Re: [LegacyUG] Sourcing

[Cathy Pinner]

Elizabeth,

As you go through your file, make sure you tag those people you have 
completed checking and/or if you go through Master Source by Master 
Source, tag the source when it's done.


I'm slowly checking very, very old sources from when I didn't understand 
the source and also sources where only transcriptions were available at 
the time but now I can see the originals. I use the Show List and tag 
the people using the source. If when I finish updating this particular 
source, all their other sources are already OK, I tag them on tag 9. Not 
enough people tagged on 9 yet ;)


Cathy

Elizabeth Lindsay wrote:


Thanks, Cathy.

The sad thing is that when I started family history years ago, there
were no computers, and then as things progressed, the ability to do
more and more with greater degrees of accuracy and references
developed amazingly. But… as I transitioned through a couple of
different programs some of the data transfer and referencing did not
happen as it should so I now realize that I will have to set aside an
enormous amount of time to go through and put it to rights.

Elizabeth

*From:*LegacyUserGroup
[mailto:legacyusergroup-boun...@legacyusers.com] *On Behalf Of *Cathy
Pinner
*Sent:* Wednesday, 28 September 2016 10:49 AM
*To:* Legacy User Group 
*Subject:* Re: [LegacyUG] Incompatibility with Windows 10? and
Clipboard question

Elizabeth,
I'm one of them.
Say I'm entering a Source that is an Index rather than a transcription
- like South Australian Birth, Death or Marriage Indexes on FindMyPast.

I find the entry on FindMyPast and I copy the whole entry and then
names and dates and locations that I require either for data entry or
to complete my Source.
Then I start entering the data in Legacy. I set up the Source
Clipboard putting the whole entry in the Source Detail text and making
up the Source Detail with a combination of some of what I've copied
and boiler text I have previously saved in the M8 clipboard which
shows in a different column.
Then I enter the data again just pasting the relevant dates and names
from the M8 clipboard and source it all with the Source Clipboard that
I've set up.
So I only have to look at my source on FindMyPast once rather than go
to and fro - and t he typing I need to do on data entry is minimal to
none.
The M8 clipboard sits where you put it and on top of other windows so
is easily accessible - or when you're not using it you can minimise it
to Taskbar or System Tray.

Cathy

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Sourcing

[Elizabeth Lindsay]

Thanks, Cathy.

The sad thing is that when I started family history years ago, there were no 
computers, and then as things progressed, the ability to do more and more with 
greater degrees of accuracy and references developed amazingly. But… as I 
transitioned through a couple of different programs some of the data transfer 
and referencing did not happen as it should so I now realize that I will have 
to set aside an enormous amount of time to go through and put it to rights.

 

Elizabeth

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Cathy Pinner
Sent: Wednesday, 28 September 2016 10:49 AM
To: Legacy User Group 
Subject: Re: [LegacyUG] Incompatibility with Windows 10? and Clipboard question

 

Elizabeth,
I'm one of them.
Say I'm entering a Source that is an Index rather than a transcription - like 
South Australian Birth, Death or Marriage Indexes on FindMyPast.

I find the entry on FindMyPast and I copy the whole entry and then names and 
dates and locations that I require either for data entry or to complete my 
Source.
Then I start entering the data in Legacy. I set up the Source Clipboard putting 
the whole entry in the Source Detail text and making up the Source Detail with 
a combination of some of what I've copied and boiler text I have previously 
saved in the M8 clipboard which shows in a different column.
Then I enter the data again just pasting the relevant dates and names from the 
M8 clipboard and source it all with the Source Clipboard that I've set up.
So I only have to look at my source on FindMyPast once rather than go to and 
fro - and t he typing I need to do on data entry is minimal to none.
The M8 clipboard sits where you put it and on top of other windows so is easily 
accessible - or when you're not using it you can minimise it to Taskbar or 
System Tray.

Cathy




-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10? and Clipboard question

[Cathy Pinner]

Elizabeth,
I'm one of them.
Say I'm entering a Source that is an Index rather than a transcription - 
like South Australian Birth, Death or Marriage Indexes on FindMyPast.


I find the entry on FindMyPast and I copy the whole entry and then names 
and dates and locations that I require either for data entry or to 
complete my Source.
Then I start entering the data in Legacy. I set up the Source Clipboard 
putting the whole entry in the Source Detail text and making up the 
Source Detail with a combination of some of what I've copied and boiler 
text I have previously saved in the M8 clipboard which shows in a 
different column.
Then I enter the data again just pasting the relevant dates and names 
from the M8 clipboard and source it all with the Source Clipboard that 
I've set up.
So I only have to look at my source on FindMyPast once rather than go to 
and fro - and the typing I need to do on data entry is minimal to none.
The M8 clipboard sits where you put it and on top of other windows so is 
easily accessible - or when you're not using it you can minimise it to 
Taskbar or System Tray.


Cathy

Elizabeth Lindsay wrote:


I have Windows 10 and find this problem occurs intermittently with a
number of programs/apps including Outlook, so for me it is not just a
Legacy problem.

To the lady who talked about using M8 Free Clipboard: would you mind
explaining in more detail how you use the program for sourcing. I
thought my system was working well, but now realize that I could do a
lot better if I tried the clipboard.

Thanks,

Elizabeth

*From:*LegacyUserGroup
[mailto:legacyusergroup-boun...@legacyusers.com] *On Behalf Of *Brian
Lightfoot
*Sent:* Wednesday, 28 September 2016 12:56 AM
*To:* 'Legacy User Group' 
*Subject:* Re: [LegacyUG] Incompatibility with Windows 10?

I recall that annoyance with resizing the Legacy window as having been
around since at least Legacy version 7. I typically use a split screen
mode with Legacy taking up ½ and a browser window on the other half.
But whenever I have to resize the Legacy window, it takes several
mouse attempts with it just springing back to its original size. In
other words, the resizing attempt does not stick until the 3^rd or
4^th attempt. Certainly not life threatening but merely annoying.
Legacy is the only application that exhibits this behavior. It has
nothing to do with Windows 10.

Brian in CA

*From:*LegacyUserGroup
[mailto:legacyusergroup-boun...@legacyusers.com] *On Behalf Of
*Richard Van Wasshnova
*Sent:* Tuesday, September 27, 2016 7:38 AM
*To:* Legacy User Group
*Subject:* Re: [LegacyUG] Incompatibility with Windows 10?

I've noticed when resizing Legacy with the mouse on the edge if I hold
the mouse button down after I stop sliding up or down it jumps back to
the original size. I have to release the button as soon as I stop
sliding the mouse.

I just checked my laptop and it resizes OK. I can resize and hold the
button and it stays there. Both are Win 10.

The desktop computer resizes other programs fine, Only Legacy exhibits
this problem.

On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin
mailto:sarrazingeor...@gmail.com>> wrote:

Under Windows 10, when ones tries to go to a smaller window, the
process is not fluid as it is with other programs.

There is a time delay and the passage from one level to the other goes
by step.

It is the same thing with both v8 and v9.

There seems to be a sort of incompatibility between Windows 10 and Legacy.

Am I the only one to see this problem?

Georges


--
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Ian Thomas]

I have none of these problems (see Brian’s post below; all other posts trimmed 
off). There has been an occasional slowness in redrawing all the screen 
components in Legacy – but I believe that is related to memory leaks in 
Internet Explorer 11 when I have an excessive number of browser windows open in 
it. That is not unique to Windows 10, either. 

I have Windows 10 Professional 64-bit installed on this older computer, on an 
SSD (solid state) drive. 

It may be that despite its age (assembled in January 2012 – certainly not with 
the “latest” components as I could not afford them), it has quite good graphics 
and memory (RAM). 

I use Legacy v8.0 Deluxe. I can use the mouse to grab it from any corner or 
side and resize, etc. That happens quickly, no flickers or movements out of my 
control. I have no complaints.  

As a software application (leaving aside its purpose and functionality), Legacy 
is not at all demanding on Windows or hardware. 

 

Ian Thomas

Albert Park, Victoria 3206 Australia

 

[my modest 2012-assembled, mid-cost computer: Asus F1A75-V PRO desktop 
motherboard, AMD Fusion A8-3870 FM1 3GHZ QuadCore CPU,

16GB Kingston 1333MHz DDR3 memory, Crucial 250GB SSD (added July 2015), several 
additional 2Tb/3Tb HDD, Dell 2007WFP monitor. ] 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Brian Lightfoot
Sent: Wednesday, 28 September 2016 5:44 AM
To: 'Legacy User Group' 
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

The full size window is not the problem (just click the gadget in the upper 
right corner). But try making your Legacy window take up only the left half of 
your monitor screen. Click the gadget in the upper right of a full size Legacy 
window (if you hold your mouse over the gadget which looks like 2 sheets of 
paper it will read out as “Restore Down”). Now, regardless of what size Legacy 
automatically resized down to, try to change that size by moving the mouse on 
an edge of the Legacy window until the cursor changes to a double ended arrow 
and then click and hold down the mouse button dragging that edge to somewhere 
you want for the resized window. Release the mouse button and you expect the 
newly resized window to remain there but the chances are that it will spring 
back to where it was before. It may take 3 or 4 attempts until it sticks.

 

Try that same resizing movement on the windows of other applications and you 
may notice that they tend to stick when the mouse is released without springing 
back to its previous position.

 

As I said before, it’s not a critical error…just annoying for those users that 
want a custom size window from time to time.

 

Brian in CA

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Bob Austen]

I use Windows 10.  It would seem that the sizing 'issue' is only with
Legacy.  All other windows will size smoothly (for me) without any 'snap
back'.  It doesn't matter if I have Windows Snap turned off or on. To me it
is not an issue after the initial setup - I don't bother to change the
window size.  

 

I also have a dual monitor setup (scrimped on the pizza) and have no issues
with smooth movement between monitors.  A note here - if you are going to
dual monitors get two the same if you can manage it.  I have two Samsung 24"
monitors but one is older, with a slightly different aspect ratio, so a
widow on one won't size properly on the second.

 

Bob Austen

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
Behalf Of Brian Lightfoot
Sent: Tuesday, September 27, 2016 6:11 PM
To: 'Legacy User Group'
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

Everybody's RAM is "solid state". For what it's worth, I recently switched
to a new system using M.2 PCI drives (SSD) instead of HDDs yet the springy
resizing problem continued. I've gotten a few emails from others who claim
they have no problems. I'm beginning to wonder if the problem isn't with the
mouse or more properly, the mouse driver. I've always used a Logitech mouse
but as far as I know the window resizing thing is a Windows functionality.
Legacy only stores the coordinates of the last window in one of its users
files. But you'd think that if it is a mouse issue, then the problem would
be typical across all applications. Oh well, there are more pressing issues
to deal with.

 

I've been wanting to go to a dual monitor setup for a few months now but
until my existing monitor shows signs of faulty display, I'm stuck with
using a split window setup. Well, not really stuck. I could always just
throw out the existing and bite the bullet by purchasing two new ones. But
I've got better things to do with my money like pizza, more pizza, etc.

 

Brian in CA

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
Behalf Of CE WOOD
Sent: Tuesday, September 27, 2016 5:21 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

Interestingly, I have none of the problems mentioned. I wonder if memory and
RAM is an issue. Mine is all solid state = instantaneous.

 

CE

  _  

From: LegacyUserGroup  on behalf of
Sherry 
Sent: Tuesday, September 27, 2016 4:42 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10? 

 

I find it particular bad when moving the window between monitors, esp
if I'm not patient enough to let the window fully open!

FireFox doesn't behave correctly either. It gets real jerky moving it about.

Win10

Sherry



On Tue, Sep 27, 2016 at 3:09 PM, Cliff Gittens
 wrote:
> I also experience the same window sizing problem with Legacy.  It has only
> started since I upgraded to W10.  I notice it most after I snap the Legacy
> window to one side of the screen.  Legacy then by itself reshapes taking
> only 1/4 of the screen area.  No matter how many times you try to drag the
> window down to take up a full 1/2 of the screen it just snaps back up to
the
> 1/4 size.
>
> I just don't use the split screen as I now have a second monitor.
>
> Cliff Gittens
>
> bkalm@

-- 



-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Ila East]

Sent from my iPad

> On Sep 27, 2016, at 6:42 PM, Sherry  wrote:
> 
> I find it particular bad when moving the window between monitors, esp
> if I'm not patient enough to let the window fully open!
> 
> FireFox doesn't behave correctly either. It gets real jerky moving it about.
> 
> Win10
> 
> Sherry
> 
> 
> 
> On Tue, Sep 27, 2016 at 3:09 PM, Cliff Gittens
>  wrote:
>> I also experience the same window sizing problem with Legacy.  It has only
>> started since I upgraded to W10.  I notice it most after I snap the Legacy
>> window to one side of the screen.  Legacy then by itself reshapes taking
>> only 1/4 of the screen area.  No matter how many times you try to drag the
>> window down to take up a full 1/2 of the screen it just snaps back up to the
>> 1/4 size.
>> 
>> I just don't use the split screen as I now have a second monitor.
>> 
>> Cliff Gittens
>> 
>> bkalm@
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Gene Young]

On 9/27/2016 6:09 PM, Cliff Gittens wrote:

I also experience the same window sizing problem with Legacy.  It has only 
started since I upgraded to W10.  I notice it most after I snap the Legacy 
window to one side of the screen.  Legacy then by itself reshapes taking only 
1/4 of the screen area.  No matter how many times you try to drag the window 
down to take up a full 1/2 of the screen it just snaps back up to the 1/4 size.

I just don't use the split screen as I now have a second monitor.

Cliff Gittens


bk...@comcast.net 
Tuesday, September 27, 2016 1:41 PM
I have the same problem when I try to resize my Legacy screen!




If you drag it to a corner it will size to the corner.  Drag to the center of 
the side and it will snap to half size and present the option of selecting 
another window to snap to the opposite side.  The position of the cursor when 
it reaches the side determines the action.


--

Gene Young
Researching Young, Harer, Cox & Sallada
With Legacy Family Tree
http://myyoungs.atspace.com/index.htm

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Brian Lightfoot]

Everybody's RAM is "solid state". For what it's worth, I recently switched
to a new system using M.2 PCI drives (SSD) instead of HDDs yet the springy
resizing problem continued. I've gotten a few emails from others who claim
they have no problems. I'm beginning to wonder if the problem isn't with the
mouse or more properly, the mouse driver. I've always used a Logitech mouse
but as far as I know the window resizing thing is a Windows functionality.
Legacy only stores the coordinates of the last window in one of its users
files. But you'd think that if it is a mouse issue, then the problem would
be typical across all applications. Oh well, there are more pressing issues
to deal with.

 

I've been wanting to go to a dual monitor setup for a few months now but
until my existing monitor shows signs of faulty display, I'm stuck with
using a split window setup. Well, not really stuck. I could always just
throw out the existing and bite the bullet by purchasing two new ones. But
I've got better things to do with my money like pizza, more pizza, etc.

 

Brian in CA

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
Behalf Of CE WOOD
Sent: Tuesday, September 27, 2016 5:21 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

Interestingly, I have none of the problems mentioned. I wonder if memory and
RAM is an issue. Mine is all solid state = instantaneous.

 

CE

  _  

From: LegacyUserGroup  on behalf of
Sherry 
Sent: Tuesday, September 27, 2016 4:42 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10? 

 

I find it particular bad when moving the window between monitors, esp
if I'm not patient enough to let the window fully open!

FireFox doesn't behave correctly either. It gets real jerky moving it about.

Win10

Sherry



On Tue, Sep 27, 2016 at 3:09 PM, Cliff Gittens
 wrote:
> I also experience the same window sizing problem with Legacy.  It has only
> started since I upgraded to W10.  I notice it most after I snap the Legacy
> window to one side of the screen.  Legacy then by itself reshapes taking
> only 1/4 of the screen area.  No matter how many times you try to drag the
> window down to take up a full 1/2 of the screen it just snaps back up to
the
> 1/4 size.
>
> I just don't use the split screen as I now have a second monitor.
>
> Cliff Gittens
>
> bkalm@

-- 




-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Legacy and Clooz

[June]

I have just been looking at the Webinair of using Clooz with Legacy.

I would be interested in hearing from anyone who uses the two together and
whether there is a benefit to using them, or is it as easy to just enter
items directly into Legacy.

Thank you - June
  


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[CE WOOD]

Interestingly, I have none of the problems mentioned. I wonder if memory and 
RAM is an issue. Mine is all solid state = instantaneous.


CE


From: LegacyUserGroup  on behalf of 
Sherry 
Sent: Tuesday, September 27, 2016 4:42 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

I find it particular bad when moving the window between monitors, esp
if I'm not patient enough to let the window fully open!

FireFox doesn't behave correctly either. It gets real jerky moving it about.

Win10

Sherry



On Tue, Sep 27, 2016 at 3:09 PM, Cliff Gittens
 wrote:
> I also experience the same window sizing problem with Legacy.  It has only
> started since I upgraded to W10.  I notice it most after I snap the Legacy
> window to one side of the screen.  Legacy then by itself reshapes taking
> only 1/4 of the screen area.  No matter how many times you try to drag the
> window down to take up a full 1/2 of the screen it just snaps back up to the
> 1/4 size.
>
> I just don't use the split screen as I now have a second monitor.
>
> Cliff Gittens
>
> bkalm@

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
LegacyUserGroup - Legacy Family Tree Genealogy 
Software
legacyusers.com
This list is a mailing list for all of our Legacy users to share ideas and to 
help each other. Once you have subscribed to this mailing list you will be able 
to send ...


Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
legacyusergroup - The Mail 
Archive
www.mail-archive.com
Messages by Thread [LegacyUG] Finding Evidence of Kinship in Military Records - 
free BCG webinar by Rick Sayre now online for limited time Geoff Rasmussen


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Sherry]

I find it particular bad when moving the window between monitors, esp
if I'm not patient enough to let the window fully open!

FireFox doesn't behave correctly either. It gets real jerky moving it about.

Win10

Sherry



On Tue, Sep 27, 2016 at 3:09 PM, Cliff Gittens
 wrote:
> I also experience the same window sizing problem with Legacy.  It has only
> started since I upgraded to W10.  I notice it most after I snap the Legacy
> window to one side of the screen.  Legacy then by itself reshapes taking
> only 1/4 of the screen area.  No matter how many times you try to drag the
> window down to take up a full 1/2 of the screen it just snaps back up to the
> 1/4 size.
>
> I just don't use the split screen as I now have a second monitor.
>
> Cliff Gittens
>
> bkalm@

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Leonard J. McCown]

Thanks Brian! Works like a charm. Leonard

 

­

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Brian Lightfoot
Sent: Tuesday, September 27, 2016 2:44 PM
To: 'Legacy User Group'
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

The full size window is not the problem (just click the gadget in the upper 
right corner). But try making your Legacy window take up only the left half of 
your monitor screen. Click the gadget in the upper right of a full size Legacy 
window (if you hold your mouse over the gadget which looks like 2 sheets of 
paper it will read out as “Restore Down”). Now, regardless of what size Legacy 
automatically resized down to, try to change that size by moving the mouse on 
an edge of the Legacy window until the cursor changes to a double ended arrow 
and then click and hold down the mouse button dragging that edge to somewhere 
you want for the resized window. Release the mouse button and you expect the 
newly resized window to remain there but the chances are that it will spring 
back to where it was before. It may take 3 or 4 attempts until it sticks.

 

Try that same resizing movement on the windows of other applications and you 
may notice that they tend to stick when the mouse is released without springing 
back to its previous position.

 

As I said before, it’s not a critical error…just annoying for those users that 
want a custom size window from time to time.

 

 

Brian in CA

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[John Francis]

As someone has said before, the trick seems to be to release the mouse 
button as soon as you reach the size you want. And that really means 
immediately! Any pause, and the window reverts to its original size.


Hope this helps.

John Francis in Suffolk, UK

On 27/09/2016 20:44, Brian Lightfoot wrote:


The full size window is not the problem (just click the gadget in the 
upper right corner). But try making your Legacy window take up only 
the left half of your monitor screen. Click the gadget in the upper 
right of a full size Legacy window (if you hold your mouse over the 
gadget which looks like 2 sheets of paper it will read out as “Restore 
Down”). Now, regardless of what size Legacy automatically resized down 
to, try to change that size by moving the mouse on an edge of the 
Legacy window until the cursor changes to a double ended arrow and 
then click and hold down the mouse button dragging that edge to 
somewhere you want for the resized window. Release the mouse button 
and you expect the newly resized window to remain there but the 
chances are that it will spring back to where it was before. It may 
take 3 or 4 attempts until it sticks.


Try that same resizing movement on the windows of other applications 
and you may notice that they tend to stick when the mouse is released 
without springing back to its previous position.


As I said before, it’s not a critical error…just annoying for those 
users that want a custom size window from time to time.


Brian in CA

*From:*LegacyUserGroup 
[mailto:legacyusergroup-boun...@legacyusers.com] *On Behalf Of *Joyce 
Herzog

*Sent:* Tuesday, September 27, 2016 11:25 AM
*To:* Legacy User Group
*Subject:* Re: [LegacyUG] Incompatibility with Windows 10?

I use Legacy 8 on my 19" monitor full size, and my browser fll size on 
my main 21" monitor. Running on Win10. :D.


Joyce

On Tue, Sep 27, 2016 at 12:56 PM, Brian Lightfoot 
mailto:br...@the-lightfoots.com>> wrote:


I recall that annoyance with resizing the Legacy window as having been 
around since at least Legacy version 7. I typically use a split screen 
mode with Legacy taking up ½ and a browser window on the other half. 
But whenever I have to resize the Legacy window, it takes several 
mouse attempts with it just springing back to its original size. In 
other words, the resizing attempt does not stick until the 3^rd or 
4^th attempt. Certainly not life threatening but merely annoying. 
Legacy is the only application that exhibits this behavior. It has 
nothing to do with Windows 10.


Brian in CA

*From:*LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com 
] *On Behalf Of 
*Richard Van Wasshnova

*Sent:* Tuesday, September 27, 2016 7:38 AM
*To:* Legacy User Group
*Subject:* Re: [LegacyUG] Incompatibility with Windows 10?

I've noticed when resizing Legacy with the mouse on the edge if I hold 
the mouse button down after I stop sliding up or down it jumps back to 
the original size. I have to release the button as soon as I stop 
sliding the mouse.


I just checked my laptop and it resizes OK. I can resize and hold the 
button and it stays there. Both are Win 10.


The desktop computer resizes other programs fine, Only Legacy exhibits 
this problem.


On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin 
mailto:sarrazingeor...@gmail.com>> wrote:


Under Windows 10, when ones tries to go to a smaller window, the 
process is not fluid as it is with other programs.


There is a time delay and the passage from one level to the other goes 
by step.


It is the same thing with both v8 and v9.

There seems to be a sort of incompatibility between Windows 10 and Legacy.

Am I the only one to see this problem?

Georges







-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Brian Lightfoot]

The full size window is not the problem (just click the gadget in the upper 
right corner). But try making your Legacy window take up only the left half of 
your monitor screen. Click the gadget in the upper right of a full size Legacy 
window (if you hold your mouse over the gadget which looks like 2 sheets of 
paper it will read out as “Restore Down”). Now, regardless of what size Legacy 
automatically resized down to, try to change that size by moving the mouse on 
an edge of the Legacy window until the cursor changes to a double ended arrow 
and then click and hold down the mouse button dragging that edge to somewhere 
you want for the resized window. Release the mouse button and you expect the 
newly resized window to remain there but the chances are that it will spring 
back to where it was before. It may take 3 or 4 attempts until it sticks.

 

Try that same resizing movement on the windows of other applications and you 
may notice that they tend to stick when the mouse is released without springing 
back to its previous position.

 

As I said before, it’s not a critical error…just annoying for those users that 
want a custom size window from time to time.

 

 

Brian in CA

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Joyce Herzog
Sent: Tuesday, September 27, 2016 11:25 AM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

I use Legacy 8 on my 19" monitor full size, and my browser fll size on my main 
21" monitor. Running on Win10. :D.

Joyce

 

On Tue, Sep 27, 2016 at 12:56 PM, Brian Lightfoot  
wrote:

I recall that annoyance with resizing the Legacy window as having been around 
since at least Legacy version 7. I typically use a split screen mode with 
Legacy taking up ½ and a browser window on the other half. But whenever I have 
to resize the Legacy window, it takes several mouse attempts with it just 
springing back to its original size. In other words, the resizing attempt does 
not stick until the 3rd or 4th attempt. Certainly not life threatening but 
merely annoying. Legacy is the only application that exhibits this behavior. It 
has nothing to do with Windows 10.

 

 

Brian in CA

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Richard Van Wasshnova
Sent: Tuesday, September 27, 2016 7:38 AM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

I've noticed when resizing Legacy with the mouse on the edge if I hold the 
mouse button down after I stop sliding up or down it jumps back to the original 
size. I have to release the button as soon as I stop sliding the mouse.

 

I just checked my laptop and it resizes OK. I can resize and hold the button 
and it stays there. Both are Win 10.

 

The desktop computer resizes other programs fine, Only Legacy exhibits this 
problem.

 

 

On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin  
wrote:

Under Windows 10, when ones tries to go to a smaller window, the process is not 
fluid as it is with other programs.

There is a time delay and the passage from one level to the other goes by step.

It is the same thing with both v8 and v9.

 

There seems to be a sort of incompatibility between Windows 10 and Legacy.

 

Am I the only one to see this problem?

 

Georges 





-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Denise Moss-Fritch]

Sherry,

Ah ha! So, _two_ Legacy Facebook sites. Well, that would explain what I found 
when following the link from the Legacy web site page and why there seemed to 
be no discussion location. Thanks.

Thanks too for the information about customizing software icons. I am familiar 
with that operation and have already used the option in the past. What I was 
thinking about was more the 'aged' appearance of the Legacy Home tab in the 
software. I was wondering why (or perhaps 'whether') the next version of the 
software would incorporate additional linking (displays) from other locations 
in the Internet. Seems only a few years ago that software development began 
including url links within their coding that offered a built in browser and 
address to mirror information (maps, tracking data, etc) from another location 
in the Internet.

Thanks for the response,

Denise

-Original Message-
From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Sherry
Sent: Tuesday, September 27, 2016 11:06 AM
To: Legacy User Group 
Subject: Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

Denise,

There are two Legacy FB groups - the one you link to on the website is the one 
the public site, which Geoff posts to, which is why it "matches" the Google+ 
site. Comments can be made on the posts, but users can't start a post.

The one for Legacy Users is a different one - it has 10,471 members and is way 
too active for my liking! You can read more about it at 
http://tinyurl.com/o5mc24p.  Why there's no direct link from the website is 
beyond me.

You can add two Custom links to the My Toolbar in Legacy. They can link to any 
of the social media sites. Go to Design (Upper right
corner) > Toolbars > My Toolbar. Follow the steps in the My Toolbar window and 
if you need help, the help topic is right there by clicking on the Help button, 
with great detail.

Anything coming in v9 is hush-hush except for same-sex and TMG import.

Sherry

On Tue, Sep 27, 2016 at 10:30 AM, Denise Moss-Fritch  
wrote:
> Interesting discussion. However, I would appreciate a bit more 
> information if possible.
>
> At the Legacy web site home page I note the icons (upper right corner) 
> for both Google + and Facebook. I’ve visited each and looked past the 
> two social groups’ advertisement to join, attempting to see what each 
> social group site offers.
>
> I did note that the Legacy site at Google + identifies about 2,600 
> followers, with the Facebook site identifying about 16,000 followers. ).
> Each social site seems to be ‘heavily’ graphic (photos and drawings) 
> and seems to mirror each other in content. Although with Google + 
> requiring selecting separate tiles to ‘follow’ a particular area of 
> information, actually see what the topics represent was a bit difficult.
>
> I did not see any user discussions at either social site (probably 
> because I am not a member of either. How different are the discussion 
> areas (content, graphics, etc) at each social site?
>
> So, what can followers of these two social sites tell me about the 
> advantages of each site?
>
> From an official company representative I also have a question. 
> Without disclosing (if possible) any plans for Legacy v9, are changes 
> possible to the Legacy Home tab in the software to accommodate (easy 
> access, replace contents, etc) in the software for access to social sites?
>
> Thanks,
>
> Denise

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Joyce Herzog]

I use Legacy 8 on my 19" monitor full size, and my browser fll size on my
main 21" monitor. Running on Win10. :D.

Joyce

On Tue, Sep 27, 2016 at 12:56 PM, Brian Lightfoot 
wrote:

> I recall that annoyance with resizing the Legacy window as having been
> around since at least Legacy version 7. I typically use a split screen mode
> with Legacy taking up ½ and a browser window on the other half. But
> whenever I have to resize the Legacy window, it takes several mouse
> attempts with it just springing back to its original size. In other words,
> the resizing attempt does not stick until the 3rd or 4th attempt.
> Certainly not life threatening but merely annoying. Legacy is the only
> application that exhibits this behavior. It has nothing to do with Windows
> 10.
>
>
>
>
>
> Brian in CA
>
>
>
>
>
> *From:* LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] *On
> Behalf Of *Richard Van Wasshnova
> *Sent:* Tuesday, September 27, 2016 7:38 AM
> *To:* Legacy User Group
> *Subject:* Re: [LegacyUG] Incompatibility with Windows 10?
>
>
>
> I've noticed when resizing Legacy with the mouse on the edge if I hold the
> mouse button down after I stop sliding up or down it jumps back to the
> original size. I have to release the button as soon as I stop sliding the
> mouse.
>
>
>
> I just checked my laptop and it resizes OK. I can resize and hold the
> button and it stays there. Both are Win 10.
>
>
>
> The desktop computer resizes other programs fine, Only Legacy exhibits
> this problem.
>
>
>
>
>
> On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin <
> sarrazingeor...@gmail.com> wrote:
>
> Under Windows 10, when ones tries to go to a smaller window, the process
> is not fluid as it is with other programs.
>
> There is a time delay and the passage from one level to the other goes by
> step.
>
> It is the same thing with both v8 and v9.
>
>
>
> There seems to be a sort of incompatibility between Windows 10 and Legacy.
>
>
>
> Am I the only one to see this problem?
>
>
>
> Georges
>
>
> --
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>


-- 
Researching Drinkwater surname all over the world, any time, any place, but
especially Descendants  and Ancestors of Paul Drinkwater, born 1789 in
Sandhurst, Gloucestershire, England. GOONS #5057
http://www.one-name.org/profiles/drinkwater.html
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Sherry]

Denise,

There are two Legacy FB groups - the one you link to on the website is
the one the public site, which Geoff posts to, which is why it
"matches" the Google+ site. Comments can be made on the posts, but
users can't start a post.

The one for Legacy Users is a different one - it has 10,471 members
and is way too active for my liking! You can read more about it at
http://tinyurl.com/o5mc24p.  Why there's no direct link from the
website is beyond me.

You can add two Custom links to the My Toolbar in Legacy. They can
link to any of the social media sites. Go to Design (Upper right
corner) > Toolbars > My Toolbar. Follow the steps in the My Toolbar
window and if you need help, the help topic is right there by clicking
on the Help button, with great detail.

Anything coming in v9 is hush-hush except for same-sex and TMG import.

Sherry

On Tue, Sep 27, 2016 at 10:30 AM, Denise Moss-Fritch
 wrote:
> Interesting discussion. However, I would appreciate a bit more information
> if possible.
>
> At the Legacy web site home page I note the icons (upper right corner) for
> both Google + and Facebook. I’ve visited each and looked past the two social
> groups’ advertisement to join, attempting to see what each social group site
> offers.
>
> I did note that the Legacy site at Google + identifies about 2,600
> followers, with the Facebook site identifying about 16,000 followers. ).
> Each social site seems to be ‘heavily’ graphic (photos and drawings) and
> seems to mirror each other in content. Although with Google + requiring
> selecting separate tiles to ‘follow’ a particular area of information,
> actually see what the topics represent was a bit difficult.
>
> I did not see any user discussions at either social site (probably because I
> am not a member of either. How different are the discussion areas (content,
> graphics, etc) at each social site?
>
> So, what can followers of these two social sites tell me about the
> advantages of each site?
>
> From an official company representative I also have a question. Without
> disclosing (if possible) any plans for Legacy v9, are changes possible to
> the Legacy Home tab in the software to accommodate (easy access, replace
> contents, etc) in the software for access to social sites?
>
> Thanks,
>
> Denise

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Denise Moss-Fritch]

Interesting discussion. However, I would appreciate a bit more information if 
possible.

 

At the Legacy web site home page I note the icons (upper right corner) for both 
Google + and Facebook. I’ve visited each and looked past the two social groups’ 
advertisement to join, attempting to see what each social group site offers.

 

I did note that the Legacy site at Google + identifies about 2,600 followers, 
with the Facebook site identifying about 16,000 followers. ). Each social site 
seems to be ‘heavily’ graphic (photos and drawings) and seems to mirror each 
other in content. Although with Google + requiring selecting separate tiles to 
‘follow’ a particular area of information, actually see what the topics 
represent was a bit difficult.

 

I did not see any user discussions at either social site (probably because I am 
not a member of either. How different are the discussion areas (content, 
graphics, etc) at each social site?

 

So, what can followers of these two social sites tell me about the advantages 
of each site?

 

>From an official company representative I also have a question. Without 
>disclosing (if possible) any plans for Legacy v9, are changes possible to the 
>Legacy Home tab in the software to accommodate (easy access, replace contents, 
>etc) in the software for access to social sites?

 

Thanks,

 

Denise

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10? and Clipboard question

[Elizabeth Lindsay]

I have Windows 10 and find this problem occurs intermittently with a number of 
programs/apps including Outlook, so for me it is not just a Legacy problem.

 

To the lady who talked about using M8 Free Clipboard: would you mind explaining 
in more detail how you use the program for sourcing. I thought my system was 
working well, but now realize that I could do a lot better if I tried the 
clipboard. 

 

Thanks,

Elizabeth

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Brian Lightfoot
Sent: Wednesday, 28 September 2016 12:56 AM
To: 'Legacy User Group' 
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

I recall that annoyance with resizing the Legacy window as having been around 
since at least Legacy version 7. I typically use a split screen mode with 
Legacy taking up ½ and a browser window on the other half. But whenever I have 
to resize the Legacy window, it takes several mouse attempts with it just 
springing back to its original size. In other words, the resizing attempt does 
not stick until the 3rd or 4th attempt. Certainly not life threatening but 
merely annoying. Legacy is the only application that exhibits this behavior. It 
has nothing to do with Windows 10.

 

 

Brian in CA

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Richard Van Wasshnova
Sent: Tuesday, September 27, 2016 7:38 AM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

I've noticed when resizing Legacy with the mouse on the edge if I hold the 
mouse button down after I stop sliding up or down it jumps back to the original 
size. I have to release the button as soon as I stop sliding the mouse.

 

I just checked my laptop and it resizes OK. I can resize and hold the button 
and it stays there. Both are Win 10.

 

The desktop computer resizes other programs fine, Only Legacy exhibits this 
problem.

 

 

On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin mailto:sarrazingeor...@gmail.com> > wrote:

Under Windows 10, when ones tries to go to a smaller window, the process is not 
fluid as it is with other programs.

There is a time delay and the passage from one level to the other goes by step.

It is the same thing with both v8 and v9.

 

There seems to be a sort of incompatibility between Windows 10 and Legacy.

 

Am I the only one to see this problem?

 

Georges 


--

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Brian Lightfoot]

I recall that annoyance with resizing the Legacy window as having been around 
since at least Legacy version 7. I typically use a split screen mode with 
Legacy taking up ½ and a browser window on the other half. But whenever I have 
to resize the Legacy window, it takes several mouse attempts with it just 
springing back to its original size. In other words, the resizing attempt does 
not stick until the 3rd or 4th attempt. Certainly not life threatening but 
merely annoying. Legacy is the only application that exhibits this behavior. It 
has nothing to do with Windows 10.

 

 

Brian in CA

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Richard Van Wasshnova
Sent: Tuesday, September 27, 2016 7:38 AM
To: Legacy User Group
Subject: Re: [LegacyUG] Incompatibility with Windows 10?

 

I've noticed when resizing Legacy with the mouse on the edge if I hold the 
mouse button down after I stop sliding up or down it jumps back to the original 
size. I have to release the button as soon as I stop sliding the mouse.

 

I just checked my laptop and it resizes OK. I can resize and hold the button 
and it stays there. Both are Win 10.

 

The desktop computer resizes other programs fine, Only Legacy exhibits this 
problem.

 

 

On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin  
wrote:

Under Windows 10, when ones tries to go to a smaller window, the process is not 
fluid as it is with other programs.

There is a time delay and the passage from one level to the other goes by step.

It is the same thing with both v8 and v9.

 

There seems to be a sort of incompatibility between Windows 10 and Legacy.

 

Am I the only one to see this problem?

 

Georges 


--

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Leon Chapman]

I see the same thing on several Windows 10 machines.
Chap

___
Leon Chapman
chap...@gmail.com
-

On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin  wrote:

> Under Windows 10, when ones tries to go to a smaller window, the process
> is not fluid as it is with other programs.
>
> There is a time delay and the passage from one level to the other goes by
> step.
>
> It is the same thing with both v8 and v9.
>
>
>
> There seems to be a sort of incompatibility between Windows 10 and Legacy.
>
>
>
> Am I the only one to see this problem?
>
>
>
> Georges
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Changing Master Sources

[MVMcgrs--- via LegacyUserGroup]

The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try.--- Begin Message ---
Hi  Cathy,
 
You are  absolutely right. Legacy has always had the ability to cite and 
attach sources  AND print them out with a FGS. I was talking about 
SourceWriter. Having started  with Roots 3, I had to find another program when 
Howard 
stopped supporting  Visual Roots (Palladium purchased it in 1997) so it was 
later that I started  with Legacy. Tried FTM but it had a really high 
learning curve (for me). So  Legacy would have been the 1st or 2nd version.
 
With Howard's programs you could source as a  separate entry, day; month; 
year as well as city; county; state if all  found in separate documents. I 
asked Geoff for years to add that feature to  Leagacy, now I just add that to 
the detail field.
 
I save my  sources by person mentioned so if I have a 1900 census it's said 
under given  name first name - 1900. So if I make a mistake or leave out a 
portion of the  citation, ie line numbers, I just make the correction in 
that one source and it  actually changes it in all the sources with that name. 
It doesn't happen if you  are using the detail screen, that has to be 
changed individually. 
 
I use the  detail screen for something that would only apply to that 
individual, ie  SSN.
 
Marie

Marie Varrelman Melchiori, Certified Genealogist  Emeritus
__
CG  or Certified Genealogist is a service mark of the Board for 
Certification of  Genealogists, used under license by Board-certified 
genealogists 
after periodic  competency evaluation, and the board name is registered in the 
US Patent &  Trademark Office.




In a message dated 9/26/2016 11:29:10 P.M. Eastern Daylight Time,  
genea...@gmail.com writes:

Marie,

Legacy has always had citations. I started using  Legacy in 1998 with 
Legacy 2. It's one of the reasons I chose Legacy  because it had better 
sourcing than Brothers Keeper that I was using at  the time.

I think you mean before the SourceWriter and that you've  stayed with 
Basic Style Sources.

You still have the same problem if  you've used the wrong Master Source.
Perhaps you mean you only have one  Master Source and everything is in 
Source Details.

Cathy
>  MVMcgrs--- via LegacyUserGroup  
Marie said:
I started  with Legacy long before they had citations so I made my own 
and saved them  as templates. I just add the details, save it as a 
separate citation and  still have the template to use again. The 
"template" stays right in the  list of citations.
Marie
> Tuesday, 27 September 2016 11:06  AM
> The original message to the list is in the  attachment.
>
> This action is required because of the DMARC  Reject/Quarantine Policy
> imposed by some email providers. Users who  want to send messages
> without conversion to attachments should use a  different email address
> for their subscription.
>
> Known  providers for free email accounts whose emails do not require
> this  conversion include gmail.com and hotmail.com. Many other email
>  providers will also work but you will have to give them a try.


--  

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To  manage your subscription and unsubscribe  
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives  at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

--- End Message ---
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Incompatibility with Windows 10?

[Richard Van Wasshnova]

I've noticed when resizing Legacy with the mouse on the edge if I hold the
mouse button down after I stop sliding up or down it jumps back to the
original size. I have to release the button as soon as I stop sliding the
mouse.

I just checked my laptop and it resizes OK. I can resize and hold the
button and it stays there. Both are Win 10.

The desktop computer resizes other programs fine, Only Legacy exhibits this
problem.


On Tue, Sep 27, 2016 at 3:06 AM, Georges Sarrazin  wrote:

> Under Windows 10, when ones tries to go to a smaller window, the process
> is not fluid as it is with other programs.
>
> There is a time delay and the passage from one level to the other goes by
> step.
>
> It is the same thing with both v8 and v9.
>
>
>
> There seems to be a sort of incompatibility between Windows 10 and Legacy.
>
>
>
> Am I the only one to see this problem?
>
>
>
> Georges
>
> --
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Sherry]

Stick around here! The more who stick around here gives this list a better
chance of survival!

I'm not a big FB fan either - I've tried but it just isn't my cup of tea.

Sherry

On Tue, Sep 27, 2016 at 6:00 AM, Kathy & Ed.  wrote:

> I have no use for Facebook and won't be any part of it.  If we have to use
> it, I'll just leave the group and go back to doing everything on my own.
>
> *From:* Bill Hoff 
> *Sent:* Tuesday, September 27, 2016 6:12 AM
> *To:* Legacy User Group 
> *Subject:* Re: [LegacyUG] Legacy User Group Mail List vs Facebook User
> Group
>
> Never gonna join Face Book. Been there, done that and not going back
>
> Sent from my iPhone
>
> On Sep 27, 2016, at 12:21 AM, CE WOOD  wrote:
>
> Ditto. Although our opinions probably will change nothing because Legacy
> wants more buyers, and Facebook has more visibility. A shame for we loyals
> who want answers.
>
> CE
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy v9

[Cathy Pinner]

Gene,

I'm a beta tester.
We haven't had a vote either.
There are hundreds of suggestions logged.
The programmers implement the ones they like.
They're more likely to consider ones that lots of people have asked for 
but that's no guarantee they'll implement it.


Cathy

Gene Rampale wrote:


Hello Cathy,
Have you thought of posting the suggestions and letting the end users
poll on the favorite two or three?

Thanks!

Gene

On Tue, Sep 27, 2016 at 5:30 AM, Cathy Pinner mailto:genea...@gmail.com>> wrote:

Ian,

No users can't see the suggestion list.

It doesn't matter if you send in a suggestion that is already
there. A note is often added to say person x has asked for it.

As a newish user you may find that what you want is already there.
Someone will respond with that information if you send in a
suggestion.

Cathy


Ian Thomas wrote:



Jenny - Yes, I did see that link but is there a (viewable)
collation of
those suggestions?

Ian Thomas
Albert Park, Victoria 3206 Australia

-Original Message-
From: LegacyUserGroup
[mailto:legacyusergroup-boun...@legacyusers.com
] On
Behalf Of Jenny M Benson
Sent: Tuesday, 27 September 2016 7:15 PM
To: Legacy User Groupmailto:legacyusergroup@legacyusers.com>>
Subject: Re: [LegacyUG] Legacy v9

On 27-Sep-16 09:43 AM, Ia n Thomas wrote:



I'm new to Legacy FT software - and I can't find much fault with it.
(I have v8.0, Deluxe)

But I've heard a v9 mentioned.

Often, when new software versions are mooted, the producer (rather
than
programmers) asks for a "wish list"; and some indication of the
most-favoured / desirable features results - either from the
company,
or via the user-groups.

I'm so new to these fora (this email list, the Legacy Facebook page)
that I haven't seen anything like a wish-list.





If you open the Legacy Home tab in the Legacy program and look on the
right-hand side under Support, you will see "Make a suggestion."
Use that
for any changes/enhancements you'd like to see.




-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Kathy & Ed.]

I have no use for Facebook and won't be any part of it.  If we have to use it, 
I'll just leave the group and go back to doing everything on my own.


From: Bill Hoff 
Sent: Tuesday, September 27, 2016 6:12 AM
To: Legacy User Group 
Subject: Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group


Never gonna join Face Book. Been there, done that and not going back

Sent from my iPhone

On Sep 27, 2016, at 12:21 AM, CE WOOD  wrote:


  Ditto. Although our opinions probably will change nothing because Legacy 
wants more buyers, and Facebook has more visibility. A shame for we loyals who 
want answers.







  CE  




--

  From: LegacyUserGroup  on behalf of 
Marianne Nolan 
  Sent: Monday, September 26, 2016 9:04 PM
  To: Legacy User Group
  Subject: Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group 

  So do I!




  Marianne



--

  From: LegacyUserGroup  on behalf of 
sa...@attglobal.net 
  Sent: Monday, September 26, 2016 3:29:35 PM
  To: Legacy User Group
  Subject: Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group 

  FWIW, I agree with Chick.

  From: Chick Lewis 
  Sent: September 14, 2016 2:34 PM
  To: legacyusergroup@legacyusers.com 
  Subject: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

  Are the posts on this mail list the same as the ones on Facebook?

  It seems to me that having a Legacy Facebook page as well as this Legacy Mail 
List defeats the purpose of users helping each other.  Is it necessary to 
belong to both groups to get all the posts? 

  Discouraging because I don’t belong (nor want to join) Facebook or Twitter.

  Chick




--
  -- 

  LegacyUserGroup mailing list
  LegacyUserGroup@legacyusers.com
  To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
  Archives at:
  http://www.mail-archive.com/legacyusergroup@legacyusers.com/




--
  This email has been checked for viruses by Avast antivirus software. 
www.avast.com 
   


  -- 

  LegacyUserGroup mailing list
  LegacyUserGroup@legacyusers.com
  To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
  Archives at:
  http://www.mail-archive.com/legacyusergroup@legacyusers.com/






-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy v9

[Gene Rampale]

Hello Cathy,
Have you thought of posting the suggestions and letting the end users poll
on the favorite two or three?

Thanks!

Gene

On Tue, Sep 27, 2016 at 5:30 AM, Cathy Pinner  wrote:

> Ian,
>
> No users can't see the suggestion list.
>
> It doesn't matter if you send in a suggestion that is already there. A
> note is often added to say person x has asked for it.
>
> As a newish user you may find that what you want is already there. Someone
> will respond with that information if you send in a suggestion.
>
> Cathy
>
>
> Ian Thomas wrote:
>
>
> Jenny - Yes, I did see that link but is there a (viewable) collation of
> those suggestions?
>
> Ian Thomas
> Albert Park, Victoria 3206 Australia
>
> -Original Message-
> From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
> Behalf Of Jenny M Benson
> Sent: Tuesday, 27 September 2016 7:15 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Legacy v9
>
> On 27-Sep-16 09:43 AM, Ia n Thomas wrote:
>
>
> I'm new to Legacy FT software - and I can't find much fault with it.
> (I have v8.0, Deluxe)
>
> But I've heard a v9 mentioned.
>
> Often, when new software versions are mooted, the producer (rather
> than
> programmers) asks for a "wish list"; and some indication of the
> most-favoured / desirable features results - either from the company,
> or via the user-groups.
>
> I'm so new to these fora (this email list, the Legacy Facebook page)
> that I haven't seen anything like a wish-list.
>
>
>
> If you open the Legacy Home tab in the Legacy program and look on the
> right-hand side under Support, you will see "Make a suggestion."  Use that
> for any changes/enhancements you'd like to see.
>
>
>
> --
> Jenny M Benson
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy v9

[Cathy Pinner]

Ian,

No users can't see the suggestion list.

It doesn't matter if you send in a suggestion that is already there. A 
note is often added to say person x has asked for it.


As a newish user you may find that what you want is already there. 
Someone will respond with that information if you send in a suggestion.


Cathy


Ian Thomas wrote:


Jenny - Yes, I did see that link but is there a (viewable) collation of
those suggestions?

Ian Thomas
Albert Park, Victoria 3206 Australia

-Original Message-
From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
Behalf Of Jenny M Benson
Sent: Tuesday, 27 September 2016 7:15 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Legacy v9

On 27-Sep-16 09:43 AM, Ian Thomas wrote:


I'm new to Legacy FT software - and I can't find much fault with it.
(I have v8.0, Deluxe)

But I've heard a v9 mentioned.

Often, when new software versions are mooted, the producer (rather
than
programmers) asks for a "wish list"; and some indication of the
most-favoured / desirable features results - either from the company,
or via the user-groups.

I'm so new to these fora (this email list, the Legacy Facebook page)
that I haven't seen anything like a wish-list.




If you open the Legacy Home tab in the Legacy program and look on the
right-hand side under Support, you will see "Make a suggestion." Use that
for any changes/enhancements you'd like to see.



--
Jenny M Benson
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Bill Hoff]

Never gonna join Face Book. Been there, done that and not going back

Sent from my iPhone

> On Sep 27, 2016, at 12:21 AM, CE WOOD  wrote:
> 
> Ditto. Although our opinions probably will change nothing because Legacy 
> wants more buyers, and Facebook has more visibility. A shame for we loyals 
> who want answers.
> 
> 
> 
> CE 
> 
> 
>  
> From: LegacyUserGroup  on behalf of 
> Marianne Nolan 
> Sent: Monday, September 26, 2016 9:04 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group
>  
> So do I!
> 
> 
> Marianne
>  
> From: LegacyUserGroup  on behalf of 
> sa...@attglobal.net 
> Sent: Monday, September 26, 2016 3:29:35 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group
>  
> FWIW, I agree with Chick.
>  
> From: Chick Lewis
> Sent: September 14, 2016 2:34 PM
> To: legacyusergroup@legacyusers.com
> Subject: [LegacyUG] Legacy User Group Mail List vs Facebook User Group
>  
> Are the posts on this mail list the same as the ones on Facebook?
> 
> It seems to me that having a Legacy Facebook page as well as this Legacy Mail 
> List defeats the purpose of users helping each other.  Is it necessary to 
> belong to both groups to get all the posts?
> 
> Discouraging because I don’t belong (nor want to join) Facebook or Twitter.
> 
> Chick
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
> 
> 
>   
> This email has been checked for viruses by Avast antivirus software. 
> www.avast.com
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Incompatibility with Windows 10?

[Georges Sarrazin]

Under Windows 10, when ones tries to go to a smaller window, the process is not 
fluid as it is with other programs.

There is a time delay and the passage from one level to the other goes by step.

It is the same thing with both v8 and v9.

 

There seems to be a sort of incompatibility between Windows 10 and Legacy.

 

Am I the only one to see this problem?

 

Georges 

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy v9

[Ian Thomas]

Jenny - Yes, I did see that link but is there a (viewable) collation of
those suggestions? 

Ian Thomas
Albert Park, Victoria 3206 Australia

-Original Message-
From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
Behalf Of Jenny M Benson
Sent: Tuesday, 27 September 2016 7:15 PM
To: Legacy User Group 
Subject: Re: [LegacyUG] Legacy v9

On 27-Sep-16 09:43 AM, Ian Thomas wrote:
> I'm new to Legacy FT software - and I can't find much fault with it. 
> (I have v8.0, Deluxe)
>
> But I've heard a v9 mentioned.
>
> Often, when new software versions are mooted, the producer (rather 
> than
> programmers) asks for a "wish list"; and some indication of the 
> most-favoured / desirable features results - either from the company, 
> or via the user-groups.
>
> I'm so new to these fora (this email list, the Legacy Facebook page) 
> that I haven't seen anything like a wish-list.
>

If you open the Legacy Home tab in the Legacy program and look on the
right-hand side under Support, you will see "Make a suggestion."  Use that
for any changes/enhancements you'd like to see.



--
Jenny M Benson

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy v9

[Jenny M Benson]

On 27-Sep-16 09:43 AM, Ian Thomas wrote:

I’m new to Legacy FT software – and I can’t find much fault with it. (I
have v8.0, Deluxe)

But I’ve heard a v9 mentioned.

Often, when new software versions are mooted, the producer (rather than
programmers) asks for a “wish list”; and some indication of the
most-favoured / desirable features results – either from the company, or
via the user-groups.

I’m so new to these fora (this email list, the Legacy Facebook page)
that I haven’t seen anything like a wish-list.



If you open the Legacy Home tab in the Legacy program and look on the 
right-hand side under Support, you will see "Make a suggestion."  Use 
that for any changes/enhancements you'd like to see.




--
Jenny M Benson

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Changing Master Sources

[Jenny M Benson]

On 27-Sep-16 02:48 AM, Cathy Pinner wrote:


This is much easier to do if you use a Clipboard Extender like the the
ones from m8software.com  There are free versions. It means you can copy
more than one thing at a time before you paste. It also means you can
save some clips for later use. eg I save a lot of "boiler text" that I
use regularly when entering sources. eg:  birth of ,citing , Entries for


Regular readers (!) will know I am a huge fan of M8's FreeClip. In 
addition to many short pieces of boilerplate text, as Cathy mentions, I 
have stored all the British Census dates and "templates" for use when 
transcribing documents such as BMD Certificates, Church Register 
entries, Medal Cards and so on.


There was a time when I didn't bother with such transcriptions as long 
as I had attached an image of the document concerned, but Geoff showed 
in a Webinar that he did this and pointed out that the information was 
then much quicker and easier to read and that it would always be 
present, even when (for example) sending someone a gedcom where a 
picture would not be included.


Don't we all love Geoff?!

--
Jenny M Benson

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Legacy v9

[Ian Thomas]

I’m new to Legacy FT software – and I can’t find much fault with it. (I have 
v8.0, Deluxe)

But I’ve heard a v9 mentioned. 

Often, when new software versions are mooted, the producer (rather than 
programmers) asks for a “wish list”; and some indication of the most-favoured / 
desirable features results – either from the company, or via the user-groups. 

I’m so new to these fora (this email list, the Legacy Facebook page) that I 
haven’t seen anything like a wish-list.

 

Comments?

 

(I too use FB very sparingly, and I find this email list sufficient for my 
needs – but I would not waste my time arguing for / against the two arenas, or 
even expressing a preference).

 

Ian Thomas

Albert Park, Victoria 3206 Australia

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Legacy User Group Mail List vs Facebook User Group

[Mary Young]

This subject was thoroughly discussed here, only a week or two ago.

On 27 Sep 2016 06:23, "Cathy Pinner"  wrote:

> Everyone,
>
> It's your choice whether you join the Facebook group or not.
>
> The Facebook posts are not in this mailing list. There isn't a mechanism
> to re-post them here.
>
> Besides you'd start complaining that there was too much mail as the
> Facebook group is far more lively as there are a lot more users there.
>
> Your posts here aren't on the Facebook group.
>
> I repeat - it's your choice.
>
> Some people are on both this list and Facebook. Obviously some support
> staff and beta testers who give more answers are also on both though I
> usually check Facebook more often than here.
>
> Learn that you can belong to a Facebook Group without getting involved in
> friending and writing status updates on your own timeline etc etc.
>
> Learn that you can tie down your privacy settings on Facebook.
> So don't refuse Facebook options for the wrong re asons. But you don't
> have to join.
>
> Note: Likes on Facebook are far less time-wasting than "I agree" posts.
>
> Cathy
>
> Marianne Nolan wrote:
>
>
> So do I!
>
>
> Marianne
>
> 
> *From:* LegacyUserGroup  on
> behalf of sa...@attglobal.net 
> *Sent:* Monday, September 26, 2016 3:29:35 PM
> *To:* Legacy User Group
> *Subject:* Re: [LegacyUG] Legacy User Group Mail List vs Facebook User
> Group
> FWIW, I agree with Chick.
> *From:* Chick Lewis 
> *Sent:* September 14, 2016 2:34 PM
> *To:* legacyusergroup@legacyusers.com
> 
> *Subject:* [LegacyUG] Legacy User Group Mail List vs Facebook User Group
>
> Are the posts on this mail list the same as the ones on Facebook?
>
>
>
>
>
>
>
>
> * It seems to me that having a Legacy Facebook page as well as this Legacy
> Mail List defeats the purpose of users helping each other.Is it necessary
> to belong to both groups to get all the posts? Discouraging because I don’t
> belong (nor want to join) Facebook or Twitter. Chick *
>
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/