Re: Progress on the incognito case

[mike wilson]

> On 10 August 2021 at 15:21 "Daniel J. Matyola"  wrote:
> 
> 
> ...bigger windows that are almost completely transparent so one does not miss 
> any scenery.

How desperately cunning.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Daniel J. Matyola]

I've never driven a train, but I had an experience that came close.

On one of our trips to Switzerland, we took the Glacier Express to Zermatt
and then local trains to Montreux.  My travel agent friend had connections
with German Rail, and booked me on the Crystal Panoramic Express from
Montreux.  The trains on this route are special trains with bigger windows
that are almost completely transparent so one does not miss any scenery.

https://www.trip.com/blog/there-is-a-journey-called-the-panoramic-train-journey/
https://en.wikipedia.org/wiki/GoldenPass_Line

Our tickets had the car and seat numbers on them;  I found what I thought
was the right car, but there were no seats to match our tickets.
Eventually, the conductor looked at our tickets and opened the front of the
car, which I had assumed was the engineer's compartment, where there were
four seats in the absolute front of the train, with nothing but glass
ahead, to the sides, and overhead.  (The engine was in the rear of the
train.

There we sat, mesmerized, as the train zig-zagged up the mountains, with
views of Lac leman, Mont Blanc, the Alps, the Jura, and one quaint Swiss
ski resort after another.  There is no rail to compare with Swiss Rail, not
even the Rocky Mountaineer.



Dan Matyola
*https://tinyurl.com/DJM-Pentax-Gallery
*



On Tue, Aug 10, 2021 at 2:12 AM Larry Colen  wrote:

>
>
> > On Aug 9, 2021, at 10:56 PM, John  wrote:
> >
> > It's not my job to drive the train,
> > The whistle I can't blow.
> > It's not my job to say how far
> > The train's supposed to go.
> > I'm not allowed to pull the brake,
> > Or even ring the bell.
> > But let the damn thing jump the track
> > And see who catches hell!
>
> I once recited (a version of) that poem to a friend, but as it turned out
> it was his job to drive the train.  He has even taken me for rides in the
> locomotive on a couple of occasions.  It was very fun.
>
>
> --
> Larry Colen
> l...@red4est.com
>
>
> --
> %(real_name)s Pentax-Discuss Mail List
> To unsubscribe send an email to pdml-le...@pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and
> follow the directions.
>
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Larry Colen]

> On Aug 9, 2021, at 10:56 PM, John  wrote:
> 
> It's not my job to drive the train,
> The whistle I can't blow.
> It's not my job to say how far
> The train's supposed to go.
> I'm not allowed to pull the brake,
> Or even ring the bell.
> But let the damn thing jump the track
> And see who catches hell!

I once recited (a version of) that poem to a friend, but as it turned out it 
was his job to drive the train.  He has even taken me for rides in the 
locomotive on a couple of occasions.  It was very fun.


--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[John]

It's not my job to drive the train,
The whistle I can't blow.
It's not my job to say how far
The train's supposed to go.
I'm not allowed to pull the brake,
Or even ring the bell.
But let the damn thing jump the track
And see who catches hell!

On 8/6/2021 13:28:56, Larry Colen wrote:




On Aug 6, 2021, at 7:56 AM, Ken Waller  wrote:

Looks like something an engineer would do. BTW - I R 1


Guilty as charged.

My definition of a natural born engineer is someone who will spend three hours 
figuring out how to do a 30 minute job in 20.


--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.




--
Science - Questions we may never find answers for.
Religion - Answers we must never question.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Larry Colen]

On the subject of going full engineering nerd, my brain keeps coming back to 
how to make one of these as a “real product”. I really ought to be wasting my 
time in a more productive manner.  Some of y’all might be amused by the thought 
experiment.

I’ve been doing more tweaking on the design ideas.The Pentax 645 mount has 
a diameter of about 61mm.  That means that you could make plates with p645 
mounting flanges, then make Pentax K-mount back caps that have 645 lens side 
flanges on them that would lock into the plates.  You could also make back caps 
that fit other lens mounts, Nikon etc. that also mounted into the plates.

I’m beginning to realize that you would want the mounting plates to be of 
different sizes and hole spacing depending on the diameter of the lenses and 
sunshades.  Probably half inch increments from 2.5”-4.5”.  You might also want 
some sort of way of elevating the lenses, maybe the equivalent of extension 
tubes, maybe something that is just a storage area under the squares (store 
filters?). There would also be a need for spacer plates to make up the 
difference when having mounting plates of different sizes adjacent to each 
other.  

It would ultimately also need ways of holding lenses on their sides, and 
ideally ways of making them pretty much drop ins for pelican cases.

--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Ken Waller]

Looks like something an engineer would do. BTW - I R 1

-Original Message-
From: Pentax-Discuss Mail List 
Sent: Aug 6, 2021 4:17 AM
To: Pentax-Discuss Mail List 
Subject: Progress on the incognito case

Ive made progress on my incognito lens case. Im not completely 
thrilled with the layout but it seems to be pretty close to workable. Id 
like to improve the mounting of the tray for the small primes so there is more 
functional storage underneath it.

https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA

I should figure out how to make dividers, and maybe put some soft foam on the 
underside of the lid to help keep things in place.

What Id really like to do is 3-d print back caps that had tabs on the 
outside, and basically make bayonet mounts for them, so that I could latch them 
into the hard case, but when I wanted to put them in a smaller camera bag, 
Id take out the lens, back cap and all, and just go with that.

--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.


Ken Waller
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Alan C]

The famous, largely unschooled, English Canal Engineer, James Brindley, 
designed his canal systems mentally while sitting in a darkened room. 
His famous Bridgewater Canal featured aqueducts over rivers which 
ultimately ended the monopoly of the river boat transporters in the 
Birmingham area. Then came the railways which put paid to the narrowboat 
traders but the canals live on for recreational purposes!


Alan C

On 06-Aug-21 07:28 PM, Larry Colen wrote:



On Aug 6, 2021, at 7:56 AM, Ken Waller  wrote:

Looks like something an engineer would do. BTW - I R 1

Guilty as charged.

My definition of a natural born engineer is someone who will spend three hours 
figuring out how to do a 30 minute job in 20.


--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Larry Colen]

> On Aug 6, 2021, at 7:49 AM, Paul Sorenson  wrote:
> 
> How about this...use a bayonet body cap mounted bayonet up in the case and 
> use a double rear lens cap on the lens.  Lens fits into one side of the 
> double cap and the other side captures the bayonet body cap.  Will probably 
> cost about $20/lens but might be cheaper and certainly more available than 
> something 3D printed.

That’s an idea, though if I were doing that I could glue a body cap to the back 
side of the back cap, and that way I could latch the lenses in with either the 
custom cap, or directly without the custom cap.

It turns out that 3-d printing isn’t too expensive if you have a friend that 
can do it for you.  


--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Larry Colen]

> On Aug 6, 2021, at 7:56 AM, Ken Waller  wrote:
> 
> Looks like something an engineer would do. BTW - I R 1

Guilty as charged.

My definition of a natural born engineer is someone who will spend three hours 
figuring out how to do a 30 minute job in 20. 


--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: Progress on the incognito case

[Paul Sorenson]

How about this...use a bayonet body cap mounted bayonet up in the case 
and use a double rear lens cap on the lens.  Lens fits into one side of 
the double cap and the other side captures the bayonet body cap.  Will 
probably cost about $20/lens but might be cheaper and certainly more 
available than something 3D printed.


-p


On 8/6/2021 3:17 AM, Larry Colen wrote:

What I’d really like to do is 3-d print back caps that had tabs on the outside, 
and basically make bayonet mounts for them, so that I could latch them into the 
hard case, but when I wanted to put them in a smaller camera bag, I’d take out 
the lens, back cap and all, and just go with that.

--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.


--
Paul Sorenson
Studio1941

Sooner or later "different" scares people.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Progress on the incognito case

[Larry Colen]

I’ve made progress on my incognito lens case.  I’m not completely thrilled with 
the layout but it seems to be pretty close to workable.  I’d like to improve 
the mounting of the tray for the small primes so there is more functional 
storage underneath it.

https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA

I should figure out how to make dividers, and maybe put some soft foam on the 
underside of the lid to help keep things in place.

What I’d really like to do is 3-d print back caps that had tabs on the outside, 
and basically make bayonet mounts for them, so that I could latch them into the 
hard case, but when I wanted to put them in a smaller camera bag, I’d take out 
the lens, back cap and all, and just go with that.   

--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Paul Stenquist]

I dont like lens bags or lens cases. They get in the way. I use pelican camera 
cases with soft dividers. Ultimate protection and convenience.

Paul

> On Apr 22, 2021, at 7:48 PM, John Francis  wrote:
> 
> On Thu, Apr 22, 2021 at 07:36:14PM -0400, John Francis wrote:
>>> On Thu, Apr 22, 2021 at 08:09:30PM +0200, Toine wrote:
>>> Maybe some cheap neoprene lens bags which allows you to fill the space
>>> to the max
>>> https://www.aliexpress.com/item/4000419580349.html?spm=a2g0s.9042311.0.0.27424c4deB8FUy
>> 
>> Apparently these are only for Canon, Nikon, or Sony :-)
>> 
>> Mind you, they come in interesting colors:  S, M, L, or XL.
> 
> 
> To be a little more helpful - they also offer drawstring lens bags:
> 
> https://www.aliexpress.com/item/4001026746433.html
> --
> %(real_name)s Pentax-Discuss Mail List
> To unsubscribe send an email to pdml-le...@pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[John Francis]

On Thu, Apr 22, 2021 at 07:36:14PM -0400, John Francis wrote:
> On Thu, Apr 22, 2021 at 08:09:30PM +0200, Toine wrote:
> > Maybe some cheap neoprene lens bags which allows you to fill the space
> > to the max
> > https://www.aliexpress.com/item/4000419580349.html?spm=a2g0s.9042311.0.0.27424c4deB8FUy
> 
> Apparently these are only for Canon, Nikon, or Sony :-)
> 
> Mind you, they come in interesting colors:  S, M, L, or XL.


To be a little more helpful - they also offer drawstring lens bags:

https://www.aliexpress.com/item/4001026746433.html
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Ken Waller]

When I was traveling for business, I had a Halliburton case that had thick foam 
inserts that I cut out to receive and isolate lenses and bodies. Worked well 
for me for over 18 years - a lot of rough handling and no issues with damage. I 
believe Halliburton use to offer replacement inserts for sale - you might try 
an auto upholsterer.


-Original Message-
>From: Larry Colen 
>Sent: Apr 21, 2021 11:04 PM
>To: Pentax-Discuss Mail List 
>Subject: Re: incognito case
>
>Since folks couldn’t see the photos on google, I used a real camera and posted 
>some on flickr
>https://www.flickr.com/photos/ellarsee/albums/72157718988705093
>
>I checked out the glasses box at Uhaul, it was awfully flimsy, and for $16 I 
>could make something a lot better if it came down to that.
>
>The first bit of foam I tried didn’t work so well, too much dust. I also don’t 
>have hole saws that are both wide and deep enough for cut a 6” piece of foam.  
>  
>
>I’ll continue poking at different options.
>
>
>
>> On Apr 19, 2021, at 11:38 PM, Larry Colen  wrote:
>> 
>> The ice chest for my incognito case arrived today.  I just prototyped some 
>> dividers out of the box it came in.
>> 
>> I think that it definitely has promise. I need to figure out something 
>> better for the dividers (if I had a 3d printer that might work, but foam and 
>> a hole saw might be better.
>> 
>> Google photos implies that their photos are available to anyone, but the way 
>> they specify you don’t need to run google photos you might need a google 
>> account to see them.
>> 
>> https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA
>> 
>> It’s about the size of a pelican case, and about 1/8 the cost.
>> 
>> I’m interested in any feasible suggestions for making dividers that’ll hold 
>> and cushion the lenses.
>> 
>> Here’s the cooler I made it out of, about $25 with tax etc.
>> 
>> https://www.amazon.com/gp/product/B002BMEEV6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8=1
>> 
>> 
>> 
>> --
>> Larry Colen
>> l...@red4est.com
>> 
>> 
>> --
>> %(real_name)s Pentax-Discuss Mail List
>> To unsubscribe send an email to pdml-le...@pdml.net
>> to UNSUBSCRIBE from the PDML, please visit the link directly above and 
>> follow the directions.
>> 
>
>--
>Larry Colen
>l...@red4est.com
>
>
>--
>%(real_name)s Pentax-Discuss Mail List
>To unsubscribe send an email to pdml-le...@pdml.net
>to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
>the directions.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[John Francis]

On Thu, Apr 22, 2021 at 08:09:30PM +0200, Toine wrote:
> Maybe some cheap neoprene lens bags which allows you to fill the space
> to the max
> https://www.aliexpress.com/item/4000419580349.html?spm=a2g0s.9042311.0.0.27424c4deB8FUy

Apparently these are only for Canon, Nikon, or Sony :-)

Mind you, they come in interesting colors:  S, M, L, or XL.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Toine]

or camera bag inserts

On Thu, 22 Apr 2021 at 20:09, Toine  wrote:
>
> Maybe some cheap neoprene lens bags which allows you to fill the space
> to the max
> https://www.aliexpress.com/item/4000419580349.html?spm=a2g0s.9042311.0.0.27424c4deB8FUy
>
> On Thu, 22 Apr 2021 at 19:42, Larry Colen  wrote:
> >
> >
> >
> > > On Apr 22, 2021, at 10:35 AM, John Francis  wrote:
> > >
> > > On Wed, Apr 21, 2021 at 08:04:59PM -0700, Larry Colen wrote:
> > >> Since folks couldn???t see the photos on google, I used a real camera 
> > >> and posted some on flickr
> > >> https://www.flickr.com/photos/ellarsee/albums/72157718988705093
> > >>
> > >> I checked out the glasses box at Uhaul, it was awfully flimsy, and for 
> > >> $16 I could make something a lot better if it came down to that.
> > >>
> > >> The first bit of foam I tried didn???t work so well, too much dust. I 
> > >> also don???t have hole saws that are both wide and deep enough for cut a 
> > >> 6??? piece of foam.
> > >>
> > >> I???ll continue poking at different options.
> > >
> > > Why not do what Pelican do?
> > >
> > > Get a piece of strong material/fabric/whatever, form a pocket/envelope 
> > > from it,
> > > fill it with some sort of padding material, and sew or glue it shut.
> > > (I'm sure you know _somebody_ with a commercial-grade sewing machine!)
> > >
> > > For extra credit add flaps with Velcro fasteners and make movable 
> > > dividers.
> >
> > I’ll probably end up going that way, but I was hoping that there was an 
> > easier solution.  Between the home refi falling through, mom dying, losing 
> > my job, problems with unemployment, the current crop of home repairs, my 
> > laptop computer crapping out, it looking like I’ll need to drive back to 
> > Oregon for my second vaccine jab next week, and a few other less pressing 
> > issues, I had really hoped that someone would be able to point to something 
> > like a $3 plastic tray at bed bath and beyond that would work perfectly.
> >
> >
> > --
> > Larry Colen
> > l...@red4est.com
> >
> >
> > --
> > %(real_name)s Pentax-Discuss Mail List
> > To unsubscribe send an email to pdml-le...@pdml.net
> > to UNSUBSCRIBE from the PDML, please visit the link directly above and 
> > follow the directions.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Toine]

Maybe some cheap neoprene lens bags which allows you to fill the space
to the max
https://www.aliexpress.com/item/4000419580349.html?spm=a2g0s.9042311.0.0.27424c4deB8FUy

On Thu, 22 Apr 2021 at 19:42, Larry Colen  wrote:
>
>
>
> > On Apr 22, 2021, at 10:35 AM, John Francis  wrote:
> >
> > On Wed, Apr 21, 2021 at 08:04:59PM -0700, Larry Colen wrote:
> >> Since folks couldn???t see the photos on google, I used a real camera and 
> >> posted some on flickr
> >> https://www.flickr.com/photos/ellarsee/albums/72157718988705093
> >>
> >> I checked out the glasses box at Uhaul, it was awfully flimsy, and for $16 
> >> I could make something a lot better if it came down to that.
> >>
> >> The first bit of foam I tried didn???t work so well, too much dust. I also 
> >> don???t have hole saws that are both wide and deep enough for cut a 6??? 
> >> piece of foam.
> >>
> >> I???ll continue poking at different options.
> >
> > Why not do what Pelican do?
> >
> > Get a piece of strong material/fabric/whatever, form a pocket/envelope from 
> > it,
> > fill it with some sort of padding material, and sew or glue it shut.
> > (I'm sure you know _somebody_ with a commercial-grade sewing machine!)
> >
> > For extra credit add flaps with Velcro fasteners and make movable dividers.
>
> I’ll probably end up going that way, but I was hoping that there was an 
> easier solution.  Between the home refi falling through, mom dying, losing my 
> job, problems with unemployment, the current crop of home repairs, my laptop 
> computer crapping out, it looking like I’ll need to drive back to Oregon for 
> my second vaccine jab next week, and a few other less pressing issues, I had 
> really hoped that someone would be able to point to something like a $3 
> plastic tray at bed bath and beyond that would work perfectly.
>
>
> --
> Larry Colen
> l...@red4est.com
>
>
> --
> %(real_name)s Pentax-Discuss Mail List
> To unsubscribe send an email to pdml-le...@pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Larry Colen]

> On Apr 22, 2021, at 10:35 AM, John Francis  wrote:
> 
> On Wed, Apr 21, 2021 at 08:04:59PM -0700, Larry Colen wrote:
>> Since folks couldn???t see the photos on google, I used a real camera and 
>> posted some on flickr
>> https://www.flickr.com/photos/ellarsee/albums/72157718988705093
>> 
>> I checked out the glasses box at Uhaul, it was awfully flimsy, and for $16 I 
>> could make something a lot better if it came down to that.
>> 
>> The first bit of foam I tried didn???t work so well, too much dust. I also 
>> don???t have hole saws that are both wide and deep enough for cut a 6??? 
>> piece of foam.
>> 
>> I???ll continue poking at different options.
> 
> Why not do what Pelican do?
> 
> Get a piece of strong material/fabric/whatever, form a pocket/envelope from 
> it,
> fill it with some sort of padding material, and sew or glue it shut.
> (I'm sure you know _somebody_ with a commercial-grade sewing machine!)
> 
> For extra credit add flaps with Velcro fasteners and make movable dividers.

I’ll probably end up going that way, but I was hoping that there was an easier 
solution.  Between the home refi falling through, mom dying, losing my job, 
problems with unemployment, the current crop of home repairs, my laptop 
computer crapping out, it looking like I’ll need to drive back to Oregon for my 
second vaccine jab next week, and a few other less pressing issues, I had 
really hoped that someone would be able to point to something like a $3 plastic 
tray at bed bath and beyond that would work perfectly.  


--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[John Francis]

On Wed, Apr 21, 2021 at 08:04:59PM -0700, Larry Colen wrote:
> Since folks couldn???t see the photos on google, I used a real camera and 
> posted some on flickr
> https://www.flickr.com/photos/ellarsee/albums/72157718988705093
> 
> I checked out the glasses box at Uhaul, it was awfully flimsy, and for $16 I 
> could make something a lot better if it came down to that.
> 
> The first bit of foam I tried didn???t work so well, too much dust. I also 
> don???t have hole saws that are both wide and deep enough for cut a 6??? 
> piece of foam.
> 
> I???ll continue poking at different options.

Why not do what Pelican do?

Get a piece of strong material/fabric/whatever, form a pocket/envelope from it,
fill it with some sort of padding material, and sew or glue it shut.
(I'm sure you know _somebody_ with a commercial-grade sewing machine!)

For extra credit add flaps with Velcro fasteners and make movable dividers.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Larry Colen]

Since folks couldn’t see the photos on google, I used a real camera and posted 
some on flickr
https://www.flickr.com/photos/ellarsee/albums/72157718988705093

I checked out the glasses box at Uhaul, it was awfully flimsy, and for $16 I 
could make something a lot better if it came down to that.

The first bit of foam I tried didn’t work so well, too much dust. I also don’t 
have hole saws that are both wide and deep enough for cut a 6” piece of foam.   
 

I’ll continue poking at different options.



> On Apr 19, 2021, at 11:38 PM, Larry Colen  wrote:
> 
> The ice chest for my incognito case arrived today.  I just prototyped some 
> dividers out of the box it came in.
> 
> I think that it definitely has promise. I need to figure out something better 
> for the dividers (if I had a 3d printer that might work, but foam and a hole 
> saw might be better.
> 
> Google photos implies that their photos are available to anyone, but the way 
> they specify you don’t need to run google photos you might need a google 
> account to see them.
> 
> https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA
> 
> It’s about the size of a pelican case, and about 1/8 the cost.
> 
> I’m interested in any feasible suggestions for making dividers that’ll hold 
> and cushion the lenses.
> 
> Here’s the cooler I made it out of, about $25 with tax etc.
> 
> https://www.amazon.com/gp/product/B002BMEEV6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8=1
> 
> 
> 
> --
> Larry Colen
> l...@red4est.com
> 
> 
> --
> %(real_name)s Pentax-Discuss Mail List
> To unsubscribe send an email to pdml-le...@pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.
> 

--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Stanley Halpin]

U-Haul sells boxes or many varieties. One version is designed to store/ship 
glassware. Another version is designed to ship wine. You can buy the glassware 
inserts separately, I am not sure about the wine inserts. But it might be worth 
a trip to your local U-Haul to check it out…

https://www.uhaul.com/MovingSupplies/Boxes/ 
<https://www.uhaul.com/MovingSupplies/Boxes/>

Stan

> On Apr 20, 2021, at 2:38 AM, Larry Colen  wrote:
> 
> The ice chest for my incognito case arrived today.  I just prototyped some 
> dividers out of the box it came in.
> 
> I think that it definitely has promise. I need to figure out something better 
> for the dividers (if I had a 3d printer that might work, but foam and a hole 
> saw might be better.
> 
> Google photos implies that their photos are available to anyone, but the way 
> they specify you don’t need to run google photos you might need a google 
> account to see them.
> 
> https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA
> 
> It’s about the size of a pelican case, and about 1/8 the cost.
> 
> I’m interested in any feasible suggestions for making dividers that’ll hold 
> and cushion the lenses.
> 
> Here’s the cooler I made it out of, about $25 with tax etc.
> 
> https://www.amazon.com/gp/product/B002BMEEV6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8=1
> 
> 
> 
> --
> Larry Colen
> l...@red4est.com
> 
> 
> --
> %(real_name)s Pentax-Discuss Mail List
> To unsubscribe send an email to pdml-le...@pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.

--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[John]

On 4/20/2021 02:59:58, mike wilson wrote:



On 20 April 2021 at 07:38 Larry Colen  wrote:


The ice chest for my incognito case arrived today.  I just prototyped some 
dividers out of the box it came in.

I think that it definitely has promise. I need to figure out something better 
for the dividers (if I had a 3d printer that might work, but foam and a hole 
saw might be better.

Google photos implies that their photos are available to anyone, but the way 
they specify you don’t need to run google photos you might need a google 
account to see them.

https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA


Even if you already have an account and are signed in, it wants you to sign in again to 
"prove that it's you."  Goodbye.



You got further than I did. The link doesn't do anything for me (literally - 
click it and nothing happens).



--
Science - Questions we may never find answers for.
Religion - Answers we must never question.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[P. J. Alling]

You can buy closed foam with precuts like this:

https://www.amazon.com/Pick-Pluck-Pre-Cubed-foam-bottom/dp/B00ZFTEM0U/ref=sr_1_5?dchild=1=foam+inserts+for+cases=1618926761=8-5

On 4/20/2021 2:38 AM, Larry Colen wrote:

The ice chest for my incognito case arrived today.  I just prototyped some 
dividers out of the box it came in.

I think that it definitely has promise. I need to figure out something better 
for the dividers (if I had a 3d printer that might work, but foam and a hole 
saw might be better.

Google photos implies that their photos are available to anyone, but the way 
they specify you don’t need to run google photos you might need a google 
account to see them.

https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA

It’s about the size of a pelican case, and about 1/8 the cost.

I’m interested in any feasible suggestions for making dividers that’ll hold and 
cushion the lenses.

Here’s the cooler I made it out of, about $25 with tax etc.

https://www.amazon.com/gp/product/B002BMEEV6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8=1



--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.


--
Any idiot can shoot with a Canon, Nikon, or Sony, it takes a special kind of 
idiot to use a Pentax.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[mike wilson]

> On 20 April 2021 at 07:38 Larry Colen  wrote:
> 
> 
> The ice chest for my incognito case arrived today.  I just prototyped some 
> dividers out of the box it came in.
> 
> I think that it definitely has promise. I need to figure out something better 
> for the dividers (if I had a 3d printer that might work, but foam and a hole 
> saw might be better.
> 
> Google photos implies that their photos are available to anyone, but the way 
> they specify you don’t need to run google photos you might need a google 
> account to see them.
> 
> https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA

Even if you already have an account and are signed in, it wants you to sign in 
again to "prove that it's you."  Goodbye.

> 
> It’s about the size of a pelican case, and about 1/8 the cost.
> 
> I’m interested in any feasible suggestions for making dividers that’ll hold 
> and cushion the lenses.
> 
> Here’s the cooler I made it out of, about $25 with tax etc.
> 
> https://www.amazon.com/gp/product/B002BMEEV6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8=1
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[Larry Colen]

> On Apr 19, 2021, at 11:46 PM, John Francis  wrote:
> 
> On Mon, Apr 19, 2021 at 11:38:42PM -0700, Larry Colen wrote:
>> The ice chest for my incognito case arrived today.  I just prototyped some 
>> dividers out of the box it came in.
>> 
>> I???m interested in any feasible suggestions for making dividers that???ll 
>> hold and cushion the lenses.
> 
> For a lot of lenses I'd guess that one of the insulated holders for beer cans 
> would work pretty well.

I actually collected a few of those for pretty much exactly that purpose.

My ideal would be a monolithic piece that held everything.  Or maybe three 
trays for lenses of different diameter ranges. 

--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Re: incognito case

[John Francis]

On Mon, Apr 19, 2021 at 11:38:42PM -0700, Larry Colen wrote:
> The ice chest for my incognito case arrived today.  I just prototyped some 
> dividers out of the box it came in.
> 
> I???m interested in any feasible suggestions for making dividers that???ll 
> hold and cushion the lenses.

For a lot of lenses I'd guess that one of the insulated holders for beer cans 
would work pretty well.
--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

incognito case

[Larry Colen]

The ice chest for my incognito case arrived today.  I just prototyped some 
dividers out of the box it came in.

I think that it definitely has promise. I need to figure out something better 
for the dividers (if I had a 3d printer that might work, but foam and a hole 
saw might be better.

Google photos implies that their photos are available to anyone, but the way 
they specify you don’t need to run google photos you might need a google 
account to see them.

https://photos.app.goo.gl/4xx9sQvo2FUeL6kNA

It’s about the size of a pelican case, and about 1/8 the cost.

I’m interested in any feasible suggestions for making dividers that’ll hold and 
cushion the lenses.

Here’s the cooler I made it out of, about $25 with tax etc.

https://www.amazon.com/gp/product/B002BMEEV6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8=1



--
Larry Colen
l...@red4est.com


--
%(real_name)s Pentax-Discuss Mail List
To unsubscribe send an email to pdml-le...@pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.