cliveb wrote:
>
> Then I saw this in the default convert.conf file:
> >
Code:
> >
> flc flc transcode *
> # FT:{START=--skip=%t}U:{END=--until=%v}D:{RESAMPLE=-r %d}
> [flac] -dcs $START$ $END$ -- $FILE$ | [sox] -q -t wav - -t flac -C 0
$RESAMPLE$ -
>
BoxOfCables wrote:
> I meant to update that thread too...
>
> It turns out there is a quirk with that rule, if you seek to a point in
> a track it doesn't apply. I've found it quite a useful way of A/B
> testing the EQ settings - play a song (the filters are applied), then
> use the time contro
I meant to update that thread too...
It turns out there is a quirk with that rule, if you seek to a point in
a track it doesn't apply. I've found it quite a useful way of A/B
testing the EQ settings - play a song (the filters are applied), then
use the time control to scrub back to near the begi
vco1 wrote:
> I'm plaanning on going the same route: Hifiberry Digi2 (Pro) + DSP
> Add-on foor room correction. But your post confuses me a bit if it's
> working fine with Squeezeplayer or not. Especially since you mention
> "Also, their (experimental) room correction feature didn't work for me.
vco1 wrote:
> I'm plaanning on going the same route: Hifiberry Digi2 (Pro) + DSP
> Add-on foor room correction. But your post confuses me a bit if it's
> working fine with Squeezeplayer or not. Especially since you mention
> "Also, their (experimental) room correction feature didn't work for me.
cliveb wrote:
> I've long been vaguely interested in experimenting with DRC, but
> whenever I read about Inguz it looked a bit daunting. Added to that, my
> LMS runs on a Raspberry Pi 3, so there's no chance of doing the
> necessary processing at the server end.
>
> I seem to recall some discus
ralphy wrote:
> A hardware mixer might be obsured using plughw:
>
> I never use it as it "hides" the actual audio formats supported by the
> dac, which cripples many of the features that are built into
> squeezelite, like the resampler.
>
> Try
>
> squeezelite -o hw:CARD=Out -L
I'm afraid tha
adamdea wrote:
> >
Code:
> > volumiooem@minidsp-shd:/opt$ squeezelite -L
> Volume controls for default
>
> volumiooem@minidsp-shd:/opt$ squeezelite -l
> Output devices:
> null - Discard all samples (playback) or generate
zero sample
Code:
volumiooem@minidsp-shd:/opt$ squeezelite -L
Volume controls for default
volumiooem@minidsp-shd:/opt$ squeezelite -l
Output devices:
null - Discard all samples (playback) or generate
zero samples (ca
Thanks both i will have a go at adding /opt or wherever squeezelite is
to the path
adamdea's Profile: http://forums.slimdevices.com/member.php?userid=37603
View this thread: http://forums.slimdevices.com/showthread.php?t=1
Am 04.08.2021 um 14:13 schrieb ralphy:
It appears the squeezelite is not in your PATH and that's why the
command fails.
You can try running this command to try and locate it.
find / -name squeezelite
On my MiniDSP squeezelite is located in /opt. /opt isn't in the path, so
maybe thats the reas
It appears the squeezelite is not in your PATH and that's why the
command fails.
You can try running this command to try and locate it.
find / -name squeezelite
Mine returns
/usr/local/bin/squeezelite
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio
'Squeezebox client builds'
(http
@schoeppi @tw99 do you have any idea why I can't use the squeezelite
command, or otherise how to set up squeezelite under minidspshd to
control hardware vc
adamdea's Profile: http://forums.slimdevices.com/member.php?userid
This does not seem normal to me:
volumiooem@minidsp-shd:/$ squeezelite -L
-bash: squeezelite: command not found
volumiooem@minidsp-shd:/$
adamdea's Profile: http://forums.slimdevices.com/member.php?userid=37603
View this
ralphy wrote:
> You can list the mixers available for a device with squeezelite.
> You must specify the -o option with your card, *before the -L *on the
> command line, otherwise squeezelite listed the mixer device(s) for the
> default device.
>
> $ squeezelite -o hw:CARD=sndrpihifiberry -L
> V
You can list the mixers available for a device with squeezelite.
You must specify the -o option with your card otherwise squeezelite
listed the mixer devices for the default device.
$ squeezelite -o hw:CARD=sndrpihifiberry -L
Volume controls for hw:CARD=sndrpihifiberry
Analogue
Analogue Playback
Well I had a go last night: volumio does control the shd vc with its vc.
Otherwise I drew a complete blank. I tried changing the output device
from the drop down and simply inserting -V digital, none of the
permutations worked.
I tried SSH ing and running squeezelite -l but all I got was comman
paul- wrote:
> Only if there is a real alsa mixer. The the name of the mixer in the
> volume control line of the squeezelite settings.
How would i find out if there is? Any if there isn't could one be
installed by fiddlling with the volumio distro under which squeezelite
runs
Or to put it ano
Only if there is a real alsa mixer. The the name of the mixer in the
volume control line of the squeezelite settings.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&busine
So I have managed to get squeezelite running on the mini dsp and all
seems to be well. Well almost. The audo device settings only allow
eiether shad external outputs like s/pdif or a general alsa.
Is there a way of getting squeezelite to control volume via the shd
volume control rather than the
Thanks both
I have asked for credentials, been asked to acknowledge the "health
warning" and now waiting for details. Not sure when I will get the
chance to set up but will have a go.
I'm intrigued that you got latest version of squeezelite to work
@schoeppi and wonderign whether to try. But ner
Am 06.07.2021 um 23:52 schrieb tw99:
adamdea wrote:
Thanks Schoepp
I have recently purchased a mini- dsp SHD snd will have a go at
installing squeezelite
I was proposing to follow these instructions-
https://www.minidsp.com/forum/shd-series/17077-shd-and-logitech-media-server#47632
Are they cor
adamdea wrote:
> Thanks Schoepp
> I have recently purchased a mini- dsp SHD snd will have a go at
> installing squeezelite
> I was proposing to follow these instructions-
> https://www.minidsp.com/forum/shd-series/17077-shd-and-logitech-media-server#47632
> Are they correct or is these a bett
schoeppi wrote:
> Just for those who are looking for a non DIY solution and want to use
> LMS
> with players that can do room correction the easy way...
>
> 1. Get a MiniDSP device and activate the squeezelite client plugin. The
>
> plugin does not work out of the box but with a little linux
Just for those who are looking for a non DIY solution and want to use LMS
with players that can do room correction the easy way...
1. Get a MiniDSP device and activate the squeezelite client plugin. The
plugin does not work out of the box but with a little linux knowletge it is
possible to copy
I would suggest CamillaDSP since it supports both IIR and FIR filters
and has a pretty straightforward configuration. You can find binaries
for use on RPi on the CamillaDSP website
https://github.com/HEnquist/camilladsp/releases
and detailed setup instructions:
https://github.com/HEnquist/c
I've long been vaguely interested in experimenting with DRC, but
whenever I read about Inguz it looked a bit daunting. Added to that, my
LMS runs on a Raspberry Pi 3, so there's no chance of doing the
necessary processing at the server end.
I seem to recall some discussions here about whether th
27 matches
Mail list logo