[amsat-bb] satpc32

Where should I go to buy the cable (CT-62) for the FT-817 that connects the CAT jack to the computer (RS-232 probably) for rig control? Anyone know of a cable that has a built-in serial to USB converter? That would make portable use easier. Tnx and 73, Tony, N2UN _

[amsat-bb] SATPC32

I was in the middle of a contact on FO29 when I got repetitive message boxes stating the following: Zugriffsverletzung bei Adresse 00405DFC in Modul 'SatPC32.exe'. Lesen von Adresse 00C0C0C0 The program froze while this was going on. Any ideas? Al W8KHP ___

[amsat-bb] SATPC32 ?

Using SatPC32 I have trouble tracking ISS. I have SatPC32 running on two different WIN98se machines and I get two different tracks. I have the location and time set the same on both machines. Also using the same Keps. One reads 338 -61 with AOS 4:51 LOS 5:00 The other 313 -27 with AOS 4

[amsat-bb] SatPC32

Hi All, I am trying to get my ICom 820H working under CAT. I have an OPC-478UC It is USB to single line CI-V required by the ICom 820H. I have shifted it's output to the tip from the sleeve on the 1/8" phone plug. Under System / Device hardware the OPC 478 shows up as com 3. The radio does not

[amsat-bb] SatPc32

Thanks for help with SatPc32.Must be a better tracking program! Any suggestions? ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscript

[amsat-bb] SatPC32

Hello, If anyone can assist Bruce with his problem, it would be appreciated. 73, Pete, WB2OQQ This message originated from the AMSAT website Sender: Bruce Mertz Email: bmer...@cox.nethost: Subject: Technical Question Message: Having a problem with SatPC32 Version 12.8 Problem: Satellites ar

[amsat-bb] SatPC32

It amazes me, the number of people who, every time a new satellite/radio/rotor/interface etc appears, have to ask how to configure SatPC32 to work with the new equipment. I've never seen this with other software, other than the HRD suite. I've not used SatPC preferring Orbitron or InstantTrack

[amsat-bb] SATPC32 ?

I have been running SATPC32 12.8 for years and love it.This is after trying 3 other program.Its a steal for what it costs.  Jack WA1ZDV ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to supp

[amsat-bb] satpc32

Has anybody connected the Felex 5000 to satpc32? Thanks nick Office 337 593 8700 Cell 337 258 2527 Helping UL become a world Class Engineering and Educational School ___ Sent via AMSAT-BB@amsat.org. Opinions expressed ar

[amsat-bb] SatPC32

Hi Eric ON4HF, I wonder which version of SatPC32 are you using? I have put your lines into DOPPLER.SQF file but it does not do any change! Isn't there any mistake in those lines? Otherwise nasa.all file does not contain RADIOSCAF-B data! It can be found in amateur.txt list only! gl de ha6nn A

[amsat-bb] SatPC32

Hi Guys Many thanks for all the help the Doppler function is now working correctly. My issue was that because all my computers are on a domain the my documents folder is on the server and not the local PC when SATPC32 installed it puts all the .SQF files on the server. Once I realised what wa

[amsat-bb] SatPC32

Having a few issues using SatPC32 and especially Yaesu gear, specifically FT-817 and FT-857. The copy I aa using is not a registered version yet nor have I modified any of the SQF files. When using on the FT-817, I cannot get any response to the radio. It doesn't appear to follow the doppler co

[amsat-bb] SatPC32

Dear Folks, I am attempting to get myself back on the satellites and am having some problems with SatPC32. Although WinAOS gives me accurate satellite position data, SatPC32 does not. Furthermore satellite AOS/LOS data is different between the two programs, sometimes by a half an hour. I ha

[amsat-bb] SATPC32

Thanks Mark, Well, I had the same position data in both AOS and SATPC32. I don't know what was happening, but it seems to have magically resolved itself. Both programs now read the same. Strange. But I think we can attribute it to RF getting into the computer. At any rate I'm glad I didn't

[amsat-bb] Satpc32

Hello All, Recently my Satpc32 software has been predicting the birds about 20 minutes ahead of their actual AOS. I am using the latest version. System clock is accurate and reads the same as the software. Kep data is fresh. My location is loaded accurately. Has anyone experienced this before or

[amsat-bb] satpc32

Having just recieved satpc32 version12.8a via CD, thought it would be nice to print ? manual. I can print the readme file but not thr manual? I am using Vista. I have used IT tracking program for 20+ years and decidded to upgrade. Any thoughts will be appreciated. W7KBM Ken ps hope my age is n

[amsat-bb] satpc32

I am having trouble getting the time right on my sat32pc program. Help. Ken ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: htt

[amsat-bb] SatPC32

SatPC32 not tracking properly. It was working fine and something happened, now the Satellites rise near India and the LVB Tracker starts tracking the bird on that side of the globe. The observer set windows has my longitude and latitude. Any idea what I need to do to fix this problem? My email

[amsat-bb] SatPC32

Old dell computer had a complete melt down everything lost. I now can not find the SATPC 32 CD. How hard is it to get a replacement? John, W0JAB ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join

[amsat-bb] SATPC32

All: Trying to make this work on a new install of Windows7, 64 bit. According to the help file, this should work, but every time I start SATPC32, it wants IOPORT.SYS in WINNT/SYSTEM32/DRIVERS. Which I created, but still doesn't start without complaining. Any suggestions? Thanks & 73, Jim wb4...@

[amsat-bb] Satpc32 ooops

Hello While using satpc32 with the lvbtracker I get a Ungulltige Gleitkammaoperation error message along with that bad "thunk" sound.  What's going on?? 73 Bob W7LRD ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. No

[amsat-bb] SatPC32 question

Hi everyone, There must be an easy way to load Keps from a file on a 3 1/2" floppy, but what is it? (No internet on this laptop, but a floppy drive.) I have 1 USB port that I hope to use for rig control, Where can I find a proper driver for a USB flash drive that the laptop won't recognize?

[amsat-bb] satpc32 qrn

Hello-When I start up satpc32 on my Dell computer I get this annoying qrn hiss on 2M.  Any simple fixes short of moving the computer further away?  It is from the computer not the monitor. 73 Bob W7LRD ___ Sent via amsat...@amsat.org. Opinions exp

[amsat-bb] SatPC32 upgrade

Hello, I have uploaded an upgrade of SatPC32 (V. 12.8a) on my website www.dk1tb.de The changes can be seen here: www.dk1tb.de/Changes128a.txt (if these links fail to work from this email enter them into the address line of your browser). I hope it works. 73s, Erich, DK1TB

[amsat-bb] SatPC32 upgrade

Hello, I have uploaded an upgrade of SatPC32 (V. 12.8a) on my website http://www.dk1tb.de The changes can be seen here: http://www.dk1tb.de/Changes128a.txt I hope it works. 73s, Erich, DK1TB ___ Sent via amsat...@amsat.org. Opinions expressed are tho

[amsat-bb] satpc32 question

Hi, Anyone using a netbook running Windows 7 Starter with SatPC32? Have you used the Radio Shack USB/Serial adaptors with it? I use 2 of them on my desktop without trouble, but will they work with the netbook? What model netbook would you suggest? Any other suggestions? Tricks? Hints and Ki

[amsat-bb] SATPC32 Error

I was wondering if someone could tell me what this error is and the fix for it on satpc32? The error is ole-fehler 80120088 Thanks in advance ! Mike N8GBU ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not

[amsat-bb] Satpc32 error

I have an error on satpc32 and was wondering could help me with it. The error is OLE FEHLER 80120088. Any help would be appreciated! Thank you in advance Mike N8GBU ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the au

[amsat-bb] SatPC32 ==> iPoint

Hi, I recently completed a project that someone on the board might find interesting. One goal was to make it compact so it could be taken and used outside the shack. It weighs 4 lb 5 oz and connects to your computer through a USB or serial port. Another goal was no knobs, switches or any other con

[amsat-bb] SatPC32 simplified

Thanks for all the feedback on the tracker. A few people commented that it was a bit complex mechanically. This got me thinking about a minimal version where the mechanical section could be built in less than an hour by almost anyone. Several people asked about moving antennas. The motor in the i

[amsat-bb] SatPC32 (Question?

*Question? I have "Setup" the Kenwood TS-2000X & completed that 1st. step, & the "readme.txt says "Choose the COM Port # for CAT control" & can't find the box where the words "COM port" is? Can someone help me?73,.Stu (WA2BSS) Ps It is definetly a "3H" day (Near 100 degrees in

[amsat-bb] SatPC32 setup

I just added a new computer to the shack and have SatPC32 all set and running fine. My problem is that during setup, I chose 360 degrees for azimuth instead of 450 and can't change it now. When I go into the rotor setup menu, I can change everything else except for the max azimuth. I had this pro

[amsat-bb] satpc32/moon

Can we get satpc32 to track the moon? 73 Bob W7LRD ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman

[amsat-bb] SATpc32 problem

Hey all, Problem solved. It turns out that the AMSAT kep data was bad. I downloaded the Celestrak keps and all works great. Now, i need to figure out how keep my kep data file accurate. Thank you all for your suggestions, and Erich for the customer service. Steve KI6OQU

[amsat-bb] SatPC32 & Subtones

Good morning, I am hoping someone can help answer a question. I am running SatPC32 12.8a and controlling my Yaesu FT 897 as my uplink radio. Everything works fine except that I cannot get the subtones to update. I am using the following data in my SubTones.SQF file (as recommended in the help f

[amsat-bb] Satpc32 messages

I use Sat Pc as my main sat. program and think it is does a great job. However, not speaking or reading German, I have a hard time understanding the error messages. Has anyone written an updated or translated version with the messages written in English? Merle, AA4QE __

[amsat-bb] satpc32 error

Hi, i suddenly have a problem with my satpc 32. It suddenly has this error. zugriffsverletzung bei adresse 01898848 in module" ihcom02d.dll" .schreiben von adresse 018a 33a8 translated to this Access violation at address 01898848 in module "ihcom02d.dll. write address 018a 33a8 anyone had this

[amsat-bb] satpc32 problem

Hello I am getting a box that says E/A Fhler 105. marching across the screen and I must restart the computer to stop it.  I think I had this before, of course having senior moments I can recall how to fix it. 73 Bob W7LRD ___ Sent via AMSAT-BB@am

[amsat-bb] satpc32 problems

I had to reinstall satpc32.  first  problem ..could not open com port 3    then no source file found for group standard     still getting the error 105 marching across the screen thanks from the digitally challanged 73 Bob W7LRD ___ Sent vi

[amsat-bb] satpc32 help

I updated the keps and now when I open satpc32 I get a error message that keep repeating and the only way to abort the error message is to reboot. Removing the keep file does not fix the problem. Help?? Thank nick ___ Sent via AMSAT-BB@amsat.or

[amsat-bb] SatPC32 "issue"

I was trying to do another configuration on SatPC32, when I clicked on Configuration 2 I get a pop up that says E/H Fehler 105 and I can't get out of the loop. Any suggestions? Dave - KB1PVH Sent from my Verizon Wireless DROID X ___ Sent via AMSAT-BB@am

[amsat-bb] Satpc32 question

After a few months of inactivity, SATpc32 is showing a funny but unfortunate feature: out of the 6 sats I have active (no change from previous use), only the linear birds show up on the screen. They are shown in the normal way, with the outline of their footprint always visible. The FM birds

[amsat-bb] SatPC32 Question

Satellite newby here, trying to setup a station... For all you SatPC32 users, a question. I'm using the software with 2 radios. One is an Icom IC-706MKIIG, the other is a Icom IC-746. While the 706 covers vhf and uhf, the 746 only covers vhf. The way my version of SatPC32 is set, it tries (d

[amsat-bb] satpc32 winaos

the aos in winaos program is about 12 min. before the actual aos. Being slightly digitally challenged I am having a problem figuring it out. working them till they drop 73 Bob W7LRD ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the

[amsat-bb] SatPC32 & Flex5000A

Ive started experimenting with converters and/or transverters on my Flex5KA, using it as my receiver and an FT-847 as the uplink. I use SatPC32 to control both radios. I've got the Flex setup as rdaio 1 using the Kenwood TS-2000 configuration and radio 2 is set to the FT-847. It seemed to work for

[amsat-bb] satpc32 etc

Thanks to many and Dave KB1PVH I can now input keps in my computer all by myself. I read this in the weekly AMSAT bulletins The Castor 30 second stage motor, built by ATK, ignited for a burn lasting two-and-a-half minutes, accelerating the rocket to more than 17,000 mph. Engineers declared th

[amsat-bb] satpc32 doppler ??

While using Satpc32 for doppler correction (IC-910H) often I have to "tweek" the calibration using the CAT function. The amount of "tweeking" can vary between satellites and orbits. At times I will simply turn off the auto function and just go manual. Is there a method I can depend more on the

[amsat-bb] SatPC32 Registration

I need some advice on how to solve this. I downloaded  and installed SatPC32 V.12.8b a few weeks ago and got it up and working as it should.It is a cool program. I also  ordered the Registration on paypal last week , but have yet to receive the registration information email. I sent an email and

[amsat-bb] satpc32 error

putting satpc 32 v12.8c on another computer - get a old-fehler 8005403a error- suggestions?? 73 Bob W7LRD ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite pro

[amsat-bb] SatPC32 question

Birders, I’m confused about the required entries into DOPPLER.SQF, and would appreciate your help. In entering the line required for AO-73, is the order LSB,USB or the reverse, USB, LSB? The source of my confusion is that the instructions in the software indicate “Up- and Downlink modes” while

[amsat-bb] SatPC32 question

Thanks Eric and Dave, The file is done. CU on the birds. 73, Tony, N2UN --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of

Re: [amsat-bb] SatPC32

John, You should be able to simply download the program file from http://www.dk1tb.de/downloadeng.htm Choose the appropriate version for your locale. The manual can also be downloaded here. Whereas, this is comes as the demo version, if you simply enter your registration information it will acti

[amsat-bb] satpc32 %$#$ again

This is on different computer- I get Ungultige gleitkommaoperation marching across the screen.  I must shut the computer down to stop it.  I had just downloaded new keps.  The last time (other computer) I had to delete the entire program and start from scratch with everything.  Is there somethin

[amsat-bb] satpc32 problems

Still attempting to make satpc32 work.  Removed it from hard drive, downloaded from Erics site, now get error 1925 not sufficient privileges etc etc.  The next sound you hear will be the computer flying out the window.  Assistance please. from the digitally challanged 73 Bob W7LRD   

[amsat-bb] SatPC32 Question

Hi All, I just installed (upgraded) to SatPC32 v. 12.8c. Now, I have two installations here. One on my new laptop, and one on my desktop PC. Laptop is for portable work, of course. I noticed that on my laptop installation, on the SETUP menu OPTIONS dialog, there is a checkbox for GROUND TRAC

Re: [amsat-bb] SATPC32

Jim, IOPort.SYS is a 32-bit kernel driver which doesn't work on 64-bit Windows. On 64-bit Windows the SatPC32 setup program installs it to C:\Windows\SydWOW64\drivers. It is used (on 32-bit systems only) with some rotor interfacce (IF-100, FODTrack etc.). These interfaces therefore can't be us

[amsat-bb] SATpc32 doppler.sqf file

Does anyone have a current up to date doppler file for SATpc32 I could get, mine is so messed up from attempts to add a few of the newer birds. I would be grateful if yours already has the newer birds added... 73 and CUL de VE3TES Marc Tessier ve3...@hotmail.com _

[amsat-bb] SatPC32 doppler file

Hi, Could somebody send me his doppler file for SatPC32 ?? I'm a newbie, and I would like to figure it out how FO-29 and VO-52 are configured in this file. I actually trying to "calibrate" my setup to use those birds. I'm using 2 FT-817ND with SatPC32. Works great !! 73 -- Jean-François Ménard

[amsat-bb] SatPC32 Not Tuning

I am trying to get SatPC32 v12.8 to automatically tune my FT847. When the program first comes up, the radio is initialized as indicated by the "CAT" display and when I click on a satellite, the radio tunes to the correct satellite. That's where it stops; it no longer changes the frequency of

[amsat-bb] SatPC32 Not Tuning

You might also try playing with one of the other settings. It's been a while since I've used SatPC32, so don't quote me on the name of the setting, but it may be the CAT delay. On my 817 I had to change the setting from the default of 120ms to 250ms. Tim KI6VBY ___

[amsat-bb] SatPC32 doppler.sqf file

Gentlemen, It seems the doppler.sqf file is missing grom the SatPC32 software which is the best stand alone satellite tracking software I've ever seen. Would someone send me -or to the list- a sample file to be able to track satellites using Doppler tuning? Otherwise CAT works fine with my FT-

[amsat-bb] SATPC32 config files

I hadn't used SATPC32 in a while, opting for HRD instead, but HRD is awfully flakey at connecting to my 817 sometimes and also inexplicably reverses the downlink and uplink frequencies for no reason sometimes. So, I decided to give SATPC32 a try again, but I found that when I load it, it essentiall

[amsat-bb] SatPC32 Auto Doppler

Hello to everyone Is it possible to use SatPC32 12.8a without auto Doppler correction? I use 2 separate transceiver one for uplink the other for downlink,all I want to do is be able to change the downlink freq. and let the uplink follow according to the Doppler sqf file.I want no automatic Dopple

[amsat-bb] SatPC32 - FT-817

James Brown (no, not THAT "James Brown") needs assistance with SatPC32 - Would a SatPC32 guru please answer him directly at ... jimki...@sbcglobal.net JAMES: Wondering if you have instructions to make ft817 and ft857 connect to sat32pc and how that works. I have the 857 working as primary. Tha

[amsat-bb] SatPC32 - Quick Review

I am working on a deadline today - I just need a couple of you to reply ... Regarding SatPC32 ... Would you recommend SatPC32 for a "newbie" to the FM satellites for tracking? Easy to update AMSAT keps? Easy to set up home coordinates? (Still need to register to have that preference stick, I

[amsat-bb] SATPC32 and FT847

Hi all, In an attempt to dabble my toes in the linear transponder pool, I asked a FT847 owner friend to bring his rig over to try and understand the mechanics of making it all work with the computer interfaced. Got SatPC32 to communicate at 9600, 8, none, 1, none, with the radio and the radio res

[amsat-bb] SatPC32 Band Change?

Hello Erik et al, I'm using SatPC32 with an ICOM 821H. Is it possible to have SatPC32 change the up/down band for each satellite? The way I have it working now, I have to manually swap bands. Paul Delaney paul.hamra...@verizon.net http://k6hr.dyndns.org:8080 ___

[amsat-bb] SATPC32 - Keps Path

Is there a way I can change the default PATH for my Keps files in SatPC? I like to keep one Kep file on one computer and load them over my LAN to the other computers/programs. I want to start using SatPC again after not being very successful using HRD Sat Tracker on ARISSat-1. It seems that

[amsat-bb] SatPC32 Doppler.SQF file

Hi Group Have just downloaded the trial version of SATPC32 and have most things working ok. The only thing I cant get to work is the Doppler tracking SatPC2 controls the rig an Icom 910 fine with the default satellites well. It give examples of what to added in the Doppler.SQF file so here

[amsat-bb] SatPc32 kepler Data

Hello all I have an older laptop that has no internet connection,I run Satpc32 on my main computer that has internet connection and I am able to update the kepler data.I want to use the kepler data from my main computer,and copy it to my laptop via USB flash drive.I cant seem to find the keple

[amsat-bb] SatPC32, Gpredict etc.

There are a huge number of tracking/station control programs out there. We eventually pick one that meets our needs and learn how to use it. My main interest is in the user interface and ease of use. When we use any program for a long time it starts to seem to seem to be intuitively obvious how to

[amsat-bb] SatPC32 Releasing Ports

I have an issue that appears to be with SatPC32 although I could be wrong. When I use SatPC32, all works fine with my USB-to-serial adapter controlling the radio. If I shut down SatPC32 and start HamRadioDeluxe, generally speaking, I cannot control HRD. It's as if the USB-to-serial adapter is

[amsat-bb] SatPC32 Error Messages

On startup, I get OLE-fehler 80045030 in a popup box. This happens twice before the program will start. Anyone have this problem too? Thanks, Elan - WB2IOL ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA me

[amsat-bb] SATPC32 and Vista

A ham friend is having a problem with SATPC32. He didn't know what version he is running. His computer is running Vista and when he tries to load SATPC32, he gets a prompt that mentions a "64 bit" problem. Sorry to be so vague, but I'm getting this second hand. Has anyone had a problem that soun

[amsat-bb] SatPC32 stopped working!

My SatPC32 stopped working. I get an error message "Warnung: No source file was found for group Standard. Please select a source file for this group after the 'OK'. IMPORTANT: In orcer to store the filename for later starts open the menu 'Satelliten' and click on the 'OK' - button. The SatP

[amsat-bb] SatPC32 & Easy Com

Can anyone tell me if SatPC32 works with Easy Com style rotor interfaces? Rick W2JAZ ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription set

[amsat-bb] SatPC32 Help Needed

Thanks for reading this. I recently installed SatPC32 from an AMSAT purchased CD onto a new WIN 7 laptop with a dual-core Pentium processor. The laptop is interfaced with a Yaesu FT-857D for 144MHZ and a Yaesu FT-897D for 432 MHZ. The interface is via a STAR-TECH Express Card serial adapter which

[amsat-bb] SatPC32 & Windows 7

Hi all, Anyone running and IC-910H with SatPC32 and Windows 7 64-bit? Everything seems to work except for the CAT function. I have the proper port selected for the radio, but cannot get CAT to do any controlling. Any help would be appreciated. Thanks & 73 Bob Herrell AJ5C __

[amsat-bb] SatPC32 rotor question

I had this question posted to me, and I can't seem to figure out if it is possible. >.I want my rotator to stop at about 85 Deg elevation and not go to 90 , 100 , 110 etc etc but to rotate on its asmith by >180 deg and then start to drop elevation from 85 Deg.. I know that the rotor interface u

[amsat-bb] SatPC32 question..& IC910H

I'm stumped.. I have CAT control turned on and ISS selected. In CAT control, I have 144.49 and 145.800 selected and that is what shows in the uplink/downlink widow above the map. SATL function is on in the radio. BUT, the top window on the radio shows 145.800, but the bottom window (vfo a)

[amsat-bb] SatPC32 Add-On

Here is a video demonstrating a feature I hoped to turn into a SatPC32 Add-On. It is actually quite interesting and I think it would be quite useful when giving demos. The video is HD and looks best viewed full screen in 720p. http://www.youtube.com/watch?v=g1K1sIw_F8Y 73 W9KE tom ... __

[amsat-bb] SatPC32 Rotor Control

Has anyone made SatPC32 work with EA4TX's new ARS-USB controller? If so, how? 73, Fraser, W3UTD ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! S

[amsat-bb] satpc32 frequency correction

Hi all! What is the easiest way to compensate for the frequency deviation of the satellite in sat pc 32? Going to the cat menu gives me several options. I am in a maze of twisty passages all alike. Which one is the right choice? 73 de Norm n3ykf ___ Sent

[amsat-bb] satpc32 sqf adjustment

Hi all! What is the offset in satpc32 for AO-7? Will be up for the 9z ish pass. 73 es see you on the birds n3ykf/oa4 ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satel

[amsat-bb] Satpc32 install problem

Trying to install on my MacBook Pro running win7 under boot camp fails suggesting that I don't have admin permissions At login. I don't understand how to get around this as I login with my password on boot up and don't recall having this problem in the past. Suggestions? Right clicking on setup doe

[amsat-bb] SATPC32 - amsat keps

I noticed today that SATPC32 failed on downloading keps from AMSAT. I found the URL had changed to http://ww2.amsat.org/amsat/ftp/keps/current/nasa.all (www was changed to ww2) Is this a permanent change? Maybe this was in response to the rebuild post hack? Mike -- 73, Mike, N1JEZ "A clos

[amsat-bb] SATPC32 & AO73 question

Hi all, In spite of my usual ineptness with this program, I have managed to have it talking to my FT-847, downloaded the keps for AO73 and appear to be tracking it!! However, I can't seem to get the radio to hold the up/dn frequencies in the proper VFO's. I start out with the uplink showing

[amsat-bb] SatPC32 - New version

All, Please note there is a new version (12.8c) of SatPC32 available for download. This version has a number of new features - like attaching the "Countdown" window to the main window. Thanks to everyone for helping me over the past few weeks with a number of topics. I am now fully active

Re: [amsat-bb] satpc32 %$#$ again

Hi Bob, Maybe just go back to using your OSCAR Locator? There are overheads developed for FO-29 and AO-7 to use with it. 73 Clayton W5PFG On Thu, Jun 5, 2014 at 2:49 PM, Bob- W7LRD wrote: > This is on different computer- I get Ungultige gleitkommaoperation > marching across the screen. I mu

Re: [amsat-bb] satpc32 problems

Bob, run the setup program "as administrator" even if you are the administrator. There is a link on my website directly above the links that download the installation ZIP files: Read this before you dowload one of the files, please Section B 1 d of th

Re: [amsat-bb] satpc32 %$#$ again

Hi Bob, I experience similar issues lately ALT-F4 and windows task manager can help to prevent from rebooting your PC. In my case this behaviour occurs when object ID's are changed or removed from the kepler input files. Lately we had Kicksat, Phonesat and other cubesats that burned up in t

Re: [amsat-bb] satpc32 problems

Hi Bob, The question raised by you and others reminded me of a simple little program I wrote a couple of years ago and never released. Ashamed to say that I gave into PITA when I could not figure out the link between a Group and its associated tle data file (perhaps there is no external link). The

Re: [amsat-bb] SatPC32 Question

Hi Jerry, I added the "Start with Gt+" feature in Febr. 2014 - a suggestion of Ron, W5RKN. Download the latest setup file or install the setup file you installed on your Laptop also on your desktop PC. 73s, Erich, DK1TB Am 09.06.2014 03:08, schrieb n0jy: Hi All, I just installed (upgraded)

Re: [amsat-bb] SatPC32 Question

Hi Erich, Yes! I had downloaded but not yet installed (don't know why) 12.8c on my desktop PC back in January this year. When I went to do the upgrade yesterday, I first was going to copy the zip file from the laptop but when I saw the same version already in the downloads on my desktop PC I

[amsat-bb] SATPC32 - ISS portion

Been awhile since I used the program with my FT 847. Should changing the C to C+ be putting the radio in CAT mode? It is not Also looking for the red TX and RX buttons Thanks, Ted K7TRK ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are tho

Re: [amsat-bb] SatPC32 question

Hi Jim, You are correct that you need to get the Keps in the same group to display them at the same time. They will eventually migrate, and you can request that from Tim Kelso on his web site to speed the process up. As for seeing them simultaneously, use Multitrack. First go to Satellites. O

[amsat-bb] Satpc32 with 2 Transceivers

Good morning everyone Trying to run Satpc32 with a FT897d and FT817nd The ft897nd is on the uhf antenna and the ft817nd is on the vhf antenna it all seems to work on the FM sats but having some problems with ssb sats AO7,VO52,FO29 The trouble I am having is on the calibration of the freq. and dopp

[amsat-bb] SatPC32 with 2 Transceivers

Hello to all Well it has been resolved,got my FT897D and FT817ND working with Satpc32 and I am now able to run 1 as downlink the other as uplink and the freq. calibration working. I would like to thank all who replied to my problem and a very special thanks to Erich DK1TB who was able to supply

[amsat-bb] satpc32 and labjack help

I have satpc32 and labjack is there a stall command option ? Thanks nick ___ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: h

[amsat-bb] SatPC32 V8 Doppler.SQF HELP

Can someone direct me to the location of the Doppler.SQF file in V8? I cannot find the file in the SatPC32V8 directory. In fact I cannot find any of the SQF files that are plentiful in V7. I wanted to add the freqs for DO64 and SO67 and cannot seem to pull it off Thanks in advance

  1   2   >