Re: [newbie] HTTPD (Failed)
line 574 of /etc/httpd/conf/httpd.conf (cd /etc/httpd/conf && cat httpd.conf|sed -e "s|#ServerName \ new.host.name|ServerName `hostname`|g" > httpd.conf.2 && mv httpd.conf \ httpd.conf.original && mv httpd.conf.2 httpd.conf && \ /etc/rc.d/init.d/httpd start ) || echo "Errors bailing out" should do the trick, if not goto line 574 and read it ;) On Sun, 11 Jul 1999, James J. Capone wrote: > When I start up and it starts all of my programs I get > > Starting HTTPD [Failed] > HTTPD unable to set host name > use ServerName directive to correct.. > > > Can anyone tell me what is going on. > > Here is what my /etc/hosts file look like > > #127.0.0.1 Localhost localhost.localdomain > 127.0.0.1 LocalhostMajestic.localdomain > > > > Thanks > > James J. Capone >
RE: [newbie] HTTPD (Failed)
Thanks, Will try it.. James -Original Message- From: Civileme [SMTP:[EMAIL PROTECTED]] Sent: Sunday, July 11, 1999 1:56 AM To: [EMAIL PROTECTED] Subject:Re: [newbie] HTTPD (Failed) Your server configuration file dictates the host name for URL redirection, not /etc/hosts You might FIND http.conf or ../httpd.conf or specify it with httpd -f .../somekinda_homemade_config_file Michael Moore "James J. Capone" wrote: > When I start up and it starts all of my programs I get > > Starting HTTPD [Failed] > HTTPD unable to set host name > use ServerName directive to correct.. > > Can anyone tell me what is going on. > > Here is what my /etc/hosts file look like > > #127.0.0.1 Localhost localhost.localdomain > 127.0.0.1 LocalhostMajestic.localdomain > > Thanks > > James J. Capone
Re: [newbie] "Login incorrect" without a password prompt....
> Since you just installed it, it would be wise to try again and to ask for "Check for Bad Blocks". The age of your computer and hard disk suggests that this is a possibility for the sort of error you have. The authentication process is corrupted and is respawning because it is finding itself corrupt and committing suicide, as every properly written daemon does. Civileme > > > -Original Message- > From: Adrian Grigorof [SMTP:[EMAIL PROTECTED]] > Sent: Sunday, July 11, 1999 12:41 AM > To: [EMAIL PROTECTED] > Subject:[newbie] "Login incorrect" without a password prompt > > I have installed a fresh Mandrake 6.0 on a Pentium 100, 64 MB RAM, 1 GB IDE, > AHA1520 SCSI Controller, S3 video chipset, Sound Blaster and Compaq > Netelligent network card. > The installation goes fine , but when the installation finishes, and I > reboot, I get to the login screen and then for any login name that I enter I > get the response "Login incorrect". The screen simply refreshes, and I'm > back to the login prompt. I've tried "root" as well as the username that I > created during setup. I don't even get a password prompt. The refresh is > so fast you can barely see the "login incorrect" message before is > disappears. If I try this too many times (about 10), I get a message > saying: > > "INIT: Id "1" respawning too fast: disabled for 5 minutes" > > Any help is appreciated!
Re: [newbie] WINE
Mandrake 5.x or 6, and which version of WINE? /usr/bin/wine "C:\program files\accessories\wordpad.exe" would run WordPad from windows if your wine.conf file had the right entries and your wine is 990518, but earlier versions use a different syyntax and ... Some of the current documentation still refers to it. So I would need more information to help you. Michael Moore Steve Winston wrote: > I've tried WINE again and again with no luck.Can anyone send me a > sample script using Mandrake's version of WINE. I have samples off > Dejanews, but they are a little different and they don't work for me > anyway. > thanks, Steve w. > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com
Re: [newbie] HTTPD (Failed)
Your server configuration file dictates the host name for URL redirection, not /etc/hosts You might FIND http.conf or ../httpd.conf or specify it with httpd -f .../somekinda_homemade_config_file Michael Moore "James J. Capone" wrote: > When I start up and it starts all of my programs I get > > Starting HTTPD [Failed] > HTTPD unable to set host name > use ServerName directive to correct.. > > Can anyone tell me what is going on. > > Here is what my /etc/hosts file look like > > #127.0.0.1 Localhost localhost.localdomain > 127.0.0.1 LocalhostMajestic.localdomain > > Thanks > > James J. Capone
RE: [newbie] "Login incorrect" without a password prompt....
try to type Linux single at the Lilo prompt. This may allow you into the system.. This way you can run Linuxconf. And see if you can fix it from there. Soryy never had this problem yet.. James J. Capone -Original Message- From: Adrian Grigorof [SMTP:[EMAIL PROTECTED]] Sent: Sunday, July 11, 1999 12:41 AM To: [EMAIL PROTECTED] Subject:[newbie] "Login incorrect" without a password prompt I have installed a fresh Mandrake 6.0 on a Pentium 100, 64 MB RAM, 1 GB IDE, AHA1520 SCSI Controller, S3 video chipset, Sound Blaster and Compaq Netelligent network card. The installation goes fine , but when the installation finishes, and I reboot, I get to the login screen and then for any login name that I enter I get the response "Login incorrect". The screen simply refreshes, and I'm back to the login prompt. I've tried "root" as well as the username that I created during setup. I don't even get a password prompt. The refresh is so fast you can barely see the "login incorrect" message before is disappears. If I try this too many times (about 10), I get a message saying: "INIT: Id "1" respawning too fast: disabled for 5 minutes" Any help is appreciated!
Re: [newbie] "Login incorrect" without a password prompt....
at the lilo prompt at start up, type: linux single _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
[newbie] HTTPD (Failed)
When I start up and it starts all of my programs I get Starting HTTPD [Failed] HTTPD unable to set host name use ServerName directive to correct.. Can anyone tell me what is going on. Here is what my /etc/hosts file look like #127.0.0.1 Localhost localhost.localdomain 127.0.0.1 LocalhostMajestic.localdomain Thanks James J. Capone
[newbie] "Login incorrect" without a password prompt....
I have installed a fresh Mandrake 6.0 on a Pentium 100, 64 MB RAM, 1 GB IDE, AHA1520 SCSI Controller, S3 video chipset, Sound Blaster and Compaq Netelligent network card. The installation goes fine , but when the installation finishes, and I reboot, I get to the login screen and then for any login name that I enter I get the response "Login incorrect". The screen simply refreshes, and I'm back to the login prompt. I've tried "root" as well as the username that I created during setup. I don't even get a password prompt. The refresh is so fast you can barely see the "login incorrect" message before is disappears. If I try this too many times (about 10), I get a message saying: "INIT: Id "1" respawning too fast: disabled for 5 minutes" Any help is appreciated!
[newbie] WINE
I've tried WINE again and again with no luck.Can anyone send me a sample script using Mandrake's version of WINE. I have samples off Dejanews, but they are a little different and they don't work for me anyway. thanks, Steve w. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: [newbie] shutdown problem fixed
On Sat, 10 Jul 1999, Rhichard Barth & Family wrote: > > > Axalon wrote: > > > On Wed, 30 Jun 1999, Flight16 wrote: > > > > > For anybody else having the problem I was of a huge error crashing their system > > > whenever the shutdown script tried to halt, it is because of the power off >command, > > > like Axalon said, but the specific problem comes from the -p parameter that >tries to > > > power down your pc. This command is near the end in SShalt script.. Just look >in > > > your /etc/rc.d/rc0.d directory, and edit one of the last lines which contain >"halt -i > > > -d -p" so that it doesn't contain the p, and is just "halt -i -d" and any other > > > parameters you used with it. Hope this helps somebody else out there. See ya. > > > > > > Flight16 > > > > > > > Found it !! found what? /etc/rc.d/init.d/halt? > but it won't let me save the changes.. disk is mounted readonly or your not root, mount /dev/hd?? / -o rw -o remount > can I rename it? not if the disk is mounted readonly
Re: [newbie] shutdown problem fixed
Axalon wrote: On Wed, 30 Jun 1999, Flight16 wrote: > For anybody else having the problem I was of a huge error crashing their system > whenever the shutdown script tried to halt, it is because of the power off command, > like Axalon said, but the specific problem comes from the -p parameter that tries to > power down your pc. This command is near the end in SShalt script.. Just look in > your /etc/rc.d/rc0.d directory, and edit one of the last lines which contain "halt -i > -d -p" so that it doesn't contain the p, and is just "halt -i -d" and any other > parameters you used with it. Hope this helps somebody else out there. See ya. > > Flight16 Ok hows this? Warning:couldn't open /ect/fstab: no such file or directory ext2fs_check_if_mount: No such file or directory while determining whether / is mounted. fsck.ext2:Is a directory while trying to open / /: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not a swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 try that and I get. ***An error occurred during the file system check. ***Dropping you to a shell;the system will reboot ***when you leave the shell. Give root password for maintenance (or type Control-D for normal startup ): Any Ideas? what can I do from here? I tried to remove the -P from /ect/rc.d/rc0.d But it won't let me save the file even as SU Rhich "The Phoneless Guy" Icq 8150164
Re: [newbie] shutdown problem fixed
Axalon wrote: > On Wed, 30 Jun 1999, Flight16 wrote: > > > For anybody else having the problem I was of a huge error crashing their system > > whenever the shutdown script tried to halt, it is because of the power off command, > > like Axalon said, but the specific problem comes from the -p parameter that tries >to > > power down your pc. This command is near the end in SShalt script.. Just look in > > your /etc/rc.d/rc0.d directory, and edit one of the last lines which contain "halt >-i > > -d -p" so that it doesn't contain the p, and is just "halt -i -d" and any other > > parameters you used with it. Hope this helps somebody else out there. See ya. > > > > Flight16 > > > Found it !! but it won't let me save the changes.. can I rename it?
Re: [newbie] shutdown problem fixed
Flight16 wrote: For anybody else having the problem I was of a huge error crashing their system whenever the shutdown script tried to halt, it is because of the power off command, like Axalon said, but the specific problem comes from the -p parameter that tries to power down your pc. This command is near the end in SShalt script.. Just look in your /etc/rc.d/rc0.d directory, and edit one of the last lines which contain "halt -i -d -p" so that it doesn't contain the p, and is just "halt -i -d" and any other parameters you used with it. Hope this helps somebody else out there. See ya. Flight16 Hey... I tried all this and it's still not helping me...I go to close or "End session".. It hangs there for about two minutes and then finally shuts down.. The only thing is, it won't reboot...I get tons of errors and the go by on the screen so fast I can't read half of them, I did catch one /ect/fstab missing or thats at least part of it I seem to lose fstab and mtab on every boot can I restore these in MC? Is there an error log that I can read? Don't want to start over again&again&again... I seem to lose everything I was working on including saved files and my newly created icons Rhich Barth "The Phoneless Guy" ICQ8150164 [EMAIL PROTECTED]
Re: [newbie] Fwd: Re: [SATLUG] more networking help
On Sat, 10 Jul 1999, Dan Brown wrote: > From: Axalon <[EMAIL PROTECTED]> > > > No there is no limit of pc's only line length and that actualy depends > on > > the cable quality. > > Not so. Actually, I was wrong too--the max is 30 PCs per 10Base2 > segment. You can populate up to three segments with computers, using > repeaters between the segments. Each segment can be no more than 185 > meters long. This is the key here. It doesn't power up and go opps you have 31 pc's i'm going to shut off. It powers up and test the signal, if it's not within the defined standard it does what ever the manufacturer told it to do. A repeater (in laymens terms) is just an amplifier/filter combination. So uh whats the signal loss / resistance on a 185meter section of cat5, should anyone have the equipment to test or know where to locate the iso specs it'd make wonderful trivia.. > If you need more than 90 computers on an ethernet network, > you can (1) use one or more routers to split the network, (2) use > 10BaseT (UTP), or (3) use 10Base5 (thicknet). Oh and my bnc hubs hold 10 secments and one uplink port
[newbie] I want off please.
Um.. how do you get off this list?
Re: [newbie] Fwd: Re: [SATLUG] more networking help
From: Axalon <[EMAIL PROTECTED]> > No there is no limit of pc's only line length and that actualy depends on > the cable quality. Not so. Actually, I was wrong too--the max is 30 PCs per 10Base2 segment. You can populate up to three segments with computers, using repeaters between the segments. Each segment can be no more than 185 meters long. If you need more than 90 computers on an ethernet network, you can (1) use one or more routers to split the network, (2) use 10BaseT (UTP), or (3) use 10Base5 (thicknet).
Re: [newbie] Fwd: Re: [SATLUG] more networking help
On Sat, 10 Jul 1999, Dan Brown wrote: > From: Jeremy Mann <[EMAIL PROTECTED]> > > > 3c5090 I had laying around, and bingo, it worked. Now I know by using > BNC > > connectors I don't need a hub of any sort, so is there a limitation on > the > > amount of computers I can daisy-chain? > > Yes, there is, but it's pretty high--I think 90 is the limit, or 185 > meters of cable, whichever comes first. > No there is no limit of pc's only line length and that actualy depends on the cable quality. And they do make dedicated BNC hubs in addition to the BNC uplink you'll find on some 10baseT hubs
Re: [Re: [Re: [newbie] installing Mandrake?]]
I'll do it thanks for the tip. Phil Jeremy Mann <[EMAIL PROTECTED]> wrote: On Sat, 10 Jul 1999, you wrote: > No, there is only one for win98 FAT, but it is set for the full 4 megs space. > Could this be the problem? Do I have to reduce the amount of space alloted to > win98? > > Phil Here Phil, the easiest way would be to get a program called Partition Magic 4.0. By the sound of it, you would have to format the drive and start over again. With Partition Magic you don't have to, plus they include a handy wizard to setup a Linux partition(s). Jeremy Get free e-mail and a permanent address at http://www.netaddress.com/?N=1
Re: [newbie] Fwd: Re: [SATLUG] more networking help
There is a limit to the length of cable you can use, and data collisions will be more frequent with more computers on the same coax daisy chain, and there will always be some bonehead who will disconnect the cable from the T rather than the T from his computer. For 2 computers there is also a crossover or "uplink" cable with RJ 45 connectors. Yes, it is true that many Linux distributions have troubles with identifying and driving NE2000 clones. The problem is more the vaeracity of the clone than the Linux driver. Michael Moore aka Civileme > On Sat, 10 Jul 1999, you wrote: > > > Thanks, but the problem was my NE2000 card. I simply swapped it for another > 3c5090 I had laying around, and bingo, it worked. Now I know by using BNC > connectors I don't need a hub of any sort, so is there a limitation on the > amount of computers I can daisy-chain? > > Jeremy
Re: [newbie] Fwd: Re: [SATLUG] more networking help
In theory there is a limit, but in practicality, unless you're going to be hooking up dozens of computers, not likely. :-) (Still, though, there are other problems you may run into with Coax, which aren't present in twisted pair.) John - Original Message - From: Jeremy Mann <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, July 10, 1999 7:23 PM Subject: Re: [newbie] Fwd: Re: [SATLUG] more networking help > On Sat, 10 Jul 1999, you wrote: > > > *DO NOT* remove the tee's and caps. They're a design part of the hardware > > known as the "physical link layer" and that part is working fine. Remember, > > you can see packets on the other machine. And never plug together two tees > > to get a junction with three connections. (At least not if you need it to > > be reliable!) > > Thanks, but the problem was my NE2000 card. I simply swapped it for another > 3c5090 I had laying around, and bingo, it worked. Now I know by using BNC > connectors I don't need a hub of any sort, so is there a limitation on the > amount of computers I can daisy-chain? > > > Jeremy >
Re: [newbie] Fwd: Re: [SATLUG] more networking help
From: Jeremy Mann <[EMAIL PROTECTED]> > 3c5090 I had laying around, and bingo, it worked. Now I know by using BNC > connectors I don't need a hub of any sort, so is there a limitation on the > amount of computers I can daisy-chain? Yes, there is, but it's pretty high--I think 90 is the limit, or 185 meters of cable, whichever comes first.
Re: [Re: [newbie] installing Mandrake?]
On Sat, 10 Jul 1999, you wrote: > No, there is only one for win98 FAT, but it is set for the full 4 megs space. > Could this be the problem? Do I have to reduce the amount of space alloted to > win98? > > Phil Here Phil, the easiest way would be to get a program called Partition Magic 4.0. By the sound of it, you would have to format the drive and start over again. With Partition Magic you don't have to, plus they include a handy wizard to setup a Linux partition(s). Jeremy
Re: [newbie] Fwd: Re: [SATLUG] more networking help
On Sat, 10 Jul 1999, you wrote: > *DO NOT* remove the tee's and caps. They're a design part of the hardware > known as the "physical link layer" and that part is working fine. Remember, > you can see packets on the other machine. And never plug together two tees > to get a junction with three connections. (At least not if you need it to > be reliable!) Thanks, but the problem was my NE2000 card. I simply swapped it for another 3c5090 I had laying around, and bingo, it worked. Now I know by using BNC connectors I don't need a hub of any sort, so is there a limitation on the amount of computers I can daisy-chain? Jeremy
Re: [newbie] shell scripts
On Mon, 08 May 2000, you wrote: > On Fri, 9 Jul 1999, Yants wrote: > > > how do i write shell scripts..? > > can someone please show me an example... > > Here's an example from Richard Petersen's handy Linux Programmer's Reference: (Good book to have around) #!/bin/bash #Program to allow the user to select different #ways of listing files echo s. List Sizes echo l. List All file info echo c. List C files echo -n "Please enter choice: " read choice case $choice in s) ls -s ;; l) ls -l ;; c) ls *.c ;; *) echo Invalid Option esac copy it, save it as, for example, lschoice, and chmod u+x so that you can execute it by typing ./lschoice HTH Irv Mullins
Re: [newbie] shell scripts
At 10:34 PM 7/9/99 -0700, you wrote: >how do i write shell scripts..? >can someone please show me an example... cd to /usr/bin type "file *" This will give a list of the file type for everything in the /usr/bin directory, and many of them are really, really good professionally done shell scripts of different types. Copy some of them to your home directory and start hacking away. Look at the O'Rielly Nutshell books, too. MB -- Michael R. Batchelor Industrial Informatics & Instrumentation, Inc.
Re: [Re: [newbie] installing Mandrake?]
No, there is only one for win98 FAT, but it is set for the full 4 megs space. Could this be the problem? Do I have to reduce the amount of space alloted to win98? Phil Steve Winston <[EMAIL PROTECTED]> wrote: Does DiskDruid show you that there are some extra DOS partitions there? Left over from installing Win98? Maybe that is the problem. You may have to delete them (but not the one where your win98 resides). --- phil <[EMAIL PROTECTED]> wrote: > I'm having trouble installing this. When I try to > create a partition useing > the Disk Druid I get a message saying theres not > enough alloted space. I'm > only useing 1 of 4 gigs on my hard drive for Win 98. > What am I doing wrong? > Thanks in advance for your help. > Phil > > > Get free e-mail and a permanent address at > http://www.netaddress.com/?N=1 > _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Get free e-mail and a permanent address at http://www.netaddress.com/?N=1
Re: [newbie] Fwd: Re: [SATLUG] more networking help
At 01:27 PM 7/9/99 -0500, you wrote: >I'm using a BNC cable with 2 'tee's' with caps on each end. >Should I do away with the 'tees' just plug them in directly to solve my >problem? *DO NOT* remove the tee's and caps. They're a design part of the hardware known as the "physical link layer" and that part is working fine. Remember, you can see packets on the other machine. And never plug together two tees to get a junction with three connections. (At least not if you need it to be reliable!) MB -- Michael R. Batchelor Industrial Informatics & Instrumentation, Inc.
Re: [newbie] shell scripts
Kuraiken wrote: > Yants wrote: > > > > how do i write shell scripts..? > > can someone please show me an example... > Here's one, for /etc/bashrc: first, write vi /etc/bashrc Then, hit the i-key so you write the script. Then: #shutting down i: alias adios='/sbin/shutdown -h now' alias reboot='/sbin/shutdown -r now' The next time you want to shutdown, just change to su and type adios. Or reboot, depending on your circumstance.
Re: [newbie] shell scripts
On Fri, 9 Jul 1999, Yants wrote: > how do i write shell scripts..? > can someone please show me an example... > -=-=- useless bash script v1.0 #!/bin/bash sleep 10 -=-=-
Re: [newbie] installing Mandrake?
De-increment the number by 1meg at a time untill it does not error anymore On Sat, 10 Jul 1999, Steve Winston wrote: > Does DiskDruid show you that there are some extra DOS partitions there? > Left over from installing Win98? Maybe that is the problem. You may > have to delete them (but not the one where your win98 resides). > > --- phil <[EMAIL PROTECTED]> wrote: > > I'm having trouble installing this. When I try to > > create a partition useing > > the Disk Druid I get a message saying theres not > > enough alloted space. I'm > > only useing 1 of 4 gigs on my hard drive for Win 98. > > What am I doing wrong? > > Thanks in advance for your help. > > Phil > > > > > > Get free e-mail and a permanent address at > > http://www.netaddress.com/?N=1 > > > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com >
Re: [newbie] shell scripts
Yants wrote: > > how do i write shell scripts..? > can someone please show me an example... You know what shell script is, right? Well, the question of how depends on the shell you're using. pdksh, csh (c shell), bash all have slightly different err...dialects. Also, you can right "shell" scripts using perl or python. Here's an example in python: Argh...I cannot cut and paste from kedit to netscape messenger...rats...it's the multiple file rename script I wrote a long time ago...it's simple enough to understand. If you're interested, please mail me. (don't want to flood the list with silly hacks :-\) -- - Kuraiken - Python fanatic. - Python. Try it. It'll swallow you whole! -
Re: [Re: [newbie] reached maximal mount count]
[EMAIL PROTECTED] wrote: On 9 Jul, Don Whitman wrote: > Fellow newbies, I have reached maximal mount count. More specifically, When I > start linux, when it gets to Checking Root file system it says; /dev/hda5 has > reached maximal mount count, check forced. Then it does nothing. I would of > course be open to any suggestions. I installed linux-mandrake 6.0 starting at > 7 gbs and it is currently 1.3gbs in size. Everything was running fine today > and then this! With a drive that size it will take a while to check, The first time I saw that it threw me too ;-). It is like the Windows scandisk but more thorough. Go make a sandwich and let it run. Thanks Robert for the advice. It worked. I guess I just jumped the gun. Live and learn. Later, D -- Robert Sheskin [EMAIL PROTECTED] ICQ 5788323 AIM RobertLS Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
Re: [newbie] installing Mandrake?
Does DiskDruid show you that there are some extra DOS partitions there? Left over from installing Win98? Maybe that is the problem. You may have to delete them (but not the one where your win98 resides). --- phil <[EMAIL PROTECTED]> wrote: > I'm having trouble installing this. When I try to > create a partition useing > the Disk Druid I get a message saying theres not > enough alloted space. I'm > only useing 1 of 4 gigs on my hard drive for Win 98. > What am I doing wrong? > Thanks in advance for your help. > Phil > > > Get free e-mail and a permanent address at > http://www.netaddress.com/?N=1 > _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
[newbie] installing Mandrake?
I'm having trouble installing this. When I try to create a partition useing the Disk Druid I get a message saying theres not enough alloted space. I'm only useing 1 of 4 gigs on my hard drive for Win 98. What am I doing wrong? Thanks in advance for your help. Phil Get free e-mail and a permanent address at http://www.netaddress.com/?N=1