Hi Ken,
>From a lab perspective, I didn't find any difference between SJ and
Brussels with respect to:
1. Speed
2. Ease of access
3. Proctors
The only difference was that the phones in SJ are mounted on wooden boards,
4 on one side and 4 on the other so you can simply reach out and test.
Phones
Hi Abel,
Sure here it is:
Class Map match-any RTP
Match access-group name RTP
And the ip access list:
Extended IP access list RTP
10 permit udp any any range 16384 32767
Rgs
Luk
From: Abel ... [mailto:midga...@gmail.com]
Sent: 05 November 2011 01:50
To: Nicolaers Luk
Cc: ccie_voice@onl
Hi Anthony,
I've tried that and IOS allows it, but the counters remain at 0.
When I only apply the voip policy to the frame-relay map-class then it works.
But when the voip policy is nested in the shape policy it doesn't.
Seems to be a nested policy -map issue…
Rgs
Luk
From: Anthony Alba [ma
This is an automated reply to your message "CCIE_Voice Digest, Vol 69, Issue
14" sent to stewart.mcfarl...@provista-uk.com.
Dear ccie_voice-requ...@onlinestudylist.com
Thank you for your email.
Please note that due to unforseen circumstances I will be out of the office for
the rest of this w
When you have a CUCM than you an TFTP-Server...
/Robert
Original-Nachricht
> Datum: Fri, 4 Nov 2011 10:57:33 -0700 (PDT)
> Von: John Smith
> An: "ccie_voice@onlinestudylist.com"
> Betreff: [OSL | CCIE_Voice] transfer file to router with no tftp or ftp
> server
> Forgive
HI Brain/All
My issue was actually my PSTN router.
My Serial interface connecting to my BR2 Gateway was missing
"isdn outgoing ie redirecting-number"
,Brian, thanks for pointing me in the right direction,
Kind regards
Stuart
From: Brian Mulgrew [mailto:btmulg...@gmail.com]
Sent: 04 November
In the case that you need to put IOS on a switch that is at the bootloader
prompt, you could use XMODEM and a console cable. The same goes for a
router at rommon if you can't use tftp.
On Sat, Nov 5, 2011 at 9:43 AM, wrote:
> When you have a CUCM than you an TFTP-Server...
>
> /Robert
>
Hi Kshitij,
I kinda disagree with you about Brussels... My first Lab attempt was there,
and I don't remember walking around to test my phones. They were right in
front of me, sitting on a L shaped desk. Everything was pretty comfy and
speed was all right. I can't say anything about SJ, because I'v
my outbound call to pstn works but inbound become busy... here is the debug
output below and the config.
b#
Nov 5 12:34:30.700: ISDN Se0/2/0:23 Q931: RX <- SETUP pd = 8 callref = 0x00D7
Sending Complete
Bearer Capability i = 0x8090A2
Standard = CCITT
Hi Everyone,
After 3 years of struggle i have cleared the voice lab and the journey is
completed.
I am very happy and cannot stop my tears when i have seen my result.
Slogged day/night for this respectful certification.
I am very happy today, After working in Dimension Data gold partner o
Hi Guys,
Im setting up a testbed on vmware workstation with CUCM 8.6 and CUPS 8.6.
Im using the windows domain controller as the NTP server. i have notice
once i went through the initialization wizard of CUPS automatically it
changes its NTP to CUCM publisher. But CUCM publisher is sync to externa
Well, just sharing my personal experience with Brussels coz that's what
happened. I got kinda lost while in the Metro and everyone I asked was
speaking in French. The people at the airport and Pizza Hut spoke English
as did most people at Grand Place. Paris was obviously not a problem at all.
So b
Dear All,
Can anyone please shine some light on my problem message below;
I have resync the JTAPI client a few times with the same result..
Cisco JTAPI Client
An error has occurred while trying to resynchronize the Cisco JTAPI Client.
Please try Cisco JTAPI Resync in Cisco Unified CCX
I believe this is a bug, does it work correctly if you continue or relaunch?
On Sat, Nov 5, 2011 at 2:47 PM, Duncan Hamilton-Walker <
dun...@rosethorn.plus.com> wrote:
> Dear All,
>
> ** **
>
> Can anyone please shine some light on my problem message below;
>
> I have resync the JTAPI c
I don't know yet as i have just finished building the server for the next
part of my studies.. but every time i launch the web interface and log in i
get the same.. ?
From: Bill Lake [mailto:whl...@gmail.com]
Sent: 05 November 2011 23:40
To: Duncan Hamilton-Walker
Cc: CCIE Study
Subject:
See if this helps.
http://www.onlinestudylist.com/archives/ccie_voice/2009-February/057713.html
Brian
- Reply message -
From: "Duncan Hamilton-Walker"
Date: Sat, Nov 5, 2011 7:21 pm
Subject: [OSL | CCIE_Voice] CUCM and UCCX - JTAPI issue
To: "'Bill Lake'"
Cc: "'CCIE Study'"
I don't
HI,
I have a weird problem. When I try to run the wizard from the web gui, it is
asking for web username and password.
I am putting in admin and cisco and I am getting an authentication error.
In my config I have admin/cisco as the web admin.
telephony-service
sdspfarm units 1
sdspfarm transc
A CCM publisher always runs an NTP server to provide time services to the
rest of the CCM cluster - this also extends to adjuncts like CUPS, which by
default (and non configurable as far as I know) pulls time from the cluster
publisher that it is integrated to.
-matthew
On Sat, Nov 5, 2011 at 9:2
i found the problem in a trace cucm... it says : cucm is rejecting the call
from the SB h323 gateway on port 1720.
when i took out the qos on the s0/0/0.211 interface it works with no problem
but when i put back the qos ,it doesnt work.. still looking at what is wrong
here.. confusing.
I setup t
hello guys,
regarding the h323 gw , why we need incoming called-number . under dial-peer ?
i saw vik create another dial-peer for match any inbound .
dial-peer voice 3000 voip
destination-pattern ^3...$
voice-class codec 1
voice-class h323 1
session target ipv4:192.168.10.211
incomi
This is to match inbound call coming from CUCM. Dial-peer 3000 voip
will be used to matched inbound voip calls as well as outbound voip
calls.
Inbound in terms to call coming from cucm to h323 GW and outbound in
terms of call coming from PSTN/GW to CUCM for inbound phone calls.
2011/11/6 bruno
21 matches
Mail list logo
