Re: Cannot load perl GD
On 5/23/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I recently upgraded my web server from OpenBSD 3.7 to 4.1. Everything is up running except for the perl library GD. I'm getting these errors when running a perl script to create thumb nail images from larger images. The error are: Can't load '/usr/local/libdata/perl5/site_perl/i386-openbsd/auto/GD/GD.so' for module GD: Cannot load specified object at /usr/libdata/perl5/i386-openbsd/5.8.8/DynaLoader.pm line 230. at /usr/local/lib/perl5/site_perl/ThumbNail.pm line 6 Compilation failed in require at /usr/local/lib/perl5/site_perl/ThumbNail.pm line 6. BEGIN failed--compilation aborted at /usr/local/lib/perl5/site_perl/ThumbNail.pm line 6. Compilation failed in require at ./test.pl line 4. BEGIN failed--compilation aborted at ./test.pl line 4. My installation of GD (p5-GD-2.30p1.tgz) went as follows: # setenv PKG_PATH ftp://ftp.openbsd.org/pub/OpenBSD/4.1/packages/i386/ # pkg_add p5-GD-2.30p1.tgz p5-GD-2.30p1:gd-2.0.34: complete p5-GD-2.30p1: complete I've installed patches 1 thru 5 and 7 to the 4.1 release. ThumbNail.pm is a perl module I wrote to create thumb nail images that worked with OpenBSD 3.7. Suggestions for where I look for a solution to this problem? Thanks, Joe . IIRC, you need to have (at a minimum) xbase41.tgz installed also. ~samuraichef
Re: use OpenBSD to blacklist phone calls?
make some money at it. http://killthecalls.com/ On 3/20/07, Paul Pruett [EMAIL PROTECTED] wrote: OpenBSD spamd works great for blacklisting IPs, and maybe it could be use for our blacklisting telephone calls using callerID? Even though we are on the 'do not call' registry we still get 4-10 calls a day at home, and at work its just phone spam spam spam Thinking about adding a modem that recognizes callerID to my home openbsd firewall/server to have it also monitor the phones and intercept telemarketing calls between ring 1 and 2 and if a match then give a false fax signal, message or just hangup signal. Has anyone else setup an openbsd server to hangup phone calls by callerid? I looked through /usr/ports/comms and /usr/ports/telephony I think this could be done with the port package asterisk, but it does look complex and I wondered if another package was more appropriate than a VOIP package? I did google some notes for [EMAIL PROTECTED] but I did not read that it is the same as the port ASTERISK. -TIA.
Re: BSD thin client
On 1/27/07, Ramdas [EMAIL PROTECTED] wrote: Hi Group, Is it possible to convert a old intel ( BSD based ) machine with less ram hdd into a thin client. I want to install minimum BSD on the machine and convert it to a thin client. The idea is to have a secure robust terminals which can have a minimum BSD and a GUI interface for users. This thin client should talk to a central server over ethernet or a dial up modem connection . Sorry in case this is discussed earlier. Regards Ram Yes, I've done it successfully to enable end-users to connect to a virtual desktop using OpenBSD 4.0, fluxbox and idesk (for desktop icons). I keep the systems updated with rdist. The whole system fits onto a 512MB flash card. it boots right up to a desktop with icons for each user, they just have to select their icon to get their virtual desktop. It runs fine in under 128MB of RAM. running top reports: load averages: 0.15, 0.10, 0.09 10:11:00 21 processes: 1 running, 19 idle, 1 on processor CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.8% interrupt, 99.2% idle Memory: Real: 26M/83M act/tot Free: 161M Swap: 0K/512M used/tot I'm thinking of adding snort onto these for a distributed NIDS, or adding wireless cards to extend my wireless network, but those are both low priorities. ~samuraichef
Re: BSD thin client
On 1/27/07, Samurai Chef [EMAIL PROTECTED] wrote: On 1/27/07, Ramdas [EMAIL PROTECTED] wrote: Hi Group, Is it possible to convert a old intel ( BSD based ) machine with less ram hdd into a thin client. I want to install minimum BSD on the machine and convert it to a thin client. The idea is to have a secure robust terminals which can have a minimum BSD and a GUI interface for users. This thin client should talk to a central server over ethernet or a dial up modem connection . Sorry in case this is discussed earlier. Regards Ram Yes, I've done it successfully to enable end-users to connect to a virtual desktop using OpenBSD 4.0, fluxbox and idesk (for desktop icons). I keep the systems updated with rdist. The whole system fits onto a 512MB flash card. it boots right up to a desktop with icons for each user, they just have to select their icon to get their virtual desktop. It runs fine in under 128MB of RAM. running top reports: load averages: 0.15, 0.10, 0.09 10:11:00 21 processes: 1 running, 19 idle, 1 on processor CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.8% interrupt, 99.2% idle Memory: Real: 26M/83M act/tot Free: 161M Swap: 0K/512M used/tot I'm thinking of adding snort onto these for a distributed NIDS, or adding wireless cards to extend my wireless network, but those are both low priorities. ~samuraichef Oops. forgot to add, I'm using rdesktop for the desktop connections.
Re: Merchandise idea: OpenBSD mug
On 1/14/07, Constantine A. Murenin [EMAIL PROTECTED] wrote: Read the archives. Theo explained here the copyright law many times, specifically to your situation about the use of artwork -- unless you are explicitly given the right to sell you don't have such a right [1]. Period, this is misc@ and not legal@, so this is not even worth any further discussion here. Therefore, unless he specifically gives you an OK to sell, you can expect to have legal problems. :) [1] http://archives.neohapsis.com/archives/openbsd/2005-03/2490.html Thanks for the information. I failed to search the archives for this. I will wait on anything until after I have an opportunity to discuss this with Theo. To everyone else interesting in this project - it's going to be at least 6 weeks, and then maybe never after reading the thread referenced above.
Re: Merchandise idea: OpenBSD mug
Because I have a risk involved. I am placing my own money up and spending my time to fill a market request. Therefore I will keep some of the money to cover my costs and have a little profit to provide more products in the future. Some of the money will go back to the project. I could be a real bastard and not donate any money back, but I feel that would be wrong. IMHO, profiting from the excellent work that has been done on the project and not returning anything is selfish. I am not a programmer and really don't have the inclination to become one. This is my way of providing something back to the OpenBSD community. I hope that explains my position. On 1/14/07, Deanna Phillips [EMAIL PROTECTED] wrote: Samurai Chef writes: portions of the sales will be donated back to the project. Huh. What portions? Why not all proceeds? Just curious.
Re: Merchandise idea: OpenBSD mug
You are correct on the money aspect, see my other post. I have asked for permission from Theo out of courtesy. I have not received a reply yet. Once I have that permission and higher quality artwork I will place the orders. After that, it will take about 10 days to get the products. Then I will announce them and make them available. On 1/14/07, bofh [EMAIL PROTECTED] wrote: On 1/14/07, Deanna Phillips [EMAIL PROTECTED] wrote: Samurai Chef writes: portions of the sales will be donated back to the project. Huh. What portions? Why not all proceeds? Just curious. Probably some upfront costs, and you need some capital for the next batch, etc. Also need some $$ to cover for broken ones, people who didn't follow through on their orders, etc. It is a pain to deal with brokenware, which, I think is one of the reasons Theo doesn't want to do it. Before anything gets done, if I were doing it, I'll probably want 2 things, permission from the artist of the wireframe puffy, and if the word OpenBSD appears anywhere, permission from Theo, just to be nice, if nothing else.
Re: Merchandise idea: OpenBSD mug
You are free to do the same thing and donate all profits to whomever you wish. If you don't agree, then don't buy. I've stated my position and if you don't agree, then you don't agree. I have no intentions on engaging you on a long discussion of the merits of this project. On 1/14/07, Deanna Phillips [EMAIL PROTECTED] wrote: Samurai Chef writes: Because I have a risk involved. I am placing my own money up and spending my time to fill a market request. Therefore I ^ Aha, that's where I thought this was going. So your time spent marketing a brand created by unpaid volunteers is worth money. will keep some of the money to cover my costs and have a little profit
Re: Merchandise idea: OpenBSD mug
On 1/14/07, Marc Balmer [EMAIL PROTECTED] wrote: Did he get the permissions? Does he have an OK from the copyright owner to market these mugs using a copyrighted artwork? Not yet. I'm working on it however. My understanding is that Theo is the copyright holder. I have an sent an email to Theo for this use. From what I have been told, Theo is hiking for the next 5 weeks.
Re: Merchandise idea: OpenBSD mug
On 1/14/07, Marc Balmer [EMAIL PROTECTED] wrote: How about thinking if he is allowed to use the (copyrighted) artwork for commercial use? Did he get the permissions? Does he have an OK from the copyright owner to market these mugs using a copyrighted artwork? To quote from http://www.openbsd.org/art4.html: Most images provided here are copyright by OpenBSD, by Theo de Raadt, or by other members or developers of the OpenBSD group. However, it is our intent that anyone be able to use these images to represent OpenBSD in a positive light. So enjoy them and let the world see them, if that is your wish. I believe that means I am free to make and sell the cups and glasses. anyone disagree with my interpertation of that statement?
Re: Merchandise idea: OpenBSD mug
I'll do it. I'll order some and announce here. I'll set up a ebay store for the merchandise. contact me with requests.
Re: [laptop died] best notebook suitable for OpenBSD
This was covered recently, search the archives. But for the record, I think the end result was ThinkPads. On 12/4/06, Anton Karpov [EMAIL PROTECTED] wrote: My lovely Sony VAIO died few days ago. So I'm searching for a replacement. Honestly, VAIO never works good with BSDs, the only one BSD which works quite good is FreeBSD (although it has no proper suspend/resume support for VAIO). OpenBSD has several problems like unability to ajust brightness (no hardware brightness control in VAIOs), although setbrightness from linux works well under emulation, and problems with sound driver. But anyway, I loved my VAIO. Now I'm looking for replacement. I prefer small sub-laptops, with 11' screen (or even smaller). New VAIO TX series has perfect dimensions, but I decide not to mess with VAIOs anymore ;) AFAIR the best laptops for BSDs, proven/recommended by many users, are IBM/Lenovo ThinkPads. I especially prefer X series with 12' screen. So I just want to be sure it's the best choice for using OpenBSD onto it. Hey, happy mobile OpenBSD users, I want to hear your voice. Does everything in your laptop works smoothly in OpenBSD? Thanks in advance for your replays. P.S.: Okay, I know we have laptop page. But it's a little bit outdated.
Re: Which tools the OpenBSD developers are using?
wouldn't the primary tool they all use be the greymatter in their skulls?
Re: Slogan for OpenBSD goodies
On 10/6/06, Jason Mao [EMAIL PROTECTED] wrote: Hi, Bruno I think that depends on your definiton for the word free. Best rgds, Jason On 10/6/06, Bruno Carnazzi [EMAIL PROTECTED] wrote: Hi misc, I was thinking to a slogan that could be printed on some openbsd goodies : Free software can't exist without Free hardware. I think this is really the core of the current free software problem. Best regards, Bruno. s/Free/Open/g
Re: Why ksh?
like the clear command? On 7/21/06, Pedro Timsteo [EMAIL PROTECTED] wrote: Speaking of ksh, is there any way to configure it to clear the screen with CTRL+L, as bash does? Thanks.
Re: one drive in a raid 0 failed, can I save any data?
There are ways. You could drop about $80 on R-STUDIO and try to recover the data. It can regenerate raid sets. and it will read OpenBSD FFS. see http://www.data-recovery-software.net/ I've used it. It works. On 6/1/06, John Brahy [EMAIL PROTECTED] wrote: For a couple weeks I was running without backups and one of the drives died. Is there a way to recover any of the data from the drives?
Re: Laptop recommendations
On 5/11/06, Roger Neth Jr [EMAIL PROTECTED] wrote: On 5/11/06, Bryan Irvine [EMAIL PROTECTED] wrote: snip I had checked the archives for misc@, and what I had read indicated that the Macbook Pro could boot OpenBSD using Parallels virtualization software, but not natively due to hang while probing USB. Also, I'm under the opinion that the wireless doesn't work as they use broadcom adapters under the Airport Express name. I could be wrong though. I was just wondering if that had improved any. snip The Broadcom thing still applies. No drivers for airport. --Bryan Hello List, I was looking on Ebay for OpenBSD type of stuff and came across this. Doesn't this hurt the project? : ( Or are they just generous? http://cgi.ebay.com/OpenBSD-3-9-3-CD-Full-Set_W0QQitemZ7235743360QQcategoryZ4619QQssPageNameZWD1VQQrdZ1QQcmdZViewItem rogern John 3:16 I contacted the seller and asked Is this the full CD set with stickers, or copies of the CD's? This is the response I got: These cds are copies of the official 3 cd set. All cds are verified by test installations of the product. The official 3 CD set is available from www.openbsd.org for $45+$4 shipping and handling. To answer the question, Does this hurt the project? I respond, it doesn't help. eBay has strict policies about the illegal selling of copywrite protected items, and this qualifies. just go to the auction, and at the bottom is a link that reads Report this Item. It infringes on the copyright of Theo de Raadt. IIRC, three strikes and you're out on ebay. Jim
Re: bsd.mp in VMWare ESX
Use the LSI Logic SCSI controller. That should help with getting it installed.
On 5/4/06, Murali Raju [EMAIL PROTECTED] wrote:
Still no Virtual SMP support for *BSD on ESX. Are running 2.5.3? I
can't seem to even get a normal OpenBSD install on ESX.
Cheers..
_Raju
On 5/4/06, Craig Barraclough [EMAIL PROTECTED] wrote:
Just thought I'd check it out again, to see if it MP under VMware now works,
unfortunately no.
dmesg below is from bsd, not bsd.mp unfortunately.
(Following is hand copied, 'cause I still haven't worked out how to serial
console a vmware machine).
cpu1 failed to become ready
Stopped at Debugger+0x4: leave
ddb{0} ps
PID PPID PGRP UID SFLAGS WAIT
COMMAND
9 0 0 0 2 0x100204
crypto
8 0 0 0 2 0x100204
aiodoned
7 0 0 0 2 0x100204
update
6 0 0 0 2 0x100204
cleaner
5 0 0 0 2 0x100204
reaper
4 0 0 0 2 0x100204
pagedaemon
3 0 0 0 20x2100604
pfpurge
2 0 0 0 30x2100204 kmalloc
kmthread
1 0 0 0 30x204 initexec
swapper
*0 -1 0 0 70x2080204
swapper
ddb{0} trace
Debugger(d069b999, d0a98c14, 2c0, 0) at Debugger+0x4
cpu_boot_secondary(d0a98c00, 11, d05fcc12, d0828f70) at
cpu_boot_secondary+0x99
cpu_boot_secondary_processors(4458a4a7, 0, 0, d05fcc12, 0) at
cpu_boot_secondary_processors+0x41
main(0, 0, 0, 0, 0) at main+0x70c
ddb{0} show registers
ds 0x10
es 0x10
fs 0x58
gs 0
edi 0x831000
esi 0xd0a98c00end+0x2f18b0
ebp 0xd0828f18end+0x81bc8
ebx0
edx0
ecx 0xd06bbb84kprintf_mutex
eax 0x1c
eip 0xd0448de0Debugger+0x4
cs 0x8
eflags 0x246
esp 0xd0828f18end+0x81bc8
ss0xd0820010end+0x78cc0
Debugger+0x4: leave
ddb{0} boot dump
---
OpenBSD 3.9-current (GENERIC) #1: Wed May 3 13:58:50 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II Xeon (GenuineIntel 686-class, 1024KB L2 cache) 450
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 66613248 (65052K)
avail mem = 53035008 (51792K)
using 838 buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2c) BIOS, date 04/21/04, BIOS32 rev. 0 @ 0xfd880
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371FB ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0x8000 0xc8000/0x1a00! 0xca000/0x1000
0xdc000/0x4000! 0xe4000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x01
ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x01
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x08
pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: NECVMWar, VMware IDE CDR00, 1.00 SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x08: SMBus
disabled
vga1 at pci0 dev 15 function 0 VMware Virtual SVGA II rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
mpt0 at pci0 dev 16 function 0 Symbios Logic 53c1030 rev 0x01: irq 9
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: VMware, Virtual disk, 1.0 SCSI2 0/direct fixed
sd0: 4096MB, 4096 cyl, 64 head, 32 sec, 512 bytes/sec, 8388608 sec total
sd1 at scsibus1 targ 1 lun 0: VMware, Virtual disk, 1.0 SCSI2 0/direct fixed
sd1: 8192MB, 8192 cyl, 64 head, 32 sec, 512 bytes/sec, 16777216 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
pcn0 at pci0 dev 17 function 0 AMD 79c970 PCnet-PCI rev 0x10, Am79c970A,
rev 0:
Re: bsd.mp in VMWare ESX
I haven't tried to get bsd.mp working under ESX yet. Don't need to
load my servers like that I guess. I'll try to look into it a little.
On 5/4/06, Murali Raju [EMAIL PROTECTED] wrote:
On 5/4/06, Samurai Chef [EMAIL PROTECTED] wrote:
Use the LSI Logic SCSI controller. That should help with getting it
installed.
That worked! Thank you :-)
On 5/4/06, Murali Raju [EMAIL PROTECTED] wrote:
Still no Virtual SMP support for *BSD on ESX. Are running 2.5.3? I
can't seem to even get a normal OpenBSD install on ESX.
Cheers..
_Raju
On 5/4/06, Craig Barraclough [EMAIL PROTECTED] wrote:
Just thought I'd check it out again, to see if it MP under VMware now
works, unfortunately no.
dmesg below is from bsd, not bsd.mp unfortunately.
(Following is hand copied, 'cause I still haven't worked out how to
serial console a vmware machine).
cpu1 failed to become ready
Stopped at Debugger+0x4: leave
ddb{0} ps
PID PPID PGRP UID SFLAGS WAIT
COMMAND
9 0 0 0 2 0x100204
crypto
8 0 0 0 2 0x100204
aiodoned
7 0 0 0 2 0x100204
update
6 0 0 0 2 0x100204
cleaner
5 0 0 0 2 0x100204
reaper
4 0 0 0 2 0x100204
pagedaemon
3 0 0 0 20x2100604
pfpurge
2 0 0 0 30x2100204 kmalloc
kmthread
1 0 0 0 30x204 initexec
swapper
*0 -1 0 0 70x2080204
swapper
ddb{0} trace
Debugger(d069b999, d0a98c14, 2c0, 0) at Debugger+0x4
cpu_boot_secondary(d0a98c00, 11, d05fcc12, d0828f70) at
cpu_boot_secondary+0x99
cpu_boot_secondary_processors(4458a4a7, 0, 0, d05fcc12, 0) at
cpu_boot_secondary_processors+0x41
main(0, 0, 0, 0, 0) at main+0x70c
ddb{0} show registers
ds 0x10
es 0x10
fs 0x58
gs 0
edi 0x831000
esi 0xd0a98c00end+0x2f18b0
ebp 0xd0828f18end+0x81bc8
ebx0
edx0
ecx 0xd06bbb84kprintf_mutex
eax 0x1c
eip 0xd0448de0Debugger+0x4
cs 0x8
eflags 0x246
esp 0xd0828f18end+0x81bc8
ss0xd0820010end+0x78cc0
Debugger+0x4: leave
ddb{0} boot dump
---
OpenBSD 3.9-current (GENERIC) #1: Wed May 3 13:58:50 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II Xeon (GenuineIntel 686-class, 1024KB L2 cache)
450 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 66613248 (65052K)
avail mem = 53035008 (51792K)
using 838 buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2c) BIOS, date 04/21/04, BIOS32 rev. 0 @
0xfd880
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371FB ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0x8000 0xc8000/0x1a00! 0xca000/0x1000
0xdc000/0x4000! 0xe4000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x01
ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x01
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x08
pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: NECVMWar, VMware IDE CDR00, 1.00 SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
piixpm0 at pci0 dev 7 function 3 Intel 82371AB Power rev 0x08: SMBus
disabled
vga1 at pci0 dev 15 function 0 VMware Virtual SVGA II rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
mpt0 at pci0 dev 16 function 0 Symbios Logic 53c1030 rev 0x01: irq 9
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: VMware, Virtual disk, 1.0 SCSI2 0/direct
fixed
sd0: 4096MB
Re: using torrents for packages?
On 5/1/06, Greg Thomas [EMAIL PROTECTED] wrote: On 5/1/06, Darrin Chandler [EMAIL PROTECTED] wrote: On Mon, May 01, 2006 at 10:42:32PM +, Christian Weisgerber wrote: Darrin Chandler [EMAIL PROTECTED] wrote: If people are so hot for torrents, then why hasn't someone made one? But Andrew Fresh has. http://openbsd.somedomain.net/ Oh, yeah. Right you are. Then why are we having this discussion? You only need one tracker. Everyone remember to be good netizens and leave your client active to keep it seeded! We're here because Sebastian appears to want the OpenBSD team to provide an official tracker for official package distribution. Or maybe he didn't see that Andrew Fresh is working on packages for 3.9. Or maybe he just likes to whine about slow FTP and slow compression utilities. Greg Or maybe he can't scrape up $50 for the CDs.
Re: Small office with BSD blueprint
I would be interested in the details on that also. Thanks in advance. On 3/20/06, John R. Shannon [EMAIL PROTECTED] wrote: Will H. Backman wrote: Looking for feedback on a basic blueprint for a small office using BSD. Situation: Small office with maybe five workstations. Question: What would an all BSD setup look like? Solution that comes to mind: * Single server for DNS, DHCP, LPD, SMTP, IMAP, and home directories. * Full install with whatever desktop environment is chosen. * automount home directories. * Instead of NIS, maybe cron job to rsyc files like /etc/passwd, /etc/hosts, /etc/printcap from central server. Does anyone out there have a similar setup? -- Will Backman - Network Administrator Coastal Enterprises, Inc. http://www.ceimaine.org I have that. I suppose I can send details on what I've setup if you want. Let me make some comments relative to your solution: 1. You want more that one server for availability. If your single server goes down, all 5 employees will be non-productive. 2. I don't see a firewall. 3. I don't see a backup solution. This is critical. 4. You might consider a network printer rather than sharing one through your server. -- John R. Shannon, CISSP [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
Re: Pre-orders?
Funny. I was just about to post the same question. I need to replace my 3.8 cd (sold the original with a firewall config I build) and was hoping to order both at the same time. On 3/6/06, Roland Dominguez [EMAIL PROTECTED] wrote: Just wondering when we can start pre-ordering 3.9. thanks roland
Re: pix firewall question
At the risk of sounding like I'm a regular on this list, RTFM. OR look at other examples in the PIX config. On 2/18/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi there. I am a long time user of openbsd and ipf/pf. I just got stuck with the task of managing some pix firewalls for the next eight weeks until they can get someone else. Could somebody reply to me off list? I just need to do some simple redirects. Simple in openbsd, that is, but I can't figure out how to do it on the pix. --ja --
Re: Bug bounty for pciide/atapiscsi
On 11/9/05, Mark Rottler [EMAIL PROTECTED] wrote: On 11/8/05, Stephen Nelson [EMAIL PROTECTED] wrote: My company is doing some work for a client that requires a CD Bootable OpenBSD firewall. We have a couple of IBM xSeries 336 servers for this purpose. We currently cannot complete this because OpenBSD cannot mount the CDROMs on these machines (We have tried 3.7, 3.8, and current of the amd64 and i386 varieties - both GENERIC and GENERIC.MPhttp://GENERIC.MP ). [Snip] root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 arp: attempt to overwrite entry for 0.0.0.0 http://0.0.0.0 on lo0 by 00:14:5e:30:56:04 on bge0 cd0(pciide0:0:0): timeout type: atapi c_bcount: 0 c_skip: 0 cd0(pciide0:0:0): timeout type: atapi c_bcount: 32 c_skip: 0 pciide0:0:0: device timeout, c_bcount=32, c_skip=0, status=0x58DRDY,DSC,DRQ, ireason=0x2 I've had this problem pop up on a Shuttle box before I solved it by booting into kernel configuration mode (boot -c) and then disabling pciide (disable pciide*) before continuing the boot process. I don't know if this will help in your case, but it might be worth a quick try. Mark. I have a similar problem on a new AOpen XCCube with an AMD Sempron (see dmesg). I tried the disabling the pciide as described above. That didn't work, it actually caused the system to panic. I have included the steps i took (it was in the dmesg output). The trace and ps are here also. I don't really need the cd-rom on this system, but hopefully this helps to fix the problem. SamuraiChef UKC disable pciide* 59 pciide* disabled UKC quit Continuing... mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Sempron(tm) Processor 2600+, 1600.25 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 128KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 vendor SIS, unknown product 0x0761 rev 0x01 ppb0 at pci0 dev 1 function 0 SIS 86C202 VGA rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 SIS 6330 VGA rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) SIS 965 PCI rev 0x48 at pci0 dev 2 function 0 not configured SIS 5513 EIDE rev 0x01 at pci0 dev 2 function 5 not configured auich0 at pci0 dev 2 function 7 SIS 7012 AC97 rev 0xa0: irq 3, SiS7012 AC97 ac97: codec id 0x414c4760 (Avance Logic ALC655) audio0 at auich0 ohci0 at pci0 dev 3 function 0 SIS 5597/5598 USB rev 0x0f: irq 5, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: SIS OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 3 function 1 SIS 5597/5598 USB rev 0x0f: irq 10, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: SIS OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 3 function 2 SIS 5597/5598 USB rev 0x0f: irq 11, version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: SIS OHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 3 function 3 SIS 7002 USB rev 0x00: irq 9 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: SIS EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered SIS 182 SATA rev 0x01 at pci0 dev 5 function 0 not configured ppb1 at pci0 dev 6 function 0 vendor SIS, unknown product 0x000a rev 0x00 pci2 at ppb1 bus 2 ppb2 at pci0 dev 7 function 0 vendor SIS, unknown product 0x000a rev 0x00 pci3 at ppb2 bus 3 VIA VT6306 FireWire rev 0x46 at pci0 dev 8 function 0 not configured re0 at pci0 dev 11 function 0 Realtek 8169 rev 0x10: irq 10, address 00:01:80:60:ea:ed rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 fxp0 at pci0 dev 13 function 0 Intel 82557 rev 0x0c, i82550: irq 5, address 00:02:b3:a7:e9:70 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 pchb1 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00 pchb2 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00 pchb3 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00 pchb4 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00 ppb3 at pci0 dev 31 function 0 vendor SIS, unknown product 0x0004 rev 0x00 pci4 at ppb3 bus 4 isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83697HF root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 panic: cannot open
Re: know any neat tricks for 2 * dhclient?
On 10/26/05, Graham Toal [EMAIL PROTECTED] wrote: I wanted to set up a system which has two ether cards (it's part of a transparent bridge so it'll be inline with someone's connection) such that it'll pick up a DHCP address on *both* cards ... the trick comes from not knowing in advance whether the DHCP server will be on the inside connection or the net-facing one. (i.e. if the bridge is deployed near the network edge, the DHCP server is inside; but if it is deployed immediately in front of a single server, then it will see DHCP facing outwards). It *ought* to be possible to configure both hostname.xl0 and hostname.fxp1 as dhcp, and whichever one comes up first, will then bridge through the DHCP server for the other. Unfortunately it just happens by luck of alphabetical order, that the one which comes up first is *not* looking at a DHCP server. So after a relatively short period of retries it goes to sleep. Then the other interface asks for its dhcp address and gets it quickly. What I expected was that the first would sleep for a short time then ask again, and get it OK. I haven't seen that happen - about 30 minutes later and the interface still has no IP. What's the best way to ensure that they both get IPs as quickly as possible? I can think of some dirty hacks, but I don't like the solutions I've come up with. (For example, if I kick off the dhcp client requests in the background, that interferes with the rest of the boot sequence). Has anyone had this configuration before and come up with an elegant solution? thanks Graham Maybe I'm not understanding the problem, but for a tranparent bridge, you wouldn't want it to be assigned an IP address on either network card. hence the transparent part.
Re: OpenBSD's 10th birthday
On 10/18/05, Theo de Raadt [EMAIL PROTECTED] wrote: Now it is really OpenBSD's 10th birthday ;) I just want to say a hearty Thank you and Happy Birthday to OpenBSD and to all the developers, porters, advocates, and supporters. OpenBSD is by far the most stable, most secure, and quite frankly, easiest OS to use. Again, Happy Birthday. I raise my glass to another 10 years.
Re: OpenBSD's 10th birthday -- how about a present?
oops.. forgot to post to list. sorry. On 10/18/05, Samurai Chef [EMAIL PROTECTED] wrote: I pre-ordered 3.8 the day pre-orders were available on openbsd.orghttp://openbsd.org .
Re: OpenBSD Metastore: New kit, thanks
As you want everyone to look at this can help, you *should* probably remove the blocking you have in place. Just my $0.02 worth. On 10/13/05, Han Boetes [EMAIL PROTECTED] wrote: And of course this message ended up in my spam-filter, and I'm not even going to tell it it was a mistake. =) Szechuan Death wrote: Lars Hansson wrote: Our ip addresses are assigned from TWNIC, even though we're not actually in Taiwan, so that's probably why. The CIDR blocks in question is 203.65.244.0/22 http://203.65.244.0/22 and 203.65.248.0/22 http://203.65.248.0/22. # cb findip 203.65.244.1 http://203.65.244.1 203.65.248.1http://203.65.248.1 Netblock 203.64.0.0/14 http://203.64.0.0/14 is in country TW (TAIWAN) Netblock 203.64.0.0/14 http://203.64.0.0/14 is in country TW (TAIWAN) Yup, looks like. Sorry, Charlie. Take a flight to Taipei and snuff a spammer or scriptkiddie, if everybody does that TW can be put back on the Civilized Net Nation list. Arguments that US contains the most spam lords will be directed to /dev/null, I invite anybody who wants to to fly to Miami and snuff the top 20 archspammers too. Sorry, I don't feel like unblocking Taiwan and watching my logs fill with SSH scans, there's nothing I care about in Taiwan enough to do so. Alternately, find an ISP that is not so braindamaged that they get netblocks from another country. For a third choice, use tor or find a proxy that is in a netblock that is not allocated to one of the following countries: # cb showcc Blocked countries: AO (ANGOLA) BJ (BENIN) BF (BURKINA FASO) BI (BURUNDI) KH (CAMBODIA) CM (CAMEROON) CF (CENTRAL AFRICAN REPUBLIC) TD (CHAD) CN (CHINA) CD (CONGO, Democratic Republic of (was Zaire)) CG (CONGO, People's Republic of) CI (COTE D'IVOIRE) DJ (DJIBOUTI) GQ (EQUATORIAL GUINEA) ER (ERITREA) ET (ETHIOPIA) GA (GABON) GM (GAMBIA) GH (GHANA) GW (GUINEA-BISSAU) HT (HAITI) HK (HONG KONG) IR (IRAN (ISLAMIC REPUBLIC OF)) KE (KENYA) KP (KOREA, DEMOCRATIC PEOPLE'S REPUBLIC OF) KR (KOREA, REPUBLIC OF) LA (LAO PEOPLE'S DEMOCRATIC REPUBLIC) LB (LEBANON) LS (LESOTHO) LR (LIBERIA) LY (LIBYAN ARAB JAMAHIRIYA) MW (MALAWI) ML (MALI) MR (MAURITANIA) MZ (MOZAMBIQUE) MM (MYANMAR) NA (NAMIBIA) NE (NIGER) NG (NIGERIA) PK (PAKISTAN) PS (PALESTINIAN TERRITORY, Occupied) RW (RWANDA) SN (SENEGAL) SL (SIERRA LEONE) SG (SINGAPORE) SO (SOMALIA) SD (SUDAN) SZ (SWAZILAND) TW (TAIWAN) TZ (TANZANIA, UNITED REPUBLIC OF) UG (UGANDA) VN (VIET NAM) YE (YEMEN) ZM (ZAMBIA) ZW (ZIMBABWE) Note: anybody from any one of these countries, the same goes for you. Again, sorry. Don't complain about it, just go kill your spammers and scriptkiddiez and all is forgiven. I recommend cudgels, impalement on the stake, or forced immolation. It's not that great to have an obenbsd store that is inaccesible from a large part of the world though? I don't intend to host this for one second longer than I have to. I'm already uneasy, it's already showing up on Google and I imagine that it's going to get slashdotted at some point if it goes much further. This is not going to be live on my home DSL connection, it's going to be hosted somewhere else with a real Net connection (preferably openbsd.org http://openbsd.org), or it's going to go quietly away after I'm done beta- testing it, the end. You'll probably be able to access it then. # Han
