If the time difference is more than 15 min it will not sync.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186a008009470f.shtml
Here is a link to configure
Cheers!
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen
You could do an exact match on the VTP for the 322300 and let it pass
through unchanged. This would need to be the first rule in the set for
it to work, but I agree with Christian.
Cheers!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Christian
Narvaez
Sent: Sunday,
It is not possible to get the Annunciator to play to the outside world,
it must be done through Unity.
Cheers!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kapil
Atrish
Sent: Thursday, October 30, 2008 2:40 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL |
Reset the Huntlist the VM ports belong to. I will bet you it is not reg.
Cheers!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of jeremy co
Sent: Wednesday, October 29, 2008 3:06 PM
To: CCIE Voice Maillist
Subject: Re: [OSL | CCIE_Voice] Simple Problem: phone calls does
Not at all. That is what I do.
Cheers!
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sergio Polizer
Sent: Monday, October 27, 2008 6:18 PM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCM Signalling Port ACL
Does someone see any problem if we
Only if you are putting analog puts under MGCP control do you need the
POTS peer under service of MGCPAPP.
Cheers!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mo
Sent: Saturday, October 25, 2008 5:10 AM
To: [EMAIL PROTECTED]
Cc: ccie_voice@onlinestudylist.com
Subject:
You are correct. This feature only works with user/line.
Cheers!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jacob Owen
Sent: Tuesday, October 21, 2008 7:11 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Fwd: AC User Broadcast Hunting
All, I think
You would need to ensure that the Hardware transcoder is used first. Do
not have the software and hardware in the same MRG and the MRG with the
software must be listed below the hardware MRG
Cheers!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael
Shavrov
Sent:
Did you reload to application? Or just reload the router
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/
I have taken the exam in the last two months and the material is
relevant.
Cheers!
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/
Just to throw more confusion into the mix..Look on page 110 of the
CCM4.x SRND you will find more numbers and they are not the same as the
QOS SRND page 33. For the lab you are good going with the SRND #'s. You
may be given a +-10% factor in the lab ;) so you are good using the SRND
numbers
One of the best ways to ensure you have all the mandatory parameters is
to debug voice application script. Then run call application voice load
app name
Cheers!
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770
You would have to read the question that requires you to configure and
do what it says.
Cheers!
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 |
Any ideas on how you would satisfy a requirement for a blank system
message
I have tried the following
System message(return incomplete command)
System message (places double quotes)
System message \ (this will place just the single quote no back slash)
Cheers!
Mark Cardwell |
On the ephone keep-conference
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/
From: [EMAIL PROTECTED]
One otherway to do this is to create a CTI RoutePoint of 18XX forward all to
VM. On Unity create a call routing rule (Forwarding) of 18** and route to a
Call handler that plays what ever message you want it to play.
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked
What are you trying to accomplish? You could set it up as a H323 GW in
CM. Or as stated below a ICT non-GK controlled. I do believe in the SRND
it recommends the later. But either should work.
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive,
You can send different ANI even if the VTP is set on the voice-port. The
following would work
voice translation-rule 5
rule 1 /^\(3...\)$/ /331323\1/ on port
voice translation-rule 6
rule 1 /^\(3...\)$/ /323\1/ on local DP
voice translation-rule 7
rule 1 /^\(3...\)$/ /34331323\1/ on
No class based shaping is done with a default class policy-map and then
shape command under it.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul and
Bobs
Sent: Friday, September 05, 2008 10:18 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Class based
Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/
-Original Message-
From: Vik Malhi [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2008 4:58 PM
To: 'Turpin, Mark'; Cardwell, Mark; 'Michael Thompson'; 'Jonathan Charles
I will let you all know tomorrow after 5:15, sitting at San Jose in the
am.
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/
-Original
://www.presidio.com/
-Original Message-
From: Michael Thompson [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2008 1:14 AM
To: Cardwell, Mark; 'Jonathan Charles'; 'OSL CCIE Voice Lab Exam'
Subject: RE: [OSL | CCIE_Voice] Hardware failures at San Diego resolved?
PLEASE DO, I've heard multiple
I have experienced the same issue. I use the easy vpn and it worked
great until about 1-1.5 months ago and then no go, phones would never
resister.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Drew Lepla
Sent: Thursday, July 24, 2008 6:21 PM
To:
For lab route filters are not a solution. Due to the @ not being used
Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions
7601 Ora Glen Drive, Suite 100 Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED]
D: 571.225.0132 | http://www.presidio.com/
In the answer guide for task 37 I do not see where the second recording
is called in the script. Would like to know how the recording uploaded
in task 36 is called in the script
Cheers!
Mark Cardwell | System Engineer | Presidio Networked Solutions |
[EMAIL PROTECTED]| Cell: 571.225.0132 |
I do believe it is a system param. Transfer offnet enabled or something
like that.
Cheers!
Mark Cardwell | System Engineer | Presidio Networked Solutions |
[EMAIL PROTECTED]| Cell: 571.225.0132 | Office: 301.623.2000| FAX:
301.313.2400
From: [EMAIL
You may want to look at your inbound dp for 4500. The called # is 85x#4500 your
dp is 4500
--
Sent from Blackberry
Mark C Cardwell
Network Engineer
Presidio Corp
571.225.0132
From: [EMAIL PROTECTED]
To: OSL CCIE Voice Lab Exam
Neither the guide nor the video walk through address the 3rd bullet
point. This is the TOD aspect with routing of call to VM w/o a
forwarding device. Can you please provide answer for this (Mark or Vic)?
Also just wondering why in Lab 3 and 4 under 6608 gateway configuration
the IE channel
I just ordered the volume 3 and was told the same on the printed, but
the PDF's and proctor guide solutions are to be posted within three to
four days from purchase to your account. Also was told the updates to
vol 1 2 will be out soon
Cheers!
Mark Cardwell | System Engineer | Presidio
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_configuration
_examples_list.html
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/prod_configuratio
n_examples_list.html
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_configuration
_examples_list.html
Yes still a qos srnd
--
Sent from Blackberry
Mark C Cardwell
Network Engineer
Presidio Corp
571.225.0132
- Original Message -
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Sent: Mon Apr 28
You should know how to configure the port attached to a ata for trunking, it
may be asked of you on the lab. as long as both vlans are tagged with a dot1q
tag it will work.
--
Sent from Blackberry
Mark C Cardwell
Network Engineer
Presidio Corp
571.225.0132
Not complete
MGCP TCP 2428 missing
H323 slow start (1024-4999)
H323 fast start (11000 - 11999)
H323 TCP 1718 (GK unicast discovery) 1719 (RAS)
Cheers!
Mark Cardwell | System Engineer | Presidio Networked Solutions |
[EMAIL PROTECTED]| Cell: 571.225.0132 | Office:
33 matches
Mail list logo