Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
I received 4 tickets in Bethesda, MD over a 30 day period for driving up to 45 mph in four different 30 mph zones. Geico threatened to cancel my auto insurance, but I pleaded (whined) directly top their VP so they reconsidered and just doubled my rates for a few years while I learned my lesson. In the District, when they catch you speeding on photo radar there are no points, no harm so long as you pay the (usually) $100 fine... On 3/24/06, Sunil Hari [EMAIL PROTECTED] wrote: Just like when I was 17, got my first ticket, and swore to my parents that I'd never get another one. Then when i was 21, I got two in 6 weeks. Same car. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 16:23:12 -0500 andrew strasfogel [EMAIL PROTECTED] wrote: Thanks for the input. He tells me it's for racing at Summit Point with the Miata Society and that he won't get any more speeding tickets. Uh ... yeah ... right. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474 ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Andrew - My son [Air Force mechanic] is a bit of a Miata nut - currently rebuilding an engine and making a transmission conversion at the same time. If you don't get the info you need from this list let me know and I will direct your questions to him BillR Jacksonville FL 1981 300SD 273k -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of andrew strasfogel Sent: Friday, March 24, 2006 3:59 PM To: Mercedes Discussion List Subject: Re: [MBZ] Was 8500 X50 Radar Detector now My Problem OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: triplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Our turbo MB's have internal engine mods such as oilers under the pistons, etc to handle the extra pressure and heat. Would think this principle would apply to other engines as well. Miata Monster (V8), now we're talking! That's one goal I have left in my auto dream wish bag. know I will never be able to afford a Cobra! On 3/24/06, Rich Thomas [EMAIL PROTECTED] wrote: I see those guys put turbos on engines on the TV shows, it's mostly a bolt-up job with a little drilling here and there for mounts and such. Does not look like any big deal if the kit is well made for the particular install. No input re: engine longevity, but I would think replacement engines/bits of various sorts would be fairly cheap even if it croaked, there's a lot of Miatas out there, and a lot of hop-up experience with them. If it blows up, there are V8 conversion kits...now that would be some fun! I hope he lets you drive it too! -R R A Bennell wrote: Put the roll bar in to save his neck. Do not put the turbo in for the same reason. Plus engine longevity, tuning problems etc. If he really needs more jamb, swap for a Mustang with an 8 or something else with more power but keep it simple and cheap to fix. My 2 cents but free advice is worth what you pay for it etc. Randy B -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Sunil Hari Sent: Friday, March 24, 2006 3:17 PM To: Mercedes Discussion List Subject: Re: [MBZ] Was 8500 X50 Radar Detector now My Problem um, yeah. what are you doing letting your kid drive a 2-seat pocket rocket? And turbocharging it only makes it more susceptible to speeding tickets and accidents. But strictly speaking from a mechanical standpoint, installing a turbo and a roll bar is very doable by you and your son (if you can maintain an old benz, you can do this), but I don't think it's a one-day project. On 3/24/06, andrew strasfogel [EMAIL PROTECTED] wrote: OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 15:15:36 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Yup, you got it. Everything has to turn as fast as the speedo cable or something will break. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474 ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- John Freer
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
On Fri, 24 Mar 2006 16:23:12 -0500 andrew strasfogel [EMAIL PROTECTED] wrote: Thanks for the input. He tells me it's for racing at Summit Point with the Miata Society and that he won't get any more speeding tickets. Uh ... yeah ... right. Craig
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Just like when I was 17, got my first ticket, and swore to my parents that I'd never get another one. Then when i was 21, I got two in 6 weeks. Same car. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 16:23:12 -0500 andrew strasfogel [EMAIL PROTECTED] wrote: Thanks for the input. He tells me it's for racing at Summit Point with the Miata Society and that he won't get any more speeding tickets. Uh ... yeah ... right. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
On Mar 24, 2006, at 3:59 PM, andrew strasfogel wrote: Any words of advice would be appreciated. I would seek the sage advice of the mother first and foremost. You're damned if you do and damned if you don't. I say help the kid out, go for it. It wouldn't hurt to suck up as much info as possible before agreeing to anything. Johnny B. I Mac Therefore I am
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
A friend's kid got 3 tickets in 3 days from the same cop in exactly the same spot. He said I dunno how it happened! His Dad and I spent an hour and put a clip on the throttle cable on the car so it wouldn't easily get beyond half throttle. That taught him a lesson... -Curt Date: Fri, 24 Mar 2006 20:01:38 -0500 From: Sunil Hari [EMAIL PROTECTED] Subject: Re: [MBZ] Was 8500 X50 Radar Detector now My Problem To: Mercedes Discussion List [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=ISO-8859-1 Just like when I was 17, got my first ticket, and swore to my parents that I'd never get another one. Then when i was 21, I got two in 6 weeks. Same car. - Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates. From [EMAIL PROTECTED] Sat Mar 25 14:28:30 2006 Received: from elasmtp-mealy.atl.sa.earthlink.net ([209.86.89.69]) by server5.arterytc5.net with esmtp (Exim 4.52) id 1FN9kk-0001GT-N0 for [EMAIL PROTECTED]; Sat, 25 Mar 2006 14:28:30 + DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=iz+bfPC5j0fLoBzFY5DGbs4tP2XH0obOOCP9u5oil3OQ859zJJBoAb/VbeRJudoH; h=Received:In-Reply-To:References:Mime-Version:X-Priority:Content-Type:Message-Id:From:Subject:Date:To:X-Mailer:X-ELNK-Trace:X-Originating-IP; Received: from [65.110.128.59] (helo=[192.168.2.74]) by elasmtp-mealy.atl.sa.earthlink.net with asmtp (Exim 4.34) id 1FN9kj-0005YP-3L for [EMAIL PROTECTED]; Sat, 25 Mar 2006 09:28:29 -0500 In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Mime-Version: 1.0 (Apple Message framework v746.3) X-Priority: 3 Message-Id: [EMAIL PROTECTED] From: John Berryman [EMAIL PROTECTED] Date: Sat, 25 Mar 2006 09:28:26 -0500 To: Mercedes Discussion List [EMAIL PROTECTED] X-Mailer: Apple Mail (2.746.3) X-ELNK-Trace: b3baf86f04a51c2f0f36c4a2948c83129ef193a6bfc3dd48f9df59ffe64c1feed6b314bded538845c6b317bf5bc479bb350badd9bab72f9c350badd9bab72f9c X-Originating-IP: 65.110.128.59 X-Antivirus-Scanner: Clean mail though you should still use an Antivirus Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.6 Subject: Re: [MBZ] 91 300D Problem at Startup X-BeenThere: [EMAIL PROTECTED] X-Mailman-Version: 2.1.6 Precedence: list Reply-To: Mercedes Discussion List [EMAIL PROTECTED] List-Id: Mercedes Discussion List mercedes_striplin.net.striplin.net List-Unsubscribe: http://striplin.net/mailman/listinfo/mercedes_striplin.net, mailto:[EMAIL PROTECTED] List-Archive: http://striplin.net/pipermail/mercedes_striplin.net List-Post: mailto:[EMAIL PROTECTED] List-Help: mailto:[EMAIL PROTECTED] List-Subscribe: http://striplin.net/mailman/listinfo/mercedes_striplin.net, mailto:[EMAIL PROTECTED] X-List-Received-Date: Sat, 25 Mar 2006 14:28:30 - On Mar 24, 2006, at 9:00 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Any suggestions?TIA If you're not losing any coolant, the white smoke must be excess fuel or incomplete combustion. Try letting the GPs stay lit until the relay cuts out twice then on the third cycle fire the engine after about 30 seconds of glowing. If there is an improvement, carbon sheathing as Marshall mentioned could be the culprit. If no improvement, there may be some injectors leaking fuel into the cylinders. Diesel Purge may help but you should do it with supply and return lines in a jar rather than pouring it in the tank as it works better full strength. Johnny B. I Mac Therefore I am
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
on Wednesday. My speedo is off by quite a bit, Like about 25%. How's the odometer? Every time I've called our local speedo shop the _first_ thing they say to check is the odometer. Does it track the mile markers? If not, you've got a gearing problem. If it tracks, then you have a calibration problem within the speedometer itself. 25% is a lot to be off via a gear. -- Jim
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Ditto what Jim said. I bet the odo is also off ~25%. Sounds to me like someoned changed the Euro kph speedo to a USA mph version, but ignored the fact that the axle ratios are different. You can't order a drive gear, the trannies all output the same signal. You have to match the speedometer with the axle ratio. So if I'm right, you'll have to figure out what axle ratio you have now, then figure out what USA model used the same axle, and get a used speedo from that car. Or, get a conversion box to go in between to adjust the 25% error. :) -dm -- Date: Fri, 24 Mar 2006 07:05:50 -0800 From: Jim Cathey [EMAIL PROTECTED] Subject: Re: [MBZ] Was 8500 X50 Radar Detector now My Problem on Wednesday. My speedo is off by quite a bit, Like about 25%. How's the odometer? Every time I've called our local speedo shop the _first_ thing they say to check is the odometer. Does it track the mile markers? If not, you've got a gearing problem. If it tracks, then you have a calibration problem within the speedometer itself. 25% is a lot to be off via a gear. -- Jim
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
On Mar 24, 2006, at 10:05 AM, Jim Cathey wrote: How's the odometer? Every time I've called our local speedo shop the _first_ thing they say to check is the odometer. Non-functional Does it track the mile markers? If not, you've got a gearing problem. This I'm aware of If it tracks, then you have a calibration problem within the speedometer itself. 25% is a lot to be off via a gear. 25% is a lot to be off expecting calibration to remedy. I need the info requested to make an educated guess. If in fact there is a difference in rotating speed of the magnet between Euro and US all the recalibration in the world would not solve the problem. I'll be replacing the odometer gear next week after pulling my IC and counting teeth as per odometergears.com's suggestion. I can however see how not turning the odometer could create less friction allowing the speedo to read high as mine does. I'm sure I'll get to the bottom of this. -- Jim Johnny B. I Mac Therefore I am
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
On Mar 24, 2006, at 10:52 AM, Dave M. wrote: Ditto what Jim said. I bet the odo is also off ~25%. Sounds to me like someoned changed the Euro kph speedo to a USA mph version, but ignored the fact that the axle ratios are different. You can't order a drive gear, the trannies all output the same signal. You have to match the speedometer with the axle ratio. So if I'm right, you'll have to figure out what axle ratio you have now, then figure out what USA model used the same axle, and get a used speedo from that car. Or, get a conversion box to go in between to adjust the 25% error. :) -dm This is not an electronic speedo it is cable driven just like all my earlier 201s BTW my Euro 190D is an 86. There has to be different gear sets available for cars equipped with different engines and transmissions due to the fact that they all use different final drive ratios. Once I know for sure that the rear-end ratios are the same or different and fix the odometer i will know what to do. Are you able to find that info on a euro spec car? Johnny B. I Mac Therefore I am
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Many times in the past i have been able to glue the gear to the shaft. I used epoxy but there are probably better adhesives available. JB Weld, gorilla glue etc. Be sure to degrease the gear and shaft first. If you can roughen up the bonding surfaces with emery cloth that is helpful also. At 09:54 AM 3/24/2006, you wrote: On Mar 24, 2006, at 10:05 AM, Jim Cathey wrote: How's the odometer? Every time I've called our local speedo shop the _first_ thing they say to check is the odometer. Non-functional Does it track the mile markers? If not, you've got a gearing problem. This I'm aware of If it tracks, then you have a calibration problem within the speedometer itself. 25% is a lot to be off via a gear. 25% is a lot to be off expecting calibration to remedy. I need the info requested to make an educated guess. If in fact there is a difference in rotating speed of the magnet between Euro and US all the recalibration in the world would not solve the problem. I'll be replacing the odometer gear next week after pulling my IC and counting teeth as per odometergears.com's suggestion. I can however see how not turning the odometer could create less friction allowing the speedo to read high as mine does. I'm sure I'll get to the bottom of this. -- Jim Johnny B. I Mac Therefore I am ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
This may be a long shot, but if you purchased this vehicle second hand it MAY have the incorrect speedometer. Yes, my son's 1985 300D was wildly inaccurate because it had a replacement 240D speedo!! On 3/24/06, Loren Faeth [EMAIL PROTECTED] wrote: Many times in the past i have been able to glue the gear to the shaft. I used epoxy but there are probably better adhesives available. JB Weld, gorilla glue etc. Be sure to degrease the gear and shaft first. If you can roughen up the bonding surfaces with emery cloth that is helpful also. At 09:54 AM 3/24/2006, you wrote: On Mar 24, 2006, at 10:05 AM, Jim Cathey wrote: How's the odometer? Every time I've called our local speedo shop the _first_ thing they say to check is the odometer. Non-functional Does it track the mile markers? If not, you've got a gearing problem. This I'm aware of If it tracks, then you have a calibration problem within the speedometer itself. 25% is a lot to be off via a gear. 25% is a lot to be off expecting calibration to remedy. I need the info requested to make an educated guess. If in fact there is a difference in rotating speed of the magnet between Euro and US all the recalibration in the world would not solve the problem. I'll be replacing the odometer gear next week after pulling my IC and counting teeth as per odometergears.com's suggestion. I can however see how not turning the odometer could create less friction allowing the speedo to read high as mine does. I'm sure I'll get to the bottom of this. -- Jim Johnny B. I Mac Therefore I am ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
On Fri, 24 Mar 2006 10:54:44 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 10:05 AM, Jim Cathey wrote: How's the odometer? Every time I've called our local speedo shop the _first_ thing they say to check is the odometer. Non-functional It would seem that the best course of action would be to get the odometer to work, even temporarily. You mentioned pulling the IC (instrument cluster, I presume, not integrated circuit). You'll have ready access to make the repair to the odometer when you do that. info requested to make an educated guess. If in fact there is a difference in rotating speed of the magnet between Euro and US all the recalibration in the world would not solve the problem. I'll be replacing the odometer gear next week after pulling my IC and counting teeth as per odometergears.com's suggestion. From what I've heard, the rotation speed should be the same for a given differential ratio. The suggestion of a different speedometer head in a different instrument cluster is something worth looking at. I can however see how not turning the odometer could create less friction allowing the speedo to read high as mine does. The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I'm sure I'll get to the bottom of this. I'm sure you will, too. Craig
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Johnny B. I Mac Therefore I am
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 15:15:36 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Yup, you got it. Everything has to turn as fast as the speedo cable or something will break. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
um, yeah. what are you doing letting your kid drive a 2-seat pocket rocket? And turbocharging it only makes it more susceptible to speeding tickets and accidents. But strictly speaking from a mechanical standpoint, installing a turbo and a roll bar is very doable by you and your son (if you can maintain an old benz, you can do this), but I don't think it's a one-day project. On 3/24/06, andrew strasfogel [EMAIL PROTECTED] wrote: OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 15:15:36 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Yup, you got it. Everything has to turn as fast as the speedo cable or something will break. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Put the roll bar in to save his neck. Do not put the turbo in for the same reason. Plus engine longevity, tuning problems etc. If he really needs more jamb, swap for a Mustang with an 8 or something else with more power but keep it simple and cheap to fix. My 2 cents but free advice is worth what you pay for it etc. Randy B -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Sunil Hari Sent: Friday, March 24, 2006 3:17 PM To: Mercedes Discussion List Subject: Re: [MBZ] Was 8500 X50 Radar Detector now My Problem um, yeah. what are you doing letting your kid drive a 2-seat pocket rocket? And turbocharging it only makes it more susceptible to speeding tickets and accidents. But strictly speaking from a mechanical standpoint, installing a turbo and a roll bar is very doable by you and your son (if you can maintain an old benz, you can do this), but I don't think it's a one-day project. On 3/24/06, andrew strasfogel [EMAIL PROTECTED] wrote: OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 15:15:36 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Yup, you got it. Everything has to turn as fast as the speedo cable or something will break. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474 ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
Thanks for the input. He tells me it's for racing at Summit Point with the Miata Society and that he won't get any more speeding tickets. On 3/24/06, Sunil Hari [EMAIL PROTECTED] wrote: um, yeah. what are you doing letting your kid drive a 2-seat pocket rocket? And turbocharging it only makes it more susceptible to speeding tickets and accidents. But strictly speaking from a mechanical standpoint, installing a turbo and a roll bar is very doable by you and your son (if you can maintain an old benz, you can do this), but I don't think it's a one-day project. On 3/24/06, andrew strasfogel [EMAIL PROTECTED] wrote: OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 15:15:36 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Yup, you got it. Everything has to turn as fast as the speedo cable or something will break. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474 ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Was 8500 X50 Radar Detector now My Problem
I see those guys put turbos on engines on the TV shows, it's mostly a bolt-up job with a little drilling here and there for mounts and such. Does not look like any big deal if the kit is well made for the particular install. No input re: engine longevity, but I would think replacement engines/bits of various sorts would be fairly cheap even if it croaked, there's a lot of Miatas out there, and a lot of hop-up experience with them. If it blows up, there are V8 conversion kits...now that would be some fun! I hope he lets you drive it too! -R R A Bennell wrote: Put the roll bar in to save his neck. Do not put the turbo in for the same reason. Plus engine longevity, tuning problems etc. If he really needs more jamb, swap for a Mustang with an 8 or something else with more power but keep it simple and cheap to fix. My 2 cents but free advice is worth what you pay for it etc. Randy B -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Sunil Hari Sent: Friday, March 24, 2006 3:17 PM To: Mercedes Discussion List Subject: Re: [MBZ] Was 8500 X50 Radar Detector now My Problem um, yeah. what are you doing letting your kid drive a 2-seat pocket rocket? And turbocharging it only makes it more susceptible to speeding tickets and accidents. But strictly speaking from a mechanical standpoint, installing a turbo and a roll bar is very doable by you and your son (if you can maintain an old benz, you can do this), but I don't think it's a one-day project. On 3/24/06, andrew strasfogel [EMAIL PROTECTED] wrote: OK let's change this topic to a discussion of turbocharging and installing a roll bar on a 2005 Miata. My son says you can purchase well-documented kits to do these mods. with ordinary tools and ordinary mechanical aptitude, and wants me to do it with him. This will presumably foster father-son bonding. My question is... has the child gone mad? Isn't this something one should trust solely to professionals who do this for a living? The work is supposed to take a day, and he would save $2k in labor charges. The work would be done in SWMBA/O's car port, so I am naturally fearful of disabling the Miata and keeping her nice 85 300CD out in the rain... to my detriment. Any words of advice would be appreciated. On 3/24/06, Craig McCluskey [EMAIL PROTECTED] wrote: On Fri, 24 Mar 2006 15:15:36 -0500 John Berryman [EMAIL PROTECTED] wrote: On Mar 24, 2006, at 3:02 PM, Craig McCluskey wrote: The speedometer and odometer are driven from the speedometer cable in parallel. One does not affect the other. (Actually, if they do, the speedometer cable will break something in the speedometer head or the cable will break.) I don't know what what made me think less friction would have an effect, the magnet can only spin as fast as the speedo cable any way. Yup, you got it. Everything has to turn as fast as the speedo cable or something will break. Craig ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Sunil Hari 1992 300D 2.5T - 286Kmi. [EMAIL PROTECTED] 513-205-7474 ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
