Re: [opensuse] VirtualBox on openSUSE 10.0
Well, yes, I worked with VirtualBox on SUSE Linux 10.0. Use cross-distro installer, and read here: http://forgeftp.novell.com/lfl/.html/virtualbox.html -- -Alexey Eremenko "Technologov" -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox on openSUSE 10.0
On Monday 28 January 2008 10:13:55 am Roger Oberholtzer wrote: > Anyone running VirtualBox on openSUSE 10.0? Can one use the > SUSE-supplied RPM? Use the ones from the project site. I has several issues like no usb support on the ones released from opensuse. -- /ch -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox and USB support
Chris H wrote: > On Sunday 27 January 2008 11:37:19 pm Ken Schneider wrote: > > >> USB will not work with the version shipped with openSUSE (the OSE >> version). You will need to download and install the version from here: >> http://www.virtualbox.org/wiki/Downloads >> > > tks...:) > You also have to uninstall the suse version and its kernel module manually as the two versions can exist side by side and cause problems. You enable the usb devices via filters. Dave -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox and USB support
On Sunday 27 January 2008 11:37:19 pm Ken Schneider wrote: > USB will not work with the version shipped with openSUSE (the OSE > version). You will need to download and install the version from here: > http://www.virtualbox.org/wiki/Downloads tks...:) -- /ch -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox and USB support
Chris H pecked at the keyboard and wrote: > Greets: > > Following this instruction http://en.opensuse.org/VirtualBox_USB_Support I > ended up with an entry in /etc/fstab as follows: > > none /proc/bus/usb usbfs devgid=110,devmode=664 0 0 > > This did not work so got on IRC and the helpfull folks suggested the > following > line: > > usbfs /proc/bus/usb usbfs devgid=110,devmode=664 0 0 > > But this does not seem to give the desired results either. So I'm in the dark > and clueless as to how to sort this out. Any advice would be appreciated, and > yes I did reboot after each change and vbox does work perfectly other then > USB support is not shown in the manager. ?? > > TIA USB will not work with the version shipped with openSUSE (the OSE version). You will need to download and install the version from here: http://www.virtualbox.org/wiki/Downloads -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox versus WMware
On Fri, 2008-01-25 at 08:44 +0100, Jos van Kan wrote: > Jerry Feldman schreef: > > On Sun, 20 Jan 2008 18:35:02 +0100 > > Philippe Landau <[EMAIL PROTECTED]> wrote: > > > >> Maura Edelweiss Monville wrote: > >>> Since I have to use MS Office every > >>> now and then I would consider to run alternatively > >>> Windows and SuSE through WMware. Now I run MS Office > >>> through CrossOveR. > >>> Is WMware stable and reliable ? > >> Yes, others recommend VirtualBox though (free too). > >> Or if it is just for that: Crossover Office, which is not free. > >> Which one is easier to install and backup ? > > > > I found Virtualbox to be a bit easier to install than VMWare. > > However, VMWare, Virtualbox, WINE and Crossover Office (essentially > > WINE +) are all excellent products. > > > > I think I would recommend using CrossoverOffice for Maura. > > CrossoverOffice and WINE are Linux native programs (and libraries) that > > fool Windows applications into believing they are running on Windows. > > Therefore, all your files can be kept on your Linux file system and > > available to you from Linux. > > I found CrossOverOffice excruciatingly slow when using an Access database to > print labels in Word. (About the only use I have for XP, apart from playing > bridge on the net. :-) Now I use XP on Vmware and access my Linux filesystem > with Samba (or whatever it is called now, cifs I believe). I also print via > Samba, although in theory XP should be able to access the CUPS-server, but I > never could get that to work. VMware is stable as a rock and in my set up you > must not forget to restart the smb and nmb deamons after a Samba security > update. :-) In short, YMMV. > > Regards, > -- > Jos van Kanregistered Linux user #152704 Jos, Crossover works great with word, excel and powerpoint not Access. BTW I do not know anybody (:-) using Access, even MS do not use access for what I heard (?). There are a zillion way to print labels. This is my approach: I use evolution for my list of contacts and I do the labels under OO. If you need to use Access then you are using the correct approach: VMware etc or multiboot. -=terry=- -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox versus WMware
Jerry Feldman schreef: > On Sun, 20 Jan 2008 18:35:02 +0100 > Philippe Landau <[EMAIL PROTECTED]> wrote: > >> Maura Edelweiss Monville wrote: >>> Since I have to use MS Office every >>> now and then I would consider to run alternatively >>> Windows and SuSE through WMware. Now I run MS Office >>> through CrossOveR. >>> Is WMware stable and reliable ? >> Yes, others recommend VirtualBox though (free too). >> Or if it is just for that: Crossover Office, which is not free. >> Which one is easier to install and backup ? > > I found Virtualbox to be a bit easier to install than VMWare. > However, VMWare, Virtualbox, WINE and Crossover Office (essentially > WINE +) are all excellent products. > > I think I would recommend using CrossoverOffice for Maura. > CrossoverOffice and WINE are Linux native programs (and libraries) that > fool Windows applications into believing they are running on Windows. > Therefore, all your files can be kept on your Linux file system and > available to you from Linux. I found CrossOverOffice excruciatingly slow when using an Access database to print labels in Word. (About the only use I have for XP, apart from playing bridge on the net. :-) Now I use XP on Vmware and access my Linux filesystem with Samba (or whatever it is called now, cifs I believe). I also print via Samba, although in theory XP should be able to access the CUPS-server, but I never could get that to work. VMware is stable as a rock and in my set up you must not forget to restart the smb and nmb deamons after a Samba security update. :-) In short, YMMV. Regards, -- Jos van Kanregistered Linux user #152704 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox versus WMware (was: SuSE 10.3 troubles on my GamePC laptop
On Sun, 20 Jan 2008 18:35:02 +0100 Philippe Landau <[EMAIL PROTECTED]> wrote: > Maura Edelweiss Monville wrote: > > Since I have to use MS Office every > > now and then I would consider to run alternatively > > Windows and SuSE through WMware. Now I run MS Office > > through CrossOveR. > > Is WMware stable and reliable ? > Yes, others recommend VirtualBox though (free too). > Or if it is just for that: Crossover Office, which is not free. > Which one is easier to install and backup ? I found Virtualbox to be a bit easier to install than VMWare. However, VMWare, Virtualbox, WINE and Crossover Office (essentially WINE +) are all excellent products. I think I would recommend using CrossoverOffice for Maura. CrossoverOffice and WINE are Linux native programs (and libraries) that fool Windows applications into believing they are running on Windows. Therefore, all your files can be kept on your Linux file system and available to you from Linux. VMWare, VirtualBox, and other virtualization products actually run full blown Windows on your system, but the virtual machine drive is essentially hidden from the host OS. The advantage of using a VM is the cases where you need to have some Windows applications or services that are simply not available under Linux. Last summer, I did this because my wife needed to use RealPlayer with a licensed feed, and the authentication had to be through Windows. I could authenticate through MSIE under Crossover, but it also needed RealPlayer 10, which does not run under Crossover Office. The solution was VMWare at the time. (Actually, the solution ended up by fixing up an old laptop). I was using VMWare server since it was free. VMWare Player would have been a better choice, but for some reason I didn't find a pre-built WindowsXP VM and Ubuntu had VMware Player in its installation database. -- -- Jerry Feldman <[EMAIL PROTECTED]> Boston Linux and Unix PGP key id: 537C5846 PGP Key fingerprint: 3D1B 8377 A3C0 A5F2 ECBB CA3B 4607 4319 537C 5846 signature.asc Description: PGP signature
Re: [opensuse] Virtualbox versus WMware
On Monday 21 January 2008 06:23:48 Teruel de Campo MD wrote: > On Sun, 2008-01-20 at 18:35 +0100, Philippe Landau wrote: > > Maura Edelweiss Monville wrote: > > > Since I have to use MS Office every > > > now and then I would consider to run alternatively > > > Windows and SuSE through WMware. Now I run MS Office > > > through CrossOveR. > > > Is WMware stable and reliable ? > > > > Yes, others recommend VirtualBox though (free too). > > Or if it is just for that: Crossover Office, which is not free. > > Which one is easier to install and backup ? > > VM ware is a very professional virtual system. Ain't cheap. I have > the workstation. I tried VirtualBox, qemu and all of them worked but > nothing is comparable to VMware. I do not use or need VMware for MS > office. VMware is also very easy to backup. It does everything you > can think off and more. VMware comes in three options: 1. Workstation 2. Server 3. ESX Server Workstation is a fully featured desktop virtualisation program that installs on a host OS (Windows or Linux) and allows multiple guest OSs to be installed. Has multiple snapshots and VM cloning available. Has a price attached to it. Whether this is considered expensive depends though. Server is a desktop virtualisation program that is installed on Windows or Linux and that in some ways is more limited than workstation in that you can have only one snapshot and no cloning. However it does allow remote connections to be made and the VMs run without the console being open (not sure if workstation does this). Best of all, it's got no cost attached to it. ESX Server is an enterprise server virtualisation solution that installs on bare metal and you then install multiple guest OSs on top. Lots of management utilities and resource allocation per machine tools available. Also very expensive for individual users... Jon -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox versus WMware
On Sun, 2008-01-20 at 15:23 -0700, Teruel de Campo MD wrote: > On Sun, 2008-01-20 at 18:35 +0100, Philippe Landau wrote: > > Maura Edelweiss Monville wrote: > > > Since I have to use MS Office every > > > now and then I would consider to run alternatively > > > Windows and SuSE through WMware. Now I run MS Office > > > through CrossOveR. > > > Is WMware stable and reliable ? > > Yes, others recommend VirtualBox though (free too). > > Or if it is just for that: Crossover Office, which is not free. > > Which one is easier to install and backup ? > > I do all my work in OO and to send it I save as MS office. If it is a > complicated stuff or a presentation I do a quick check with MS running > under crossover. Crossover works great with word, excel and pp. If you > want outlook or access it will not work. > Crossover is very reliable and it works as a linux program. I love it. > The backup is very easy and protect all the MS license. It creates an > archive called bottles that can be save as or even create an rpm. It can > be imported in another system as well. > VM ware is a very professional virtual system. Ain't cheap. I have the > workstation. I tried VirtualBox, qemu and all of them worked but nothing > is comparable to VMware. I do not use or need VMware for MS office. > VMware is also very easy to backup. It does everything you can think off > and more. > -=terry=- > Actually Outlook 2003 does work with Crossover and is supported by Codeweavers. I use it everyday both on my SLED SP1 desktop and my OpenSUSE 10.3 laptop to connect to our Exchange server. Crossover even supports Outlook's RPC over HTTPS connection mode. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox versus WMware
On Sun, 2008-01-20 at 18:35 +0100, Philippe Landau wrote: > Maura Edelweiss Monville wrote: > > Since I have to use MS Office every > > now and then I would consider to run alternatively > > Windows and SuSE through WMware. Now I run MS Office > > through CrossOveR. > > Is WMware stable and reliable ? > Yes, others recommend VirtualBox though (free too). > Or if it is just for that: Crossover Office, which is not free. > Which one is easier to install and backup ? I do all my work in OO and to send it I save as MS office. If it is a complicated stuff or a presentation I do a quick check with MS running under crossover. Crossover works great with word, excel and pp. If you want outlook or access it will not work. Crossover is very reliable and it works as a linux program. I love it. The backup is very easy and protect all the MS license. It creates an archive called bottles that can be save as or even create an rpm. It can be imported in another system as well. VM ware is a very professional virtual system. Ain't cheap. I have the workstation. I tried VirtualBox, qemu and all of them worked but nothing is comparable to VMware. I do not use or need VMware for MS office. VMware is also very easy to backup. It does everything you can think off and more. -=terry=- -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox & XP-pro & serial madness
On Sat, 2008-01-12 at 12:16 -0700, Tom Patton wrote: > On Sat, 2008-01-12 at 19:14 +0200, Dave Plater wrote: > > Tom Patton wrote: > > > On Sat, 2008-01-12 at 09:29 -0600, Stevens wrote: > > > > > >> > > > > > I've found its better to leave the filters out of the initial setup and > > after starting xp, plug in usb device and then use the devices menu on > > the vbox window to enable the device. > Now that I have it working, I will try your method, and see if > "hot-plug" will work. It should, unless they have a bug in VB. Dave, it seems hot-plugging works fine. I have repeatedly swapped from the Belkin dongle to an ICOM radio USB programming cable, and each time they have worked well. I simply left both items active in the VB filter menu, and the XP guest was able to keep track of which one I had in the side port of my Thinkpad R40 laptop. XP would give the Belkin com3, and the ICOM cable com4...(without restarts of the guest...). I still think VB should pass through the dongle as ttyUSB0, and let SuSE handle it...but it works this way, so far. Pretty cool...I guess. Tom in NM -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox & XP-pro & serial madness
On Sat, 2008-01-12 at 19:14 +0200, Dave Plater wrote: > Tom Patton wrote: > > On Sat, 2008-01-12 at 09:29 -0600, Stevens wrote: > > > >> > > > I've found its better to leave the filters out of the initial setup and > after starting xp, plug in usb device and then use the devices menu on > the vbox window to enable the device. Another tip is to completely > uninstall the suse virtual box, including the kernel module, as yast > won't make you do so, before installing > VirtualBox-1.5.4_27034_openSUSE102-1.i586.rpm . It contains everything > it needs. It has a comprehensive help system too. > Dave Thanks, Dave, I should have expounded on removing the OSS version and driver first. I rmmod'd the driver, then rpm -e'd the virtualbox OSS rpm before I installed the 1.5.4 version. Thanks for reminding me. Now that I have it working, I will try your method, and see if "hot-plug" will work. It should, unless they have a bug in VB. I do think it is a bug for VB to not allow the serial access to ttyUSB0, but that is a subject for their forum, I guess. Tom in NM -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox & XP-pro & serial madness
Tom Patton wrote: > On Sat, 2008-01-12 at 09:29 -0600, Stevens wrote: > >> Tom: >> >> Read your post about VB, XP and serial port stuff. >> >> Do I understand you correctly that you have VB running >> on a Linux host with XP guest AND it recognizes a usb device? >> >> If so, please give me some details on how to do that. I am >> running opensuse 10.2, kernet 2.6.18. >> >> Thanks, >> Fred >> >> > Fred, good morning, > > > I'll have to think back thru all the attempts to figure out a > step-by-step, it was a rather hacked way I went about it, since I had > forgotten several admin things that always irked me with windoz! > > I imagine that your problem may be that the open-source release of VB > does not include usb support _at all_. You need to get > http://www.virtualbox.org/download/1.5.4/VirtualBox-1.5.4_27034_openSUSE102-1.i586.rpm > > the binary install for 10.2. I'm using 10.3 32-bit version, but others > in their forum are using 10.2, so good luck. > > Remove the Oss version (but don't delete the XP guest files). Install > VB closed-source, attach the original virtual files, insert the usb > device, and launch VB. Do NOT launch the guest yet... > > If you get there, you will see a USB item in the VB details tab. (I > think you _have_ to insert the usb device B4 launching VB.) In the USB > dialog, there is a filter section. The small icons at the right > indicate known usb devices, add the one you wish to use (in my case it > is the Belkin converter dongle). I would add JUST the device of > interest, not all of them. > > Next, start the XP guest, and do all the crap XP needs to use the > device. I DL'd the belkin driver, burned it to a cd, and ran the Belkin > installer. > > XP installed the device as com4, and I can copy the GPS sentences out of > my Garmin (with [ugh] Hyperterm). I have not verified if it will work > with my radio application, but it looks very promising now. > > Hope that helps, > > Tom in NM > > I've found its better to leave the filters out of the initial setup and after starting xp, plug in usb device and then use the devices menu on the vbox window to enable the device. Another tip is to completely uninstall the suse virtual box, including the kernel module, as yast won't make you do so, before installing VirtualBox-1.5.4_27034_openSUSE102-1.i586.rpm . It contains everything it needs. It has a comprehensive help system too. Dave -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
re: [opensuse] VirtualBox & XP-pro & serial madness
On Sat, 2008-01-12 at 09:29 -0600, Stevens wrote: > Tom: > > Read your post about VB, XP and serial port stuff. > > Do I understand you correctly that you have VB running > on a Linux host with XP guest AND it recognizes a usb device? > > If so, please give me some details on how to do that. I am > running opensuse 10.2, kernet 2.6.18. > > Thanks, > Fred > Fred, good morning, I'll have to think back thru all the attempts to figure out a step-by-step, it was a rather hacked way I went about it, since I had forgotten several admin things that always irked me with windoz! I imagine that your problem may be that the open-source release of VB does not include usb support _at all_. You need to get http://www.virtualbox.org/download/1.5.4/VirtualBox-1.5.4_27034_openSUSE102-1.i586.rpm the binary install for 10.2. I'm using 10.3 32-bit version, but others in their forum are using 10.2, so good luck. Remove the Oss version (but don't delete the XP guest files). Install VB closed-source, attach the original virtual files, insert the usb device, and launch VB. Do NOT launch the guest yet... If you get there, you will see a USB item in the VB details tab. (I think you _have_ to insert the usb device B4 launching VB.) In the USB dialog, there is a filter section. The small icons at the right indicate known usb devices, add the one you wish to use (in my case it is the Belkin converter dongle). I would add JUST the device of interest, not all of them. Next, start the XP guest, and do all the crap XP needs to use the device. I DL'd the belkin driver, burned it to a cd, and ran the Belkin installer. XP installed the device as com4, and I can copy the GPS sentences out of my Garmin (with [ugh] Hyperterm). I have not verified if it will work with my radio application, but it looks very promising now. Hope that helps, Tom in NM -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox & dos6.22 guest
On Wed, 09 Jan 2008 19:43:43 -0700, Tom Patton wrote: >My athlon FX 2800 cpu goes to 99% immediately when the dos guest boots. Known problem for ages :( DOS is agnostic of other possible CPU users and keeps the CPU busy by not emitting wait instructions to halt the CPU. It's up to the VM to handle that. Philipp -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox & dos6.22 guest
Did you try DOSBox (http://www.dosbox.com/) I found it to perform quite well. On 10/01/2008, Tom Patton <[EMAIL PROTECTED]> wrote: > A program I use at work is rather unstable in dosemu, and was hoping > this would be more efficient... -- Marcin Floryan http://marcin.floryan.pl/ Please consider the environment before printing this email. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox & dos6.22 guest
On Wed, 2008-01-09 at 19:43 -0700, Tom Patton wrote: > My athlon FX 2800 cpu goes to 99% immediately when the dos guest boots. > There are a ton of entries on their forum regarding high cpu usage with > several other guest systems, but no informative resolution at this > point. > > Is anyone here having luck with VB from the suse 10.3 dvd version > (1.5.2)? Several people over there have back-graded to v 1.4 to wait > out the problem. > > A program I use at work is rather unstable in dosemu, and was hoping > this would be more efficient... > > Tom in NM > > XP Pro seems to run just fine in vb, cpu load is holding at about 2.5% at idle, and responds to activity in a normal fashion. So this will probably get the job done nicely...I'll try it in my Thinkpad R40. FWIW, so far I like this vb much better than parallels...even tho I seldom need either one! Tom in NM -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
On Friday 04 January 2008 13:12:39 Ken Schneider wrote: > Phil Burness pecked at the keyboard and wrote: > > On Friday 04 January 2008 12:37:51 Ken Schneider wrote: > >> Phil Burness pecked at the keyboard and wrote: > > > > >>> On the web page it says use VBoxAddIF, I can't find this file (find \ > >>> -name VBoxAddIF -print)? should this be provided as part of the > >>> virtualbox installation? > >>> > >>> Thanks > >>> Phil > >> > >> Did you mis-type the command? You have find \ when it should be find /. > > > > Sorry Ken, > > No I just miss-typed in the e-mail, the actual command was find / - name > > etc. I did a rpm -ql virtualbox and the file is not in the rpm, so I > > don't have it. I'm using virtualbox 1.5.2 > > > > Phil > > I'm using the one downloaded from > http://www.virtualbox.org/wiki/Downloads and I see they have a newer > version available. > > -- > Ken Schneider > SuSe since Version 5.2, June 1998 Hi Ken, Thanks for the update.I uninstalled the one I got from opensuse and installed the version direct from virtual box and now I have it set up and running. - cool. Cheers Phil -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
Phil Burness pecked at the keyboard and wrote: > On Friday 04 January 2008 12:37:51 Ken Schneider wrote: >> Phil Burness pecked at the keyboard and wrote: >>> On the web page it says use VBoxAddIF, I can't find this file (find \ >>> -name VBoxAddIF -print)? should this be provided as part of the >>> virtualbox installation? >>> >>> Thanks >>> Phil >> Did you mis-type the command? You have find \ when it should be find /. >> > > Sorry Ken, > No I just miss-typed in the e-mail, the actual command was find / - name etc. > I did a rpm -ql virtualbox and the file is not in the rpm, so I don't have > it. > I'm using virtualbox 1.5.2 > > Phil I'm using the one downloaded from http://www.virtualbox.org/wiki/Downloads and I see they have a newer version available. -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
On Friday 04 January 2008 12:37:51 Ken Schneider wrote: > Phil Burness pecked at the keyboard and wrote: > > On Thursday 03 January 2008 13:54:32 Claes Bäckström wrote: > >> On Jan 2, 2008 9:17 PM, Phil Burness <[EMAIL PROTECTED]> wrote: > >>> On Wednesday 02 January 2008 19:57:45 Christopher Dick wrote: > - Original Message > From: Phil Burness <[EMAIL PROTECTED]> > To: opensuse@opensuse.org > Sent: Wednesday, January 2, 2008 1:37:47 PM > Subject: [opensuse] virtualbox networking > > > I have XP running in a virtualbox. I have NAT selected as the network > interface. From within windows XP on the virtual box I can see the > 'world' > using internet explorer. > running ipconfig in XP it shows my interface as having a network > address of > 10.0.2.15 and a default gateway address of 10.0.2.2 > running ifconfig on my linux box hosting the virtual box i have eth0 > with an > ip address of 192.168.1.69. My router to the internet is > 192.168.1.254. > > The questions are > a) How can I connect from other machines on the 192.168.1.xxx network > to the > windows machine and vice versa? > b) Can I open the connection to allow upnp connections? > > Thanks > Phil > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > In order to get other machines able to "see" the virtual machine, you > are going to need to change the networking within the VM from NAT to > Bridged mode. This will allow that XP VM to have an IP address within > the same subnet as the other hosts on your 192.168.x.x network. > > > > Christopher Dick > > > > > __ > _ _ Looking for last minute shopping deals? > Find them fast with Yahoo! Search. > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > >>> > >>> Thanks Christopher, > >>> Do I need an additional network card for the bridge? I read on the > >>> opensuse wiki a method that seemed to assume you have 2 ethernet > >>> cards... > >> > >> Check this out for Bridging for VirtualBox > >> > >> http://en.opensuse.org/Virtualbox_Network_Bridging > >> > >> Warm Regards, > >> Claes Backstrom > >> > >>> Phil > >>> > >>> -- > >>> To unsubscribe, e-mail: [EMAIL PROTECTED] > >>> For additional commands, e-mail: [EMAIL PROTECTED] > > > > On the web page it says use VBoxAddIF, I can't find this file (find \ > > -name VBoxAddIF -print)? should this be provided as part of the > > virtualbox installation? > > > > Thanks > > Phil > > Did you mis-type the command? You have find \ when it should be find /. > > -- > Ken Schneider > SuSe since Version 5.2, June 1998 Sorry Ken, No I just miss-typed in the e-mail, the actual command was find / - name etc. I did a rpm -ql virtualbox and the file is not in the rpm, so I don't have it. I'm using virtualbox 1.5.2 Phil -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
Phil Burness pecked at the keyboard and wrote: > On Thursday 03 January 2008 13:54:32 Claes Bäckström wrote: >> On Jan 2, 2008 9:17 PM, Phil Burness <[EMAIL PROTECTED]> wrote: >>> On Wednesday 02 January 2008 19:57:45 Christopher Dick wrote: - Original Message From: Phil Burness <[EMAIL PROTECTED]> To: opensuse@opensuse.org Sent: Wednesday, January 2, 2008 1:37:47 PM Subject: [opensuse] virtualbox networking I have XP running in a virtualbox. I have NAT selected as the network interface. From within windows XP on the virtual box I can see the 'world' using internet explorer. running ipconfig in XP it shows my interface as having a network address of 10.0.2.15 and a default gateway address of 10.0.2.2 running ifconfig on my linux box hosting the virtual box i have eth0 with an ip address of 192.168.1.69. My router to the internet is 192.168.1.254. The questions are a) How can I connect from other machines on the 192.168.1.xxx network to the windows machine and vice versa? b) Can I open the connection to allow upnp connections? Thanks Phil -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] In order to get other machines able to "see" the virtual machine, you are going to need to change the networking within the VM from NAT to Bridged mode. This will allow that XP VM to have an IP address within the same subnet as the other hosts on your 192.168.x.x network. Christopher Dick ___ _ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping >>> Thanks Christopher, >>> Do I need an additional network card for the bridge? I read on the >>> opensuse wiki a method that seemed to assume you have 2 ethernet cards... >> Check this out for Bridging for VirtualBox >> >> http://en.opensuse.org/Virtualbox_Network_Bridging >> >> Warm Regards, >> Claes Backstrom >> >>> Phil >>> >>> -- >>> To unsubscribe, e-mail: [EMAIL PROTECTED] >>> For additional commands, e-mail: [EMAIL PROTECTED] > > On the web page it says use VBoxAddIF, I can't find this file (find \ -name > VBoxAddIF -print)? should this be provided as part of the virtualbox > installation? > > Thanks > Phil Did you mis-type the command? You have find \ when it should be find /. -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
On Thursday 03 January 2008 13:54:32 Claes Bäckström wrote: > On Jan 2, 2008 9:17 PM, Phil Burness <[EMAIL PROTECTED]> wrote: > > On Wednesday 02 January 2008 19:57:45 Christopher Dick wrote: > > > - Original Message > > > From: Phil Burness <[EMAIL PROTECTED]> > > > To: opensuse@opensuse.org > > > Sent: Wednesday, January 2, 2008 1:37:47 PM > > > Subject: [opensuse] virtualbox networking > > > > > > > > > I have XP running in a virtualbox. I have NAT selected as the network > > > interface. From within windows XP on the virtual box I can see the > > > 'world' > > > using internet explorer. > > > running ipconfig in XP it shows my interface as having a network > > > address of > > > 10.0.2.15 and a default gateway address of 10.0.2.2 > > > running ifconfig on my linux box hosting the virtual box i have eth0 > > > with an > > > ip address of 192.168.1.69. My router to the internet is 192.168.1.254. > > > > > > The questions are > > > a) How can I connect from other machines on the 192.168.1.xxx network > > > to the > > > windows machine and vice versa? > > > b) Can I open the connection to allow upnp connections? > > > > > > Thanks > > > Phil > > > -- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > In order to get other machines able to "see" the virtual machine, you > > > are going to need to change the networking within the VM from NAT to > > > Bridged mode. This will allow that XP VM to have an IP address within > > > the same subnet as the other hosts on your 192.168.x.x network. > > > > > > > > > > > > Christopher Dick > > > > > > > > > > > > > > > ___ > > > _ Looking for last minute shopping deals? > > > Find them fast with Yahoo! Search. > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > Thanks Christopher, > > Do I need an additional network card for the bridge? I read on the > > opensuse wiki a method that seemed to assume you have 2 ethernet cards... > > Check this out for Bridging for VirtualBox > > http://en.opensuse.org/Virtualbox_Network_Bridging > > Warm Regards, > Claes Backstrom > > > Phil > > > > -- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] On the web page it says use VBoxAddIF, I can't find this file (find \ -name VBoxAddIF -print)? should this be provided as part of the virtualbox installation? Thanks Phil -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
- Original Message From: Stevens <[EMAIL PROTECTED]> To: opensuse@opensuse.org Sent: Thursday, January 3, 2008 8:09:52 AM Subject: Re: [opensuse] virtualbox networking Phil Burness asked "How can I connect from other machines on the 192.168.1.xxx network to the windows machine and vice versa?" and the responses basically said use bridging. OK, I read the opensuse bridging howto and it is pretty straightforward BUT what if I don't have either a second NIC or room for one? Wouldn't it possible to allow (through NAT, maybe?) access to the vb machine via the host's local IP address? If so, what would be the best way to set it up? Fred -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] You don't need a second NIC to configure bridging. When you set up bridging for VirtualBox, it creates a virtual NIC that is "attached" to the physical one used by the host OS. If your host OS has an eth0, your virtual NIC will be either eth0:0 or eth0:1. I can't remember which. The only reason you might want or need a second NIC would be if the guest OS is going to be hosting some application that is going to require heavy I/O that will saturate the ethernet interface and cause the network connection to become a serious bottleneck. Christopher Dick Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
Phil Burness asked "How can I connect from other machines on the 192.168.1.xxx network to the windows machine and vice versa?" and the responses basically said use bridging. OK, I read the opensuse bridging howto and it is pretty straightforward BUT what if I don't have either a second NIC or room for one? Wouldn't it possible to allow (through NAT, maybe?) access to the vb machine via the host's local IP address? If so, what would be the best way to set it up? Fred -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
On Jan 2, 2008 9:17 PM, Phil Burness <[EMAIL PROTECTED]> wrote: > > On Wednesday 02 January 2008 19:57:45 Christopher Dick wrote: > > - Original Message > > From: Phil Burness <[EMAIL PROTECTED]> > > To: opensuse@opensuse.org > > Sent: Wednesday, January 2, 2008 1:37:47 PM > > Subject: [opensuse] virtualbox networking > > > > > > I have XP running in a virtualbox. I have NAT selected as the network > > interface. From within windows XP on the virtual box I can see the > > 'world' > > using internet explorer. > > running ipconfig in XP it shows my interface as having a network > > address of > > 10.0.2.15 and a default gateway address of 10.0.2.2 > > running ifconfig on my linux box hosting the virtual box i have eth0 > > with an > > ip address of 192.168.1.69. My router to the internet is 192.168.1.254. > > > > The questions are > > a) How can I connect from other machines on the 192.168.1.xxx network > > to the > > windows machine and vice versa? > > b) Can I open the connection to allow upnp connections? > > > > Thanks > > Phil > > -- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > In order to get other machines able to "see" the virtual machine, you > > are going to need to change the networking within the VM from NAT to > > Bridged mode. This will allow that XP VM to have an IP address within > > the same subnet as the other hosts on your 192.168.x.x network. > > > > > > > > Christopher Dick > > > > > > > > > > ___ > >_ Looking for last minute shopping deals? > > Find them fast with Yahoo! Search. > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > Thanks Christopher, > Do I need an additional network card for the bridge? I read on the opensuse > wiki a method that seemed to assume you have 2 ethernet cards... Check this out for Bridging for VirtualBox http://en.opensuse.org/Virtualbox_Network_Bridging Warm Regards, Claes Backstrom > > Phil > > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
On Jan 3, 2008 4:17 AM, Phil Burness <[EMAIL PROTECTED]> wrote: > Thanks Christopher, > Do I need an additional network card for the bridge? I read on the opensuse > wiki a method that seemed to assume you have 2 ethernet cards... > > > Phil Hi, I don't use Virtualbox personally, but the same thing should apply - you don't need an additional NIC for the bridging to work (probably unless you have very heavy traffic). If you just want one address for the virtual machine (XP) and a different one for your host machine, you can use a single NIC; at least that is the case with VMware server. Hope that helps. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
On Wednesday 02 January 2008 19:57:45 Christopher Dick wrote: > - Original Message > From: Phil Burness <[EMAIL PROTECTED]> > To: opensuse@opensuse.org > Sent: Wednesday, January 2, 2008 1:37:47 PM > Subject: [opensuse] virtualbox networking > > > I have XP running in a virtualbox. I have NAT selected as the network > interface. From within windows XP on the virtual box I can see the > 'world' > using internet explorer. > running ipconfig in XP it shows my interface as having a network > address of > 10.0.2.15 and a default gateway address of 10.0.2.2 > running ifconfig on my linux box hosting the virtual box i have eth0 > with an > ip address of 192.168.1.69. My router to the internet is 192.168.1.254. > > The questions are > a) How can I connect from other machines on the 192.168.1.xxx network > to the > windows machine and vice versa? > b) Can I open the connection to allow upnp connections? > > Thanks > Phil > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > In order to get other machines able to "see" the virtual machine, you > are going to need to change the networking within the VM from NAT to > Bridged mode. This will allow that XP VM to have an IP address within > the same subnet as the other hosts on your 192.168.x.x network. > > > > Christopher Dick > > > > > ___ >_ Looking for last minute shopping deals? > Find them fast with Yahoo! Search. > http://tools.search.yahoo.com/newsearch/category.php?category=shopping Thanks Christopher, Do I need an additional network card for the bridge? I read on the opensuse wiki a method that seemed to assume you have 2 ethernet cards... Phil -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] virtualbox networking
- Original Message From: Phil Burness <[EMAIL PROTECTED]> To: opensuse@opensuse.org Sent: Wednesday, January 2, 2008 1:37:47 PM Subject: [opensuse] virtualbox networking I have XP running in a virtualbox. I have NAT selected as the network interface. From within windows XP on the virtual box I can see the 'world' using internet explorer. running ipconfig in XP it shows my interface as having a network address of 10.0.2.15 and a default gateway address of 10.0.2.2 running ifconfig on my linux box hosting the virtual box i have eth0 with an ip address of 192.168.1.69. My router to the internet is 192.168.1.254. The questions are a) How can I connect from other machines on the 192.168.1.xxx network to the windows machine and vice versa? b) Can I open the connection to allow upnp connections? Thanks Phil -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] In order to get other machines able to "see" the virtual machine, you are going to need to change the networking within the VM from NAT to Bridged mode. This will allow that XP VM to have an IP address within the same subnet as the other hosts on your 192.168.x.x network. Christopher Dick Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox.
Jerry Houston wrote: > Erik Jakobsen wrote: > >> The VirtualBox kernel driver is not accessible to the current user. Make >> sure that the user has write permissions for /dev/vboxdrv by adding them >> to the vboxusers groups. You will need to logout for the change to take >> effect.. >> >> How do I set the permissions ? >> >> > > I just used the YaST "Security and Users" module (which requires root > credentials) to add my non-privileged user account to the appropriate > group. It was easy, and worked fine. > > I'm sure you could do that from a root command shell as well, if you're > more comfortable with that, but I haven't needed to research the > commands to do that. > > Anyone know how to add a windows domain user to this group? I have attempted various methods using quotes, backslashes, spaces and none appear to work. Of course, this has to be done on cli as domain users are not shown under "Users" in YaST. Using 10.3 on windows AD authentication (because of work and I prefer Linux). Carl -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox.
Erik Jakobsen wrote: > > Is that the right place ? > > Oh my, I forgot to logout/login :-) Thanks for the help folks. -- Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the callsign OZ4KK http://www.urbakken.dk Registered Linux user #114875 with http://counter.li.org -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox.
Jerry Houston wrote: > > > I just used the YaST "Security and Users" module (which requires root > credentials) to add my non-privileged user account to the appropriate > group. It was easy, and worked fine. > > I'm sure you could do that from a root command shell as well, if you're > more comfortable with that, but I haven't needed to research the > commands to do that. > > Many thanks Jerry, but I need more informations about the details. Under "User and Group Administration" I have: erikja Erik Jakobsen 1000 uucp,dialout,video,users,vboxusers Is that the right place ? -- Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the callsign OZ4KK http://www.urbakken.dk Registered Linux user #114875 with http://counter.li.org -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox.
On Sunday 30 December 2007 18:21:36 Erik Jakobsen wrote: > Hi. > > I'm installing Virtualbox on my 10.3 system. > > When I start it, I get this information: > > The VirtualBox kernel driver is not accessible to the current user. Make > sure that the user has write permissions for /dev/vboxdrv by adding them > to the vboxusers groups. You will need to logout for the change to take > effect.. > > How do I set the permissions ? > > -- > Venlig hilsen - Best regards - Erik Jakobsen > Licensed HAM-RADIO with the callsign OZ4KK > http://www.urbakken.dk > Registered Linux user #114875 with http://counter.li.org Go into YaST , Security and Users, User Management. Select your user, and click edit (at the bottom). Open the 'Details' tab, and you will see a list of all the available groups on the right. Check vboxusers, press Accept, then Finish. Logout, then login again. It should now work, and I am not your father's brother! -- Bob openSUSE 10.3, Kernel 2.6.22.13-0.3-default, KDE 3.5.8 Intel Celeron 2.53GB, 2GB DDR RAM, nVidia GeForce 7600GS -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox.
Erik Jakobsen wrote: Hi. I'm installing Virtualbox on my 10.3 system. When I start it, I get this information: The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect.. How do I set the permissions ? in yast, users... jdd -- http://www.dodin.net -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox.
Erik Jakobsen wrote: > The VirtualBox kernel driver is not accessible to the current user. Make > sure that the user has write permissions for /dev/vboxdrv by adding them > to the vboxusers groups. You will need to logout for the change to take > effect.. > > How do I set the permissions ? > I just used the YaST "Security and Users" module (which requires root credentials) to add my non-privileged user account to the appropriate group. It was easy, and worked fine. I'm sure you could do that from a root command shell as well, if you're more comfortable with that, but I haven't needed to research the commands to do that. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [opensuse] Virtualbox OSE on 10.3
ginal Message - From: Claus Reheis <[EMAIL PROTECTED]> Sent: Mon, 10/8/2007 15:06 To: opensuse@opensuse.org Subject: Re: [opensuse] Virtualbox OSE on 10.3 Hi James! On Mon, 2007-10-08 at 20:33 +0200, Alexey Eremenko wrote: > On 10/8/07, James Bland <[EMAIL PROTECTED]> wrote: > > Has anyone else had problems installing VMs using Virtualbox OSE that cam > > with 10.3. I get the following error every time I start a VM. > > > > > > VirtualBox kernel driver not installed. The vboxdrv kernel module was > > either not loaded or /dev/vboxdrv was not created for some reason. Re-setup > > the kernel module by executing '/etc/init.d/vboxdrv setup' as root. > > VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). I had the same Problem! "modprobe vboxdrv" as root will fix the problem temporary! Via Yast>System>/etc/sysconfig Editor>System>Kernel>MODULES_LOADED_ON_BOOT you can add the module to be loaded at boot time! Greetings, Claus -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Thanks, Claus. That worked for me. Now just have to configure TUN for bridged netowkring on my laptop. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox OSE on 10.3
On Monday 08 October 2007 01:14:33 pm James Bland wrote: > Has anyone else had problems installing VMs using Virtualbox OSE that cam > with 10.3. I get the following error every time I start a VM. > > > VirtualBox kernel driver not installed. The vboxdrv kernel module was > either not loaded or /dev/vboxdrv was not created for some reason. Re-setup > the kernel module by executing '/etc/init.d/vboxdrv setup' as root. VBox > status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). > > > Result Code: > 0x80004005 > Component: > Console > Interface: > IConsole {1dea5c4b-0753-4193-b909-22330f64ec45} > > I can not find the script that is mentioned in the error. I've installed > and uninstalled the version that came with the DVD and on the 1-Click site > (virtualbox and default-kmp). > > Any ideas? 1-click install can be tricky. The VirtualBox is included in 10.3 official repositories and you can see article http://en.opensuse.org/Virtualbox for instructions. Then, as root, load the kernel driver: # modprobe vboxdrv and check that is loaded: # lsmod | grep vbox vboxdrv 1652352 0 Than also check is your user in vboxusers group as Alexey said. # groups users dialout vboxusers video -- Regards, Rajko. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox OSE on 10.3
Hi James! On Mon, 2007-10-08 at 20:33 +0200, Alexey Eremenko wrote: > On 10/8/07, James Bland <[EMAIL PROTECTED]> wrote: > > Has anyone else had problems installing VMs using Virtualbox OSE that cam > > with 10.3. I get the following error every time I start a VM. > > > > > > VirtualBox kernel driver not installed. The vboxdrv kernel module was > > either not loaded or /dev/vboxdrv was not created for some reason. Re-setup > > the kernel module by executing '/etc/init.d/vboxdrv setup' as root. > > VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). I had the same Problem! "modprobe vboxdrv" as root will fix the problem temporary! Via Yast>System>/etc/sysconfig Editor>System>Kernel>MODULES_LOADED_ON_BOOT you can add the module to be loaded at boot time! Greetings, Claus -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] Virtualbox OSE on 10.3
On 10/8/07, James Bland <[EMAIL PROTECTED]> wrote: > Has anyone else had problems installing VMs using Virtualbox OSE that cam > with 10.3. I get the following error every time I start a VM. > > > VirtualBox kernel driver not installed. The vboxdrv kernel module was either > not loaded or /dev/vboxdrv was not created for some reason. Re-setup the > kernel module by executing '/etc/init.d/vboxdrv setup' as root. > VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). > > > Result Code: > 0x80004005 > Component: > Console > Interface: > IConsole {1dea5c4b-0753-4193-b909-22330f64ec45} > > I can not find the script that is mentioned in the error. I've installed and > uninstalled the version that came with the DVD and on the 1-Click site > (virtualbox and default-kmp). > > Any ideas? > > Thanks, > > James You need to add your user to "vboxgroup" group (and restart) or run as root. It works. BTW: I wrote a whole guide about VirtualBox for openSUSE. Just install "lessons4lizards" doc package, and access it via "Start->Help". I hope you installed virtualbox kernel driver rpm. -- -Alexey Eremenko "Technologov" -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
Hugo Espresati Serrano wrote: > Sloan escribió: > >> Thanks for the tip, but... a small question... "restart"? "pc"? >> >> Since this is linux, and not that "pc" OS we all know so well, shouldn't >> it be enough to type: >> >> mount -oremount /proc/bus/usb >> >> ? >> >> >> > Well, it's another way, I haven't tried it =) > > Sorry for my bad english. > > "GNU/Linux. Because rebooting is only for installing hardware" jeje > That's the spirit! Joe -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
Sloan escribió: > Hugo Espresati Serrano wrote: > >> Stevens escribió: >> >> >>> On Monday 03 September 2007 20:40, Hans Linux wrote: >>> >>> >>> You r right! I reinstalled virtualbox using its binary and having windows xp running as guest now. Great software, much better than vmware which is not stable and slow one thing remain is USB. >>> I opted to not recompile the kernel and jump through all the hoops. >>> When I plug in a USB device, usually a flash drive, KDE sees it but >>> VirtualBox doesn't. I simply share the device with Samba and voila! >>> VirtualBox now has access to it. >>> >>> That solution works for me but might irritate the crap out of others >>> on this list, so YMMV. >>> >>> Fred >>> >>> >>> >> Just edit your fstab. Add *"#" *to your usb line, like this: >> >> #usbfs/proc/bus/usbusbfs >> noauto0 0 >> >> Then add this line: >> >> usbfs /proc/bus/usbusbfs defaults,devmode=666 0 0 >> >> Save, exit and restart your pc! ;-) >> >> >> > Thanks for the tip, but... a small question... "restart"? "pc"? > > Since this is linux, and not that "pc" OS we all know so well, shouldn't > it be enough to type: > > mount -oremount /proc/bus/usb > > ? > > > > Well, it's another way, I haven't tried it =) Sorry for my bad english. "GNU/Linux. Because rebooting is only for installing hardware" jeje -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
Hugo Espresati Serrano wrote: > Stevens escribió: > >> On Monday 03 September 2007 20:40, Hans Linux wrote: >> >> >>> You r right! I reinstalled virtualbox using its binary and having >>> windows xp running as guest now. Great software, much better than vmware >>> which is not stable and slow >>> >>> one thing remain is USB. >>> >>> >> I opted to not recompile the kernel and jump through all the hoops. >> When I plug in a USB device, usually a flash drive, KDE sees it but >> VirtualBox doesn't. I simply share the device with Samba and voila! >> VirtualBox now has access to it. >> >> That solution works for me but might irritate the crap out of others >> on this list, so YMMV. >> >> Fred >> >> > Just edit your fstab. Add *"#" *to your usb line, like this: > > #usbfs/proc/bus/usbusbfs > noauto0 0 > > Then add this line: > > usbfs /proc/bus/usbusbfs defaults,devmode=666 0 0 > > Save, exit and restart your pc! ;-) > > Thanks for the tip, but... a small question... "restart"? "pc"? Since this is linux, and not that "pc" OS we all know so well, shouldn't it be enough to type: mount -oremount /proc/bus/usb ? -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
Stevens escribió: > On Monday 03 September 2007 20:40, Hans Linux wrote: > >> You r right! I reinstalled virtualbox using its binary and having >> windows xp running as guest now. Great software, much better than vmware >> which is not stable and slow >> >> one thing remain is USB. >> > > I opted to not recompile the kernel and jump through all the hoops. > When I plug in a USB device, usually a flash drive, KDE sees it but > VirtualBox doesn't. I simply share the device with Samba and voila! > VirtualBox now has access to it. > > That solution works for me but might irritate the crap out of others > on this list, so YMMV. > > Fred > Just edit your fstab. Add *"#" *to your usb line, like this: #usbfs/proc/bus/usbusbfs noauto0 0 Then add this line: usbfs /proc/bus/usbusbfs defaults,devmode=666 0 0 Save, exit and restart your pc! ;-) I made this how-to: http://www.forosuse.org/forosuse/showthread.php?t=13508 Is in spanish. Sorry formy bad english! * * -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
On Monday 03 September 2007 20:40, Hans Linux wrote: > You r right! I reinstalled virtualbox using its binary and having > windows xp running as guest now. Great software, much better than vmware > which is not stable and slow > > one thing remain is USB. I opted to not recompile the kernel and jump through all the hoops. When I plug in a USB device, usually a flash drive, KDE sees it but VirtualBox doesn't. I simply share the device with Samba and voila! VirtualBox now has access to it. That solution works for me but might irritate the crap out of others on this list, so YMMV. Fred -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
On Monday 03 September 2007 20:40, Hans Linux wrote: > You r right! I reinstalled virtualbox using its binary and having > windows xp running as guest now. Great software, much better than vmware > which is not stable and slow :P > > one thing remain is USB. According to Alexey opensuse guide, we have to > uninstall virtualbox first, recompile the kernel (which version not > stated) and reinstall virtualbox. do i have to follow those step to > enable my usb? I am kind of reluctant to do that. I have my kernel > updated to 2.6.18.8-0.3-default already, having virtualbox running, and > now i hv to reinstall everything? The problem is kernel itself that has no USB support, so what you have to do is to configure kernel with USB support enabled, but than the kernel module vboxdrv has to be recompiled too. The current kernel is 2.6.18.8-0.5-default. You should update that and sources first. If you have problem to boot with default boot option, use new entry instead, and post that here. The rest should be explained, but right now I'm going to try this one: http://download.opensuse.org/repositories/ home:/dirkmueller/openSUSE_10.2/i586/ virtualbox-20070822-8.1.i586.rpm and virtualbox-kmp-default-20070822_2.6.18.2_34-8.1.i586.rpm Which so far works with small glitch, it doesn't list iso files and I had to paste and copy the name using another file manager. BTW, VirtualBox-kmp-default-1.4.0_2.6.18.2_34-20.1.i586.rpm has an error in post install script and the only way to get rid of it is rpm -e --noscripts VirtualBox-kmp-default but it can easily remove installed vboxdrv. -- Regards, Rajko. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
On Monday 03 September 2007 11:48, Rajko M. wrote: > > I installed it using opensuse10.2 repo. any idea what should i do? > > Besides Alexey's article, you may try as root to load: > modprobe vboxdrv > and see if it can start. No, it can't. Because there is no vboxdrv in rpm, not in http://download.opensuse.org/repositories/ Virtualization:/VirtualBox/openSUSE_10.2/i586/ VirtualBox-kmp-default-1.4.0_2.6.18.2_34-20.1.i586.rpm nor in http://download.opensuse.org/repositories/ Virtualization:/VirtualBox/openSUSE_10.2_Update/i586/ VirtualBox-kmp-default-1.4.0_2.6.18.8_0.3-20.1.i586.rpm So, instructions in Alexey's article, or openSUSE 10.3 Beta3 is your only hope to get vboxdrv any soon. -- Regards, Rajko. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
On Sunday 02 September 2007 10:02:49 pm Hans Linux wrote: > dear all > i m having problem with my VirtualBox on my opensuse 102. The error is : > > > VirtualBox kernel driver not installed. The vboxdrv kernel module was > either not loaded or /dev/vboxdrv was not created for some reason. ... > I try the command as suggested, but vboxdrv doesnt seem to be exist : > /etc/init.d/vboxdrv setup > -bash: /etc/init.d/vboxdrv: No such file or directory I got that too. > I installed it using opensuse10.2 repo. any idea what should i do? Besides Alexey's article, you may try as root to load: modprobe vboxdrv and see if it can start. -- Regards, Rajko. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox
You are extremely lucky :) Because I am the author of VirtualBox for openSUSE guide: http://forgeftp.novell.com/lfl/.html/virtualbox.html -- -Alexey Eremenko "Technologov" -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox]
Hi Hans, I too had the same error and I followed the instructions in the error message: execute '/etc/init.d/vboxdrv setup' as root. This patched the kernel and fixed it. - Brian Craft Jabber id: [EMAIL PROTECTED] AIM id: linuxman67 Yahoo IM id: bcraft67 Linux Counter id: 97873 Linux..the OS of Choice! On Mon, 2007-09-03 at 10:02 +0700, Hans Linux wrote: > dear all > i m having problem with my VirtualBox on my opensuse 102. The error is : > > > VirtualBox kernel driver not installed. The vboxdrv kernel module was > either not loaded or /dev/vboxdrv was not created for some reason. > Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. > VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). > > > Result Code: > 0x80004005 > Component: > Console > Interface: > IConsole {1dea5c4b-0753-4193-b909-22330f64ec45} > > > I try the command as suggested, but vboxdrv doesnt seem to be exist : > /etc/init.d/vboxdrv setup > -bash: /etc/init.d/vboxdrv: No such file or directory > > I installed it using opensuse10.2 repo. any idea what should i do? > > Thx for any help. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox error
Am Mittwoch, 29. August 2007 08:06 schrieb [EMAIL PROTECTED]: > I installed VirtualBox SOE v1.4 from opensuse repositories. But when I try > to run it, this error shows up : > > VirtualBox kernel driver not installed. The vboxdrv kernel module was > either not loaded or /dev/vboxdrv was not created for some reason. > Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as > root. > VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). > > > Result Code: > 0x80004005 > Component: > Console > Interface: > IConsole {1dea5c4b-0753-4193-b909-22330f64ec45} > > the re-setup suggested /etc/init.d/vboxdrv setup doesnot exist. What is > wrong then? Before that, I upgraded my kernel to 2.18.8.0-3. Is that > because of upgrade kernel??? Hello, it seems, that you have to compile the VBox-Module once again. Because of changing the kernel, there has to be newcompieled the vbox-modul. With regards Rainer -- >>> per aspera ad astra <<< -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox, Suse 10.2 and USB
On Wednesday May 9 2007 4:38:07 pm Stevens wrote: > To anyone who has been as disappointed as I about the inability of > VirtualBox to see USB flash drives, here is my solution - my hack - of the > problem. > > It is a pain in the butt but it works. > > Plug in the USB stick, let udev create the "disk" directory in /media. > "mount" will show it mounted as /dev/sda1, but that isn't important to this > exercise. > > Setup Samba server to share /media/disk > > konqueror file browser to /media, right click on "disk" and select "Share", > share it on the web and on the local network and with Samba > > Go into the XP guest on VirtualBox and "Show network computers" > > Anyway, the point is to use Samba to share the drive instead of beating > your head against the wall with kernel hacks that don't work, etc. > > It's ugly but it works. So what if I am sharing that drive to the world? If > I unplug the drive, it can't be accessed. Also, when I unplug the > drive, /media/disk disappears so I think that any security hole disappears > with it. > > YMMV. It works for me. > > Fred That's one way. Or you could just use the latest 2.6.18.8-0.3 kernel update for openSUSE 10.2 with the perl-bootloader module and be done with it. The insecure /proc/bus/usb file system has been reinstated. Works great and for VMware too! -- Stan -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox error: VERR_VM_DRIVER_NOT_ACCESSIBLE
On Sunday 11 February 2007 02:23, Marcus Hüwe wrote: > hmm. Did you do follow the README > (/usr/share/doc/packages/virtualbox-snapshot/README.SUSE)? > > Basically you have to do the following: > - install the rpm (it seems that you have already done this step) > - load the kernel module (i guess you did that too (modprobe vboxdrv)) > - add your user to the group "vboxusers" This is so interesting. Can it be installed on SLED10? -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 3:41pm up 7:08, 2.6.16.21-0.8-default GNU/Linux Let's use OpenOffice. http://www.openoffice.org pgpjx7cB3iY02.pgp Description: PGP signature
Re: [opensuse] VirtualBox : Failed to start VM execution (VERR_FILE_NOT_FOUND)
Have u tried the official version of VirtualBox v1.3.2 multi-distro? -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox error: VERR_VM_DRIVER_NOT_ACCESSIBLE
> (VERR_FILE_NOT_FOUND)" Many thanks Marcus My system is SuSE 10.2 Yes - I have done as : _ Quick start: - load the VirtualBox kernel-module: modprobe vboxdrv - now you can run /usr/bin/VirtualBox if you want to run VirtualBox as a normal user (which is reco have to add your user to the group: "vboxusers". This can be YaST2. ... Guess I had best uninstall & give it another best shot next week :) thanks -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox error: VERR_VM_DRIVER_NOT_ACCESSIBLE
On 2007-02-10 18:25:09 +, [EMAIL PROTECTED] wrote: > On Sat 10 Feb 2007 13:22, Marcus Hüwe wrote: > > I would suggest to create an extra udev rule for it. > > > > > now have error :"Failed to start VM execution > > > (VERR_FILE_NOT_FOUND)" > > > > Is this the only error message you get? How did you install > > virtualbox and how did you try to start it? > __ > > - Installed it, via your your very-own RPM . . . for which 'Thank you, > indeed' > > > I would suggest to create an extra udev rule for it. > _ > > How can I do that, please ? > If you installed my rpm such a rule is installed too. > >how did you try to start it? > __ > > - by pressing the "Start" button :) > hmm. Did you do follow the README (/usr/share/doc/packages/virtualbox-snapshot/README.SUSE)? Basically you have to do the following: - install the rpm (it seems that you have already done this step) - load the kernel module (i guess you did that too (modprobe vboxdrv)) - add your user to the group "vboxusers" Marcus -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox error: VERR_VM_DRIVER_NOT_ACCESSIBLE
On Sat 10 Feb 2007 13:22, Marcus Hüwe wrote: > I would suggest to create an extra udev rule for it. > > > now have error :"Failed to start VM execution > > (VERR_FILE_NOT_FOUND)" > > Is this the only error message you get? How did you install > virtualbox and how did you try to start it? __ - Installed it, via your your very-own RPM . . . for which 'Thank you, indeed' > I would suggest to create an extra udev rule for it. _ How can I do that, please ? >how did you try to start it? __ - by pressing the "Start" button :) best regards + thanks -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [opensuse] VirtualBox error: VERR_VM_DRIVER_NOT_ACCESSIBLE
On 2007-02-10 12:11:14 +, [EMAIL PROTECTED] wrote: > > have seen suggestion: > > "You need rw permissions on /dev/vboxdrv" > > > after fixing this, am not there yet :- > I would suggest to create an extra udev rule for it. > > now have error :"Failed to start VM execution (VERR_FILE_NOT_FOUND)" > Is this the only error message you get? How did you install virtualbox and how did you try to start it? Marcus -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]