Hi Erwan,
In your config for BR2 I see you have:
controller E1 0/2
clock source internal
pri-group timeslots 1-3,16 service mgcp
Howevever I don't see you binding this to CCM which is required for
MGCP, for example:
interface Serial0/2:15
isdn bind-l3 ccm-manager
If this is a back-to-back E
Thanks, Michael/Brett. This helps a lot. The sip.app is referenced a
couple of times in the first two mock labs.
On Sat, Oct 3, 2009 at 11:30 PM, Michael Ciarfello
wrote:
> Don't need it. I think a PG typo. According to the SRST SIP
> documentation it's for invoking an IVR type application,
This is an interesting scenario. Is this realistic - back-hauling a CME
PRI to CUCM?
On Sun, Oct 4, 2009 at 12:13 AM, Andrew Lythgoe wrote:
> Hi Erwan,
>
> In your config for BR2 I see you have:
>
> controller E1 0/2
> clock source internal
> pri-group timeslots 1-3,16 service mgcp
>
> Howev
It is question 5.12 in Lab 5 volume 1.
I have bind command and all Dial Peer configured, I will check the CCAPI output.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Sunday, 4 October 2009 5:27 PM
To: Kumar, Narinder; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Seemed if I
Hi all,
I bought CCIE Voice Blended Learning Solution one week before. I received just
DVD for VoD but I did not get the Hard disk. Is it normal? I tried also to
check under my account if there is Hard disk but I did not find.
Regards,
___
Make sure CSS (not rerouting CSS which is used for SNR) on the remote
destination profile has visibility of internal DN's partition as well as
PSTN route pattern partitions
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar,
Narinder
Just fixed it, had issues with one of the dialpeer , as this gateway was
earlier MGCP and I converted into H323 for MVA.
Thanks all for help.
From: Aamir Panjwani [mailto:aamir.panjw...@ivision.com.au]
Sent: Sunday, 4 October 2009 8:09 PM
To: Kumar, Narinder; Michael Ciarfello; OSL Group
Subject
I'm looking through the mock labs to find topics that weren't covered in
labs 1 & 2 (Presence and BACD, namely). I noticed a couple of things and
need a reality check;
- There's a problem in mock lab 5, it looks like it's combining lab 4 and 5
in the lab 5 pdf. Is it just me? (Other than that,
Hi,
After configuring UM, while i am dialing 5002 from 1002 only the extension 5002
is ringing and the virtual mobile number (PSTN line 2) is not ringing. Can
someone help me on this issue?
thanks and regards,
Venkat A.
___
For more inform
tks Andrew and Anil for help,
still failed. In CCM I choose VWIC-2MFT-E1 as shown in sh inv in BR-2
here , I attached my config and debug
1. show run
2. show version
3. show controllers
4. show isdn status
5. debug isdn q921
tks
--- On Sun, 10/4/09, Andrew Lythgoe wrot
hello,
i added the h323-gateway voip tech-prefix 1# command to the CME and was able
to call from HQ to br2 but i can not call from BR2 TO hq
Below is my gateway config
gatekeeper
zone local HQ ipexpert.com 10.10.200.3
zone prefix HQ 1... gw-priority 10 gk_trunk_2
zone prefix HQ 1... gw-priorit
the sender by reply e-mail and immediately destroy all copies
>> of the original message. Virus scanning is recommended on all email
>> attachments.
>>
>>
>>
>>
>>
>>
>> CONFIDENTIALITY - The information c
You need to prefix 1# ( your tech prefix) on dial-peer voice 900 voip. And
later strip the 1# on CCM if you are not doing significant digits 4
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ABIOLA ADEFILA
Sent: Monday, 5 October 2009 6:0
Make sure your redirect css have visibility to the PSTN i.e for testing assign
redirecting CSS which is completely open to everything.
Also the Mobile will only ring after default timer ( 19 sec I think) until N
unless you have adjusted this value.
Double check the settings in Remote destinatio
Convert it back to MGCP and practice the hairpinning mode also. I got it to
work by putting MVA on the MGCP router. Little tricky, but the SRND or F&S
guide gives great hints. Also practice it by putting MVA on a separate router
that runs H323, maybe PSTN-WAN router if you have your own equip
One (or more, I haven't done them all yet.) have BACD. (I'm pretty sure. The
lab I'm working on seems to imply it's looking for BACD. I just quickly read
the test and am working on other sections. I just put on my quick notes to
prepare for BACD. Looks like they snuck in some implied AAR wh
What tech prefix did the CCM server register as?
You have to strip off the tech prefix on CCM. Use a translation pattern or
significant digits.
There's a difference between a GATEWAY registering with a tech prefix, and
putting the tech prefix in the dial-peer which becomes part of the dialed
s
we endeavour to protect our network from computer viruses, UXC
Getronics Australia does not warrant that this email or any attachments are
free of viruses or any other defects or errors. It is the duty of the recipient
to virus scan and otherwise test any information contained in this email before
Someone just mentioned that BACD is on Vol 2 Lab 4 (which I'm getting ready
to do), I must have missed it when I reviewed the mock labs this morning.
I hope mock labs 6 - 10 more accurately reflect the material on the exam,
not that I mind spending training time on 40 things that won't be on the
l
The Lab 4 reference is solely because they have you exit CUE to an external
number and then queue the call. BACD is the only mechanism (barring a UCCX
/ CME implementation) to implement call queueing in IOS / CME. I won't
play spoiler, but they have you do BACD pretty extensively if you read
thr
That's good, I wanted to take some notes on BACD before boot camp plus lab 4
has Presence in it (which is not in labs 1,2, and 3 for some reason.) In
context, IPexpert did bang-up job getting the earlier mock labs (1, 2, and
3) out before the v3 exam had even started being administered. I can
ima
Thanks Michael, I did it and works fine.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Monday, 5 October 2009 11:14 AM
To: Kumar, Narinder; Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Convert it back to MGCP and practice the hairpinning mode also. I got it
So you configured MVA VXML script on a separate gateway or on the same
gateway where mgcp is configured?
From: Kumar, Narinder [mailto:narinder.ku...@uxcg.com.au]
Sent: Monday, 5 October 2009 2:44 PM
To: Michael Ciarfello; Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
It will work on both same gateway and also on separate gateway.
From: Aamir Panjwani [mailto:aamir.panjw...@ivision.com.au]
Sent: Monday, 5 October 2009 2:57 PM
To: Kumar, Narinder; Michael Ciarfello; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
So you configured MVA VXML script on a separ
Bingo. That was the one.
And they intentionally made you determine if you need to use it or not.
Customer's don't tell you "I want to do this, please use BACD and blah blah to
do it.". Great question.
I'm pissed becasue I ran out of time and didn't have a chance to set the VM
timer back to
Nara> And, honestly, if it's not on the blueprint I don't know how someone can
say that it might still be on the test.
Becasue there is a statement on the blueprint that says something to the effect
of and other relavent topics or technologies, etc. Actually here it is:
The blueprint is a deta
Hi Experts,
I've got a problem with MWI not lighting up on BR1 phone (SCCP) integrated
wtih Unity Connection when BR1 is in SRST.
Call from PSTN to BR1 phone, can reach the user's greeting as RDNIS is turned
on thru the MGCP gateway. Also, from the BR1 phone, pressing the voicemail
button can
MWI is not support in SRST mode J
However, BR2 MWI would work in SRST because CUE is local to the site
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of P N
Sent: Monday, 5 October 2009 4:56 PM
To: ccie_voice@onlinestudylist.com
Aamir,
Thanks for the prompt reply. I thought this limitation might have been overcome
in the new version 3 ??
If not, it must be a rumor...
Patrick
From: Aamir Panjwani
To: P N ; ccie_voice@onlinestudylist.com
Sent: Sunday, October 4, 2009 11:01:28 PM
Subj
Not that I am aware of atleast..
From: P N [mailto:png_sanj...@yahoo.com]
Sent: Monday, 5 October 2009 5:09 PM
To: Aamir Panjwani; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MWI issue with UC when BR1 in SRST
Aamir,
Thanks for the prompt reply. I thought this limita
> Oct 3 18:30:17.027: ////GK/gk_process: got a TIMER
> event
>
> Oct 3 18:30:17.027: ///xxxx/GK/gk_handle_timers
>
> Oct 3 18:30:17.027: ////GK/gk_handle_timers:
> managed timer expired 0x467BDFF8
>
>
31 matches
Mail list logo
