[AFMUG] B5 Lite

2015-09-24 Thread Stefan Englhardt
Hi, just got the availability anouncement. I do not see the point of B5 Lite for a Wisp. It is a single .ac radio like UBNT or MT without sync or filtering. But if it shows the same level of colocation interference problems as B5 does (you have to separate it 3m from other gear or

Re: [AFMUG] Injector Current Monitoring and Overcurrent Protection.

2015-09-24 Thread Wireless Administrator
Anything that makes it easier to reliably keep the radio’s powered up is worth the effort. I know the new auto reset on power overload firmware is a game changer here. If being able to accurately read voltage makes this feature easier to support in future devices it seems like $5/port would be

Re: [AFMUG] Careful out there, Wireless installer shocked..

2015-09-24 Thread George Skorup
Hope he'll be OK. They don't put those "WATCH FOR WIRES" stickers on antennas for nothing. On 9/24/2015 7:35 AM, Roland Houin wrote: http://www.wndu.com/home/headlines/Man-shocked-taken-in-ambulance-from-St-Joseph-County-neighborhood-328916901.html

[AFMUG] Careful out there, Wireless installer shocked..

2015-09-24 Thread Roland Houin
http://www.wndu.com/home/headlines/Man-shocked-taken-in-ambulance-from-St-Jo seph-County-neighborhood-328916901.html

Re: [AFMUG] [WISPA Members] Tower Structural Analysis Vendors

2015-09-24 Thread Lewis Bergman
I guess those tactics work on some. Of course I don't require structurals unless the tower is getting close to its max. On Thu, Sep 24, 2015, 12:20 AM Eric Kuhnke wrote: > Or just ask for an original wet stamped as built schematic of the tower, > you would be surprised

Re: [AFMUG] B5 Lite

2015-09-24 Thread Darin Steffl
I see it being a good product for less than a mile shot to connect buildings together. So like a business needs a high bandwidth connection without putting in fiber, we could use the B5-Lite which still has auto channel and it would provide up to 750 Mbps aggregate throughput for under $300 for a

[AFMUG] Tower Worker Critically Injured

2015-09-24 Thread Jeff Broadwick - Lists
I'm sure prayers and thoughts will be greatly appreciated. http://m.southbendtribune.com/news/publicsafety/worker-seriously-injured-while-working-on-wireless-tower/article_193a6668-fd4a-591c-94c5-5beb56f5ec42.html?mode=jqm Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office

Re: [AFMUG] Fulton County, GA discovers new and amazing 3000+km MW path

2015-09-24 Thread Hardy, Tim
Typical example of the many errors one can find in ULS and why it’s a bad idea to use this data for interference analysis / coordination. To make this particular example even worse, the receive call sign is supposed to be WNTN687 – but the transmit license in the example (WNEQ438) is still

Re: [AFMUG] Reel trailers

2015-09-24 Thread David
I know how to get them stuck and break em LOL On 09/23/2015 06:09 PM, Lewis Bergman wrote: They will go up and over most anything. On Wed, Sep 23, 2015, 6:09 PM Lewis Bergman > wrote: If you buy one to drive on the highway you

Re: [AFMUG] Reel trailers

2015-09-24 Thread David
Stay in the TANK! https://www.youtube.com/watch?v=0NS5sbmqL9Q On 09/23/2015 06:09 PM, Lewis Bergman wrote: They will go up and over most anything. On Wed, Sep 23, 2015, 6:09 PM Lewis Bergman > wrote: If you buy one to drive

Re: [AFMUG] B5 Lite

2015-09-24 Thread Stefan Englhardt
Yes. They are cheap and I guess they perform well. But we've seen even with a lot of frequency separation our B5s are hurt by colocated radios. Support tells us to separate the radios by at least 3 meters. If you can separate them enough you'll sure be happy with them. We cant use 5.1 ...

Re: [AFMUG] To be or not to be

2015-09-24 Thread Mathew Howard
So we should kick anyone that vapes out of animal farm? :P On Thu, Sep 24, 2015 at 9:31 AM, That One Guy /sarcasm < thatoneguyst...@gmail.com> wrote: > no, those are douchebags > > > On Wed, Sep 23, 2015 at 10:47 PM, Ken Hohhof wrote: > >> These days, maybe the bad kids vape.

Re: [AFMUG] [WISPA Members] Tower Structural Analysis Vendors

2015-09-24 Thread Jeremy
I thought a structural was always more than $3K? On Thu, Sep 24, 2015 at 8:49 AM, Darin Steffl wrote: > We have tower drawings and original structural analysis from tower owners. > They just want an analysis done on our additional load. I was hoping to > find a vendor

Re: [AFMUG] [WISPA Members] Tower Structural Analysis Vendors

2015-09-24 Thread Lewis Bergman
That is on the high side. I have a guys card at the office that would/should do it for leads than $1k On Thu, Sep 24, 2015, 10:01 AM Jeremy wrote: > I thought a structural was always more than $3K? > > On Thu, Sep 24, 2015 at 8:49 AM, Darin Steffl

Re: [AFMUG] To be or not to be

2015-09-24 Thread That One Guy /sarcasm
no, those are douchebags On Wed, Sep 23, 2015 at 10:47 PM, Ken Hohhof wrote: > These days, maybe the bad kids vape. > > *From:* Chuck McCown > *Sent:* Wednesday, September 23, 2015 2:29 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] To be or not to be > >

Re: [AFMUG] Reel trailers

2015-09-24 Thread Mathew Howard
Can you actually those to drive on the highway? On Wed, Sep 23, 2015 at 6:09 PM, Lewis Bergman wrote: > If you buy one to drive on the highway you are crazy. This is an actual > army humvee out of Fort Bragg. They auctioned a few hundred nationwide so I > picked over

Re: [AFMUG] To be or not to be

2015-09-24 Thread That One Guy /sarcasm
if theyre being douches probably. Us cigarette smokers know that blowing a cloud of smoke at somebody is akin to saying "lets fight". Vapers think its cute, thats why dentists like vapers, they dont have to smell that ashtray smell while theyre trying to put teeth back in peoples heads. On Thu,

Re: [AFMUG] B5 Lite

2015-09-24 Thread Rory Conaway
There are tons of use for this radio. The radio pushes about 450mbps with no problem with 80MHz channels for $300. How could you not find a place for this? I'm planning on upgrading a bunch of Nanostations that are doing nothing but that on short range links. Even without sync, there is a

Re: [AFMUG] [WISPA Members] Tower Structural Analysis Vendors

2015-09-24 Thread Darin Steffl
We have tower drawings and original structural analysis from tower owners. They just want an analysis done on our additional load. I was hoping to find a vendor to do this under 1k since it should be quick and easy with all the info we can provide. So far, only one vendor has been recommended.

Re: [AFMUG] Reel trailers

2015-09-24 Thread Lewis Bergman
Well, the US government can drive them anywhere they want, we did. But I doubt I'll be able to get license plates for it. I am going to try though. I know a couple of people that own car dealerships. If not, the primary use is still valid. Then when I am done I'll sell it to some oil man for his

Re: [AFMUG] Reel trailers

2015-09-24 Thread Lewis Bergman
Sorry, that is a state thing. Besides, I didn't file for the next election so I only have a couple more months. On Thu, Sep 24, 2015, 10:14 AM Jaime Solorza wrote: > Hey wait , you are the mayor. Make your own plates > On Sep 24, 2015 9:10 AM, "Lewis Bergman"

Re: [AFMUG] Reel trailers

2015-09-24 Thread Ken Hohhof
And only in Illinois do elected officials go to prison and make license plates. From: Lewis Bergman Sent: Thursday, September 24, 2015 10:19 AM To: af@afmug.com Subject: Re: [AFMUG] Reel trailers Sorry, that is a state thing. Besides, I didn't file for the next election so I only have a

Re: [AFMUG] Reel trailers

2015-09-24 Thread Jaime Solorza
Hey wait , you are the mayor. Make your own plates On Sep 24, 2015 9:10 AM, "Lewis Bergman" wrote: > Well, the US government can drive them anywhere they want, we did. But I > doubt I'll be able to get license plates for it. I am going to try though. > I know a couple

Re: [AFMUG] Injector Current Monitoring and Overcurrent Protection.

2015-09-24 Thread Mathew Howard
I agree, being able to check current is nice, but I really don't think it's particularly important. On Wed, Sep 23, 2015 at 8:04 PM, Josh Luthman wrote: > Not even worth $5 IMO. > > I've never ever once used the feature on your products. I measure the > amperage

Re: [AFMUG] Injector Current Monitoring and Overcurrent Protection.

2015-09-24 Thread Bill Prince
We monitor the current being used on the sync injectors, but don't have any alerts set on abnormally high/low conditions. When I look at the current usage, I only really am looking for "ballpark values". So I don't expect extreme accuracy, but being able to monitor the value within a parsec

Re: [AFMUG] Tower Worker Critically Injured

2015-09-24 Thread Chuck McCown
Gotta wonder if he got into primary or secondary voltage. And if primary why was it so close to a tower. If secondary must have been one of those fluke where 120 or 240 stops someone’s heart. I was up a tower at about the 200 foot level to change a bulb once. The red glass cover gasket was

Re: [AFMUG] B5 Lite

2015-09-24 Thread Mike Hammett
Everyone always says 3m separation. That's usually not possible. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Stefan Englhardt" To: af@afmug.com Sent: Thursday, September 24, 2015 9:45:15 AM Subject:

Re: [AFMUG] B5 Lite

2015-09-24 Thread Rory Conaway
And keep in mind they run in 4.9GHz. That’s huge. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett Sent: Thursday, September 24, 2015 8:28 AM To: af@afmug.com Subject: Re: [AFMUG] B5 Lite Everyone always says 3m separation. That's usually not possible. - Mike Hammett

Re: [AFMUG] Tower Worker Critically Injured

2015-09-24 Thread Josh Luthman
Of course you didn't drop it. You couldn't if you wanted to... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Sep 24, 2015 at 11:44 AM, Chuck McCown wrote: > Gotta wonder if he got into primary or secondary voltage.

Re: [AFMUG] Tower Worker Critically Injured

2015-09-24 Thread Jaime Solorza
I got shocked on public safety tower in Chihuahua City in mid 1990s. Belt kept me safe but boy did it hurt.. Exposed tower light wires hidden under 23Ghz radio mount. Got my exposed wrist and hurt like hell. I think I glowed for day... On Sep 24, 2015 10:35 AM, "Josh Luthman"

[AFMUG] ARIN Region IPv4 Free Pool Reaches Zero

2015-09-24 Thread Matt
http://seclists.org/nanog/2015/Sep/656

Re: [AFMUG] Tower Worker Critically Injured

2015-09-24 Thread Jeff Broadwick - Lists
A bit more info and some video. Not a big tower. http://m.wsbt.com/news/man-shocked-while-working-on-power-line-in-st-joseph-county/35448372 Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell jbroadw...@converge-tech.com > On Sep 24, 2015, at 12:34 PM, Josh

Re: [AFMUG] Tower Worker Critically Injured

2015-09-24 Thread Chuck McCown
Way too close to that power line. From: Jeff Broadwick - Lists Sent: Thursday, September 24, 2015 12:59 PM To: af@afmug.com Cc: Wispa Members List Subject: Re: [AFMUG] Tower Worker Critically Injured A bit more info and some video. Not a big tower.

Re: [AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread Ken Hohhof
I really wish he had left my company out of it. And the regulatory burden on a small ISP has nothing to do with not being allowed to charge content providers. But I do think he is correct this is about the power balance between content providers and ISPs, and not really about protecting retail

Re: [AFMUG] Tower Dish Mount

2015-09-24 Thread Sean Heskett
Chuck would probably modify it for ya if you ask him. Other option is you could build one yourself out of unistrut (available at most electrician shops and prolly big box hardware stores) -Sean On Thursday, September 24, 2015, Matt wrote: > Have a 3 foot 11ghz

Re: [AFMUG] Zoo Charity Repelling Event

2015-09-24 Thread Jaime Solorza
I have repelled down hills and trees as adult. As punk kid we repelled down Piggly Wiggly escaping sheriff after we egged his car from roof of SOS TV among other targets. They could never figure out how we got up and down so quickly. Getting up we used truck fan belts looped to telephone pole

Re: [AFMUG] Zoo Charity Repelling Event

2015-09-24 Thread Chuck McCown
I was hiding in the back of a pickup cruising main street one evening. A cop was passing by in the opposite direction. One of my buddies grabbed a big bunch of hay from the bed of the truck and heaved it onto the cops windshield. It had a beer bottle in it and it cracked the cops

[AFMUG] Bee glad you don't live in this town :-/

2015-09-24 Thread Sean Heskett
http://news.yahoo.com/massive-bee-swarm-descends-arizona-neighborhood-four-hospitalized-195038744.html

[AFMUG] Zoo Charity Repelling Event

2015-09-24 Thread Jaime Solorza
Our zoo is sponsoring a repelling event for charity off a 12 story downtown building. I was talking to my brother about doing it when wife overheard. Guess I am not repelling off a historic building. Glad I have two ears as one is shot.

Re: [AFMUG] Tower Dish Mount

2015-09-24 Thread Chuck McCown
We can make them bigger. The tower face mount is 26-26 which means 26 inches wide and the tube is 26 inches long. We can easily expand that. -Original Message- From: Matt Sent: Thursday, September 24, 2015 4:53 PM To: af@afmug.com Subject: [AFMUG] Tower Dish Mount Have a 3 foot

Re: [AFMUG] Fulton County, GA discovers new and amazing 3000+km MW path

2015-09-24 Thread Chuck McCown
Lots of licenses were guessed at from topo map coordinates. I know, I was the guesser for many years. -Original Message- From: Eric Kuhnke Sent: Thursday, September 24, 2015 5:18 PM To: af Subject: Re: [AFMUG] Fulton County, GA discovers new and amazing 3000+km MW path I have

[AFMUG] The FCC cometh and goeth

2015-09-24 Thread Jaime Solorza
They found source of 119.5MHz interference! Two FM stations at 94.7 and 99.9Mhz were the ones. Trying to get the scoop. Their STLs are Mosely and Harris but in the 941MHz to 950MHz range.I think these stations are on same tower and communications room.

Re: [AFMUG] Fulton County, GA discovers new and amazing 3000+km MW path

2015-09-24 Thread Eric Kuhnke
I have recently been using aerial photography to correlate ULS-listed lat/long of some part 101 things where they really are. I have found a lot of glaring errors where the z/y coodinates are off by 50 meters or more, on new links. Nowadays this is in my opinion inexcusable, a $300 smartphone on

Re: [AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread Chuck McCown
Under penalty of perjury no less... From: Ken Hohhof Sent: Thursday, September 24, 2015 2:59 PM To: af@afmug.com Subject: Re: [AFMUG] The first candidate to come out against Net Neutrality I really wish he had left my company out of it. And the regulatory burden on a small ISP has nothing to

Re: [AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread Rory Conaway
Yea, I’ve been there. The real problem starts with the idea that the FCC should be collecting all this data and getting in between a company and it’s customers. What possible reason do they have even to get in the middle of it other than control and to justify the existence of these

Re: [AFMUG] Zoo Charity Repelling Event

2015-09-24 Thread Sam Lambie
It's Ironic that you hang off of towers for a living but your wife won't let you safely rappel down a building. Unless you had a plan to repel the building and that might be painful... On Thu, Sep 24, 2015 at 4:02 PM, Jaime Solorza wrote: > Our zoo is sponsoring a

Re: [AFMUG] Zoo Charity Repelling Event

2015-09-24 Thread Jaime Solorza
Yep. She still upset I even considered. On Sep 24, 2015 4:33 PM, "Sam Lambie" wrote: > It's Ironic that you hang off of towers for a living but your wife won't > let you safely rappel down a building. Unless you had a plan to repel the > building and that might be

Re: [AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread Chuck McCown
The nail the sticks up gets hammered down. From: James Howard Sent: Thursday, September 24, 2015 3:10 PM To: af@afmug.com Subject: Re: [AFMUG] The first candidate to come out against Net Neutrality Stick your head up, get it kicked off! From: Af [mailto:af-boun...@afmug.com] On Behalf Of

Re: [AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread Chuck McCown
You guys need to focus your efforts on getting a piece of the pie. USF and CAF and other pork is out there. It should be portable to the service provider. Don’t kick against socialism when it benefits your pocketbook. From: Rory Conaway Sent: Thursday, September 24, 2015 3:27 PM To:

[AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread Rory Conaway
To be fair, he lists a lot of regulations but at least Net Neutrality is getting some attention. "The Federal Communications Commission's Net Neutrality rule classifies all Internet Service Providers (ISPs) as "public utilities," subjecting them to antiquated "common carrier" regulation.

[AFMUG] Tower Dish Mount

2015-09-24 Thread Matt
Have a 3 foot 11ghz dish. http://www.mccowntech.com/tower-face-mount/ Anyone know of something similar to this but will work on a tower with a face of about 40 inches?

Re: [AFMUG] Fulton County, GA discovers new and amazing 3000+km MW path

2015-09-24 Thread Matt Hardy
I live in Fulton County! Lots of magical things happen here ;) On Thu, Sep 24, 2015 at 1:15 AM, Eric Kuhnke wrote: > From the FCC ULS... > > Nice path, I guess? > > Attached image. >

Re: [AFMUG] Tower Dish Mount

2015-09-24 Thread Adam Moffett
Galvanized unistrut + u-bolts. I have a dumb question though. This tower with a 40" face must have some beefy legs. Why not put the dish on a standoff on the leg? Have a 3 foot 11ghz dish. http://www.mccowntech.com/tower-face-mount/ Anyone know of something similar to this but will work

Re: [AFMUG] Tower Dish Mount

2015-09-24 Thread Rory Conaway
Wow, $25 at Home Depot. Nice markup. Rory -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett Sent: Thursday, September 24, 2015 5:46 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Dish Mount Galvanized unistrut + u-bolts. I have a dumb question though.

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Rhys Cuff (Latrobe I.T)
I find you need WDS enabled -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tim Reichhart Sent: Friday, 25 September 2015 12:32 PM To: af@afmug.com Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing I am having an weird issues with my PowerBeam 5AC 500 with

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Peter Kranz
Links by default now run under WDS.. So they removed the ability to disable it. -PK From: Af [mailto:af-boun...@afmug.com] On Behalf Of That One Guy /sarcasm Sent: Thursday, September 24, 2015 9:27 PM To: af@afmug.com Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing I'm

Re: [AFMUG] water tank mounting

2015-09-24 Thread Mark Radabaugh
Huh - that’s awesome. I have a tank like that I have been trying to figure out a better mount for. Never thought of using unistrut vertical on the rails. Look in the unistrut catalog and you should find enough parts to build something close. I’m thinking two struts vertical with beam

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread George Skorup
Does this new 11ac stuff have multicast filtering like the M series? I think it's on the advanced tab. I made that mistake once. On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote: I find you need WDS enabled -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tim

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Tim Reichhart
See there isnt no option for WDS in 7.1.4 me and justin wilson looked and ubnt did away from this on 7.x firmware. -Original Message- > From: "Rhys Cuff (Latrobe I.T)" > To: af@afmug.com > Date: 09/24/15 10:45 PM > Subject: Re: [AFMUG] ospf issues with

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Tim Reichhart
Peter if it drops how do I fix that issue? Tim -Original Message- > From: "Peter Kranz" > To: af@afmug.com > Date: 09/24/15 11:00 PM > Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing > > This should be relatively easy to diagnose using onboard

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Peter Kranz
Well first found out where they are dropping.. First thing to try is to ensure you do not have multicast filtering enabled. -PK

[AFMUG] OT Cage match - who wins

2015-09-24 Thread Chuck McCown
Music instructor from Whiplash or drill instructor from Full Metal Jacket?

[AFMUG] OT Maynard Ferguson

2015-09-24 Thread Chuck McCown
Paul McCall, can you do this? https://www.youtube.com/watch?v=hvW9PVhUsfE

[AFMUG] Any idea what technology Windsteam is using for 100Mbps wireless?

2015-09-24 Thread Rory Conaway
http://www.cedmagazine.com/news/2015/09/windstream-opens-100-mbps-broadband-250-new-markets Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net www.triadwireless.net "There

Re: [AFMUG] Any idea what technology Windsteam is using for 100Mbps wireless?

2015-09-24 Thread Darin Steffl
It's not wireless. It is VDSL2 and pair bonding last time I checked on it. On Fri, Sep 25, 2015 at 12:13 AM, Rory Conaway wrote: > > http://www.cedmagazine.com/news/2015/09/windstream-opens-100-mbps-broadband-250-new-markets > > > > *Rory Conaway **• Triad Wireless •**

Re: [AFMUG] OT Cage match - who wins

2015-09-24 Thread Rory Conaway
He makes a pretty good therapist too. https://www.youtube.com/watch?v=XfmVBmDKLZI -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jay Weekley Sent: Thursday, September 24, 2015 9:12 PM To: af@afmug.com Subject: Re: [AFMUG] OT Cage match - who wins R. Lee Ermy for

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Peter Kranz
This should be relatively easy to diagnose using onboard tcpdump to determine where the OSPF hello packets are being dropped. -PK

Re: [AFMUG] OT Cage match - who wins

2015-09-24 Thread George Skorup
Well, Gunny got shot with an M14 in the shitter by the guy he turned into a nutbag who then put the muzzle in his own mouth and pulled the trigger, so not so much winning on his part. On 9/24/2015 10:44 PM, Chuck McCown wrote: Music instructor from Whiplash or drill instructor from Full

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Mathew Howard
I thought they were just always supposed to be transparent bridges, so wds isn't needed. I do have OSPF working over several PowerBeam AC links, and I didn't do anything special to make it work. On Thu, Sep 24, 2015 at 11:27 PM, That One Guy /sarcasm < thatoneguyst...@gmail.com> wrote: > I'm

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread That One Guy /sarcasm
that makes sense On Thu, Sep 24, 2015 at 11:38 PM, Peter Kranz wrote: > Links by default now run under WDS.. So they removed the ability to > disable it. > > > > -PK > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *That One Guy > /sarcasm > *Sent:*

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Tim Reichhart
so if the multicast filtering can cause ospf not to work correctly? Even there is no option for wds on the newer firmware? Tim -Original Message- > From: "George Skorup" > To: af@afmug.com > Date: 09/24/15 10:53 PM > Subject: Re: [AFMUG] ospf issues with

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread George Skorup
I don't have any of the ac radios, only M. Does it have Multicast Data - Allow All (check box)? If that's unchecked, then multicast will not be allowed over the RF interface, thus OSPF (which is multicast) will not work. Other than that, are you sure you have MT OSPF configured correctly? If

Re: [AFMUG] OT Cage match - who wins

2015-09-24 Thread Jay Weekley
R. Lee Ermy for sure. Chuck McCown wrote: Music instructor from Whiplash or drill instructor from Full Metal Jacket?

Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread That One Guy /sarcasm
I'm poking at eoip tunnels with ospf inside why did they remove wds? On Thu, Sep 24, 2015 at 10:11 PM, George Skorup wrote: > I don't have any of the ac radios, only M. Does it have Multicast Data - > Allow All (check box)? If that's unchecked, then multicast will not be >

Re: [AFMUG] The first candidate to come out against Net Neutrality

2015-09-24 Thread James Howard
Stick your head up, get it kicked off! From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Thursday, September 24, 2015 4:03 PM To: af@afmug.com Subject: Re: [AFMUG] The first candidate to come out against Net Neutrality Under penalty of perjury no less... From: Ken

[AFMUG] ospf issues with pbe-5ac-500 not passing

2015-09-24 Thread Tim Reichhart
I am having an weird issues with my PowerBeam 5AC 500 with ospf traffic not passing through and I am using these PowerBeam 5AC 500 as backhauls and they are connected to mikrotik. I am running firmware 7.1.4xc and not doing nbma setup. Tim

Re: [AFMUG] OT Hmmmm

2015-09-24 Thread Rory Conaway
[https://scontent.fphx1-2.fna.fbcdn.net/hphotos-xap1/v/t1.0-9/12019864_874697122644538_6784544746706594259_n.jpg?oh=8ea608065c9421bc0243573350f0a705=56AB8171] From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sean Heskett Sent: Wednesday, September 23, 2015 9:09 AM To: af@afmug.com Subject: Re: