Dear;
regarding the details that i found on the site about spandsp; is it
correct to assume the following ?
+ spandsp will only work with a card that is located in the * box?
therefore
will my welltech or any other voip fxo adapter support FAX ( i know it
does t.38)
--
My current situation
Graham Turner a écrit :
Steve, ? Daniel thanks for reply posts
the location i download from is as per technote on * installation;
export CVSROOT=:pserver:[EMAIL PROTECTED]:/usr/cvsroot
This only for *, nothing todo with spandsp
prior to the last download i had to manually install the rxfax /
Danny Zak a écrit :
Dear;
regarding the details that i found on the site about spandsp; is it
correct to assume the following ?
+ spandsp will only work with a card that is located in the * box?
should also work with ztdummy if you don't have a card.
--
Daniel
Has anyone made spandsp to work with a digium tdm fxo card?
I finally got the rxfax and txfax modules to compile, the spandsp lib
installed (and in the libpath), and now receive:
-- Starting simple switch on 'Zap/1-1'
-- Executing RxFAX(Zap/1-1, /var/fax.tif) in new stack
-- Hungup
at last (using libtiff 3.5.7 as Mike Machado suggested) i was able to get
spandsp working on my debian sid 2.6.8.1, with * up to 18-08-2004 and
bristuff 4a
i've tested only fax receiving and the file on /var/spool/asterisk-fax/
contains only the first 3-4 cm. of page sent
sending fax notified
On Sunday 19 September 2004 00:46, Edward Eastman wrote:
I think the port.h in this distribution may have been created from
tiffv3.5.7 while you have tiffv3.6.0 - (or maybe something else), anyway I
had this problem, and installing tiffv3.5.7 and copying the port.h from
that distribution to
Are you applying spandsp against a recent * cvs?
On Sunday 19 September 2004 00:46, Edward Eastman wrote:
I think the port.h in this distribution may have been created from
tiffv3.5.7 while you have tiffv3.6.0 - (or maybe something else), anyway I
had this problem, and installing
On Monday 20 September 2004 14:49, Rich Adamson wrote:
Are you applying spandsp against a recent * cvs?
no, i use bri_stuff last ver, it's up to 18-08-2004
Maurizio
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
I am attempting installation of spandsp on to an Asterisk installation on
Linux RH9
the distribution i am using is that are URL http://ftp2.tootai.net - the
README for which i have followed verbatim -
my only issue on this was the target for the port.h / tif_dir.h / tiffiop.h
files in the
Graham Turner a écrit :
I am attempting installation of spandsp on to an Asterisk installation on
Linux RH9
the distribution i am using is that are URL http://ftp2.tootai.net - the
README for which i have followed verbatim -
It's not a special distribution, it's the original one. It's just
administrator tootai wrote:
Graham Turner a écrit :
I am attempting installation of spandsp on to an Asterisk
installation on
Linux RH9
the distribution i am using is that are URL http://ftp2.tootai.net - the
README for which i have followed verbatim -
It's not a special distribution, it's
: No such file or directory
Tiffiop.h is just not present on any partition. I am running RH ES 3.0
Paul.
-Original Message-
From: admin [mailto:[EMAIL PROTECTED]
Sent: September 20, 2004 8:55 AM
To: asterisk-users
Subject: Re: [Asterisk-Users] spandsp / compilation errors
Graham Turner
[EMAIL PROTECTED] a écrit :
[...]
gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -c t4.c -MT t4.lo -MD -MP
-MF .deps/t4.TPlo -fPIC -DPIC -DPIC -o t4.o
t4.c:38:21: tiffiop.h: No such file or directory
Tiffiop.h is just not present on any partition. I am running RH ES 3.0
Which means, if you took
, 2004 3:54 PM
Subject: Re: [Asterisk-Users] spandsp / compilation errors
Graham Turner a écrit :
I am attempting installation of spandsp on to an Asterisk installation
on
Linux RH9
the distribution i am using is that are URL http://ftp2.tootai.net - the
README for which i have followed
-Users] spandsp / compilation errors
[EMAIL PROTECTED] a écrit :
[...]
gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -c t4.c -MT t4.lo -MD -MP
-MF .deps/t4.TPlo -fPIC -DPIC -DPIC -o t4.o
t4.c:38:21: tiffiop.h: No such file or directory
Tiffiop.h is just not present on any partition. I am running
- Original Message -
From: administrator tootai [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Monday, September 20, 2004 3:54 PM
Subject: Re: [Asterisk-Users] spandsp / compilation errors
Graham Turner a écrit :
I am
[EMAIL PROTECTED] wrote:
Thanks, I applied that patch and get an error on modules load after
rebuilding *:
[app_rxfax.so]Sep 20 10:08:59 WARNING[-1084751200]: loader.c:248
ast_load_resource: libspandsp.so.0: cannot open shared object file: No
such file or directory
Sep 20 10:08:59
debian sid with 2.6.8.1 kernel
at last i was able to get spandsp compiled (see my last post)
now i try to receive a fax but ...core dump!! :(
here the output at console (nothing under /var/log/asterisk):
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Start receiving document
Changed
libspandsp.so is indeed under /usr/local/lib
How can I verify my lib path (feel stupid for asking) ?
Paul Seniuk
-Original Message-
From: steveu [mailto:[EMAIL PROTECTED]
Sent: September 20, 2004 10:54 AM
To: asterisk-users
Subject: Re: [Asterisk-Users] spandsp / compilation
On Monday 20 September 2004 18:54, Steve Underwood wrote:
I would think its because it cannot find libspandsp, wouldn't you? Is it
installed? Is it installed in your library path? Like most things built
with the ./configure/make make install sequence, the default is for the
library to go in
What version of libtiff you have? I had similar problems until I
switched down to 3.5.7, and now all faxes work perfectly. Make sure to
fully remove older/newer versions before installing a new libtiff.
On Mon, 2004-09-20 at 10:02, Maurizio Marini wrote:
debian sid with 2.6.8.1 kernel
at last i
a look in /var/log/asterisk/messages but not in there ??
- Original Message -
From: Mike Machado [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Monday, September 20, 2004 5:51 PM
Subject: Re: [Asterisk-Users] spandsp / compilation errors
I am trying to use spandsp 0.0.1k-whole.
I have 2 X100P working well for inbound/outbound calls.
I have tried libtiff 3.6.1 and 3.5.7
With 3.6.1 I get only faxes all black, and 3.5.7, I get blank vertical
lines and the rest all black also.
During the transmittion, apparently there is nothing
Hi Rob,
I used RxFax some time ago with success but the last CVS of asterisk
crashes when asterisk is going to start receiving data.
I'm trying with tiff-3.5.7 spandsp-0.0.1k and last asterisk CVS...
What versions do you use?
On Fri, 2004-09-10 at 14:09 -0500, Rob Fugina wrote:
I've
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Maurizio
Marini
Sent: 17 September 2004 11:31
To: [EMAIL PROTECTED]
Cc: administrator tootai
Subject: Re: [Asterisk-Users] spandsp
On Thursday 19 August 2004 23:29, administrator tootai wrote:
I made one. Can be found at
http://ftp2
On Thursday 19 August 2004 23:29, administrator tootai wrote:
I made one. Can be found at
http://ftp2.tootai.net/spandsp-0.0.1k-whole.tar.gz The 3 headers files
are included, made a short readme file for installation and modify the
Makefile.patch (remove the dtmftotext). Comments welcome.
Spandsp
I cannnot get the command patch Makefile.patch to work when trying to use
rxfax etc.
The app_rxfax.c and txfax are in the apps dir but the command just sits
there and doesn't do anything.
It's a standard cvs install, has anyone got a working patch makefile I can
grab ?
Cheers
d
-Commercial Discussion'
Subject: RE: [Asterisk-Users] spandsp
Spandsp
I cannnot get the command patch Makefile.patch to work when trying to use
rxfax etc.
The app_rxfax.c and txfax are in the apps dir but the command just sits
there and doesn't do anything.
It's a standard cvs install, has anyone got
Steve or anyone...
Will spandsp install on the current cvs?
Looked like the code at ftp.opencall.org/pub/spandsp was intended
to be applied to the old stable release. Anyone know?
Rich
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Good evening all,
to complete test that I made in august (and which where discussed here)
about garbage when receiving fax, I went more down in my tests.
At first, my setup is an * CVS-HEAD-09/08/04, spandsp-0.0.1k, X100P
(Tiger Jet Network Model 300 128k), kernel 2.4.26 on an SMP SoftRaid
I've recently started playing with the RxFax application on my
Asterisk box. I've had success, mostly, but I've had some failures,
too...
The most recent failure is specific to receiving from a particular fax
machine -- a Canon Laser Class 9000S. The TIF images received are
readable, but the
Rob Fugina wrote:
I've recently started playing with the RxFax application on my
Asterisk box. I've had success, mostly, but I've had some failures,
too...
The most recent failure is specific to receiving from a particular fax
machine -- a Canon Laser Class 9000S. The TIF images received are
Can anyone help me out here
When I make spandsp-0.0.1 I get the following error message(s) on Fedora
Core 2
Help or suggestions / fixes would be great
I have searched the threads and found and tried all sorts of
suggestions
---
In file included from /usr/include/tiffiop.h:45,
Dear Steve
the first line of t30.c is
-
#define LOG_FAX_AUDIO
/*
* SpanDSP - a series of DSP components for telephony
*
* t30.c - ITU T.30 FAX transfer processing
*
* Written by Steve Underwood [EMAIL PROTECTED]
*
* Copyright (C) 2003 Steve Underwood
*
--
I
Hi,
If that is what you are running, you should be getting audio log files.
The have names like /tmp/fax-rx-audio-date and
/tmp/fax-tx-audio-date. I need a matching pair and the console log for
investigation.
Regards,
Steve
reseaux wrote:
Dear Steve
the first line of t30.c is
-
How to force * to write txfax console log into file ?
On Thu, 2004-08-26 at 13:24, Steve Underwood wrote:
Hi,
If that is what you are running, you should be getting audio log files.
The have names like /tmp/fax-rx-audio-date and
/tmp/fax-tx-audio-date. I need a matching pair and the
Dear Steve
thanks for help, i now trace the log but no audio in /tmp
-
-- Starting simple switch on 'Zap/35-1'
-- Executing RxFAX(Zap/35-1, /home/user/testfax.tif) in new stack
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Hi,
The following part of your log:
Fast carrier up
Ouch ... error while writing audio data: : Broken pipe
Ouch ... error while writing audio data: : Broken pipe
Floating point exception
would seem to indicate some problem with the libaudiofile on your
machine. I guess libaudiofile must be
Dear Steve
i use Mandrake 9.2 with libaudiofile0-devel-0.2.3-6mdk
libaudiofile0-0.2.3-6mdk do you think is correct version?
After that message Asterisk crash..
Thanks
Dimitri
On Thursday 26 August 2004 13:33, Steve Underwood wrote:
Hi,
The following part of your log:
Fast carrier up
On Wednesday 25 August 2004 23:50, Steve Underwood wrote:
Several people have reported problems sending faxes from spandsp-0.0.1k
to Canon FAX machines. A spandsp user had the same problem with another
make of FAX machine, and traced the problem to a bug in the file t30.c
of spandsp. Line 542
On Thu, 2004-08-26 at 09:38, Andrew Kohlsmith wrote:
On Wednesday 25 August 2004 23:50, Steve Underwood wrote:
Several people have reported problems sending faxes from spandsp-0.0.1k
to Canon FAX machines. A spandsp user had the same problem with another
make of FAX machine, and traced the
Hi,
Several people have reported problems sending faxes from spandsp-0.0.1k
to Canon FAX machines. A spandsp user had the same problem with another
make of FAX machine, and traced the problem to a bug in the file t30.c
of spandsp. Line 542 says s-t4.rx_file[0] where it should say
Dear Steve
i have try the SpanDSP (ver.k and latest Asterisk cvs) with the mod
you have
write below, but nothing my Canon Fax still dont send the fax:
-
-- Executing RxFAX(Zap/35-1, /home/user/testfax.tif) in new stack
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Hi,
Several people have reported problems sending faxes from spandsp-0.0.1k
to Canon FAX machines. A spandsp user had the same problem with another
make of FAX machine, and traced the problem to a bug in the file t30.c
of spandsp. Line 542 says s-t4.rx_file[0] where it should say
Hi,
You are trying to receive from a Canon FAX machine. The problem I hope
the change will fix is in sending *to* a Canon FAX machine. The user who
found the bug in spandsp was trying to send to a Philips FAX machine.
During negotiation the Philips sent a disconnect message, which is the
same
Hello,
I receive an error during the make of spandsp on a sparc machine. I have
tried it with libtiff 3.5.7 and 3.6.0, but get the same error.
spandsp/mmx.h: In function `mm_support':
spandsp/mmx.h:72: error: unknown register name `edx' in `asm'
spandsp/mmx.h:72: error: unknown register name
Please can someone send me the .tar.gz file of spandsp, the site is
offline and i didn't find it anywhere!
Than!
Roland Zagler
mailto:[EMAIL PROTECTED]
@fog smart partners
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
On Sun, 2004-08-22 at 07:35, Roland Zagler wrote:
Please can someone send me the .tar.gz file of spandsp, the site is
offline and i didn't find it anywhere!
http://sremington.zapto.org/downloads/asterisk/spandsp/ until the
opencall.org DNS servers are back up.
-Seth
--
Seth Remington
William Glynn ha scritto:
I'm using Gentoo's tiff-3.5.7-r1 package, which appears to be built
from virgin (unpatched) 3.5.7 sources.
So it must be ok.
Strange, again. I've not tried loopback, but my incoming/outgoing faxing
works like a charm, via SIP. I don't have any pstn hardware, my pstn
Simone Ricci a écrit :
William Glynn ha scritto:
I'm seeing training errors that often stop fax machines from even
starting delivery, lots of errors from libtiff regarding unexpected
line lengths, and garbled data even if RxFax thinks it's okay.
Strange. Which version of libtiff are you using?
I
administrator tootai ha scritto:
I just finish installation and give it a try on reception: same problems
than related by William. Seems that around 20 first kb of data's are
approximatively ok and the garbage start (unexpected line lengths)
[ ... ]
I use an X100P. SMP (2 celeron 400) 440 Mb
Simone Ricci a écrit :
[...]
Bingo! Maybe spandsp isn't SMP friendly...thus it doesn't work with
multiprocessor/hyperthreading systems? Can anyone confirm this?
Eventually, try booting your system with a non-SMP kernel, just to see
what happens.
If nobody do it this days I will do it next week.
I use an X100P. SMP (2 celeron 400) 440 Mb RAM, with RH73
kernel 2.4.26, libtiff 3.5.7. So could be an SMP issue ...
Bingo! Maybe spandsp isn't SMP friendly...thus it doesn't work with
multiprocessor/hyperthreading systems? Can anyone confirm this?
Eventually, try booting your system
oops. sent this last night - I was getting this list on an alias that I didn't
send from.
Hello,
I am attempting to setup spandsp on debian-unstable-2.6.7-recent-HEAD. Gnome
requires libtiff3g 3.6.1-1. I downloaded libtiff 3.5.7 and 3.6.0 and was
able to install 3.5.7,spandsp, and reinstall
On Wed, 2004-08-18 at 23:20, Adam Goryachev wrote:
On Thu, 2004-08-19 at 07:01, Seth Remington wrote:
On Wed, 2004-08-18 at 14:45, David Filion wrote:
Does anyone know of an alternate source for spandsp? opencall.org is
down and all the links returned by Google just point to the dead
FWI, I'm using it very successfully. Where's your problem?
My system is running Fedora Core 2, libtiff and libtiff-devel as
provided by distro (installed with apt-get, version 3.5.7). I've got to
add some headers in /usr/include to get it work: tiffiop.h, tif_dir.h
and ports.h
Hope this helps.
FWI, I'm using it very successfully. Where's your problem?
My system is running Fedora Core 2, libtiff and libtiff-devel as
provided by distro (installed with apt-get, version 3.5.7).
I've got to add some headers in /usr/include to get it work:
tiffiop.h, tif_dir.h and ports.h
Hope this
Simone Ricci a écrit :
FWI, I'm using it very successfully. Where's your problem?
My system is running Fedora Core 2, libtiff and libtiff-devel as
provided by distro (installed with apt-get, version 3.5.7). I've got
to add some headers in /usr/include to get it work: tiffiop.h,
tif_dir.h and
- Original Message -
From: Simone Ricci [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, August 19, 2004 10:40 AM
Subject: Re: [Asterisk-Users] spandsp
FWI, I'm using it very successfully. Where's your problem?
My system is running Fedora Core 2, libtiff and libtiff-devel as
provided
William Glynn ha scritto:
I'm seeing training errors that often stop fax machines from even
starting delivery, lots of errors from libtiff regarding unexpected
line lengths, and garbled data even if RxFax thinks it's okay.
Strange. Which version of libtiff are you using?
However, I've gotten TxFax
administrator tootai ha scritto:
From where you got port.h? I install tiff-3.5.7 (I'm running an RH73
with those rpms installed) and didn't manage to create this file.
tiffiop.h and tif_dir.h are parts of tar.gz package. I had to modify
tiffiop.h and replace port.h with tiffcomp.h but I'm
Jon Bebeau ha scritto:
1) Where did you get the C headers from (what dir).
tiffiop.h and tif_dir.h somewhere in the libtiff's 3.5.7 source .tar.gz
port.h with google's help. I can send my version to you if you wish. It
worked for me.
2) What HW are you using (processor, motherboard)
Intel(R)
I've seen people mention that they have fax reception working with
Asterisk, spandsp, and app_rxfax.
I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest
app_rxfax.c (as mirrored by friendly list members recently), and libtiff
3.5.7. Asterisk is detecting the fax signal
I'm seeing training errors that often stop fax machines from even
starting delivery, lots of errors from libtiff regarding unexpected
line lengths, and garbled data even if RxFax thinks it's okay.
Strange. Which version of libtiff are you using?
I'm using Gentoo's tiff-3.5.7-r1 package,
Simone Ricci a écrit :
administrator tootai ha scritto:
From where you got port.h? I install tiff-3.5.7 (I'm running an RH73
with those rpms installed) and didn't manage to create this file.
tiffiop.h and tif_dir.h are parts of tar.gz package. I had to modify
tiffiop.h and replace port.h
Anyone knows where can I find spandsp? Official site seems permanently
down...
TIA,
Simone.
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
Does anyone know of an alternate source for spandsp? opencall.org is
down and all the links returned by Google just point to the dead site.
Thanks
David Filion
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
On Wed, 2004-08-18 at 14:45, David Filion wrote:
Does anyone know of an alternate source for spandsp? opencall.org is
down and all the links returned by Google just point to the dead site.
Thanks
David Filion
I threw a copy up here for you:
]
To: [EMAIL PROTECTED]
Sent: Wednesday, August 18, 2004 5:01 PM
Subject: Re: [Asterisk-Users] spandsp
On Wed, 2004-08-18 at 14:45, David Filion wrote:
Does anyone know of an alternate source for spandsp? opencall.org is
down and all the links returned by Google just point to the dead site
On Thu, 2004-08-19 at 07:01, Seth Remington wrote:
On Wed, 2004-08-18 at 14:45, David Filion wrote:
Does anyone know of an alternate source for spandsp? opencall.org is
down and all the links returned by Google just point to the dead site.
Thanks
David Filion
I threw a copy up
Hi all,
Can anyone please mail me the files from ftp.opencall.org (app_rxfax.c
app_txfax.c, Makfile.patch, ...), because I need them desperately and
the server seems to be down since yesterday. :-/
Thank you and sorry for the inconvenience.
Manfred
___
I'm trying to install the RxFax in Asterisk.
After much trouble getting app_rxfax.c(and friends) compiles and installed
into Asterisk (thanks to the many asterisk-users messages) it did get it
installed. I have been unable to receive a legible fax. app_rxfax
provides lots of debugging
I am having a problem with SpanDSP. What happens is when I send a fax
to SpanDSP the fax message seems to fail in the training phase. I think
it's a timing error, however I have no idea about how to rectify the
problem. I have included a copy of the log below. I am using a Digium
TDM-400P card
I am having a problem with SpanDSP. What happens is when I send a fax
to SpanDSP the fax message seems to fail in the training phase. I think
it's a timing error, however I have no idea about how to rectify the
problem. I have included a copy of the log below. I am using a Digium
TDM-400P card
Just a tip, not related to your problem:
when you call asterisk with -n, e.g. asterisk -vnc, then you won't get
color codes and your post wouldn't look like
[1;30;40m-- [0;37;40mStarting simple switch on 'Zap/3-1'
but instead be much cleaner:
-- Starting simple switch on
Hi all,
I've been struggling with SpanDSP all night and this morning. I've managed to finally
get it to compile but when I try to patch the Makefile in the apps directory I get:
Hunk #1 FAILED at 35.
Hunk #2 FAILED at 68.
2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej
[EMAIL
: [Asterisk-Users] SpanDSP Makefile.patch
Hi all,
I've been struggling with SpanDSP all night and this morning. I've
managed to finally get it to compile but when I try to patch the Makefile in
the apps directory I get:
Hunk #1 FAILED at 35.
Hunk #2 FAILED at 68.
2 out of 2 hunks FAILED
Hi Matt,
I had the same problem. The Makefile has changed a bit since that patch
was made. Try this one instead:
http://sremington.zapto.org/downloads/asterisk/spandsp/Makefile.patch
That one is made against June 17th CVS HEAD.
-Seth
On Mon, 2004-07-05 at 06:49, Matt wrote:
Hi all,
I've
- Original Message -
From: Seth Remington [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 05, 2004 1:59 PM
Subject: Re: [Asterisk-Users] SpanDSP Makefile.patch
Hi Matt,
I had the same problem. The Makefile has changed a bit since that patch
was made. Try this one instead:
http
]: Leaving directory `/usr/src/asterisk/apps'
make: *** [subdirs] Error 1
- Original Message -
From: Seth Remington [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 05, 2004 1:59 PM
Subject: Re: [Asterisk-Users] SpanDSP Makefile.patch
Hi Matt,
I had the same
Seth,
Forgive my ignorance (I'm kind of new to Linux) When you say #define
_GNU_SOURCE where should I put that?
matt
- Original Message -
From: Seth Remington [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 05, 2004 3:57 PM
Subject: Re: [Asterisk-Users] SpanDSP
Matt,
To answer your question: you can create a define at several different
steps in the programming/compilation process.
* In the source code with a #define directive
* At configure time through Autoconf, Automake, etc...
* At compile time with the -D option to gcc (or in the CFLAGS
: [Asterisk-Users] SpanDSP Makefile.patch
Matt,
To answer your question: you can create a define at several different
steps in the programming/compilation process.
* In the source code with a #define directive
* At configure time through Autoconf, Automake, etc...
* At compile time with the -D
If you're going to do it in the Makefile use -D_GNU_SOURCE. #define is
used in source files. You can also try compiling with make
CFLAGS='-D_GNU_SOURCE' instead.
-Seth
On Mon, 2004-07-05 at 11:58, Matt wrote:
Seth,
Thanks for that...When I compiled it the first time. I was in the
Seth,
Still no luck!
Exact same error.
Matt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Seth Remington
Sent: 05 July 2004 17:27
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] SpanDSP Makefile.patch
If you're going to do it in the Makefile use
Of Matt
Sent: 05 July 2004 18:18
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] SpanDSP Makefile.patch
Seth,
Still no luck!
Exact same error.
Matt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Seth Remington
Sent: 05 July 2004 17:27
To: [EMAIL
, then try adding '/usr/local/lib' to
your LD_LIBRARY_PATH env var before starting *.
Matt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt
Sent: 05 July 2004 18:18
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] SpanDSP Makefile.patch
Seth
Ryan!
You are a STAR!
Cheers
Matt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ryan Courtnage
Sent: 05 July 2004 14:01
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] SpanDSP Makefile.patch
On Monday 05 July 2004 18:56, Matt wrote:
Ok further
Hello, group:
I
install spandsp and the respective applications in my asterisk box running
Redhat 7.3. Rxfax received the fax but when I display on my application the
only thing I get is a long Black line in the midle of the page like the fax is
being shrink to one Black line. Has
Try opening it in firefox. Some browsers don't handle tiff right.
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
I tested SpanDSP as an internal extension, and it worked like a charm.
Now I am trying to receive faxes from a toll-free nufone DID. I am
running g.711uLaw in on this line, so no to cause too many problems.
However I receive the following errors after the fax is finished
receiving:
so the fax
Dear Steve
after a lot of compile from spanDSP first version to K and after i have
compile * HEAD and Stable i cant understand where im wrong...
- Mandrake 9.2
- libtiff3-3.5.7-11mdk
I have add Header from your FTP but the result is this error..
Can you give me your opinion?
Thanks in
On Wednesday 28 April 2004 17:10, Martin Christian Koch wrote:
Rxfax answers, makes handshake, and crashes once the page starts to send.
It receives a .tif file of 8 bytes.
I am *just* starting to play with this. I found out I had libtiff-3.5.7
hanging around on the system, but I had
Aaron J. Angel wrote:
Has anyone used spandsp with a patched libtiff 3.6.1 successfully?
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500
Of course not. That is why I keep telling people not to use it. :-)
Regards,
Steve
___
Asterisk-Users mailing
I had to go use 3.6.0 before it worked.
On Mon, 2004-05-31 at 03:08, Aaron J. Angel wrote:
Has anyone used spandsp with a patched libtiff 3.6.1 successfully?
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500
___
Asterisk-Users mailing list
]
Subject: Re: [Asterisk-Users] spandsp w/libtiff-3.6.1?
Aaron J. Angel wrote:
Has anyone used spandsp with a patched libtiff 3.6.1 successfully?
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500
Of course not. That is why I keep telling people not to use it. :-)
Regards,
Steve
30, 2004 1:59 AM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] spandsp wont compile.
Yes, success! I deleted the tiff libs I had and installed ver 3.6.0 and
was able to compile and load the application modules. Now I just have to
do some tweaking and t-shootin' in ext.conf. Thanks and a Shout
, 2004 1:53 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] spandsp w/libtiff-3.6.1?
Aaron J. Angel wrote:
Has anyone used spandsp with a patched libtiff 3.6.1 successfully?
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500
Of course not. That is why I keep telling people not to use
all the places where libtiff is on your
machine and remove the incorrect one..
-Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Vlok Stone
Sent: Saturday, May 29, 2004 6:09 AM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] spandsp
Has anyone
usedspandsp with a patched libtiff 3.6.1 successfully?
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=500
401 - 500 of 526 matches
Mail list logo
