SD> WTB super 60 KIT
Anyone With a Full Super 60 kit for sale please contact me with a price. I have FINALLY got my 87Daytona running up to par. Time to begin adding the sunlight to see the blossom. I am not 100% sure of all I need to get this super 60 thing going. As far as I know I will be looking for Super 60 Turbo Injectors Fuel Pump Both the LM and the PM? Wastegate/mount? I of course look forward to any input from all of SDML memebers. If someone will fill me in on everything i need to make this modification compete.I can be reached via email [EMAIL PROTECTED] or (605) 393-2189, Ask for Jim. Thanks,Jim Bauer 87Daytona (wifes) 79 Ramcharger ( Tank) - Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Exhaust?
Hey SD, Back with more questions, Getting tiem for some new pipe and muffler for the shelby. What should i get? Plan on a super 60 comparable up grade in the very near future. So when at the shop, what should i have them install with the conversion in mind so close to the future? Brand of muffler? 2.5" pipe correct? Thanks againf ro the support Jim Bauer. 87 2.2daytona shelby - Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> number of the car?
I see so many of you postin the prodution number of your shelbys. Where do I find that information? Jim Bauer, 87 shelby daytona 2.2 T II - Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Huh?
Today i installed a 2 items on my car and now i am having serious issues,. I still of course am working on my 87 Daytona Shelby. 2.2 TII I removed the factory Air Filter Box completely. In place of the Hose beginning at the inter cooler then entering the Air Box( a straight through design) then exiting and ending at the TB, I placed a 2.5" exhaust pipe. Then, I placed a K&N cone type Filter at the fresh Air inlet of the turbo. ( with a 2.5" tube as its connection) The plastic hose from the Power Module that enters the Air box was completely removed for the introduction to the K&N Then last but not least, the little PCV line that ran from the fresh air intake side of the air box, to the PVC junction boot, or grommet deal, that line was left open ( a baby K&N protecting it Right now) Symptom at hand is Seems to have a miss when just driving (putting) along, When I even attempt to hit the gas, the car has no real turbo power, and the most WEIRD part out of all this.. when i clutch, it sounds like loud Blow off Valve of some sort.( not equipped yet) the boost gauge in the dash even shows no Boost. Trouble shooting I have tried plug the little hose at the PVC line from the air box with no change in run ability Made a check for a good seal on the Turbo hoses. Ended up Dark out with no drop lights. . I also replaced wires, and plugs today 30 mins prior. gap 0.35, Belden 7mm wires. NKG V power plugs. Anyone know where I need to look? I will be inspecting vacuum in the morning. But If anyone knows off hand if this conversion is a problem. I would love to know As i Said before, Of course there is no hose from the Power Module to the air box any more, is that a problem? Thank, Jim Bauer 88Daytona, 79 Ramcharger - Do you Yahoo!? Yahoo! Mail - You care about security. So do we. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> A-555
Had a melt down on the interstate last weekend. 5th gear is soo toast. I have my Tranny at Inland Truck parts (Rapid City). They can not seem to find parts for it. Anyone know of a place i can buy new parts for this A-555? Will be needing the whole gear sets, Syncro ect ect ect. thanks SDML. Jim. 87 Daytona 2.2 TII - Do you Yahoo!? Win 1 of 4,000 free domain names from Yahoo! Enter now. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Camber
I work for rapid tire and alignment, I have never seen ANY vehicle run any more then .5 neg camber on the passenger side. From all my experience 3/8 positive camber on the driver with 0 camber on the passenger side to be the most optimum. I run that on my 87 daytona with 1/16 of toe in hope this helps. However, there is such a large range of camber setting that can work. But for tire wear and daily driving, the above mentioned specs are just the general setting we use on 90% applications. Jim Bauer. Johnny Spiva <[EMAIL PROTECTED]> wrote: Are there any type of aftermarket camber kits available for the L bodies? I think the bolts that adjust the camber wont allow me to kick the camber in a little bit.. Id like about 2 - 3 degrees worth of negative camber.. == Waay too much camber! "IF" you want lots of camber you do NOT need a kit to do it. Just use a round file on the slots on the struts and you can get almost 3 degrees neg. camber. JUST remember that this really hurts straight line performance. IF you ad a strut tower brace and a k-frame brace and have firm springs and anti-sway bars, use 1 degree negative camber. Johnny http://www.polybushings.com _ Get ready for school! Find articles, homework help and more in the Back to School Guide! http://special.msn.com/network/04backtoschool.armx ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html - Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS- A-555 core
Got a core for a A-555, 5th gear went out. Its already torn down, boxed up and ready to ship. Make offer, its just trash to me. Payshipping. Jim Bauer 605 393 2189 87daytona shelby TII - Do you Yahoo!? Shop for Back-to-School deals on Yahoo! Shopping. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> weight of the A555
How much does a A-555 weigh? Its the 385ratio, all stock. No clutch assy. From a 1987 Daytona Shelby make it easier for me to find out the shipping cost to some of you whom are interested. thx Jim. - Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Fluid for a555
Just installed a A555 in to my Daytona. It has never been in a vehilce before. I just need to know the best choice for the fluid. It has a limited slip diff installed also. Also need to know the best choice for fluid capacity. thx guys - Do you Yahoo!? vote.yahoo.com - Register online to vote today! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> about a guy
Hello SDML. Just thought i would drop a line to you all with my experience with Henry Blair. I just purchased a A555 from him. I have always been skeptical about giving up money, and having nothing to show for it,(paypal ect ect) However, when i made my purchase from Henry, A few minutes with him on the phone laid that feeling to rest. If any of you are looking for some really great deals, on many of his parts he has left to sell.. dont pass it up. this guy deals straight up. Last I spoke at him, he was getting ready to post numerous items on SDML for us to snag up before the whole world gets a chance at them, So if you see him posting better get while the gettings good ! Thx Henry, trannys a bute ! Jim Bauer - Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> 782 head
Hello again SDML. I have a 100% rebuilt 2.2 782 head for sale. This has never been run on a motor since rebuild. brand new everything. was glass beaded so it looks sharp also... The bad new is the machine shop gave me the wrong cam caps, i went to torque them down and noticed a gap between the cap and tower... thought i might add some more torque to it thinking it was just a "burr" of some sort and then SNAP broke number 3 cam tower off. about 50% of the way down the thread is where the break is.. I think i have the piece for it for anyone whom want to weld it. but might as well use for parts. Please make cash offer on the head and pay shipping. Will give shipping quotes on request. Thx again. Jim Bauer 605 393 2189 - Do you Yahoo!? vote.yahoo.com - Register online to vote today! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> shifter cable?
I just installed that new A555 I have my linkage all in place correctly. However when i try to shift to 2nd or 4th it feels like there is nothin there... it bottoms out on the stick and dont engage.. sometimes it will though.. but none the less it feels as if there is nothin there. Durin install of the tranny, my friend ( we think) popped out the brass tube that goes over the cable, at the actual hook up on the tranny "fork" We tried to pop it back in but were not sure if it went or not. Will that cause the problem? if so can it be popped back in with it remaining reliable? If not, anyone know the average price on one, the proper name for that cable and the headache affiliated with its R&R? Jim 87 daytona 2.2 TII - Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> back and forth
Wife ran into a problem with the old Daytona today, She described to me that when she would be on the gas pedal the stearing wheel would go back and forth. She said it was doing in bad. Though, when she let off the gas pedal it would stop.. Anyone had this problem and know where to point me? I have not been able to look at the car, I just got the call about 5 mins ago. Its an 87 dodge daytona turbo II Thx Jim - Do you Yahoo!? vote.yahoo.com - Register online to vote today! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> RE: A-555
Well, in my opinion, the A-55 is just to good to give up. Talk to Pure energi, He had one for sale that was just gone through. I belive he wanted 550$. Also, Talk to Cliff Ramsdell, I can not for the life of me remeber his Email Address, but he always has an Fresh A-555 to part with. He whats been called "The local SD tranny guy " Hope this helps you out in some way. Jim. 87 Daytona TII - Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> s60 conversion
Hi folks, finally have my s60 lined up, have a few questions. I am installing it on a 87 2.2. I have the PM and LM, So I need to convert it over to the SMEC. anyone have a link or a friend who has the under hood wiring harness for sale? Am I correct in this being a feasible conversion? the car the s60 is in is not very nice. Mine is and I have a brand new motor and a brand new a555 with a clean body and interior.. Is this wiring computer conversion just R&R? or do i need other things to go with it? Do i need an under the dash wiring harness as well? to make up for the LM wires? anyone know what size my 2 piece intake needs to be ported to? also the head? also interested in purchasing a 52mm TB. anyone have a good used one? Jim 87 2.2 daytona - Do you Yahoo!? Discover all thats new in My Yahoo! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Parts
I have some parts up for sale, please look through, I have lots to offer I have a full 3 piece set of I think FWD performance 2.5 mandrel bent exhaust that fits an 88 Tona 2.2 comes with a turbo muffler. This is less then 50 miles old. I believe he paid around 130ish plus Ship.. 100 for all and the mufflers free. you pay shshippingDIV> Entire 88 Dodge Daytona Shelby 2.2 body. no rust at all that I have seen. one dent in the driver door that i put in it with my Ramcharger. Will part out body parts, make offers please. you pay shshippingDIV> Glass from Same car. All glass is perfect, even tinted=)... NM i lied windshield is toast... , Rear Defroster works 100% Make offers, pay shshipping/DIV> Front seats with the electric "seat wings" lumbar susupportnd Thigh susupportll electric also.. I believe the Thigh bladder leaks.. been a year or so since i checked.uupholsterynbsp;is in real nice shape, can use a washing. Grey in color Instrument cluster.. SStaringwheel in very nice shape. offer +SH rear seats nice shape also. Grey in color. Offer+SH axles x2 seem oOK. no tears in the boots.. Offer +SH A 555 TTrans axle clutch is thrashed, runs and drives fine, grind going in to 5th... that however is not related to the clutch. Syncs?? Offer+SH New head never ran on engine, 1 tower ppartiallybroke, no cam caps (thx to Johnson machine!) the head is 100% stock and never ran. offer +SH 1 piece intake manifold from 2.2 TII, Black in color with an almost blue pearl shine to it. clean. offer +SH Exhaust Manifold Same engine. Offer+SH Very clean Super 60 SMEC works fine, ( using a stage 5 calibration instead on my 87) Offer please +SH List goes on... block + all the internals. Offer +SH you name it I have it.. Offer+SH complete 2.2 TII with 55k Odometer read miles. + tranny.. i believe Its a 523?? the turbo is wasted. motor and tranny are Removed from that car. Offer on what ya need +SH ~`` I have to pull some of these parts off the car upon request. Some of it has already been pulled for personal use. please bear with me. All parts are in Rapid City South Dakota. 57703 I offer this warranty. I sell as is, this car was sold from me near 1 or so years ago, and I have recently re acquired it.if there are any problems, and you are not happy; Just call me, or email me. I have dealt with Dave Grove. I have also dealt with Henry Blair. Jim Bauer 605 393 2189 57703 - Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Head Bolts.
Need a new set of head bolts and the hold down washer looking deals =) any particular site to go to for upgraded bolts? Need the mopar performance head gasket as well. Thanks Folks. Jim Dodge Daytona Shelby Z 87 - Do you Yahoo!? The all-new My Yahoo! Get yours free! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Turbine Wheel Play?
Hi guys, got that super 60 the other day and the turbo was told to me was new, It looked new, very clean. But I pulled it all out of the car and was cleaning it upo and decided to spin the wheel.. seemed a bit harder to spin then my old one.. I passed that off as it being new and mine justr havin 120k miles on it... but what got me was the play.. It has side to side play in it. So of course i cheked the swing vale side and the play goes all the way through to that. Am I paranoid? or is this normal? I have been shopping for tons of thing to make this conversion and fear stickin all this cash and time in just to have a huge slap in the face. any ideas? Jim - Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Caliper
Needing to find a Right Rear Caliper for my 87 Dodge Daytona, 2.2 TII Its the 2 pin mounting. I have 2 of then here but both are froze up. Please reply with Price if you have one cheaper then the crooked parts store ! thx Jim. - Do you Yahoo!? Jazz up your holiday email with celebrity designs. Learn more. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Boost Gauge
Hello, I have installed a Autometer "Ultra Lite" Boost Gauge in to my Daytona. I am not sure where to plumb this Boost gauge in? I have tried to plumb it into the factory Vac/Boost gauge, with no luck. This need to go somewhere else? Jim - Do you Yahoo!? Meet the all-new My Yahoo! Try it today! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS 2.5 Mandrel
Howdy, I have listed this item before, the person that was interested has passed it up for other the holiday costs. So I will offer this again. For Sale: Full 3 peice 2.5inch Mandrel Bent FWD performance (i think is wherehe purchased it) Exhaust system. this includes a Turbo muffler and all the mounting hardware (u bolts) there are approxamilty 6 u bolts. this entire System is in 100% new condition, very clean. can not have more then 50 miles on it. starts at the swing valve. this was bought to Fit a 88 daytona. i am not sur ewhat he paid but i think it was prolly 130$ +SH/Plus the cost of the muffler I will take 110$ for it all, you pay shipping from zip code 57703 the muffler and mounting hardware, will be a free gift. Jim Bauer, Rapid City South Dakota. 57703 605 393 2189 - Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Spr 60 Smec FS
this is in very nice cosmetic shape, I purchased it in a SPR 60 conversion kit. I use the Logic Module, so SMEC is a boat anchor for my application. Not sure what its worth.. offers would be best. Pay for shipping. thx guys/gals Jim Bauer - Do you Yahoo!? Yahoo! Mail - You care about security. So do we. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> 2.5 mandrel
For Sale: Full 3 peice 2.5inch Mandrel Bent FWD performance (i think is where he purchased it) Exhaust system. this includes a Turbo muffler and all the mounting hardware (u bolts) there are approxamilty 6 u bolts. this entire System is in 100% new condition, very clean. can not have more then 50 miles on it. starts at the swing valve. this was bought to Fit a 88 daytona. i am not sur ewhat he paid but i think it was prolly 130$ +SH/Plus the cost of the muffler I will take 110$ for it all, you pay shipping from zip code 57703 the muffler and mounting hardware, will be a free gift. Jim Bauer, Rapid City South Dakota. 57703 605 393 2189 - Do you Yahoo!? Yahoo! Sports - Sign up for Fantasy Baseball. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> 2.5 mandrel
Howdy, I have listed this item before, the person that was interested has passed it up for other the holiday costs. So I will offer this again. For Sale: Full 3 peice 2.5inch Mandrel Bent FWD performance (i think is wherehe purchased it) Exhaust system. this includes a Turbo muffler and all the mounting hardware (u bolts) there are approxamilty 6 u bolts. this entire System is in 100% new condition, very clean. can not have more then 50 miles on it. starts at the swing valve. this was bought to Fit a 88 daytona. i am not sur ewhat he paid but i think it was probably 130$ +SH/Plus the cost of the muffler/and mounting hardware I will take 100$ for it all, you pay shipping from zip code 57703 the muffler and mounting hardware, will be a free gift. Jim Bauer, Rapid City South Dakota. 57703 605 393 2189 - Do you Yahoo!? Yahoo! Small Business - Try our new resources site! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> super 60
unfortunatly, this 87 Daytona is just getting the best of me. I have invested near 11,000 dollars in it and its just not going to get an other dollar from me. so I am selling a few parts that i planed on using but have choose to leave behind Super 60 Turbo assy ( new Echlin core) 782 head, MP springs, 3angle valve grind, back cut valves, mild port and polish fully assembled 40% injectors, super 60 SMEC, 3 bar map sensor. this kit will include the intake (1 peice) that is attached. please make cash offers. I know what i would like to get, but if i get more.. then thats even better. All parts have no more then 100 miles on them (according to an SDML member who they were purchased from) As soon as i get a title for the car, it will be sold as a whole. will keep up to date. Jim Bauer Rapid City South Dakota 605 393 2189 - Do you Yahoo!? Yahoo! Small Business - Try our new resources site! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> 87 Shelby Daytona
Hello folks, going to sell my car as a whole. 87 Daytona Shelby T2/ 2 baby spots of rust on rear quater.. the paint is good shape. white in color, interior is blue. Brand spanking new motor (5-10k miles the thing looks great, all clean and shiny. hoses are covered in purple line covers. it just looks great and snazy this engine has every thing new on it. MAP sensor, Fuel injectors, FP regulator, TPS. I mean everything. Custom built cold air intake, can not even tell its custom builts, looks like a million bucks, painted a Mirage 3 step color. K&N cone filter. had a nice and loud BOV in it. 2peice intake. the turbo is origanal 3inch exhaust, Magnaflow performance muffler(was like 110 for muffler alone) Nice CD player, Rockford 10" subs (2005 models) 500 watt Rockford AMP (2005 model) Eclipse 5.5s in the rear and ALpine Type S 4s in the door. interior is supurd shape (needs head liner) Grant GT wheel (grey) Firestone Firehawks on all four wheels Crab rims Brand NEw/not a rebuilt!! A-555, this tranny has been in one car (mine) it has no more then 2000Miles on it. brand-new aftermarket Limitedslip Diff ( was installed from Ed Peterson) this tranny is just as tough as can be and the Posi is nice and tight. great tranny!! new axles! no more then 200miles on them new motor mounts maybe 100miles on them, real nice looking winsheild wipers (white snake skin) New shocks/Struts (stock) Fresh Alignment ( i work for rapid tire and alignment) brand new Power Module ( maybe 3000miles on that) New LM (same miles) Distributor brand spanking new ( right out of Dodge towns doors) wires new "Belding"( lifetime warrently from any Napa) Plugs new. fule pump brand new (stock) Super 60 BRAND NEW ( puchased from a SDML member, has 100miles on it) NEw head MP springs, 3angle valve grind, back cut valves 40% injectors .. all these parts are less them 100miles, including the head. full 3peice 2.5 inch mandrel bent FWD performance exhaust. inclused brand new mufller. less then 50 miles on this. also included is a 88 Dodge daytona needs Tranny, and head. rest car basically complete.enough parts to put this one together!! and have 2 (one dent in car, paint sucks, 0 rust.) very nice seats. motor runs strong, boosts nice, I lOVED this car. currently running rich. /shrug but I have over 10,000dollars tied up in it. so I HATE IT at the same time. Wife and I are purchasing a house in july and need the cash. I can provide ANY receipt you could ask for. I have 90% of them still. do not let this pass you up, if you have some of thatg cash under your materess, then get on the phone and call me. 605-393-2189 Jim Bauer I am not asking NEAR what I have in this ,and can prove I have in this. must come get it. both cars go together. best bring trailor for the 88. I include any thing you see that is Shelby related. if you see a Shelby poster and you want it. you take it. I am done done done done Jim BAuer, rapid city South Dakota 57703 __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD> boost lose, fludder noise
Just a guess, but if this is a 2.2 TII I would say you have an intercooler hose loose. check the clamps and for good coverage. If that is the problem, then whats happened is the turbo is causing the "fluttering" when you clutch, the compressser is blowing back out the pressure. you obvioulsy loose lots of boost also. Jim "Mullikin, Stefan P" <[EMAIL PROTECTED]> wrote: A little more information would help. What is the make, model and year of your car? What mods, if any, are you running? Do you have access to a compressed air source to pressurize the hoses with to listen for leaks? Stefan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, May 11, 2005 4:36 PM To: shelby-dodge@imagicomm.com Subject: SD> boost lose, fludder noise been having trouble getting up to boost, been looking for a leak. Now i hear a fluttering noise, when my r.p.ms are high.before it shifts. and when i hit 75m.p.h i hear it all the time. any guess? ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html - Yahoo! Mail Mobile Take Yahoo! Mail with you! Check email on your mobile phone. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> power loss light
the 87 t2 2.2 still runing sickly bad, ran on board codes with the ignition switch and got a 1,33,35,2,55 this dont look right. car running real rich and dies when I let off gas pedal. runs like i got a HUGE cam in it. black smoke out the pipe. .I have the 3way rubber conector that comes off of the valve cover pluged on one end. the PCV side is not pluged up. I did this when i made a cold ait intake and needed to get rid of the "trumpet" looking pipe that came off that 3 way conector. I also have oil coming out of everywhere under the hood. mainly happens when i get on the turbo hard, then clutch... Anyone??? Jim 87, 2.2 T2 daytona shelby - Discover Yahoo! Find restaurants, movies, travel & more fun for the weekend. Check it out! ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Link?
anyone have the link to the "boosted Mopar" video? I am refering the the 20 min video composed of numerous fwd turbododge cars showing their stuff. it begins with an older gentleman explaining how cheap it can be to build a turbo dodge (he is driving and omni. Jim Bauer. - Yahoo! Mail Stay connected, organized, and protected. Take the tour ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> RE: Le Mans Wheels
Hey Henry, how ya been bud. Looks like you moved to a new town? Any how. I would like to see a picture of these "Wheels" that have caused much controversy. drop us a picture ! Hope you have been well. That A-555 you sold me is a monster! love that posi. Jim ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> nice car FS
87 daytona New motor. maybe 5k miles. can provide proof. looking at it should be proof enough new A-555 has maybe 1000 miles on it. not a rebuilt. super 60 kit missing the map sensor and the SMEC for those 88 and up. kit inclused head 3 angle valve grind/ back cut Valves. mild port and polish. not installed on the car at this time. 3 inch exhaust, magnaflow performance muffler. also inclused full 2.5 inch mandrell bent system. new everything. shocks,axles, alternator, waterpump.. everything new. have probably 5,000$ in receipts. JL audio 5" door speakers, eclipse 5.25 rear speakers. interior exellent. needs headliner. no tears/stains cracks on dash or seats. all the glass is chip/crack free. we have more money tied up in this car then you can shake a stick at. South Dakota car. 1 or 2 small rust spots. maybe 2" diamater at the most. sweet looking coldair intake. runs rich right now. not want to put ONE MORE dollar into it. has boost pillar pod/guage hooked up . Car is White. crab wheels. junk yard Logic module, brand spanking new power module. very clean under the hood. NO TITLE, been mine for over 3 years. make offer. it will take litle money to get this car from me. 381 8365 Jim Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html