Re: [Bacula-users] Backing Up a Remote Client

the data is encrypted but anyway it's set up now as you suggested so moot. -Chris- On Thu, 27 Jun 2024, 15:19 Bill Arlofski, wrote: > On 6/27/24 2:54 AM, Chris Wilkinson wrote: > > I made the additional changes you suggested. > > > > *Removed FD port open on remote ro

Re: [Bacula-users] Backing Up a Remote Client

, 26 Jun 2024, 22:50 Bill Arlofski, wrote: > On 6/26/24 3:31 PM, Chris Wilkinson wrote: > > > > Your tips were bang on. I implemented this and it is working. > > Excellent! \o/ > > > > The other steps required were to forward ports on the routers at each >

Re: [Bacula-users] Backing Up a Remote Client

Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 6/26/24 10:44 AM, Chris Wilkinson wrote: > > I'm seeking some advice on configuring the backup of a remote client. > > > > Up till now all clients were located on the same local lan that hosts > the Dire

Re: [Bacula-users] Backing Up a Remote Client

Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 6/26/24 10:44 AM, Chris Wilkinson wrote: > > I'm seeking some advice on configuring the backup of a remote client. > > > > Up till now all clients were located on the same local lan that

[Bacula-users] Backing Up a Remote Client

an SD. Appreciate any thoughts or suggestions you might have. TIA -Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Backup in disk AND tape

ive of the job being incr/diff/full. For "selection type=PoolUncopiedJobs" this is only a minor issue since already copied jobs are skipped. Chris On Tue, 9 Apr 2024, 15:12 Bill Arlofski, wrote: > On 4/9/24 6:53 AM, Chris Wilkinson wrote: > > Regarding the suggestion to put a Runa

Re: [Bacula-users] Backup in disk AND tape

Regarding the suggestion to put a Runafter block in the job to run the copy job at the end, that doesn't seem to be allowed. Run job=xx commands are not permitted in a Runscript as I just found out. It gives a not allowed command error. Perhaps there is another way to accomplish this? -Chris-

[Bacula-users] Error: cannot run a job from a RunScript

09:52 bsvr-dir JobId 0: run: is an invalid command." Is it not permissible to use a run command within a Runscript block? Many thanks Chris Wilkinson Job { Name = "catalog" Description = "Catalog" Type = "Backup" Level = "Full" Messages = &qu

Re: [Bacula-users] Copy Job Configuration Question

Thanks Bill, that's a good plan that I'll implement. Chris On Sat, 6 Apr 2024, 22:17 Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 4/6/24 10:53 AM, Chris Wilkinson wrote: > > I am attempting to write a copy job to copy uncopied jobs from one

[Bacula-users] Copy Job Configuration Question

ue? Schedule = "sched_none" SelectionPattern = "catalog" #copy only job names matching "catalog" SelectionType = "PoolUncopiedJobs" } Many Thanks Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] bvfs_clear_cache

I believe this is a bconsole command. -Chris- On Mon, 25 Mar 2024, 12:28 Adam Weremczuk, wrote: > Hi all, > > Bacula 9.6.7-3 (free version) > Baculum-web 9.6.6.3 > Debian 11 > > Every quarter or so I run "dbcheck -f -c /etc/bacula/bacula-dir.conf" > and each time I see this this: > > "Checking

Re: [Bacula-users] SD Hang - Only when using "cloud upload" command

I had a similar issue in v9.x. I added "cloud storage=cloud-sd allpools allfrompool upload" as a run after Console command in the cloud job resource. This seems to do the trick as I've not seen any orphaned volumes in the cache since. Chris On Wed, 6 Mar 2024, 18:53 K. M. Peterson, wrote: >

Re: [Bacula-users] Incr/Diff not backing up mv'd files

> file. > > > > Daniel > > > > > > > > Am Mo., 12. Feb. 2024 um 22:39 Uhr schrieb Chris Wilkinson < > > winstonia...@gmail.com>: > > > > > I don't have mtimeonly set. > > > > > > I mv'd a sample file in my home d

Re: [Bacula-users] Incr/Diff not backing up mv'd files

t;>> On Sun, 11 Feb 2024 09:17:10 +, Chris Wilkinson said: > > > > I'm seeing that files that are mv'd within the same folder are not being > > backed up by incr or diff backups. This is on Bacula v11, Debian 11. > > > > I'm guessing that this is because

Re: [Bacula-users] Incr/Diff not backing up mv'd files

; > Le 11 février 2024 10:17:10 GMT+01:00, Chris Wilkinson < > winstonia...@gmail.com> a écrit : > >> I'm seeing that files that are mv'd within the same folder are not being >> backed up by incr or diff backups. This is on Bacula v11, Debian 11. >> >>

[Bacula-users] Incr/Diff not backing up mv'd files

the files are still there in the last full and will get backed up in the next full. I'm just wondering if this is intended functionality or a mis-configuration on my part? Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https

Re: [Bacula-users] Cloudcache Issues

job to upload the cache again. This isn't always needed of course but serves as belt and braces. It doesn't seem to consume any resources most of the time since the S3 driver seems to check the sync state first and only upload the bad or missing data. -Chris Wilkinson On Tue, 16 Jan 2024, 21:19

Re: [Bacula-users] Where is the path to a Volume stored in the database?

ers@lists.sourceforge.net> wrote: > Hello Chris, > > I am replying back to the list to keep thread continuity. :) > > > > On 1/10/24 08:31, Chris Wilkinson wrote: > > Thanks Bill > > > > What i was trying to do was write a script to determine the disk space > used

[Bacula-users] Where is the path to a Volume stored in the database?

not used anymore and where is it now? [V11/Postgres] -Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Please help me to unblock my backup run

Does Dropbox have a file size upload limit? -Chris- On Mon, 4 Dec 2023, 22:23 MylesDearBusiness via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > > > Ok, here goes ... > > > root@c1:~# find / -path /mnt -prune -o -type f -print | grep "Vol-0" > root@c1:~# > > > root@c1:~# df -h

Re: [Bacula-users] Having difficulty mounting curlftpfs on bacula : "Device is BLOCKED waiting for mount of volume"

torage=cloud-sd allpools allfrompool upload" } Does that look sensible to you? Chris On Thu, 30 Nov 2023, 15:56 Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 11/30/23 03:29, Chris Wilkinson wrote: > > I use Backblaze B2. It is S3 complian

Re: [Bacula-users] Having difficulty mounting curlftpfs on bacula : "Device is BLOCKED waiting for mount of volume"

I use Backblaze B2. It is S3 compliant but about the lowest cost I could find, certainly a fraction of the price of AWS. It works mostly OK except for errors of the kind in the log below. The "no tomes" error is from B2 when there are no upload slots available temporarily. B2 says that the user

Re: [Bacula-users] Migration Job - Volume data deletion

eature requests towards Acronis before I moved on to Bacula, they > just couldn’t manage my NAS space the way I needed them too. Garbage > collection was certainly one of those bullet points. > > > > On Wed, Nov 29, 2023 at 7:03 AM, Chris Wilkinson > wrote: > > I have a s

Re: [Bacula-users] Migration Job - Volume data deletion

> > But I’d happy to adapt it to my conf. > > My mail address is open for sharing if you want. (zip, gz or even > wetransfer) > > > > Great thanks, > > Lionel > > > > *De :* Chris Wilkinson > *Envoyé :* mercredi 29 novembre 2023 13:03 > *À :* Lion

Re: [Bacula-users] Migration Job - Volume data deletion

I have a script that deletes physical disc and cloud volumes that are not present in the catalog, perhaps because a job was manually deleted or migrated. Is that what you want to achieve? It's part of a collection of Bacula scripts that I use. It's too big to post here but I'd be happy to share

Re: [Bacula-users] Compiling SD only

conf on the NAS. This is the bit I'm stuck on. Would anyone be able to share an example Director dir.conf and SD sd.conf for a remote SD? -Chris- On Sat, 11 Nov 2023, 14:08 Chris Wilkinson, wrote: > Thanks. I couldn't find one so you must be right. Is there a definitive > list of all the

Re: [Bacula-users] Compiling SD only

is specified. C. On Sat, 11 Nov 2023, 12:40 Radosław Korzeniewski, wrote: > Hello, > > sob., 11 lis 2023 o 12:08 Chris Wilkinson > napisał(a): > >> I would like to compile SD only on a NAS. I have compiled FD only in >> another context using the enable-cl

Re: [Bacula-users] Compiling SD only

Thanks. I couldn't find one so you must be right. Is there a definitive list of all the valid flags anywhere? I've never managed to find that either. -Chris- On Sat, 11 Nov 2023, 12:40 Radosław Korzeniewski, wrote: > Hello, > > sob., 11 lis 2023 o 12:08 Chris Wilkinson > napisa

[Bacula-users] Compiling SD only

I would like to compile SD only on a NAS. I have compiled FD only in another context using the enable-client-only flag but not sure if there is an equivalent SD flag. Could anyone advise what flag to use? Best -Chris Wilkinson ___ Bacula-users mailing

Re: [Bacula-users] Restoring Incremental Promotes to Full

ibed here: > > > https://gitlab.bacula.org/bacula-community-edition/bacula-community/-/issues/2500 > > Best regards, > Marcin Haba (gani) > > On Sat, 28 Oct 2023 at 01:26, Bill Arlofski via Bacula-users > wrote: > > > > On 10/27/23 16:17, Chris Wilkinson w

Re: [Bacula-users] Restoring Incremental Promotes to Full

Having looked at the job log from a Baculum restore I can see that it is going back to the last full and restoring full, diffs, incrs in order. Is it not possible to restore from a particular job alone in Baculum as is possible with bconsole? -Chris- On Fri, 27 Oct 2023, 23:09 Chris Wilkinson

Re: [Bacula-users] Restoring Incremental Promotes to Full

net> wrote: > Resending to list. Accidentally directly replied to Chris... > > > > On 10/27/23 14:46, Chris Wilkinson wrote: > > Till now I have only ever done restores of full backups using the > restore wizard of Baculum. When I did a restore of an > > Incremen

Re: [Bacula-users] Restoring Incremental Promotes to Full

o incremental. > > Robert Gerber > 402-237-8692 > r...@craeon.net > > On Fri, Oct 27, 2023, 3:47 PM Chris Wilkinson > wrote: > >> Till now I have only ever done restores of full backups using the restore >> wizard of Baculum. When I did a restore of an Incrementa

[Bacula-users] Restoring Incremental Promotes to Full

appropriate level, pool etc. from the job/level being restored but that isn't what actually happens. It looks like the restore is taking its' level from the restore job above. I have separate pools for each job and level. Do I need to define individual restore jobs for every job/level? Best Ch

Re: [Bacula-users] Extraction of a specific file

I seem to remember Marcin telling me that there is an optional FD directive that lists the files backed up in the job report. That might be quite a lot so probably why it's optional and defaults to no. -Chris- On Sat, 7 Oct 2023, 14:09 Radosław Korzeniewski, wrote: > Hello, > > sob., 30 wrz

Re: [Bacula-users] Slow spooling and hashing speed

FWIW, I also use SMB (CIFS v2) to backup to a cheapo DLINK DNS-325 NAS. I typically get ~30MB/s on a Gb local LAN for long jobs, maybe half that for shorter incremental. Compression is enabled. Like yours, the NAS is locked down so no chance to put the SD there. You might be lucky and find a

Re: [Bacula-users] Remote client connection refused

here in > your bacula-dir.conf file? If so, should correct it to the relevant fqdn. > > Robert Gerber > 402-237-8692 > r...@craeon.net <mailto:r...@craeon.net> > On Tue, Sep 19, 2023, 5:31 AM Chris Wilkinson <mailto:winstonia...@gmail.com>> wrote: > I have set

Re: [Bacula-users] Remote client connection refused

emon_Configur.html#16447 > > Good luck. > > Best regards, > Marcin Haba (gani) > > On Tue, 19 Sept 2023 at 11:33, Chris Wilkinson > wrote: > > > > I have set up a new remote client running FD only on Debian 12. The > client is on the same LAN as the DIR/S

[Bacula-users] Remote client connection refused

no errors. I suppose the FD needs to listen on any address but I can't see how to do that. Is there a bacula-fd.conf setting for this? Thanks Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net

Re: [Bacula-users] Debian FD v11 and above package

erything, > including findlib, built without a problem. > > > Regards, > Adolf. > > On 02/09/2023 10:21, Chris Wilkinson wrote: > > Thanks for confirming that. > > When compiling with --enable-client-only I get the following error from > make > > $ sudo bash make-client

Re: [Bacula-users] Debian FD v11 and above package

have two laptops and a desktop that are running with only an FD. > > Regards, > Adolf > > On 01/09/2023 22:54, Chris Wilkinson wrote: > > Bacula 9.x is also the latest version available through the Debian repo. > There doesn't seem to be a move to upgrade that to 11 or 13. That's

Re: [Bacula-users] Debian FD v11 and above package

obert Gerber > 402-237-8692 > r...@craeon.net > > On Fri, Sep 1, 2023, 3:17 PM Chris Wilkinson > wrote: > >> I hadn't spotted that there is a link on this page though it does say an >> email will be sent. That doesn't seem to be the case. I followed that >>

Re: [Bacula-users] Debian FD v11 and above package

umber, etc. > > It looks like bacula 13.x the newest debian version they support is > 11/bullseye. It should be fine to use that repo for your Debian 12 > system, but be sure to verify yourself just to be sure. > > Regards, > Robert Gerber > 402-237-8692 > r...@craeon

Re: [Bacula-users] Debian FD v11 and above package

-manuals/en/main/Installing_Bacula.html -Chris Wilkinson On Wed, 30 Aug 2023, 17:24 Chris Wilkinson, wrote: > Thank-you. I registered and am awaiting the registration email. > > -Chris- > > On Wed, 30 Aug 2023, 17:15 Rob Gerber, wrote: > >> I don't know about adding t

Re: [Bacula-users] Debian FD v11 and above package

on sourceforge for the fd alone. Do I >> need to compile it from source? >> >> If so, can anyone help with a script of the needed compile flags? >> >> Best >> -Chris Wilkinson >> ___ &

[Bacula-users] Debian FD v11 and above package

of the needed compile flags? Best -Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] baculabackupreport script error

Yes it is the one in the bacula packages. I'll give it a try. -Chris- On Wed, 28 Jun 2023, 18:34 Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 6/26/23 12:35, Chris Wilkinson wrote: > > I edited the script to uncomment my db pass

[Bacula-users] baculabackupreport script error

occurs. I am using bacula v11, psql. Perhaps my command line is incorrect? Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Baculum Restore Wizard Boxes are Empty

I answered my own question when I remembered an old post by Marcin on a similar issue. The answer there was to clear the bvfs cache with "clear_bvfs_cache yes" in bconsole. This had the desired effect. -Chris- On Fri, 26 May 2023, 20:45 Chris Wilkinson, wrote: > When I use the r

[Bacula-users] Baculum Restore Wizard Boxes are Empty

When I use the restore wizard and get to step 3 where the file selection boxes are, I get an empty path box at the top and empty boxes below with this message. "No file found for selected backup. It can mean file records for this backup are pruned. Restoring selected files is not available but if

[Bacula-users] Compilation and startup

to inhibit init.d startup? Regards Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Copy job clarification requested

a failure scenario, e.g. a storage fails, then it seems unlikely Bacula could be smart enough to do this. Am I being paranoid!? Chris On Thu, 18 May 2023, 4:45 pm Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 5/18/23 08:07, Chris Wilkinson wrote: > >

Re: [Bacula-users] Copy job clarification requested

Thank you Bill, a comprehensive reply as always . I'll need to study this some more. -Chris- On Thu, 18 May 2023, 16:45 Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 5/18/23 08:07, Chris Wilkinson wrote: > > I have not used a copy job before

[Bacula-users] Copy job clarification requested

need additional jobs for the diff/incr. Given that there is a 1:1 correspondence between a job definition and its pools, Bacula should be able to deduce one from the other but it seems to be required to specify both. Could anyone help me understand this? Chris Wilkinson

Re: [Bacula-users] Storage protocols advice sought

It is a DLink DNS-325 which locked down so no chance of putting the SD there. I guess I could reassign the SD uid:gid however that would upset some existing backups on local disks. Best -Chris- > On 10 May 2023, at 19:11, Phil Stracchino wrote: > > On 5/10/23 11:19, Chris Wilkin

Re: [Bacula-users] Storage protocols advice sought

create a new user on the NAS but I have no control over what UID:GID it chooses and will not be the same as the SD daemon user:group. I believe NFS v3 doesn't have the capability to map UIDs; that facility is v4 only. Has anyone found a workaround for this? Chris Wilkinson On Sun, 30 Apr 2023

[Bacula-users] Baculum Retention Time Units

. This also seems to apply to size specs where they are always saved in bytes. I'm using v11 and haven't looked at Bacularis yet. Regards Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists

Re: [Bacula-users] Storage protocols advice sought

depends on the protocol overhead. Thanks All -Chris- On Sun, 30 Apr 2023, 06:03 Dr. Thorsten Brandau, wrote: > > Bill Arlofski via Bacula-users schrieb am 30.04.23 um 01:04: > > On 4/29/23 16:33, Chris Wilkinson wrote: > > I am about to set up a NAS on a local lan as a stora

[Bacula-users] Storage protocols advice sought

if these any of these other options could be used and whether they might offer faster backups. Security is not a big concern as it will be on the local LAN only. Any advice/experience would be welcomed. Chris Wilkinson ___ Bacula-users mailing list Bacula-users

Re: [Bacula-users] Bacula Differential and Incremental Backup not working

One thing i’ve always found useful is to install Webmin and the Bacula module. It gives a quick overview of the config in GUI form and helps to spot config errors. One caveat is not to save any configs from it as it doesn’t respect the time units that are in the pool configs for retention times

Re: [Bacula-users] Nee Help for bacula storage S3 cloud configuration

I have the plugins dir set as /usr/lib which is why I mv'd it there. I could have set the dir as whatever the default driver make assumes also I suppose. -Chris- On Wed, 19 Apr 2023, 15:47 Bill Arlofski via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > On 4/18/23 12:

Re: [Bacula-users] Nee Help for bacula storage S3 cloud configuration

In my case the driver is installed in /usr/lib/ bacula-sd-cloud-driver-11.0.6.so I vaguely recall that the make file didn't put it there and I had to mv it. I forget now what the default is. -Chris- On Tue, 18 Apr 2023, 18:00 Davide F., wrote: > Hi, > > If I’m not wrong, I’m lutins should be

Re: [Bacula-users] Deleting Obsolete Volumes

ia table and hence is invisible to > 'query 14'. > > Why are you worried about deleting these empty volumes? There should be no > problem because they will never be used in a restore. > > __Martin > > > >>>>> On Thu, 13 Apr 2023 23:17:50 +0100, Chris Wilkinso

Re: [Bacula-users] Deleting Obsolete Volumes

Yes that is true. In the other cases I found, these were also zero file incr/diff jobs. However it appears that the job wrote a Volume as it appears in the list media result and there is such a Volume on disk but only 667 bytes so only the label I presume. I had expected that 'query 14' would

Re: [Bacula-users] Deleting Obsolete Volumes

-+--+---+--+--+---+ | 2,371 | archive-usb2 | 2023-04-13 17:42:39 | B| I |0 | 0 | T | +---+--+-----+--+---+--+--+---+ * Best -Chris- > On 13 Apr 2023, at 15:06, Bill Arlofski wrote: > > On 4/13/23 02:51

Re: [Bacula-users] Deleting Obsolete Volumes

This is the final mods to Bill's script. It scans the catalog for volumes without a job, deletes them from the catalog and disk. There were a lot of orphaned volumes and this recovered ~1TB from my storage. In my setup, all volumes are in one directory and therefore have unique names e.g.

Re: [Bacula-users] Deleting Obsolete Volumes

-users, < bacula-users@lists.sourceforge.net> wrote: > On 4/11/23 16:35, Chris Wilkinson wrote: > > I have some disk volumes that are not associated with any job but have > not yet reached their expiry time so they are not > > being pruned. These were created by a job run th

[Bacula-users] Deleting Obsolete Volumes

that is difficult to parse out. How could I list these obsolete volumes so I could script a delete from catalog and rm the volume files? Thanks Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists

Re: [Bacula-users] Truncate Volumes Before Retention Time is Up

n 3/30/23 06:40, Chris Wilkinson wrote: > > I have an old job that is no longer needed that is consuming some disk > > space that I'd like to recover. This storage for this job is on S3 cloud > > and the job has full/diff/incr pools associated. > > > > The full bac

[Bacula-users] Truncate Volumes Before Retention Time is Up

haven't been able to find bconsole commands that would do this. I tried the truncate command but the volumes status remains unchanged at full or used or append. Thanks for any suggestions. Chris Wilkinson ___ Bacula-users mailing list Bacula-users

[Bacula-users] S3 Cloud Upload Errors

script enabled me to automate this across all missing volumes which I'm happy to provide to anyone interested. Any ideas? Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula

Re: [Bacula-users] dbcheck, postgres, OOM...

I run Bacula+Postgres on a raspberry pi, 4 core, 8GB and have never tuned the database, just the default settings. The dbcheck works fine. I'm wondering now whether i should tune it or leave well alone? -Chris Wilkinson On Tue, 28 Feb 2023, 08:04 Eric Bollengier via Bacula-users, < bacula-us

Re: [Bacula-users] Troubles with AWS [Possibly solved]

d after waiting up to 30 seconds will result in a successful upload. Please let us know if there's anything further we can assist with." On Tue, 17 Jan 2023, 4:28 pm Chris Wilkinson, wrote: > Backblaze provides an integration checklist for developers. > > http

Re: [Bacula-users] Troubles with AWS [Possibly solved]

Backblaze provides an integration checklist for developers. https://www.backblaze.com/b2/docs/integration_checklist.html I’m wondering if anyone could comment on whether the S3 driver is compliant with this? I’ve asked the

Re: [Bacula-users] Troubles with AWS [Possibly solved]

I don't specify "max concurrent uploads" so it defaults to 3 per manual. I have differing max part size for the jobs but the ones that frequently fail are 500Mb. I'm bandwidth limited to 6MB/sec so I don't see any benefit from trying to run uploads concurrently. My largest backup is 350GB that

Re: [Bacula-users] Troubles with AWS

There's been a couple of threads on this topic recently and I posted a similar question late last year. I get this error sporadically and haven't found any resolution yet. I just rerun the job, delete the failed one and it usually works. The job log shows that the backup completed with error.

Re: [Bacula-users] Cloud s3 error

manually with a couple of bash scripts. Regards Chris Wilkinson On Fri, 6 Jan 2023, 10:30 am Ivan Villalba via Bacula-users, < bacula-users@lists.sourceforge.net> wrote: > Hi there, > > I'm getting errors on the jobs configured with cloud s3: > > 06-Jan 09:03 mainbackupserver

Re: [Bacula-users] OneDrive and Google Drive?

but adequate. Chris Wilkinson On Fri, 2 Dec 2022, 8:56 am Arno Lehmann, wrote: > Hi Ken, > > Am 01.12.2022 um 14:51 schrieb Ken Mandelberg: > > Will there ever be support for either OneDrive or Google Drive directly > > in the community edition? > > do you mean to back up

[Bacula-users] Occasional Cloud Upload Failure

uot; MaximumConcurrentJobs = 2 HeartbeatInterval = 300 } Device { Name = "B2Bucket" MediaType = "Cloud" DeviceType = "Cloud" ArchiveDevice = "/mnt/usb16tb/cache" RemovableMedia = no RandomAccess = yes AutomaticMount = yes LabelMedia = yes Al

Re: [Bacula-users] Backup volume creation permissions

can > list files in the directory. So read doesn't work without execute. > > On 2022-10-22 06:36, Chris Wilkinson wrote: > > My user is a member of the tape group but gets permission denied error > ls'ing the directory. The directory is 740 and the files within 640. I >

Re: [Bacula-users] Backup volume creation permissions

. It appears I need at least 750 or +x on the directory. Chris On Thu, 20 Oct 2022, 11:58 pm Bill Arlofski, wrote: > On 10/20/22 16:15, Chris Wilkinson wrote: > > Thanks for digging this out of the sources, I don't know Bacula well > enough to have done that. It seems a

Re: [Bacula-users] Backup volume creation permissions

ers@lists.sourceforge.net> wrote: > On 10/20/22 13:06, Chris Wilkinson wrote: > > I wonder if someone could enlighten me on what determines the > permissions that cloud backup local cache volume directories > > are created with. > > > > I'm seeing that new volumes are cre

[Bacula-users] Network errors uploading cloud part files

the S3 driver? Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] Backup volume creation permissions

Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Cloud storage and bacula 11

I have v11 working with Backblaze B2. Initially I had some failed backups that left some orphaned volumes on B2. I cleaned those up with a couple of bconsole scripts and since then it's been OK. I do see some retries=2 or 3 and occasionally some part files fail to upload necessitating a repeat and

[Bacula-users] Prune all volumes

. I need the prune command for this but it seems I have to specify the volume. Is there a prune option that will cycle through and prune all volumes? Regards Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https

Re: [Bacula-users] Default restore path in Baculum 11

lum/htdocs/protected/Web/Pages/RestoreWizard.page > > The restore path is in the Text property as below: > > Text="/tmp/restore" > > Potential upgrade will overwrite this change. > > Good luck. > > Best regards, > Marcin Haba (gani) > > On Thu, 15 Sept 2022 at

[Bacula-users] Default restore path in Baculum 11

The default restore-to path in the wizard is always /tmp/restore. Can I set the default to be something else or is that hard coded? I can adjust that on each restore but today I forgot and maxed out the / partition, crashing the machine. Regards Chris Wilkinson

Re: [Bacula-users] Truncating Cloud Volumes

t; defined for the volumes, but the purge command doesn't. Thus, I wouldn't use > the purge command to avoid data loss. > > Best regards, > Ana > > On Wed, Sep 14, 2022 at 6:22 PM Chris Wilkinson <mailto:winstonia...@gmail.com>> wrote: > I'm backing up to cloud

[Bacula-users] Truncating Cloud Volumes

in the cloud resource to empty the local cache after each part is uploaded. I'd like of course that storage (and cost) doesn't keep growing out of control and wonder if there is a config option(s) to ensure this doesn't happen. Any help or advice on this would be much apprec

Re: [Bacula-users] I am missing Debs for Buster 32 bit (for Raspberry Pi machines running RaspiOS)

I compiled v11/postgres for 64 bit Raspbian. Its working OK backing up to B2 cloud. I have a script for the compile if you need it. There shouldn't be any issue with v13. Regards Chris Wilkinson On Fri, 26 Aug 2022, 12:06 pm Justin Case, wrote: > Hello, this goes to the people who man

[Bacula-users] Truncating Cloud Cache After Failed Job

If a cloud backup job terminates abnormally, a bunch of cache volumes are left orphaned. What is the correct way to clean that up and recover the disk space? The bconsole command cloud, truncate only seems to be able to remove these one at a time. Chris Wilkinson

[Bacula-users] Cloud Cache Space Running Out

he Cloud. AtEndOfJob With this option[*note] , at the end of the Job, every part that has been uploaded to the Cloud will be removed (truncated). [*Not yet implemented] Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.s

Re: [Bacula-users] Community Cloud Backup on B2

all a custom libs3 prior to build but I'm unsure about that. Thanks Chris Wilkinson On Wed, 6 Jul 2022, 8:31 pm Chris Wilkinson, wrote: > That's very useful info, thanks. I'm not using a repo package so will have > to grapple with compilation. Nonetheless it will be a worthwhile exercise > to

Re: [Bacula-users] Community Cloud Backup on B2

That's very useful info, thanks. I'm not using a repo package so will have to grapple with compilation. Nonetheless it will be a worthwhile exercise to run through. Best Chris. On Wed, 6 Jul 2022, 8:17 pm , wrote: > On 2022-07-06 03:02, Chris Wilkinson wrote: > > Hello Radoslaw &g

Re: [Bacula-users] Community Cloud Backup on B2

I'll need to rebuild it. There seems to have been some issues with this for some people but I haven't been following this topic much. Best Chris On Wed, 6 Jul 2022, 10:42 am Radosław Korzeniewski, < rados...@korzeniewski.net> wrote: > Hello, > > śr., 6 lip 2022 o 10:14 Chris Wilki

[Bacula-users] Community Cloud Backup on B2

to me why a driver is even necessary since cloud storage can be mounted with rclone and treated just like a local disk. Is this just a performance issue? Regards Chris Wilkinson ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https

Re: [Bacula-users] Occasional zero size volumes on Google Drive

for the nudge. Regards Chris Wilkinson On Wed, 8 Jun 2022, 12:08 pm Martin Simmons, wrote: > >>>>> On Wed, 8 Jun 2022 09:14:59 +0100, Chris Wilkinson said: > > > > Occasionally I see the error below. > > 08-Jun 03:47 homeserver-sd JobId 6071: Error: Bacula can

[Bacula-users] Occasional zero size volumes on Google Drive

mpletes OK but with warnings. I've accumulated quite a few volumes marked as error in this way so periodically have to run a script to clean up the catalog and delete the unwanted volumes. Do other cloud-type storage users experience anything like this? Regards Chris

[Bacula-users] Baculum v9.6x Schedule Status Page

status is intended to show? Best -Chris Wilkinson- ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users

  1   2   3   >