Re: [LegacyUG] Changing emmail address
I just received 8 new Legacy emails at the address I have unsubscribed from and 0 (ZERO) Legacy emails at the address I have subscribed to!! I do wish somebody would tell me what is going on!!! Both are with the same ISP. Pat - Original Message - From: Pat H [EMAIL PROTECTED] To: LegacyUserGroup LegacyUserGroup@legacyfamilytree.com Sent: Friday, July 13, 2007 10:35 PM Subject: [LegacyUG] Changing emmail address I have changed my email address in accord with the directions on the Legacy website. I am receiving emails at my new address BUT I am still getting a few at the OLD address. SO-O-O I went to the old website and attempte to unsubscribe AGAIN (for the 3rd time!) but I was told I couldn't do that as they didn't have that as an email address. Can someon kindly explain WHAT is going on??? Thanks!!! Pat H. E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07720 http://www.pctools.com/spyware-doctor/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07720 http://www.pctools.com/spyware-doctor/ E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07560 http://www.pctools.com/spyware-doctor/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] error 530
Hi Ellaine, Following Sherry's comments on Xceedzip.dll, which is a dll I am not familiar with, I had to do some research! Yes, it would seem that it is possible for this dll to be taken over by a worm but if your AV and Spyware software is up to date and regularly run and show no problems this is unlikely. More likely is that you have downloaded some software which has installed a different version of this dll and it is either old or not installed properly (in any event I would not be too happy/confident in the software supplier). It is not possible just to exchange this dll for another version as it has to be installed on your computer and registered. Usually the registration will be done automatically during the installation and it maybe that this is where the problem arose. I suggest you run the free scan on this site http://www.dynamiclink.nl/htmfiles/rframes/info_dll/info_x/34.htm to see what they say about this dll on your computer. If you do need to replace it they charge around $13US. I do not know of a free version of this dll. They do state that they are offering the original producer's version and this is important. Although I have used this site myself for other things and found it to be reliable, I do emphasise that I cannot accept responsibility for the outcome and their service. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 19:04:28 -0400 Ron: Thanks for your reply Yes I am going into Legacy filebackup or filerestore. The computer has only been owned by myself - it is a Dell and is about three years old. Prior to just a week or so ago I was able to go into Legacy under file and create a backup and also go into file and click on restore a family file and it all worked fine. I save to varoius drives - D, a memory stick in E and F and of course C. Do you think this could be some sort of a virus? Ellaine Goodall E-mail: [EMAIL PROTECTED] - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 1:00 PM Subject: RE: [LegacyUG] error 530 Elaine, As has been said before this is usually a network error so could you clarify some points for me: When you say in para 2) restore a family file do you mean using FileRestore? When you try to save the back to what drive and folder is it being saved (in the box at the top)? Have you ever managed to back-up or restore using this Desk Top - is it a used one which has come from a company - have you only just obtained it? This error strongly suggests that the computer has previously been used on a network (or currently is) and you do not have the rights to use the back-up facilities. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 12:12:17 -0400 Dear Ron, Cathy, Jack and Legacy support: I have spent some time working with this error in the hopes that if I understand it better I can give to you good folks some helpful information: 1) The error appears when go into the Legacy program and I try to either backup a family file or restore a family family file on my desktop computer ONLY -NO PROBLEM IN DOING EITHER ON MY LAPTOP. 2) I am going into legacy, clicking on file and selecting either back up a family file or restore a family file. - all goes well until I click save and then the following error appears: 3)Backup error: 530 - the license key required to use the control was not found or is invalid. Make sure you have called the license method with a valid license key as described in the documentation. 4) Again when I go into the Legacy program on my laptop and do exactly the same things as listed above - ie bring the file up, select backup a family file or restore a family file, the program works perfectly for C, D or memory. stick. WHAT I DO NOT UNDERSTAND IS WHY I ABLE TO PERFORM THESE FUNCTIONS ON ONE COMPUTER
Re: [LegacyUG] Changing email address
Gary, I am not using Gmail and all of Pat's postings are coming to me as blank emails with her message contained in an attachment entitled ATTN (where N is a number). -- Alice [Original Message] From: Gary Templeman [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Date: 7/18/2007 12:56:49 AM Subject: Re: [LegacyUG] Changing email address Pat, If all the people who have had problems with some of your messages happen to be using Gmail, it is apparantly a problem at the Gmail end, not with anything you are doing. See http://mail.google.com/support/bin/answer.py?hl=enanswer=9524 Gary Templeman - Original Message - From: Pat H [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 7:28 PM Subject: Re: [LegacyUG] Changing emmail address Thanks for your responses. I'm using Outlook Express 6. I got one email at the old address today; the rest came to my new email address. I don't really understand the problem some of you are having with my emails and have no idea what could cause it. Pat H. - Original Message - From: Bruce Jones [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 2:00 AM Subject: Re: [LegacyUG] Changing emmail address Yes, I also see that situation. I am using Gmail as my email client. On 7/16/07, Susan Daily [EMAIL PROTECTED] wrote: Does anyone else get seemingly blank emails from Pat H with an attachment labeled noname? I always can see what is in the attached file by looking at the next person's reply, so guess it is a text file, but I never open it. Pat - what type of email program are you using? Just very curious why it would do this. Susan Daily Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Changing emmail address
I suspect most people on any list add the other e-mailers to their own list as a not-spam address. This may take a while for all the old-address mesasages to disappear forever. This happened when I switched provders for a few weeks. Your vendor should? make the old one bounce an 'address unknown' type message. I don't know if it is worth your time. It wasn't for me. I just let it die a long and agonizing death. Rich --- Pat H [EMAIL PROTECTED] wrote: I just received 8 new Legacy emails at the address I have unsubscribed from and 0 (ZERO) Legacy emails at the address I have subscribed to!! I do wish somebody would tell me what is going on!!! Both are with the same ISP. Pat - Original Message - From: Pat H [EMAIL PROTECTED] To: LegacyUserGroup LegacyUserGroup@legacyfamilytree.com Sent: Friday, July 13, 2007 10:35 PM Subject: [LegacyUG] Changing emmail address I have changed my email address in accord with the directions on the Legacy website. I am receiving emails at my new address BUT I am still getting a few at the OLD address. SO-O-O I went to the old website and attempte to unsubscribe AGAIN (for the 3rd time!) but I was told I couldn't do that as they didn't have that as an email address. Can someon kindly explain WHAT is going on??? Thanks!!! Pat H. E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07720 http://www.pctools.com/spyware-doctor/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07720 http://www.pctools.com/spyware-doctor/ E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07560 http://www.pctools.com/spyware-doctor/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Changing email address
Yours is a slightly different attachment name but possibly a similar problem. In looking at the properties of a number of messages to this list, Pat's have this line that no one else has (that I have seen): X-PCToolsMIME: Updated by PC Tools Mime Parser 1.0.0.4 The fact that her message is contained within that attachment is a sign that somewhere along the transmission, some software is intercepting the email and converting it to an attachment. I suspect it may have to do with spam filtering, as a common use of MIME parsing is to protect from potentially harmful emails. That MIME parsing is probably applied by her ISP. Her messages come in fine to me, so it is probably some difference in how your ISP and my ISP then treat the message after they get it. Same with Gmail. Gary - Original Message - From: Alice McVearry [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 4:02 AM Subject: Re: [LegacyUG] Changing email address Gary, I am not using Gmail and all of Pat's postings are coming to me as blank emails with her message contained in an attachment entitled ATTN (where N is a number). -- Alice [Original Message] From: Gary Templeman [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Date: 7/18/2007 12:56:49 AM Subject: Re: [LegacyUG] Changing email address Pat, If all the people who have had problems with some of your messages happen to be using Gmail, it is apparantly a problem at the Gmail end, not with anything you are doing. See http://mail.google.com/support/bin/answer.py?hl=enanswer=9524 Gary Templeman - Original Message - From: Pat H [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 7:28 PM Subject: Re: [LegacyUG] Changing emmail address Thanks for your responses. I'm using Outlook Express 6. I got one email at the old address today; the rest came to my new email address. I don't really understand the problem some of you are having with my emails and have no idea what could cause it. Pat H. - Original Message - From: Bruce Jones [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 2:00 AM Subject: Re: [LegacyUG] Changing emmail address Yes, I also see that situation. I am using Gmail as my email client. On 7/16/07, Susan Daily [EMAIL PROTECTED] wrote: Does anyone else get seemingly blank emails from Pat H with an attachment labeled noname? I always can see what is in the attached file by looking at the next person's reply, so guess it is a text file, but I never open it. Pat - what type of email program are you using? Just very curious why it would do this. Susan Daily Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] error 530
Before using such a service, I would rename the existing file and reinstall Legacy to see if that will put in and register the correct version. Another person has stated I just ran a search on XCeedZip.dll and found two copies, one in the Legacy\backup folder and the other in the \WINDOWS\system32 folder. Size, version and creation time for Legacy was 417 KB, 5.0.92.0 and 1/8/2007 4:59 PM, but for the system file it was 485KB, 6.0.6470.0 and 1/8/2007 5:09 PM. I would be reluctant to use the version 4.5.67.0 that that site will install. Straight reinstalls do not always update existing files, but renaming it will give Legacy the chance to start fresh. Gary Templeman - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 3:07 AM Subject: Re: [LegacyUG] error 530 Hi Ellaine, Following Sherry's comments on Xceedzip.dll, which is a dll I am not familiar with, I had to do some research! Yes, it would seem that it is possible for this dll to be taken over by a worm but if your AV and Spyware software is up to date and regularly run and show no problems this is unlikely. More likely is that you have downloaded some software which has installed a different version of this dll and it is either old or not installed properly (in any event I would not be too happy/confident in the software supplier). It is not possible just to exchange this dll for another version as it has to be installed on your computer and registered. Usually the registration will be done automatically during the installation and it maybe that this is where the problem arose. I suggest you run the free scan on this site http://www.dynamiclink.nl/htmfiles/rframes/info_dll/info_x/34.htm to see what they say about this dll on your computer. If you do need to replace it they charge around $13US. I do not know of a free version of this dll. They do state that they are offering the original producer's version and this is important. Although I have used this site myself for other things and found it to be reliable, I do emphasise that I cannot accept responsibility for the outcome and their service. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 19:04:28 -0400 Ron: Thanks for your reply Yes I am going into Legacy filebackup or filerestore. The computer has only been owned by myself - it is a Dell and is about three years old. Prior to just a week or so ago I was able to go into Legacy under file and create a backup and also go into file and click on restore a family file and it all worked fine. I save to varoius drives - D, a memory stick in E and F and of course C. Do you think this could be some sort of a virus? Ellaine Goodall E-mail: [EMAIL PROTECTED] - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 1:00 PM Subject: RE: [LegacyUG] error 530 Elaine, As has been said before this is usually a network error so could you clarify some points for me: When you say in para 2) restore a family file do you mean using FileRestore? When you try to save the back to what drive and folder is it being saved (in the box at the top)? Have you ever managed to back-up or restore using this Desk Top - is it a used one which has come from a company - have you only just obtained it? This error strongly suggests that the computer has previously been used on a network (or currently is) and you do not have the rights to use the back-up facilities. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 12:12:17 -0400 Dear Ron, Cathy, Jack and Legacy support: I have spent some time working with this error in the hopes that if I understand it better I can give to you good folks some helpful information: 1) The error appears when go into
[LegacyUG] exporting gedcom file
I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] error 530
We don't particularly disagree on thiis, the version I have in System32 btw is 6.0.6470.0 (Sept. 2006). The main points I was making was 1) it is worth doing the free check and 2) one cannot simply copy the dll from one place to another eg. from the lap-top to the Desk Top. Incidentally I have 3 copies as Ahead Nero use it (but call it Xceed.dll.nco) and have it in their folder in the application program. I also thought it was not good practice for programs to overwite System32 dlls. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Gary Templeman [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Wed, 18 Jul 2007 07:23:14 -0700 Before using such a service, I would rename the existing file and reinstall Legacy to see if that will put in and register the correct version. Another person has stated I just ran a search on XCeedZip.dll and found two copies, one in the Legacy\backup folder and the other in the \WINDOWS\system32 folder. Size, version and creation time for Legacy was 417 KB, 5.0.92.0 and 1/8/2007 4:59 PM, but for the system file it was 485KB, 6.0.6470.0 and 1/8/2007 5:09 PM. I would be reluctant to use the version 4.5.67.0 that that site will install. Straight reinstalls do not always update existing files, but renaming it will give Legacy the chance to start fresh. Gary Templeman - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 3:07 AM Subject: Re: [LegacyUG] error 530 Hi Ellaine, Following Sherry's comments on Xceedzip.dll, which is a dll I am not familiar with, I had to do some research! Yes, it would seem that it is possible for this dll to be taken over by a worm but if your AV and Spyware software is up to date and regularly run and show no problems this is unlikely. More likely is that you have downloaded some software which has installed a different version of this dll and it is either old or not installed properly (in any event I would not be too happy/confident in the software supplier). It is not possible just to exchange this dll for another version as it has to be installed on your computer and registered. Usually the registration will be done automatically during the installation and it maybe that this is where the problem arose. I suggest you run the free scan on this site http://www.dynamiclink.nl/htmfiles/rframes/info_dll/info_x/34.htm to see what they say about this dll on your computer. If you do need to replace it they charge around $13US. I do not know of a free version of this dll. They do state that they are offering the original producer's version and this is important. Although I have used this site myself for other things and found it to be reliable, I do emphasise that I cannot accept responsibility for the outcome and their service. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 19:04:28 -0400 Ron: Thanks for your reply Yes I am going into Legacy filebackup or filerestore. The computer has only been owned by myself - it is a Dell and is about three years old. Prior to just a week or so ago I was able to go into Legacy under file and create a backup and also go into file and click on restore a family file and it all worked fine. I save to varoius drives - D, a memory stick in E and F and of course C. Do you think this could be some sort of a virus? Ellaine Goodall E-mail: [EMAIL PROTECTED] - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 1:00 PM Subject: RE: [LegacyUG] error 530 Elaine, As has been said before this is usually a network error so could you clarify some points for me: When you say in para 2) restore a family file do you mean using FileRestore? When you try to save the back to what drive and folder is it being saved (in the box at the top)? Have you ever managed to back-up or
RE: [LegacyUG] Changing emmail address
Pat, We're having some problems. I'll forward this to Ken to take a look at - he's handling the subscription list problems. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pat H Sent: Wednesday, July 18, 2007 12:22 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Changing emmail address I just received 8 new Legacy emails at the address I have unsubscribed from and 0 (ZERO) Legacy emails at the address I have subscribed to!! I do wish somebody would tell me what is going on!!! Both are with the same ISP. Pat - Original Message - From: Pat H [EMAIL PROTECTED] To: LegacyUserGroup LegacyUserGroup@legacyfamilytree.com Sent: Friday, July 13, 2007 10:35 PM Subject: [LegacyUG] Changing emmail address I have changed my email address in accord with the directions on the Legacy website. I am receiving emails at my new address BUT I am still getting a few at the OLD address. SO-O-O I went to the old website and attempte to unsubscribe AGAIN (for the 3rd time!) but I was told I couldn't do that as they didn't have that as an email address. Can someon kindly explain WHAT is going on??? Thanks!!! Pat H. E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07720 http://www.pctools.com/spyware-doctor/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07720 http://www.pctools.com/spyware-doctor/ E-mail message checked by PC Tools Spyware Doctor (5.0.0.186) Database version: 5.07560 http://www.pctools.com/spyware-doctor/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] exporting gedcom file
Kelly, Firstly, it is not possible for a person to appear on a Gedcom if they are not in your files. So I suggest you check the Index to see if that person is still there - you may have had a duplicate. WRT exporting a Gedcom; when exporting have you looked under the Customise button to see what you are actually exporting? Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@LegacyFamilyTree.com Subject: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 08:10:15 -0700 (PDT) I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp _ Watch all 9 Live Earth concerts live on MSN. http://liveearth.uk.msn.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] exporting gedcom file
Kelly, Try running FileFile MaintenanceCheck/Repair and the create your Gedcom again and let us know the result. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 09:17:10 -0700 (PDT) That name does not show up on the Index either. I am exporting the gedcom to a dna site. The gedcom file is set to default, when I look at customize the death dates should show up. It has almost all data on death dates of other people. But the newer info just isn't showing up. (about two names I've noticed) This is how I did it, export to gedcom file, then Ive tried export to Gedcom 5.5 file only, with character set to Ansi (default), no boxes are checked, at the bottom it has ALL records in the Entire Family File. I cannot figure out what I am doing wrong. Kelly - Original Message From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 10:45:04 AM Subject: RE: [LegacyUG] exporting gedcom file Kelly, Firstly, it is not possible for a person to appear on a Gedcom if they are not in your files. So I suggest you check the Index to see if that person is still there - you may have had a duplicate. WRT exporting a Gedcom; when exporting have you looked under the Customise button to see what you are actually exporting? Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@LegacyFamilyTree.com Subject: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 08:10:15 -0700 (PDT) I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly _ Watch all 9 Live Earth concerts live on MSN. http://liveearth.uk.msn.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] exporting gedcom file
Well I decided to import the files I had from Ancestry.com When I tried to merge the files with what I had, I lost everything. So what I did is create a new file to Legacy for that. So it is up to date. I just wonder if it will act up in the future as I update it. Time will tell. Thank you so much for trying to help me. Kelly - Original Message From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 11:45:38 AM Subject: Re: [LegacyUG] exporting gedcom file Kelly, Try running FileFile MaintenanceCheck/Repair and the create your Gedcom again and let us know the result. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 09:17:10 -0700 (PDT) That name does not show up on the Index either. I am exporting the gedcom to a dna site. The gedcom file is set to default, when I look at customize the death dates should show up. It has almost all data on death dates of other people. But the newer info just isn't showing up. (about two names I've noticed) This is how I did it, export to gedcom file, then Ive tried export to Gedcom 5.5 file only, with character set to Ansi (default), no boxes are checked, at the bottom it has ALL records in the Entire Family File. I cannot figure out what I am doing wrong. Kelly - Original Message From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 10:45:04 AM Subject: RE: [LegacyUG] exporting gedcom file Kelly, Firstly, it is not possible for a person to appear on a Gedcom if they are not in your files. So I suggest you check the Index to see if that person is still there - you may have had a duplicate. WRT exporting a Gedcom; when exporting have you looked under the Customise button to see what you are actually exporting? Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@LegacyFamilyTree.com Subject: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 08:10:15 -0700 (PDT) I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly _ Watch all 9 Live Earth concerts live on MSN. http://liveearth.uk.msn.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit:
RE: [LegacyUG] Legacy Vista
Hi, I have done hte same thing you have done with a new laptop. Did you get an answer of what to do? [EMAIL PROTECTED] From: [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Legacy Vista Date: Fri, 13 Jul 2007 19:01:44 EDT I just purchased a laptop computer - with Windows Vista. My desk-top has Windows XP. I have Legacy Deluxe (which means I have all the features and a customer #). What I want to do is copy my Legacy programme and all the relevant files to my laptop (keeping the original on the desktop). When this is accomplished - I'll be able to take the laptop to the main library (here in Columbus, OH), or to a historical centre, etc. and in-put new data immediately. Which is better to do... copy everything onto a jump drive (I have one that holds 2GB) and down-load it onto the laptop OR down-load the programme from the disc that came with the manual and then down-load from the Legacy website the up-date(s)??? Note that I am on dial-up and down-loading from the internet is going to be quite time consuming. Also, will I be able to down-load the programme from the internet without buying it again (in short - enter my customer # somewhere)? Any help is and will be greatly appreciated... Happy hunting... Pami Taylor ** Get a sneak peak of the all-new AOL at http://discover.aol.com/memed/aolcom30tour Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Legacy Vista
I may have missed the original post with this one, but I too recently purchased a laptop with Vista. I had no problems with Legacy. I downloaded a fresh Legacy onto the laptop, added my customer information then restored my file from the backup. I have had no problems. If you transfer files rather than 'restore backup' you could run into problems. I have done hte same thing you have done with a new laptop. Did you get an answer of what to do? [EMAIL PROTECTED] From: [EMAIL PROTECTED] Date: Fri, 13 Jul 2007 19:01:44 EDT I just purchased a laptop computer - with Windows Vista. My desk-top has Windows XP. I have Legacy Deluxe (which means I have all the features and a customer #). What I want to do is copy my Legacy programme and all the relevant files to my laptop (keeping the original on the desktop). -- Anne PICKETTS Waipu, NZ Researching: LEADBEATER, SMITH, WASHINGTON, BARKER, SHEPHERD, PEARSON, ROBINSON, GILL, HARRIS, FISH, SUTTON in YKS and CBL Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] exporting gedcom file
Am I interpreting correctly that you are exporting to GEDCOM and then uploading to something like Ancestry.com and then checking the Ancestry.com reports and find discrepencies between that and your Legacy file? If so, have you looked at the GEDCOM before uploading it. I'm willing to bet it is fine and that the problem is that it may take time for your new data to become viewable from Ancestry.com. That name does not show up on the Index either. I am exporting the gedcom to a dna site. The gedcom file is set to default, when I look at customize the death dates should show up. It has almost all data on death dates of other people. But the newer info just isn't showing up. (about two names I've noticed) This is how I did it, export to gedcom file, then Ive tried export to Gedcom 5.5 file only, with character set to Ansi (default), no boxes are checked , at the bottom it has ALL records in the Entir e Family File. I cannot figure out what I am doing wrong. Kelly - Original Message From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 10:45:04 AM Subject: RE: [LegacyUG] exporting gedcom file Kelly, Firstly, it is not possible for a person to appear on a Gedcom if they are not in your files. So I suggest you check the Index to see if that person is still there - you may have had a duplicate. WRT exporting a Gedcom; when exporting have you looked under the Customise button to see what you are actually exporting? Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@LegacyFamilyTree.com Subject: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 08:10:15 -0700 (PDT) I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp _ Watch all 9 Live Earth concerts live on MSN. http://liveearth.uk.msn.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User
Re: [LegacyUG] On this date...
Regarding this suggestion, and also a similar one that I believe came in yesterday: Nancy, I had sent in a suggested enhancement for this, and this was the reply from Sherry: At this time, the way the dates are formatted in the background that you can't see, it's not possible to search on a partial date. The programmers realize that users would like to do this and I hope they can eventually figure out how to add such a search. So for now, we can't do this, even though it could be a neat feature. Susan I don't have the option to try this at present because I have just moved to a new computer, but you should be able to do this in Access if you have it. Without knowing the internal format Legacy uses for partial dates, I can't say specifically, but you should be able to use conversion functions to pull the month and day out of the stored dates and sort or search on those. This may require converting them to character data first, or pulling the month and date out as numeric values and then reassembling them in either numeric or character format, but it should be possible. If anyone has specific questions on how to do this, I will be glad to try to help. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] exporting gedcom file
No I sent it to Family Tree DNA. It will let you upload the whole file, then you can check the name list, or save it and then check the family tree by viewing it after it was saved. This is really strange. Thanks to all who have helped me! Kelly - Original Message From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 3:19:45 PM Subject: Re: [LegacyUG] exporting gedcom file Am I interpreting correctly that you are exporting to GEDCOM and then uploading to something like Ancestry.com and then checking the Ancestry.com reports and find discrepencies between that and your Legacy file? If so, have you looked at the GEDCOM before uploading it. I'm willing to bet it is fine and that the problem is that it may take time for your new data to become viewable from Ancestry.com. That name does not show up on the Index either. I am exporting the gedcom to a dna site. The gedcom file is set to default, when I look at customize the death dates should show up. It has almost all data on death dates of other people. But the newer info just isn't showing up. (about two names I've noticed) This is how I did it, export to gedcom file, then Ive tried export to Gedcom 5.5 file only, with character set to Ansi (default), no boxes are checked , at the bottom it has ALL records in the Entir e Family File. I cannot figure out what I am doing wrong. Kelly - Original Message From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 10:45:04 AM Subject: RE: [LegacyUG] exporting gedcom file Kelly, Firstly, it is not possible for a person to appear on a Gedcom if they are not in your files. So I suggest you check the Index to see if that person is still there - you may have had a duplicate. WRT exporting a Gedcom; when exporting have you looked under the Customise button to see what you are actually exporting? Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@LegacyFamilyTree.com Subject: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 08:10:15 -0700 (PDT) I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp _ Watch all 9 Live Earth concerts live on MSN. http://liveearth.uk.msn.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives
RE: [LegacyUG] exporting gedcom file
Still, I would check the GEDCOM before you upload to confirm whether it's your GEDCOM that is strange or the one your viewing on Family Tree DNA. C.G. Ouimet Kingston, ON -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kelly L Sent: Wednesday, July 18, 2007 18:44 To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] exporting gedcom file No I sent it to Family Tree DNA. It will let you upload the whole file, then you can check the name list, or save it and then check the family tree by viewing it after it was saved. This is really strange. Thanks to all who have helped me! Kelly - Original Message From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 3:19:45 PM Subject: Re: [LegacyUG] exporting gedcom file Am I interpreting correctly that you are exporting to GEDCOM and then uploading to something like Ancestry.com and then checking the Ancestry.com reports and find discrepencies between that and your Legacy file? If so, have you looked at the GEDCOM before uploading it. I'm willing to bet it is fine and that the problem is that it may take time for your new data to become viewable from Ancestry.com. That name does not show up on the Index either. I am exporting the gedcom to a dna site. The gedcom file is set to default, when I look at customize the death dates should show up. It has almost all data on death dates of other people. But the newer info just isn't showing up. (about two names I've noticed) This is how I did it, export to gedcom file, then Ive tried export to Gedcom 5.5 file only, with character set to Ansi (default), no boxes are checked , at the bottom it has ALL records in the Entir e Family File. I cannot figure out what I am doing wrong. Kelly - Original Message From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 10:45:04 AM Subject: RE: [LegacyUG] exporting gedcom file Kelly, Firstly, it is not possible for a person to appear on a Gedcom if they are not in your files. So I suggest you check the Index to see if that person is still there - you may have had a duplicate. WRT exporting a Gedcom; when exporting have you looked under the Customise button to see what you are actually exporting? Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Kelly L [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@LegacyFamilyTree.com Subject: [LegacyUG] exporting gedcom file Date: Wed, 18 Jul 2007 08:10:15 -0700 (PDT) I am having a problem with trying to export a file. When I do an export to a gedcom file, not all the data goes with it. Some data I thought was deleted, was still there when I sent the gedcom. I need to straighten this out. (I deleted that person on the pedigree page, but they are still showing up in gedcom) In particular I have updated info on two women. (death dates and places) But when I look at the gedcom export, it is not right. Just the birth dates are there, no death date. Even though I can see it on Pedigree page. (on the tree itself) I am new to genealogy software, so any help would be appreciated. Kelly Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp _ Watch all 9 Live Earth concerts live on MSN. http://liveearth.uk.msn.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit:
Re: [LegacyUG] error 530
To All Of You Kind People: I want to thanks all of you who took the time to help me with my error 530 problem.. I have printed out all of your good suggestions which I am giving to a friend of mine who is much more computer knowledgeable than I am and will be able to understand what you good folks are talking about (which I do Not have the ability to do ) and he will come over and apply what you have suggested. I will let the group know if we solve the problem and what worked. In the meantime, I always have my laptop with a working Legacy program which I just could not possibly do without as I love it so!!! Ellaine Goodall E-mail: [EMAIL PROTECTED] - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 11:38 AM Subject: Re: [LegacyUG] error 530 We don't particularly disagree on thiis, the version I have in System32 btw is 6.0.6470.0 (Sept. 2006). The main points I was making was 1) it is worth doing the free check and 2) one cannot simply copy the dll from one place to another eg. from the lap-top to the Desk Top. Incidentally I have 3 copies as Ahead Nero use it (but call it Xceed.dll.nco) and have it in their folder in the application program. I also thought it was not good practice for programs to overwite System32 dlls. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Gary Templeman [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Wed, 18 Jul 2007 07:23:14 -0700 Before using such a service, I would rename the existing file and reinstall Legacy to see if that will put in and register the correct version. Another person has stated I just ran a search on XCeedZip.dll and found two copies, one in the Legacy\backup folder and the other in the \WINDOWS\system32 folder. Size, version and creation time for Legacy was 417 KB, 5.0.92.0 and 1/8/2007 4:59 PM, but for the system file it was 485KB, 6.0.6470.0 and 1/8/2007 5:09 PM. I would be reluctant to use the version 4.5.67.0 that that site will install. Straight reinstalls do not always update existing files, but renaming it will give Legacy the chance to start fresh. Gary Templeman - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 3:07 AM Subject: Re: [LegacyUG] error 530 Hi Ellaine, Following Sherry's comments on Xceedzip.dll, which is a dll I am not familiar with, I had to do some research! Yes, it would seem that it is possible for this dll to be taken over by a worm but if your AV and Spyware software is up to date and regularly run and show no problems this is unlikely. More likely is that you have downloaded some software which has installed a different version of this dll and it is either old or not installed properly (in any event I would not be too happy/confident in the software supplier). It is not possible just to exchange this dll for another version as it has to be installed on your computer and registered. Usually the registration will be done automatically during the installation and it maybe that this is where the problem arose. I suggest you run the free scan on this site http://www.dynamiclink.nl/htmfiles/rframes/info_dll/info_x/34.htm to see what they say about this dll on your computer. If you do need to replace it they charge around $13US. I do not know of a free version of this dll. They do state that they are offering the original producer's version and this is important. Although I have used this site myself for other things and found it to be reliable, I do emphasise that I cannot accept responsibility for the outcome and their service. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 19:04:28 -0400 Ron: Thanks for your reply Yes I am going into Legacy filebackup or filerestore. The computer has only been owned by myself - it is a Dell and is about three years
Re: [LegacyUG] error 530
Ellaine Goodall E-mail: [EMAIL PROTECTED] - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 11:38 AM Subject: Re: [LegacyUG] error 530 We don't particularly disagree on thiis, the version I have in System32 btw is 6.0.6470.0 (Sept. 2006). The main points I was making was 1) it is worth doing the free check and 2) one cannot simply copy the dll from one place to another eg. from the lap-top to the Desk Top. Incidentally I have 3 copies as Ahead Nero use it (but call it Xceed.dll.nco) and have it in their folder in the application program. I also thought it was not good practice for programs to overwite System32 dlls. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Gary Templeman [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Wed, 18 Jul 2007 07:23:14 -0700 Before using such a service, I would rename the existing file and reinstall Legacy to see if that will put in and register the correct version. Another person has stated I just ran a search on XCeedZip.dll and found two copies, one in the Legacy\backup folder and the other in the \WINDOWS\system32 folder. Size, version and creation time for Legacy was 417 KB, 5.0.92.0 and 1/8/2007 4:59 PM, but for the system file it was 485KB, 6.0.6470.0 and 1/8/2007 5:09 PM. I would be reluctant to use the version 4.5.67.0 that that site will install. Straight reinstalls do not always update existing files, but renaming it will give Legacy the chance to start fresh. Gary Templeman - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 3:07 AM Subject: Re: [LegacyUG] error 530 Hi Ellaine, Following Sherry's comments on Xceedzip.dll, which is a dll I am not familiar with, I had to do some research! Yes, it would seem that it is possible for this dll to be taken over by a worm but if your AV and Spyware software is up to date and regularly run and show no problems this is unlikely. More likely is that you have downloaded some software which has installed a different version of this dll and it is either old or not installed properly (in any event I would not be too happy/confident in the software supplier). It is not possible just to exchange this dll for another version as it has to be installed on your computer and registered. Usually the registration will be done automatically during the installation and it maybe that this is where the problem arose. I suggest you run the free scan on this site http://www.dynamiclink.nl/htmfiles/rframes/info_dll/info_x/34.htm to see what they say about this dll on your computer. If you do need to replace it they charge around $13US. I do not know of a free version of this dll. They do state that they are offering the original producer's version and this is important. Although I have used this site myself for other things and found it to be reliable, I do emphasise that I cannot accept responsibility for the outcome and their service. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *New Site, New Blog!* Create Legacy Web Pages Trilogy! View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: Ellaine Goodall [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] error 530 Date: Tue, 17 Jul 2007 19:04:28 -0400 Ron: Thanks for your reply Yes I am going into Legacy filebackup or filerestore. The computer has only been owned by myself - it is a Dell and is about three years old. Prior to just a week or so ago I was able to go into Legacy under file and create a backup and also go into file and click on restore a family file and it all worked fine. I save to varoius drives - D, a memory stick in E and F and of course C. Do you think this could be some sort of a virus? Ellaine Goodall E-mail: [EMAIL PROTECTED] - Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, July 17, 2007 1:00 PM Subject: RE: [LegacyUG] error 530 Elaine, As has been said before this is usually a network error so could you clarify some
Re: [LegacyUG] Idea--an .fdb for background info? Plus book question.
Hi Pat, Well you can intersperse background information with family data - it just depends how you want to do that. If you use the Book publishing option within the Legacy Publication Centre, you could either insert some of this background info (even generated from your unique background file if any of the reports work) as Special Text Entries or Reserve pages for other information. This means that the page numbers don't get mixed up but the pages wouldn't be indexed. If you want a complete PDF book, you'd need to use the Special Text Entries rather than reserving pages unless you own a PDF editor and could insert them later. The alternative is to use the Rich Text options and edit that in your Word Processor and generate the indexes in the Word Processor at the end. You could then add index entries for the additions if you know how. Personally I haven't the patience to take a Legacy book and edit it in a Word Processor as I like to include pictures and although you can embed the pics in an RTF file, they don't come over in consistent size and placing so it's a lot of work. I hate working with pics in MS Word. Cheers, Cathy At 10:44 AM 18/07/2007, you wrote: I originally had the two databases combined but separated them for some reason. Perhaps in part because I had two unrelated Price families and that was a nuisance. There is almost no overlap between the two families, I am an only child with no children of my own so I think that keeping them separate will work very well for me. Since I can't make a book from two databases, I think when the time comes I'll just transfer info from the background file into the notes section for a particular individual. Still it seems to me one ought to be able to intersperse background info with family data. Actually the only problem comes with page numbering, table of contents and indexing. I guess I'll cross those bridges when I get to them! Thanks for your comments! Pat - Original Message - From: hwedhlor [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Monday, July 16, 2007 10:39 PM Subject: Re: [LegacyUG] Idea--an .fdb for background info? Plus book question. Hi Pat, I'm a newcomer to the Legacy environment, but have been a researcher for 40 years, and have worked with computers since 1965. The issue of keeping separate paternal, and maternal databases has cropped up many times, and is almost always a habit carried over from when genealogical records were kept on paper. Computers can easily keep track of such distinctions, so why go to all the trouble of keeping separate databases? Our descendants will only combine the two databases after we're gone anyway. G John Zimmerman Mesa, Arizona Cathy wrote: Hi Pat, That's an interesting idea - a database for background info. However, I think for incorporation into a book, your background information would have to be handled differently - like in the notes to locations or attached to key individuals. But for reference, your idea sounds good and obviously works for you. Re combining two separate databases in a book That's why I and many others suggest you have only one family file that includes all your family. It's much easier to split a file for specific purposes than it is to combine files. It's also far easier to make sure that one database is updated than two overlapping databases. Maybe it's time you combined your paternal and maternal databases. Cathy At 12:16 AM 17/07/2007, you wrote: I'm trying something new (for me): In addition to my two main family databases (paternal, maternal), I've added two databases for background info for the two families (one for each line): for example town, county, or church histories, geographical information, etc. Of course, most of the information I enter goes into the Notes section. Ordinarily I enter a new subject by clicking Add, New unlinked individual. Sometimes, however, I have a state as the father and towns, independent cities and counties as children. I like having the background info readily available -- and used to put it in under an individual -- but couldn't always remember WHICH individual! And it's so handy just to click View Name and see all the topics available. I'm not sure I'm expaining this clearly, but I'd love to have any thoughts/ideas/suggestions about how you handle background info. Also, a related question -- when printing a book from Legacy, is it possible to combine two separate databases in any way? Pat H. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at:
Re: [LegacyUG] error 530
- Original Message - From: ronald ferguson [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, July 18, 2007 8:38 AM Subject: Re: [LegacyUG] error 530 We don't particularly disagree on thiis, the version I have in System32 btw is 6.0.6470.0 (Sept. 2006). The main points I was making was 1) it is worth doing the free check and 2) one cannot simply copy the dll from one place to another eg. from the lap-top to the Desk Top. Unless you know how to properly use regsvr32 Incidentally I have 3 copies as Ahead Nero use it (but call it Xceed.dll.nco) and have it in their folder in the application program. I also thought it was not good practice for programs to overwite System32 dlls. Ron Ferguson There are a lot of programs that do things that are not good practice. There are recent reports that installing Legacy breaks the Inventory Manager program used at Family History Centers, requiring a workaround. A version of Legacy in 2003 ago did the same thing to IM, installing a version of XCeedZip.dll that was incompatible. The IM people had to issue a fix. I don't know if the current Legacy/IM problem is due to the same file conflict, but I wouldn't be surprised. Gary Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Web Page Creation- and associated problems
Thanks very much for your thoughts Susan. It will help me in making my decision and I will follow your guide lines. Regards from Valerie in sunny Sydney. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Susan Daily Sent: Wednesday, 18 July 2007 4:53 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Web Page Creation- and associated problems Valerie, When you export a GEDCOM with Legacy, you can have it withhold notes from the export. Then you can put up just the facts online at a site like Rootsweb's free WorldConnect. I actually have Legacy export all my info, and then choose the options at WorldConnect to not publish Living people, and no notes nor sources. I am contacted at least once a month by people who find their relatives in my tree. Sometimes I am able to connect them to others who have contacted me (this actually happened today), who are more closely related to them. By not having notes and sources online, I eliminate the possibility of someone copying that info into their own databases. I don't mind them copying dates and events, since that is info they could find on their own. When I am contacted by email, I usually ask for info and ask for permission to include it in my Legacy family tree file, using them as the source. But I tell them that I do not show my sources online, so they need to understand that. In fact my tree introduction says Most items are sourced. Please email me for complete notes and sources. After they send me info, I usually then send them a Legacy Descendants Book report in a PDF file so that they can't just copy and paste (unless they are very clever or own the expensive Adobe software but odds are very low). I only select the number of generations that lists all deceased persons, so that I don't send any private info for living persons. This descendants report includes all my sources and notes, but I feel that is a fair trade to someone who has usually exhibited a willingness to share info, including their mother's maiden name and their birthdate. The sources will help them find the info on their own, if they so desire. I hope this helps provide you (and the list) with some ideas. Susan Daily On 7/16/07, Valeris Garton [EMAIL PROTECTED] wrote: I have been hesitant in putting any more info on the web as: 1. I gave some info out once which was added to his web site with my name as the supplier of the information BUT he got it all wrong and numerous requests that he fix the information have been ignored. 2. I have also had a relative, a young person, take my info off the web and supply it as his own with no reference to myself. I know that it was my info as there were references that could have only come from myself. 3. I have also found that info that I have given to someone in an e-mail has been taken by another person and used as their own. Any comments or suggestions please ? Regards from Valerie in sunny Sydney. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Web Page Creation- and associated problems
Thanks for your comments Alice. It will help me in making my decision. Where did you put your information please ? Regards from Valerie in sunny Sydney. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alice Hawrilenko Sent: Wednesday, 18 July 2007 2:51 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Web Page Creation- and associated problems Valerie, I have been struggling with this same issue lately. Many of us make breakthroughs in our research only after spending years and lots of travel money. In my case however I have been lead to those breakthroughs because others have been willing to give me information I would never have found on my own. I have finally come to the realization that I cannot control what happens to my information once I throw it out there and while I am saddened and occasionally angered when I see the occasional case of plagiarism or the careless disregard for facts as presented I understand that in the end I have gotten so much more out of my work of research than a simple list of names and dates. That something more- the new people, the new information the new understandings that I have come to in the process of doing the work are what really matter. I have seen incredibly beautiful sections of this country that I would never have experienced if I didn't love doing genealogy. Those are the things no one can steal or change! Try asking the person who has garbled your information to at least remove your name from his website as what he is representing as your work is not in fact your work. It's a work of fiction if the facts are wrong and he should promote it as such. Alice - Original Message - From: Valeris Garton [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Monday, July 16, 2007 9:16 PM Subject: RE: [LegacyUG] Web Page Creation- and associated problems I have been hesitant in putting any more info on the web as: 1. I gave some info out once which was added to his web site with my name as the supplier of the information BUT he got it all wrong and numerous requests that he fix the information have been ignored. 2. I have also had a relative, a young person, take my info off the web and supply it as his own with no reference to myself. I know that it was my info as there were references that could have only come from myself. 3. I have also found that info that I have given to someone in an e-mail has been taken by another person and used as their own. Any comments or suggestions please ? Regards from Valerie in sunny Sydney. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Saba K Sent: Friday, 13 July 2007 3:33 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Web Page Creation Hi Kane, You will find a lot of useful information if you search the archives of this mailing list. In addition, an excellent resource for web site creation using Legacy is the Yahoo Group created by Legacy Users where a lot of general web site creation, HTML related issues are discussed. You should consider joining that group and posing your question there. The Yahoo Group is at http://uk.groups.yahoo.com/group/WUL/ Regards, Saba From: Wendy Howard [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Web Page Creation Date: Fri, 13 Jul 2007 15:49:41 +1200 Hi Kane, It might help if you tell us the URL to your web site (for example, as I've given mine in my signature below), so that those who are knowledgeable in these things can take a look and see what they can see, and offer some advice. :-) Kind Regards, Wendy Howard -- Kaiwaka, Northland, New Zealand http://freepages.genealogy.rootsweb.com/~wendyh65/ http://freepages.genealogy.rootsweb.com/%7Ewendyh65/ - Original Message - *From:* Kane Scott [EMAIL PROTECTED] *To:* LegacyUserGroup@legacyfamilytree.com *Sent:* 07/13/2007 1:58:44 PM +1200 *Subject:* [LegacyUG] Web Page Creation I created a web page with legacy. It works well from the browser. Seems to upload properly to my ISP but when I access it there are some problems. The graphics (bullets) do not appear, pictures do not appear, and the links no longer work. I'd appreciate the input. No doubt I'm making a simple error. Thanks all ! Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit:
[LegacyUG] Training disks
Is it possible to purchase these in Sydney or Australia please ? Regards from Valerie in sunny Sydney. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] New User Problems
Thanks for these comments Leo. I can see that I need to spend some time learning about this search function. Regards from Valerie in sunny Sydney. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of leo macdonald Sent: Tuesday, 17 July 2007 12:31 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] New User Problems My perfered method of dealing with nicknames is to list their nickname in the notes for that person. If I had a person called John Robert Daniel Smith and his nickname is Dan, then in the notes section for this person I just enter the following: John Robert Daniel's nickname is Dan. If I want to find a list of everyone called Dan I would go to: searchfind: look for whom: individulewhere to look: notes-generalhow to look: containswhat to look for: nickname second conditionand: look for whom: individulewhere to look: notes-generalhow to look: containswhat to look for: Dan Select clear list before search then click create list. This will create a list of all individuals in my file who have the nickname Dan that I'm aware off. Leo Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Web Page Creation- and associated problems
Susan, If I'm not mistaken, the following is the quote from your message or I think it was your message: LOL After they send me info, I usually then send them a Legacy Descendants Book report in a PDF file so that they can't just copy and paste (unless they are very clever or own the expensive Adobe software but odds are very low). I just opened a .pdf Legacy report and right clicked and was able to copy and paste with no trouble. One other way I on your website, include a script that disables the right click. I did that on my regular website but not on my site at Roots Web. However, I am also one that suppresses the Living and I also include no sources and no notes. I enjoy reading your postings. Paul What a glorious world God Almighty has given us. How thankless and ungrateful we are, and how we labor to mar His gifts. ~ Gen. Robert E. Lee, CSA Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp