[Elecraft] Panadapter with K2?

[Gottlieb, Jonathan]

 
I'm finally finishing the build of my K2100W.  I started it in 2006 and
built everything except the 100W amp which is what I'm working on now.
Obviously, lots has been going on with Elecraft since I put the
soldering iron down in '06.  I'm curious to hear from anyone who has
been using the P3 Panadapter with the K2.  I'm thinking that would be a
fun accessory to own.  Thanks in advance.

73s

Jonathan Gottlieb
WA3WDK
---
CONFIDENTIALITY NOTICE: The information contained in this e-mail is
confidential, may be legally privileged, and is intended only for the
use of the party named above. If the reader of this e-mail is not the intended
recipient, you are advised that any dissemination, distribution, or
copying of this e-mail is strictly prohibited. If you have received this
e-mail in error, please immediately notify us by telephone at
612.335.1500 and destroy this e-mail.
---

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] How Do I Recover From A Hard Reset?

[Gottlieb, Jonathan]

I am helping a local ham who accidentally did a hard reset on his
K2/100.  He has given me his original manuals which have the various
initial calibration settings recorded, but as he did the hard reset
accidentally, he did not write down the settings you are supposed to
keep before you do a hard reset.  What is the process I need to follow
in order to set his K2/100 back up?  All advice and help is appreciated.

 
Jonathan Gottlieb
WA3WDK









CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K2 Frequency Display Problem

[Gottlieb, Jonathan]

Help!  Yesterday, the frequency display on my K2 #5113 stopped
functioning properly.  When I turned off the K2 I was on 14185.09.  When
I turned the K2 back on later in the day, it read 14063.  Now, every
time I turn the radio on, I see 14063 on 20M no matter what frequency I
was on when I turned it off.  Same problem on every other band, no
matter what frequency I was on when I turned off the radio, it turns
onto a particular frequency when I turn it back on, for example,
18143.90 on 17, 7241.09 on 40.  Any ideas on how to fix this?
 
Jonathan Gottlieb
WA3WDK
K2 #5113









CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Re: Tokyo Hy-Power Amps?

[Gottlieb, Jonathan]

I can't comment on the Tokyo Hy-Power amps, but if you are interested in
building your own 100 watt amp, K5OOR has a new group build project
underway for a 5 watts in, 100 watts out amplifier based on a December
'05 QST article called the SuperPacker Pro.  Here is the url. to his web
site  for more info:  http://www.hfprojects.com/newsletter.htm  I've
been using a version of the amp based on the QST article with my K2 with
great success.  In the interest of full disclosure, I co-authored the
QST article, but the group build is all K5OOR's doing.  Those of you who
have built any of K5OOR's projects (the HFPacker amp, the PowerPak, the
Z-Match) know that Virgil does a really nice job and the Superpacker Pro
has a lot more features than the Tokyo Hy-Power amps, including input
overdrive protection. 
 
Jonathan Gottlieb
WA3WDK
K2/100 #4853
K2 #5113
 
 
To: elecraft@mailman.qth.net 
Subject:[Elecraft] Tokyo Hy-Power Amps? 
From:   Bill Allen <[EMAIL PROTECTED]
 > 
Date:   Tue, 25 Apr 2006 08:56:37 -0500 (GMT-05:00) 

Has anyone had any experience with the Tokyo Hy-Power amps, particularly
the 
HL-200Bdx or HL-100Bdx models?


73,
Bill Allen - WA5PB












CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Mic Configuration Question Part II

[Gottlieb, Jonathan]

Thanks to everyone for the suggestions.  I have confirmed that the mic
is wired as per the MH2, including the resistor between pins 1&6.  I
have done all of the KSB2 alignments as far I can.  I still get a >10
watt carrier when I push the PTT in LSB and USB.  In CW when I push the
PTT,  I am getting 2 watts as per the setting.  Interestingly, when I am
getting the carrier of >10 watts (as measured on a Waters dummy
load/watt meter), the K2 display does not show that I am transmitting.
With the mic connected but using Tune, I am getting proper output and K2
display reading. Same with the mic not connected.   Something is very
not right here.  Any thoughts?
 
Jonathan Gottlieb
WA3WDK









CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Heil Handi Mic Configuration Question

[Gottlieb, Jonathan]

I am finishing up K2 #5113 and have run into a snag configuring the
microphone on the K2SB2.  I am using a Heil Handi Mic HM-IC.  Bob Heil
told me to get this mic as he said it would optimize my 706 MKIIG and
the K2.  I'm using the Kenwood 8 pin cable for the K2, again per Heil's
recommendation.  I've set up the P1 on the K2SB2 for the Kenwood mics
using block jumpers.   Setting the K2 power for 2 watts, when I push the
PTT, I'm getting a carrier at over 10 watts out.  No modulation when I
speak, just a constant key down carrier at a very high power output.
I'm using a very reliable and accurate Waters analog watt meter.  Any
ideas on what I've done wrong and what I need to do to fix this?
 
Jonathan Gottlieb
WA3WDK
K2/100 # 4853
K2 #5113









CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Low RF Output on 20 and 30

[Gottlieb, Jonathan]

I have just finished my second K2,  #5113.  I am getting only 0.30 watts
output on 20 and 30.  Adjustment of L8 and L9 and C21 and C23 has no
affect.  All other bands work fine and give me the RF output called for.
Any suggestions on where to look?  
 
Jonathan Gottlieb
WA3WDK









CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Part 1 Test Failure

[Gottlieb, Jonathan]

I am currently building my second K2,  #5113 (first is #4853).  I have
run into a problem with the Alignment and Test, Part 1.  When I first
turned the K2 on, I got INFO 201, but it did not switch to the default
frequency display for 40 Meters.  I turned it off and turned it back on
again, now all I get in the display is ELE and nothing else.   I don't
see this kind of problem listed in Troubleshooting.  Any suggestions?
 
Jonathan Gottlieb
WA3WDK









CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone at 612.335.1500 and destroy this e-mail.


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

RE: [Elecraft] KAT100 Won't Tune When IC706 Also Turned On

[Gottlieb, Jonathan]

Here is the set up:  Two antennas come into the house to an MFJ two position 
switch, antenna A and B.  A three foot run of RG8X goes to a second MFJ two 
position switch, Xcvr A is K2, Xcvr B is IC-706.  That's it.  I set the antenna 
switch to antenna A or B, and then choose which xcvr to use, the K2 or the 706. 
 When I switch between the xcvrs, one is connected directly to the antenna, and 
the other is switched out of line.  

Jonathan 
WA3WDK  

-Original Message-
From: W3FPR - Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Saturday, August 20, 2005 4:29 PM
To: Gottlieb, Jonathan; elecraft@mailman.qth.net
Subject: RE: [Elecraft] KAT100 Won't Tune When IC706 Also Turned On


Jonathan,

We need to understand your setup with the new switch included a bit better
before giving a proper answer, but I will 'go out on a limb' and make some
assumptions to see if it provides you with a quick answer.

Where did you put the switch?  If it is between the K2/100 and the KAT100,
that would be a reasonable explaination for your problem - the KAT100 must
be connected to the K2 on both the coax and the interconnecting cable to
tune properly (RF must flow during the tune operation).  The switch must go
on the antenna side of the KAT100 - and if it is located there and the 706
is connected to the antenna for receive, you will attempt to tune the KAT100
into an open circuit if the K2 TUNE button is pressed.

Another possible answer (guess) is that the 706 is putting DC on the coax
(for use with an external preamp maybe?) and somehow interferes with the
tuner operation.

73,
Don W3FPR


> -Original Message-
>
> Any thoughts on this one:  Today I hooked up an antenna switch so
> I could run the K2/100 and the ICOM 706 and switch between them
> and use one or the other when I want to.  Both radios run off the
> same Astron SS-25 power supply.  When I have the 706 turned on
> and RX only, the KAT100 will not tune 40 or 80 meters.  If I turn
> off the 706, the KAT100 works perfectly.  It tunes all other
> bands with the 706 turned on. The 706 is only receiving so I
> wouldn't think it would be drawing enough current to effect the
> K2.   Any ideas on this gremlin?
>
> Jonathan Gottlieb
> WA3WDK
> K2/100 #4856
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.13/78 - Release Date: 8/19/2005



CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone and destroy this e-mail.

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] KAT100 Won't Tune When IC706 Also Turned On

[Gottlieb, Jonathan]

Any thoughts on this one:  Today I hooked up an antenna switch so I could run 
the K2/100 and the ICOM 706 and switch between them and use one or the other 
when I want to.  Both radios run off the same Astron SS-25 power supply.  When 
I have the 706 turned on and RX only, the KAT100 will not tune 40 or 80 meters. 
 If I turn off the 706, the KAT100 works perfectly.  It tunes all other bands 
with the 706 turned on. The 706 is only receiving so I wouldn't think it would 
be drawing enough current to effect the K2.   Any ideas on this gremlin?

Jonathan Gottlieb
WA3WDK
K2/100 #4856 


CONFIDENTIALITY NOTICE: The information contained in this e-mail is 
confidential, may be legally privileged, and is intended only for the use of 
the party named above. If the reader of this is not the intended recipient, you 
are advised that any dissemination, distribution, or copying of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please 
immediately notify us by telephone and destroy this e-mail.

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K2/100 Portable Battery Pak Question

[Gottlieb, Jonathan]

Does anybody have any experience using the HFProjects Power-Pak with a K2/100?  
It is a nice 12v 7ah gel cell with built in trickle charger 
(www.hfprojects.com).  I wouldn't expect it to power the K2/100 at full 100 
Watts, but I'm thinking it would be a good way to have a nice power supply for 
camping or traveling and run the k2/100 at 35-50 watts.  Please let me know if 
anybody has used this successfully.

Jonathan Gottlieb
WA3WDK
k2/100 #4856
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K2 Speaker Problem

[Gottlieb, Jonathan]

> I had the same problem.  Go into the box and bend the speaker/headphone jack 
> down.  It seems that when you put in the headphones, it bends the connector 
> up so that when you pull it out, it doesn't make contact to engage the 
> speaker.  Good luck.  Let me know if that fixes it.
> 
> Jonathan Gottlieb
> WA3WDK
> K2/100 #4856
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] Looking for some more "Punch" on SSB and No Hi Cur on 30 M

[Gottlieb, Jonathan]

I've got k2/100 #4856.  I've done the C80, C81 mod.  Everything checks out 
great, except I still get Hi Cur on 30 M and it doesn't seem very robust on 20 
or 17 SSB.  80 and 40 M SSB output is fantastic, often peaking right at 100 
watts.  I get 100 W in CW key down on all bands except for 30 M where I get the 
Hi Cur display.  Any thoughts or ideas on how to fix the Hi Cur on 30 and the 
less than robust SSB output on 20 and 17?
 
Jonathan Gottlieb
WA3WDK
 
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] KPA100 Hi Current on 30M

[Gottlieb, Jonathan]

Almost finished with my KPA100.  Power output is 100 watts on all bands except 
30M where I get hi current display over 55 watts.  Any suggestions?

Jonathan Gottlieb
WA3WDK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] KPA 100 Power Calibration SWR Question

[Gottlieb, Jonathan]

I have just completed the Power Calibration (R26 andf R27) on my KPA100.  The 
SWR shows 1.0-1 on 40 and 80M, but then goes up from there.  It is 1.5-1 on 10m 
and power output as indicated on my external power meter shows power declining 
as the SWR is increasing.  I am using an MJF 264 dummy load which is not the 
best.  Any thoughts?  Could I just be seeing a poor load?

Jonathan Gottlieb
WA3WDK


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] RE: KDSP2 U2 Solder the leads?

[Gottlieb, Jonathan]

Thanks to all the great guys who contacted me off line about this.  The 
engineers win!

>  -Original Message-
> From:     Gottlieb, Jonathan  
> Sent: Tuesday, May 10, 2005 9:38 AM
> To:   'elecraft@mailman.qth.net'
> Subject:  KDSP2 U2 Solder the leads?
> 
> Page 8 of the KDSP2 instructions are very clear about soldering the tab of U2 
> in order to relieve mechanical stress from the leads of U2 when the KDSP2 PCB 
> is mounted and the mounting screw tightened.  The instructions do not, 
> however, tell you to solder the leads.  This may be obvious to most, but not 
> to this attorney.  I spent some time looking for the instructions to solder 
> the leads.  Not finding it mentioned, I chalked it up to another case of 
> engineers writing for engineers and went ahead and soldered the leads.  
> 
> Jonathan Gottlieb
> WA3WDK
> K2 #4856
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] KDSP2 U2 Solder the leads?

[Gottlieb, Jonathan]

Page 8 of the KDSP2 instructions are very clear about soldering the tab of U2 
in order to relieve mechanical stress from the leads of U2 when the KDSP2 PCB 
is mounted and the mounting screw tightened.  The instructions do not, however, 
tell you to solder the leads.  This may be obvious to most, but not to this 
attorney.  I spent some time looking for the instructions to solder the leads.  
Not finding it mentioned, I chalked it up to another case of engineers writing 
for engineers and went ahead and soldered the leads.  

Jonathan Gottlieb
WA3WDK
K2 #4856
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] VCO Oscillator Problems and T5

[Gottlieb, Jonathan]

I recently posted a note regarding the fact that I was stuck on the VCO 
Oscillator Test (p.60) of my K2, #4856.  Don, W3FPR gave me some good 
suggestions, but nothing seemed to fix the fact that I couldn't get the 
oscillator to oscillate.  I replaced Q1 and Q2 and the JFET.  Still no 
oscillation.  Being an attorney, not an engineer, I figured I better bring in a 
specialist, so I turned everything over to Andy, WA3LTJ (MSEE and avid builder) 
to see if he could get things working.  After eliminating all other 
possibilities, Andy looked carefully at T5, which turned out to be the problem. 
 Page 54 of the manual tells you that windings 1-2 will look *similar* to Fig. 
6-15.  Page 55 says that windings 3-4 must be wound *exactly* like Fig. 6-16.  
Being an attorney, I read the manual carefully.  I wound 1-2 *similar* to the 
picture and 3-4 *exactly* like the picture. Note the difference between 
*similar* and *exactly*.
 
Here is where I went wrong: my T5 windings 1-2 were in the opposite direction 
as winding 3-4. If the directions of the two sets of windings are not the same, 
then the T5 connections are out of phase and the Oscillator will not oscillate. 
 After rewinding T5 so that both 1-2 and 3-4 are exactly as pictured in Fig. 
6-16, everything is working great.  Am I the only one who has had this problem? 
(Maybe I'm the only lawyer who has tried to build a K2).  I think Elecraft 
should include an errata that says *both* windings of T5 must be look exactly 
as pictured, or at least make sure the windings start and end in the same 
directions. 
 
 
Jonathan Gottlieb
WA3WDK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] VCO Oscillator Test Problem V.2

[Gottlieb, Jonathan]

I checked carefully for shorts and don't see any.  Put everything back together 
again and VCO reading is still .00, but Q1 does not seem to be warming up 
anymore.  Have I fried something?  It has been suggested I trace 8R and 8T, any 
advice on how to proceed on that?  Thanks.

Jonathan Gottlieb
WA3WDK



___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] VCO Oscillator Test Problem

[Gottlieb, Jonathan]

I am building K2 4856.  I've run into a real problem. All tests have gone great 
until the VCO Oscillator.   In doing the VCO Oscillator Test I get a reading of 
0 AND Q1, Q2, Q3 and Q4 on the Control Board all got very hot.  Hot to the 
touch.  Not sure where to go with this one.  Any suggestions?

Jonathan Gottlieb
WA3WDK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] No. 4856

[Gottlieb, Jonathan]

Passed the smoke test last night.  All appears to be in order as spec'd.

Jonathan, WA3WDK

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com