Of course, each to his own choice.
I decided on the K3/10 (10w version of the K3), with subreceiver and
transverter interface (and a few other goodies) ...total $3000
Add a new DEMI 144/28 xvtr $500, and later a DEMI 432/28 xvtr kit
$400. These are the new design to be released in early June.
I
Saw all the Flex goodies at the DX Convention here in Visalia today. Dunno, I
still like to twist knobs, but it is quite a system they have...
John W6ZKH
From: Michael Tondee
To: amsat-bb@amsat.org
Sent: Fri, April 16, 2010 6:25:45 PM
Subject: [amsat-bb] R
Has anyone located a driver for the LVB Tracker internal USB to serial
port adapter on Windows 7 x64?
If not, has anyone reverted to the serial port connection on LVB Tracker
and used an external USB to serial port adapter successfully with
SatPC32 on Windows 7 x64?
I have an Edgeport multiple
- Original Message -
From: "Rick - WA4NVM"
To: "Luc Leblanc" ;
Sent: Saturday, April 17, 2010 3:37 AM
Subject: [amsat-bb] Re: Arecibo
>
> Luc and All,
>
> I was able to copy the CW signal "fair" at times (when my local pulse
> noise was down) today around 1840 utc with just a Cushcraft 43
But what about antennas like the M2 ants where it's a balanced feed, and
there is no + side of the element or coax?
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 4/16/2010 9:37 PM, i8cvs wrote:
> - Original Message -
> From: "Edward Cole"
> To: "Rick
- Original Message -
From: "Edward Cole"
To: "Rick - WA4NVM" ; "i8cvs" ;
"Douglas Quagliana" ; "amsat"
Sent: Friday, April 16, 2010 8:20 PM
Subject: Re: [amsat-bb] Re: Arecibo and circular polarization using cheap
yagis
My M2 436CP42 looks just like Dom's drawing but
it has a 1/2 wavelen
Again if price is no object, you should be able to do it with a K3 from
Elecraft (using the sub receive and their transverters).
73,
Joe kk0sd
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Michael Tondee
Sent: Friday, April 16, 2010 8
Luc and All,
I was able to copy the CW signal "fair" at times (when my local pulse noise
was down) today around 1840 utc with just a Cushcraft 432-20T
(my 1970's antenna) using a SSB 7000 and a TS-2000x with both preamps on. I
was talking to a local EME operator on 220mhz (WD4JHD)
and would te
The Kenwood TS-2000 and 2000X are still out there. They have an annoying
birdie right smack dab on the downlink of SO-50 and AO-27 but both of
those are FM sats. You can work around the birdie with a preamp but the
pass time is shortened a bit because you are waiting for the receive
frequency
On 16 Apr 2010 at 19:43, Bob- W7LRD wrote:
Date sent: Fri, 16 Apr 2010 19:43:00 + (UTC)
From: Bob- W7LRD
Subject:[amsat-bb] Arecibo
To: amsat-bb@amsat.org
>
> Nill copy till the last 10 min barely out of the noise. The wes
Was wondering today after searching around on the internet, what radios are
people using for satellite operations as I noticed the ICOM IC-910H and the
Yaesu FT-847 are now discontinued?
Was hoping to get into the SSB/CW satellites but was hoping to do it on a
new radio, but it seems the satell
On a 24elem linear yagi+preamp signal here is very very weak could be one or
two dits from them. Just hope they can get their linear back i
will try JT65B
"-"
Luc Leblanc VE2DWE
Skype VE2DWE
www.qsl.net/ve2dwe
DSTAR urcall VE2DWE
WAC BASIC CW PHONE SATELLITE
__
Greetings all. Having only 12 el on 70cm and no az/el, Arecibo is so not
happening at my QTH. But I digress. I recently went to a new Windows 7 (Intel
Core I-7 processor) computer from a P4 (what a delight.) Anyway, SatPC,
digipan, MMRTTY, HRD all work fine using my Signalink. What no longer
Hello Domenico,
I was waiting till a proper orbit of AO-7 for reply to it. Today ( AO-7 .077
orbit ) I kept a QSO with Roland, PY4ZBZ, Joe, K3SZH and Rocco, W2RTV. And I
did not notice any deviation in the uplink or modulation of the AO-7. The signs
were good between 5/5 and 5/7. However I c
In march they set up the radios in the antenna structure at the feed;
now probably have some feedline loss since relocating to a more
amenable operating room. I cannot watch the TV stream since
something has turned off my active-X on this computer.
73, Ed - KL7UW
At 11:27 AM 4/16/2010, Bill D
I went home for a "lunch break" and was able to copy them on CW (but
not SSB) with the following:
M2 440-18 (an 11' vertical/linear antenna that claims 14.5 dBd)
ARR MSP432VDG-160 preamp (claims 0.55 dB NF)
TS-2000X radio, CW mode, filter width betwen 600Hz and 200Hz
It wasn't arm-chair copy, but
Nill copy till the last 10 min barely out of the noise. The west coast seemed
not to hear very well?? 910/40 el. cp yagi. Hope they get the amp running. The
video streaming is neat. Better luck tomorrow.
73 Bob W7LRD
___
Sent via amsat...@amsat.or
I'm at work and not QRV, but I had no problem copying them with a single 12 el.
yagi leaned again the chair when they did the test a couple of weeks ago, and
most everyone else gave them good reports. At the time, they were running 50w,
a barefoot Kenwood TS-2000. They must have changed rigs i
Hi Rick, WA4NVM
Plese look at the two last drawing of the SV1BSX page:
http://sv1bsx.50webs.com/antenna-pol/polarization.html
You will see that the polarity marked (+) over the dipoles are correct for
both the clockwice CW or RHCP polarization as well for the counterclockwise
CCW or LHCP polariz
Sorry, -13 dB. Kind of distracted with getting my dish set up.
73, Ed - KL7UW
At 10:38 AM 4/16/2010, Edward Cole wrote:
>Alan,
>
>Are you saying try a different CP? If you are linear it should not
>matter what orientation you chose (that is assuming Arecibo is
>CP). I am not ready with the dis
Forward from Arecibo (reported on MoonNet):
>From: Patrick Barthelow
>To:
>Date: Fri, 16 Apr 2010 11:34:57 -0700
>Folks,
>
>
>
>Looks like plenty of updates on Arecibo. I am writing from just
>behind the current op team of Jim Breakall, and Joe Taylor and
>Angel Vazquez. AS has been mention
Alan,
Are you saying try a different CP? If you are linear it should not
matter what orientation you chose (that is assuming Arecibo is
CP). I am not ready with the dish so I quickly tried with my M2
11-element yagi (fixed on horizon) into 0.5 dB GasFet Preamp (Moon
was 14-deg elevation). N
I've heard nothing the last hour.
W8EH
On 4/16/2010 1:20 PM, Mark L. Hammond wrote:
> Just copied somebody on CW!
>
> N8MH
>
>
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to suppor
At 08:25 AM 4/16/2010, Rick - WA4NVM wrote:
>Hi All,
>
>A picture is worth a thousand words.
>
>http://sv1bsx.50webs.com/antenna-pol/polarization.html
>
>Maybe this will help..
>
>73, Rick WA4NVM
>
>
>Subject: [amsat-bb] Re: Arecibo and circular polarization using cheap yagis
>>
>>Or yo
Also hearing them. Be certain, if you can, to try different polarity. It
does make a difference.
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Sebastian
Sent: Friday, April 16, 2010 12:46 PM
To: Mark L.Hammond
Cc: AMSA
At 11:25 AM 4/16/2010 -0500, you wrote:
>Hi All,
>
>A picture is worth a thousand words.
>
>http://sv1bsx.50webs.com/antenna-pol/polarization.html
>
>Maybe this will help..
>
>73, Rick WA4NVM
Rick,
Thank you for this! Book-marked! When I get the chance to do the much
needed mainte
I can hear very faint CW from them.
I'm surprised as I have just a single yagi, and apparently their amp isn't
working.
73 de W4AS
On Apr 16, 2010, at 1:20 PM, Mark L. Hammond wrote:
> Just copied somebody on CW!
>
> N8MH
___
Sent via amsat...@a
> Just copied somebody on CW!
>
> N8MH
Nothing heard yet in Oregon
...
AI7W
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings:
Just copied somebody on CW!
N8MH
At 05:27 AM 4/16/2010 -0500, you wrote:
>Here is a good reference for the Arecibo EME event
>
>
>
>http://www.k2txb.com/2010_arecibo_operation.htm
>
>
>
>
>
>
>
>
>
>
>
>nick
>
>Office 337 593 8700
>
>Cell 337 258 2527
>
>
>
>Helping UL become a wo
Hi All,
A picture is worth a thousand words.
http://sv1bsx.50webs.com/antenna-pol/polarization.html
Maybe this will help..
73, Rick WA4NVM
Subject: [amsat-bb] Re: Arecibo and circular polarization using cheap yagis
>
> Or you can split the feedline equally if one
> antenna is spac
- Original Message -
From: "Edward Cole"
To: "Douglas Quagliana" ; "amsat"
Sent: Thursday, April 15, 2010 11:49 PM
Subject: [amsat-bb] Re: Arecibo and circular polarization using cheap yagis
>
> Or you can split the feedline equally if one
> antenna is spaced 1/4 wavelength ahead of the o
Here is a good reference for the Arecibo EME event
http://www.k2txb.com/2010_arecibo_operation.htm
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
___
Sent
http://www.ustream.tv/channel/kp4ao-eme
73 Trevor M5AKA
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://ams
I recall running in circles years ago trying to figure out why two tracking
programs
didn't agree. Turned out it had to do with a daylight savings time flag that was
(or was not) set correctly. Not sure if this is possible with SATPC32, but just
thought I'd throw it out there for consumption.
Ric
34 matches
Mail list logo