Re: [qmailtoaster] QMT DNS services - a call for participation
please, for the final time, remove me from this and all other emails or you
leave me no choice but to report it as spam
best
john
From: Délsio Cabá
Sent: Saturday, March 17, 2012 3:54 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] QMT DNS services - a call for participation
Hi,
I have tested the transfer :
Testing transfer of slave zone from 71.40.159.226 ..
.. from 71.40.159.226 : Completed OK
Test transfer successfully fetched 0 records from at least one nameserver.
Actual transfers by BIND should also succeed.
That was the reply from Webmin BIND interface. Is that normal? No records
actually were transferred
Regards
On 17 March 2012 16:15, Dan McAllister q...@it4soho.com wrote:
On 3/17/2012 12:05 AM, Délsio Cabá wrote:
Hi,
I am in Southern Africa, Mozambique.
You can set my server as another slave.
My nameserver is ns01.mozdesigners.com and IP address is 212.96.25.202.
So I have in BIND:
zone qmailtoaster.com {
type slave;
masters {
71.40.159.226;
};
file /var/named/slaves/qmailtoaster.com.hosts;
};
Please confirm
Regards
You appear to be setup properly... just a few moments ago I added your IP
(above) to the list of those approved for zone transfers. Please test at your
convenience.
I have also added the A record for your server as dns-af1.qmailtoaster.com.
Once we confirm that you're transferring and serving the domain properly, we'll
activate your NS record on the domain.
Thank you VERY MUCH for volunteering your support of the QMT project...
You're our first volunteer from Africa! Welcome aboard!
Dan McAllister
--
IT4SOHO, LLC
PO Box 507
St. Petersburg, FL 33731-0507
CALL TOLL FREE:
877-IT4SOHO
We have support plans for QMail!
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4876 - Release Date: 03/17/12
Re: [qmailtoaster] QMT DNS services - a call for participation
please send me this detail again as I have received too many emails to trawl
through them all
thanks
john
From: Maxwell Smart
Sent: Saturday, March 17, 2012 4:11 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] QMT DNS services - a call for participation
John,
Reading for the win. You have been instructed on how to remove yourself from
the list. Please follow instructions and unsubscribe.
CJ
On 03/17/2012 09:04 AM, John O'Reilly wrote:
please, for the final time, remove me from this and all other emails or you
leave me no choice but to report it as spam
best
john
From: Délsio Cabá
Sent: Saturday, March 17, 2012 3:54 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] QMT DNS services - a call for participation
Hi,
I have tested the transfer :
Testing transfer of slave zone from 71.40.159.226 ..
.. from 71.40.159.226 : Completed OK
Test transfer successfully fetched 0 records from at least one nameserver.
Actual transfers by BIND should also succeed.
That was the reply from Webmin BIND interface. Is that normal? No records
actually were transferred
Regards
On 17 March 2012 16:15, Dan McAllister q...@it4soho.com wrote:
On 3/17/2012 12:05 AM, Délsio Cabá wrote:
Hi,
I am in Southern Africa, Mozambique.
You can set my server as another slave.
My nameserver is ns01.mozdesigners.com and IP address is 212.96.25.202.
So I have in BIND:
zone qmailtoaster.com {
type slave;
masters {
71.40.159.226;
};
file /var/named/slaves/qmailtoaster.com.hosts;
};
Please confirm
Regards
You appear to be setup properly... just a few moments ago I added your IP
(above) to the list of those approved for zone transfers. Please test at your
convenience.
I have also added the A record for your server as dns-af1.qmailtoaster.com.
Once we confirm that you're transferring and serving the domain properly, we'll
activate your NS record on the domain.
Thank you VERY MUCH for volunteering your support of the QMT project...
You're our first volunteer from Africa! Welcome aboard!
Dan McAllister
--
IT4SOHO, LLC
PO Box 507
St. Petersburg, FL 33731-0507
CALL TOLL FREE:
877-IT4SOHO
We have support plans for QMail!
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4876 - Release Date: 03/17/12
--
Cecil Yother, Jr. cj
cj's
2318 Clement Ave
Alameda, CA 94501
tel 510.865.2787
http://yother.com
Check out the new Volvo classified resource http://www.volvoclassified.comNo
virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4876 - Release Date: 03/17/12
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster
support and installations. If you need professional help with your setup,
contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages. To
unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For
additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: allowing chkuser in qmail
Please remove me from your email list as I’m not part of this repair thanks john From: rajeshrudramani Sent: Tuesday, March 13, 2012 10:50 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: allowing chkuser in qmail Hi, Thanks its working. Regards, Rajesh On Tue, Mar 13, 2012 at 4:15 PM, Eric Shubert e...@shubes.net wrote: On 03/13/2012 03:28 AM, rajeshrudramani wrote: Hi, When recompile the below file getting error |vi /usr/src/redhat/BUILD/qmail-1.03/chkuser_settings.h | define CHKUSER_ALLOW_SENDER_CHAR_3 '/' RPM build errors: Bad exit status from /var/tmp/rpm-tmp.29293 (%build) Regards, Rajesh Should be: #define You need the hash as the first character. This is C, not bash. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- Regards, RAJESH.R, VPSADMIN, WEBINDIA INTERNET SERVICES PVT LTD. No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1913 / Virus Database: 2114/4868 - Release Date: 03/13/12
Re: [qmailtoaster] Re: allowing chkuser in qmail
please remove me from this email list as I'm not part of this repair thanks john -Original Message- From: Eric Shubert Sent: Tuesday, March 13, 2012 10:45 AM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: allowing chkuser in qmail On 03/13/2012 03:28 AM, rajeshrudramani wrote: Hi, When recompile the below file getting error |vi /usr/src/redhat/BUILD/qmail-1.03/chkuser_settings.h | define CHKUSER_ALLOW_SENDER_CHAR_3 '/' RPM build errors: Bad exit status from /var/tmp/rpm-tmp.29293 (%build) Regards, Rajesh Should be: #define You need the hash as the first character. This is C, not bash. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1913 / Virus Database: 2114/4868 - Release Date: 03/13/12 - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] qmailtoaster and mailman - group mismatch error
Hi Eric I'm not sure this response was for me? thanks john -Original Message- From: Angus McIntyre Sent: Friday, March 09, 2012 2:46 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] qmailtoaster and mailman - group mismatch error On Mar 2, 2012, at 5:52 PM, Eric Shubert wrote: I think I found your problem. There was no qtp mailman package for x86_64 built, so I'm guessing you had the stock version. I've built mailman-2.1.12 for x86_64 and put it in the qtp-CentOS repo. That should get you further. Let us know how you make out. Eric Sorry for the delay in getting back to you. I think that took care of it. My mailman install is up and running on … well, not quite all cylinders, but running, anyway. Residual issues that I still have to clean up involve the archives (which I think are due to my questionable configuration) and handling of bounces, which I suspect may be fixed by the latest QMT release (if I'm reading between the lines of the release notes correctly). Thanks very much indeed for your help, Angus - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1913 / Virus Database: 2114/4859 - Release Date: 03/08/12 - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Migrating to new server
Natalio, thanks for the pointers. Your method is the one I used. On the Exchange side this is what I did : Added an internal domain (domain.local) for a secondary email address. Added the email domain on Exchange as an Internal Relay and configured an SMTP Connector to the Qmail server. This way Exchange 2010 will forward any email it receives that it does not have a mailbox for to the Qmailtoaster server. One fun fact I found out the hard way, do not remove mailboxes in Exchange! This will delete AD accounts with it. That is what I get for testing in a production environment. From: Natalio Gatti [mailto:nga...@gmail.com] Sent: Monday, February 06, 2012 2:47 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Migrating to new server On Mon, Feb 6, 2012 at 4:53 PM, Eric Shubert e...@shubes.netmailto:e...@shubes.net wrote: On 02/06/2012 12:03 PM, John Raley wrote: How did you manage this? I have a UTM device in front of both servers. It does call-out to verify the account exists. I am guessing when the Qmail server says the account doesn't exist, it move to the next email server. Just some ideas: 1) Create a second domain in exchange, as an alias domain. Every exchange user will have two addresses (user@domain and user@secondarydomain). 2) Create an smtproute in your qmail box to forward all secondarydomain to your exchange box 3) Create forwards for the accounts you already have migrated, so as to forward the migrated user mail to the secondary domain. This could solve one problem. All users in the qmail box can send mails to users in exchange box. Maybe you could do something similar to the reverse problem. I do not know if you are going to need a SMTP Connector in your exhchange box. Salutti, Natalio.
[qmailtoaster] Migrating to new server
One of my clients is moving from a Qmailtoaster server (setup by me) to Exchange 2010 and has tasked me to perform the migration for them. The problem I am having is that I have to manually change their Outlook settings in order to switch them to their Exchange accounts. I need to move the users over in groups and only a few at a time. I have tried deleting their accounts on the Qmail server and their new emails show up on their Exchange account. The problem I have is that users still on the Qmail server cannot send email to users that have already moved to the Exchange server and vice versa. Thoughts or suggestions on how to accomplish this?
RE: [qmailtoaster] Re: Migrating to new server
Monday, February 06, 2012 11:50 AM Eric Shubert wrote: On 02/06/2012 10:21 AM, John Raley wrote: One of my clients is moving from a Qmailtoaster server (setup by me) to Exchange 2010 and has tasked me to perform the migration for them. The problem I am having is that I have to manually change their Outlook settings in order to switch them to their Exchange accounts. I need to move the users over in groups and only a few at a time. I have tried deleting their accounts on the Qmail server and their new emails show up on their Exchange account. How did you manage this? I have a UTM device in front of both servers. It does call-out to verify the account exists. I am guessing when the Qmail server says the account doesn't exist, it move to the next email server. The problem I have is that users still on the Qmail server cannot send email to users that have already moved to the Exchange server and vice versa. Thoughts or suggestions on how to accomplish this? I don't know of a way for a single domain to be split across two servers. Other than creating a subdomain to act as a bridge between the two servers (which I'm not entirely sure how that would work), I think your best approach is probably to get all the accounts over to Exchange asap. You have my sympathies. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Migrating to new server
Monday, February 06, 2012 12:34 PM Domnick Eger wrote: If your using Exchange 2007, you can use the transporter ive done this several times, it goes smoothly without having to deal with going to each client. http://www.microsoft.com/download/en/details.aspx?displaylang=enid=1329 -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Monday, February 06, 2012 10:50 AM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Migrating to new server On 02/06/2012 10:21 AM, John Raley wrote: One of my clients is moving from a Qmailtoaster server (setup by me) to Exchange 2010 and has tasked me to perform the migration for them. The problem I am having is that I have to manually change their Outlook settings in order to switch them to their Exchange accounts. I need to move the users over in groups and only a few at a time. I have tried deleting their accounts on the Qmail server and their new emails show up on their Exchange account. How did you manage this? The problem I have is that users still on the Qmail server cannot send email to users that have already moved to the Exchange server and vice versa. Thoughts or suggestions on how to accomplish this? I don't know of a way for a single domain to be split across two servers. Other than creating a subdomain to act as a bridge between the two servers (which I'm not entirely sure how that would work), I think your best approach is probably to get all the accounts over to Exchange asap. You have my sympathies. -- -Eric 'shubes' Unfortunately it is Exchange 2010 and I do not believe Transporter Suite works on 2010. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] LDAP intergration
Greetings, Am planning on moving my current toaster from mysql auth to ldap, has anyone used this tutorial http://wiki.qmailtoaster.com/index.php/LDAP and successfully implemented this? Just looking to hear experiences with this... Alex I have been waiting for LDAP integration for a while now. I know there was a big discussion on it here but they moved to the dev list and I am not sure what happened after that. The wiki page you linked said they were waiting on vpop 5.5 back in 2009. It looks like the latest stable version of vpopmail is still 5.4.33. I have not seen a new devel release (5.5) of vpopmail since November of 2010. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Failed to download clamav and now qtp-newmodel errors out
I was trying to update with qtp-newmodel and it timed out getting the latest clamav-toaster but the script continued any way. Now it of course errors and stops at building the clamav. Is there a way to force it to download it again? If I run qtp-newmodel it just says it is already downloaded and skips over it and then errors out when it trys to build it.
RE: [qmailtoaster] Re: Failed to download clamav and now qtp-newmodel errors out
On 03/02/2011 10:10 AM, John Raley wrote: I was trying to update with qtp-newmodel and it timed out getting the latest clamav-toaster but the script continued any way. Now it of course errors and stops at building the clamav. Is there a way to force it to download it again? If I run qtp-newmodel it just says it is already downloaded and skips over it and then errors out when it trys to build it. Just remove the source package from /usr/src/qtp-upgrade/SRPMS/. Be sure to use a fresh sandbox too. -- -Eric 'shubes' Doh! I was deleteing it from the sandbox instead of /usr/src/qtp-upgrade. Turns out it was my Astaro (UTM Device) virus scanning that was holding up the download. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Blackberry invalid sender address format
-Original Message- From: Eric Shubert [mailto:e...@shubes.net] It sounds to me as though you don't have the newest qmailtoaster-plus package. qtp-newmodel now offers the option to rebuild packages that are up to date. These 2 commands: # rpm -Uvh \ http://qtp.qmailtoaster.com/repos/nodist/qmailtoaster-plus.rep o-0.2-2.noarch.rpm # yum update qmailtoaster-plus should get you current with QTP. Thanks Eric and Mike, both solutions look like they should work. I chose Eric's because it seemed simpler. My OS is woefully out of date (FC6), so it isn't one of the directories in the qtp repos (http://qtp.qmailtoaster.com/repos/fedora/), so qtp-newmodel wasn't happy when it tried to set up unionfs. However, once I opted out of using unionfs it worked fine. The new setting is now in place: grep CHKUSER_ALLOW_SENDER_CHAR_3 /var/qmail/doc/chkuser_settings.h #define CHKUSER_ALLOW_SENDER_CHAR_3 '/' Thanks for all your help. smime.p7s Description: S/MIME cryptographic signature
[qmailtoaster] ***SPAM*** [qmailtoaster] Re: Blackberry invalid sender address format
Hi Eric, I'm experiencing the problem you addressed below, but I haven't figured out how to apply your solution. I wonder if you could point out what I'm missing. I've downloaded the RPM you indicated and confirmed it with md5sum. I didn't initially delete the previous file from the SRPMS directory, but the download seems to have overwritten it anyway. However, when I run qtp-newmodel it says that the package is up to date (which, going by the version number, it is) and doesn't process it - as confirmed by checking the CHKUSER_ALLOW_SENDER_CHAR_3 entry in /var/qmail/doc/chkuser_settings.h I think maybe remove the existing package first means more than deleting the .rpm file, but when I try rpm -e it complains about a bunch of dependencies. Should I force the rpm -e, or is there a better way to get qtp-newmodel to re-process the package. I notice in http://trac.shubes.net/qtp http://trac.shubes.net/qtp that you identify allowing the script to rebuild packages as an outstanding enhancement :) Thanks, John I'm guessing that since the variable is commented out, it doesn't exist, so cannot be changed (We're not real certain about how chkuser is handling this). http://qtp.qmailtoaster.com/repos/SRPMS/qmail-toaster-1.03-1.3.20.src.rpm http://qtp.qmailtoaster.com/repos/SRPMS/qmail-toaster-1.03-1.3.20.src.rpm is a version of the package that contains the / character for chkuser. This is the only change in it from the stock package. Download (wget) it into /usr/src/qtp-upgrade/SRPMS/ (don't forget to remove the existing package there first), then run qtp-newmodel and have it rebuild the qmail-toaster package. That'll fix you up. Jake, please refresh my memory. Why is it that this '/' character hasn't been added to the stock package? It's becoming a real PITA for me as well as others. ;) -- -Eric 'shubes' smime.p7s Description: S/MIME cryptographic signature
[qmailtoaster] RDNS rejecting on a domain
I have a problem with email being rejected from one of our customers. They do not have reverse DNS setup for their mail server. I have explained to them why they need that and they are looking into getting it fixed. Until then, is there a way to whitelist mail coming form them so it passes through the rDNS check?
RE: [qmailtoaster] Domainkeys Problems
I just ran these again today and they failed on Domainkeys test. I set this up about a month ago so DNS should have updated already. I used sa-t...@sendmail.net with the following results: Authentication System: DomainKeys Identified Mail Result: (no result present) Reporting host: More information: http://mipassoc.org/dkim/ Sendmail milter: https://sourceforge.net/projects/dkim-milter/ Authentication System: Domain Keys Result: DK signature confirmed BAD Description: Signature verification failed, message may have been tampered with or corrupted Reporting host: sendmail.net More information: http://antispam.yahoo.com/domainkeys Sendmail milter: https://sourceforge.net/projects/domainkeys-milter/ Authentication System: Sender ID Result: SID data confirmed GOOD Description: Sending host is authorized for sending domain Reporting host: sendmail.net More information: http://www.microsoft.com/senderid Sendmail milter: https://sourceforge.net/projects/sid-milter/ Authentication System: Sender Permitted From (SPF) Result: SPF data confirmed GOOD Description: Sending host is authorized for sending domain Reporting host: sendmail.net More information: http://spf.pobox.com/ And I also used email-t...@qmailtoaster.com with the results: Here are the spamassassin headers from this server: No, score=0.6 required=5.0 tests=AWL,DK_POLICY_SIGNALL, DK_SIGNED,HTML_MESSAGE,RDNS_NONE autolearn=no version=3.2.5 Return path was: John Raley j...@fmcfinance.net Original test request was sent using: SPF Record: PASS Sent from a valid domain: PASS DomainKey: FAIL Odd. In that case, what services did you test with that did not work? And when did you enable Domainkeys? Is it possible that your updated DNS information had not yet spread and that those services were using cached (and therefor wrong) DNS information. E.g. they might not have been able to see the selector or policy record... -- Corporation. An ingenious device for obtaining individual profit without individual responsibility. Bierce, Ambrose - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Domainkeys Problems
The test emails just had my signature in them and test as the subject. I will try a new key pair and see if that fixes the problem. I might go ahead with adding DKIM as well. I will let you know the results. The domainkeys code in QMT is known to be a bit buggy, but that has only been on checking, not signing ttbomk. Is there something perhaps in the content of your test that is triggering a malfunction? IOW, how simple is the content in your test message? If it's trivial text, then I'd suspect that your configuration has an issue. Perhaps your pub/private keys got mixed up somehow? You might want to generate a new key pair and reinstall them to be sure. Or, I believe there's a way to validate that the keys you're using belong together. I'm not that familiar with openssl off hand to tell you how to do that. John Raley wrote: I just ran these again today and they failed on Domainkeys test. I set this up about a month ago so DNS should have updated already. I used sa-t...@sendmail.net with the following results: Authentication System: DomainKeys Identified Mail Result: (no result present) Reporting host: More information: http://mipassoc.org/dkim/ Sendmail milter: https://sourceforge.net/projects/dkim- milter/ Authentication System: Domain Keys Result: DK signature confirmed BAD Description: Signature verification failed, message may have been tampered with or corrupted Reporting host: sendmail.net More information: http://antispam.yahoo.com/domainkeys Sendmail milter: https://sourceforge.net/projects/domainkeys-milter/ Authentication System: Sender ID Result: SID data confirmed GOOD Description: Sending host is authorized for sending domain Reporting host: sendmail.net More information: http://www.microsoft.com/senderid Sendmail milter: https://sourceforge.net/projects/sid- milter/ Authentication System: Sender Permitted From (SPF) Result: SPF data confirmed GOOD Description: Sending host is authorized for sending domain Reporting host: sendmail.net More information: http://spf.pobox.com/ And I also used email-t...@qmailtoaster.com with the results: Here are the spamassassin headers from this server: No, score=0.6 required=5.0 tests=AWL,DK_POLICY_SIGNALL, DK_SIGNED,HTML_MESSAGE,RDNS_NONE autolearn=no version=3.2.5 Return path was: John Raley j...@fmcfinance.net Original test request was sent using: SPF Record: PASS Sent from a valid domain: PASS DomainKey: FAIL Odd. In that case, what services did you test with that did not work? And when did you enable Domainkeys? Is it possible that your updated DNS information had not yet spread and that those services were using cached (and therefor wrong) DNS information. E.g. they might not have been able to see the selector or policy record... -- Corporation. An ingenious device for obtaining individual profit without individual responsibility. Bierce, Ambrose - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' --- -- Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --- -- Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list- unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list- h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Domainkeys Problems
Every email testing service I have tested fails on domainkeys for my qmailtoaster server. I tested my DNS TXT record and came back with: ANSWER SECTION: private._domainkey.fmcfinance.net. 86400 IN TXTk=rsa\ p=MEwwDQYJKoZIhvcNAQEBBQADOwAwOAIxAOIOlQryOFli9YpaxW4XMJL6GQni/tqs2OWSAXPGSU E6AOkaTGyogIpkqJAC/GVrvQIDAQAB This is the header for an email I sent myself: Content-Filter: maildrop-toaster Return-Path: j...@fmcfinance.net Delivered-To: fmcfinance.net-j...@fmcfinance.net Received: (qmail 4136 invoked by uid 89); 2 Feb 2010 16:13:17 - Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=private; d=fmcfinance.net; b=r7PY5hXyE/+6tJ64WKaNpbjIMblrPCPuvQJgWGzhALsUwZNIQEXo4HL8x7uF0kET; Received: from unknown (HELO JohnLaptop) (j...@fmcfinance.net@10.1.100.21) by mail.fmcfinance.net with ESMTPA; 2 Feb 2010 16:13:17 - From: John Raley j...@fmcfinance.net To: 'John Raley' j...@fmcfinance.net Subject: Domainkeys Test Date: Tue, 2 Feb 2010 10:12:56 -0600 Message-ID: 004001caa422$94b8c1e0$be2a45...@net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary==_NextPart_000_0041_01CAA3F0.4A1E51E0 X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AcqkIpRsAWDWMaj7TjyN5swSyM9FbQ== Content-Language: en-us I followed the video on the qmailtoaster website How to setup DomainKeys for Qmailtoaster and Bind. Any other information that can help troubleshoot this, just let me know.
RE: [qmailtoaster] Domainkeys Problems
-Original Message- From: Martin Waschbuesch [mailto:mar...@waschbuesch.de] Sent: Tuesday, February 02, 2010 11:10 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Domainkeys Problems John, Hm, I used the tools on http://domainkeys.sourceforge.net to verify if your DNS setup is correct and all appears to be in order. Since the outgoing mail is signed and that looks good, too (pointing to the right selector), I really am at a loss here. Do you have a sample header for a rejected email? E.g. could you sent this to some webmail account like google or yahoo and send the headers that will produce? If need be, you should set the policy record to signs SOME mail (curently it says it signs all email), so that your tests do not get blocked and keep you from investigating this... That's all I can think of. Anyone else got some more ideas? Martin Am 02.02.2010 um 11:49 schrieb John Raley: Every email testing service I have tested fails on domainkeys for my qmailtoaster server. I tested my DNS TXT record and came back with: ANSWER SECTION: private._domainkey.fmcfinance.net. 86400 IN TXTk=rsa\ p=MEwwDQYJKoZIhvcNAQEBBQADOwAwOAIxAOIOlQryOFli9YpaxW4XMJL6GQni/tqs2OWSA XPGSUE6AOkaTGyogIpkqJAC/GVrvQIDAQAB This is the header for an email I sent myself: Content-Filter: maildrop-toaster Return-Path: j...@fmcfinance.net Delivered-To: fmcfinance.net-j...@fmcfinance.net Received: (qmail 4136 invoked by uid 89); 2 Feb 2010 16:13:17 - Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=private; d=fmcfinance.net; b=r7PY5hXyE/+6tJ64WKaNpbjIMblrPCPuvQJgWGzhALsUwZNIQEXo4HL8x7uF0kET; Received: from unknown (HELO JohnLaptop) (j...@fmcfinance.net@10.1.100.21) by mail.fmcfinance.net with ESMTPA; 2 Feb 2010 16:13:17 - From: John Raley j...@fmcfinance.net To: 'John Raley' j...@fmcfinance.net Subject: Domainkeys Test Date: Tue, 2 Feb 2010 10:12:56 -0600 Message-ID: 004001caa422$94b8c1e0$be2a45...@net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary==_NextPart_000_0041_01CAA3F0.4A1E51E0 X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AcqkIpRsAWDWMaj7TjyN5swSyM9FbQ== Content-Language: en-us I followed the video on the qmailtoaster website How to setup DomainKeys for Qmailtoaster and Bind. Any other information that can help troubleshoot this, just let me know. -- Years ago my mother used to say to me, she'd say, 'In this world, Elwood, you must be oh so smart or oh so pleasant.' Well, for years I was smart. I recommend pleasant. You may quote me. James Stewart as Elwood P. Dowd in 'Harvey' --- -- Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --- -- Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list- unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list- h...@qmailtoaster.com Actually gmail says it passes Domainkeys check. This is the header for an email I just sent my gmail account: Delivered-To: trols...@gmail.com Received: by 10.100.210.10 with SMTP id i10cs34536ang; Tue, 2 Feb 2010 09:24:18 -0800 (PST) Received: by 10.150.251.10 with SMTP id y10mr8970648ybh.131.1265131458112; Tue, 02 Feb 2010 09:24:18 -0800 (PST) Return-Path: j...@fmcfinance.net Received: from mail.fmcfinance.net (mail.fmcfinance.net [207.203.115.100]) by mx.google.com with ESMTP id 17si13367599yxe.134.2010.02.02.09.24.16; Tue, 02 Feb 2010 09:24:16 -0800 (PST) Received-SPF: pass (google.com: domain of j...@fmcfinance.net designates 207.203.115.100 as permitted sender) client-ip=207.203.115.100; DomainKey-Status: good Authentication-Results: mx.google.com; spf=pass (google.com: domain of j...@fmcfinance.net designates 207.203.115.100 as permitted sender) smtp.mail=j...@fmcfinance.net; domainkeys=pass header.from=j...@fmcfinance.net Received: (qmail 11210 invoked by uid 89); 2 Feb 2010 17:24:26 - Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=private; d=fmcfinance.net; b=XCeWdhi32GqN9cWW35nEH6yooG74pZ5+CtvwdSouh66DCCJxzagtm17SJenzV5sI; Received: from unknown (HELO JohnLaptop) (j...@fmcfinance.net@10.1.100.21) by mail.fmcfinance.net with ESMTPA; 2 Feb 2010 17:24:26 - From: John Raley j...@fmcfinance.net To: trols...@gmail.com Subject: Testing Domainkeys Date: Tue, 2 Feb 2010 11:24:05 -0600 Message-ID: 006401caa42c$85561d10$900257...@net MIME
Re: [qmailtoaster] qmailadmin can't find libmysqlclient.so.15
- Jake Vickers j...@qmailtoaster.com wrote: John wrote: When I visit the qmailadmin URL that I've always used I get a 500 internal server error. Error log says /usr/share/qmailadmin/index.cgi: error while loading shared libraries: libmysqlclient.so.15: cannot open shared object file: No such file or directory So I'm tracing my steps and following various forum threads on the topic, trying things like removing and recreating the symlinks in /usr/lib/mysql, running ldconfig, restarting Apache, blah, blah, blah. Nothing works. Restarts for qmailtoaster, Apache, and MySQL all fine. Can login to mysql, can use command line commands for vpopmail, I don't get it. What has changed? Upgrade Webmin. Also, it is possible I've screwed up /etc/group when I added apache as a member of the new group, but I scrolled back and diff'd the contents of /etc/group and no difference. Upgraded qmailadmin while I was at it, no problems. ld.so.conf.d/mysql-i386.conf says to include /usr/lib/mysql. Here are the contents of that dir: -rwxr-xr-x 1 root root 5421 Dec 18 2007 mysql_config -rwxr-xr-x 1 root root 11555 Dec 18 2007 mysqlbug -rw-r--r-- 1 root root 318772 Dec 18 2007 libmysys.a -rw-r--r-- 1 root root 1640514 Dec 18 2007 libmysqlclient_r.a -rw-r--r-- 1 root root 30466 Dec 18 2007 libmyisammrg.a -rw-r--r-- 1 root root 373280 Dec 18 2007 libmyisam.a -rw-r--r-- 1 root root 50492 Dec 18 2007 libheap.a -rw-r--r-- 1 root root 17510 Dec 18 2007 libvio.a -rw-r--r-- 1 root root 1359406 Dec 18 2007 libmystrings.a -rwxr-xr-x 1 root root 1444188 Dec 18 2007 libmysqlclient.so.15.0.0 -rwxr-xr-x 1 root root 1450532 Dec 18 2007 libmysqlclient_r.so.15.0.0 -rw-r--r-- 1 root root 1631912 Dec 18 2007 libmysqlclient.a -rw-r--r-- 1 root root 11976 Dec 18 2007 libdbug.a drwxr-xr-x 63 root root 16384 May 22 04:02 .. lrwxrwxrwx 1 root root 24 Oct 25 12:00 libmysqlclient.so.15 - libmysqlclient.so.15.0.0 lrwxrwxrwx 1 root root 26 Oct 25 12:01 libmysqlclient_r.so.15 - libmysqlclient_r.so.15.0.0 lrwxrwxrwx 1 root root 24 Oct 25 12:01 libmysqlclient.so - libmysqlclient.so.15.0.0 lrwxrwxrwx 1 root root 26 Oct 25 12:01 libmysqlclient_r.so - libmysqlclient_r.so.15.0.0 drwxr-xr-x 2 root root 4096 Oct 25 12:14 . ldconfig -v |grep libmysqlclient shows libmysqlclient_r.so.15 - libmysqlclient_r.so.15.0.0 libmysqlclient.so.15 - libmysqlclient.so.15.0.0 ldd /usr/share/qmailadmin/index.cgi |grep libmysql shows libmysqlclient.so.15 = /usr/lib/mysql/libmysqlclient.so.15 (0x005b9000) Any clues appreciated. Can you tell us a little about your system? (distro/arch) When you upgraded qmailadmin, what switches did you use to rebuild it? What does the command getenforce show? I wrote this original post but I'm replying from this email that I have to use since my system isn't processing email. Interesting that this one got through, as I never received it to the original address. So this email may be somewhat tied to my other post about upgrading clamav and email no longer working. Amazingly, I might have been right about that since this email went through after I upgraded Webmin, and after I upgraded qmailadmin. FYI I mentioned in my other thread that I fixed the qmailadmin 500 internal server error by creating a symlink to the libmysqlclient.so.15 in /usr/lib. I created symlinks to the others while I was there, even though this alone fixed it: cd /usr/lib ln -s mysql/libmysqlclient.so.15.0.0 libmysqlclient.so.15 I still don't know why I needed to do this, since /etc/ld.so.conf includes this line: include ld.so.conf.d/*.conf and ld.so.conf.d/*.conf points to /etc/ld.so.conf.d/mysql-i386.conf, which includes this line: /usr/lib/mysql which is the directory that includes libmysqlclient.so.15 (symlink to libmysqlclient.so.15.0.0). Smelled like a permision issue to me yesterday, and still does. getenforce command indicates disabled. I've also just noticed squirrelmail is down (blank white screen). Log shows PHP Warning: require_once(../config/config.php) [a href='function.require-once'function.require-once/a]: failed to open stream: Permission denied in /usr/share/squirrelmail/functions/global.php on line 92 PHP Fatal error: require_once() [a href='function.require'function.require/a]: Failed opening required '../config/config.php' (include_path='.:/usr/share/pear') in /usr/share/squirrelmail/functions/global.php on line 92 So squirrelmail and qmailadmin not working: fairly certain a result of the Webmin upgrade, v1.410 to v1.490, as nothing else interesting going on prior to that. John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need
Re: [qmailtoaster] Re: can't open/parse clamd.conf
John wrote: Ok, dumb. I got the above errors because I was in the directory and the script removed it. So I cd'd into a safe directory and tried again. Upgrade of a few packages: qmail-toaster, clamav, and squirrelmail (since that's not working, either). Upgrades/rebuilds went smoothly. clamd still won't start, and still no mail. So svc -d /var/qmail/supervise/clamd /var/qmail/supervise/clamd/log to stop supervise from trying to start it. I'm beyond frustrated. Strangely calm, at peace. Appreciate the assistance so far. Any other help more than welcome. Let's get some basic information and take a step back. You're running as root right? (I know, but I *have* to ask!) What does rpm -qa | grep toaster | sort show? What happens when you manually run freshclam? What do your clam logs show (/var/log/qmail/clamd/current) Yes, root. 'rpm -qa |grep toaster |sort' command gives: autorespond-toaster-2.0.4-1.3.3 clamav-toaster-0.95.2-1.3.30 control-panel-toaster-0.5-1.3.4 courier-authlib-toaster-0.59.2-1.3.6 courier-imap-toaster-4.1.2-1.3.7 daemontools-toaster-0.76-1.3.3 ezmlm-cgi-toaster-0.53.324-1.3.3 ezmlm-toaster-0.53.324-1.3.3 isoqlog-toaster-2.1-1.3.4 libdomainkeys-toaster-0.68-1.3.3 libsrs2-toaster-1.0.18-1.3.3 maildrop-toaster-2.0.3-1.3.5 maildrop-toaster-devel-2.0.3-1.3.5 qmailadmin-toaster-1.2.12-1.3.8 qmailmrtg-toaster-4.2-1.3.3 qmail-pop3d-toaster-1.03-1.3.20 qmail-toaster-1.03-1.3.20 qmailtoaster-plus-0.3.1-1.4.14 qmailtoaster-plus.repo-0.2-2 ripmime-toaster-1.4.0.6-1.3.3 simscan-toaster-1.4.0-1.3.8 spamassassin-toaster-3.2.4-1.3.13 squirrelmail-toaster-1.4.19-1.3.15 ucspi-tcp-toaster-0.88-1.3.5 vpopmail-toaster-5.4.17-1.3.4 Manually running freshclam produces: ClamAV update process started at Mon Oct 26 19:10:31 2009 WARNING: Can't query current.cvd.clamav.net WARNING: Invalid DNS reply. Falling back to HTTP mode. Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary failure in name resolution WARNING: Can't read main.cvd header from database.clamav.net (IP: ) Giving up on database.clamav.net... Update failed. Your network may be down or none of the mirrors listed in /etc/freshclam.conf is working. Check http://www.clamav.net/support/mirror-problem for possible reasons. /var/log/qmail/clamd/current shows: ERROR: Can't open/parse the config file /etc/clamd.conf --repeats every second until I turn the svc off. And here's something new: I login via ssh from another computer under a standard user account I always use and get ls: /etc/profile: Permission denied 'ls -ld /etc/profile' (from root account) gives -rw-r--r-- 1 root root 937 Jan 31 2006 /etc/profile and 'ls -ld /etc' gives drw--- 88 root root 4096 Oct 26 11:16 /etc Is that right?! It certainly explains /etc/profile permission denied. Can you tell me what permissions /etc should have, 'cause attempting to restore it into root's home directory fails. Says it's not in the backup, but it should be... 'whoami' command under regular user account gives whoami: cannot find name for user ID 502 su'ing to another non-root account gives the same thing.
Re: [qmailtoaster] Re: can't open/parse clamd.conf
Thanks. I just looked at another system and it has same as you for /etc permissions. So I update and email works again! I just wonder what other permissions got whacked on this server... It's not entirely over, unfortunately. squirrelmail interface is there again (no more blank page), but can't login. I'll have to look at that later, but at least my priority issue is resolved. Thanks qmailtoaster-list! --Will be unsubscribing this email address now that old one works. John - Andreas Galatis a...@unet.de wrote: Hi John, m...@wir:~ ls -ld /etc/ drwxr-xr-x 85 root root 8192 2009-10-23 08:06 /etc/ Am Monday 26 October 2009 20:33:45 schrieb John: John wrote: Ok, dumb. I got the above errors because I was in the directory and the script removed it. So I cd'd into a safe directory and tried again. Upgrade of a few packages: qmail-toaster, clamav, and squirrelmail (since that's not working, either). Upgrades/rebuilds went smoothly. clamd still won't start, and still no mail. So svc -d /var/qmail/supervise/clamd /var/qmail/supervise/clamd/log to stop supervise from trying to start it. I'm beyond frustrated. Strangely calm, at peace. Appreciate the assistance so far. Any other help more than welcome. Let's get some basic information and take a step back. You're running as root right? (I know, but I *have* to ask!) What does rpm -qa | grep toaster | sort show? What happens when you manually run freshclam? What do your clam logs show (/var/log/qmail/clamd/current) Yes, root. 'rpm -qa |grep toaster |sort' command gives: autorespond-toaster-2.0.4-1.3.3 clamav-toaster-0.95.2-1.3.30 control-panel-toaster-0.5-1.3.4 courier-authlib-toaster-0.59.2-1.3.6 courier-imap-toaster-4.1.2-1.3.7 daemontools-toaster-0.76-1.3.3 ezmlm-cgi-toaster-0.53.324-1.3.3 ezmlm-toaster-0.53.324-1.3.3 isoqlog-toaster-2.1-1.3.4 libdomainkeys-toaster-0.68-1.3.3 libsrs2-toaster-1.0.18-1.3.3 maildrop-toaster-2.0.3-1.3.5 maildrop-toaster-devel-2.0.3-1.3.5 qmailadmin-toaster-1.2.12-1.3.8 qmailmrtg-toaster-4.2-1.3.3 qmail-pop3d-toaster-1.03-1.3.20 qmail-toaster-1.03-1.3.20 qmailtoaster-plus-0.3.1-1.4.14 qmailtoaster-plus.repo-0.2-2 ripmime-toaster-1.4.0.6-1.3.3 simscan-toaster-1.4.0-1.3.8 spamassassin-toaster-3.2.4-1.3.13 squirrelmail-toaster-1.4.19-1.3.15 ucspi-tcp-toaster-0.88-1.3.5 vpopmail-toaster-5.4.17-1.3.4 Manually running freshclam produces: ClamAV update process started at Mon Oct 26 19:10:31 2009 WARNING: Can't query current.cvd.clamav.net WARNING: Invalid DNS reply. Falling back to HTTP mode. Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary failure in name resolution WARNING: Can't read main.cvd header from database.clamav.net (IP: ) Giving up on database.clamav.net... Update failed. Your network may be down or none of the mirrors listed in /etc/freshclam.conf is working. Check http://www.clamav.net/support/mirror-problem for possible reasons. /var/log/qmail/clamd/current shows: ERROR: Can't open/parse the config file /etc/clamd.conf --repeats every second until I turn the svc off. And here's something new: I login via ssh from another computer under a standard user account I always use and get ls: /etc/profile: Permission denied 'ls -ld /etc/profile' (from root account) gives -rw-r--r-- 1 root root 937 Jan 31 2006 /etc/profile and 'ls -ld /etc' gives drw--- 88 root root 4096 Oct 26 11:16 /etc Is that right?! It certainly explains /etc/profile permission denied. Can you tell me what permissions /etc should have, 'cause attempting to restore it into root's home directory fails. Says it's not in the backup, but it should be... 'whoami' command under regular user account gives whoami: cannot find name for user ID 502 su'ing to another non-root account gives the same thing. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: can't open/parse clamd.conf
Seems everything is resolved at this point, and sqirrelmail works fine. Since the logs complained about the compatibility plugin, I followed instructions I found and removed the plugin via conf.pl, renamed the directory, downloaded a current version, decompressed it, untarred it, moved it to the plugins dir for SQ, patched the compatibility code from within the new compatibility dir according to the INSTALL instructions: patch -p0 patches/compatibility_patch-1.4.11.diff (note the version doesn't match the qmailtoaster SQ version I'm running--1.4.19) And at that point I realized I needed to enlarge my window so I could see everything going on in conf.pl plugins, where I observed I had both compatibility.old and compatibility plugins installed. Duh. So, since the documentation says you don't need them, I uninstalled both and everything works fine. But enabling them each separately again to see if I can recreate the white page doesn't reproduce it. Go figure. John Then I removed - Eric Shubert e...@shubes.net wrote: This sounds to me like your server may be p0wned. IOW, your toaster might have been cracked/compromised. John wrote: Thanks. I just looked at another system and it has same as you for /etc permissions. So I update and email works again! I just wonder what other permissions got whacked on this server... It's not entirely over, unfortunately. squirrelmail interface is there again (no more blank page), but can't login. I'll have to look at that later, but at least my priority issue is resolved. Thanks qmailtoaster-list! --Will be unsubscribing this email address now that old one works. John - Andreas Galatis a...@unet.de wrote: Hi John, m...@wir:~ ls -ld /etc/ drwxr-xr-x 85 root root 8192 2009-10-23 08:06 /etc/ Am Monday 26 October 2009 20:33:45 schrieb John: John wrote: Ok, dumb. I got the above errors because I was in the directory and the script removed it. So I cd'd into a safe directory and tried again. Upgrade of a few packages: qmail-toaster, clamav, and squirrelmail (since that's not working, either). Upgrades/rebuilds went smoothly. clamd still won't start, and still no mail. So svc -d /var/qmail/supervise/clamd /var/qmail/supervise/clamd/log to stop supervise from trying to start it. I'm beyond frustrated. Strangely calm, at peace. Appreciate the assistance so far. Any other help more than welcome. Let's get some basic information and take a step back. You're running as root right? (I know, but I *have* to ask!) What does rpm -qa | grep toaster | sort show? What happens when you manually run freshclam? What do your clam logs show (/var/log/qmail/clamd/current) Yes, root. 'rpm -qa |grep toaster |sort' command gives: autorespond-toaster-2.0.4-1.3.3 clamav-toaster-0.95.2-1.3.30 control-panel-toaster-0.5-1.3.4 courier-authlib-toaster-0.59.2-1.3.6 courier-imap-toaster-4.1.2-1.3.7 daemontools-toaster-0.76-1.3.3 ezmlm-cgi-toaster-0.53.324-1.3.3 ezmlm-toaster-0.53.324-1.3.3 isoqlog-toaster-2.1-1.3.4 libdomainkeys-toaster-0.68-1.3.3 libsrs2-toaster-1.0.18-1.3.3 maildrop-toaster-2.0.3-1.3.5 maildrop-toaster-devel-2.0.3-1.3.5 qmailadmin-toaster-1.2.12-1.3.8 qmailmrtg-toaster-4.2-1.3.3 qmail-pop3d-toaster-1.03-1.3.20 qmail-toaster-1.03-1.3.20 qmailtoaster-plus-0.3.1-1.4.14 qmailtoaster-plus.repo-0.2-2 ripmime-toaster-1.4.0.6-1.3.3 simscan-toaster-1.4.0-1.3.8 spamassassin-toaster-3.2.4-1.3.13 squirrelmail-toaster-1.4.19-1.3.15 ucspi-tcp-toaster-0.88-1.3.5 vpopmail-toaster-5.4.17-1.3.4 Manually running freshclam produces: ClamAV update process started at Mon Oct 26 19:10:31 2009 WARNING: Can't query current.cvd.clamav.net WARNING: Invalid DNS reply. Falling back to HTTP mode. Reading CVD header (main.cvd): ERROR: Can't get information about database.clamav.net: Temporary failure in name resolution WARNING: Can't read main.cvd header from database.clamav.net (IP: ) Giving up on database.clamav.net... Update failed. Your network may be down or none of the mirrors listed in /etc/freshclam.conf is working. Check http://www.clamav.net/support/mirror-problem for possible reasons. /var/log/qmail/clamd/current shows: ERROR: Can't open/parse the config file /etc/clamd.conf --repeats every second until I turn the svc off. And here's something new: I login via ssh from another computer under a standard user account I always use and get ls: /etc/profile: Permission denied 'ls -ld /etc/profile' (from root account) gives -rw-r--r-- 1 root root 937 Jan 31 2006 /etc/profile
[qmailtoaster] qmailadmin can't find libmysqlclient.so.15
When I visit the qmailadmin URL that I've always used I get a 500 internal server error. Error log says /usr/share/qmailadmin/index.cgi: error while loading shared libraries: libmysqlclient.so.15: cannot open shared object file: No such file or directory So I'm tracing my steps and following various forum threads on the topic, trying things like removing and recreating the symlinks in /usr/lib/mysql, running ldconfig, restarting Apache, blah, blah, blah. Nothing works. Restarts for qmailtoaster, Apache, and MySQL all fine. Can login to mysql, can use command line commands for vpopmail, I don't get it. What has changed? Upgrade Webmin. Also, it is possible I've screwed up /etc/group when I added apache as a member of the new group, but I scrolled back and diff'd the contents of /etc/group and no difference. Upgraded qmailadmin while I was at it, no problems. ld.so.conf.d/mysql-i386.conf says to include /usr/lib/mysql. Here are the contents of that dir: -rwxr-xr-x 1 root root5421 Dec 18 2007 mysql_config -rwxr-xr-x 1 root root 11555 Dec 18 2007 mysqlbug -rw-r--r-- 1 root root 318772 Dec 18 2007 libmysys.a -rw-r--r-- 1 root root 1640514 Dec 18 2007 libmysqlclient_r.a -rw-r--r-- 1 root root 30466 Dec 18 2007 libmyisammrg.a -rw-r--r-- 1 root root 373280 Dec 18 2007 libmyisam.a -rw-r--r-- 1 root root 50492 Dec 18 2007 libheap.a -rw-r--r-- 1 root root 17510 Dec 18 2007 libvio.a -rw-r--r-- 1 root root 1359406 Dec 18 2007 libmystrings.a -rwxr-xr-x 1 root root 1444188 Dec 18 2007 libmysqlclient.so.15.0.0 -rwxr-xr-x 1 root root 1450532 Dec 18 2007 libmysqlclient_r.so.15.0.0 -rw-r--r-- 1 root root 1631912 Dec 18 2007 libmysqlclient.a -rw-r--r-- 1 root root 11976 Dec 18 2007 libdbug.a drwxr-xr-x 63 root root 16384 May 22 04:02 .. lrwxrwxrwx 1 root root 24 Oct 25 12:00 libmysqlclient.so.15 - libmysqlclient.so.15.0.0 lrwxrwxrwx 1 root root 26 Oct 25 12:01 libmysqlclient_r.so.15 - libmysqlclient_r.so.15.0.0 lrwxrwxrwx 1 root root 24 Oct 25 12:01 libmysqlclient.so - libmysqlclient.so.15.0.0 lrwxrwxrwx 1 root root 26 Oct 25 12:01 libmysqlclient_r.so - libmysqlclient_r.so.15.0.0 drwxr-xr-x 2 root root4096 Oct 25 12:14 . ldconfig -v |grep libmysqlclient shows libmysqlclient_r.so.15 - libmysqlclient_r.so.15.0.0 libmysqlclient.so.15 - libmysqlclient.so.15.0.0 ldd /usr/share/qmailadmin/index.cgi |grep libmysql shows libmysqlclient.so.15 = /usr/lib/mysql/libmysqlclient.so.15 (0x005b9000) Any clues appreciated. John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Sent email rejected for only one user
I have a user that can not send an email to one particular domain, at least that I'm aware of. When rliso...@cotterschools.org sends and email to johnostrow...@desch.org, or any other person at the domain, he gets an immediate bounce back. However, I can send this person (johnostrow...@desch.org) an email with my account (jhan...@cotterschools.org) and he receives it without a problem. The bounce back is not very intuitive, but suggests that the recipients email server is refusing the message. The message is below. I'm leaving the email addresses and domains as they appear to help try and solve the problem. The SMTP logs on my end indicate that the message is good, and sent. I've talked with the email tech at the recipient domain, and he can not find any indication on why the email might have been rejected by his server. In fact, there's no evidence that it even hit his mail server. Bounce Message: Hi. This is the qmail-send program at mail.cotterschools.org. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. johnostrow...@desch.org: User and password not set, continuing without authentication. johnostrow...@desch.org 64.8.140.227 failed after I sent the message. Remote host said: 550 5.7.1 Requested action not taken: message refused --- Below this line is a copy of the message. Return-Path: rliso...@cotterschools.org Received: (qmail 20730 invoked by uid 89); 30 Sep 2009 20:18:00 - Received: from unknown (HELO mail.winonacotter.org) (127.0.0.1) by mail.cotterschools.org with SMTP; 30 Sep 2009 20:18:00 - Received: from 10.6.253.155 (SquirrelMail authenticated user rlisowsk) by mail.winonacotter.org with HTTP; Wed, 30 Sep 2009 15:18:00 -0500 (CDT) Message-ID: c46cd64966e9079c62e6be0be16f8f17.squir...@mail.winonacotter.org In-Reply-To: 42e23459c0c9c646922180bd425b82de02044...@mail.desch.local References: 42e23459c0c9c646922180bd425b82de02044...@mail.desch.local Date: Wed, 30 Sep 2009 15:18:00 -0500 (CDT) Subject: Re: Test email From: rliso...@cotterschools.org To: John Ostrowski johnostrow...@desch.org User-Agent: SquirrelMail/1.4.17-1.3.13 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal -- Any advice on where to look or how to proceed? Could the problem be on my end? Thanks, John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Problems emailing large number of recipients
John Hansen wrote: Jake, Are you suggesting that even if I use ezmlm for sending to this many recipients (over 254) that I'll still receive chkuser errors? John Jake Vickers wrote: Nope. ezmlm does not have the same limitation that chkuser does, since it directly injects the messages. Thank you for clarifying. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Problems emailing large number of recipients
Am Thursday 24 September 2009 22:41:43 schrieb Jake Vickers: John Hansen wrote: Jake, Are you suggesting that even if I use ezmlm for sending to this many recipients (over 254) that I'll still receive chkuser errors? John Nope. ezmlm does not have the same limitation that chkuser does, since it directly injects the messages. Andreas Galatis wrote: Hi John, Consider using worldmerge, shareware that works very good and pulls data out of a database. It does not send via outlook but has it's own mailclient. It's not free, but 40$ isn't exaggerated and it does a very good job. This tool sends mails one per one. Only if you use iptables recent, you will have to exclude the senders ip-address from this rule. Andreas Thanks Andreas for the suggestion. The database software we are using to send out the emails is using a mail merge program that also sends out emails one per one. I have several options, but the person sending the emails likes using the Outlook option because it makes the emails more personable. I assume the problem is, even though the program sends the emails out one by one, that it sends them out fast enough that there is not enough time in between each email, and chkuser thinks we are violating recipient and security policies. Is there a time-out setting (SMTP?) before the next email can be sent so it can be seen as a single email and not as a large group that might be contributing to the chkuser violations? For example each email is sent out from the database as a single email, but they are still being caught by chkuser as exceeding the recipient limit. If there is a setting I can change in qmailtoaster, let me know so I can test it. Thanks, John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Problems emailing large number of recipients
Greetings list, I have a problem with one of my users who is trying to send out a large amount of emails (900+) at one time. We are a school, and we try to send out regular updates to our alumni regarding upcoming events and interests. These emails are generated via a database program, then sent through this particular users Outlook client. This is not spam, but to our email server, it is being treated like it. Which I appreciate. All the users in the database have asked to have emails sent to them. Below are the 2 separate bounce back messages, the tcp.smtp settings, and the spamdyke.conf setting for max recipients. It appears that the messages are still being stopped after the recipient limit hits 50. The chkuser_recptlimit=1000. What do I need to change/update in order for these to be sent out without errors? __ From: System Administrator Sent: Thursday, September 24, 2009 10:00 AM To: Ellen Lastname Subject:Undeliverable: Go Big Blue! Your message did not reach some or all of the intended recipients. Subject: Go Big Blue! Sent: 9/24/2009 9:59 AM The following recipient(s) could not be reached: different-u...@domain.net on 9/24/2009 10:00 AM 571 sorry, you are violating our security policies (#5.7.1 - chkuser) __ From: System Administrator Sent: Thursday, September 24, 2009 9:59 AM To: Ellen Lastname Subject:Undeliverable: Go Big Blue! Your message did not reach some or all of the intended recipients. Subject: Go Big Blue! Sent: 9/24/2009 9:59 AM The following recipient(s) could not be reached: u...@domain.com on 9/24/2009 9:59 AM 571 sorry, reached maximum number of recipients for one session (#5.7.1 - chkuser) tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1 :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=1000,CHKUSER_WRONGRCPTLIMIT=100,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 /et/spamdyke/spamdyke.conf max-recipients=1000 Thanks, John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Problems emailing large number of recipients
Steve Huff wrote: On Sep 24, 2009, at 11:55 AM, John Hansen wrote: What do I need to change/update in order for these to be sent out without errors? you need to set up an ezmlm mailing list on the toaster and have your user send mass emails via this list rather than via Outlook. that's what mailing lists are for. :) -steve I realize that's an option, and probably my first choice as well. We all ready utilize many ezmlm mailing lists for teachers, staff, and parents. For this particular situation though the data is kept in a database all ready that has the mail/merge functionality designed for this specific purpose, and it would be nice to keep the data in one place instead of two. Thanks for your suggestion. John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Problems emailing large number of recipients
John Hansen Director of Technology Cotter Schools 1115 W. Broadway Winona, MN 55987 507-453-5000 www.cotterschools.org Steve Huff wrote: On Sep 24, 2009, at 11:55 AM, John Hansen wrote: What do I need to change/update in order for these to be sent out without errors? you need to set up an ezmlm mailing list on the toaster and have your user send mass emails via this list rather than via Outlook. that's what mailing lists are for. :) -steve John Hansen wrote: I realize that's an option, and probably my first choice as well. We all ready utilize many ezmlm mailing lists for teachers, staff, and parents. For this particular situation though the data is kept in a database all ready that has the mail/merge functionality designed for this specific purpose, and it would be nice to keep the data in one place instead of two. Thanks for your suggestion. John Jake Vickers wrote: I believe that chkuser has a hard limit of 254 for the number of recipients due to the string type used in the code. You would need to modify the source code to change the string type to allow larger arrays. (I dimly remember looking into this a couple years ago) Also, it's rather easy to recompile (from source) ezmlm and enable mysql support. It's not in the stock QMT package (and is honestly easier to do in the new version of ezmlm from source). You will need some overrides for removing the old package since qmailadmin depends on it. Jake, Are you suggesting that even if I use ezmlm for sending to this many recipients (over 254) that I'll still receive chkuser errors? John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] webmail
Ariel wrote: I need to get some good webmail, free, to an ISP other than roundcube or squirrelmail. for approximately 1000 users Eric Shubert wrote: eGroupware has an IMAP client that I hear is rather nice. eGw is much more than just IMAP though. You could look at horde as well. That's about it in the free category afaik. If you find something else please let us know. -- -Eric 'shubes' Openwebmail is another one. JH - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] multibyte string function
One of our users is from Japan, and he is getting this error when he logs onto SquirrelMail. You need to have PHP installed with the multibyte string function enabled (using configure option --enable-mbstring). SquirrelMail Notice: I'm sure he's not the only one getting this message, but the only one that has reported it so far. I have around 80 users from others countries too, such as South Korea, and China. I know that this has to do with the language characters, so can someone point me in the right direction. How do I enable the mdstring in PHP? Are there any other configuration I need to be aware of? Thanks, John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] multibyte string function
John Hansen wrote: One of our users is from Japan, and he is getting this error when he logs onto SquirrelMail. You need to have PHP installed with the multibyte string function enabled (using configure option --enable-mbstring). SquirrelMail Notice: I'm sure he's not the only one getting this message, but the only one that has reported it so far. I have around 80 users from others countries too, such as South Korea, and China. I know that this has to do with the language characters, so can someone point me in the right direction. How do I enable the mdstring in PHP? Are there any other configuration I need to be aware of? Thanks, John Jake Vickers wrote: Probably only users with extended char stringsets are getting the message. Just yum install php-mbstring and restart apache. Jake, Awesome. Worked great. Thanks, John - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Bulk user import script works
The bulk user script does run as expected. My problem was that the original
script used $PASS, and the modified script uses $PASSWORD. I only made
modifications in my existing script instead of copying and pasting the entire
file in. So, here is the add bulk users script that does work importing users
and passwords in case someone else would like to use it. It's the same one
posted earlier. Sorry for the confusion. Thanks PakOgah for making the changes.
John
#!/bin/bash
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my toaster!
# Initial ideas come from a script that PakOgah pako...@pala.bo-tak.info
# helped me with.
# Still very manual, but Work in Progress
#
# Suggestions to akisa...@ucu.ac.ug
#
# Change a few variables and you are good to go
#
#
# Location of the users file
# Rememeber that the users file is in the format
# Firstname Lastname Username
USERS_FILE=/usr/local/file1.txt
# The mail domain to which users are created
#
MAILDOMAIN=@cotterschools.org
# the vadduser command
QMAILADD=/home/vpopmail/bin/vadduser
# Select a default password for all users
#PASS=mypass
#Specify the Default Quota_in_bytes for your Users
# 10 MB = 10 x 1024 x 1024
QUOTA=419430400
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read FIRSTNAME LASTNAME USERNAME PASSWORD
do
echo adding the user: $USERNAME
$QMAILADD -q $QUOTA -c $FIRSTNAME $LASTNAME $USERNAME$MAILDOMAIN
$PASSWORD
done
#
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Bulk user import script works
No encrypting necessary. Worked with plain text passwords that were in the file.
John
Eric wrote:
What's the word on how passwords need to be encoded? (Just for
posterity)
John Hansen wrote:
The bulk user script does run as expected. My problem was that the original
script used $PASS, and the modified script uses $PASSWORD. I only made
modifications in my existing script instead of copying and pasting the
entire
file in. So, here is the add bulk users script that does work importing
users
and passwords in case someone else would like to use it. It's the same one
posted earlier. Sorry for the confusion. Thanks PakOgah for making the
changes.
John
#!/bin/bash
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my toaster!
# Initial ideas come from a script that PakOgah pako...@pala.bo-tak.info
# helped me with.
# Still very manual, but Work in Progress
#
# Suggestions to akisa...@ucu.ac.ug
#
# Change a few variables and you are good to go
#
#
# Location of the users file
# Rememeber that the users file is in the format
# Firstname Lastname Username
USERS_FILE=/usr/local/file1.txt
# The mail domain to which users are created
#
MAILDOMAIN=@cotterschools.org
# the vadduser command
QMAILADD=/home/vpopmail/bin/vadduser
# Select a default password for all users
#PASS=mypass
#Specify the Default Quota_in_bytes for your Users
# 10 MB = 10 x 1024 x 1024
QUOTA=419430400
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read FIRSTNAME LASTNAME USERNAME PASSWORD
do
echo adding the user: $USERNAME
$QMAILADD -q $QUOTA -c $FIRSTNAME $LASTNAME $USERNAME$MAILDOMAIN
$PASSWORD
done
#
--
-Eric 'shubes'
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)Vickers Consulting Group offers
Qmailtoaster support and installations. If you need
professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
--- End of Original Message ---
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Bulk User Delete Script
For those that may be interested, here is a script that will delete bulk
users. Modified from the bulk user add script.
John
#!/bin/bash
#
# BULK USER DELETE FOR QMAIL TOASTER
#
# Modified from the Bulk User Adding script that PakOgah
pako...@pala.bo-tak.info
# helped to create with Alex Kisakye akisa...@ucu.ac.ug.
#
# Change a few variables and you are good to go
#
# Location of the users file
# The users file is in the format of just
# username
USERS_FILE=/your/path/file.txt
#
# The mail domain to which users are created
MAILDOMAIN=@yourdomain.com
#
# the vdeluser command
QMAILDEL=/home/vpopmail/bin/vdeluser
#
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read USERNAME
do
echo deleting user: $USERNAME
$QMAILDEL $USERNAME$MAILDOMAIN
done
#
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Bulk user import script
Hi PakOgah,
Thanks for modifying the script. However, when I run the script, it asks to
Please enter password for each user, then asks to re-enter the password for
confirmation, before going onto the next user. A step in the right direction,
but still would like to have the passwords added within the script.
So, still looking for the part where the users password is entered by the
script and not manually.
Thanks,
John
-- Original Message ---
From: PakOgah pako...@pala.bo-tak.info
To: John Hansen jhan...@winonacotter.org, qmailtoaster-list@qmailtoaster.com
Sent: Fri, 31 Jul 2009 11:38:32 +0700
Subject: Re: Bulk user import script
Halo John,
I am replied to qmailtoaster list so everyone can also use it as
reference for future use or correct me If I am making an error.
In your case, I have modified the script into below
===
#!/bin/sh
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my toaster!
# Initial ideas come from a script that PakOgah pako...@pala.bo-tak.info
# helped me with.
# Still very manual, but Work in Progress
#
# Suggestions to akisa...@ucu.ac.ug
#
# Change a few variables and you are good to go
#
#
# Location of the users file
# Rememeber that the users file is in the format
# Firstname Lastname Username Password
USERS_FILE=/path/to/file.txt
# The mail domain to which users are created
#
MAILDOMAIN=@domain.com
# the vadduser command
QMAILADD=/home/vpopmail/bin/vadduser
# Select a default password for all users
#PASS=mypass
#Specify the Default Quota_in_bytes for your Users
# 10 MB = 10 x 1024 x 1024
QUOTA=10485760
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read FIRSTNAME LASTNAME USERNAME PASSWORD
do
echo adding the user: $USERNAME
$QMAILADD -q $QUOTA -c $FIRSTNAME $LASTNAME
$USERNAME$MAILDOMAIN $PASSWORD
done
#
===
John Hansen wrote:
Hi,
I'm looking at using this script for a bulk user import, but the users have
passwords all ready, so I don't want to use the same default password for
everyone. What changes would I need in the script so I can use it with a
separate password for each user?
I was thinking the format for the users file could just include the extra
line
for the password.
Firstname Lastname Username Password
#!/bin/sh
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my toaster!
# Initial ideas come from a script that PakOgah pako...@pala.bo-tak.info
# helped me with.
# Still very manual, but Work in Progress
#
# Suggestions to akisa...@ucu.ac.ug
#
# Change a few variables and you are good to go
#
#
# Location of the users file
# Rememeber that the users file is in the format
# Firstname Lastname Username
USERS_FILE=/path/to/file.txt
# The mail domain to which users are created
#
MAILDOMAIN=@domain.com
# the vadduser command
QMAILADD=/home/vpopmail/bin/vadduser
# Select a default password for all users
PASS=mypass
#Specify the Default Quota_in_bytes for your Users
# 10 MB = 10 x 1024 x 1024
QUOTA=10485760
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read FIRSTNAME LASTNAME USERNAME
do
echo adding the user: $USERNAME
$QMAILADD -q $QUOTA -c $FIRSTNAME $LASTNAME $USERNAME$MAILDOMAIN
$PASS
done
#
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
--- End of Original Message ---
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Bulk user import script
Thanks. I'll try that. What type of encryption should I use?
John
Eric wrote:
If you run
# /home/vpopmail/bin/vadduser
you'll see the various options.
Looks like you need to use the -e flag with a password. This lets
you specify a standard_encrypted_password.
John, you'll need to have encrypted passwords to use this option.
John Hansen wrote:
Hi PakOgah,
Thanks for modifying the script. However, when I run the script, it asks to
Please enter password for each user, then asks to re-enter the password
for
confirmation, before going onto the next user. A step in the right
direction,
but still would like to have the passwords added within the script.
So, still looking for the part where the users password is entered by the
script and not manually.
Thanks,
John
-- Original Message ---
From: PakOgah pako...@pala.bo-tak.info
To: John Hansen jhan...@winonacotter.org,
qmailtoaster-list@qmailtoaster.com
Sent: Fri, 31 Jul 2009 11:38:32 +0700
Subject: Re: Bulk user import script
Halo John,
I am replied to qmailtoaster list so everyone can also use it as
reference for future use or correct me If I am making an error.
In your case, I have modified the script into below
===
#!/bin/sh
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my toaster!
# Initial ideas come from a script that PakOgah pako...@pala.bo-tak.info
# helped me with.
# Still very manual, but Work in Progress
#
# Suggestions to akisa...@ucu.ac.ug
#
# Change a few variables and you are good to go
#
#
# Location of the users file
# Rememeber that the users file is in the format
# Firstname Lastname Username Password
USERS_FILE=/path/to/file.txt
# The mail domain to which users are created
#
MAILDOMAIN=@domain.com
# the vadduser command
QMAILADD=/home/vpopmail/bin/vadduser
# Select a default password for all users
#PASS=mypass
#Specify the Default Quota_in_bytes for your Users
# 10 MB = 10 x 1024 x 1024
QUOTA=10485760
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read FIRSTNAME LASTNAME USERNAME PASSWORD
do
echo adding the user: $USERNAME
$QMAILADD -q $QUOTA -c $FIRSTNAME $LASTNAME
$USERNAME$MAILDOMAIN $PASSWORD
done
#
===
John Hansen wrote:
Hi,
I'm looking at using this script for a bulk user import, but the users
have
passwords all ready, so I don't want to use the same default password for
everyone. What changes would I need in the script so I can use it with a
separate password for each user?
I was thinking the format for the users file could just include the
extra line
for the password.
Firstname Lastname Username Password
#!/bin/sh
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my
toaster!
# Initial ideas come from a script that PakOgah pako...@pala.bo-tak.info
# helped me with.
# Still very manual, but Work in Progress
#
# Suggestions to akisa...@ucu.ac.ug
#
# Change a few variables and you are good to go
#
#
# Location of the users file
# Rememeber that the users file is in the format
# Firstname Lastname Username
USERS_FILE=/path/to/file.txt
# The mail domain to which users are created
#
MAILDOMAIN=@domain.com
# the vadduser command
QMAILADD=/home/vpopmail/bin/vadduser
# Select a default password for all users
PASS=mypass
#Specify the Default Quota_in_bytes for your Users
# 10 MB = 10 x 1024 x 1024
QUOTA=10485760
#Fun starts here No more variables to change below this line
cat ${USERS_FILE} | \
while read FIRSTNAME LASTNAME USERNAME
do
echo adding the user: $USERNAME
$QMAILADD -q $QUOTA -c $FIRSTNAME $LASTNAME $USERNAME$MAILDOMAIN
$PASS
done
#
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
--- End of Original Message ---
--
-Eric 'shubes'
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)Vickers Consulting Group offers
Qmailtoaster support and installations. If you need
professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department
Re: [qmailtoaster] Re: Bulk user import script
John Hansen wrote: Hi PakOgah, Thanks for modifying the script. However, when I run the script, it asks to Please enter password for each user, then asks to re-enter the password for confirmation, before going onto the next user. A step in the right direction, but still would like to have the passwords added within the script. So, still looking for the part where the users password is entered by the script and not manually. Thanks, John Constantin wrote: The first(s) line(s) of USERS_FILE not be empty ! Constantin Thanks Constantin. I double-checked and the first line of my USERS_FILE is not empty. John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Message not sent
Ganesh wrote: Dear John, Kindly check your /etc/tcprules.d/tcp.smtp and check that CHKUSER setting. if it is possible then paste your /etc/tcprules.d/tcp.smtp contain.. Regards, Ganesh On Thu, Jul 30, 2009 at 1:27 AM, John Hansen jhan...@winonacotter.orgwrote: Hi, I'm starting to do some testing on a new install. I set up a couple of test accounts and when I log into Squirrelmail and try to send an email from one test account to another on the same server in the same domain, I get this response just after hitting the send button. Message not sent. Server replied: Unknown response 571 sorry, sender address has invalid format (#5.7.1 - chkuser) Please advise. Thanks, John Hi, Contents of /etc/tcprules.d/tcp.smtp This is the default entry for the tcp.smtp file, I haven't changed it from the install only added the extra IP range from my network (10.) I was getting the error before I added the extra IP range. 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1 :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 10.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1 :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 Thanks, John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Message not sent
John Hansen wrote: Hi, I'm starting to do some testing on a new install. I set up a couple of test accounts and when I log into Squirrelmail and try to send an email from one test account to another on the same server in the same domain, I get this response just after hitting the send button. Message not sent. Server replied: Unknown response 571 sorry, sender address has invalid format (#5.7.1 - chkuser) Please advise. Thanks, John Eric wrote: If you show us the sender's address that would help. -- -Eric 'shubes' sender: t...@cotterschools.org recipient: test...@cotterschools.org The error message showed up in the senders window, not as an email, but as an error message immediately after hitting the send button. Both are test accounts I set up earlier. DNS is pointing internally. Let me know what else will help. Eric wrote: Which client program? You need to use the whole email address as the account name (including @cotterschools.org). Did you do so? -- -Eric 'shubes' Squirrelmail. No, I was only using the user name. When I went back and logged in using the whole email address, it worked. Thanks. -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Message not sent
John Hansen wrote: Ganesh wrote: Dear John, Kindly check your /etc/tcprules.d/tcp.smtp and check that CHKUSER setting. if it is possible then paste your /etc/tcprules.d/tcp.smtp contain.. Regards, Ganesh On Thu, Jul 30, 2009 at 1:27 AM, John Hansen jhan...@winonacotter.orgwrote: Hi, I'm starting to do some testing on a new install. I set up a couple of test accounts and when I log into Squirrelmail and try to send an email from one test account to another on the same server in the same domain, I get this response just after hitting the send button. Message not sent. Server replied: Unknown response 571 sorry, sender address has invalid format (#5.7.1 - chkuser) Please advise. Thanks, John Hi, Contents of /etc/tcprules.d/tcp.smtp This is the default entry for the tcp.smtp file, I haven't changed it from the install only added the extra IP range from my network (10.) I was getting the error before I added the extra IP range. 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1 :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 10.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1 :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 Thanks, John Eric wrote: 1) You shouldn't need to touch this file under most circumstances. You should only add your local network if you have an application that needs to submit messages but cannot authenticate. When this is the case, it's best to use a single IP address, not such a big range. This is a security risk. 2) The way you've specified it, the 2nd line will be true so your 3rd line will never take effect. The :allow... line should always be last. I would go back to the stock settings in this file, then redo cdb again. -- -Eric 'shubes' Thanks. I will do that. The settings for 127. are stock settings. I will remove the settings that start with 10., which are the lines I added. John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Message not sent
Hi, I'm starting to do some testing on a new install. I set up a couple of test accounts and when I log into Squirrelmail and try to send an email from one test account to another on the same server in the same domain, I get this response just after hitting the send button. Message not sent. Server replied: Unknown response 571 sorry, sender address has invalid format (#5.7.1 - chkuser) Please advise. Thanks, John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Message not sent
John Hansen wrote: Hi, I'm starting to do some testing on a new install. I set up a couple of test accounts and when I log into Squirrelmail and try to send an email from one test account to another on the same server in the same domain, I get this response just after hitting the send button. Message not sent. Server replied: Unknown response 571 sorry, sender address has invalid format (#5.7.1 - chkuser) Please advise. Thanks, John Eric wrote: If you show us the sender's address that would help. -- -Eric 'shubes' sender: t...@cotterschools.org recipient: test...@cotterschools.org The error message showed up in the senders window, not as an email, but as an error message immediately after hitting the send button. Both are test accounts I set up earlier. DNS is pointing internally. Let me know what else will help. -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Squirrel mail login
Jim Shupert wrote: I love this list -- i learn so much -- i have often wondered about the same thing... but what if one has 3 domains can you # vi /home/vpopmail/etc/defaultdomain mydomain1.com mydomain2.com mydomain3.com or -- for obvious reasons -- can there only be 1 default domain or , is it true that the usrs of mydomain.com ( only 1 line , 1 domain ) can simply use the usr while the usr of mydomain2 mydomain3 can still use web mail -- but have to submit their : u...@domain2.com. u...@domain3.com. thanks jS Another way maybe to set the domain in Squirrelmail. On my server I can execute /usr/share/squirrelmail/config/conf.pl and then select option 2 and then option 1 to set the domain. I think whatever this is set to will be the domain that is appended to the username on login by default. I can't remember for sure though. Make sure to select S for Save and then Q to quit when finished. See below: r...@server$/usr/share/squirrelmail/config/conf.pl SquirrelMail Configuration : Read: config.php (1.4.0) - Main Menu -- 1. Organization Preferences 2. Server Settings 3. Folder Defaults 4. General Options 5. Themes 6. Address Books 7. Message of the Day (MOTD) 8. Plugins 9. Database 10. Languages D. Set pre-defined settings for specific IMAP servers C Turn color on S Save data Q Quit Command 2 SquirrelMail Configuration : Read: config.php (1.4.0) - Server Settings General --- 1. Domain : example.com 2. Invert Time: false 3. Sendmail or SMTP : SMTP A. Update IMAP Settings : 127.0.0.1:143 (courier) B. Update SMTP Settings : localhost:25 R Return to Main Menu C Turn color on S Save data Q Quit Command 1 The domain name is the suffix at the end of all email addresses. If for example, your email address is j...@example.com, then your domain would be example.com. John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Squirrel mail login
From: Mahesh Bhat mahesh.b...@modelytics.com Hi All, When I login to my web login.. I need to put u...@domain.com and then the password.. is there a way to just use USER in the Section Username rather than u...@domain.com. -Regards Mahesh Bhat Try modifying /home/vpopmail/etc/defaultdomain. I found it in the QMT-ISO Manual Guide. Worked for me. /home/vpopmail/etc/defaultdomain default vpopmail's domain type domain name that will be the default for qmtiso if the domain name is listed here, no domain is needed for user authentication i.e. w/o /home/vpopmail/etc/defaultdomain users need to authenticate as u...@mycompany.com but with /home/vpopmail/etc/defaultdomain user only need to authenticate as user # vi /home/vpopmail/etc/defaultdomain mycompany.com John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Manual for CentQMT5
John Hansen wrote: In the wiki, it states to disable domainkeys, is this still the case? Disabling domainkeys disable domainkeys on qmtiso ver 1.2 somehow in this version domainkeys is still link to qmail need to disable it Disabling Domain Keys Thanks. You only need to disable it if you encounter problems with it. There really is not a lot of configuration you need to perform installing the ISO. Basically install it, add a domain, set your DNS up, and send email. Not much else should be configured unless you need additional functionality or have issues. Thank you. -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] script needed
I have converted from mbox to Maildir folders on my old server. I am moving the folders from my old mail server to my new mail server which is using Maildir with Qmailtoaster. The problem is my courierimapsubscribed file is unaware of the non-default folders the users have added themselves. I need a script that can look at all the files in my existing Maildir folder that do not match the default folders (ie .Sent, .Trash, .Drafts, cur, new, tmp, etc) and then append those file names to courierimapsubscribed so that my imap clients will recognize them. For example, say my user created a Maildir/.Folder1, I need the line INBOX.Folder1 appended to courierimapsubscribed. Can anyone help me come up with a script to do this? Thanks. -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] mbox to Maildir
Hi, My current mail system is using mbox, and I'll need to convert to Maildir. Any recommendations on a good conversion tool? Thanks, John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Manual for CentQMT5
Is there a QMT-ISO install manual for CentQMT5? I found the wiki, but it looks like it might be more for CentOS 4. http://wiki.qmailtoaster.com/index.php/QMT-ISO_Manual_Guide#Installation I have my server up using CentQMT5-1.2.0.iso, but now could use some direction on getting things properly configured. Thanks, John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] QmailToaster with LDAP
Eric Shubert wrote: Wait a minute. I might be going to sound like an idiot here, but I'll take that chance. LDAP is a protocol, not an implementation. You can implement LDAP with a mysql backend, can you not? If so, why couldn't you have a mysql database that serves both vpopmail and ldap at the same time? I guess it'd be a matter of mapping the database schemas together somehow. If the schemas could not be merged together (a good chance of that I expect, as the vpopmail database isn't normalized well at all), worse case scenario would be having to run a process periodically that maps one schema (probably ldap) on to the other (probably vpopmail). In that way, you could share authentication data like John is looking to do. Does this make any sense at all? It makes sense, but to make a couple points clear at this point in time, when you want LDAP for Qmail it then becomes an implementation. Sure, you could change the backend to serve both vpopmail and LDAP, but that would be a major rewrite if you wanted to use the same db for the backend. Can you tie them together? Sure. The database is just a bunch of information. How you pull that info and serve it for your app is up to you and is only limited by your imagination. I could see a daemon that pulled some data from a vpopmail database (either appending extra data to the DB entries since vpopmail will ignore the extra data anyway or using another DB tableset for this) that served it up in an LDAP format. Interesting idea really. What about building a script to populate the mysql backend upon creation of a new ldap user? I'm thinking the script would pull the information from the newest user and then use mysql commands to insert that info as a new record in mysql. But that might be harder than it sounds. Just a thought. -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] QmailToaster with LDAP
Hi, We currently authenticate our users with an LDAP server for different systems such as email and thin clients (LTSP). I would like to keep this same set up and not use a separate user database for QmailToaster, if possible. Most of our users use webmail, but there are around 20 that use an email client with POP3. Does anyone have a recommendation, one way or another, on using QmailToaster with LDAP? Pro's and cons? Tuturial? Thanks, John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Installation errors on CentOS 5.3 x86_64
Hi, I'm trying to install QmailToaster on CentOS 5, but I'm running into installation errors when running the cnt5064-install-script.sh script. I've have followed the step by step instructions found on the QmailToaster wiki for installing on CentOS_5. Server Specs: Dell T300 (new) CentOS 5.3 x86_64 (fresh install) Here is a list of the kind of errors I'm seeing. Please advise. 1) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.65670 (%build) error: File not found by glob: /usr/src/redhat/RPMS/x86_64/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/x86_64/qmail-pop3d*.rpm 2) Installing courier-authlib-toaster Installing courier-authlib-toaster-0.59.2-1.3.10.src.rpm error: Failed build dependencies: qmail-toaster = 1.03-1.3.15 is needed by courier-authlib-toaster-0.59.2-1.3.10.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/courier-authlib-toaster*.rpm 3) Installing courier-imap-toaster Installing courier-authlib-toaster-0.59.2-1.3.10.src.rpm error: Failed build dependencies: qmail-toaster = 1.03-1.3.15 is needed by courier-authlib-toaster-0.59.2-1.3.10.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/courier-authlib-toaster*.rpm 4) Installing courier-imap-toaster-4.1.2-1.3.10.src.rpm error: Failed build dependencies: courier-authlib-toaster is needed by courier-imap-toaster-4.1.2-1.3.10.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/courier-imap-toaster*.rpm 5) error: Failed dependencies: courier-imap-toaster = 4.1.2 is needed by control-panel-toaster-0.5-1.3.7.noarch 6) error: Failed dependencies: control-panel-toaster = 0.2 is needed by ezmlm-cgi-toaster-0.53.324-1.3.6.x86_64 7)Installing qmailadmin-toaster Installing qmailadmin-toaster-1.2.12-1.3.8.src.rpm error: Failed build dependencies: qmail-toaster = 1.03 is needed by qmailadmin-toaster-1.2.12-1.3.8.x86_64 ezmlm-toaster = 0.53.324 is needed by qmailadmin-toaster-1.2.12-1.3.8.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/qmailadmin-toaster*.rpm 8) Installing qmailmrtg-toaster-4.2-1.3.6.src.rpm error: Failed build dependencies: qmail-toaster = 1.03 is needed by qmailmrtg-toaster-4.2-1.3.6.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/qmailmrtg-toaster*.rpm 9) Installing maildrop-toaster-2.0.3-1.3.8.src.rpm error: Failed build dependencies: courier-imap-toaster is needed by maildrop-toaster-2.0.3-1.3.8.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/maildrop-toaster*.rpm 10) Installing isoqlog-toaster-2.1-1.3.7.src.rpm error: Failed build dependencies: qmail-toaster = 1.03 is needed by isoqlog-toaster-2.1-1.3.7.x86_64 control-panel-toaster = 0.2 is needed by isoqlog-toaster-2.1-1.3.7.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/isoqlog-toaster*.rpm 11) error: Failed dependencies: control-panel-toaster = 0.2 is needed by vqadmin-toaster-2.3.4-1.3.6.x86_64 12) Installing ripmime-toaster-1.4.0.6-1.3.6.src.rpm error: Failed build dependencies: qmail-toaster = 1.03-1.3.1 is needed by ripmime-toaster-1.4.0.6-1.3.6.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/ripmime-toaster*.rpm 13) Installing simscan-toaster-1.4.0-1.3.1.src.rpm error: Failed build dependencies: qmail-toaster = 1.03-1.2.4 is needed by simscan-toaster-1.4.0-1.3.1.x86_64 ripmime-toaster is needed by simscan-toaster-1.4.0-1.3.1.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/simscan-toaster*.rpm Thanks, John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Installation errors on CentOS 5.3 x86_64
Jake Vickers wrote: John Hansen wrote: Hi, I'm trying to install QmailToaster on CentOS 5, but I'm running into installation errors when running the cnt5064-install-script.sh script. I've have followed the step by step instructions found on the QmailToaster wiki for installing on CentOS_5. Server Specs: Dell T300 (new) CentOS 5.3 x86_64 (fresh install) Here is a list of the kind of errors I'm seeing. Please advise. 1) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.65670 (%build) error: File not found by glob: /usr/src/redhat/RPMS/x86_64/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/x86_64/qmail-pop3d*.rpm No need to go any further than this error since this is where it seems to have failed. Without seeing at least the last 25 lines of the failed build, it's hard to even guess why it didn't work out. Try running it manually: rpmbuild --rebuild --with cnt564 qmail-toaster-1.03-1.3.18.src.rpm And see why it fails. Welcome aboard, John. In order to know how best to assist you, it helps to know your level of expertise. How much linux experience do you have? Jake, That script should probably do some error checking, don't you think? ;) Perhaps using qtp-newmodel instead of the install script would be appropriate. John would already have the pertinent log in that case. :) -- -Eric 'shubes' Thanks for your replies. I have around 3yrs linux experience, mostly on the Ubuntu side. I have no formal training, and I'm not a programmer, but I'm comfortable with command line. Google is my friend for most trouble shooting issues. :-) Most of my servers are linux based. I did run the rpm seperate, and it did fail again. The command I used was: rpmbuild --rebuild --with cnt5064 qmail-toaster-1.03-1.3.18.src.rpm Here is the last few lines that were returned. Let me know if you need more. ./load qmail-dk triggerpull.o fmtqfn.o now.o \ date822fmt.o datetime.a seek.a ndelay.a open.a sig.a \ substdio.a error.a fs.a auto_qmail.o \ auto_split.o auto_uids.o fd.a wait.a \ /usr/lib64/libdomainkeys.a -lcrypto env.a control.o open.a getln.a \ stralloc.a alloc.a scan_ulong.o str.a `cat dns.lib` chmod 755 update_tmprsadh ./compile srsfilter.c srsfilter.c:83: warning: return type of 'main' is not 'int' srsfilter.c: In function 'main': srsfilter.c:96: warning: implicit declaration of function 'str_len' ./load srsfilter srs.o qmail.o strerr.a control.o rcpthosts.o constmap.o \ cdb.a case.a open.a stralloc.a alloc.a getln.a fd.a wait.a sig.a \ env.a substdio.a error.a str.a fs.a auto_qmail.o -lsrs2 nroff -man qmail-local.8 qmail-local.0 /bin/sh: nroff: command not found make: *** [qmail-local.0] Error 127 error: Bad exit status from /var/tmp/rpm-tmp.26371 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.26371 (%build) -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Installation errors on CentOS 5.3 x86_64
On Jun 25, 2009, at 10:28 AM, John Hansen wrote: nroff -man qmail-local.8 qmail-local.0 /bin/sh: nroff: command not found make: *** [qmail-local.0] Error 127 error: Bad exit status from /var/tmp/rpm-tmp.26371 (%build) there's your first problem. $ sudo yum -q provides '*/nroff' groff-1.18.1.1-11.1.i386 : A document formatting system. Matched from: Filename: /usr/bin/nroff $ `yum install groff` and try again :) Jake, perhaps you should add groff as a BuildRequires to the qmail- toaster SRPM? -steve Thanks. I installed groff, then ran the install script (cnt5064-install-script.sh). Still returned dependency errors, so I ran the rpm (rpmbuild --rebuild --with cnt5064 qmail-toaster-1.03-1.3.18.src.rpm) separately, and it installed without errors. So, I then ran the install script again, still returned dependency errors. It appears that the issue maybe with what the script is looking for and what's installed. For example, exim is looking for qmail-toaster, but qmail-toaster.x86_64 is what is installed. error: Failed dependencies: exim conflicts with qmail-toaster-1.03-1.3.18.x86_64 error: Failed dependencies: qmail-toaster = 1.03-1.3.18 is needed by qmail-pop3d-toaster-1.03-1.3.18.x86_64 Installing courier-authlib-toaster . . . Shall we continue? (yes, skip, quit) [y]/s/q: Installing courier-authlib-toaster-0.59.2-1.3.10.src.rpm error: Failed build dependencies: qmail-toaster = 1.03-1.3.15 is needed by courier-authlib-toaster-0.59.2-1.3.10.x86_64 error: File not found by glob: /usr/src/redhat/RPMS/x86_64/courier-authlib-toaster*.rpm Should I install each one independently? Should I revert back to CentOS 5 i386? Thanks. JH -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Installation errors on CentOS 5.3 x86_64
On Jun 25, 2009, at 12:12 PM, John Hansen wrote: error: Failed dependencies: exim conflicts with qmail-toaster-1.03-1.3.18.x86_64 here is your second problem; you have exim installed. as the error message says, exim conflicts with qmail-toaster. you need to uninstall it before you can continue. $ sudo yum remove exim as a general principle, look at the very first error that you encounter, and make sure you understand what it means before you proceed further; in this case, all the successive errors stemmed from the fact that you hadn't successfully installed the qmail- toaster package, and the error message i quoted explains why. -steve Steve and Eric, thanks for your help. I was not aware that exim needed to be uninstalled, only that there was a conflict. Thanks for pointing that out. After installing groff and removing exim, the install script ran without errors. Thanks again, I appreciate your insights. On to the next step in the install process. John -- This message has been scanned for viruses and dangerous content by the Cotter Technology Department, and is believed to be clean. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Bug in vpopmail-toaster-5.4.17 with disable-many-domains
Installed QMToaster to replace old hand-compiled toaster where email addresses
and domains were stored in a single MYSQL table. All worked but quickly
realized that QMToaster defaults to separate tables for each domain. Rebuilt
vpopmail-toaster-5.4.17 rpm after editing spec in two places:
vpopmail directory = /home/vpopmail
uid = 89
gid = 89
roaming users = ON --disable-roaming-users (default)
password learning = OFF --disable-learn-passwords (default)
md5 passwords = ON --enable-md5-passwords (default)
file locking = ON --enable-file-locking (default)
vdelivermail fsync = OFF --disable-file-sync (default)
make seekable = ON --enable-make-seekable (default)
clear passwd = ON --enable-clear-passwd (default)
user dir hashing = OFF --disable-users-big-dir
address extensions = ON --enable-qmail-ext
ip alias = OFF --disable-ip-alias-domains (default)
auth module = mysql --enable-auth-module=mysql
mysql replication = OFF --disable-mysql-replication (default)
sql logging = OFF --disable-sql-logging (default)
mysql limits = OFF --disable-mysql-limits (default)
MySQL valias = ON --enable-valias
auth inc = -I/usr/include/mysql
auth lib = -L/usr/lib64/mysql -lmysqlclient -lz -lm
system passwords = OFF --disable-passwd (default)
pop syslog = log success and errors including passwords
--enable-logging=v
auth logging = ON --enable-auth-logging (default)
one domain per SQL table = OFF --disable-many-domains
./configure --prefix=%{vdir} \
--enable-vpopuser=vpopmail \
--enable-vpopgroup=vchkpw \
--enable-libdir=%{mylibdir} \
--enable-roaming-users \
--enable-tcprules-prog=/usr/bin/tcprules \
--enable-tcpserver-file=/etc/tcprules.d/tcp.smtp \
--enable-make-seekable \
--enable-clear-passwd \
--disable-users-big-dir \
--enable-qmail-ext \
--disable-ip-alias-domains \
--enable-auth-module=mysql \
--disable-passwd \
--enable-logging=v \
--enable-log-name=vpopmail \
--disable-mysql-limits \
--enable-valias
# --disable-many-domains
make
Re-installed vpopmail RPM -uvh. Vpopmail now just creates one combined
vpopmail table for all domains. Also, all vpomail admin scripts in bin create
domains and users in this table and delete them. However, no email is accepted
for any domains. All are rejected 511 sorry, no mailbox here by that name
(#5.1.1 - chkuser). Qmail SMTP log file indicates that qmail is still
attempting to deliver incoming emails looking in separate tables for each
domain. Is this a bug or what do I need to do to correct this delivery issue?
Re: [qmailtoaster] Bug in vpopmail-toaster-5.4.17 with disable-many-domains
Should be obvious why I'd like to keep the new like the old -- any guesses? From: Jake Vickers j...@qmailtoaster.com To: qmailtoaster-list@qmailtoaster.com Sent: Monday, April 20, 2009 2:56:17 PM Subject: Re: [qmailtoaster] Bug in vpopmail-toaster-5.4.17 with disable-many-domains John Cole wrote: Installed QMToaster to replace old hand-compiled toaster where email addresses and domains were stored in a single MYSQL table. All worked but quickly realized that QMToaster defaults to separate tables for each domain. Rebuilt vpopmail-toaster-5.4.17 rpm after editing spec in two places: Not a bug. This is the way it's set up. Re-installed vpopmail RPM -uvh. Vpopmail now just creates one combined vpopmail table for all domains. Also, all vpomail admin scripts in bin create domains and users in this table and delete them. However, no email is accepted for any domains. All are rejected 511 sorry, no mailbox here by that name (#5.1.1 - chkuser). Qmail SMTP log file indicates that qmail is still attempting to deliver incoming emails looking in separate tables for each domain. Is this a bug or what do I need to do to correct this delivery issue? So you changed the setup that works, and now it's broke. This should tell you whats wrong. If you change the configuration back to the way it supposed to be, chkuser will be able to function again. Or you if you must change the vpopmail config you'll also need to edit the qmail-toaster config and remove the chkuser settings/patch. I cannot think of any other packages you would need to edit, but that does not mean there will not be some more problems. The patches/configuration used with the Qmailtoaster packages you downloaded are tried and true.
Re: [qmailtoaster] Bug in vpopmail-toaster-5.4.17 with disable-many-domains
A long time ago in a galaxy far away separate domain tables was not an option with vpopmail in mysql. That's the reason it's set up the way it is. This should give you an idea of how long this old qmail install has been running without issues with lots of domains and accounts. Just trying to get r done (upgraded) as easily/quickly as possible. Thanks for the assist. From: Jake Vickers j...@qmailtoaster.com To: qmailtoaster-list@qmailtoaster.com Sent: Monday, April 20, 2009 3:08:51 PM Subject: Re: [qmailtoaster] Bug in vpopmail-toaster-5.4.17 with disable-many-domains John Cole wrote: Should be obvious why I'd like to keep the new like the old -- any guesses? No guesses - I explained what you would need to start with in my last message. You probably won't find a how-to to do this with QMT, since QMT was packaged to run a specific way. If you change how it runs you run the risk of causing components to no longer work (as you see for yourself) and are better off going back to your hand-compiled method since it will be less work in the long run than have to constantly chase issues that arise from changing the package functionality. Just my 2-cents.
[qmailtoaster] list bounces sent to moderator?
Is there a way to route bounced emails from a list to a specific address? I see a 'bouncer' file in the vpopmail directory for that list... but adding an email address to the file or a |/var/qmail/bin/qmail-inject doesn't work. The point is I have a moderator who wants to receive the bounces so he can be proactive in asking for an updated email address from a user instead of letting them fall off the list silently. Thanks, John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] duplicate emails
I recently posted a message about this and found a solution but with negative effects. I determined that only one email address was receiving duplicate emails. I found that by moving that account's .qmail file out of the way the duplicates stopped. Here's the contents of .qmail: |/var/qmail/bin/preline /usr/bin/maildrop -A 'Content-Filter: maildrop-toaster' /etc/mail/mailfilter /home/vpopmail/domains/boubion.com/dominic/Maildir/ Don't I need this for the spambox I set up? Memory and server loads are pretty consistent as not much has changed on this server in recent months so I don't think this is a RAM issue as has been suggested in other threads. Only odd thing is the timestamp on .qmail for the user is April 30th. I looked back in my trash can and can easily see the duplicates started after the file was modified. To be honest I don't remember what I might have done to modify the file. spamassassin-toaster-3.1.8-1.3.8 clamav-toaster-0.93-1.3.18 Thanks, John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] yahoo and aol bouncing email due to user complaints
I host a tiny ezmlm list (100 subscribers) and several members have asked why they're getting messages from the list saying messages have been bouncing and if they continue to bounce they'll be removed from the list. A few weeks ago I discovered that yahoo has been deferring emails to the list due to user complaints. It doesn't seem to happen when I send an email to a single yahoo user, just list-related. Now it has come to my attention that aol is bouncing emails to the list due to user complaints or too much email. One bounce was dated April 12. This is a very low volume list. A few days ago I started getting duplicate emails. I've read some threads on that and RAM seems to be a culprit. I have not upgraded lately and memory levels have been pretty consistent for some time. Never been a problem in the past year. Also two days ago logwatch reported yum updates/installs/uninstalls of packages and I did not initiate this activity. That has me thinking hacker. I know this is a fruit salad of issues but I'm including them in case they could be related. Any advice on how to approach these problems and in what order would be appreciated. John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] PROBLEMAS CON SERVIDOR - PROBLEMS WITH SERVER
INGLES Hello list, I hope I can help, I have my server with messages qmailtoaster but lately it take to get there, and is beginning to get much spam mails to users who do not exist, and I have reviewed the following meeting. ESPAÑOL hola lista, espero me pueda ayudar, tengo mi servidor con qmailtoaster pero ultimamente los mensajes se demoran para llegar, y esta empezando a llegar mucho spam, correos a usuarios que no existen, he revisado y encuentro lo siguiente. qmails8390 8389 0 18:48 pts/000:00:00 qmail-send root 8391 8388 0 18:48 pts/000:00:00 supervise log root 8393 8388 0 18:48 pts/000:00:00 supervise smtp root 8400 8388 0 18:48 pts/000:00:00 supervise log qmaill8401 8400 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/smtp root 8407 8388 0 18:48 pts/000:00:00 supervise log qmaill8408 8407 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/submission root 8409 8388 0 18:48 pts/000:00:00 supervise pop3 root 8411 8390 0 18:48 pts/000:00:00 qmail-lspawn ./Maildir/ qmailr8412 8390 0 18:48 pts/000:00:00 qmail-rspawn qmailq8413 8390 0 18:48 pts/000:00:00 qmail-clean root 8415 8388 0 18:48 pts/000:00:00 supervise log qmaill8416 8415 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/pop3 root 8419 8388 0 18:48 pts/000:00:00 supervise authlib root 8420 8419 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8424 8388 0 18:48 pts/000:00:00 supervise log qmaill8425 8424 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/authlib root 8427 8388 0 18:48 pts/000:00:00 supervise imap4 root 8428 8427 0 18:48 pts/000:00:00 /usr/bin/tcpserver -v -R -H -l servidordecorreo 0 143 /usr/sbin/imaplogin /usr/bin/imapd Maildir root 8429 8388 0 18:48 pts/000:00:00 supervise log qmaill8430 8391 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/send qmaill8438 8429 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/imap4 root 8439 8388 0 18:48 pts/000:00:00 supervise imap4-ssl root 8440 8439 0 18:48 pts/000:00:00 /usr/bin/tcpserver -v -R -H -l servidordecorreo 0 993 /usr/bin/couriertls -server -tcpd /usr/sbin/im root 8445 8388 0 18:48 pts/000:00:00 supervise log qmaill8446 8445 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/imap4-ssl root 8449 8388 0 18:48 pts/000:00:00 supervise pop3-ssl root 8450 8449 0 18:48 pts/000:00:00 /usr/bin/tcpserver -v -R -H -l servidordecorreo 0 995 /usr/bin/couriertls -server -tcpd /usr/sbin/po root 8452 8388 0 18:48 pts/000:00:00 supervise log qmaill8453 8452 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/pop3-ssl root 8454 8388 0 18:48 pts/000:00:00 supervise spamd root 8414 8409 0 18:48 pts/000:00:00 /usr/bin/tcpserver -v -R -c 200 0 110 /var/qmail/bin/qmail-popup servidordecorreo /home/vpopmail/bin root 8461 8454 0 18:48 pts/000:00:01 /usr/bin/perl -T -w /usr/bin/spamd -x -u vpopmail -s stderr root 8462 8388 0 18:48 pts/000:00:00 supervise log qmaill8463 8462 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/spamd root 8466 8388 0 18:48 pts/000:00:00 supervise clamd clamav8467 8466 26 18:48 pts/000:10:14 /usr/sbin/clamd root 8468 8388 0 18:48 pts/000:00:00 supervise log qmaill8469 8468 0 18:48 pts/000:00:00 /usr/bin/multilog t s100 n100 /var/log/qmail/clamd root 8473 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8474 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8475 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8476 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8477 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8478 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8479 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8480 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8481 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8482 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8489 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8490 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8491 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond root 8492 8420 0 18:48 pts/000:00:00 /usr/lib/courier-authlib/authdaemond
Re: [qmailtoaster] mail not being delivered to all users
Thanks Ben. Do I need rDNS entries for each domain name hosted on this server or just the one for the actual hostname? John Ben Mills wrote: John, You need to have your ISP set your rDNS to emerald.boubion.com . Many MTAs won't accept messages from foreign hosts that have unresolvable rDNS or an rDNS which contains an IP. Ben John wrote: I manage an ezmlm list via qmailtoaster for a non-profit and I'm getting reports that not all users are receiving emails from the list. I've checked the dns report for the specific domain name and no problems. This may be getting off topic but I'm trusting many of you have lots of experience with DNS and rDNS: if I lookup the IP address on dnstuff.com I get this: IP address: 65.111.170.76 Reverse DNS:76-170-111-65.serverpronto.com. Reverse DNS authenticity: [Could be forged: hostname 76-170-111-65.serverpronto.com. does not exist] I use everydns.net for DNS hosting. Should I add this server name to the list? Or do I need to coordinate with serverpronto on that? FYI I've already checked the common blacklists and this IP isn't listed, although Earthlink informed me that they may have been blocking it if my IP address was previously used by spammers. On that subject, I thought rbl checks were done in real-time? John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] mail not being delivered to all users
I manage an ezmlm list via qmailtoaster for a non-profit and I'm getting reports that not all users are receiving emails from the list. I've checked the dns report for the specific domain name and no problems. This may be getting off topic but I'm trusting many of you have lots of experience with DNS and rDNS: if I lookup the IP address on dnstuff.com I get this: IP address: 65.111.170.76 Reverse DNS:76-170-111-65.serverpronto.com. Reverse DNS authenticity: [Could be forged: hostname 76-170-111-65.serverpronto.com. does not exist] I use everydns.net for DNS hosting. Should I add this server name to the list? Or do I need to coordinate with serverpronto on that? FYI I've already checked the common blacklists and this IP isn't listed, although Earthlink informed me that they may have been blocking it if my IP address was previously used by spammers. On that subject, I thought rbl checks were done in real-time? John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] incorrectly flagged as spam
I know about whitelisting but am wondering if there are other thoughts or suggestions regarding this issue: An email thread sent to me was flagged as spam and it isn't. It's a very innocent email in it's text. Here's the last reply: Teri, Please send us a screener at the address listed below. Thanks for contacting us and being patient. There were a few replies below this one. The header shows this: X-Spam-Status: Yes, score=5.0 required=5.0 tests=DK_POLICY_SIGNSOME, EXTRA_MPART_TYPE,HTML_MESSAGE,HTML_TAG_EXIST_TBODY,PART_CID_STOCK, PART_CID_STOCK_LESS,TVD_FW_GRAPHIC_ID1 autolearn=no version=3.1.8 X-Spam-Report: * 0.8 EXTRA_MPART_TYPE Header has extraneous Content-type:...type= entry * 0.0 DK_POLICY_SIGNSOME Domain Keys: policy says domain signs some mails * 2.1 TVD_FW_GRAPHIC_ID1 BODY: TVD_FW_GRAPHIC_ID1 * 0.1 HTML_TAG_EXIST_TBODY BODY: HTML has tbody tag * 0.0 HTML_MESSAGE BODY: HTML included in message * 1.0 PART_CID_STOCK Has a spammy image attachment (by Content-ID) * 1.0 PART_CID_STOCK_LESS Has a spammy image attachment (by Content-ID, * more specific) The graphic is actually a few graphics embedded in the original newsletter that started the thread (HTML plus plain text versions sent). Suggestions? I'd like to focus more on the newsletter (which comes from teh same server) since that seems to be the biggest contributor. I'd also like to know if there is a way to train qmailtoaster that an email is not spam from the command line (I think I read this a while back and can't find it). If so, what would that syntax look like? John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] problem SPAM
HELLO i have a problem with spam messages, the problem is that messages of Spam arrive sent from my own dominion to my own accounts. a virus in some of my clients or my server ? thansk - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] AYUDA SCRIPT HELP SCRIPT
buenos días para toda la lista, tengo una serie de dudas y no veo como resolverlas, necesito crear un filtro de mail, he intentado con scripts de bash y no meda, he intentado con un script en php pero se me ha dificultado mesclarlo con qmail, con bash ejecuto la siguiente guuion que pienso deberia funciona y no funciona #!/bin/bash // Cargo el contenido del mensaje me funciona bien CONTENT=`(cat)` // Hago una busqueda de una cadena en los diferentes encabezados del mensaje y no me devuelve nada VAR=$(echo $CONTENT | grep -x '^Received-SPF: pass') // Escrivo el contenido de la variable VAR en un archivo echo $VAR archivo.log /// good morning for all the list, I have a series of doubts and I do not see like solving them, I need to create a mail filter, have tried with scripts of bash and not meda, I have tried with script in php but one has become difficult to me to mesclar it with qmail, with bash I execute following guuion that I think deberia works and it does not work #!/bin/bash //Position the content of the message works CONTENT=`(cat)` //I make a headed search of a chain in the different ones from the message and well to me VAR=$(echo $CONTENT | grep -x '^Received-SPF: pass') //Escrivo the content of variable VAR in a file echo $VAR archivo.log - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Mi servidor re chaza mis envíos
Richard Ramírez escribió:
!DOCTYPE html PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
html
head
meta content=text/html;charset=ISO-8859-1 http-equiv=Content-Type
/head
body bgcolor=#ff text=#00
Yo teniacute;a el mismo problema, lo que hice fue desactivar esa
opcioacute;n en b/var/qmail/control/blacklists
/bya que mis usuarios se conectaban desde su casa y al parecer el
rango de ip's del proveedor estaba en lista negra.br
div class=moz-signature
meta http-equiv=Content-Type content=text/html;
meta name=ProgId content=Word.Document
meta name=Generator content=Microsoft Word 11
meta name=Originator content=Microsoft Word 11
link rel=File-List href=firma_archivos/filelist.xml
titleSaludos,/title
!--[if gte mso 9]xml
o:DocumentProperties
o:AuthorFco/o:Author
o:LastAuthorFco/o:LastAuthor
o:Revision4/o:Revision
o:TotalTime2/o:TotalTime
o:Created2007-09-06T22:49:00Z/o:Created
o:LastSaved2007-09-21T16:40:00Z/o:LastSaved
o:Pages1/o:Pages
o:Words49/o:Words
o:Characters270/o:Characters
o:CompanyGC/o:Company
o:Lines2/o:Lines
o:Paragraphs1/o:Paragraphs
o:CharactersWithSpaces318/o:CharactersWithSpaces
o:Version11.5606/o:Version
/o:DocumentProperties
/xml![endif]--!--[if gte mso 9]xml
w:WordDocument
w:GrammarStateClean/w:GrammarState
w:HyphenationZone21/w:HyphenationZone
w:PunctuationKerning/
w:ValidateAgainstSchemas/
w:SaveIfXMLInvalidfalse/w:SaveIfXMLInvalid
w:IgnoreMixedContentfalse/w:IgnoreMixedContent
w:AlwaysShowPlaceholderTextfalse/w:AlwaysShowPlaceholderText
w:Compatibility
w:BreakWrappedTables/
w:SnapToGridInCell/
w:WrapTextWithPunct/
w:UseAsianBreakRules/
w:DontGrowAutofit/
/w:Compatibility
w:BrowserLevelMicrosoftInternetExplorer4/w:BrowserLevel
/w:WordDocument
/xml![endif]--!--[if gte mso 9]xml
w:LatentStyles DefLockedState=false LatentStyleCount=156
/w:LatentStyles
/xml![endif]--
style
!--
/* Font Definitions */
@font-face
{font-family:Book Antiqua;
panose-1:2 4 6 2 5 3 5 3 3 4;
mso-font-charset:0;
mso-generic-font-family:roman;
mso-font-pitch:variable;
mso-font-signature:647 0 0 0 159 0;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{mso-style-parent:;
margin:0cm;
margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:12.0pt;
font-family:Times New Roman;
mso-fareast-font-family:Times New Roman;}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;
text-underline:single;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;
text-underline:single;}
@page Section1
{size:595.3pt 841.9pt;
margin:70.85pt 3.0cm 70.85pt 3.0cm;
mso-header-margin:35.4pt;
mso-footer-margin:35.4pt;
mso-paper-source:0;}
div.Section1
{page:Section1;}
--
/style!--[if gte mso 10]
style
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Tabla normal;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:;
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:Times New Roman;
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
/style
![endif]--
div class=Section1
p class=MsoNormalspan
style=font-size: 10pt; font-family: quot;Book
Antiquaquot;;o:pnbsp;/o:p/span/p
p class=MsoNormalspan
style=font-size: 10pt; font-family: quot;Book
Antiquaquot;;o:pnbsp;/o:p/span/p
p class=MsoNormalspan
style=font-size: 10pt; font-family: quot;Book
Antiquaquot;;Saludos,/spanspan
style=font-size: 10pt; font-family: Arial;o:p/o:p/span/p
p class=MsoNormalspan style=font-size: 10pt; font-family:
Arial;nbsp;o:p/o:p/span/p
p class=MsoNormalspan
style=font-size: 10pt; font-family: quot;Book
Antiquaquot;;Richard Ramiacute;rez
Ortiz/spanspan style=font-size: 10pt; font-family:
Arial;o:p/o:p/span/p
p class=MsoNormalstrongspan
style=font-size: 10pt; font-family: quot;Book
Antiquaquot;;Aacute;rea de Sistemas/span/strongspan
style=font-size: 10pt; font-family: Arial;a
href=blocked::mailto:[EMAIL PROTECTED]/ao:p/o:p/span/p
/div
/div
br
br
Ariel escribioacute;:
blockquote
cite=mid:[EMAIL PROTECTED]
type=cite
pre wrap=Ese error te lo esta dando la RBL , o sea el chequeo
contra las listas negras.
Esa ip que intentas enviarle esta en lista negra.
El 17/11/07, ArcosCom Linux User a class=moz-txt-link-rfc2396E
href=mailto:[EMAIL PROTECTED]lt;[EMAIL PROTECTED]gt;/a
escribioacute;:
/pre
blockquote type=cite
pre wrap=Mirando en:
a class=moz-txt-link-freetext
href=http://www.spamhaus.org/query/bl?ip=84.123.238.233;http://www.spamhaus.org/query/bl?ip=84.123.238.233/a
Veo que configurando mi cliente para que use el puerto 587 en vez del 25
funciona bien ahora.
iquest;A queacute; se debe este cambio de un diacute;a para otro?
iquest;Alguien tiene alguna
explicacioacute;n al respecto?
Salu2
El Dom, 18 de Noviembre de
[qmailtoaster] Change language
Hola alguien me puede explicar como cambio el idioma del squirrelmail, deseo pasarlo todo a español Hello somebody the language of the squirrelmail can explain me like change, desire to pass it everything to Spanish
[qmailtoaster] PROBLEM SMTP
Hello a ihave a problem El mensaje no se pudo enviar, uno de los destinatarios fue rechazado por el servidor. Su dirección de correo electrónico es [EMAIL PROTECTED]. Asunto 'saludo', Cuenta: 'Orlando Gaviria', Servidor: '201.236.220.3', Protocolo: SMTP, Respuesta del servidor: '451 http://www.spamhaus.org/query/bl?ip=190.25.81.6', Puerto: 25, Seguridad (SSL): No, Error de servidor: 451, Número de error: 0x800CCC79 Not listen in spamhaus, and have check My server required authentication *** EN ESPAÑOL Hola tengo varios clients externos y algunos funcionan bien pero hay otros que cuando intentan enviar mail me aparece el siguiente error El mensaje no se pudo enviar, uno de los destinatarios fue rechazado por el servidor. Su dirección de correo electrónico es [EMAIL PROTECTED]. Asunto 'saludo', Cuenta: 'Orlando Gaviria', Servidor: '201.236.220.3', Protocolo: SMTP, Respuesta del servidor: '451 http://www.spamhaus.org/query/bl?ip=190.25.81.6', Puerto: 25, Seguridad (SSL): No, Error de servidor: 451, Número de error: 0x800CCC79 La direccion ip no esta en listas negras de spam y tengo chequeado la opcion de miy servidor requiere autenticación Que puedo hacer Agradezco la ayuda, estoy comenzando con un servidor toaster Att. john
[qmailtoaster] freshclam error
Hi, guys I 'm newbie with qmailtoaster. I was installed qmailtoaster on centos 4.4 and it's was working properly. But I have litle problem, freshclam can't update clamav. I saw freshclam.log: ERROR can't download daily.cvd from database.clamav.net giving up on database.clamav.net... Update failed. Your network maybe down or none of the mirrors listed in freshclam.conf check... can any body advise me how to fix it? Thanks John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] logwatch for qmail
I am a newbie when it comes to logwatch. I see the scripts for qmail in the logwatch directory structure, and logwatch.conf indicates Service = All. I am not receiving a report section on qmail in the nightly logwatch emails. How do I enable this? Thanks, John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] clamd memory hog at 104MB
Am running newest Qmailtoaster components, including ClamAV v0.90.1, which takes 104MB of memory. Any suggestions on how to reduce this memory footprint? It's currently the biggest hog on the box, totally out of control if you ask me. Have not customized it, so this is out of the Qmailtoaster box. Thanks, John B - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] clamd memory hog at 104MB
A M wrote: that's about right... spamd+clamd together take about 160MB (60 for spamd + 100 for clamd) these are about average for my systems. 2007/7/12, John [EMAIL PROTECTED]: Am running newest Qmailtoaster components, including ClamAV v0.90.1, which takes 104MB of memory. Any suggestions on how to reduce this memory footprint? It's currently the biggest hog on the box, totally out of control if you ask me. Have not customized it, so this is out of the Qmailtoaster box. Thanks, John B - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Thanks for the sanity check. I just stopped and started qmailtoaster and now clamd shows 34MB. Then I sent an email with PDF attachment from an external account to an existing user and clamd jumps to 44MB. I'll keep an eye on this and see if it gets out of control, which might indicate a memory leak...? John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] clamd memory hog at 104MB
Eric Pierce wrote: I'd be surprised if that were the case. The last time my Qmailtoaster box rebooted was 86 days ago (due to a power issue at the colo), and I have no stability or memory problems. For comparison's sake, I host email for about 35 domains -- never have any issues. Regards, Eric -Original Message- From: John [mailto:[EMAIL PROTECTED] Sent: Thursday, July 12, 2007 1:21 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] clamd memory hog at 104MB A M wrote: that's about right... spamd+clamd together take about 160MB (60 for spamd + 100 for clamd) these are about average for my systems. 2007/7/12, John [EMAIL PROTECTED]: Am running newest Qmailtoaster components, including ClamAV v0.90.1, which takes 104MB of memory. Any suggestions on how to reduce this memory footprint? It's currently the biggest hog on the box, totally out of control if you ask me. Have not customized it, so this is out of the Qmailtoaster box. Thanks, John B - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Thanks for the sanity check. I just stopped and started qmailtoaster and now clamd shows 34MB. Then I sent an email with PDF attachment from an external account to an existing user and clamd jumps to 44MB. I'll keep an eye on this and see if it gets out of control, which might indicate a memory leak...? John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Here's proof (rising to 52MB just since my last post): # ps aux |grep clam clamav1967 0.0 0.2 5756 1380 ?Ss Jul10 0:00 usr/bin/freshclam -d -p /var/run/clamav/freshclam.pid root 27817 0.0 0.0 1492 236 pts/0S10:03 0:00 supervise clamd clamav 27825 2.1 7.2 52080 35960 pts/0S10:03 1:18 /usr/sbin/clamd qmaill 27827 0.0 0.0 1508 232 pts/0S10:03 0:00 /usr/bin/multilog t s100 n100 /var/log/qmail/clamd root 28869 0.0 0.1 3880 680 pts/0R+ 11:04 0:00 grep clam - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Adding mass user to mailing list
[EMAIL PROTECTED] wrote: Hello, I need to add many users to the mailing list in my toaster installation. From googling I found this script: 1. Make a text file containing: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] 2. Make the mailing list using qmailadmin 3. Then inject the user from email.txt: for i in `cat email.txt` do /usr/bin/ezmlm-sub /home/vpopmail/domains/yourdomain.com/yourmaillist $i done Will that work? Especially I'm not sure whether it will be stored in mysql database or not. Thank you very much. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] I'm fairly certain you need to install ezmlm with the MySQL option if you want the info stored that way. By default qmailtoaster stores the info in text files located in /home/vpopmail/domains/yourdomain.com/yourlistname/subscribers. You could also do cat mylist.txt | /usr/bin/ezmlm-sub full_path_to_your_list Either way I suggest creating a test list for these kinds of exercises. After you are done you can use /usr/bin/ezmlm-list full_path_to_your_list to verify it works as expected, or ezmlm-list -n full_path_to_list which gives the number of subscribers. You don't really want to learn on a live list... John P.s. This manual subscription method also skips the confirmation email normally sent to new subscribers... - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Squirrelmail - You must be logged in to access this page.
Last week I re-installed the server with CentOS 5, PHP 5.1.6, Apache 2.2.3, and the current release of Qmailtoaster (Squirrelmail 1.4.9a). After logging in to Squirrelmail, all links produce the error message, You must be logged in to access this page. Initially, I can see the list of mail in my inbox. Following any hyperlinks gives above error. I have read all the suggestions on squirrelmail.org regarding cookies, php.ini settings, etc. Nothing works, and problem persists in multiple browsers. No help from squirrelmail list. Upgrading manually to SM 1.4.10a solves the problem, but my mailboxes get duplicated and slighly mangled (which I think I can fix), and also the % of xMB in the left frame at the top is missing. I assume that's Qmailtoaster specific. Any suggestions on how to fix the original error under SM 1.4.9a, or help on how to get the % of xMB put back after upgrade would be appreciated. Thanks, John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] migrate vpopmail db
Hello, I recently upgraded to CentOS 5 and am rebuilding qmailtoaster. Will I need to formally recreate users using vaddomain and vadduser or can I just repopulate the vpopmail database (mysql) using mysql -uroot -p vpopmail vpopmaildump.sql? thanks, john - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] vpopmail reistalled now can't connect to servers
I believe it is.. I can create new e-mail accounts and so on.. but I can't seem to connect to the server with my thunderbird or squirrelmail.. when I try to connect with squirrelmail I get this error message: * ERROR: Connection dropped by IMAP server. *when I try to connect with thunderbird I get this message: sending of password did not succeed. authorization failed.. thanks again.. Minnesota Webworks Janno Sannik wrote: Do you have the basic vpopmail sql table in place (containing aliases table for example). is database user correctly configured in /home/vpopmail/etc/vpopmail.mysql according to mysql db itself? John Carlson wrote: OK so I was looking around last night at my server.. using webmin and I was updating some sites. I wanted to remove a table for an old site in the vpopmail database well when I deleted the table it actually deleted the whole vpopmail database. NO BACKUP... it is a fairly new install... anyway.. so I did some looking and I seen that the easiest way to get the vpopmail database back was to just re-install vpopmail.. so I removed vpopmail and then re-installed it.. I had to create the vpopmail:vchkpw user and group.. and everything seems to be in order.. but now I can't connect to the pop server.. or use squirrelmail.. so does anyone have any ideas how I can fix it without having to re-install the whole qmailtoaster system.. thanks in advance.. John -- Minnesota Webworks - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] vpopmail reistalled now can't connect to servers
when I ran the RPM it created the database for me again.. and the user was still there. in mysql.. so I don't think that was the problem.. but I'm not sure.. I'll try what you have here.. thanks. Minnesota Webworks Jake Vickers wrote: John Carlson wrote: OK so I was looking around last night at my server.. using webmin and I was updating some sites. I wanted to remove a table for an old site in the vpopmail database well when I deleted the table it actually deleted the whole vpopmail database. NO BACKUP... it is a fairly new install... anyway.. so I did some looking and I seen that the easiest way to get the vpopmail database back was to just re-install vpopmail.. so I removed vpopmail and then re-installed it.. I had to create the vpopmail:vchkpw user and group.. and everything seems to be in order.. but now I can't connect to the pop server.. or use squirrelmail.. so does anyone have any ideas how I can fix it without having to re-install the whole qmailtoaster system.. mysqladmin create vpopmail -uroot -p mysqladmin -uroot -p reload mysqladmin -uroot -p refresh echo GRANT ALL PRIVILEGES ON vpopmail.* TO [EMAIL PROTECTED] IDENTIFIED BY 'SsEeCcRrEeTt' | mysql -uroot -p mysqladmin -uroot -p reload mysqladmin -uroot -p refresh Then reinstall vpopmail. You dropped the whole database, and the vpopmail RPM doesn't create it - that was covered in the installation script.
Re: [qmailtoaster] vpopmail reistalled now can't connect to servers
ok, I tried the mysqladmin stuff.. and that didn't change it.. then I did a test (telnet domain.com 25) and sent an e-mail and that worked.. so I'm not sure what is going on here.. it doesn't make any sense to me.. unless there is some config that I am missing.. because squirrelmail only seems to give me the error when I have a correct e-mail address.. otherwise it tells me that I have an incorrect user .. so something is happening with the password I think.. not sure what it is... thanks, Minnesota Webworks Jake Vickers wrote: John Carlson wrote: I believe it is.. I can create new e-mail accounts and so on.. but I can't seem to connect to the server with my thunderbird or squirrelmail.. when I try to connect with squirrelmail I get this error message: * ERROR: Connection dropped by IMAP server. *when I try to connect with thunderbird I get this message: sending of password did not succeed. authorization failed. Does SMTP work? IMAP problems can be related to DNS.
Re: [qmailtoaster] vpopmail reistalled now can't connect to servers
I did notice another thing.. my uid and gid for vpopmail and vchkpw are both 89.. but in the config.h file in the /home/vpopmail/includes directory.. the #define VPOPMAILUID 510 and same for VPOPMAILGID .. so I'm not sure if this is significant Minnesota Webworks John Carlson wrote: ok, I tried the mysqladmin stuff.. and that didn't change it.. then I did a test (telnet domain.com 25) and sent an e-mail and that worked.. so I'm not sure what is going on here.. it doesn't make any sense to me.. unless there is some config that I am missing.. because squirrelmail only seems to give me the error when I have a correct e-mail address.. otherwise it tells me that I have an incorrect user .. so something is happening with the password I think.. not sure what it is... thanks, Minnesota Webworks Jake Vickers wrote: John Carlson wrote: I believe it is.. I can create new e-mail accounts and so on.. but I can't seem to connect to the server with my thunderbird or squirrelmail.. when I try to connect with squirrelmail I get this error message: * ERROR: Connection dropped by IMAP server. *when I try to connect with thunderbird I get this message: sending of password did not succeed. authorization failed. Does SMTP work? IMAP problems can be related to DNS.
Re: [qmailtoaster] vpopmail reistalled now can't connect to servers
here is what my /var/log/maillog file sais: May 22 09:47:14 fergusfalls vpopmail[5923]: vchkpw-pop3: (PLAIN) login success [EMAIL PROTECTED]:192.168.1.251 May 22 09:47:14 fergusfalls vpopmail[5923]: vchkpw-pop3: autocreate dir errno 13 /home/vpopmail/domains/fergusfalls.org/john [EMAIL PROTECTED]:192.168.1.251 May 22 09:48:27 fergusfalls vpopmail[5930]: vchkpw-pop3: (PLAIN) login success [EMAIL PROTECTED]:192.168.1.251 May 22 09:48:27 fergusfalls vpopmail[5930]: vchkpw-pop3: autocreate dir errno 13 /home/vpopmail/domains/fergusfalls.org/john [EMAIL PROTECTED]:192.168.1.251 that happens everytime I try to login with thunderbird.. I watch the log with tail.. thanks, Minnesota Webworks Johannes Weberhofer, Weberhofer GmbH wrote: What does your log file say? It could also be a memory issue. John Carlson schrieb: ok, I tried the mysqladmin stuff.. and that didn't change it.. then I did a test (telnet domain.com 25) and sent an e-mail and that worked.. so I'm not sure what is going on here.. it doesn't make any sense to me.. unless there is some config that I am missing.. because squirrelmail only seems to give me the error when I have a correct e-mail address.. otherwise it tells me that I have an incorrect user .. so something is happening with the password I think.. not sure what it is... thanks, Minnesota Webworks Jake Vickers wrote: John Carlson wrote: I believe it is.. I can create new e-mail accounts and so on.. but I can't seem to connect to the server with my thunderbird or squirrelmail.. when I try to connect with squirrelmail I get this error message: * ERROR: Connection dropped by IMAP server. *when I try to connect with thunderbird I get this message: sending of password did not succeed. authorization failed. Does SMTP work? IMAP problems can be related to DNS.
Re: [qmailtoaster] large volume mail restrictions
Don't know if this is your situation without more info, but if your client is managing the list via their email client and sending via their ISP like ATT/SBC, then I'd tell them to talk to their ISP first, or use webmail on your server instead. Some ISP's have rules about how many emails you can send through their network in an hour, or the max size of an email. And don't forget to remind your client to use Bcc: if appropriate--and it sounds like it is given the large volume they are sending. John PakOgah wrote: I think it was the environment CHKUSER_RCPTLIMIT on /etc/tcprules.d/tcp.smtp by default is 50, you can increase it but dont forget to change value for CHKUSER_WRONGRCPTLIMIT the more recipient they sent the more possible wrong email address hope it help, cmiiw Good day, I was wondering, does the toaster have any sort of defaults or anti-spam measures that prevent a client from sending a large volume email (meaning recipients)? I had a client that I installed a toaster for, and htey have a mailing list they manage in their email client, and it seems like after 20 - 50 or so are sent, the connection is dropped and so on. Thanks! - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] ctyme.com criticizes qmail
I found this on wiki.ctyme.com: Qmail is a popular MTA (Mail Transfer Agent) but it has a serious flaw where is doesn't obey the rules when it comes to retrying other servers when it receives a temporary error. Domains advertise multiple MX records with priority numbers. The higher the number the lower the priority (go figure). So mail servers are supposed to try the lowest MX record first, then if that fails try the higher numbered MX servers. Qmail is written so that if the lowest MX record returns a temporary error then it refuses to try any of the other MX records and will continue to talk to the same server till it times out and reject the email. There is a patch available to fix this by the author of Qmail refuses to include it in the distributed product. If you must use Qmail we encourage you to use this patch. If you are selecting a MTA, Exim is far better. The problem this creates is that suspicious hosts are deferred on our lowest MX but accepted on the second MX. So huge amounts of spam are turned away while good email is only temporarily rejected but will be accepted if the retry on the second level that has different rules. Qmail doesn't return and therefore isn't compatible with this system. - Is it just me, or is there something wrong with this logic? When they say mail servers are supposed to try the lowest MX record first, then if that fails try the higher numbered MX servers, do they mean server down so try the next one, or do they mean the email didn't pass the mail filters on the priority mail server so try the next one? If that's the case, why would you implement one set of rules on one server and a different set of rules on the backup server (besides resource limitations, which would say a lot about this hosting company)? Is anybody familiar with this patch or why one would apply it? -John B - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] availibility clamav 0.90.2 ?
did you have to uninstall the toaster version of clamav and then just install the new rpm? I run on fedora core 6 and I have found the updated rpm for clamav but will it work with toaster then? I am just wondering.. because I would also like to update clamav. thanks for you help in advance Minnesota Webworks Johannes Weberhofer, Weberhofer GmbH wrote: I have installed clamav 0.90.2 on several SuSE servers (9.3, 10.1 and 10.2) and it is running nicely for some days. Thank you, Nick! Johannes Weberhofer slamp slamp wrote: i just installed this on my server and it seems to be functioning fine. dont see any errors.
[qmailtoaster] ezmlm list hacked?
Hello, I thought I'd share a recent experience in case someone else had the same problem: I manage an ezmlm list for a client and a few months ago I discovered the subscriber list was gone/deleted/hacked. This is a very low volume newsletter or I would have noticed earlier. No evidence of server being hacked, and I did not delete all of my subscribers accidentally. There is another moderator of the list, who doesn't have ssh access. Remote administration of the list was enabled. As too much time had passed, I wasn't able to retrieve the subscribers from backup, so I rebuilt it from the log with the script which follows. It's not rocket science, but mabye someone else could use it. Now I backup my list and report the subscriber count each night with a cron job. Anybody else had a subscriber list mysteriously wiped? John B #!/bin/sh # This script rebuilds a lost subscriber list from the subscriber log cat /root/scripts/subscriberlog.txt | while read line do echo $line | grep + /dev/null if [ $? -eq 0 ]; then email=$(echo $line | cut -d' ' -f3) echo adding $email /usr/bin/ezmlm-sub /home/vpopmail/domains/siglff.org/list $email fi echo $line | grep - /dev/null if [ $? -eq 0 ]; then email=$(echo $line | cut -d' ' -f3) echo removing $email /usr/bin/ezmlm-unsub /home/vpopmail/domains/siglff.org/list $email fi echo $line | grep +manual/dev/null if [ $? -eq 0 ]; then email=$(echo $line | cut -d' ' -f3) echo adding $email /usr/bin/ezmlm-sub /home/vpopmail/domains/siglff.org/list $email fi echo $line | grep -manual/dev/null if [ $? -eq 0 ]; then email=$(echo $line | cut -d' ' -f3) echo removing $email /usr/bin/ezmlm-unsub /home/vpopmail/domains/siglff.org/list $email fi echo $line | grep -probe/dev/null if [ $? -eq 0 ]; then email=$(echo $line | cut -d' ' -f3) echo removing $email /usr/bin/ezmlm-unsub /home/vpopmail/domains/siglff.org/list $email fi done exit - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] double bounce messages, can I just have them be deleted?
They are double bounces and they go to my postmaster account which is the catchall.. but can't I just set it to delete? I looked at the control files and it just looks that you can set doublebounceto to any user but I don't want that I want to just delete them.. and for some reason my qmailadmin web script only works when it wants to.. so I'm not sure if there is a setting in there.. that is where I set my postmaster account to the catchall. I know that on my public webserver that runs Exim lets me set default addresses to a catchall account or :blackhole: and there is another one.. so can't I do that with qmailtoster..? thanks, John Jake Vickers wrote: John Carlson wrote: I want to know if I can just have the messages that bounce be deleted? because my root account gets just nailed with failure notices. and it is because of my server receiving remote mail from non existing e-mail accounts. Do you have it configured as your catchall? And if they're double bounces, you can define where they go: http://wiki.qmailtoaster.com/index.php/Control_Files_by_Name
[qmailtoaster] using toaster as a secondary mail server and accepting wrong domains and getting double bounces
Hello everyone, I have a question, I set my server up to accept mail from (domain1.com) incase the primary server goes down. well I've got that part working but it seems to me that I am getting mail for other domains in my remote queue. why is that? I only have 3 domains in my rcpthosts file and only one in my smtproutes file and that is the only one that I relay for.. so why is my server accepting mail to relay for other domains? here is my tcp.smtp file 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1,QMAILQUEUE=/var/qmail/bin/simscan :allow,RELAYCLIENT=,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 is the error in the :allow line? I'm not sure.. any help is appreciated.. because I get a lot of double bounces also thanks John --
Re: [qmailtoaster] Simscan doesn't seem to be working
Hello I still haven't had a reply to this yet... but I'm not sure how to reinstall the spamassassin, the only thing I have running pertaining to spam is supervise spamd and I'm not sure how that is.. also I don't have the /var/qmail/supervise/spamd/ directories and that is where the run script is supposed to be.. so how do I get them back.. ? thanks in advance.. :) Thanks for the reply, I am running the newest version of qmailtoaster on a Fedora Core 6 box, and I didn't see any kind of errors when I did the install. I used the information from the qmailtoaster website to complete the installation. the only thing I didn't do in the installation is I didn't setup the djbdns and I didn't add any domain keys. and when I do a qmailctl stat it doesn't show spamd in there. so I am assuming I need to re set that up. Jake Vickers wrote: John Carlson wrote: I have noticed that the spamd service is not running, also I don't see anything in the maillog about simscan scanning the mail. also I don't see anything in the mail headers that shows that it was scanned is there something wrong.. also I don't see the spamd folder in the supervise directory doesn't it need to be there. Yes it does. I'm assuming this was a new installation. We'll need some more info, like OS, version, what steps you followed for installation, etc. Usually what happens there is you failed some dependencies for spamassassin so it was not installed. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Simscan doesn't seem to be working
And for the final.. I have fixed it.. I had to remove the spamassassin and clamav rpms and then re-install them.. and now they work fine.. thanks Hello I still haven't had a reply to this yet... but I'm not sure how to reinstall the spamassassin, the only thing I have running pertaining to spam is supervise spamd and I'm not sure how that is.. also I don't have the /var/qmail/supervise/spamd/ directories and that is where the run script is supposed to be.. so how do I get them back.. ? thanks in advance.. :) Thanks for the reply, I am running the newest version of qmailtoaster on a Fedora Core 6 box, and I didn't see any kind of errors when I did the install. I used the information from the qmailtoaster website to complete the installation. the only thing I didn't do in the installation is I didn't setup the djbdns and I didn't add any domain keys. and when I do a qmailctl stat it doesn't show spamd in there. so I am assuming I need to re set that up. Jake Vickers wrote: John Carlson wrote: I have noticed that the spamd service is not running, also I don't see anything in the maillog about simscan scanning the mail. also I don't see anything in the mail headers that shows that it was scanned is there something wrong.. also I don't see the spamd folder in the supervise directory doesn't it need to be there. Yes it does. I'm assuming this was a new installation. We'll need some more info, like OS, version, what steps you followed for installation, etc. Usually what happens there is you failed some dependencies for spamassassin so it was not installed. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Intermittent Email Send Failures
Check your /etc/tcprules.d/tcp.smtp file and check to see if the config is right and then if you have to change something make sure that you do a qmailctl cdb to reload the cdb files.. I had the same problem.. and I had to change mine.. but I'm not sure if I even have mine setup correctly.. but I don't have problem anymore. look here... : http://wiki.qmailtoaster.com/index.php/Tcp.smtp John Roxanne Sandesara wrote: I have a user that has been getting messages stating that emails she has been trying to send are being temporarily rejected by the server: 451 mail server temporarily rejected message (#4.3.0) Can anyone give me some ideas of where I should start to troubleshoot this and stop it from happening. It's starting to bother my user, and I can't really blame her. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] qq soft reject
Check your /etc/tcprules.d/tcp.smtp file and check to see if the config is right and then if you have to change something make sure that you do a qmailctl cdb to reload the cdb files.. I had the same problem.. and I had to change mine.. but I'm not sure if I even have mine setup correctly.. but I don't have problem anymore. look here... : http://wiki.qmailtoaster.com/index.php/Tcp.smtp John Jim Rash wrote: I have just completed a QT install. No matter what I have tried I always get the error: qmail-smtpd: qq soft reject (mail server temporarily rejected message (#4.3.0)): Here is my setup: [EMAIL PROTECTED] ~]# rpm -qa | grep toaster | sort autorespond-toaster-2.0.4-1.3.3 clamav-toaster-0.90.1-1.3.13 control-panel-toaster-0.5-1.3.4 courier-authlib-toaster-0.59.2-1.3.6 courier-imap-toaster-4.1.2-1.3.7 daemontools-toaster-0.76-1.3.3 ezmlm-cgi-toaster-0.53.324-1.3.3 ezmlm-toaster-0.53.324-1.3.3 isoqlog-toaster-2.1-1.3.4 libdomainkeys-toaster-0.68-1.3.3 libsrs2-toaster-1.0.18-1.3.3 qmailadmin-toaster-1.2.11-1.3.4 qmailmrtg-toaster-4.2-1.3.3 qmail-pop3d-toaster-1.03-1.3.15 qmail-toaster-1.03-1.3.15 ripmime-toaster-1.4.0.6-1.3.3 simscan-toaster-1.3.1-1.3.6 spamassassin-toaster-3.1.8-1.3.8 squirrelmail-toaster-1.4.9a-1.3.6 ucspi-tcp-toaster-0.88-1.3.5 vpopmail-toaster-5.4.17-1.3.4 [EMAIL PROTECTED] ~]# qmailctl stat authlib: up (pid 1706) 5518 seconds clamd: up (pid 1708) 5518 seconds imap4: up (pid 1745) 5518 seconds imap4-ssl: up (pid 1712) 5518 seconds pop3: up (pid 1747) 5518 seconds pop3-ssl: up (pid 1749) 5518 seconds send: up (pid 1699) 5518 seconds smtp: up (pid 1734) 5518 seconds spamd: up (pid 1738) 5518 seconds submission: up (pid 1729) 5518 seconds authlib/log: up (pid 1728) 5518 seconds clamd/log: up (pid 1710) 5518 seconds imap4/log: up (pid 1732) 5518 seconds imap4-ssl/log: up (pid 1714) 5518 seconds pop3/log: up (pid 1752) 5518 seconds pop3-ssl/log: up (pid 1751) 5518 seconds send/log: up (pid 1701) 5518 seconds smtp/log: up (pid 1736) 5518 seconds spamd/log: up (pid 1746) 5518 seconds submission/log: up (pid 1730) 5518 seconds I can send email locally or externally but cannot receive email from external sites. Looking forward to help. Thanks, Jim
[qmailtoaster] Spam assassin not showing in headers.
here are my headers from an e-mail I sent my self.. that had just garbled text in it.. *Return-Path:* [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com *Delivered-To:* [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40fergusfalls.org *Received:* (qmail 8466 invoked by uid 510); 20 Apr 2007 17:43:55 - *Received:* by simscan 1.3.1 ppid: 8460, pid: 8461, t: 1.8441s scanners: attach: 1.3.1 clamav: 0.90.1-exp/m:42 *Received:* from unknown (HELO server.mnww.com) (209.59.201.251) by fergusfalls.org with (DHE-RSA-AES256-SHA encrypted) SMTP; 20 Apr 2007 17:43:53 - *Received:* from [216.161.238.81] (helo=[192.168.1.251]) by server.mnww.com with esmtpa (Exim 4.63) (envelope-from [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com) id 1Hex9D-0002Pj-6G for [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40fergusfalls.org; Fri, 20 Apr 2007 12:43:52 -0500 *Message-ID:* [EMAIL PROTECTED] *Date:* Fri, 20 Apr 2007 12:43:49 -0500 *From:* John Carlson [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com *User-Agent:* Thunderbird 1.5.0.10 (Macintosh/20070221) *MIME-Version:* 1.0 *To:* [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40fergusfalls.org *Subject:* Hello john thiss iss spam *Content-Type:* multipart/alternative; boundary=080206030404020106000908 *X-AntiAbuse:* This header was added to track abuse, please include it with any abuse report *X-AntiAbuse:* Primary Hostname - server.mnww.com *X-AntiAbuse:* Original Domain - fergusfalls.org *X-AntiAbuse:* Originator/Caller UID/GID - [47 12] / [47 12] *X-AntiAbuse:* Sender Address Domain - mnww.com *X-Source:* *X-Source-Args:* *X-Source-Dir:* I see that it shows simscan running through it.. but I don't see it saying anything about spamassassin.. it shows clamav and the attach scanners.. but that is it.. and here is my simcontrol file config.. :clam=yes,spam=yes,spam_hits=20,attach=.src:.bat:.pif:.exe:.cmd:.com and spam_hits of 20 is allot I think.. considering in the spamassassin config file I have required score of 3 and I had required hits at 5 but I removed the required hits. also I used to see in my log for qmail before I installed qmailtoaster that it would tell me when spamd checked the mail.. but now it is just saying simscan.. any help is appreciated.
Re: [qmailtoaster] Spam assassin not showing in headers.
this is the main machine config files.. I don't know where to set it up for the specific domain... I assume that this is controlling all mail coming through the box.. John Jake Vickers wrote: John Carlson wrote: here are my headers from an e-mail I sent my self.. that had just garbled text in it.. *Return-Path:* [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com *Delivered-To:* [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40fergusfalls.org *Received:* (qmail 8466 invoked by uid 510); 20 Apr 2007 17:43:55 - *Received:* by simscan 1.3.1 ppid: 8460, pid: 8461, t: 1.8441s scanners: attach: 1.3.1 clamav: 0.90.1-exp/m:42 *Received:* from unknown (HELO server.mnww.com) (209.59.201.251) by fergusfalls.org with (DHE-RSA-AES256-SHA encrypted) SMTP; 20 Apr 2007 17:43:53 - *Received:* from [216.161.238.81] (helo=[192.168.1.251]) by server.mnww.com with esmtpa (Exim 4.63) (envelope-from [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com) id 1Hex9D-0002Pj-6G for [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40fergusfalls.org; Fri, 20 Apr 2007 12:43:52 -0500 *Message-ID:* [EMAIL PROTECTED] *Date:* Fri, 20 Apr 2007 12:43:49 -0500 *From:* John Carlson [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com *User-Agent:* Thunderbird 1.5.0.10 (Macintosh/20070221) *MIME-Version:* 1.0 *To:* [EMAIL PROTECTED] http://192.168.1.152/webmail/src/compose.php?send_to=john%40fergusfalls.org *Subject:* Hello john thiss iss spam *Content-Type:* multipart/alternative; boundary=080206030404020106000908 *X-AntiAbuse:* This header was added to track abuse, please include it with any abuse report *X-AntiAbuse:* Primary Hostname - server.mnww.com *X-AntiAbuse:* Original Domain - fergusfalls.org *X-AntiAbuse:* Originator/Caller UID/GID - [47 12] / [47 12] *X-AntiAbuse:* Sender Address Domain - mnww.com *X-Source:* *X-Source-Args:* *X-Source-Dir:* I see that it shows simscan running through it.. but I don't see it saying anything about spamassassin.. it shows clamav and the attach scanners.. but that is it.. and here is my simcontrol file config.. :clam=yes,spam=yes,spam_hits=20,attach=.src:.bat:.pif:.exe:.cmd:.com and spam_hits of 20 is allot I think.. considering in the spamassassin config file I have required score of 3 and I had required hits at 5 but I removed the required hits. also I used to see in my log for qmail before I installed qmailtoaster that it would tell me when spamd checked the mail.. but now it is just saying simscan.. any help is appreciated. Was this sent from a domain on the same machine as the recipient address? The score of 20 in the simcontrol file is the number at which the email will be deleted without being delivered to the user.
[qmailtoaster] Simscan doesn't seem to be working
I have noticed that the spamd service is not running, also I don't see anything in the maillog about simscan scanning the mail. also I don't see anything in the mail headers that shows that it was scanned is there something wrong.. also I don't see the spamd folder in the supervise directory doesn't it need to be there. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Simscan doesn't seem to be working
Thanks for the reply, I am running the newest version of qmailtoaster on a Fedora Core 6 box, and I didn't see any kind of errors when I did the install. I used the information from the qmailtoaster website to complete the installation. the only thing I didn't do in the installation is I didn't setup the djbdns and I didn't add any domain keys. and when I do a qmailctl stat it doesn't show spamd in there. so I am assuming I need to re set that up. Jake Vickers wrote: John Carlson wrote: I have noticed that the spamd service is not running, also I don't see anything in the maillog about simscan scanning the mail. also I don't see anything in the mail headers that shows that it was scanned is there something wrong.. also I don't see the spamd folder in the supervise directory doesn't it need to be there. Yes it does. I'm assuming this was a new installation. We'll need some more info, like OS, version, what steps you followed for installation, etc. Usually what happens there is you failed some dependencies for spamassassin so it was not installed. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Turn off Domainkeys?
Yes, but what about the Domainkeys variables in tcp.smtp, DKSIGN and DKVERIFY? Remove those as well or leave them alone? -John Bilgehan POYRAZ wrote: Hi, This fallow this way to disable domain-keys cd /var/qmail/bin ln -sf qmail-queue.orig qmail-queue And then restart qmail: qmailctl restart Bilgehan POYRAZ APTEC TURKEY CA Technical Support -Original Message- From: Carlos Melo [mailto:[EMAIL PROTECTED] Sent: Friday, April 13, 2007 5:15 PM To: Lista TOASTER Subject: [qmailtoaster] Turn off Domainkeys? Hi list? How can i turn off the domainkeys in my QTbox? Thanks, Carlos Melo - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] how to reinstall Spamassassin by hand
I am trying to avoid reinstalling all Toaster packages and would just like to reinstall Spamassassin. I want to do this because my Spamassassin memory footprint exploded after I upgraded SA using qtp-newmodel, leaving me next to no free RAM. Can I simply rpm -e --nodeps, then rpmbuild --rebuild, then rpm -Uvh? Thanks, John - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
