[Elecraft] K2-100 For Sale
K2-100 #7450 - base unit aligned by Elecraft & KPA-100 built & aligned by Don Wilhelm, W3FPR. Includes KSB2 SSB option and KDSP2 Advanced DSP Filter & Real-Time Clock plus Heil headphone mic combo. Reason? My K4 & KPA-1500 too compelling! $750 plus $25 UPS Insured shipping. Contact direct: H. Cary, K4TM Cell: 434-660-8299 Email: H3cary at Gmail dot Com LYNCHBURG VA Sent from the QTH of K4TM in the foothills of the beautiful Blue Ridge mountains of Virginia with my iPad. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 For Sale
KX3 (Factory built) #11219 (lightly used, 6 FT8 contacts only) KXAT3 Internal tuner, KH3 mic, KX3 combo end panels & cover by SideKX. New about$1700. For Sale $1200 includes shipping CONUS. Contact H. Cary off list: H3Cary at gmail dot com 73, K4TM Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 142, Issue 31
And just like a good dog, it comes when called! H Sent from my iPad > On Feb 16, 2016, at 11:01 AM, elecraft-requ...@mailman.qth.net wrote: > > Send Elecraft mailing list submissions to >elecraft@mailman.qth.net > > To subscribe or unsubscribe via the World Wide Web, visit >http://mailman.qth.net/mailman/listinfo/elecraft > or, via email, send a message with subject or body 'help' to >elecraft-requ...@mailman.qth.net > > You can reach the person managing the list at >elecraft-ow...@mailman.qth.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Elecraft digest..." > > > Today's Topics: > > 1. Re: New Purchase Sanity Check (Edward R Cole) > 2. Elecraft 200W Directional Coupler For Sale (Michael Raskin) > 3. Re: New Purchase Sanity Check (Don Wilhelm) > 4. K3 with Amertiron amp (Scott James) > 5. K3 with Amertiron amp (Scott James) > 6. KX3 Macro Commands; Selecting PSK31 or PSK63 > (jkiracof...@charter.net) > 7. Re: Wanted: K2 Nifty Guide (EricJ) > 8. Re: KX3 Macro Commands; Selecting PSK31 or PSK63 (tomb18) > 9. Re: CQ WPX RTTY Contest (Bill Frantz) > 10. Re: CQ WPX RTTY Contest (Bill Frantz) > 11. K3 with Amertiron amp (Jan Ditzian) > 12. Re: KX3 pedestrian mobile? (Larry D. Warner) > 13. KPA500 problem (Mike Crownover) > 14. Re: KX3 pedestrian mobile? (Walter Underwood) > 15. Re: Lots of RTTY activity right now -- great time totry > FSK-D mode on your K3/K3S/KX3 (David Blake) > 16. Re: Microham Microkeyer II, RFI in mike with my K3 > (bernhard.ho...@bmw.de) > 17. Re: Microham Microkeyer II, RFI in mike with my K3 (Jim Brown) > 18. CW-Skimmer Frequency Offset (Hajo Dezelski) > 19. Re: CW-Skimmer Frequency Offset (Hajo Dezelski) > 20. Re: Microham Microkeyer II, RFI in mike with my K3 > (Joe Subich, W4TV) > 21. Re: KPA500 problem (Mike Crownover) > 22. Re: K3 with Amertiron amp (Don Wilhelm) > 23. Re: KPA500 problem (AJ8MH Radio) > 24. Re: Microham Microkeyer II, RFI in mike with my K3 (j...@kk9a.com) > 25. Re: KPA500 problem (Mike Crownover) > 26. Re: KPA500 problem (Jack Brindle) > > > -- > > Message: 1 > Date: Mon, 15 Feb 2016 13:28:26 -0900 > From: Edward R Cole> To: Elecraft@mailman.qth.net > Subject: Re: [Elecraft] New Purchase Sanity Check > Message-ID: <201602152228.u1fmsghb026...@mail42c28.carrierzone.com> > Content-Type: text/plain; charset="us-ascii"; format=flowed > > Don, > > OK. Makes me curious what is happening with my KX3+KXPA-100 (without KAT100). > > My KXPA-100 reaches 100w with 3.9w*drive from the KX3. If, when you > state 10-12w, you mean output of the KXPA-100, I'm not sure I can get > it down that low. The KXPA-100 LED PWR meter reads 25w with only > 0.1w drive from the KX3. > > I do have the KX3 ATU which is normally run when operating. Input > SWR looks like 1.1 into the KXPA-100 (haven't bypassed the ATU to see > if this is normal SWR). > > *Note requires 8w drive on 6m for 80w output. Exceeding 8w will > activate auto-attenuator in the KXPA-100. > > 73, Ed - KL7UW > > --- > From: Don Wilhelm > To: Michael Greb , elecraft > > Subject: Re: [Elecraft] New Purchase Sanity Check > Message-ID: <56c238c3.10...@embarqmail.com> > Content-Type: text/plain; charset=windows-1252; format=flowed > > Mike, > > Yes, that is the way it works - and it is automatic. > > 73, > Don W3FPR > > > > 73, Ed - KL7UW > http://www.kl7uw.com > "Kits made by KL7UW" > Dubus Mag business: > dubus...@gmail.com > > > > -- > > Message: 2 > Date: Mon, 15 Feb 2016 17:59:59 -0500 > From: "Michael Raskin" > To: "elecraft" > Subject: [Elecraft] Elecraft 200W Directional Coupler For Sale > Message-ID: <0B9054E5403F45A496EA1A55841EF413@MRPC> > Content-Type: text/plain;charset="iso-8859-1" > > For Sale: Elecraft 200W Directional Coupler for P3. Brand new in the box. > DCHF-200 1.8-54 MHz, 0.1- 200W Comes with sensor cable. $55, which > includes free shipping CONUS. Mike, W4UM > > > -- > > Message: 3 > Date: Mon, 15 Feb 2016 18:02:11 -0500 > From: Don Wilhelm > To: Edward R Cole , Elecraft@mailman.qth.net > Subject: Re: [Elecraft] New Purchase Sanity Check > Message-ID: <56c258f3.2090...@embarqmail.com> > Content-Type: text/plain; charset=windows-1252; format=flowed > > Ed, > > I did not state 10-12w. > I think your KX3 and KXPA100 is working OK. > The KXPA100 was designed to be driven to full output with up to 5 watts > of drive (it works with the Yaesu FT-817). > The drive power specified is 3.5 to 7 watts, and you fall right in that > range except for 6 meters. > > 73, > Don W3FPR > >> On 2/15/2016
[Elecraft] Mic sold
The Elecraft mic has been sold. Cary, K4TM Sent from Clovelly Cottage, home of amateur radio station K4TM and the most creative Sue Cary, with my iPhone 6 in Lynchburg VA - a great place to live, work, play, and retire! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FOR SALE - 2 Items
(1) SignaLink USB Sound Card Interface w/ K3 connecting cables/instructions.. New it's $119.95; yours for $65 w/ shipping Conus included. Contact off list: h3c...@gmail.com 434- 660-8299 cell H. Cary, K4TM Lynchburg VA (2) Heil desk mic w/ Elecraft name on mic face; black and chrome base. 8-pin connector works w/ K2 or K3 or K3s - terrific audio! Photo available on request, contact: h3c...@gmail.com $95 shipped CONUS. 434-660-8299 H. Cary, K4TM Lynchburg VA Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft logo Heil mic -FOR SALE
Elecraft logo Heil mic w/ black chrome base (photo available on request). $150 + shipping CONUS. Contact off list - H. Cary, K4TM Lynchburg VA 434-669-8299 h3c...@gmail.com Sent from Clovelly Cottage, home of amateur radio station K4TM and the most creative Sue Cary, with my iPhone 6 in Lynchburg VA - a great place to live, work, play, and retire! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 Panadapter w/ SVGA - FOR SALE
Elecraft P3 Panadapter (serial #888) with P3-SVGA for large screen monitor FOR SALE, Lightly used. $750 shipped CONUS - new this would cost $980 plus shipping. Contact direct, please. 73, H. Cary, K4TM Lynchburg VA Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA-500 FOR SALE
For Sale: Elecraft KPA-500, serial # 0698, solid state linear amplifier, covers 160-6 meters. Factory upgraded w/ T/R circuit plus 12-meter low pass filter mod on June 1, 2015. Amplifier meets or exceeds all factory specifications. $1750 shipped CONUS. Please contact direct: h3c...@gmail.com Cary, K4TM Lynchburg VA 434-660-8299 Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA-50o and P3 Panadapter: SOLD
Both the amp and Panadapter have been sold. 73, Cary Sent from Clovelly Cottage, home of amateur radio station K4TM and the most creative Sue Cary, with my iPhone 6 in Lynchburg VA - a great place to live, work, play, and retire! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3-100 SOLD
K3-100 #3448 has been sold. 73, Cary, K4TM Sent from Clovelly Cottage, home of amateur radio station K4TM and the most creative Sue Cary, with my iPhone 6 in Lynchburg VA - a great place to live, work, play, and retire! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3-100 FOR SALE
K3-100, #3448, for sale includes: auto ant tuner (KAT3), 2nd receiver (KRX3-K), digital voice recorder (KDVR3), general coverage receiver (KBPF3), Rx Ant/IF out/transverter Interface (KXV3A-UPGR), DSP LPF Board (K3 DSPLPF-F), with 500 Hz, 1.8 KHz 2.7 KHz filters and MH-2 Mic. FACTORY CALIBRATED ALIGNED April 2015. New cost well over $4K, yours for $3450 and I will ship/insure CONUS only. Please contact direct: H. Cary, K4TM Lynchburg VA 434-660-8299 h3c...@gmail.com Sent from amateur radio station K4TM with my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Piglet
Santa brought me an iPadAir for Xmas and I'd like to sync it w/ a Piglet (Pignology product) for CW and digital modes as shown in Sept. 2013 CQ article and to use w/ HamLog. The Piglet has an RS-232 male connector and my IPad has a lightening connector at the iPad w/ a USB connector at the other end. Surely there must be an adapter plug to connect these two varieties (USB/RS-232) but my on-line search hasn't found one. Has anyone on the reflector successfully put together a similar setup and could point me in the right direction? 73 Happy New Year, Cary, K4TM Sent from Clovelly Cottage, home of amateur radio station K4TM and the most creative Sue Cary, with my iPhone 6 in Lynchburg VA - a great place to live, work, play, and retire! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Lightening
I had a similar event. It took out my Yaesu rotor and control box, SteppIR controler board, and my KAT500. Like you, my K3 and KPA500 wre A-OK I sent KAT500 to Elecraft for repair and mine acted just like yours. (you must get an authorization # before sending). It was DOA @ Elecraft and cost of new board about equal to a new KAT500 - bummer. Good luck, I'm installing polyphaser's on SteppIR and new Yaesu rotor control lines this week. 73, Cary, K4TM Lynchburg VA K3-100 #3448, KPA500 #698 Sent from my iPhone in Lynchburg VA. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] N8LP Tuning Relay w/ K3/KPA500 - help, please
Jim: I found my interrupter and, yes, pin 10 had been removed - I installed it. Unfortunately, my amp still doesn't switch to standby when transmitting while SteppIR is tuning. Headed to Richmond Va for the day, I'll get back to it this evening! Tnx for your help! 73, Cary, K4TM Lynchburg VA Sent from my iPhone in Lynchburg VA. On Jul 22, 2014, at 10:33 PM, Jim N7US j...@n7us.net wrote: Do you have the cable that goes between the K3 and the KPA500? If so, a 15-pin gender changer with yellow tape around it should have been included. Look in the manual for interrupter. It has pin 10 removed, which I think/believe is the PTT for the KPA500. By using the interrupter you will have to key the amplifier with the connection you now have through the N8LP relay (I have one too, but I use it to prevent my 87A, my second amplifier, from transmitting when the antenna is tuning.) Here, I found it on page 20: image001.png 73, Jim N7US -Original Message- From: H. Cary [mailto:h3c...@gmail.com] Sent: July 22, 2014 21:09 To: Jim N7US Subject: Re: [Elecraft] N8LP Tuning Relay w/ K3/KPA500 - help, please I'm not sure what you mean by small interrupter, Jim Tnx 4 your prompt response! 73, Cary Sent from my iPhone in Lynchburg VA. On Jul 22, 2014, at 9:49 PM, Jim N7US j...@n7us.net wrote: Cary, I think it will work as you want if you use the small interrupter between the end of the cable from the K3 where it attaches to the KPA500. 73, Jim N7US -Original Message- Elecraft Reflector participants: If any of y'all use the N8LP tuning relay w/ your K3 and KPA500, I appreciate your help. My kit went together smoothly and all ohm meter checks A-OK. When I plug the relay into the SteppIR control box the green light comes on. I have RCA phono plug cable running from the PTT connection on the relay to the PTT In connector on K3 and another from the PA Key on Amp to the LOOP plug on Relay box. When I key PTT while SteppIR is tuning, KPA500 does not switch to standby as I believe it should. Obviously I'm doing something wrong. I even tried the Key Out connection on the K3 but that didn't work either. Any thoughts would be appreciated! 73, Cary, K4TM Lynchburg VA H. Cary III h3c...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 and panadapter add-on in CQ
K2 Owners- The new issue of CQ magazine (Oct 2010) has an interesting piece on adding panadapter capability to a K2, including color photo of the buffer amp installation. You can find it on pages 80-81 - under the heading Repurposing a Softrock - very interesting! 73, H Cary, K4TM K2-100 #4991 K3-100 #3448 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Invitation to connect on LinkedIn
LinkedIn I'd like to add you to my professional network on LinkedIn. - H H Cary City Council member at City of Lynchburg Lynchburg, Virginia Area Confirm that you know H Cary https://www.linkedin.com/e/sn8jl7-gelh8u1r-5v/isd/1715099626/NtlxEy1c/ -- (c) 2010, LinkedIn Corporation __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Wireless SNAFU
Thanks to all who were willing to share their knowledge - reasonably certain it's a router protocol issue and can be resolved readily. And to David Gilbert, I'll be happy to help when you have a lawn mower problem. Many thanks, this is a terrific group! 73, Cary, K4TM Sent from my iPhone. On Jun 19, 2010, at 12:28 PM, Nidge \(Nigel Smith\) nig_sm...@o2.co.uk wrote: Hi Cary Check to see if your router has an accelorator enabled, such as 802.11n which your new Compaq can accomodate but unfortunately your older Dell and Macbook may not have the facility. If you are comfortable at accessing the settings of your router select 802.11g and see if your Dell and Macbook resolve the network. Also check that, if using encryption, that you have the correct passphrase / key in all the two machines. Hopefully others will respond with other possible remedies. Regards Nidge (G0NIG) IO93dv - Original Message - From: Hunsdon Cary III h3c...@gmail.com To: elecraft@mailman.qth.net Sent: Saturday, June 19, 2010 5:13 PM Subject: [Elecraft] Wireless SNAFU Elecraft List Readers: I bought a new PC to manage my home wireless network, along with a new Verizon modem/wireless router - lighting took the old ones out earlier this week but not my K3 and K2 and other radio equipment. The new Compaq is much faster than the old computer and runs Windows 7. The wireless is working and I can connect to the internet from the new computer but neither my XYL's MacBook or my HP/laptop can connect to the wireelss system. The Geek Squad at BestBuy wasn't much help, saying only it happens with Window 7 and the best way to resolve it is with a home visit... starting at $149.95! I have been to the control panel to trouble shoot the network and internet connection but it's unable to diagnose any problem. Have any of you experienced a similar problem and , if so, how were you able to resolve it? 73, H. Cary, K4TM K3-100 # 3448, K2-100, #4991 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html --- --- --- --- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.829 / Virus Database: 271.1.1/2948 - Release Date: 06/19/10 07:35:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Don
Allow me to weigh in on the personal information issue. W3FPR did not post ANY private information, only the name and call sign of another ham - if it's readily available on the internet, as it is on QRZ.com, it is not PRIVATE - anyone with a computer can get it for goodness sakes! I can only speak for myself but I subscribe to the reflector so I can read W3FPR's postings! He has helped me on several occasions and I ALWAYS learn something from his e-mail answers. This reflector will be a much less interesting place without him and I hope he will reconsider only taking questions at his home e-mail addresses. Perhaps, Wayne and Eric can convince him to stay - I sure hope so. Don, Nolite te bastardes carborundorum! 73, H. Cary, K4TM Lynchburg VA K2-100 #4991 K3-100 #3448 [ex-K3-100 #0178] __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 and Centurion connection?
I've just gotten a like new TenTec Centurion to replace my Heathkit SB-200. I operate 95% SSB and am a bit perplexed about the connection from the K3 to the Centurion. Yes, RF from K3 goes to RF In, that I know; the question is does the Key Out go to the PTT/VOX or Key In. I'm thinking PTT/VOX but I don't want to assume and screw this up! Anyone have this set up that can help? TenTec offices are closed at the moment or I'd call them. BTW, if anyone is interested in an SB-200 in good working condition, please contact me off list. Thanks and 73, H Cary, K4TM K3-100 #3491 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KANT3- FREE
I installed the KAT3 Internal ATU in my K3 during the blizzard of 2009. I now have the KANT3 Antenna Input Module that I no longer need. If anyone needs one, I'll ship it to you - CONUS ONLY - at no charge to you. 73 Merry Christmas, H Cary, K4TM LYNCHBURG, VA K3-100 #3491, K2-100 #4991 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KANT3
The KANT3 is on its way to Rhode Island. Thanks to all who replied. 73 and Holiday wishes, H Cary, K4TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] soft keyer and tuner 4 sale
I have the folowing for sale: [1] Sunlight Energy Systems AmpKeyer...soft start for an older linear amplifier. Three bright LED lights let you know there is power to AmpKeyer, if amp is being keyed, and status of standby/op switch. All connections to from amp are via RCA type jacks, easily obtainable from Radio Shack or your junk box. AmpKeyer was never used and sells new for $49.95+6.00 shipping - yours for $30 and I ship CONUS. For more info, see AmpKeyer at: http://www.theheathkitshop.com/page 13/page13.html [2] MFJ 989D Legal Limit Antenna Tuner w/ roller inductor, tunes 1.8-30Mhz, with peak reading SWR/Wattmeter. Like new, sells new for $389.95...yours for $225 and I ship CONUS. Please contact off list: hc...@wclynchburg.org 73 and Seasons Greetings, H Cary, K4TM K3-100 #3491 and K2-100 #4991 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] AmpKeyer Sold
The AmpKeyer has been sold! Took all of four minutes...amazing! 73, H, K4TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Utility and firmware upgrade
Upgraded my K3 Utility and downloaded firmware revision 3.63 last night. Using Internet Explorer and Windows XP, it was a flawless and EASY process. 73, H Cary, K4TM Lynchburg, VA K3-100 #3449 and K2-100 #4991 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] High speed YL Vibroplex operator
Awhile ago, someone posted a YouTube link to a YL operating CW on a Vibroplex. I thought I saved the link and have tried searching YouTube with no luck. If anyone knows the link, I'd appreciate it if you'd forward it. 73, Cary, K4TM K3-100 #3448 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 has life!
Initial resistance and power on test for K3 #3448 went with out a hitch. 73, Cary, K4TM Lynchburg, Va __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3-100 arrived
Subject: K3-100 arrived K3-100 #3448 arrived safely in Lynchburg, VA today. I have rectified the biggest ham radio mistake I ever made - selling K3-100 #0176! 73, Cary, K4TM K2-100 #4991, K3-100 #3448 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Adieu
K2 #4991 has a new home. I missed #5266 and took Tom up on his sales offer. Glad to be back in the Elecraft family! 73, Cary, K4TM K2-4991 - Original Message - From: elecraft-boun...@mailman.qth.net elecraft-boun...@mailman.qth.net To: Elecraft@mailman.qth.net Elecraft@mailman.qth.net Sent: Sat Jul 25 18:54:48 2009 Subject: [Elecraft] Adieu It is with mixed emotions I bid the reflector a fond farewell. For the past 4 years you have entertained my questions and provided insightful answers and suggestions. The K# community is unique in the world of amateur radio today. No where is so much help and inspiration available for free - in the true amateur spirit. I must admit, parting with 4991 was not as easy as I thought, but I know it will prosper in its new home. Alas, I have been co-opted by the dark forces and have once again ventured into the realm of the rice box. Perhaps there is a K# in my future - who knows? I do know one thing, for sure, you will take me back with nary a snicker. 73 and thanks for all the fish, Tom, NG3V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KBPF-3 SOLD
The KBPF-3 has been sold, thanks for all who expressed interest - 15 of you at last count. 73, Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KBPF3 Gen Coverage Rcvr 4 K3
FOR SALE: KBPF-3 General Coverage Receiver module for K3. New from Aptos, it is $129.95; yours for $95 and I ship CONUS. Contact off list, please: [EMAIL PROTECTED] 73, Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Sold
K3-100 #178 has found a new home north of the Mason Dixon line, hope the harsh winters won't be too much of a shock to her system! Thanks for the many who responded. 73, Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3-100 for Sale
From: H. Cary III Sent: Thursday, July 17, 2008 9:54 AM To: 'elecraft@mailman.qth.net' Cc: H. Cary III Subject: K3-100 for Sale FOR SALE: K3-100, #178 with KAT3 Internal ATU and standard 5-pole 2.7 kHz SSB and KFL3A-500 Hz CW filter, plus MH2 Hand microphone. On air maybe 6 hours since early Jan. 2008. MCU 2.02 and DSP 1.77, latest regular software update. EXCELLENT Condition, non-smoking home. New this rig would sell for $2,307.90; yours for $2050 and I ship CONUS. Beat the 4 month wait and get a discount, too! Contact off list, please: [EMAIL PROTECTED] or via cell # below. 73, Cary, K4TM LYNCHBURG VA 434-660-8299 cell - after 5pm EDT ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K# frequency
I had the same problem with K3-100 #178...problem was the frequency I'd entered for the crystal filter...I used plus and it was supposed to be minus...once I corrected that it was on the money. Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2-100 and KAT-100 SOLD
The K2-100 #5266 and the KAT-100 auto antenna tuner have been sold; amazingly enough to area hams - no shipping! 73, Cary, K4TM LYNCHBURG VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2-100 + KAT-100 for sale
From: H. Cary, K4TM Sent: Tuesday, March 25, 2008 2:07 PM To: 'elecraft@mailman.qth.net' Subject: K2-100 + KAT-100 for sale K2-100, #5266 FOR SALE. Toroids by Mychael, aligned by W3FPR, includes: KSB-2 SSB Adapter, KDSP2 internal DSP filter/real time clock, KNB2 noise blanker, K60XV 60-Meter transverter adapter, K160RX 160-meter module. Excellent condition, non-smoking environment. Kit price $1563, sell for $985 includes shipping CONUS. Also FOR SALE KAT-100 automatic antenna tuner, kit price $239, sell for $185 also includes shipping. Reason? I have a K3-100. Need I say more? Contact off list, please: [EMAIL PROTECTED] 73, H Cary, K4TM Lynchburg, VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 and K4TM in Caribbean next week
Download of latest K3 utility software went flawlessly. Please look for me March 12-18 as PJ7/K4TM or FS/K4TM (12-14) and then VP2V/K4TM the rest of the time. After sailing, approximately 2100 GMT, I'll have a few hours to operate...try 14.210 or 14.255. I'll try to get on 40 cw later in the evening. 73, H Cary, K4TM Lynchburg, VA K3-100 #0178 K2-100 #5266 Icom 706MkIIG (haven't a clue about its #) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Help! K3 data exit?
I need reflector help! I love my K3 but it seems to be smarter than I am. Earlier this week I was working PSK-31 on 10 and 15 meters. Now with the contest this weekend, I want to work USB on those bands but the K3 is in DATA Mode and I can't figure out how to exit and get USB back on 15 and 10 meters. I've read the operating manual about primary controls on page 13 and about DATA Modes on page 31 but still find no reference to how to exit. I figure it must be simple but it sure has me stumped. Can anyone help? I'd sure appreciate it! 73, H Cary, K4TM K3-100 #178 [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Help! K3 data exit?
Don- I knew it was simple but it eluded me. Thanks, now in USB! 73, H, K4TM -Original Message- From: Don Wilhelm [mailto:[EMAIL PROTECTED] Sent: Saturday, March 01, 2008 10:35 AM To: H. Cary III Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Help! K3 data exit? H, Have you tapped the MODE button - it should switch between data, SSB, CW, and AM. If you come up with the wrong sideband on a particular band, hole the ALT button to change sidebands. The DATA mode setup buttons and menu entries switch between the various types of data mode (DATA A, DATA D. etc.) 73, Don W3FPR H. Cary III wrote: I need reflector help! I love my K3 but it seems to be smarter than I am. Earlier this week I was working PSK-31 on 10 and 15 meters. Now with the contest this weekend, I want to work USB on those bands but the K3 is in DATA Mode and I can't figure out how to exit and get USB back on 15 and 10 meters. I've read the operating manual about primary controls on page 13 and about DATA Modes on page 31 but still find no reference to how to exit. I figure it must be simple but it sure has me stumped. Can anyone help? I'd sure appreciate it! 73, H Cary, K4TM K3-100 #178 [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] (no subject)
I had the same problem. I had a + offset on FL1, instead of a -. Once the correct offset was inputted, the alignment worked smooth as silk. GL 73, Cary, K4TM K3-100 #178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] For Sale K2-100 and KAT100
FOR SALE: K2-100 #5266 with: KSB2 (SSB Adapter), KDSP2 (Internal DSP Filter/Real Time Clock), KNB2 (Noise Blanker), K60XV (60-Meter Transverter/Adapter), K160RX (160-Meter module). Yes, it's loaded! Toroids by Mychael (AA3WF), aligned by Don (W3FPR); lives in non-smoking home. All manuals, etc: $1700. Will include TenTec #701 Hand Microphone for $1730 Also FOR SALE: KAT100, auto antenna tuner for K2-100. $280; also lives in same non-smoking home. Reason? While I love my K2-100, it sits idle while my K3-100 continues to mesmerize me with its bells and whistles. 73, H. Cary, (contact direct, please.) K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] firmware update
I just downloaded the latest Firmware update MCU v1.65 and DSP v1.52 It was a piece of cake, literally! Took four minutes max, more like 3 and a half. The screen showed a DSP 2 version available but it did not download. Did I do something wrong? 73, Cary, K4TM K3-100 #178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] For Sale: Tilt Stand for K2 or EC2 Enclosure
From: H. Cary III Sent: Thursday, January 10, 2008 9:19 AM To: 'elecraft@mailman.qth.net' Subject: For Sale: Tilt Stand for K2 or EC2 Enclosure I have an ETS15 matching tilt stand (measures 2.5) for K2 or KAT100 or EC2 Enclosure; never used, in original package. New it is $14; I will sell for $10 and pay shipping CONUS. Please contact off list: [EMAIL PROTECTED] 73, Cary, K4TM K2-100 #5266 K3-100 #178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Tilt Stand Sold
The tilt stand has been sold. Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 SSTV question
Is anyone using their K3 on SSTV? If so, I'd like to contact you off list with a few questions. Tnx 73, Cary, K4TM K3-100 #0178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 QSO
K3-100's #176 (W0SZ) and #178 (K4TM) stumbled upon one another at 14.213 yesterday afternoon. Steve and I spent the time raving about our K3's and how much we have yet to figure out! It is a Happy New Year! 73, Cary, K4TM K2-100 #5266 K3-100 #178 I love my K2 and K3! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ERR TXG Message es tnx
The reference oscillator is now aligned with WWV - thanks to N0SS, W3FPR, DJ7MGQ, and AD7FZ for responding so quickly - Tom talked me through it thankfully. I just did the Transmitter Gain calibration and get an error message - ERR TXG - on all bands 160-6. So after passing all the tests/checks during the build, I seem to be alignment challenged Even more frustrating is the detail on the error message in the book says it could affect one or two bands (how about ALL?) and indicates a problem with band pass filter alignment or one of the low pass filters. Could one of the J-pin connectors be the first place to look? BTW, the good news is the receiver in my K3 is absolutely fantastic! One day, it'll all come together... HNY 73, Cary, K4TM K2-100 #5266 K3-100 #0178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ERR TXG is FIXED!!!!!
Greg- ERR TXG problem resolved. The problem was the offset on the FL1 filter...I had it set for .86 rather than -.86. Once that was changed, everything went like clockwork on the Transmitter Gain Alignment. Thanks to you and so many others for your helpfulness. 73 es HNY, Cary -Original Message- From: Greg [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 01, 2008 7:19 PM To: H. Cary III Subject: RE: [Elecraft] ERR TXG Message es tnx I take it you mean the 2.7 kHz filter? There is no 2.5. You have the Filter Offset set as a negative number in CONFIG? Greg -Original Message- From: H. Cary III [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 01, 2008 4:02 PM To: Greg Subject: RE: [Elecraft] ERR TXG Message es tnx See below, cary -Original Message- From: Greg [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 01, 2008 6:57 PM To: H. Cary III Subject: RE: [Elecraft] ERR TXG Message es tnx Hh...Did you do it after the REF Oscillator calibration? Or before it? AFTER but don't see how that would affect it Please also check that all the coax connectors are fully seated in the correct sockets. I'll do that after I eat some supper What filter do you have setup for TX and what slot is it in? Is it setup for all bands? 2.5 and it is FL1, all bands Greg -Original Message- From: H. Cary III [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 01, 2008 3:20 PM To: Greg Subject: RE: [Elecraft] ERR TXG Message es tnx Greg- That is exactly what I did and got the ERR TXG message on all bands at the 5-watt test level. 73 and HNY de Cary -Original Message- From: Greg [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 01, 2008 6:18 PM To: H. Cary III; elecraft@mailman.qth.net Cc: Richard AD7FZ Subject: RE: [Elecraft] ERR TXG Message es tnx Carey. You still need to do the TX Gain calibration. That's what is causing your error. Page 46/47 of the manual. Set power to 5W and hold TUNE for a couple seconds on ALL BANDS. Then, if you have the KPA3 installed, you need to do the same for ALL BANDS at 50W. Let me know how it goes. 73 Greg AB7R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of H. Cary III Sent: Tuesday, January 01, 2008 2:56 PM To: elecraft@mailman.qth.net Cc: Richard AD7FZ Subject: [Elecraft] ERR TXG Message es tnx The reference oscillator is now aligned with WWV - thanks to N0SS, W3FPR, DJ7MGQ, and AD7FZ for responding so quickly - Tom talked me through it thankfully. I just did the Transmitter Gain calibration and get an error message - ERR TXG - on all bands 160-6. So after passing all the tests/checks during the build, I seem to be alignment challenged Even more frustrating is the detail on the error message in the book says it could affect one or two bands (how about ALL?) and indicates a problem with band pass filter alignment or one of the low pass filters. Could one of the J-pin connectors be the first place to look? BTW, the good news is the receiver in my K3 is absolutely fantastic! One day, it'll all come together... HNY 73, Cary, K4TM K2-100 #5266 K3-100 #0178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 question/problem
I hesitate to put this question on the reflector but support at Elecraft is closed until Wednesday, Jan. 2 - understandable, they DO deserve some time off! The assembly of K3-100 (#178) is complete and went very smoothly...all tests checked out flawlessly, the filters are properly aligned per the calibration instructions (offsets, proper mode, etc). I have done the frequency synthesizer alignment using the zero beat with WWV but when I tune WWV at 10 MHz, I have to get the dial to about 9.999.92 or so to be right on it. I have a sked on Sundays with two friends, W5ZNN and WA6EBB, and was hoping to have my K3 operational so they'd be my first contacts. Well, in a sense they were but apparently my signal is about 500 hertz higher than my receive frequency AND the audio sounds narrow and broken. I think the problem may be with the frequency synthesizer alignment...I used the zero beat method until I can get my hands on a frequency counter from some of my more electronically astute ham friends...am I looking in the right direction or should I be looking somewhere else? Best New Year Wishes to y'all. 73, Cary, K4TM Lynchburg, VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FIXED- k3 fan noise
Long wire being hit by fan blades...quiet as a church mouse now! Now to figure out how to work it all.. A Happy New Year to all. 73, Cary, K4TM K3-100 #0178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] k3 fan noise - lots of it.
K3-100 #178 went together flawlessly, well almost, but it was smooth. Was missing two standoffs and two screws for the fan assembly on the KPA-100. When I did the first fan check, the relay or relays clicked but only one operated very quietly (short lead) ...disconnected it as instructed, installed the KPA-100 module and reconnected the fans panel per instructions. Both fans operate this time but WOW, is it every loud! - my wife came in from the next room wanting to know what was making the noise. Her facial reaction when she realized it was the K3 clearly said: This is the latest and greatest? Is it the missing hardware or are others experiencing noisy fans, too? I've got to fix this, both for my sanity and to save face! Thanks for the help and Happy New Year. 73, Cary, K4TM K2-100 #5266 K3-100 #0178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 arrives
K3-100 arrived at 2:50pm on December 28th...now for the inventory, then the fun begins! (Ordered May 2nd; shipped Dec. 20th) I may not need the assembly manual as I've read it so many times I think I have it memorized. A belated but Merry Christmas present! Happy New Year to all. 73, H Cary, K4TM LYNCHBURG, VA K2-100 #5266 K3-100 # 178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 en route
K3-100 #178 (ordered May 2nd) departed Aptos yesterday en route to Virginia; UPS anticipates a 12/28 arrival...not quite in time for Christmas but it will make for a Happy New Year! Best Holiday wishes to all of you! 73, H Cary, K4TM Lynchburg, VA K2-100 #5266 I love my K2! K3-100 #178 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Logging and sailing - PDA?
I'm going to be hamming and sailing in the Caribbean in March (St. Maarten and British Virgin Islands) and will take either my K2 or K3 with me. I logged by hand the last trip and don't want to do that again. I'm not wild about taking a laptop either. Has anyone had any luck with using something like a PDA with a logging program and portable keyboard? Be nice if the K3 had a logging program built into it and a portable keyboard for entry but that's wishful thinking! I expect to hear from Lisa any day now, having ordered on May 2nd... Any ideas? 73, Cary, K4TM Lynchburg, VA K2-100 #5266 K3-100 #200 waiting expectantly ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 status
I'm confused. I ordered my K3 on May 2nd and I'm reading on this reflector that an order on May 4th has been shipped? What's going on? My e-mail query to Lisa last Monday has gone unanswered - most unusual - and the shipping status note hasn't been updated for some time. Hopefully the Elecraft team recharged their batteries over Thanksgiving and will provide an update in the near future. 73, Cary, K4TM Lynchburg, VA K2-100 #5266 I love my K2 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 status
I certainly did...mea culpa. Cary, K4TM -Original Message- From: Mark Volstad [mailto:[EMAIL PROTECTED] Sent: Saturday, November 24, 2007 8:45 AM To: H. Cary III Subject: [Elecraft] K3 status Hi Cary, It appears that you missed the follow-up posting (see below) from the gentleman in question. 73, Mark AI4BJ OOPS! It seems I may have caused an international incident! I double checked my invoice and it is dated 30th of April, the document saved date is 4th May. ... sorry for the confusion! 73's Vic Tuff G7PYR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 missive hits home
Dave- As a fellow K3 recipient to be, ordered 5/2, your missive of despair struck gold with this ham! I am A+ but am in no shape to offer a transfusion! 73, Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] mic for K2
Dave, TenTec 701 works great and is very reasonably priced, I purchased mine from TenTec for $28 a year or so ago and love it. 73, Cary, K4TM K2-100 #5266 I love my K2! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, August 28, 2007 4:04 AM To: elecraft@mailman.qth.net Subject: Elecraft Digest, Vol 40, Issue 32 Send Elecraft mailing list submissions to elecraft@mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to [EMAIL PROTECTED] You can reach the person managing the list at [EMAIL PROTECTED] When replying, please edit your Subject line so it is more specific than Re: Contents of Elecraft digest... Today's Topics: 1. Re: Elecraft Digest, Vol 40, Issue 31 ([EMAIL PROTECTED]) -- Message: 1 Date: Tue, 28 Aug 2007 03:53:29 EDT From: [EMAIL PROTECTED] Subject: [Elecraft] Re: Elecraft Digest, Vol 40, Issue 31 To: elecraft@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=US-ASCII Hi, Names Dave CALL G0AYD,HAVE K2 qrp version but fully loaded,any of you guys suggest a mic at present am using it on cw but would dearly like to try the quacky duck end of the band.Regards Dave.. -- ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must be a subscriber to post. Elecraft web page: http://www.elecraft.com End of Elecraft Digest, Vol 40, Issue 32 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 linear
I have a K2-100 that I want to hook up to my recently refurbished Heathkit SB-200 linear amplifier. Has anyone already done this and, if so, be willing to share the hook up configuration. I also use the KAT-100 auto antenna tuner but may have to by-pass it when using the linear. Any help will be appreciated as the K2 and other modern rigs don't have a readily identifiable ALC and ANT RELAY connection. 73 Cheers, Cary, K4TM K2-100 #5266 I love my K2! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] TenTec 701 - K2 microphone advice
Subject: Re: [Elecraft] K2 microphone advice Mike, N4JX When you get the microphone. Remove the strain relief connector by removing the two screws and then remove the very small phillips head screw in the side of the connector and twist the shell a 1/4 turn conterclockwise and slip the shell back on the cable. You will find that Pin 1 has a yellow wire and it is the mic audio and connects to Pin 1 of the new 8 pin connector. Pin2 has the shield connected to it and is ground. It connects to pin 8 on the new connector. Pin 3 has a black wire and it is the PTT line - It connects to Pin 2 on the new connector. Pin 4 has a red wire and it is the 5 volts to the elecret element and it connects to Pin 6 in the new connector. Old ConnectorUseColor New Connector 1Mic Audio Yellow 1 2Ground Shield 8 3PTTBlack 2 4+5Volts Red 6 You will need to place jumpers on at least the four lines 1to 1; 8to8; 6to6 2to2. These jumpers are on the connector on the back of the Front Panel Circuit board P1 Mic Config. Connector You can use the standard computer jumper plugs. 73 Cary, K4TM K2-100 #5266 I love my K2 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] mic 4 K2
Greg- Don's advice is excellent. I wired my mic connector as he suggests and use a Ten Tec 701 (Electret element is built in), configured with an 8-pin plug. Excellent audio reports and the price is right: $28 for the mic! Good luck and keep us posted! 73, Cary, K4TM K2-100 #5266 I love my K2! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-2 mic query
Fred and Eric- I went through this a few months ago and got excellent advice from this reflector. TenTec sells a hand mic for $28 (the bias resistor is built in so you don't have to add it to the back of the front panel). I bought it and am using it and getting excellent audio reports. (Usual disclaimer, I own no part of TenTec, etc). All I needed to do was remove the 4-pin connector and replace it with an 8-pin. If you need the pin wiring diagram, I'd be happy to send it to you. Bottom line: you can't beat the price and the performance is OUTSTANDING. 73, Cary, K4TM K-2 #5266 Lynchburg, VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Solomon soldering iron tips
Does anyone know a source for ordering replacement tips for a Solomon SL-10 soldering station on the east coast or mid-west? I know Circuit Specialists has them but it takes awhile to get them from Arizona to Virginia! I'm about to start on the KPA-100. Thanks and 73, Cary, K4TM K2 #5266 Lynchburg, VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 #5266 A-OK
K2 #5266 is up and running and that would not have been possible without the support from Elecraft - Scott and Gary are so responsive to questions and helping me resolve problems I somehow managed to create. Don, W3FPR, and Tom, N0SS, also helped alot along the way. Fortunately for all of them, some problems I avoided by reading the reflector daily! Those who will be adding the SSB mod might like to know - given all the postings about mics - that the TenTec 701 hand mic works nicely; the bias resistor is built into the mic itself and all you have to do is change the plug from a 4-pin to an 8-pin, then follow the KSB instructions. The TenTec mic only costs $28 dollars - a bargain compared to the prices of others I've seen. K4ZM is the one who told me about this - he saw my posting - and even sent the wiring confguration along, too - thanks, Jim! Thanks, Elecraft, for a great product and for encouraging the wonderful comraderie that exists among the Elecraft faithful - it's an added benefit to an excellent product. And the ususual, I have no ownership interest in Elecraft or its products - I just get the wonderful benefit of enjoying one of them - K2 #5266! 73, Cary, K4TM Lynchburg, VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FW: K2 40 tTr VCO lock
Problem solved! Turned D19 in secondary menu to on' and all bands are now within the spec'd VCO range. My thanks to Don, W3FPR, for suggesting this!! 73, Cary, K4TM K2 #5266 From: H. Cary III Sent: Sat 3/25/2006 4:36 PM To: elecraft@mailman.qth.net Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: K2 40 tTr VCO lock K2 #5266 aligned beautifully after I fixed C-6 which the Cheap 'N Dirty Signal Tracer found in about 2 flat. I had it on the air and made about 100 cw contacts before adding some mods: DSP, SSB, NB, 160 meters and 60 meters. I had a problem which was resolved but involved a master reset...so I started on a complete re-alignment today. With the exception of the 40 meter band, the VCO alignment went by the book - 7000 and 7300 Mhz both read 7.92 volts and it does not vary as I tune between those frequencies. I have checked the parts which were replaced in adding the mods noted above and re-heated C-71 through 75 and D-19 20. Hooked it up for testing and it's still a rock solid 7.92 volts on 7000 through 7300. L-30 is the correct inductor; T5 (wound by Mychael) and D21-26 all worked the first time around on the VCO alignment so I doubt there's a problem there. Does anyone on the reflector have any idea where I should look next? If so, I 'd appreciate it! 73, Cary, K4TM Lynchburg, VA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 deaf
K2 #5266 was playing beautifully on cw and I aligned the filters last night for SSB, had no problems with that alignment. When I finished, I found my K2 deaf on ALL bands (it transmits just fine!)...The RANT is OFF, I have good tone with the SPOT feature (yes, I went through the troubleshooting steps), even went so far as to do a reset...nothing restored my K2's ears. Oh, yes, the antenna jack is connected to the 135' dipole and not the dummy load. I'm hoping its something really simple but at this point (actually at 1:30am), I'm mighty frustrated. Anyone have any ideas? 73, Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 40 60 meter problems w/ K2
Thanks to Don, W3FPR, and Tom, N0SS, and Gary in Elecraft Support, plus Harvey, KN6VP, my problem is solved (it wasn't the D19 menu item though!) and everything aligns as advertised! This e-mail eflector is a lifesaver!! Thanks fellas!! 73, Cary, K4TM K2 #5266 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 40 60 meters K2 #5266
Tom- I hate to bother you again but I've encountered another glitch. After I located the problem on 40 meters with your Cheap 'N Dirty Signal tracing (very effective!), everything aligned perfectly on all bands. This weekend, I installed the 60 meter and 160 meter mods and when I powered up my K2 recognized both - that was the good news. The bad news is I can hear no signals on 40 meters and only hiss on 60 but I am clueless as to whether there are any signals on that 60 meter band since its so new (all I hear is a loud hissing and the same on 40 meters). I hooked up my DMM to R30 and get a steady 7.95 volts (a bit above the 7.5 max in the manual but within 10%...the voltage does not change whether I am on 7000, 7300, 5300 or 5450it doesn't budge - a steady 7.95 volts I tried aligning L30 on transmit and can't get above .3 volts on the power meter (that's point 3 volts). Aligning L30 on receive is equally as disappointing - the audio his doesn't vary in intensity at all. On 160, my receive antennna (R ant) menu is on off so that's not an issue. I hear signals on 160 and the voltages on alignment are 1.85 volts at 1800 Mhz and 6.85 at 2000 Mhz. I'm fairly confident the 160 mod is not the problem (but next time I'll install one mod at a time and align before doing the next! But I did have to take the heat sink off to install both so it made sense at the time). I have checked J15 and I have continuity between pins 1 and 3 (that replaced C-6 which was my original problem with being deaf on 40 meters). At this point, I'm tempted to remove the 60 meter mode and replace some RF Board components to put it back to the original state but I hate to throw in the towel so easily. Have you any ideas? 73, Cary, K4TM K2 #5266 From: H. Cary III Sent: Fri 2/17/2006 11:20 PM To: Tom Hammond Cc: [EMAIL PROTECTED] Subject: RE: K4TM K-2 deaf...no wonde! Tom- I just substituted a 5pF NPO from W4QE's junk box of parts and my K-2 now has ears...thanks again for all your help...tomorrow I'll work on the receiver alignment...even without it my K-2 sure does sound good!! Thanks again for all your help. 73, H Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] toroidguy
Harvey- I used toroids wound by Mychael, the toroid guy, and he does excellent work. K2 #5266 aligned per spec's and I'm glad he enjoys what I find the most onerous part of kit building! I highly recommend him! His service is fast, too! 73, Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 microphone advice
I need some help/advice. I have completed K2 #5266 and want to use it on SSB, as well as cw. The MH2 hand mike offered by Elecraft/Heil is no longer available and I don't want to use a head mounted mike with earphones which is the only other alternative through Elecraft/Heil. I admit I'm probably spoiled by the plug 'n play hand mikes I've used with previous Kenwood/Icom rigs and I'd really like something like that to use with my K2. If the Elecraft/Heil MH2 were still available I wouldn't be asking for help but it's not. What do others of you use? Also, does it need to be a mike with any special features? The guys in Elecraft support have been great to work with but I thought I'd start here since its after 5pm on the west coast. 73, Cary, K4TM K2 #5266 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-2 #5266
K-2 #5266 is up and running per specs...many thanks to Tom, N0SS for responding to my cry for help - his 'Cheap and Dirty Signal Tracing' article really saved the day for me. ARRL DX contest is on and first contacts with 10 watts were a PJ2, F2, and DL4.. Thanks to this reflector I've learned a lot just reading! To those still building, keep at it - it's well worth it! 73, Cary, K4TM Lynchburg, Virginia ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-2 deaf @ K4TM
K-2 #5266 is coming along nicely, everything checks out in alignment until the 40-meter Band Pass Filter Alignment on page 64it's deaf on 20-40-80 meters (but the 3Y0X pileup on 30 meters is LOUD) * RF Gain is at max *have 3.90 volts on U2, pin 5 *by-pass jumpers are installed at the proper places * AF gain is all the way up * plenty of audio on all the alignments (until now on 40 meters) *30 meters signals REALLY STRONG (see above) * no apparent cold solder joints or unsoldered points I read the postings today about a K-2 being deaf on 40 (OE6?) and even checked X6 (which fixed his problem) but to no avail Advice, suggestions will be appreciated. Thanks 73, H Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-2 #5266 A-OK
Subject: K-2 #5266 A-OK Part II Alignment and Test for K-2 #5266 went A-OK...all within specs...that sure is a good feeling! Taking it slow and easy but continue to be impressed with the top quality of this product! H Cary, K4TM Lynchburg, Va ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-2 #5266 A-OK
Part II Alignment and Test for K-2 #5266 went A-OK...all within specs...that sure is a good feeling! Taking it slow and easy but continue to be impressed with the top quality of this product! H Cary, K4TM Lynchburg, Va ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft question
Ron, I bought a soldering station from Circuit Specialists in AZ and, as the order was more than $50, I got a FREE Digital Multi-Meter - it does a good job and I get the same readings I do from my BK 2707A (cost me about $80 a year ago from Mouser but it reads capacitance, and transistor gain which the FREE DMM doesn't). FREE is good and the performance is A-OK. I also picked up the needle nose pliers and flush cut pliers (sized for circuit board work) at Home Depot for about $12 and they're great...got all of this info from reading the building tips link on the Elecraft site. Am well along with K2-100, S/N # 5266a fantastic kit and well done in all respects. Good luck, hope you'll join the fray! 73, H Cary, K4TM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com