There's 8-port non-gigabit/transformer-based PoE injectors on eBay, you can use
one of those as a PoE extractor from all the lines. But there is the risk that
as they are all connected, the same PoE is going back to customers and could
damage any hardware connected to their outlets that is not g
?
-Original Message-
From: Jason McKemie
Sender: "Af"
Date: Mon, 16 Feb 2015 09:17:22
To: af@afmug.com
Reply-To: af@afmug.com
Subject: Re: [AFMUG] Sm needs to be power cycled after interference? 12.1
On Monday, February 16, 2015, Jason McKemie <
j.mcke...@veloxinetbroadband.com> wrote:
In my limited experience taking apart antennas, most dual-polarized non-dish
antennas use an array of patches fed at perpendicular angles to save space,
which I believe have limitations in beamwidth going much past 90/120 deg. It's
very visible in dual slant omnis which are often 4 arrays of ~90
Oh snap
-Original Message-
From: Kurt Fankhauser
Sender: "Af"
Date: Fri, 20 Feb 2015 14:10:43
To: af@afmug.com
Reply-To: af@afmug.com
Subject: [AFMUG] FS: Trango Altum AC backhauls
I have for sale 2 Trango radios of model A600-25. For a complete link.
Radios are brand new only tested o
A 750mbps link on a (supposedly good) TDMA protocol at $300 is an incredible
bargain and extremely competitive offer, even though it's a wifi chipset (I
know we couldn't ask for an FPGA at this price).
But has anyone actually managed to buy any MIMOSA products? How many unicorns
were included
This is art.
-Original Message-
From: "Chuck McCown"
Sender: "Af"
Date: Sat, 14 Mar 2015 06:12:12
To:
Reply-To: af@afmug.com
Subject: [AFMUG] My wife gets the credit
-Original Message- From: Nate Burke Sent: Wednesday, February 06, 2013
2:24 PM To: af@afmug.com Subject: [AFM
What? Start using? Orthogon radios have had SFP options for near 10 years, and
most higher-end/licensed radios have them too.
-Original Message-
From: Josh Luthman
Sender: "Af"
Date: Fri, 3 Apr 2015 21:17:45
To: af@afmug.com
Reply-To: af@afmug.com
Subject: Re: [AFMUG] System Uptime
I
What do you mean by not optimize? 10/25mbps per CPE is fine if they're being
used for single/quad-camera uplinks (of a few mbps each) to a central AP.
I remember being in NYC and peering at the extensive camera deployment using a
huge number of wireless links, most of those radios looked like Pr
You see, due to the dishes' construction, their poops are notably large and
metallically stiff, which accentuates the irresponsibility of the whole affair.
-Original Message-
From: Jason McKemie
Sender: "Af"
Date: Fri, 8 May 2015 02:15:42
To: af@afmug.com
Reply-To: af@afmug.com
Subject
You did account for the fact that Ubnt antenna gain specs usually add an extra
2-3db "in taxes" right?.
-Original Message-
From: "Glen Waldrop"
Sender: "Af"
Date: Fri, 8 May 2015 01:59:02
To:
Reply-To: af@afmug.com
Subject: Re: [AFMUG] Nanobridge M5
Thanks.
Accounting for 3dB "gain"
As long as it's not gigabit yes, as the 100mbit models have Canopy-standard
power.
-Original Message-
From: joseph marsh
Sender: "Af"
Date: Sat, 13 Jun 2015 19:56:54
To:
Reply-To: af@afmug.com
Subject: [AFMUG] Old canopy surge protector
Will a 600ss surge protector work on a epmp cor
Have high installation standards - good signal level, well-attached mounts and
cabling, everything high is grounded, and don't use
temporary/weird/hard-to-access wood poles or popups. No exceptions to those
since almost every one will bite you in the butt later, some of our competitors
and supe
Oh and if a customer is a huge PITA or doesn't want to pay, the answer is not
to keep trying to please them, it's "sorry we couldn't please you, here's a
refund for the install (if they're not in arrears) and the phone number of our
(least liked) competitor".
-Original Message-
From: Tr
Shielded cable is for protection against high-power RF interference, it does
not correctly protect from ESD as it leads inside the house. The grounding on
your tripod or mast is the protection from ESD and keeps surges outside the
house.
-Original Message-
From: Jeremy
Sender: "Af"
D
Ring ring ring ring Obamaphone
-Original Message-
From: Rory Conaway
Sender: "Af"
Date: Tue, 27 Jan 2015 20:21:15
To: af@afmug.com
Reply-To: af@afmug.com
Subject: [AFMUG] And this is the agency that wants to tax and regulate us
http://denver.cbslocal.com/2015/01/26/phone-company-outrag
You can offer it right now in 2.4, 3.65 or 5.8, the customers just need to pay
the money for it and to cut trees and/or buy a big tower. A few people are, the
hard part is finding them...
-Original Message-
From: "CBB - Jay Fuller"
Sender: "Af"
Date: Sat, 31 Jan 2015 18:17:46
To:
Rep
That's a quite high percentage of failures. Why? Trees and those customers
didn't want to pay you to put up a residential tower?
-Original Message-
From: "CBB - Jay Fuller"
Sender: "Af"
Date: Sat, 31 Jan 2015 18:45:56
To:
Reply-To: af@afmug.com
Subject: Re: [AFMUG] 25Mbps
and this i
A number of our customers in trees are willing to spend a few hundred to put up
a 30-40ft tower to get above the trees, but those who need a 68ft tower are
rarely interested in paying a few $K for new.
-Original Message-
From: Bill Prince
Sender: "Af"
Date: Sat, 31 Jan 2015 18:46:59
T
So you disagree when your own high number of rejections show you should be
doing it?
The advantage is that it's the customer paying for the height that they need to
get service, not you (mostly).
-Original Message-
From: "CBB - Jay Fuller"
Sender: "Af"
Date: Sat, 31 Jan 2015 19:52:42
I'm guessing AF5 chipset with the same 2-antenna support, some kind of
self-feedback test to force correct setup / antenna choices, and up to 80mhz
channels at 1024QAM... Allowing 2gbps (1gbps FD) in 5.4ghz where there is
spectrum, or 1.4gbps in 5.8. Put it on 6ft dishes and you have one impress
Depending how real-time Mimosa's SA is, Orthogon PTP400 had a kind of those 10
years before...
-Original Message-
From: Mike Hammett
Sender: "Af"
Date: Tue, 3 Feb 2015 23:49:44
To:
Reply-To: af@afmug.com
Subject: Re: [AFMUG] Introducing airFiber X
I think Mimosa announced that first.
I've seen lots of the stainless steel nuts on the PMP320 CPEs seize after a few
years until we've started automatically replacing them on new units. Not great
to have a factory issue like that but I've heard people say that Gemtek hasn't
responded/cared.
-Original Message-
From: "Ken Ho
How much do you think they make per Canopy PSU after the stockkeeping / freight
/organizational work? $3 ? I'm sure losing those sales won't keep them up at
night.
-Original Message-
From: TJ Trout
Sender: "Af"
Date: Fri, 26 Jun 2015 00:12:22
To:
Reply-To: af@afmug.com
Subject: Re: [
From what I understand FSK Canopy doesn't estimate incoming signal level, more
that it adjusts the rx pre-amp until it sees a signal it likes and then based
on rx pre-amp setting it guesses what the incoming signal was. So 2 different
Canopy units can in the exact same situation and signal can s
If you're ready to wait a few months (hopefully not longer) until the 900mhz
450 comes out I think you'll get many more buyers then.
-Original Message-
From: Adam Moffett
Sender: "Af"
Date: Fri, 3 Jul 2015 22:16:12
To:
Reply-To: af@afmug.com
Subject: Re: [AFMUG] FS: Adjustable 900mhz
A 2-3TB HD should be all you need for over 30 days of storage with motion-based
recording... Put the triggers to be sensitive, there is no reason to be
recording when absolutely nothing changes on screen.
--Original Message--
From: Nate Burke
Sender: Af
To: Animal Farm
ReplyTo: af@afmug.
I can't recall last time I saw a switch that didn't gracefully mix 100 and
1000mbit - what are the symptoms? What did Ubiquiti tech support say?
--Original Message--
From: Brett A Mansfield
Sender: Af
To: af@afmug.com
ReplyTo: af@afmug.com
Subject: [AFMUG] ToughSwitch 8 PRO
Sent: Aug 7, 2
So it only took a minute, assuming time zones are 7h apart.
-Original Message-
From: CBB - Jay Fuller via Af
Sender: "Af"
Date: Tue, 16 Sep 2014 05:36:05
To: Animal Farm
Reply-To: CBB - Jay Fuller ,
Animal Farm
Subject: Re: [AFMUG] 200Mbps unlicensed solution for 5 mile link
Thank you Paul, PDMNet and tech for your work and dedication.
--Original Message--
From: Paul McCall via Af
Sender: Af
To: af@afmug.com
ReplyTo: Paul McCall
ReplyTo: Animal Farm
Subject: [AFMUG] LIST: Overnight adjustments
Sent: Sep 16, 2014 7:43 AM
Guys,
We installed some updates in the
Most of us have been here so long we don't remember how.
--Original Message--
From: Rick Kunze via Af
Sender: Af
To: Animal Farm
ReplyTo: Rick Kunze
ReplyTo: Animal Farm
Subject: [AFMUG] AFMUG web site???
Sent: Sep 16, 2014 11:14 AM
There is no AFMUG web site?
How do people subscribe to
Proxim is heavy in the video surveillance market. Price/performace doesn't
matter as much when you're selling to integrators whose experience isn't on the
wireless side and who only know your name.
-Original Message-
From: Bill Prince via Af
Sender: "Af"
Date: Wed, 17 Sep 2014 18:21:2
Does anyone have resources/FAQs/etc to understand Waveguide compatibility?
y
smaller than rectangular waveguide. Circular is good for dual pol and is
exceedingly low loss but extra care has to be taken to prevent polarization
rotation.
-Original Message----- From: cstanners--- via Af
Sent: Saturday, September 20, 2014 6:41 PM
To: Jason McKemie via Af
Subje
This is scary, I hope they're just reorganizing, not really closed - not good
to lose competition. Their licensed radios looked really good, and the
unlicensed, while quite 'dumb' RF-wise, were solidly built.
-Original Message-
From: Eric Kuhnke via Af
Sender: "Af"
Date: Tue, 23 Sep 20
IIRC newer windows versions will not route to a 169.254 IP that is outside your
local network - if I need to access a SM on that IP that is behind a router, I
need to do as administrator "route add 169.254.1.0 mask 255.255.255.0
put.routers.ip.here"
--Original Message--
From: Bill Princ
IIRC AP in 5.8 is limited to 19dbm since they believe you always have a 17dbi
gain antenna and 36dbm is max?
--Original Message--
From: Bill Prince via Af
Sender: Af
To: Motorola III
ReplyTo: af@afmug.com
Subject: [AFMUG] PTP450 maximum xmit power?
Sent: Oct 9, 2014 5:56 PM
We have some
I'm at a residential customer install and I may have bitten off more than I can
chew - I agreed to attempt to install on their garage and pull wire to their
house through a pipe (since they have a metal roof the only other place I can
install is on the front of their house - ugly).
It's taking
It's interesting that we needed Ubiquiti to push forward the industry by
creating a high-end/high-capacity backhaul at a very low price, and Cambium to
do the same by creating a wifi-chip-based/value-priced PtMP and mid-capacity
PtP system that has GPS sync and seems to work very well.
A few ye
Shielded cat5 should not have any effect on lightning losses - the induced
currents would go down the ground wire of whatever bigger structure gets
affected before going down the shield of the cat5.
--Original Message--
From: Matt via Af
Sender: Af
To: af@afmug.com
ReplyTo: af@afmug.com
My blackberry doesn't support it, but will the site automatically attempt to
get your location via the browers's location feature (either uses gps or nearby
wifi networks)?
-Original Message-
From: timothy steele via Af
Sender: "Af"
Date: Tue, 28 Oct 2014 01:50:47
To: af@afmug.com
Rep
I don't see why anyone would do this, if water gets into your RJ45, something
has failed and needs to be replaced.
-Original Message-
From: "Jerry Richardson \(airCloud\) via Af"
Sender: "Af"
Date: Tue, 28 Oct 2014 19:17:11
To: af@afmug.com
Reply-To: af@afmug.com
Subject: [AFMUG] Diele
I had stayed at the HoJo, was cheap and a quick ride / reasonable walk to AF
park.
--Original Message--
From: Nate Burke via Af
Sender: Af
To: Animal Farm
ReplyTo: af@afmug.com
Subject: [AFMUG] AF Lodging
Sent: Dec 8, 2014 5:30 PM
On the AF website, it says to use the Hoiday-inn-express
I use those jokes at the office whenever anything breaks and it somehow never
gets old.
-Original Message-
From: Sean Heskett via Af
Sender: "Af"
Date: Fri, 19 Dec 2014 00:11:37
To: af@afmug.com
Reply-To: af@afmug.com
Subject: Re: [AFMUG] MT reboot
I'd try calling your ISP ;-)
On T
Does the DVR do automatic uPNP port forwarding? May be triggering a MT bug?
--Original Message--
From: Travis Johnson via Af
Sender: Af
To: af@afmug.com
ReplyTo: af@afmug.com
Subject: [AFMUG] MT reboot
Sent: Dec 18, 2014 4:11 PM
Hi,
We are having a strange issue with a Mikrotik x86 based
Ok, so unless your tx power at the tower is set low or there's a problem in the
signal chain, it's likely a LOS issue.
What does RM say for estimated signal there (assuming you have correct tree
height / density settings in the program)?
-Original Message-
From: Alan West via Af
Sender
Please paste the screenshot... Just that part of the window please.
Are you certain that you have the right gateway?
-Original Message-
From: joseph marsh via Af
Sender: "Af"
Date: Sat, 27 Dec 2014 00:44:25
To:
Reply-To: af@afmug.com
Subject: Re: [AFMUG] Mikrotik
Yea i did wasn't thi
46 matches
Mail list logo