[LegacyUG] Cannot unsubscribe
Hi Has anyone had trouble getting onto the website for Family Tree today. I have tried numerous times and cannot subscribe or even get onto the website. Thanks for any replies. Ta Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Filter for location details
Yes, I got it to work. I had to do two searches, the 1st one and then filter it out of the search list only. I needed to ask for Burial and Death place blank on the second query for it to work properly. Thank you all heaps for your fantatic help. Cheers Gwen On 8/09/2009, at 7:51 PM, glove wrote: What happens if you choose Birth place contains Doncaster? Graham -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of noddie Sent: 08 September 2009 07:38 To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Filter for location details Hi and thank you to everyone who emailed regarding my search query. Totally appreciated. I tried the suggestions and it just brings up no records, and I know I have heaps. Uu what to do now Regards Gwen On 8/09/2009, at 1:34 PM, Angela Gabbard wrote: Go to the search page> detailed search page Individual death place equal to blank then check AND (2nd condition) Individual birth place equal to doncaster -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of noddie Sent: Monday, September 07, 2009 7:07 PM To: Legacy user group Subject: [LegacyUG] Filter for location details Hi everyone I am trying to do a search, filter for anyone who is born in Doncaster who has no death or burial details./ I did this: Individual Death place Equal to blank This works however it also picks up everyone born in different place so I have a large search list of people. What could I use as a second condition to filter this out better so I only find the following Anyone born/christened in Doncaster and Anyone who does not have information in the Death/Burial place Thanks heaps for any help with this. I am a little confused how it should work. Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Filter for location details
Hi and thank you to everyone who emailed regarding my search query. Totally appreciated. I tried the suggestions and it just brings up no records, and I know I have heaps. Uu what to do now Regards Gwen On 8/09/2009, at 1:34 PM, Angela Gabbard wrote: Go to the search page> detailed search page Individual death place equal to blank then check AND (2nd condition) Individual birth place equal to doncaster -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of noddie Sent: Monday, September 07, 2009 7:07 PM To: Legacy user group Subject: [LegacyUG] Filter for location details Hi everyone I am trying to do a search, filter for anyone who is born in Doncaster who has no death or burial details./ I did this: Individual Death place Equal to blank This works however it also picks up everyone born in different place so I have a large search list of people. What could I use as a second condition to filter this out better so I only find the following Anyone born/christened in Doncaster and Anyone who does not have information in the Death/Burial place Thanks heaps for any help with this. I am a little confused how it should work. Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Filter for location details
Hi everyone I am trying to do a search, filter for anyone who is born in Doncaster who has no death or burial details./ I did this: Individual Death place Equal to blank This works however it also picks up everyone born in different place so I have a large search list of people. What could I use as a second condition to filter this out better so I only find the following Anyone born/christened in Doncaster and Anyone who does not have information in the Death/Burial place Thanks heaps for any help with this. I am a little confused how it should work. Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] How to do a direct line report
Hi I am sure this has been covered on the forum, and if so I apologize. I am wanting to do a direct line only report or printout so I can see which of my main descendants I can target for missing information. Is this possible and how would I easily go about it. Thanks heaps for any help Regards Gwen Land of the long white cloud - New Zealand
Re: [LegacyUG] Descendants narrative report query
Hi John It appears to me that you are right, and that is why he appears twice and when remarried but not to a sister it only appears once. Guess there is nothing that can be done, but it just wastes space and makes the report a little confusing. Thanks for your time with this truly appreciated as it is with everyone that has replied. Regards Gwen Land of the long white cloud - New Zealand On 28/08/2009, at 11:35 AM, John S. Adams wrote: Gwen, It looks to me that the starting person for the report is an ancestor of the sisters. Therefore, each sister appears as a descendant and the husband would appear twice (once as the husband of each of the sisters) and so would his information. If the starting person was an ancestor of the husband, he would appear just once and so would his information. Also, in the case of a man married twice to non-sisters, only one of the wives would be a descendant and the other wife would not be mentioned. I'd have to do a little experimenting to try all the variables of family relationships, so your situation might be something else. Hope this helps. John S. Adams Hermosa Beach, CA -- From: "Noddie" <7thw...@ihug.co.nz> Sent: Thursday, August 27, 2009 3:24 PM To: Subject: Re: [LegacyUG] Descendants narrative report query Hi Ron and thank you for your reply to my query. I understand your answer and believe Legacy is working fine for me. What I cannot come to grips with is I have a similar situation (though they are not sisters this time) in the same family where another brother married twice but his Noted events only show up with one spouse and I have not changed any of the settings to make this appear otherwise.? Weird. Thanks again Gwen Land of the long white cloud - New Zealand On 27/08/2009, at 7:55 PM, ronald ferguson wrote: Gwen, As I understand your question, I believe that Legacy is acting correctly, and in a way which I would wish. If I go to either of the sisters then I would expect to see her husband's details, if they are only set for one sister then how would I know which, indeed would I even know that they are with the other, if they are not there? You can minimise what is shown by unchecking "show spouses notes"but do note that this would apply to all spouses. Ron Ferguson _ Tutorials: Programme of adding videos commenced http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ To: LegacyUserGroup@legacyfamilytree.com From: 7thw...@ihug.co.nz Subject: [LegacyUG] Descendants narrative report query Date: Thu, 27 Aug 2009 17:06:07 +1200 Hi I have created a descendants narrative report for my relative. I checked the detail and find on the following pages I have duplicated information which I believe is not correct. I have a chap who married two sisters, the 2nd after the first sister died. I have events entered for this chap, but am finding on my report and it is only with him, that the events for :Noted events in his life: are printing out twice. Once for his entry for his 1st wife and then again for the entry with his 2nd wife (her sister). I have other relatives who have been married twice and this does seem to happen with them. Have I pushed some magic button and made it appear twice by mistake. I do hope someone can help with this as I have checked my settings and cannot find an answer. In the options for the report under include I have ticked Events for husband and wife Events for marriage Notes all of these options are ticked I have tried unchecking events for husband and wife and events for marriage alternatively and this does not fix the problem Thanks for any kind help with this. Ta Gwen Land of the long white cloud - New Zealand _ Windows Live Messenger: Celebrate 10 amazing years with free winks and emoticons. http://clk.atdmt.com/UKM/go/157562755/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guideline
Re: [LegacyUG] Descendants narrative report query
Hi Ron and thank you for your reply to my query. I understand your answer and believe Legacy is working fine for me. What I cannot come to grips with is I have a similar situation (though they are not sisters this time) in the same family where another brother married twice but his Noted events only show up with one spouse and I have not changed any of the settings to make this appear otherwise.? Weird. Thanks again Gwen Land of the long white cloud - New Zealand On 27/08/2009, at 7:55 PM, ronald ferguson wrote: Gwen, As I understand your question, I believe that Legacy is acting correctly, and in a way which I would wish. If I go to either of the sisters then I would expect to see her husband's details, if they are only set for one sister then how would I know which, indeed would I even know that they are with the other, if they are not there? You can minimise what is shown by unchecking "show spouses notes"but do note that this would apply to all spouses. Ron Ferguson _ Tutorials: Programme of adding videos commenced http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ To: LegacyUserGroup@legacyfamilytree.com From: 7thw...@ihug.co.nz Subject: [LegacyUG] Descendants narrative report query Date: Thu, 27 Aug 2009 17:06:07 +1200 Hi I have created a descendants narrative report for my relative. I checked the detail and find on the following pages I have duplicated information which I believe is not correct. I have a chap who married two sisters, the 2nd after the first sister died. I have events entered for this chap, but am finding on my report and it is only with him, that the events for :Noted events in his life: are printing out twice. Once for his entry for his 1st wife and then again for the entry with his 2nd wife (her sister). I have other relatives who have been married twice and this does seem to happen with them. Have I pushed some magic button and made it appear twice by mistake. I do hope someone can help with this as I have checked my settings and cannot find an answer. In the options for the report under include I have ticked Events for husband and wife Events for marriage Notes all of these options are ticked I have tried unchecking events for husband and wife and events for marriage alternatively and this does not fix the problem Thanks for any kind help with this. Ta Gwen Land of the long white cloud - New Zealand _ Windows Live Messenger: Celebrate 10 amazing years with free winks and emoticons. http://clk.atdmt.com/UKM/go/157562755/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Descendants narrative report query
Thankyou to Valerie I unchecked 'Don't repeat duplicate lines' but it still is printing out wrong. Do I need to close the program down to make it work? Ta very much Gwen Land of the long white cloud - New Zealand On 27/08/2009, at 6:12 PM, Valerie Laskowski wrote: Select "Report Options" -->"Don't Repeat duplicate lines" (on the topmost left of the window). Valerie From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of Noddie Sent: Thursday, August 27, 2009 12:06 AM To: Legacy user group Subject: [LegacyUG] Descendants narrative report query Hi I have created a descendants narrative report for my relative. I checked the detail and find on the following pages I have duplicated information which I believe is not correct. I have a chap who married two sisters, the 2nd after the first sister died. I have events entered for this chap, but am finding on my report and it is only with him, that the events for :Noted events in his life: are printing out twice. Once for his entry for his 1st wife and then again for the entry with his 2nd wife (her sister). I have other relatives who have been married twice and this does seem to happen with them. Have I pushed some magic button and made it appear twice by mistake. I do hope someone can help with this as I have checked my settings and cannot find an answer. In the options for the report under include I have ticked Events for husband and wife Events for marriage Notes all of these options are ticked I have tried unchecking events for husband and wife and events for marriage alternatively and this does not fix the problem Thanks for any kind help with this. Ta Gwen Land of the long white cloud - New Zealand Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Descendants narrative report query
Hi I have created a descendants narrative report for my relative. I checked the detail and find on the following pages I have duplicated information which I believe is not correct. I have a chap who married two sisters, the 2nd after the first sister died. I have events entered for this chap, but am finding on my report and it is only with him, that the events for :Noted events in his life: are printing out twice. Once for his entry for his 1st wife and then again for the entry with his 2nd wife (her sister). I have other relatives who have been married twice and this does seem to happen with them. Have I pushed some magic button and made it appear twice by mistake. I do hope someone can help with this as I have checked my settings and cannot find an answer. In the options for the report under include I have ticked Events for husband and wife Events for marriage Notes all of these options are ticked I have tried unchecking events for husband and wife and events for marriage alternatively and this does not fix the problem Thanks for any kind help with this. Ta Gwen Land of the long white cloud - New Zealand
Re: [LegacyUG] Source text colour
Thankyou all so much for that. I got it finally. A little slow. Gwen Land of the long white cloud - New Zealand On 9/08/2009, at 11:34 AM, Jenny M Benson wrote: Noddie wrote There is nothing that suggests or represents red text when I click on Data Text colour (think this is the right button to go to) only blue, which I have for the above labels. I believe if I update it to something else I shall still have the red text added after I apply a source. As Ron said, the button you want is Contents. -- Jenny M Benson Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source text colour
I have not figured out how to do this and thanks you once again for your help with this. A novice at the newer version of Legacy and appreciate your time. Now all I need to do is find out how to correct all my other sources to the new format. :) Gwen Land of the long white cloud - New Zealand On 8/08/2009, at 8:09 PM, ronald ferguson wrote: Gwen, I'm not entirely certain as to whether I have got the correct screen, but if so, try Options>Customise>Colours, click the bar and then "Contents" (I assume you have the latest update - if not ignore the bit about clicking the bar) and select the colour. I also strongly suggest that you save your colour scheme using the save button as it is not uncommon for the scheme to be lost when problems are hit, and a new install becomes necessary. Ron Ferguson _ Tutorials: Programme of adding videos commenced http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ To: LegacyUserGroup@legacyfamilytree.com From: 7thw...@ihug.co.nz Subject: [LegacyUG] Source text colour Date: Sat, 8 Aug 2009 19:54:58 +1200 Hi I have not used source writer much and wondered about the red highlighted text that now appears when you add a source to the family page ie Born Chr Bur etc. The text quite bright and I wondered if it is possible to change this to something more unobstrusive. I realise the red stand out and this could be the reason behind the colour. Hope this is clear and would love any comments on this please. Kind regards Gwen Land of the long white cloud - New Zealand _ Windows Live Messenger: Thanks for 10 great years—enjoy free winks and emoticons. http://clk.atdmt.com/UKM/go/157562755/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source text colour
Hi again I have gone into the screen suggested and still cannot seem to get the right one for the 'red text' which my blue text for the Data text is updated to when you add a source to either Birth, Chr, Died, or Buried. There is nothing that suggests or represents red text when I click on Data Text colour (think this is the right button to go to) only blue, which I have for the above labels. I believe if I update it to something else I shall still have the red text added after I apply a source. I cannot seem to find anywhere that is apparent to make ammends for the red text. My colours are quite muted grey and blue which I like but the red is like an eyesore applied after I have added a source to any of the fields mentioned above. Any other clues what I am doing wrong. Thanks heaps Gwen Land of the long white cloud - New Zealand On 8/08/2009, at 8:09 PM, ronald ferguson wrote: Gwen, I'm not entirely certain as to whether I have got the correct screen, but if so, try Options>Customise>Colours, click the bar and then "Contents" (I assume you have the latest update - if not ignore the bit about clicking the bar) and select the colour. I also strongly suggest that you save your colour scheme using the save button as it is not uncommon for the scheme to be lost when problems are hit, and a new install becomes necessary. Ron Ferguson _ Tutorials: Programme of adding videos commenced http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ To: LegacyUserGroup@legacyfamilytree.com From: 7thw...@ihug.co.nz Subject: [LegacyUG] Source text colour Date: Sat, 8 Aug 2009 19:54:58 +1200 Hi I have not used source writer much and wondered about the red highlighted text that now appears when you add a source to the family page ie Born Chr Bur etc. The text quite bright and I wondered if it is possible to change this to something more unobstrusive. I realise the red stand out and this could be the reason behind the colour. Hope this is clear and would love any comments on this please. Kind regards Gwen Land of the long white cloud - New Zealand _ Windows Live Messenger: Thanks for 10 great years—enjoy free winks and emoticons. http://clk.atdmt.com/UKM/go/157562755/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source text colour
Thankyou for that I shall give it a whirl and try to achieve another colour than red. Much appreciated Gwen Land of the long white cloud - New Zealand On 8/08/2009, at 8:09 PM, ronald ferguson wrote: Gwen, I'm not entirely certain as to whether I have got the correct screen, but if so, try Options>Customise>Colours, click the bar and then "Contents" (I assume you have the latest update - if not ignore the bit about clicking the bar) and select the colour. I also strongly suggest that you save your colour scheme using the save button as it is not uncommon for the scheme to be lost when problems are hit, and a new install becomes necessary. Ron Ferguson _ Tutorials: Programme of adding videos commenced http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ To: LegacyUserGroup@legacyfamilytree.com From: 7thw...@ihug.co.nz Subject: [LegacyUG] Source text colour Date: Sat, 8 Aug 2009 19:54:58 +1200 Hi I have not used source writer much and wondered about the red highlighted text that now appears when you add a source to the family page ie Born Chr Bur etc. The text quite bright and I wondered if it is possible to change this to something more unobstrusive. I realise the red stand out and this could be the reason behind the colour. Hope this is clear and would love any comments on this please. Kind regards Gwen Land of the long white cloud - New Zealand _ Windows Live Messenger: Thanks for 10 great years—enjoy free winks and emoticons. http://clk.atdmt.com/UKM/go/157562755/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Source text colour
Hi I have not used source writer much and wondered about the red highlighted text that now appears when you add a source to the family page ie Born Chr Buretc. The text quite bright and I wondered if it is possible to change this to something more unobstrusive. I realise the red stand out and this could be the reason behind the colour. Hope this is clear and would love any comments on this please. Kind regards Gwen Land of the long white cloud - New Zealand
Re: [LegacyUG] Re: picture report
Ta for that I understand what you say now about cut and paste and it is fine. I only have a few photos out of sinc so not too much of a biggie now. Appreciate your comments. Regards Gwen Land of the long white cloud - New Zealand On 1/08/2008, at 4:58 PM, JLB wrote: I gave you the Moon and now you want the Sun. Cut and paste - drag and drop. ??? Is there a really big difference here? To drag and drop you'd have to be able to have the Individual gallery window and then each Event gallery window open at the same time. First of all, Legacy won't let you do it. (I'm pretty sure.) and second it would take so darn long just setting up your windows, one after another to do what you're asking. JL JLiki - creating your own genealogy wiki http://www3.telus.net/Jgen/jliki.html Noddie wrote: Thankyou heaps Jl for that I shall give it a go. I am in abit of a mess and wondered if there was any way you can drag and drop photos for this type of thing? Regards Gwen Land of the long white cloud - New Zealand On 1/08/2008, at 3:48 PM, JLB wrote: If you go to an Individual's photo gallery, you'll see on the right there's a little box that says Individual. If you scroll down that list it gives other events where pictures area also attached. If you right-click on a picture in one gallery and click Copy or Cut, you can then switch to another gallery and click Paste. This will only work for the vital events or after you have other types of events entered. JL JLiki - creating your own genealogy wiki http://www3.telus.net/Jgen/jliki.html Noddie wrote: Hi again I think I found my answer in the archived messages. I would love to know know, if there is any easy way to rearrange some of the photos and detach and re-attach them to different events. I need to do some housekeeping. I did not realise that the individual picture window for attachments did not print out on reports only the first picture will in the list. Kind regards /Gwen / /Land of the long white cloud - New Zealand/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Re: picture report
Thankyou heaps Jl for that I shall give it a go. I am in abit of a mess and wondered if there was any way you can drag and drop photos for this type of thing? Regards Gwen Land of the long white cloud - New Zealand On 1/08/2008, at 3:48 PM, JLB wrote: If you go to an Individual's photo gallery, you'll see on the right there's a little box that says Individual. If you scroll down that list it gives other events where pictures area also attached. If you right-click on a picture in one gallery and click Copy or Cut, you can then switch to another gallery and click Paste. This will only work for the vital events or after you have other types of events entered. JL JLiki - creating your own genealogy wiki http://www3.telus.net/Jgen/jliki.html Noddie wrote: Hi again I think I found my answer in the archived messages. I would love to know know, if there is any easy way to rearrange some of the photos and detach and re-attach them to different events. I need to do some housekeeping. I did not realise that the individual picture window for attachments did not print out on reports only the first picture will in the list. Kind regards /Gwen / /Land of the long white cloud - New Zealand/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Re: picture report
Hi again I think I found my answer in the archived messages. I would love to know know, if there is any easy way to rearrange some of the photos and detach and re-attach them to different events. I need to do some housekeeping. I did not realise that the individual picture window for attachments did not print out on reports only the first picture will in the list. Kind regards Gwen Land of the long white cloud - New Zealand
[LegacyUG] Re; Legacy Picture report
I have been reading an email from 'Steve' regarding being able to print out as report on this from the Scrapbook page. I was wondering if some kind person could outline exactly how to do this. I would also like to see what I have attached to what as I need to go through now and change the individual pictures and add them to events instead so they printout in reports. Thanks heaps Ver 6 deluxe Gwen Land of the long white cloud - New Zealand
Re: [LegacyUG] Pictures in reports
Hi me again I have tried it once again and this time it has printed out. I think I needed to start the program again after I had changed the icons which I ticked. Thanks once again and sorry to be a nuisance. Gwen Land of the long white cloud - New Zealand On 30/07/2008, at 8:52 PM, Jenny M Benson wrote: Noddie wrote I have changed the individual photo for my chap and put the one that would not print into the Death event. I went to Publishing centre and tried to print out both photos I have for this chap. One is individual and the other attached to Event, death. I can only get the Individual one to print out Can you clarify whether you are attaching this picture to the Death as a "Death Picture" accessed from the + icon next to Death on the Individual's Information screen or whether you are creating an Event named Death and adding the picture there? If the former, no I don't think the picture will print. If the latter, be sure you have ticked the relevant boxes in Report Options. and it is not very big on the page. I have tried changing the size to 800 pixels as there is no other option there. *Where* is there no other option? On the Report Options>Pictures tab, under Picture Options you can choose from Small, Medium, Large or Custom. In my Legacy, I enter the Custom size in inches but I'm not sure if that is a Legacy Default or an option I have chosen for the units to use. -- Jenny M Benson Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Pictures in reports
Thankyou very mauch for your reply to my query. I have created an event for Death Certificate which I would like to print out on my book report. Picture scrapbook I find there is only opetions for: Individuals and Marriages for photos to be printed? I have ticked the following as I would like to have the event pictures print out Pictures menu in scrapbook Individual pictures Individual event pictures - My death certificate event is not printing Marriage pictures - even though this chap never married I am at a loss and i think the program Ver 6 Deluxe is still limited in this area. Is it any better in Ver 7? Thanks again Gwen Land of the long white cloud - New Zealand On 30/07/2008, at 8:52 PM, Jenny M Benson wrote: Noddie wrote I have changed the individual photo for my chap and put the one that would not print into the Death event. I went to Publishing centre and tried to print out both photos I have for this chap. One is individual and the other attached to Event, death. I can only get the Individual one to print out Can you clarify whether you are attaching this picture to the Death as a "Death Picture" accessed from the + icon next to Death on the Individual's Information screen or whether you are creating an Event named Death and adding the picture there? If the former, no I don't think the picture will print. If the latter, be sure you have ticked the relevant boxes in Report Options. and it is not very big on the page. I have tried changing the size to 800 pixels as there is no other option there. *Where* is there no other option? On the Report Options>Pictures tab, under Picture Options you can choose from Small, Medium, Large or Custom. In my Legacy, I enter the Custom size in inches but I'm not sure if that is a Legacy Default or an option I have chosen for the units to use. -- Jenny M Benson Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Pictures in reports
Thank you all heaps for that. I was hoping upon hope that they had resolved this issue with Legacy. It appears they have not. Regards Gwen Land of the long white cloud - New Zealand On 30/07/2008, at 4:16 PM, Leon Chapman wrote: It is definitely a limitation to the program. We would like to be able to print multiple pictures for an individual within a report. Maybe they will implement it one of these days. Chap On Tue, Jul 29, 2008 at 9:53 PM, Noddie <[EMAIL PROTECTED]> wrote: i Chap Thanks heaps for that. It does seem a long winded way but I guess it is the most logical. I have not done that before Just thrown them all into the picture icon window and added them there., Individual, Birth etc. I feel I have a lot of sorting out to do. How time consuming wish I had known that in the early stages of using the program. Ta for Gwen Land of the long white cloud - New Zealand On 30/07/2008, at 3:39 PM, Leon Chapman wrote: Gwen: Only one picture (the default individual picture) gets printed in reports. If you want multiple pictures you have to attach the other pictures to Events for the individual or marriage (for a family picture) and then select to print out event pictures. Another way is to use the Publishing Center under Reports and then choose to have a Picture Scrapbook printed after or between reports. Chap On Tue, Jul 29, 2008 at 9:29 PM, Noddie <[EMAIL PROTECTED]> wrote: Hi I am once again wondering how to get the 'Pictures' to print out in my reports mainly the Descendant (narrative) which is the only one apart from the individual report I have tried. I can only get the first photo * to show up., event thought I may have 3-4. The others listed do not print out at all. Any help would be greatly appreciated. Is this still an issue or has it been resolved? Thanks heaps Gwen Land of the long white cloud - New Zealand -- ___ Leon Chapman [EMAIL PROTECTED] - Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp -- ___ Leon Chapman [EMAIL PROTECTED] - Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Pictures in reports
Hi again I have changed the individual photo for my chap and put the one that would not print into the Death event. I went to Publishing centre and tried to print out both photos I have for this chap. One is individual and the other attached to Event, death. I can only get the Individual one to print out and it is not very big on the page. I have tried changing the size to 800 pixels as there is no other option there. No go I'm afraid. Lost with this one. Regards Gwen Land of the long white cloud - New Zealand On 30/07/2008, at 3:39 PM, Leon Chapman wrote: Gwen: Only one picture (the default individual picture) gets printed in reports. If you want multiple pictures you have to attach the other pictures to Events for the individual or marriage (for a family picture) and then select to print out event pictures. Another way is to use the Publishing Center under Reports and then choose to have a Picture Scrapbook printed after or between reports. Chap On Tue, Jul 29, 2008 at 9:29 PM, Noddie <[EMAIL PROTECTED]> wrote: Hi I am once again wondering how to get the 'Pictures' to print out in my reports mainly the Descendant (narrative) which is the only one apart from the individual report I have tried. I can only get the first photo * to show up., event thought I may have 3-4. The others listed do not print out at all. Any help would be greatly appreciated. Is this still an issue or has it been resolved? Thanks heaps Gwen Land of the long white cloud - New Zealand -- ___ Leon Chapman [EMAIL PROTECTED] - Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Pictures in reports
i Chap Thanks heaps for that. It does seem a long winded way but I guess it is the most logical. I have not done that before Just thrown them all into the picture icon window and added them there., Individual, Birth etc. I feel I have a lot of sorting out to do. How time consuming wish I had known that in the early stages of using the program. Ta for Gwen Land of the long white cloud - New Zealand On 30/07/2008, at 3:39 PM, Leon Chapman wrote: Gwen: Only one picture (the default individual picture) gets printed in reports. If you want multiple pictures you have to attach the other pictures to Events for the individual or marriage (for a family picture) and then select to print out event pictures. Another way is to use the Publishing Center under Reports and then choose to have a Picture Scrapbook printed after or between reports. Chap On Tue, Jul 29, 2008 at 9:29 PM, Noddie <[EMAIL PROTECTED]> wrote: Hi I am once again wondering how to get the 'Pictures' to print out in my reports mainly the Descendant (narrative) which is the only one apart from the individual report I have tried. I can only get the first photo * to show up., event thought I may have 3-4. The others listed do not print out at all. Any help would be greatly appreciated. Is this still an issue or has it been resolved? Thanks heaps Gwen Land of the long white cloud - New Zealand -- ___ Leon Chapman [EMAIL PROTECTED] - Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Pictures in reports
Hi I am once again wondering how to get the 'Pictures' to print out in my reports mainly the Descendant (narrative) which is the only one apart from the individual report I have tried. I can only get the first photo * to show up., event thought I may have 3-4. The others listed do not print out at all. Any help would be greatly appreciated. Is this still an issue or has it been resolved? Thanks heaps Gwen Land of the long white cloud - New Zealand
Re: [LegacyUG] V7 Install
Hi I was wondering about Legacy 7. I was lead to believe this version was not available yet? Kind regards Gwen Land of the long white cloud - New Zealand On 2/06/2008, at 5:41 PM, Robert57P via Gmail wrote: Different versions of Legacy seem to "play nice" with each other. I've got Legacy 5, Legacy 6, and Legacy 7 all installed on the same PC. Of course, be SURE you specify a DIFFERENT INSTALL directory! I like having both old and new version installed - it allows me to keep "working" with the older version while I "play" with the new version to get used to it and make sure I don't hit any hiccups. It also allows me to compare screens and option settings and report settings between the two versions. One "problem" - version 7's database is a different format. Once you've converted your database, version 6 won't be able to read it. In the past they've offered an "after the fact" patch for the old version so it can read the new version (but of course doesn't offer the extra features). But its too early to know if they will do this for version 6/7 yet (I'm guessing they will). Best bet - make a COPY of your database and use one copy for version 6 and a different database copy for version 7 while you are "playing"/ experimenting with it. NOTE - I have not tried de-installing an older version after a new one is installed. I would think it would work fine (assuming, again, that it is installed into a different directory), but I haven't tested it. Bob - Original Message - From: "William Robinette" <[EMAIL PROTECTED]> To: Sent: Sunday, June 01, 2008 9:28 PM Subject: [LegacyUG] V7 Install Can V6 and V7 be installed on the same computer at the same time or is it necessary to uninstall V6 before installing V7. Thanks, Bill Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Unable to open Legacy
Thankyou heaps for all your replies I have uninstalled and reinstalled the program and so far it is working. I shall keep my fingers crossed for now. Regards Gwen Land of the long white cloud - New Zealand On 19/02/2008, at 2:47 AM, Sherry/Support wrote: Gwen, Try uninstalling and reinstalling Legacy. **Make sure you have all other program shut down and your anti-virus and spyware scanning software disabled when you install Legacy** Your family file will be protected when you uninstall and reinstall. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noddie Sent: Sunday, February 17, 2008 8:48 PM To: Legacy user group Subject: [LegacyUG] Unable to open Legacy Hi I am having trouble with my Legacy file and cannot open it at all. I am getting an error message similar to WERa921.dir000\Legacy.exe.mdmp error. Has any else had this problem. I am currently using SP2 XP pro and Legacy 6 deluxe. Thanks for any help with this. Regards Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Unable to open Legacy
Hi I am having trouble with my Legacy file and cannot open it at all. I am getting an error message similar to WERa921.dir000\Legacy.exe.mdmp error. Has any else had this problem. I am currently using SP2 XP pro and Legacy 6 deluxe. Thanks for any help with this. Regards Gwen
Re: [LegacyUG] Error 3343 and then Runtime Error 5
Hi Ronald Thanks for your email. I have done what you said and to be honest it makes no sense to me. I cannot find out if I have Visual Studio installed or not. Do you know how to check, in easy layman terms. I hae also read about deleting the .usr and .dbm files. I have the latest build, Win xpro etc. I am wondering if this problem arose when I exported my info from my old computer, as I shifted the photos around to better suit my new computer? Any help would be wonderful. I had one reply from Millennia but none since I wrote again. Ta Gwen Land of the long white cloud - New Zealand On 24/10/2007, at 9:45 PM, ronald ferguson wrote: Gwen, It may not answer your problem but have you looked at: http:// support.microsoft.com/kb/238401 ? Googling "error 3343" (no quotes) also gives other information relating to this error. Ron Ferguson _ For Genealogy, Software and Social visit: http://www.fergys.co.uk *Over 650 Surnames from 11 Countries* View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: [EMAIL PROTECTED] Subject: [LegacyUG] Error 3343 and then Runtime Error 5 Date: Wed, 24 Oct 2007 14:39:12 +1300 To: LegacyUserGroup@legacyfamilytree.com Hello'I am still getting these error and am at a loss as what to do to fix it. Any suggestions. Ta Please see notes below for configuration details Gwen Land of the long white cloud - New Zealand On 22/10/2007, at 12:34 PM, Noddie wrote: Hi again Sherry' I was wondering if you are able to guide regarding this error below. I believe I amtheadministrator for WinXp and as it is listed there when I go to Start etc. This error is not covered on the website for archives or FAQ's. Thanks heaps Gwen Gwen Land of the long white cloud - New Zealand On 18/10/2007, at 2:58 PM, Sherry/Support wrote: Gwen, The Legacy3.dbm file is a temporary work file. Do you have full administrative access in Windows XP or are you using a limited user account? When you're on a Windows computer, that file is written to the c:\Windows\Temp folder. Which build of Legacy are you using (go to Help> General Information or, in Legacy v6 the Legacy Home tab)? Please give me the full version number and date. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noddie Sent: Wednesday, October 17, 2007 6:17 PM To: Legacy user group Subject: [LegacyUG] Error 3343 and then Error 5 Hi I have recently ugraded to WinXp pro (imac machine) and have migrated my data over to this computer from Win98. The error I have been getting is when I go to the 'pic centre'. I never used this in win98 as I had trouble then too. I was advised this would be resolved when I upgraded to WinXp.I zipped my data and media files (winzip) and unzipped these and placed them into the Legacy/Picture part of Legacy 6 (deluxe version). The error is : Error 3343: Legacy3.dbm 'unrecoginzable data format' not sure why is is saying Legacy3... When I try to exit out the program hangs I then get a Error 5 and have to close down the program. I have done a maintenance check and this has not corrected the problem. I cannot decide from the troubleshooting site what I should do. Does any kind person have any clues. I dearly would like to use this part of the program at last. Thanks for any help Regards Gwen _ Feel like a local wherever you go. http://www.backofmyhand.com Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Reports have blank pages
Hi again Thankyou to all for replying to my email. I have checked what you said Cathy and it was only the first two pages of four that did not print. Sorry to be such a cluts. It seems okay now. Regards Gwen Land of the long white cloud - New Zealand On 23/10/2007, at 1:25 PM, Cathy wrote: Hi Gwen, Can you clarify? The reports have blank pages deliberately at the beginning after the title and content pages - like a book. You don't mean those blank pages do you? Some sections can also be set to start on a new or odd numbered page. See the tick box in the Index section See tick box on Page Layout tab - Start each generation on a new page. If you don't have many notes or events, I suspect that could possibly sometimes cause a blank page. You say "that is fine". Do you mean that the preview is fine and doesn't have blank pages? What happens if you save to PDF? Does that have the blank pages? Are you sure you are not just printing odd or even pages when you come to print. Are you including pictures at "original size"? That can mess up the page breaks. Sorry I can't think of anything else. If it's the preview with the unusual blanks, it could be a memory problem with your computer. I'm assuming you have a new computer and haven't put XP on your old 98 computer. Many computers running Win98 didn't have enough RAM to handle XP. Same with the switch to Vista from XP. Each operating system wants more and more RAM - and you usually need at least twice the minimum recommended by Microsoft. Cheers, Cathy At 07:36 AM 23/10/2007, you wrote: Hi I am having trouble in Deluxe6 version using Winxp pro in reports. I also had this propblem when I was using win98. I create an Ancestors narrative report and that is fine, but when I go to print it I have every secnd page as a blank. I have checked the page length in both printer and on Legacy settings. Any idea how to get rid of these? Ta Gwen Land of the long white cloud - New Zealand Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Error 3343 and then Runtime Error 5
Hello'I am still getting these error and am at a loss as what to do to fix it. Any suggestions. Ta Please see notes below for configuration details Gwen Land of the long white cloud - New Zealand On 22/10/2007, at 12:34 PM, Noddie wrote: Hi again Sherry' I was wondering if you are able to guide regarding this error below. I believe I amtheadministrator for WinXp and as it is listed there when I go to Start etc. This error is not covered on the website for archives or FAQ's. Thanks heaps Gwen Gwen Land of the long white cloud - New Zealand On 18/10/2007, at 2:58 PM, Sherry/Support wrote: Gwen, The Legacy3.dbm file is a temporary work file. Do you have full administrative access in Windows XP or are you using a limited user account? When you're on a Windows computer, that file is written to the c:\Windows\Temp folder. Which build of Legacy are you using (go to Help > General Information or, in Legacy v6 the Legacy Home tab)? Please give me the full version number and date. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noddie Sent: Wednesday, October 17, 2007 6:17 PM To: Legacy user group Subject: [LegacyUG] Error 3343 and then Error 5 Hi I have recently ugraded to WinXp pro (imac machine) and have migrated my data over to this computer from Win98. The error I have been getting is when I go to the 'pic centre'. I never used this in win98 as I had trouble then too. I was advised this would be resolved when I upgraded to WinXp.I zipped my data and media files (winzip) and unzipped these and placed them into the Legacy/Picture part of Legacy 6 (deluxe version). The error is : Error 3343: Legacy3.dbm 'unrecoginzable data format' not sure why is is saying Legacy3... When I try to exit out the program hangs I then get a Error 5 and have to close down the program. I have done a maintenance check and this has not corrected the problem. I cannot decide from the troubleshooting site what I should do. Does any kind person have any clues. I dearly would like to use this part of the program at last. Thanks for any help Regards Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/ Etiquette.asp Archived messages: http://www.mail-archive.com/ legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Reports have blank pages
Hi I am having trouble in Deluxe6 version using Winxp pro in reports. I also had this propblem when I was using win98. I create an Ancestors narrative report and that is fine, but when I go to print it I have every secnd page as a blank. I have checked the page length in both printer and on Legacy settings. Any idea how to get rid of these? Ta Gwen Land of the long white cloud - New Zealand
Re: [LegacyUG] Error 3343 and then Error 5
Hi again Sherry' I was wondering if you are able to guide regarding this error below. I believe I amtheadministrator for WinXp and as it is listed there when I go to Start etc. This error is not covered on the website for archives or FAQ's. Thanks heaps Gwen Gwen Land of the long white cloud - New Zealand On 18/10/2007, at 2:58 PM, Sherry/Support wrote: Gwen, The Legacy3.dbm file is a temporary work file. Do you have full administrative access in Windows XP or are you using a limited user account? When you're on a Windows computer, that file is written to the c:\Windows\Temp folder. Which build of Legacy are you using (go to Help > General Information or, in Legacy v6 the Legacy Home tab)? Please give me the full version number and date. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noddie Sent: Wednesday, October 17, 2007 6:17 PM To: Legacy user group Subject: [LegacyUG] Error 3343 and then Error 5 Hi I have recently ugraded to WinXp pro (imac machine) and have migrated my data over to this computer from Win98. The error I have been getting is when I go to the 'pic centre'. I never used this in win98 as I had trouble then too. I was advised this would be resolved when I upgraded to WinXp.I zipped my data and media files (winzip) and unzipped these and placed them into the Legacy/Picture part of Legacy 6 (deluxe version). The error is : Error 3343: Legacy3.dbm 'unrecoginzable data format' not sure why is is saying Legacy3... When I try to exit out the program hangs I then get a Error 5 and have to close down the program. I have done a maintenance check and this has not corrected the problem. I cannot decide from the troubleshooting site what I should do. Does any kind person have any clues. I dearly would like to use this part of the program at last. Thanks for any help Regards Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Error 3343 and then Error 5
Hi Sherry Thankyou for your email and the prompt reply. I am using Legacy deluxe 6 latest update, file maintenance done and no problems. Verson 6.0.0.155 dated 28 Jul 2007 I think I am the only Administrator for my computer as I am the only one who uses it. How would I check this for full administrative access? Does this help you Regards Gwen On 18/10/2007, at 2:58 PM, Sherry/Support wrote: Gwen, The Legacy3.dbm file is a temporary work file. Do you have full administrative access in Windows XP or are you using a limited user account? When you're on a Windows computer, that file is written to the c:\Windows\Temp folder. Which build of Legacy are you using (go to Help > General Information or, in Legacy v6 the Legacy Home tab)? Please give me the full version number and date. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noddie Sent: Wednesday, October 17, 2007 6:17 PM To: Legacy user group Subject: [LegacyUG] Error 3343 and then Error 5 Hi I have recently ugraded to WinXp pro (imac machine) and have migrated my data over to this computer from Win98. The error I have been getting is when I go to the 'pic centre'. I never used this in win98 as I had trouble then too. I was advised this would be resolved when I upgraded to WinXp.I zipped my data and media files (winzip) and unzipped these and placed them into the Legacy/Picture part of Legacy 6 (deluxe version). The error is : Error 3343: Legacy3.dbm 'unrecoginzable data format' not sure why is is saying Legacy3... When I try to exit out the program hangs I then get a Error 5 and have to close down the program. I have done a maintenance check and this has not corrected the problem. I cannot decide from the troubleshooting site what I should do. Does any kind person have any clues. I dearly would like to use this part of the program at last. Thanks for any help Regards Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Error 3343 and then Error 5
Hi I have recently ugraded to WinXp pro (imac machine) and have migrated my data over to this computer from Win98. The error I have been getting is when I go to the 'pic centre'. I never used this in win98 as I had trouble then too. I was advised this would be resolved when I upgraded to WinXp.I zipped my data and media files (winzip) and unzipped these and placed them into the Legacy/Picture part of Legacy 6 (deluxe version). The error is : Error 3343: Legacy3.dbm 'unrecoginzable data format' not sure why is is saying Legacy3... When I try to exit out the program hangs I then get a Error 5 and have to close down the program. I have done a maintenance check and this has not corrected the problem. I cannot decide from the troubleshooting site what I should do. Does any kind person have any clues. I dearly would like to use this part of the program at last. Thanks for any help Regards Gwen
[LegacyUG] Report printing
Hi I have just recently progress to win xp pro from win98 being told that most of my problems in Legacy were due to win98. I still however find that when I print out a desc narrative report I get a blank page every other when I go to print. Could you please let me know if this has been corrected and if so how should I fix it with my legacy 6 latest version. Thanks for your time Regards Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy on Mac
Thankyou heaps to everyone for the wonderful help with migrating to a mac/pc Truly appreciated. Gwen - Original Message - From: "Robert Carneal USA" <[EMAIL PROTECTED]> To: Sent: Saturday, September 01, 2007 2:46 AM Subject: Re: [LegacyUG] Legacy on Mac Well, some of us have tried. I have not. They reported various degrees of success, but the common denominator seemed to be it runs slower on Mac than Windows. For some, that is acceptable. For people like me, that is bone breaking frustrating unacceptable. Ask yourself this: As Legacy grows, it will use more Windows commands and drivers. I tell people the reason I won't try it is because Legacy compatible programs such as Passage Express, GenViewer, GenMatcher, AniMap, probably will not be optimized for for both operating systems. Thus, if I had a Mac, I -probably- could run Legacy, but what about all of the other programs Legacy works so well with? I am not sure. Robert Denise Levenick wrote: Has anyone used Legacy on a Mac using the Windows OS? I know that the newer Macs will run both Mac and Windows systems but wonder if there are any glitches. Denise Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Moving Legacy to another computer
Hi I have recently bought a new computer. I shall be running Xp pro on it, migrating from Win98. Do I need to re-install the program, then put the files in the same folder as they were on in my older computer., so that the update knows where the files are. If this is incorrect could some kind person guide me in how to do this. Thanks heaps Gwen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Correctly entering adopted children
Hi Cathy Thanks heaps for that. I wanted to get it right. Cheers Gwen - Original Message - From: "Cathy" <[EMAIL PROTECTED]> To: Sent: Thursday, July 26, 2007 4:10 PM Subject: Re: [LegacyUG] Correctly entering adopted children Hi Gwen, No it's not possible to have two different main names for the one person. You have to choose whether to use the birth name as the main name and the adopted name as an AKA or the other way around. If the person was adopted as a babe, I'd use the adopted name as the main name as this is the name that most records will be in - however I think the rules would say to use the birth name as the main name. Cathy At 10:33 AM 26/07/2007, you wrote: >Hi >I am at a loss, how to correctly enter adopted children so that the >childs birth name >appears with the birth mother (unmarried), and then the childs >adopted name appears with the >adoptive parents. >I note on the help file it explains how to enter multiple parents, >but does explain how >to do the latter. I know this is possible. >Hope I have made this clear as an explanation. > >Kind regards >Gwen Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Correctly entering adopted children
Hi I am at a loss, how to correctly enter adopted children so that the childs birth name appears with the birth mother (unmarried), and then the childs adopted name appears with the adoptive parents. I note on the help file it explains how to enter multiple parents, but does explain how to do the latter. I know this is possible. Hope I have made this clear as an explanation. Kind regards Gwen Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Printing our a report
Hi Cathy and Mark I would like to thank you both heaps for the wonderful input for my query. I did what you said Mark and this worked fine. I was rapt about that. Truly appreciate your time on this one. Regards Gwen - Original Message - From: Mark Lang To: LegacyUserGroup@legacyfamilytree.com Sent: Wednesday, May 16, 2007 6:39 PM Subject: RE: [LegacyUG] Printing our a report I tend to get into trouble when I answer this list as not all the information is in the request as is this one. I interpret this as a report from a particular generation through to the last person which may be yourself. In this case I think there is. Open the Relationship Calculator (Tools > Relationship Calculator), use the left side as yourself, and the right side as your ancestor say first generation. Click Print then Preview and there is a chart from the first generation through to yourself showing direct line ancestors between. If this is not what you want, I apologise in advance Mark From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noddie Sent: Wednesday, 16 May 2007 2:21 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Printing our a report Hi I was wondering if there is any way to printout a report for - Direct Line - descendants of a line. I am using Deluxe 6 version. Thanks heaps for any help Gwen Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Printing our a report
Hi I was wondering if there is any way to printout a report for - Direct Line - descendants of a line. I am using Deluxe 6 version. Thanks heaps for any help Gwen Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Half source query
Thanks heaps for that, I shall download the latest update. Regards Gwen - Original Message - From: "Dermot McGlone" <[EMAIL PROTECTED]> To: Sent: Wednesday, February 28, 2007 11:06 PM Subject: Re: [LegacyUG] Half source query Gwen, This was a known bug in vers 6.0.0.110 which showed some errors with respect to relationships of half relatives. This was fixed in the latest version, 6.0.0.118, which can be downloaded from the "Legacy Home" tab or from http://www.legacyfamilytree.com/DownloadUpdate.asp. Regards, Dermot. On 28/02/07, Noddie <[EMAIL PROTECTED]> wrote: > > Hi everyone > I was wondering with my version 6.0.0.110 using win 98 what 'Half Source' > means It is a half brother to my grandmother but > on the earlier version 5 it did not say Half source. > Any help greatly appreciated. > Regards > Gwen Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Half source query
Hi everyone I was wondering with my version 6.0.0.110 using win 98 what 'Half Source' means It is a half brother to my grandmother but on the earlier version 5 it did not say Half source. Any help greatly appreciated. Regards Gwen Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Error 2147024882
Hi again Les I managed to get the Resource Meter going. Not sure why it did not do it before. I did find on the net the cab it was in, so it made it easer I think. I see what you mean, I can now tell when I am getting dangerously low. Thanks heaps again, and I shall have another go with Gene to see what is happening in FamilyTree today. Regards Gwen - Original Message - From: "Leslie E. Buege" <[EMAIL PROTECTED]> To: Sent: Tuesday, October 03, 2006 5:44 AM Subject: Re: [LegacyUG] Error 2147024882 Gwen, The problem with W98 is the memory that is used to keep track of running applications like Legacy Family Tree. This is a fixed amount of memory that is not affected my the amount of RAM your computer has. It can not be changed. The information stored there is dynamic in nature so when an application (or part of an application) closes down, memory used by that application should be released. If it isn't, eventually you run out of "system resources". My experience has been that version 6 apparently has problems with releasing used resources when moving from one part of the application to another. This even happens when using the same features I used in version 5. So it doesn't seem to be associated with the new features of version 6. Since I run a dual boot system (meaning I also have XP on the same computer) if I need to, I just reboot into XP to finish my task at hand. (For those of you who are interested, I access the same data file from W98 and XP). Gwen, what I suggest is that you do is what I have done. Microsoft has provided a handy resource monitoring application called the "Resource Meter". When running, it resides in the system tray down by the clock. You should be able to find "Resource Meter" by going to Start - Programs - Accessories - System Tools. If it isn't there, you can create a shortcut on your desktop by right clicking on the file name and selecting "send to" and then "desktop (short cut)". The file name is RSRCMTR.EXE and is located in the C:\Windows folder. I have the application start up when booting my computer because I put the shortcut in the "Startup" folder. When "Resource Meter" is running, you will get a warning message when the resources get low. You might be able shut down other applications that are running at the time to free up resource memory that Legacy Family Tree needs. Or, exit Family Tree and reboot your computer to create the most free resource memory. For further reading, see: http://www.informationweek.com/story/showArticle.jhtml?articleID=17200581 I believe there must me a memory leak that needs to be fixed by the programmers. Using the same features in version 6 that were used in version 5 and running into memory resource problems would seem to indicate that something changed with how memory resources are now being used in version 6. I don't believe you should have to upgrade to XP to solve this problem. I also believe that there are a lot of Legacy uses that wouldn't have a clue as to how to upgrade to XP especially if they are senior citizens like me. I don't think Legacy wants to force these people to upgrade to XP. It could be a costly mistake if they ended up loosing some of their files from other applications in the process. I hope this helps you Gwen (and maybe others running W98) to at least monitor the memory usage and to determine the applications that may be using a lot of resource memory. I would be suspicious of any of the Norton applications that may be running. Les - Original Message - From: "Noddie" <[EMAIL PROTECTED]> To: Sent: Friday, September 29, 2006 6:02 PM Subject: Re: [LegacyUG] Error 2147024882 > Hi Les > Thanks heaps for that, I would not think Legacy would put out a program > update which > was not compatible with Win98SE, as most people are still on that, I think. > I am going to do a few more things today to see if I can alleviate the > problem. > Keep you posted. > Thanks heaps > Gwen > > > - Original Message - > From: "Leslie E. Buege" <[EMAIL PROTECTED]> > To: > Sent: Saturday, September 30, 2006 1:32 AM > Subject: Re: [LegacyUG] Error 2147024882 > > > The problem is most likely a "memory leak" which is a Legacy problem. > I too am using W98se with 512 meg of memory. I didn't have this problem with > version 5. > I doubt if there is anything the user can do to eliminate this problem - > only the Legacy programmers can fix this. > Les > > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.407 / Virus Database: 268.12.9/458 - Release Date: 9/27/06 > > > > Legacy User Group guidelines can be found at: > http://www.LegacyFamilyTree.com/Etiquette.asp > > To find past messages, pl
Re: [LegacyUG] no pictures - sometimes
Hi Ron Thankyou for your email. That is okay. I am running Win98 SE and my ram is 512MB. I have recently exported my records and then imported them again, and although this has alleviated some of the problems I still do have errors. The main one is when I ask for a Preview/screen print of any report I cannot get the pictures to show, only placeholders and borders. When I take a report to Html, Pdf I get the pictures. The Preview/screen option is intermittent and I have been able to get images in view about 3 times, (in about 3 dozen that I have tried.) Thanks for your interest Gwen - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Monday, October 02, 2006 8:22 PM Subject: RE: [LegacyUG] no pictures - sometimes Gwen, If you have previously given this information then my apologies. On the face of it you may have a memory problem. What is you OS and RAM size please? Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blogs: Transparency with The GIMP, Downloadable UK History Timeline * Includes the family tree for Alan J Grimshaw http://myweb.tiscali.co.uk/fergys/Grimshaw/ __ >From: "Noddie" <[EMAIL PROTECTED]> >Reply-To: LegacyUserGroup@legacyfamilytree.com >To: >Subject: [LegacyUG] no pictures - sometimes >Date: Mon, 2 Oct 2006 15:44:41 +1300 > >Hi again >I am still trying to resolve my issues with Legacy :) >I have now uninstalled - through Control panel etc >Re-installed into a completely new folder and upgraded to the latest build >I am still have runtime errors. >I also note that I cannot get pictures to show up in Publishing center, if >I view using screen/printer view >I do note however, that if I do a pdf or Html file I can view the >photos/info and then can print them. >I wonder if anyone else has this problem? It happens with all reports. >I also get back icons plaguing me too. >Thanks for your help >Gwen _ Windows LiveT Messenger has arrived. Click here to download it for free! http://imagine-msn.com/messenger/launch80/?locale=en-gb Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Error 2147024882
Hi Les I cannot thank you enough for your wonderful email, and the time it must have taken. You went into depth and I understand things much better now. I was too experiencing problems with ver 5 and this is replicated in ver 6 I find it strange that I can view pictures in page I create to Html or Pdf but not when I ask to Preview/screen print. I cannot find out how to extract the Resource Meter, as it is in a cab file. I am trying to find out which one it would be in. I did what you said, but when I got to the have disk part, it just sits there, as I believe I need to instruct where about the file. As it is compressed I need to extract the cab file first I believe. Still working on that one. I too believe that there is a memory leak of some sort, as the reading I have don on the internet which presents this problem, indicates such. I shall persevere with this. I have tried all that has been asked and also exported my records and imported them back in again. This has helped a little. Though I do still have errors. Thanks once again truly wonderful. Gwen - Original Message - From: "Leslie E. Buege" <[EMAIL PROTECTED]> To: Sent: Tuesday, October 03, 2006 5:44 AM Subject: Re: [LegacyUG] Error 2147024882 Gwen, The problem with W98 is the memory that is used to keep track of running applications like Legacy Family Tree. This is a fixed amount of memory that is not affected my the amount of RAM your computer has. It can not be changed. The information stored there is dynamic in nature so when an application (or part of an application) closes down, memory used by that application should be released. If it isn't, eventually you run out of "system resources". My experience has been that version 6 apparently has problems with releasing used resources when moving from one part of the application to another. This even happens when using the same features I used in version 5. So it doesn't seem to be associated with the new features of version 6. Since I run a dual boot system (meaning I also have XP on the same computer) if I need to, I just reboot into XP to finish my task at hand. (For those of you who are interested, I access the same data file from W98 and XP). Gwen, what I suggest is that you do is what I have done. Microsoft has provided a handy resource monitoring application called the "Resource Meter". When running, it resides in the system tray down by the clock. You should be able to find "Resource Meter" by going to Start - Programs - Accessories - System Tools. If it isn't there, you can create a shortcut on your desktop by right clicking on the file name and selecting "send to" and then "desktop (short cut)". The file name is RSRCMTR.EXE and is located in the C:\Windows folder. I have the application start up when booting my computer because I put the shortcut in the "Startup" folder. When "Resource Meter" is running, you will get a warning message when the resources get low. You might be able shut down other applications that are running at the time to free up resource memory that Legacy Family Tree needs. Or, exit Family Tree and reboot your computer to create the most free resource memory. For further reading, see: http://www.informationweek.com/story/showArticle.jhtml?articleID=17200581 I believe there must me a memory leak that needs to be fixed by the programmers. Using the same features in version 6 that were used in version 5 and running into memory resource problems would seem to indicate that something changed with how memory resources are now being used in version 6. I don't believe you should have to upgrade to XP to solve this problem. I also believe that there are a lot of Legacy uses that wouldn't have a clue as to how to upgrade to XP especially if they are senior citizens like me. I don't think Legacy wants to force these people to upgrade to XP. It could be a costly mistake if they ended up loosing some of their files from other applications in the process. I hope this helps you Gwen (and maybe others running W98) to at least monitor the memory usage and to determine the applications that may be using a lot of resource memory. I would be suspicious of any of the Norton applications that may be running. Les - Original Message - From: "Noddie" <[EMAIL PROTECTED]> To: Sent: Friday, September 29, 2006 6:02 PM Subject: Re: [LegacyUG] Error 2147024882 > Hi Les > Thanks heaps for that, I would not think Legacy would put out a program > update which > was not compatible with Win98SE, as most people are still on that, I think. > I am going to do a few more things today to see if I can alleviate the > problem. > Keep you posted. > Thanks heaps > Gwen > > > - Original Message - > From: "Leslie E. Buege" <[EMAIL PROTECTED]> > To: > Sent: Saturday, September 30,
[LegacyUG] Cannget get backup to save
Hi again I am having trouble with Legacy remembering to ask to back-up. Is there a problem with this. Sometimes it does it and other times it chooses not to ask. Thanks for your help Gwen PS as I have not had to customise for save since ver5 I do not know where to go to ask it to do this automatically. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] no pictures - sometimes
Hi again I am still trying to resolve my issues with Legacy :) I have now uninstalled - through Control panel etc Re-installed into a completely new folder and upgraded to the latest build I am still have runtime errors. I also note that I cannot get pictures to show up in Publishing center, if I view using screen/printer view I do note however, that if I do a pdf or Html file I can view the photos/info and then can print them. I wonder if anyone else has this problem? It happens with all reports. I also get back icons plaguing me too. Thanks for your help Gwen Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Error 2147024882
Hi Les Thanks heaps for that, I would not think Legacy would put out a program update which was not compatible with Win98SE, as most people are still on that, I think. I am going to do a few more things today to see if I can alleviate the problem. Keep you posted. Thanks heaps Gwen - Original Message - From: "Leslie E. Buege" <[EMAIL PROTECTED]> To: Sent: Saturday, September 30, 2006 1:32 AM Subject: Re: [LegacyUG] Error 2147024882 The problem is most likely a "memory leak" which is a Legacy problem. I too am using W98se with 512 meg of memory. I didn't have this problem with version 5. I doubt if there is anything the user can do to eliminate this problem - only the Legacy programmers can fix this. Les -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.407 / Virus Database: 268.12.9/458 - Release Date: 9/27/06 Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Publishing centre and pictures
Hi Clarence Thankyou for your reply. I did wonder about W98SE as this is what I have. I have 512 mb of ram, and now have 1.7 GB free space., and still I am having trouble. I am also getting an error 91, now. It seems the more I try to fix or use the program the more error messages I am getting. I am not able to upgrade to XP or any other just yet, and wonder what to do. Legacy keeps closing down with certain errors, and this is very frustrating. I did get one picture to show on an individual screen, and now I cannot get any again. At a loss Thanks heaps however Gwen - Original Message - From: Clarence Mundt To: LegacyUserGroup@legacyfamilytree.com Sent: Friday, September 29, 2006 6:34 PM Subject: Re: [LegacyUG] Publishing centre and pictures Gwen; I was wandering what operating system you are running.. This sounds link a W98SE type resource problem... I run a P3 with 512M and still ran into this problem... It would show some pictures, but not all... or error 7 out The problem is the way W98 does memory mapping I upgrade to W2K, which does it like XP (sort of.. based on NT) and now Legacy runs just fine... I still miss my W98. Clarence - Original Message - From: Noddie To: LegacyUserGroup@legacyfamilytree.com Sent: Thursday, September 28, 2006 7:40 PM Subject: Re: [LegacyUG] Publishing centre and pictures Hi again BrianI went to the page and checked the errors, but it did not mention a 'Runtimeerror 7' only error 7.I checked the requirements before I upgraded, and have 512 mb ram, and 1GBof space., ona Pentium 3 machine.I am still unable to get the pictures to show in any of the reports, whetherit be an individualor any other.I had this problem when I upgraded to version 5, and I think it might havehad something to do withthe .usr files? I found a copy of these in a new directory off legacy I hadmade, and that is whatmade me wonder if that was the fix. Do you have any other ideas, as themain reason for myupgrading is I need to printout and publish par to my FH for an Aunt, who isaging, and I wouldlike to give her, her side of the family before too much longer.Thanks for your timeRegardsGwen- Original Message - From: "Brian/Support" <[EMAIL PROTECTED]>To: <LegacyUserGroup@legacyfamilytree.com>Sent: Friday, September 29, 2006 2:42 AMSubject: Re: [LegacyUG] Publishing centre and picturesOn the Legacy Home tab, click on the "Online Troubleshooting Help" linkand on the webpage, select Solutions by Error NumberError 7 is an out of memory error. Did you check the system requirementsbefore you upgraded to Version 6.0 Minimum memory is 256 MB and if youuse a motherboard with onboard video some of your main memory is stolenby the video so even more than 256 MB might be needed in that case.BrianCustomer SupportMillennia Corporation[EMAIL PROTECTED]http://www.LegacyFamilyTree.comWe are changing the world of genealogy!When replying to this message, please include all previous correspondence.Thanks.Noddie wrote:> Hi>> I have just installed the deluxe version 6 and updated the program to thenewest version. I am having trouble with Runtime error 7. This could be amemory problem on my part. Beside that I cannot get my pictures to show upwhen I go to the Publishing centre report, and select the Family picturetree, and then preview I cannot get any picture into he boxes when thisreport is generated. I had this problem when I upgraded to version 5 butcannot remember how this was fixed. Any clues or help would be greatlyappreciated.>> Cheers>> GwenLegacy User Group guidelines can be found at:http://www.LegacyFamilyTree.com/Etiquette.aspTo find past messages, please go to our searchable archives at:http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/For online technical support, please visithttp://www.LegacyFamilyTree.com/Help.aspTo unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.aspLegacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.aspTo find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/For online technical support, please visit http://www.LegacyFamilyTree.com/Help.aspTo unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.Le
Re: [LegacyUG] Error 2147024882
Thankyou for that. I have done some major cleaning up of my harddrive, and still have not been able to fix my problems. I am still not sure what 'system resources' are and how to check them and or fix the problem. Thanks for your help and interest. Gwen - Original Message - From: "Evert van Dijken" <[EMAIL PROTECTED]> To: Sent: Friday, September 29, 2006 6:18 PM Subject: Re: [LegacyUG] Error 2147024882 That's an out of memory or system resources error. Evert 2006/9/29, Noddie <[EMAIL PROTECTED]>: > > Hello again > I am a nuisance. I am still having errors even though I shutdown all the > programs which I am not using whilst > I am running Legacy. > It is 2147024882 (80070003) this is how it is presented to me. > I am at a loss what this is as it it not mentioned in the online help files. > Ta > Gwen > > Legacy User Group guidelines can be found at: > http://www.LegacyFamilyTree.com/Etiquette.asp > > To find past messages, please go to our searchable archives at: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > > For online technical support, please visit > http://www.LegacyFamilyTree.com/Help.asp > > To unsubscribe please visit: > http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Stil cannot get pictures
Hi again Sorry to be a nuisance, but I have spent the last hour or so, taking off programs from my computer to allow enough space for my FH Legacy to run. I now have 1.7GB and still no pictures. This is frustrating me, and I am at a loss as what to do next. 1. Can I delete the USR files, Legacy 1,2,3,4,5,6 and 7 and would this make a difference. I understand they re-appear once you start legacy again. 2. Or do I need to uninstall Legacy again, and start over. Thanks heaps Gwen Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Error 2147024882
Hello again I am a nuisance. I am still having errors even though I shutdown all the programs which I am not using whilst I am running Legacy. It is 2147024882 (80070003) this is how it is presented to me. I am at a loss what this is as it it not mentioned in the online help files. Ta Gwen Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Publishing centre and pictures
Hi again Brian I went to the page and checked the errors, but it did not mention a 'Runtime error 7' only error 7. I checked the requirements before I upgraded, and have 512 mb ram, and 1GB of space., on a Pentium 3 machine. I am still unable to get the pictures to show in any of the reports, whether it be an individual or any other. I had this problem when I upgraded to version 5, and I think it might have had something to do with the .usr files? I found a copy of these in a new directory off legacy I had made, and that is what made me wonder if that was the fix. Do you have any other ideas, as the main reason for my upgrading is I need to printout and publish par to my FH for an Aunt, who is aging, and I would like to give her, her side of the family before too much longer. Thanks for your time Regards Gwen - Original Message - From: "Brian/Support" <[EMAIL PROTECTED]> To: Sent: Friday, September 29, 2006 2:42 AM Subject: Re: [LegacyUG] Publishing centre and pictures On the Legacy Home tab, click on the "Online Troubleshooting Help" link and on the webpage, select Solutions by Error Number Error 7 is an out of memory error. Did you check the system requirements before you upgraded to Version 6.0 Minimum memory is 256 MB and if you use a motherboard with onboard video some of your main memory is stolen by the video so even more than 256 MB might be needed in that case. Brian Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Noddie wrote: > Hi > > I have just installed the deluxe version 6 and updated the program to the newest version. I am having trouble with Runtime error 7. This could be a memory problem on my part. Beside that I cannot get my pictures to show up when I go to the Publishing centre report, and select the Family picture tree, and then preview I cannot get any picture into he boxes when this report is generated. I had this problem when I upgraded to version 5 but cannot remember how this was fixed. Any clues or help would be greatly appreciated. > > Cheers > > Gwen Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Publishing centre and pictures
Hi I have just installed the deluxe version 6 and updated the program to the newest version. I am having trouble with Runtime error 7. This could be a memory problem on my part. Beside that I cannot get my pictures to show up when I go to the Publishing centre report, and select the Family picture tree, and then preview I cannot get any picture into he boxes when this report is generated. I had this problem when I upgraded to version 5 but cannot remember how this was fixed. Any clues or help would be greatly appreciated. Cheers Gwen Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp