Re: [OSL | CCIE_Voice] SRST on BR2 not working

Since you already mentioned this is an H323 gateway, the commands which David mentioned really have no meaning and are only applicable in MGCP-controlled gateways. Is your SRST reference using the same IP address as is configured under "call-manager-fallback"? Also, after you added these refer

Re: [OSL | CCIE_Voice] CUC 7.02 (HTTP STATUS 500)

Hi, I usually get these kind of errors if the server (VM) is crying for memory... Have you checked how much memory the server is consuming? Have you also checked if the services are running trough the console? I believe the command is "utils service list" Met vriendelijke groet, With kind regar

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Just a quick one though, I have CME files on BR2 site since it was for CME site. But I beleive we can still run SRST on it since it is taking "call-manager-fallback " commands ??? On Mon, Feb 8, 2010 at 9:44 PM, David Wagner wrote: > Can you post the whole config? > > I asume you can ping the so

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Sorry Dave, I am away from lab now but can definately send it tomo when I lab again. My phones at BR2 site are in same subnet as fa0/0. voice on BR2 site so should be able to see it right On Mon, Feb 8, 2010 at 9:44 PM, David Wagner wrote: > Can you post the whole config? > > I asume you can

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Can you post the whole config? I asume you can ping the source interface you are using from the phones subnet? Dave On Feb 8, 2010, at 11:43 PM, vccie2010 wrote: > yes pls...I do have that. > > > > > On Mon, Feb 8, 2010 at 9:40 PM, David Wagner wrote: > Do you have > > Application > Glob

Re: [OSL | CCIE_Voice] SRST on BR2 not working

yes pls...I do have that. On Mon, Feb 8, 2010 at 9:40 PM, David Wagner wrote: > Do you have > > Application > Global > Service alternate default > > In the config ? > > Dave > On Feb 8, 2010, at 11:34 PM, vccie2010 wrote: > > Dave, > > Here is the SRST related config, do you need the coml

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Do you have Application Global Service alternate default In the config ? Dave On Feb 8, 2010, at 11:34 PM, vccie2010 wrote: > Dave, > > Here is the SRST related config, do you need the comlete GW configs pls... > > call-manager-fallback > max-conferences 8 gain -6 > trans

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Dave, Here is the SRST related config, do you need the comlete GW configs pls... call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-f

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Yes Dave , I tried with both SRST ref and Default GW in DP. I am running on 2811 router. the GW is configured as H323 on CCM c2800nm-adventerprisek9_ivs_li-mz.124-24.T2

Re: [OSL | CCIE_Voice] SRST on BR2 not working

Did you check your SRST reference in CUCM? Dave On Feb 8, 2010, at 11:08 PM, vccie2010 wrote: > Hi > > My BR2 site phones don't fall back to SRST. > > call-manager-fallback > max-conferences 8 gain -6 > transfer-system full-consult > ip source-address port 2000 > max-ephones 10 > max-d

[OSL | CCIE_Voice] SRST on BR2 not working

Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi r

[OSL | CCIE_Voice] Issues w. CUCM 7.1

Hi, All! I'm getting two strange effects implementing CUCM BE 7.1 at one of the customer's site. 1) After call pickup on callee's phone are not indicated pickuper's number/name as it should be - it looks like we are speaking to our initially called number. I didnt found any config parameter sp

[OSL | CCIE_Voice] Issues w. CUCM 7.1

Hi, All! I'm getting two strange effects implementing CUCM BE 7.1 at one of the customer's site. 1) After call pickup on callee's phone are not indicated pickuper's number/name as it should be - it looks like we are speaking to our initially called number. I didnt found any config parameter sp

Re: [OSL | CCIE_Voice] Dialing problem

Jonathan, CUCM and SCCP. Jeff From: Jonathan Charles [mailto:jonv...@gmail.com] Sent: Monday, February 08, 2010 4:32 PM To: Jeff Price (jeffpric) Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Dialing problem CME or CUCM? SIP or SCCP? If SIP, did you create a

Re: [OSL | CCIE_Voice] Dialing problem

CME or CUCM? SIP or SCCP? If SIP, did you create a SIP Dial Plan? Jonathan On Mon, Feb 8, 2010 at 5:28 PM, Jeff Price (jeffpric) wrote: > Hi everyone, > > > > I am having an issue with the dialing for my phones. All of my phones are > able to call across the PSTN, however it only works when

[OSL | CCIE_Voice] Dialing problem

Hi everyone, I am having an issue with the dialing for my phones. All of my phones are able to call across the PSTN, however it only works when I dial the digits and then press the "Dial" softkey. If I pick up the headset and dial that way I get a steady tone. Anyone familiar with this issue

Re: [OSL | CCIE_Voice] MGCP Gateway Problem

Now I am able to. I ran the utils dbreplication status command as well, which didn't report any issues. However, maybe this command had an issue as well. I'm just glad it's working now. From: jgar...@gmail.com [mailto:jgar...@gmail.com] On Behalf Of Jeff Garvas Sent: Monday, February 08, 2

Re: [OSL | CCIE_Voice] MGCP Gateway Problem

Jeff - you ARE able to make the calls? Sounds like you may have had some kind of replication issue going on between the pub/sub. -jeff On Mon, Feb 8, 2010 at 5:47 PM, Jeff Price (jeffpric) wrote: > Hi everyone, > > > > So after trying all of your suggestions, I guess the old Windows philosophy

Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues

Thanks Tyson - I will replace my 2621 which I cannot get 12.4.15 on and with a 831. I will let you know if I have continued problems after this is completed. Scott From: tsc...@ipexpert.com To: scarruthe...@hotmail.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com CC: wlaw...@ipexp

Re: [OSL | CCIE_Voice] MGCP Gateway Problem

Hi everyone, So after trying all of your suggestions, I guess the old Windows philosophy worked. After I restarted the PUB/SUB I am not able to make the calls. Thanks for all of your help. Jeff From: jgar...@gmail.com [mailto:jgar...@gmail.com] On Behalf Of Jeff Garvas Sent: Monday,

[OSL | CCIE_Voice] CUC 7.02 (HTTP STATUS 500)

I am getting the following error every time I go to the OS Administration page. But every thing is running fine and all other pages display fine. I have restarted the Tomcat service as well as bounced the box. I haven't found much on it expect to call tac. (VM install so I already know what they

Re: [OSL | CCIE_Voice] Manipulating IP Phone Called Number Display

Could it be that the predot on the Route Pattern is causing the RG-RL details not too much thus the reason to add 011 as a prefix on the dp. Have seen where manipulation on a H.323 gateway does show up on the phone. The exception is num-exp, i.e. num-exp 343214 9011323214 RP (9011.!, pr

Re: [OSL | CCIE_Voice] Manipulating IP Phone Called Number Display

Mark, The configuration was on proctorlabs gear and is now gone but I can easily summarize. Recap of goal - after user makes an international call the calling party's IP phone display should be updated and show 343214. HQ Phone > dials 9011343214 > hits route pattern 9011.! >

Re: [OSL | CCIE_Voice] Manipulating IP Phone Called Number Display

Can you give us your configuration with regards to the Route Pattern and Route List Details? The behavior you are experiencing isn't what I expect but rather what you expect is what I think I am thinking is correct, also. Mark Nigh From: scott carruthers [mailto:scarruthe...@hotmail.com] Sent

Re: [OSL | CCIE_Voice] MGCP Gateway Problem

Here is the link: http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_troubleshooting_guides_list.html In a nutshell, you will need to set the traces and trace level to either detailed for debug in unified serviceability. Then you can look at the trace in RTMT, you can do it from

Re: [OSL | CCIE_Voice] Number-type

Yes, if PSTN side don't match will get this error. On Tue, Feb 9, 2010 at 1:34 AM, Omotayo wrote: > Hello, > > Working on Vol 1 lab 5.4 > > i tried to configure nubering-typer subscriber under the dial-peer for the > local calls on the h323 gateway. > > but call failed with number type mismatch

Re: [OSL | CCIE_Voice] Manipulating IP Phone Called Number Display

Mark, No - there are no called party transforms. This is 100% traditional call routing. I do not have a single called party transform configured and this is intentional. So not a matter of the called party transform trumping. Thanks Scott From: mn...@netelligent.com To: scarruthe.

[OSL | CCIE_Voice] Number-type

Hello, Working on Vol 1 lab 5.4 i tried to configure nubering-typer subscriber under the dial-peer for the local calls on the h323 gateway. but call failed with number type mismatch i guess this is because of the configuration on the pstn gateway right? thanks _

[OSL | CCIE_Voice] SNR calling party No to PSTN

Hi Guys, When I dial from 2001 to 2003 (SNR enabled for this extn) . The call goes to PSTN for mobile connect as configured. The calling Party No displayed is 2001 instead of full External NO mask. I had a separate RP & partition for Mobility still the same issue . When I make direct call from

Re: [OSL | CCIE_Voice] MGCP Gateway Problem

Hi all, I'm fairly new to the RTMT tool. I'm looking around trying to find the correct area to be and what to select to monitor. Can someone point me in the right direction for this problem? Thanks. Jeff -Original Message- From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent

Re: [OSL | CCIE_Voice] Manipulating IP Phone Called Number Display

Scott, Called Xforms will trump all and match the called number at the point of it matching the route pattern. Do you still have your called xform configured? If so, you are matching on that thus changing the display of the phone. You mention "no transform in play", but wasn't sure if that mean

Re: [OSL | CCIE_Voice] New Workbook Lab Access

David - I've copies our support guys in this. They should have the additional labs added to your account shortly. Regards, Wayne A. Lawson II - CCIE #5244 Founder & President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert

[OSL | CCIE_Voice] New Workbook Lab Access

Have all the of the new labs been posted online? I am only able to see Volume 2 labs 1 - 4 when I login. TIA Dave ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues

Scott, You have to run IOS 12.4T. So we implemented some fVRF configuration at proctorlabs to make pod to pod transition for students easier. (Which in the future will allow you guys to save and load configurations if we finish working out the logistics of that). With this change though our

[OSL | CCIE_Voice] BW Calculation Question

I understand the calculation for ethernet / ppp / MLP / FR / ATM -- but what about a call that traverses multiple paths? What if a call between two voip phones traverses an FRF.8 ATM to F/R environment running MLPPP (with ethernet on each end). Do you simply consider the call's bandwidth to be t

Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues

I did not - I may have missed a note in these regards if one was sent out. Unfortunately I have been limping along (never had issues in V2) with less than recommended IOS due to hardware constraints. If I enter interface virtual-template1 I do not have a type tunnel option in the current IOS.

Re: [OSL | CCIE_Voice] unity connection 7.0 port group server ping time out

Kuan, I vaguely remember running into this issue, everything worked fine (both SCCP and SIP integration) but the server ping failed. Jeff. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kuanming Li Sent: Mon

Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues

Did you guys add the following to your configuration? interface Loopback0 ip address 10.10.100.15 255.255.255.255 ! interface Virtual-Template1 type tunnel ip unnumbered Loopback0 ! crypto ipsec client ezvpn IPx-Voice-vRack mode network-plus virtual-interface 1 Regards, T

[OSL | CCIE_Voice] Manipulating IP Phone Called Number Display

This is the goal: -From an HQ phone a call is placed to an international number -The DNIS is dialed as 9011343214 -The request is to allow the call to complete and after call completion the calling party's IP phone should be updated so that the access and international codes are

Re: [OSL | CCIE_Voice] MGCP Gateway Problem

Hi Scott, Even if you use MGCP, ie backhauled D-channel, you can see the output of "deb isdn q931" on the gateway. It will be locally echoed. Brgds, Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.se ___

Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues

Thanks Mike. I will email proctorlabs support and let you know what I get for a response. Has anyone else encountered similiar issues and been able to get resolution? As I said - I thought that proctorlabs/IP Expert were aware of Easy VPN issues but thought the problems were now rectified