[qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Randraa - Yahoo 
About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

[qmailtoaster] ClamAV is OUTDATED!

2008-02-11 Thread Randraa - Yahoo 
About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

The I can perfectly be correcting? Using the qmailtoaster.

Excuses for the previous e-mail.

Re: [qmailtoaster] ClamAV is OUTDATED!

2008-02-11 Thread Buzzz 
> About the error:
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.90.1 Recommended version: 0.92
> DON'T PANIC! Read http://www.clamav.net/support/faq
> main.cvd version from DNS: 45
>
> The I can perfectly be correcting? Using the qmailtoaster.
>
> Excuses for the previous e-mail.
But ... what is the question ?


-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Jim Shupert, Jr. 
Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4) clamav-toaster-0.92-1.3.16.src.rpm 

thanks!
jS

  - Original Message - 
  From: Dan McAllister 
  To: qmailtoaster-list@qmailtoaster.com 
  Sent: Monday, February 11, 2008 1:40 PM
  Subject: Re: [qmailtoaster] Clamav is OUTDATED.


  Update the CLAMAV RPM from the devel website... 

  Step by step:
   1) Download the clamav src.rpm from http://devel.qmailtoaster.com/ (latest I 
see is from December, 2007)
   2) STOP Qmail (qmailctl stop)
   3) STOP FreshClam (on Redhat/Fedora/CentOS you could use: service freshclam 
stop)
   3) WAIT for all the processes to truly stop (you can use variants of ps and 
kill if you're impatient)
   4) run the install for clamav
   rpmbuild --rebuild --with ($YOURDISTRO) 
clamav-toaster-0.92-1.3.16.src.rpm 
   5) RESTART freshclam (service freshclam start)
   6) RESTART qmail (qmailctl start)

  The error message will go away TOMORROW

  I hope this helps someone!

  Dan



Daniel McAllister, President

IT4SOHO, LLC
224 - 13th Avenue N
St. Petersburg, FL 33701

877-IT4SOHO: Toll Free
727-647-7646 In Pinellas
813-464-2093 In Hillsborough
727-507-9435 Fax Only

"When did you do your last backup?"

Ask me about unattended offsite backup solutions...
to protect your business, not just your data!

  Randraa - Yahoo wrote: 
About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Dan McAllister 

Update the CLAMAV RPM from the devel website...

Step by step:
1) Download the clamav src.rpm from http://devel.qmailtoaster.com/ 
(latest I see is from December, 2007)

2) STOP Qmail (qmailctl stop)
3) STOP FreshClam (on Redhat/Fedora/CentOS you could use: service 
freshclam stop)
3) WAIT for all the processes to truly stop (you can use variants of ps 
and kill if you're impatient)

4) run the install for clamav
rpmbuild --rebuild --with ($YOURDISTRO) 
clamav-toaster-0.92-1.3.16.src.rpm

5) RESTART freshclam (service freshclam start)
6) RESTART qmail (qmailctl start)

The error message will go away TOMORROW

I hope this helps someone!

Dan


Daniel McAllister, President

IT4SOHO, LLC
224 - 13th Avenue N
St. Petersburg, FL 33701

877-IT4SOHO: Toll Free
727-647-7646 In Pinellas
813-464-2093 In Hillsborough
727-507-9435 Fax Only

"When did you do your last backup?"

Ask me about unattended offsite backup solutions...
to protect your business, not just your data!



Randraa - Yahoo wrote:

About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

RE: [qmailtoaster] ClamAV is OUTDATED!

2008-02-11 Thread James E. Pratt 
No. You will need to "dissect" the changes made in the qmail-toaster
clamav package, and then duplicate the changes for clam 0.92 and
repackage it... OR.. you can just try to install it and hork around with
it and get it working from src.. (possible, but not recommended!)


-Original Message-
From: Randraa [mailto:[EMAIL PROTECTED] 
Sent: Monday, February 11, 2008 10:17 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] ClamAV is OUTDATED!

yst, but me updating for the normal package (package standard of clamav,

encoutered in site), qmail-toaster will work perfectly with clamav?



- Original Message - 
From: "James E. Pratt" <[EMAIL PROTECTED]>
To: 
Sent: Monday, February 11, 2008 10:33 AM
Subject: RE: [qmailtoaster] ClamAV is OUTDATED!


-Original Message-
From: Buzzz [mailto:[EMAIL PROTECTED]
Sent: Monday, February 11, 2008 6:45 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] ClamAV is OUTDATED!

> About the error:
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.90.1 Recommended version: 0.92
> DON'T PANIC! Read http://www.clamav.net/support/faq
> main.cvd version from DNS: 45
>
> The I can perfectly be correcting? Using the qmailtoaster.
>
> Excuses for the previous e-mail.
> But ... what is the question ?

I don't think it was a question just a statement we already knew.. (Why
is it so outdated anyhow, and SA at 3.1.8?

My answer is to just do what I did... re-package/upgrade them! ;)

-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV is OUTDATED!

2008-02-11 Thread Randraa 
yst, but me updating for the normal package (package standard of clamav, 
encoutered in site), qmail-toaster will work perfectly with clamav?




- Original Message - 
From: "James E. Pratt" <[EMAIL PROTECTED]>

To: 
Sent: Monday, February 11, 2008 10:33 AM
Subject: RE: [qmailtoaster] ClamAV is OUTDATED!


-Original Message-
From: Buzzz [mailto:[EMAIL PROTECTED]
Sent: Monday, February 11, 2008 6:45 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] ClamAV is OUTDATED!


About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

The I can perfectly be correcting? Using the qmailtoaster.

Excuses for the previous e-mail.
But ... what is the question ?


I don't think it was a question just a statement we already knew.. (Why
is it so outdated anyhow, and SA at 3.1.8?

My answer is to just do what I did... re-package/upgrade them! ;)

-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Eric "Shubes" 
No, that should be:

rpmbuild --rebuild --with cnt40 clamav-toaster-0.92-1.3.16.src.rpm

The qtp-whatami command shows the BUILD_DIST= value, which is what goes
after the "--with" parameter of the rpmbuild command.

It's really much simpler to use qtp-newmodel though, a new (and much
improved) version of which will likely be released later this week.


Jim Shupert, Jr. wrote:
> Hey thanks for this...
> and just to be realll clear for me
> my distro is centOS4.4   so would step 4 for me be
>  
> is the below the exact sysntax?
>  
> rpmbuild --rebuild --with ($centOS4.4) clamav-toaster-0.92-1.3.16.src.rpm
>  
> thanks!
> jS
> 

-- 
-Eric 'shubes'

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: [qmailtoaster] ClamAV is OUTDATED!

2008-02-11 Thread James E. Pratt 
-Original Message-
From: Buzzz [mailto:[EMAIL PROTECTED] 
Sent: Monday, February 11, 2008 6:45 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] ClamAV is OUTDATED!

> About the error:
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.90.1 Recommended version: 0.92
> DON'T PANIC! Read http://www.clamav.net/support/faq
> main.cvd version from DNS: 45
>
> The I can perfectly be correcting? Using the qmailtoaster.
>
> Excuses for the previous e-mail.
> But ... what is the question ?

I don't think it was a question just a statement we already knew.. (Why
is it so outdated anyhow, and SA at 3.1.8? 

My answer is to just do what I did... re-package/upgrade them! ;)

-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread lordfuknowsyou 
Hello list. I wasn't going to mail about this but since we are on the 
subject.


I recently tried the qtp-newmodel  and have run into errors.

Required module is out of date. HTML::Parser.

I have found that this is a know issue with some people able to edit 
spam.sh and work around the error, before I procede I would like the 
list's input if at all possible. I am hoping someone on here has 
encountered this before.


qtp-whatami v0.2.4
DISTRO=CentOS
OSVER=4.6
ARCH=i686
BUILD_DIST=cnt40
BUILD_DIR=/usr/src/redhat
This machine's OS is supported, but this version/arch has not been tested.

# perl -MHTML::Parser -e 'print "$HTML::Parser::VERSION\n"'
3.56

Many Thanks In Advance and I hope this helps someone else as well.

Jeremy


Harry Zink wrote:

Ditto here.


On Feb 11, 2008, at 3:38 PM, Jim Shupert, Jr. wrote:


Thanks Eric!
I will keep my eyes peeled for this qtp-newmodel


- Original Message - From: "Eric "Shubes"" <[EMAIL PROTECTED]>
To: 
Sent: Monday, February 11, 2008 4:41 PM
Subject: Re: [qmailtoaster] Clamav is OUTDATED.



No, that should be:

rpmbuild --rebuild --with cnt40 clamav-toaster-0.92-1.3.16.src.rpm

The qtp-whatami command shows the BUILD_DIST= value, which is what goes
after the "--with" parameter of the rpmbuild command.

It's really much simpler to use qtp-newmodel though, a new (and much
improved) version of which will likely be released later this week.


Jim Shupert, Jr. wrote:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4) 
clamav-toaster-0.92-1.3.16.src.rpm


thanks!
jS



--
-Eric 'shubes'

-
   QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: 
[EMAIL PROTECTED]





-
   QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]





-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Jim Shupert, Jr. 

Thanks Eric!
I will keep my eyes peeled for this qtp-newmodel


- Original Message - 
From: "Eric "Shubes"" <[EMAIL PROTECTED]>

To: 
Sent: Monday, February 11, 2008 4:41 PM
Subject: Re: [qmailtoaster] Clamav is OUTDATED.



No, that should be:

rpmbuild --rebuild --with cnt40 clamav-toaster-0.92-1.3.16.src.rpm

The qtp-whatami command shows the BUILD_DIST= value, which is what goes
after the "--with" parameter of the rpmbuild command.

It's really much simpler to use qtp-newmodel though, a new (and much
improved) version of which will likely be released later this week.


Jim Shupert, Jr. wrote:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4) clamav-toaster-0.92-1.3.16.src.rpm

thanks!
jS



--
-Eric 'shubes'

-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]





-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Harry Zink 

Ditto here.


On Feb 11, 2008, at 3:38 PM, Jim Shupert, Jr. wrote:


Thanks Eric!
I will keep my eyes peeled for this qtp-newmodel


- Original Message - From: "Eric "Shubes"" <[EMAIL PROTECTED]>
To: 
Sent: Monday, February 11, 2008 4:41 PM
Subject: Re: [qmailtoaster] Clamav is OUTDATED.



No, that should be:

rpmbuild --rebuild --with cnt40 clamav-toaster-0.92-1.3.16.src.rpm

The qtp-whatami command shows the BUILD_DIST= value, which is what  
goes

after the "--with" parameter of the rpmbuild command.

It's really much simpler to use qtp-newmodel though, a new (and much
improved) version of which will likely be released later this week.


Jim Shupert, Jr. wrote:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4) clamav- 
toaster-0.92-1.3.16.src.rpm


thanks!
jS



--
-Eric 'shubes'

-
   QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: qmailtoaster-list- 
[EMAIL PROTECTED]

For additional commands, e-mail: [EMAIL PROTECTED]




-
   QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-11 Thread Harry Zink 
I believe a new version is about to be released this week, from what I  
just read on the list within the past hours.


Harry


On Feb 11, 2008, at 5:21 PM, lordfuknowsyou wrote:

Hello list. I wasn't going to mail about this but since we are on  
the subject.


I recently tried the qtp-newmodel  and have run into errors.

Required module is out of date. HTML::Parser.

I have found that this is a know issue with some people able to edit  
spam.sh and work around the error, before I procede I would like the  
list's input if at all possible. I am hoping someone on here has  
encountered this before.


qtp-whatami v0.2.4
DISTRO=CentOS
OSVER=4.6
ARCH=i686
BUILD_DIST=cnt40
BUILD_DIR=/usr/src/redhat
This machine's OS is supported, but this version/arch has not been  
tested.


# perl -MHTML::Parser -e 'print "$HTML::Parser::VERSION\n"'
3.56

Many Thanks In Advance and I hope this helps someone else as well.

Jeremy


Harry Zink wrote:

Ditto here.


On Feb 11, 2008, at 3:38 PM, Jim Shupert, Jr. wrote:


Thanks Eric!
I will keep my eyes peeled for this qtp-newmodel


- Original Message - From: "Eric "Shubes"" <[EMAIL PROTECTED]>
To: 
Sent: Monday, February 11, 2008 4:41 PM
Subject: Re: [qmailtoaster] Clamav is OUTDATED.



No, that should be:

rpmbuild --rebuild --with cnt40 clamav-toaster-0.92-1.3.16.src.rpm

The qtp-whatami command shows the BUILD_DIST= value, which is  
what goes

after the "--with" parameter of the rpmbuild command.

It's really much simpler to use qtp-newmodel though, a new (and  
much

improved) version of which will likely be released later this week.


Jim Shupert, Jr. wrote:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4) clamav- 
toaster-0.92-1.3.16.src.rpm


thanks!
jS



--
-Eric 'shubes'

-
  QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
  QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
   QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: qmailtoaster-list- 
[EMAIL PROTECTED]

For additional commands, e-mail: [EMAIL PROTECTED]





-
   QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-12 Thread Andreas 
Hi Jim,

I think your syntax is not correct like that and Dan has forgotten to
really install the rpm.
Should be:
rpmbuild --rebuild --with cnt40 ... to build the binarys and then 

rpm -Uvh   your clamav...rpm  to install it.


Andreas

Am Montag, den 11.02.2008, 15:56 -0500 schrieb Jim Shupert, Jr.:
> Hey thanks for this...
> and just to be realll clear for me
> my distro is centOS4.4   so would step 4 for me be
>  
> is the below the exact sysntax?
>  
> rpmbuild --rebuild --with ($centOS4.4)
> clamav-toaster-0.92-1.3.16.src.rpm 
>  
> thanks!
> jS
> 
> - Original Message - 
> From: Dan McAllister 
> To: qmailtoaster-list@qmailtoaster.com 
> Sent: Monday, February 11, 2008 1:40 PM
> Subject: Re: [qmailtoaster] Clamav is OUTDATED.
> 
> 
> Update the CLAMAV RPM from the devel website... 
> 
> Step by step:
>  1) Download the clamav src.rpm from
> http://devel.qmailtoaster.com/ (latest I see is from December,
> 2007)
>  2) STOP Qmail (qmailctl stop)
>  3) STOP FreshClam (on Redhat/Fedora/CentOS you could use:
> service freshclam stop)
>  3) WAIT for all the processes to truly stop (you can use
> variants of ps and kill if you're impatient)
>  4) run the install for clamav
>  rpmbuild --rebuild --with ($YOURDISTRO)
> clamav-toaster-0.92-1.3.16.src.rpm 
>  5) RESTART freshclam (service freshclam start)
>  6) RESTART qmail (qmailctl start)
> 
> The error message will go away TOMORROW
> 
> I hope this helps someone!
> 
> Dan
> 
> 
> Daniel McAllister, President
> 
> IT4SOHO, LLC
> 224 - 13th Avenue N
> St. Petersburg, FL 33701
> 
> 877-IT4SOHO: Toll Free
> 727-647-7646 In Pinellas
> 813-464-2093 In Hillsborough
> 727-507-9435 Fax Only
> 
> "When did you do your last backup?"
> 
> Ask me about unattended offsite backup solutions...
> to protect your business, not just your data!
> 
> 
> Randraa - Yahoo wrote: 
> > About the error:
> > WARNING: Your ClamAV installation is OUTDATED!
> > WARNING: Local version: 0.90.1 Recommended version: 0.92
> > DON'T PANIC! Read http://www.clamav.net/support/faq
> > main.cvd version from DNS: 45


-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-12 Thread Randraa 
Thanks so much, fixed here.

Why u said "The erros message will go away TOMORROW?" 
When freshclam will be updated?

Thanks so much Dan.


Best Regards!
  - Original Message - 
  From: Dan McAllister 
  To: qmailtoaster-list@qmailtoaster.com 
  Sent: Monday, February 11, 2008 3:40 PM
  Subject: Re: [qmailtoaster] Clamav is OUTDATED.


  Update the CLAMAV RPM from the devel website... 

  Step by step:
   1) Download the clamav src.rpm from http://devel.qmailtoaster.com/ (latest I 
see is from December, 2007)
   2) STOP Qmail (qmailctl stop)
   3) STOP FreshClam (on Redhat/Fedora/CentOS you could use: service freshclam 
stop)
   3) WAIT for all the processes to truly stop (you can use variants of ps and 
kill if you're impatient)
   4) run the install for clamav
   rpmbuild --rebuild --with ($YOURDISTRO) 
clamav-toaster-0.92-1.3.16.src.rpm 
   5) RESTART freshclam (service freshclam start)
   6) RESTART qmail (qmailctl start)

  The error message will go away TOMORROW

  I hope this helps someone!

  Dan



Daniel McAllister, President

IT4SOHO, LLC
224 - 13th Avenue N
St. Petersburg, FL 33701

877-IT4SOHO: Toll Free
727-647-7646 In Pinellas
813-464-2093 In Hillsborough
727-507-9435 Fax Only

"When did you do your last backup?"

Ask me about unattended offsite backup solutions...
to protect your business, not just your data!

  Randraa - Yahoo wrote: 
About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-12 Thread Dan McAllister 
OOPS! Andreas is correct while my instructions included the building 
of the rpm, it did NOT include the installation of said re-built RPM! In 
truth, I pulled the command lines from my own "custom" updater script (I 
haven't shared it because I am an atypical sysadmin -- I believe much 
more strongly than most: "if it ain't broke, don't fix it" -- so my 
update script checks the devel site for new releases & gives me an 
interactive prompt on whether or not to install the update. In truth, I 
don't think I've updated anything but CLAMAV in the past 6 months or 
so...maybe even 9!)


Thanks for finding the omission Andreas!!!

Dan


Andreas wrote:

Hi Jim,

I think your syntax is not correct like that and Dan has forgotten to
really install the rpm.
Should be:
rpmbuild --rebuild --with cnt40 ... to build the binarys and then 


rpm -Uvh   your clamav...rpm  to install it.


Andreas

  


-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED.

2008-02-12 Thread Dan McAllister 

Actually, I think the Centos 4 distro info would make the command line

rpmbuild --rebuild --with cnt40 clamav-toaster-0.92-1.3.16.src.rpm

(I got the "magic code" from the install script provided on the 
qmailtoaster.com)


Dan

Daniel McAllister, President

IT4SOHO, LLC
224 - 13th Avenue N
St. Petersburg, FL 33701

877-IT4SOHO: Toll Free
727-647-7646 In Pinellas
813-464-2093 In Hillsborough
727-507-9435 Fax Only

"When did you do your last backup?"

Ask me about unattended offsite backup solutions...
to protect your business, not just your data!



Jim Shupert, Jr. wrote:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be
 
is the below the exact sysntax?
 
rpmbuild --rebuild --with ($centOS4.4) clamav-toaster-0.92-1.3.16.src.rpm
 
thanks!

jS

- Original Message -
*From:* Dan McAllister <mailto:[EMAIL PROTECTED]>
*To:* qmailtoaster-list@qmailtoaster.com
<mailto:qmailtoaster-list@qmailtoaster.com>
*Sent:* Monday, February 11, 2008 1:40 PM
    *Subject:* Re: [qmailtoaster] Clamav is OUTDATED.

Update the CLAMAV RPM from the devel website...

Step by step:
 1) Download the clamav src.rpm from
http://devel.qmailtoaster.com/ (latest I see is from December, 2007)
 2) STOP Qmail (qmailctl stop)
 3) STOP FreshClam (on Redhat/Fedora/CentOS you could use: service
freshclam stop)
 3) WAIT for all the processes to truly stop (you can use variants
of ps and kill if you're impatient)
 4) run the install for clamav
 rpmbuild --rebuild --with ($YOURDISTRO)
clamav-toaster-0.92-1.3.16.src.rpm
 5) RESTART freshclam (service freshclam start)
 6) RESTART qmail (qmailctl start)

The error message will go away TOMORROW

I hope this helps someone!

Dan


Daniel McAllister, President

IT4SOHO, LLC
224 - 13th Avenue N
St. Petersburg, FL 33701

877-IT4SOHO: Toll Free
727-647-7646 In Pinellas
813-464-2093 In Hillsborough
727-507-9435 Fax Only

"When did you do your last backup?"

Ask me about unattended offsite backup solutions...
to protect your business, not just your data!



Randraa - Yahoo wrote:

About the error:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.92
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd version from DNS: 45

[qmailtoaster] Re: HTML::Parser [was: Re: [qmailtoaster] Clamav is OUTDATED.]

2008-02-11 Thread Eric "Shubes" 
lordfuknowsyou wrote:
> Hello list. I wasn't going to mail about this but since we are on the
> subject.
> 
> I recently tried the qtp-newmodel  and have run into errors.
> 
> Required module is out of date. HTML::Parser.

It's not clear to me where this message came from.

> I have found that this is a know issue with some people able to edit
> spam.sh and work around the error, before I procede I would like the
> list's input if at all possible. I am hoping someone on here has
> encountered this before.
> 
> qtp-whatami v0.2.4
> DISTRO=CentOS
> OSVER=4.6
> ARCH=i686
> BUILD_DIST=cnt40
> BUILD_DIR=/usr/src/redhat
> This machine's OS is supported, but this version/arch has not been tested.
> 
> # perl -MHTML::Parser -e 'print "$HTML::Parser::VERSION\n"'
> 3.56

I have a toaster installed with what I believe are the latest toaster
packages (specifically spamassassin-toaster-3.2.3-1.3.12, which uses perl
HTML::Parser), and that system also has version 3.56 of HTML::Parser installed.

Please upgrade your qmailtoaster-plus package and try running qtp-newmodel
again. Be sure to select the option to rebuild the sandbox if an old one
still exists.

Let us know how you make out.

-- 
-Eric 'shubes'

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Re: HTML::Parser [was: Re: [qmailtoaster] Clamav is OUTDATED.]

2008-02-12 Thread lordfuknowsyou 

All Done :)

Indeed it was the conflict between yum and cpan. Successfully updated now.

As for the unionfs sandbox, that was my brain leaking, I had the wrong 
dev headers installed, once I sorted that out it worked like a champ.


Many Thanks. Hope this helps someone else.

Jeremy


Eric "Shubes" wrote:

lordfuknowsyou wrote:
  

Hello and thanks for your response. I am sorry I wasn't more verbose in
my explanation.

I gleaned that error from tail -f
/mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log during a bed
the other night. If it wasn't that log specifically I know it was a log
associated with the qtp-newmodel process because I was instructed to do
just that by an interactive process.

I have updated, about 2 minutes after the email was sent out  :].

After an upgrade(of toaster through yum), reboot, a new non linked, non
unioned(errors on that) sandbox.



It'd be nice to know what error(s) you received using the unioned sandbox so
it can be fixed. Please include the results of
# uname -a
# rpm -qa | grep kernel
with your description of the problem.

  

I now receive new build errors, again gleaned from the above tail command.

tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log
+ rm -rf Mail-SpamAssassin-3.2.4
+ exit 0
Installing spamassassin-toaster-3.2.4-1.3.13 in the sandbox ...
error: Failed dependencies:
   perl(Archive::Tar) >= 1.23 is needed by
spamassassin-toaster-3.2.4-1.3.13.i686
   perl(HTML::Parser) >= 3.43 is needed by
spamassassin-toaster-3.2.4-1.3.13.i686
   perl(IO::Zlib) >= 1.04 is needed by
spamassassin-toaster-3.2.4-1.3.13.i686
   Suggested resolutions:
  
/home/buildcentos/CENTOS/en/4.0/i386/CentOS/RPMS/perl-Archive-Tar-1.30-1.el4.noarch.rpm   
/home/buildcentos/CENTOS/en/4.0/i386/CentOS/RPMS/perl-IO-Zlib-1.04-4.2.el4.noarch.rpm



I know now where these are coming from, because I tried an upgrade last
night too and received these identical errors.

  

I have not tried the suggested resolutions, because that still leaves me
with an out of date parser.



I did a yum install of perl-Archive-Tar and perl-IO-Zlib and that fixed
those deps, but you're absolulely correct about the Parser package.

I have:
# perl -MHTML::Parser -e 'print "$HTML::Parser::VERSION\n"'
3.56
# rpm -q perl-HTML-Parser
perl-HTML-Parser-3.35-6

So perl "thinks" the package is up to date and so does yum, yet they're
reporting different versions. There appears to be a contradiction here.

  

# rpm -qa perl
perl-5.8.5-36.el4_5.2



I have:
# rpm -q perl
perl-5.8.8-5.el4s1_2

  

I appreciate any suggestions. Many Thanks In Advance.



So, where to go from here? Looking at rpmforge, I see that they have an rpm
for (the latest) perl-HTML-Parser-3.56. If one was in a real hurry, you might:
# rpm -Uvh \
http://dag.wieers.com/rpm/packages/perl-HTML-Parser/perl-HTML-Parser-3.56-1.el4.rf.i386.rpm

However, I'd like to have the rpmforge packages available to yum in the
future, so I:

# cd
# wget \
http://dag.wieers.com/rpm/packages/rpmforge-release/rpmforge-release-0.3.6-1.el4.rf.i386.rpm
# rpm -ivh rpmforge-release-0.3.6-1.el4.rf.i386.rpm
# yum -y perl-HTML-Parser

That installed perl-HTML-Parser-3.56 from rpmforge, putting rpm back in sync
with CPAN:
# rpm -q perl-HTML-Parser
perl-HTML-Parser-3.56-1.el4.rf

So I'm proceeding to rerun qtp-newmodel, building a new sandbox (again -
that unionfs feature is sweet when it works). I'm guessing that it'll all
work this time. I'll keep you posted.

  



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Re: HTML::Parser [was: Re: [qmailtoaster] Clamav is OUTDATED.]

2008-02-12 Thread lordfuknowsyou 
Hello and thanks for your response. I am sorry I wasn't more verbose in 
my explanation.


I gleaned that error from tail -f 
/mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log during a bed 
the other night. If it wasn't that log specifically I know it was a log 
associated with the qtp-newmodel process because I was instructed to do 
just that by an interactive process.


I have updated, about 2 minutes after the email was sent out  :].

After an upgrade(of toaster through yum), reboot, a new non linked, non 
unioned(errors on that) sandbox.

I now receive new build errors, again gleaned from the above tail command.

tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log
+ rm -rf Mail-SpamAssassin-3.2.4
+ exit 0
Installing spamassassin-toaster-3.2.4-1.3.13 in the sandbox ...
error: Failed dependencies:
   perl(Archive::Tar) >= 1.23 is needed by 
spamassassin-toaster-3.2.4-1.3.13.i686
   perl(HTML::Parser) >= 3.43 is needed by 
spamassassin-toaster-3.2.4-1.3.13.i686
   perl(IO::Zlib) >= 1.04 is needed by 
spamassassin-toaster-3.2.4-1.3.13.i686

   Suggested resolutions:
   
/home/buildcentos/CENTOS/en/4.0/i386/CentOS/RPMS/perl-Archive-Tar-1.30-1.el4.noarch.rpm
/home/buildcentos/CENTOS/en/4.0/i386/CentOS/RPMS/perl-IO-Zlib-1.04-4.2.el4.noarch.rpm



I have not tried the suggested resolutions, because that still leaves me 
with an out of date parser.


# rpm -qa perl
perl-5.8.5-36.el4_5.2

I appreciate any suggestions. Many Thanks In Advance.

Jeremy

Eric "Shubes" wrote:

lordfuknowsyou wrote:
  

Hello list. I wasn't going to mail about this but since we are on the
subject.

I recently tried the qtp-newmodel  and have run into errors.

Required module is out of date. HTML::Parser.



It's not clear to me where this message came from.

  

I have found that this is a know issue with some people able to edit
spam.sh and work around the error, before I procede I would like the
list's input if at all possible. I am hoping someone on here has
encountered this before.

qtp-whatami v0.2.4
DISTRO=CentOS
OSVER=4.6
ARCH=i686
BUILD_DIST=cnt40
BUILD_DIR=/usr/src/redhat
This machine's OS is supported, but this version/arch has not been tested.

# perl -MHTML::Parser -e 'print "$HTML::Parser::VERSION\n"'
3.56



I have a toaster installed with what I believe are the latest toaster
packages (specifically spamassassin-toaster-3.2.3-1.3.12, which uses perl
HTML::Parser), and that system also has version 3.56 of HTML::Parser installed.

Please upgrade your qmailtoaster-plus package and try running qtp-newmodel
again. Be sure to select the option to rebuild the sandbox if an old one
still exists.

Let us know how you make out.

  



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Re: HTML::Parser [was: Re: [qmailtoaster] Clamav is OUTDATED.]

2008-02-12 Thread Eric "Shubes" 
Worked for me too. It's nice when things work as they should, isn't it?
:)

lordfuknowsyou wrote:
> All Done :)
> 
> Indeed it was the conflict between yum and cpan. Successfully updated now.
> 
> As for the unionfs sandbox, that was my brain leaking, I had the wrong
> dev headers installed, once I sorted that out it worked like a champ.

Yeah, the error messages in this area aren't real specific about what the
problem is. You need to make sure that you have the kernel-devel package
installed for the kernel that's currently running. It'd be nice to improve
error detection in a future release.

> Many Thanks. Hope this helps someone else.

Likewise. And kudos to Justice London for doing the lions share of the work
developing the unionfs capabilities for qtp-newmodel. It absolutely
minimizes the disk space requirements of the sandbox, and virtually
eliminates the time it takes creating the sandbox (except the first time
it's used for a given kernel version, when it needs to build the kernel module).

-- 
-Eric 'shubes'

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Re: HTML::Parser [was: Re: [qmailtoaster] Clamav is OUTDATED.]

2008-02-12 Thread Eric "Shubes" 
lordfuknowsyou wrote:
> Hello and thanks for your response. I am sorry I wasn't more verbose in
> my explanation.
> 
> I gleaned that error from tail -f
> /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log during a bed
> the other night. If it wasn't that log specifically I know it was a log
> associated with the qtp-newmodel process because I was instructed to do
> just that by an interactive process.
> 
> I have updated, about 2 minutes after the email was sent out  :].
> 
> After an upgrade(of toaster through yum), reboot, a new non linked, non
> unioned(errors on that) sandbox.

It'd be nice to know what error(s) you received using the unioned sandbox so
it can be fixed. Please include the results of
# uname -a
# rpm -qa | grep kernel
with your description of the problem.

> I now receive new build errors, again gleaned from the above tail command.
> 
> tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log
> + rm -rf Mail-SpamAssassin-3.2.4
> + exit 0
> Installing spamassassin-toaster-3.2.4-1.3.13 in the sandbox ...
> error: Failed dependencies:
>perl(Archive::Tar) >= 1.23 is needed by
> spamassassin-toaster-3.2.4-1.3.13.i686
>perl(HTML::Parser) >= 3.43 is needed by
> spamassassin-toaster-3.2.4-1.3.13.i686
>perl(IO::Zlib) >= 1.04 is needed by
> spamassassin-toaster-3.2.4-1.3.13.i686
>Suggested resolutions:
>   
> /home/buildcentos/CENTOS/en/4.0/i386/CentOS/RPMS/perl-Archive-Tar-1.30-1.el4.noarch.rpm
>
> /home/buildcentos/CENTOS/en/4.0/i386/CentOS/RPMS/perl-IO-Zlib-1.04-4.2.el4.noarch.rpm

I know now where these are coming from, because I tried an upgrade last
night too and received these identical errors.

> I have not tried the suggested resolutions, because that still leaves me
> with an out of date parser.

I did a yum install of perl-Archive-Tar and perl-IO-Zlib and that fixed
those deps, but you're absolulely correct about the Parser package.

I have:
# perl -MHTML::Parser -e 'print "$HTML::Parser::VERSION\n"'
3.56
# rpm -q perl-HTML-Parser
perl-HTML-Parser-3.35-6

So perl "thinks" the package is up to date and so does yum, yet they're
reporting different versions. There appears to be a contradiction here.

> # rpm -qa perl
> perl-5.8.5-36.el4_5.2

I have:
# rpm -q perl
perl-5.8.8-5.el4s1_2

> I appreciate any suggestions. Many Thanks In Advance.

So, where to go from here? Looking at rpmforge, I see that they have an rpm
for (the latest) perl-HTML-Parser-3.56. If one was in a real hurry, you might:
# rpm -Uvh \
http://dag.wieers.com/rpm/packages/perl-HTML-Parser/perl-HTML-Parser-3.56-1.el4.rf.i386.rpm

However, I'd like to have the rpmforge packages available to yum in the
future, so I:

# cd
# wget \
http://dag.wieers.com/rpm/packages/rpmforge-release/rpmforge-release-0.3.6-1.el4.rf.i386.rpm
# rpm -ivh rpmforge-release-0.3.6-1.el4.rf.i386.rpm
# yum -y perl-HTML-Parser

That installed perl-HTML-Parser-3.56 from rpmforge, putting rpm back in sync
with CPAN:
# rpm -q perl-HTML-Parser
perl-HTML-Parser-3.56-1.el4.rf

So I'm proceeding to rerun qtp-newmodel, building a new sandbox (again -
that unionfs feature is sweet when it works). I'm guessing that it'll all
work this time. I'll keep you posted.

-- 
-Eric 'shubes'

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED now is 0.92 but don't work needed 0.92.1

2008-02-12 Thread Randraa 
I installed here this version of clamav 0.92 ( 
http://www.qmailtoaster.org/download/develop/clamav-toaster-0.92-1.3.16.src.rpm , 
encountered on qmailtoaster.

Ok, installed here, but return other error.
it proceeds below

[EMAIL PROTECTED] rafa]# freshclam
ClamAV update process started at Tue Feb 12 08:05:13 2008
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.92 Recommended version: 0.92.1
DON'T PANIC! Read http://www.clamav.net/support/faq
main.inc is up to date (version: 45, sigs: 169676, f-level: 21, builder: 
sven)

Downloading daily-5784.cdiff [100%]
daily.inc updated (version: 5784, sigs: 40364, f-level: 21, builder: 
ccordes)
Database updated (210040 signatures) from db.br.clamav.net (IP: 
64.246.134.133)


Now my version is 0.92 but recommed version is 0.92.1 and my updates dont 
work perfectly \=


How to fix it?

Thanks for all.



- Original Message - 
From: "Andreas" <[EMAIL PROTECTED]>

To: 
Sent: Tuesday, February 12, 2008 6:52 AM
Subject: Re: [qmailtoaster] Clamav is OUTDATED.



Hi Jim,

I think your syntax is not correct like that and Dan has forgotten to
really install the rpm.
Should be:
rpmbuild --rebuild --with cnt40 ... to build the binarys and then

rpm -Uvh   your clamav...rpm  to install it.


Andreas

Am Montag, den 11.02.2008, 15:56 -0500 schrieb Jim Shupert, Jr.:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4)
clamav-toaster-0.92-1.3.16.src.rpm

thanks!
jS

- Original Message - 
From: Dan McAllister

To: qmailtoaster-list@qmailtoaster.com
Sent: Monday, February 11, 2008 1:40 PM
    Subject: Re: [qmailtoaster] Clamav is OUTDATED.


Update the CLAMAV RPM from the devel website...

Step by step:
 1) Download the clamav src.rpm from
http://devel.qmailtoaster.com/ (latest I see is from December,
2007)
 2) STOP Qmail (qmailctl stop)
 3) STOP FreshClam (on Redhat/Fedora/CentOS you could use:
service freshclam stop)
 3) WAIT for all the processes to truly stop (you can use
variants of ps and kill if you're impatient)
 4) run the install for clamav
 rpmbuild --rebuild --with ($YOURDISTRO)
clamav-toaster-0.92-1.3.16.src.rpm
 5) RESTART freshclam (service freshclam start)
 6) RESTART qmail (qmailctl start)

The error message will go away TOMORROW

I hope this helps someone!

Dan


Daniel McAllister, President

IT4SOHO, LLC
224 - 13th Avenue N
St. Petersburg, FL 33701

877-IT4SOHO: Toll Free
727-647-7646 In Pinellas
813-464-2093 In Hillsborough
727-507-9435 Fax Only

"When did you do your last backup?"

Ask me about unattended offsite backup solutions...
to protect your business, not just your data!


Randraa - Yahoo wrote:
> About the error:
> WARNING: Your ClamAV installation is OUTDATED!
> WARNING: Local version: 0.90.1 Recommended version: 0.92
> DON'T PANIC! Read http://www.clamav.net/support/faq
> main.cvd version from DNS: 45



-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED now is 0.92 but don't work needed 0.92.1

2008-02-12 Thread Erik A. Espinoza 
I will release an update in a day or two. I like to test them out
before releasing and this one just came out yesterday.

EE

On Feb 12, 2008 5:06 AM, PakOgah <[EMAIL PROTECTED]> wrote:
> DON'T PANIC! as the output said.
> You are already installing the latest qmailtoaster's clamav package
> as long as there are no error on clamav log, then clamav is working fine
> please wait while qmailtoaster developers provide the latest clamav
> version on qmailtoaster site
>
> I think these lines should get more attention:
> main.inc is up to date (version: 45, sigs: 169676, f-level: 21, builder:
> sven)
> daily.inc updated (version: 5784, sigs: 40364, f-level: 21, builder:
> ccordes)
> Database updated (210040 signatures) from db.br.clamav.net (IP:
> 64.246.134.133)
>
> ps: thx u for reminding me, I am still using ver 0.91.1 :)
>
> Randraa wrote:
> > I installed here this version of clamav 0.92 (
> > http://www.qmailtoaster.org/download/develop/clamav-toaster-0.92-1.3.16.src.rpm
> > , encountered on qmailtoaster.
> > Ok, installed here, but return other error.
> > it proceeds below
> >
> > [EMAIL PROTECTED] rafa]# freshclam
> > ClamAV update process started at Tue Feb 12 08:05:13 2008
> > WARNING: Your ClamAV installation is OUTDATED!
> > WARNING: Local version: 0.92 Recommended version: 0.92.1
> > DON'T PANIC! Read http://www.clamav.net/support/faq
> > main.inc is up to date (version: 45, sigs: 169676, f-level: 21,
> > builder: sven)
> > Downloading daily-5784.cdiff [100%]
> > daily.inc updated (version: 5784, sigs: 40364, f-level: 21, builder:
> > ccordes)
> > Database updated (210040 signatures) from db.br.clamav.net (IP:
> > 64.246.134.133)
> >
> > Now my version is 0.92 but recommed version is 0.92.1 and my updates
> > dont work perfectly \=
> >
> > How to fix it?
> >
> > Thanks for all.
> >
>
>
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED now is 0.92 but don't work needed 0.92.1

2008-02-12 Thread PakOgah 

DON'T PANIC! as the output said.
You are already installing the latest qmailtoaster's clamav package
as long as there are no error on clamav log, then clamav is working fine
please wait while qmailtoaster developers provide the latest clamav 
version on qmailtoaster site


I think these lines should get more attention:
main.inc is up to date (version: 45, sigs: 169676, f-level: 21, builder: 
sven)
daily.inc updated (version: 5784, sigs: 40364, f-level: 21, builder: 
ccordes)
Database updated (210040 signatures) from db.br.clamav.net (IP: 
64.246.134.133)


ps: thx u for reminding me, I am still using ver 0.91.1 :)

Randraa wrote:
I installed here this version of clamav 0.92 ( 
http://www.qmailtoaster.org/download/develop/clamav-toaster-0.92-1.3.16.src.rpm 
, encountered on qmailtoaster.

Ok, installed here, but return other error.
it proceeds below

[EMAIL PROTECTED] rafa]# freshclam
ClamAV update process started at Tue Feb 12 08:05:13 2008
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.92 Recommended version: 0.92.1
DON'T PANIC! Read http://www.clamav.net/support/faq
main.inc is up to date (version: 45, sigs: 169676, f-level: 21, 
builder: sven)

Downloading daily-5784.cdiff [100%]
daily.inc updated (version: 5784, sigs: 40364, f-level: 21, builder: 
ccordes)
Database updated (210040 signatures) from db.br.clamav.net (IP: 
64.246.134.133)


Now my version is 0.92 but recommed version is 0.92.1 and my updates 
dont work perfectly \=


How to fix it?

Thanks for all.




-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Clamav is OUTDATED now is 0.92 but don't work needed 0.92.1

2008-02-12 Thread Ben Mills 
I updated to 0.92 a while back. All was fine until today when I got the 
same warning as you. Apparently 0.92 is now outdated.


Ben


Randraa wrote:
I installed here this version of clamav 0.92 ( 
http://www.qmailtoaster.org/download/develop/clamav-toaster-0.92-1.3.16.src.rpm 
, encountered on qmailtoaster.

Ok, installed here, but return other error.
it proceeds below

[EMAIL PROTECTED] rafa]# freshclam
ClamAV update process started at Tue Feb 12 08:05:13 2008
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.92 Recommended version: 0.92.1
DON'T PANIC! Read http://www.clamav.net/support/faq
main.inc is up to date (version: 45, sigs: 169676, f-level: 21, builder: 
sven)

Downloading daily-5784.cdiff [100%]
daily.inc updated (version: 5784, sigs: 40364, f-level: 21, builder: 
ccordes)
Database updated (210040 signatures) from db.br.clamav.net (IP: 
64.246.134.133)


Now my version is 0.92 but recommed version is 0.92.1 and my updates 
dont work perfectly \=


How to fix it?

Thanks for all.



- Original Message - From: "Andreas" <[EMAIL PROTECTED]>
To: 
Sent: Tuesday, February 12, 2008 6:52 AM
Subject: Re: [qmailtoaster] Clamav is OUTDATED.



Hi Jim,

I think your syntax is not correct like that and Dan has forgotten to
really install the rpm.
Should be:
rpmbuild --rebuild --with cnt40 ... to build the binarys and then

rpm -Uvh   your clamav...rpm  to install it.


Andreas

Am Montag, den 11.02.2008, 15:56 -0500 schrieb Jim Shupert, Jr.:

Hey thanks for this...
and just to be realll clear for me
my distro is centOS4.4   so would step 4 for me be

is the below the exact sysntax?

rpmbuild --rebuild --with ($centOS4.4)
clamav-toaster-0.92-1.3.16.src.rpm

thanks!
jS

- Original Message - From: Dan McAllister
To: qmailtoaster-list@qmailtoaster.com
Sent: Monday, February 11, 2008 1:40 PM
    Subject: Re: [qmailtoaster] Clamav is OUTDATED.


Update the CLAMAV RPM from the devel website...

Step by step:
 1) Download the clamav src.rpm from
http://devel.qmailtoaster.com/ (latest I see is from December,
2007)
 2) STOP Qmail (qmailctl stop)
 3) STOP FreshClam (on Redhat/Fedora/CentOS you could use:
service freshclam stop)
 3) WAIT for all the processes to truly stop (you can use
variants of ps and kill if you're impatient)
 4) run the install for clamav
 rpmbuild --rebuild --with ($YOURDISTRO)
clamav-toaster-0.92-1.3.16.src.rpm
 5) RESTART freshclam (service freshclam start)
 6) RESTART qmail (qmailctl start)

The error message will go away TOMORROW

I hope this helps someone!

Dan


-
QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]