoms are a loss of PLL on 40M. The guys at Elecraft straightened me out on that in one e-mail. If anyone else builds their KAT-100 into their K2 I'd like to hear from them. 73 de Tom K2TA I looked at your photos and I was wondering about cooling of the K2's finals...There are ventilation holes in the bottom cover of the basic K2...My recollection of the enclosure for the KAT100-1 is that there are no ventilation holes in it...Do you run digital modes, and if so, have you experienced any heat build up problems?...73 Jerry, wa2dkg K2 # 2549 KX1 # 839 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] (no subject)
I have a question about soldering irons for circuit board solderingI have been using a Solder-it Pro 70 powered by Butane but it develops heat from 750F to 2500F. I have used it mainly for repair work and adjust it mid range but of course I am not knowledgable as to what the temp is at mid-range. Any suggestions? I cannot afford a hundred dollars or more for a new one. Paul Gates [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] (no subject)
There was a great little $35 tempraturn controlled iron on the reflector about 2 months ago. Santa brought me one and it's fine. I run it at 700 degrees F. Any hotter is very dangerous. Get one. If you can't find it, let me know and I'll research the Archives for you. Dan / WG4S / K2 #2456 I have been using a Solder-it Pro 70 powered by Butane but it develops heat from 750F to 2500F. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] DMM Recommendations
In a message dated 1/10/2005 7:02:56 PM Pacific Standard Time, [EMAIL PROTECTED] writes: I just bought a VC97 autoranging DMM with a counter to 30 mhz. for 29.95 from kaitometers and they have abunch more you can drool over...John KF7OM Tried Googling kaitometers but shows nothing. Would like to look to see what they have. Do you have the link? tks geoffk6tfz ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] DMM Recommendations
I have a fluke 112 and I love it and hate it the auto ranging is great but the auto shut off is a pain in the *** well you get the point but I would recommend the fluke 112 to anyone with that warning. - Original Message - From: R. Kevin Stover [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Monday, January 10, 2005 2:40 PM Subject: Re: [Elecraft] DMM Recommendations I just Got a B+K Precision model 2707A from Kiesub Electronic Supply for $91 and change. It isn't autoranging like the Fluke but I figure I can turn a dial. You may be able to get it a little cheaper at Mouser but I ordered mine at the same time I ordered my Hakko 936. K2/100 with all the goodies arrives Wednesday. Good Luck. -- R. Kevin Stover, ACØH ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K1 Sold
K1 sold . . thanks for the interest, guys! 73 de Rick, WQ8Q ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 Sold
Sale is pending on K2 s/n 3155. Thanks for looking! 73 de Mike, W2VD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Test posting
Anyone else having problems posting to this list. Joe-K3JV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K1,KX1,K2
I just completed my K1 (ser #1949). Using the K1 as a base line for time and difficulty. Please compare the K2 and KX1. I wish to start looking at my next project. I like building kits -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Fw: K2 FOR SALE
I am selling my K2 (SERIAL NO. 03156) to reduce my radio inventory, too many radios here. The K2 was built in Jan 0f 2003 and has seen little use, not because of any problems or dislikes, it is a great piece of equipment. My main radio is the Yaesu FT1000MP, so there isn't a good reason to have two first class HF rigs in the shack and I have decided to sell the K2. The rig and all add ons went together as described and have worked flawlessly since construction. Here is whats in the K2: K2 HF transceiver, KPA 100-100 watt amplifier, KSB2 SSB option, K160RX 160 meter option, KAT100-2 100 watt external tuner, KAF2 Audio Filter, KIO2 RS232 Interface option, KBT2 Internal Battery Kit, MH2 Hand held Microphone Included is the low power cover with speaker and battery, if you want to operate the radio in the lower power configuration. I have a little over $1600 in the radio with all the options and I am offering it for sale at $1300 to any one in the CUS.Buyer pays shipping. If you are sincerely interested in taking ownership of the excellent rig pleas e-mail me. Joe K3JV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Date/Time of Elecraft QSO Party EQP 2005?
Hello, planning to take part in the EQP 2005 from DK0SU again I got to check if the clubroom is free -- anyone knowing the official date/time when EQP 2005 takes place? Any changes within the rules compared to last year? TNX, 73 Thomas, DF7TV -- Thomas Martin, Stuttgart, Germany http://www.qsl.net/df7tv http://www.qslnet.de/member/df7tv ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Test
Hi all This is a test... De sm3ahh ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] DMM Minimum Capacitance Measurements ?
. Subject: DMM Minimum Capacitance Measurements ? To: Elecraft List Please, What is the lowest capacitance value you can measure with the popular DMMs ? (in picoFarads ?) DMM specs do not spell out what the minimum capacitance is.. Jim - W1FMR . Best Regards, Jim AMERICA;WE ARE STILL BLESSED ! Best Regards, Jim AMERICA;WE ARE STILL BLESSED ! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Audio Diary
From: Pete Norman Well those pesky IC pins must have behaved themselves because when I switched on for the first time everything checked out A1 OK and I think that's the first time I can ever say that All the more exciting because I am doing an audio diary of my build for a magazine I do recordings for which goes to the blind and partially sighted. If you want an extra buzz, try doing a live recording of the most critical moments; just as well I spotted I had put the MPU in back to front before I switched on! If any of you guys have got comments I could add I'd be pleased to include them. Does anybody have experience of the Voice software? It would be useful if I could let people know how effective it is. By the way, my digital multimeter has a voice synthesizer, so you can concentrate on where you are putting the probes, and then Professor Hawking tells you what your reading is. Highly recommended! Right, time to start on the RF Board! Regards to all!Pete, g0pks. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Test posting
On 1/11/05 1:17 PM, Joseph Vilardo [EMAIL PROTECTED] wrote: Anyone else having problems posting to this list. Joe-K3JV I'm sorry Joe, but I can't resist. Isn't this a bit like the teacher saying Anyone who is absent today please raise your hand.? More to the point, your message seems to have made it without any problems. 73, Gus / KB0YH ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] DMM Minimum Capacitance Measurements ?
Jim, I imagine different DMMs have different lower ranges, but what ever the lower range is, you can measure even smaller capacitors by paralleling them with one that does fall into the lower range of your particular DMM. First measure the value of the capacitor that falls within your DMM's range then connect the smaller one in parallel - the difference in the new value measured is the capacitance of the smaller one. Of course with small values you have to use the shortest possible test leads and make sure they stay about the same distance apart for both measurements. Larry Ingram AG4NN K2 sn 2529 snip. What is the lowest capacitance value you can measure with the popular DMMs ? (in picoFarads ?) DMM specs do not spell out what the minimum capacitance is.. Jim - W1FMR . snip ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K60XV Comment and Question
I built up and installed the K60XV module last night and it is another fine addition to my K2! Worked a station at 5AM and had a nice QSO and he was impressed by the audio quality of the rig - was using a Heil HC-4 headset. I have one question, it appears that originally the XVTR output on the PC board was going to be taken from a 4 pin header and the in/out would have been connected via a pair of matching connectors. Since I decided to keep my original heat sink and mount the XVTR in/out jacks on the top cover (I like BNC's better than phono - but that is a personal preference) is there some engineering reason that I cannot put a 4 pin header on the board and attach the in/out jacks via a pair of 2 pin connectors? Main concern is if I need to get under the hood it makes it a bit more difficult. If there is a reason for NOT doing that, I may have to decide which is preferable - live with the difficulty or get a new heat sink and live with the phono connectors. Just curious. 73 Dennis - WB0WAO EN84ij Iosco County, Michigan K2 #3555 Visit my site! www.wb0wao.com :=) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] DMM Minimum Capacitance Measurements ?
Jim, W1FMR asked: What is the lowest capacitance value you can measure with the popular DMMs ? (in picoFarads ?) DMM specs do not spell out what the minimum capacitance is.. --- My Radio Shack DMM will accurately measure capacitance as low as 2 or 3 pf. It has a parasitic capacitance of about 111 pf, but that's not a serious problem when working with small capacitors. I simply subtract the parasitic capacitance from the reading (113 pf - 111 = 2 pf). The meter has sockets for capacitor leads to avoid variable parasitic capacitance from the test leads. I've checked it for accuracy with values at low as 2.2 pf. It will work with the test leads attached too as long as I'm careful to lay the leads out so they don't move around. I've measured the value of caps I can't plug into it easily (e.g. a large variable cap) by arranging the leads so they are close to but not touching the cap and noting the parasitic capacitance. Then I touch the leads to the cap and note the change. I can't guarantee how other DMMs will react, but since a relatively small number of special-purpose I.C.s are used in virtually all DMMs, I'd expect other DMM's in its price class ($70) to behave much the same. Ron AC7AC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] DMM Minimum Capacitance Measurements ?
Jim, from memory typical DMM's do not have low capacitance ranges. I have a LCR type portable DMM that has more useful ranges, but is not so good for voltage and current measurements. It's lowest capacitance range is 200pF full scale so it's possible to measure C's in the pF region. Over here such meters cost about £80, a lot more than typical cheap DMM's. I found it very handy for checking C's and L's when building the K2. 73 Fraser G4BJM _ It's fast, it's easy and it's free. Get MSN Messenger today! http://www.msn.co.uk/messenger ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] I hate it
I'm just so jealous of all those builders experiencing the joy of having their Elecraft kits come to life while here I sit with nothing to do but use and enjoy my K2 and KX1. Having built these guys last year, perhaps it's time to relive the joy of building by selling these units and starting over. I'll think about it. Perhaps I really need two of each of them (and a K1?). I started in ham radio in the very early 1960's and built everything in the shack at that time. Ham radio has never been any more fun than building your rigs from scrounged and discarded parts. Building Elecraft kits is the closest thing to this joy as I've seen since. Thanks, Wayne and Eric. Mike, AB9V ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 Battery
I recently replaced the internal battery in my K2. I also tweaked the power supply so that the correct charging voltage is supplied to the battery. What a difference! Either the original battery wasn't a winner or the charging voltage was wrong or BOTH. The new battery lasts a good long time. Be sure you check the voltage as per the instructions. Just more good news about the K2. 73, Lonnie NY2LJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 Battery
I had done this a year or two ago at the suggestion of Gary. I think he suggested a 14 volt power supply. I had been using a 12 volt supply and the switch to 13.8 really made a difference. These things are good to re-visit from time to time, as not everyone may have caught it the first time around. Tnx for the reminder, Lonnie Tom WB2QDG K2 1103 -Original Message- From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: Elecraft@mailman.qth.net Elecraft@mailman.qth.net Date: Tuesday, January 11, 2005 6:24 PM Subject: [Elecraft] K2 Battery I recently replaced the internal battery in my K2. I also tweaked the power supply so that the correct charging voltage is supplied to the battery. What a difference! Either the original battery wasn't a winner or the charging voltage was wrong or BOTH. The new battery lasts a good long time. Be sure you check the voltage as per the instructions. Just more good news about the K2. 73, Lonnie NY2LJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] DMM Minimum Capacitance Measurements ?
On Tue, 2005-11-01 at 13:23 -0800, Jim F. wrote: What is the lowest capacitance value you can measure with the popular DMMs ? (in picoFarads ?) DMM specs do not spell out what the minimum capacitance is.. My Meterman 34XR has 4 scales - 4000, 400, 40 and 4 uF max scale, resolution is 1 nF. Not terribly useful for things like building K2's - which annoys me, because I bought it to build my K2, and intentionally bought a meter that can measure capacitance. That's what I get for not paying attention to the range that it could measure... :-( Oh well, it's still a very nice meter. I'll probably end up buying this: http://www.aade.com/lcmeter.htm when I can afford it and want to spoil myself. The specs say it can measure .010 pf to 1 uF (most units measure to 1.5 uF). Also inductance: .001 uHy (1 nHy) to 100 mHy (most units measure to 150 mHy). -- 73, Brian VE7NGR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 3 Days left to purchase a 2005 QRP Contest Calendar
Hello, Just a quick note. All calendars that have been ordered as of 00:45 UTC 12 Jan. 2005 will be in the Wednesday evening mail. 15 Jan. is the last day to purchase a 2005 QRP Contest Calendar. Check out: www.n3epa.org Click on: 6th Annual QRP Contest Calendar for 2005 Thanks to all that did purchase a calendar. 72 Ron de N3EPA EPA QRP Club El Presidente' [EMAIL PROTECTED] www.n3epa.org ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] DMM Minimum Capacitance Measurements ?
Brian You won't regret buying the LC IIB meter when you can. It is pretty much the defacto standard among QRP builders. Good luck and 73 Bob N6WG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] NJQRP meetiing this Saturday
Gang, Alas the njqrp e-mail reflector is still down so this announcement is being made here in hopes that NJQRP members will see it. The (ir)regular monthly NJQRP meeting will be held this Saturday, Jan 15 at the Food Court in the Forrestal Center in Princeton, NJ as usual. Folks usually arrive around 9:30 am. We have not set a loose them for the meeting yet though as usual we encourage all to bring their newly acquired goodies, current projects - both finished and in process and any excess parts for giveaway or sale for nominal prices. We definitely will have info on the latest projects, the upcoming Atlanticon event, the first public discussion of the exciting new changes in the Homebrewer and breaking developments in the AmQRP leadership. Please send this along to anyone you think may want to attend and will not see this post. Joe, N2CX [EMAIL PROTECTED] --- use this address for the present George, [EMAIL PROTECTED] --- use this address for the present ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 3 Days left to purchase a 2005 QRP Contest Calendar
I just received my 2005 calander from Ron N3EPA today, and it is GREAT! Chock full of Good Stuff! I encourage everyone to pick one up for the new year. It sure will help bolster the Elecraft to Elecraft contacts and awards and you'll meet a truly nice bunch of folks! Only 4 days left, though - yikes! 73 Paul w9bbr Ron Polityka [EMAIL PROTECTED] wrote: Hello, Just a quick note. All calendars that have been ordered as of 00:45 UTC 12 Jan. 2005 will be in the Wednesday evening mail. 15 Jan. is the last day to purchase a 2005 QRP Contest Calendar. Check out: www.n3epa.org Click on: 6th Annual QRP Contest Calendar for 2005 Thanks to all that did purchase a calendar. 72 Ron de N3EPA EPA QRP Club El Presidente' [EMAIL PROTECTED] www.n3epa.org ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K1,KX1,K2
I built the three radios in the order listed. KX-1 goes together quickly, but is a little more challeging in a couple of tight spots than the K1. The K2 just requires more time. As you well know, nothing is difficult, you just have to put in the time. No matter what, don't get in a hurry, just enjoy the process. The worst part is when the doggone things are all aligned and on the air and you have to stow your soldering station! Best, Jay N5ACM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
