greg gulrajani wrote:
> >No. I think I'll be able to remove the bugs from the loader, but,
> >currently, I don't have time for this.
> >
> I would be happy to try fixing the loader is you could supply me with a
> couple of details.
The first (and only) documentation for this is the "Device Firmwar
Ok, I finally got this sorted out. I had Dell's OEM card, which turns
out to be substantially different from the retail version (despite
being advertised as a SBLive, and manufactured by Creative). It handles
DSP via software (GR!!!), and according to Dell will only work (on
Windows, of cours
My kernel has ALSA 0.9.4. I have compiled the libs, utils and tools
from cvs HEAD, today (alsa 0.9.4 code).
I get only vaguely audible sound using aplay or a program sending output
to the OSS emulation.
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left
Ok, so 2.4.20 doesnt compile with gcc 3.3 or something, and thats whats
in debian sarge right now. So i needed to use a newer kernel, so
2.4.21-rc it is
I previously had alsa 0.9.0 rc 4, then rc 7 installed on 2.4.20. I got
my shiny new kernel working and installed the 0.9.4 drivers (as modul
On Thu, 5 Jun 2003, Takashi Iwai wrote:
> At Wed, 4 Jun 2003 11:48:40 -0700 (PDT),
> Dan Hollis wrote:
> > Is it possible to capture program's output (eg realplayer) with arecord
> > on trident or ymfpci?
> several possibilities:
> - no perfect quality but easy: choose "Mix" as the capture source
At Thu, 5 Jun 2003 13:18:20 +0200 (CEST),
Julien Claassen wrote:
>
> Hi Takashi!
> I compiled my alsa with gcc3.2, I have 0.9.2 running. With the midi-device
> of my 1010lt everythings fine and I can properly start alsamixer and edit all
> items. That's really great btw, though confusing. But I'
At Wed, 4 Jun 2003 11:48:40 -0700 (PDT),
Dan Hollis wrote:
>
> Is it possible to capture program's output (eg realplayer) with arecord
> on trident or ymfpci?
several possibilities:
- no perfect quality but easy: choose "Mix" as the capture source
and capture normally. supported the cards w
Hi Takashi!
I compiled my alsa with gcc3.2, I have 0.9.2 running. With the midi-device
of my 1010lt everythings fine and I can properly start alsamixer and edit all
items. That's really great btw, though confusing. But I've got an
/etc/asound.state from a working system. The owner of that one eve
Hello Clemens,
No. I think I'll be able to remove the bugs from the loader, but,
currently, I don't have time for this.
I would be happy to try fixing the loader is you could supply me with a
couple of details.
What loader should i use ? i checked the latest alsa release 0.9.4 for
the progra
Hi,
You need encoder for Dolby Digital.
Peter Zubaj
== REKLAMA =
Vyrazne zlavy pocitacov a prislusenstva
Sun Fire V210 server v cenach uz od 125.000,- Sk bez DPH
Navstivte nas na adrese http://www.somi.sk/sun/lowend_servery.php
===
At Wed, 4 Jun 2003 13:05:07 -0700 (PDT),
Dave wrote:
>
> On Wed, 4 Jun 2003, Takashi Iwai wrote:
>
> > At Tue, 3 Jun 2003 22:01:54 -0700 (PDT),
> > Dave wrote:
> <<>>
> > > kernel: ALSA ../../alsa-kernel/isa/ad1848/ad1848.c:80: specify port
> > > kernel: AD1848 soundcard not found or device busy
I'm still trying to get ALSA working with the onboard sound on
my ASUS A7V8X-X MB. The lspci command shows the audio controller as
being a VT8233 AC97 Audio Controller. I'm using RedHat9 but with kernel
2.4.21-rc5. I am also using ALSA 0.9.4. The driver builds OK and the
only indication I g
Hello,
I've been trying in vain to get 5.1 digital output from my SBLive card,
using ALSA 0.9.4 and aplay. I'm a bit stumped because I don't know if
it's a hardware limitation, software bug, or, most likely, a user issue.
I've created a six-channel wave file that I can play just fine with
$ aplay
This is a multi-part message in MIME format.
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.
This is a multi-part message in MIME format.
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.
Pete Bessman wrote:
> [EMAIL PROTECTED]:~$ arecord -D hw:0,0 test.wav
> Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
> arecord: set_params:805: Sample format non available
>
> I have tried every sample rate conceivable, to no avail. For some
> reason, the above command worked ONC
On Tue, 2003-06-03 at 11:06, Moshe Yudkowsky wrote:
> After going to 0.9.3c for alsa-base, I suddenly discovered that several
> programs stoped working properly. In particular, "xine," which used to
> work well with ALSA, gives a slew of error codes:
0.9.3c removed /proc/asound/dev
In many case
Is it possible to capture program's output (eg realplayer) with arecord
on trident or ymfpci?
-Dan
--
[-] Omae no subete no kichi wa ore no mono da. [-]
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debu
At 14:12 2003-06-04 -0700, Don Raikes wrote:
Moshe,
I re-ran the configure in the driver directory.
The exact command I gave was:
./configure --with-cards=all --with-debug=full --with-oss=yes --with-seq=yes
--with-kernel=/usr/src/linux-2.4.9-e.12
Don,
I confess that I don't have a solution -- pe
Hi all,
I have reported this problem before, but I decided to start from scratch and
re-install my RHAS2.1 and apply all patches.
I then tried to install the alsa-0.9.4 drivers, lib, and utils.
When configuring the driver, I used:
--with-cards=all --with-oss=yes --with-seq=yes
the configuration
the problem with ice1712 is that it has nothing like the "main volume" control
as found on "normal consumer cards".
You're limited to use envy24control or alsamixer, sucks but true :(
/Thomas
>-- Original Message --
>From: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Cc: [EMAIL PROTECTED]
>Subject:
At 13:04 2003-06-04 -0700, Don Raikes wrote:
Hi all,
I have reported this problem before, but I decided to start from scratch and
re-install my RHAS2.1 and apply all patches.
I then tried to install the alsa-0.9.4 drivers, lib, and utils.
When configuring the driver, I used:
--with-cards=all --wi
At Tue, 3 Jun 2003 22:01:54 -0700 (PDT),
Dave wrote:
>
>
> Hi, I'm tring to get alsa working, but I'm a bit of a hardware dummy :D
>
> OSS worked sometime ago on this HPVectra. The search page doesnt work and
> I dont see a listing for AZT1008. There is a line in modules.conf for
> ad1848 and a
They are not cooperating. Period. I have spent _hours_ trying to get
alsarecord to work, and all I get is:
[EMAIL PROTECTED]:~$ arecord -D hw:0,0 test.wav
Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
arecord: set_params:805: Sample format non available
I have tried every sampl
On Wed, 4 Jun 2003, Dave wrote:
> On Wed, 4 Jun 2003, Takashi Iwai wrote:
>
> > At Tue, 3 Jun 2003 22:01:54 -0700 (PDT),
> > Dave wrote:
> <<>>
> > > kernel: ALSA ../../alsa-kernel/isa/ad1848/ad1848.c:80: specify port
> > > kernel: AD1848 soundcard not found or device busy
> > >
> > > Should I
I have:
Mandrake 9.0 with updates thru 06-01-03
KDE 3.0.5a with updates thru 06-01-03
I am trying to get full duplex working and to do that I assume I need to
recompile ALSA.
I want to use speakfreely in FULL DUPLEX mode. It appears that Mandrake is
defaulted to half duplex. Are there changes to
I'm attempting to configure ALSA on a new system with a SBLive card.
The old box (dead with a fried motherboard) also had a SBLive, so I
basically just copied the configuration files over. At this point I'm
not getting any error or warning messages, and ALSA appears to load
with no problems whats
On Wed, 4 Jun 2003, Takashi Iwai wrote:
> At Tue, 3 Jun 2003 22:01:54 -0700 (PDT),
> Dave wrote:
<<>>
> > kernel: ALSA ../../alsa-kernel/isa/ad1848/ad1848.c:80: specify port
> > kernel: AD1848 soundcard not found or device busy
> >
> > Should I try another driver?
> try alsaconf script in als
On Saturday 31 May 2003 16:04, Edwin Boersma wrote:
I managed to get my output back, after trying several combinations of
settings. I don't really know what I did actually...
Who can tell me how I can have CD output and XMMS output at the same time on
different channels? The nformation from Midi
At Sat, 31 May 2003 02:52:31 -0700 (PDT),
Giorgio Weston wrote:
>
> Still no luck.
> It always fails at the same point also with 0.9.3c
ACPI problem?
try the different IRQ routing with kernel boot parameter.
Takashi
---
This SF.net email is
Moshe,
I re-ran the configure in the driver directory.
The exact command I gave was:
./configure --with-cards=all --with-debug=full --with-oss=yes --with-seq=yes
--with-kernel=/usr/src/linux-2.4.9-e.12
The results are as follows:
checking for gcc... gcc
checking for C compiler default
>>
>>At Wed, 4 Jun 2003 16:14:44 +,
>Thomas Eriksson wrote:
>>
>> the problem with ice1712 is that it has nothing like the "main volume"
control
>> as found on "normal consumer cards".
>>
>> You're limited to use envy24control or alsamixer, sucks but
>>rue :(
>
>you can remap the OSS volume to
At Wed, 4 Jun 2003 16:14:44 +,
Thomas Eriksson wrote:
>
> the problem with ice1712 is that it has nothing like the "main volume" control
> as found on "normal consumer cards".
>
> You're limited to use envy24control or alsamixer, sucks but true :(
you can remap the OSS volume to arbitrary AL
At Sat, 24 May 2003 01:07:33 +0200 (CEST),
Julien Claassen wrote:
>
> Hi All!
> Now I treid to play a soundfile through my 1010lt. I did:
> aplay -D plughw:1(,0) file.wav
> I tried both with and without ,0 and both times my system just crashed. I
> had to push the reset button, for my keyboa
Edwin Boersma wrote:
On Saturday 31 May 2003 16:04, Edwin Boersma wrote:
I managed to get my output back, after trying several combinations of
settings. I don't really know what I did actually...
Who can tell me how I can have CD output and XMMS output at the same time on
different channels? Th
At Tue, 27 May 2003 08:33:48 CEST,
[EMAIL PROTECTED] wrote:
>
> Hi all !
>
> I'm using a dell inspiron 8200 with mandrake 9.1 (kernel 2.4.21-pre something), ACPI
> (20030122) and dynamic speedstep enabled and controled by autospeedstep-0.2. I have
> installed the alsa driver 0.9.3c for my sound
This is my second thread regarding the trouble i get in my machine when
loading alsa-0.9.3a modules.
All seems to be correctly loaded (including OSS/Free emulation), the
alsamixer is unmuted...However i didn't succeed to get sound working in
applications that use OSS driver.
Even, after typing ma
greg gulrajani wrote:
> I bought a M-Audio Sonica USB soundcard and I have been trying to get
> it working w/ the alsa drivers with no luck.
>
> I have found this post related to the the M-Audio sonica/alsa drivers on
> geocrawler http://www.geocrawler.com/mail/msg.php3?msg_id=9441828&list=12349
>
38 matches
Mail list logo
