No OEQ but lots of troubleshooting
IPExpert workbooks is the way to go
On Tue, May 11, 2010 at 5:37 PM, KatGuru wrote:
> Congrats !!! Please let us know if you had the OEQs in the lab.
>
> Thank you.
>
> --- On *Wed, 5/12/10, Omotayo * wrote:
>
>
> From: Omotayo
>
Hello All,
I had my exams in SAN JOSE yesterday and got the result this morning
It was my second attempt
Thanks all for answering all questions i posted and most especially IP
Expert, i attended the bootcamp two weeks ago.
Amy is a wonderful instructor during and after the training.
Regards
_
k with the proctor.
>
> Brian
>
> - Reply message -
> From: "Omotayo"
> Date: Sun, May 9, 2010 9:09 pm
> Subject: [OSL | CCIE_Voice] Frame relay traffic shaping
> To: "OSL Group"
>
>
> Hello all,
>
> If questions does not explici
Hello all,
If questions does not explicitly say we should configure shaping.
Do we have to on the physical interface?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
ns throughout the United States, Europe, South Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities <http://www.ipexpert.com/communities> and
> our
> public website at www.ipexpert.com <http://www.ipexpert.com/>
>
>
> On
online communities at
> www.ipexpert.com/communities <http://www.ipexpert.com/communities> and
> our
> public website at www.ipexpert.com <http://www.ipexpert.com/>
>
>
> On May 8, 2010, at 5:12 PM, Omotayo wrote:
>
> Hello,
> I have added it
> interface Vlan240
ur online communities at
> www.ipexpert.com/communities <http://www.ipexpert.com/communities> and
> our
> public website at www.ipexpert.com <http://www.ipexpert.com/>
>
>
> On May 8, 2010, at 3:31 PM, Omotayo wrote:
>
> Hello,
>
> bri router has been confi
Hello,
bri router has been configured as h323 gateway. call from the pstn to br1
phone are rejected with the following debug but calls to pstn phone are
completed
BR1-RTR#
BR1-RTR#
May 9 02:27:17.246: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref =
0x0085
Bearer Capability i = 0x8090A
Hello,
My PSTN phone for lab 8 vol 2 is not registering
Any one with similar issue
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
hello,
i bounced the config and applied back and it worked
Rgd
On Thu, May 6, 2010 at 6:22 PM, vccie2010 wrote:
> Will appreciate if you may please give ur to cents on what was the issue
> for the benefit...
>
> On Thu, May 6, 2010 at 5:25 PM, Omotayo wrote:
>
>> He
ents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
> 1. Re: Switch QoS - Vol.2 Lab 8 Q5.3 (Sergio Polizer)
> 2. Re: Switch QoS - Vol.2 Lab 8 Q5.3 (Mad Kiwi)
> 3. Cisco 837 for VPN to Proctors Lab (kerboute kerboute)
> 4. Lab 5c MVA (vccie2010)
&g
Hello All,
Never mind
Its working now
Rgd
On Thu, May 6, 2010 at 5:25 PM, Omotayo wrote:
> Hello,
>
> I have br1 registered as h323 gateway with music hold configured
>
> the MOH is assigned to br1 phones
>
> When br1 phone put pstn phone on hold
>
> the multicast
Hello,
I have br1 registered as h323 gateway with music hold configured
the MOH is assigned to br1 phones
When br1 phone put pstn phone on hold
the multicast is used but i dont hear the music
Anyone with an idea of what th eissue might be
Perf class (Cisco MOH Device) has instances and value
Hello All,
When i call the MVA number i get prompt for the pin no and press 1 to dail
After dialling the number . the call disconnects
Anyone with similar experience
Hoe do i fix this
thanks
___
For more information regarding industry leading CCIE La
Hello All,
working on Lab 7 volume 2
When hq pstn number call hq phones i get the following messages
Any one with a fix
NB: Call from other pstn number to hq phones works well
HQ-RTR(config)#
May 5 01:36:13.476: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref
= 0x8095
Cause i
Hello,
Does any one think there is something wrong with the PTSN Router.
UTC time is showing 22:13:23 UTC 2010 instead of 18:20 a the time of posting
On the hq router, it shows
HQ-RTR#sh clock
15:21:33.411 pst Mon May 3 2010
HQ-RTR#
while on hq phone it shows 18:22 22/03/2010
hq is pst -8
Any
outh Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities <*http://www.ipexpert.com/communities*> and
> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>
>
>
> --
> *From: *O
hello,
its ok now
missed the ip http path flash:/GUI cmd
thanks
On Wed, Apr 21, 2010 at 2:04 AM, Mad Kiwi wrote:
> Hi,
>
> What URL are you using ?
>
> http:///telephony_service.html or something else?
>
> Cheers,
>
> kiwi
>
> On Wed, Apr 21, 2010 at 10:5
Hello,
I usually have issue logging into the CUE via GUI.
When i supply the ip add of the loopback and the username and password
entered under the telephony-service i get Loin into callmanger as
administrator failed
When i use vlan 400, i get same result
below is my config
voice service voip
a
ver the cfur specific configuration,
>
> -Original Message-----
> From: Omotayo
> Date: Tue, 13 Apr 2010 11:04:59
> To: OSL Group
> Subject: [OSL | CCIE_Voice] Forward Unregistered in SRST
>
> ___
> For more information regar
Hello,
i have configured SRST FOR Br1 so that hq and br2 phones can call it when
unregistered from UCM( in SRST). i have the CSS as CSS-FUR with partition
pt-fur
i created a route pattern \+.1617! in pt-fur
i have the number +16178631002 assigned whenn unregistered
When i enable the SRST, it sh
ass codec from Incoming voip dial-peer and hardcode G729r8.
>
> Ash>
>
>
> On 10/04/2010 16:40, Omotayo wrote:
>
> am using g711 because of the GK with CUBE qquestion
>
> On Sat, Apr 10, 2010 at 12:34 AM, Ashar Siddiqui wrote:
>
>> Are you usig voice class codec
/04/2010 13:18, Amy Ryan wrote:
>
> Omotayo,
>
> When integrating CUCME and CUE it is best to use sip-notify vs. rtp-nte for
> dtmf configured on the dial-peer.
>
> dial-peer voice 3160 voip
>
> destination-pattern 3[16]00
> session protocol sipv2
> session
thanks,
i will check all this and have a feedback
On Fri, Apr 9, 2010 at 5:36 PM, Mike Peterson wrote:
>
> Omotayo,
>
> Amy you are right about " dtmf-relay sip-notify" but I think he also has
> something ls which doesn't match.
>
> The best practice i
s time you should
> get output in the debug. Check the debug to see that CUE now uses your MWI
> numbers.
>
>
>
> *Roger Källberg*
> Unified Communication Consultant
> Cygate AB
>
>
>
> *From:* Omotayo [mailto:adefilabi...@gmail.com]
> *Sent:* den 9 april
Hello,
I am working on volume 2 lab 1, when hq phone calls br2 phone and hq phone
leave a message on br2 phone, it gets to the voicemail but the MWI does not
turn. Any one with an idea of what could be the problem.
Below is the relevant config
dial-peer voice 3160 voip
destination-pattern 3[16]0
f-relay h245-alphanumeric
> codec g711ulaw
> no vad
>
> dial-peer voice 9 pots
> translation-profile incoming MVA
> service mva
> incoming called-number 3777
> no digit-strip
> direct-inward-dial
>
>
>
> On Wed, Apr 7, 2010 at 2:23 AM, Omotayo wrote:
You need to add
dial-peer voice 100 pots
incoming called-number .
direct-inward-dial
On Wed, Apr 7, 2010 at 7:12 AM, sean hurricane wrote:
> I have an h323 gateway provisioned in call manageri can successfully
> make outbound calls but inbound PSTN calls are not ringing the phone
> (tran
they advised you call from the pstn
On Sun, Mar 28, 2010 at 7:56 PM, James Key wrote:
> I think you are running into the same PL "mutlicast not working over
> VPN". It is been quite awhile since I have used the PL racks for voice, but
> remember they had a reccomended way for testing mutlicast
I dont know which lab. i only tried out Mike Brooks's question on my lab
You can check through all the labs to confirm
Regards
On Sun, Mar 28, 2010 at 5:12 PM, CCIETalk.com wrote:
> Trying to remember which lab was this?
>
> On 3/28/10, Omotayo wrote:
> > its ok no
its ok now
the conference resources was not registered before now
thanks
On Sun, Mar 28, 2010 at 7:08 AM, Omotayo wrote:
>
> Hello ,
>
> is the feature support of CIPC
>
> I configured it but when i pressed Cbarge while in In Use Remote, i get the
> message Failed to setup
Hello ,
is the feature support of CIPC
I configured it but when i pressed Cbarge while in In Use Remote, i get the
message Failed to setup barge
Rgd
On Wed, Mar 24, 2010 at 4:13 AM, Mike Brooks <2xcci...@gmail.com> wrote:
> Yes. Thanks Jason & Mark. I was missing the "conference hardware" com
yes i did
On Thu, Mar 25, 2010 at 4:22 AM, Otto Sanchez wrote:
> Hello,
>
> Did you also checked that:
>
> 1.- Sip trunk security profile has Accept Unsolicited Notification checked
> 2.- Some ports in UC are enabled to Send MWI Requests
>
> Thanks,
>
> On Mon, Mar
Hello Otto,
I checked the Redirecting Diversion Header Delivery - Inbound and Redirecting
Diversion Header Delivery - outbound
Voicemail works now but MWI is not working
what do i need to do to fix it
thanks
On Mon, Mar 22, 2010 at 10:56 AM, Omotayo wrote:
> Hello,
> That should
m/connection/7x/integration/cucm_sip/guide/cucintcucmsip050.html>Also,
>> make sure the Redirecting Diversion Header Delivery - Inbound is checked,
>>
>> hth,
>>
>> On Fri, Mar 19, 2010 at 1:35 PM, Omotayo wrote:
>>
>>> i have been able to get th
i have been able to get this work. i have checked all doc but no solution
I still need help on this
thanks
On Wed, Mar 17, 2010 at 3:29 PM, Omotayo wrote:
> Hello,
> Any ideas?
>
> On Wed, Mar 17, 2010 at 9:54 AM, Omotayo wrote:
>
>> Hello All,
>>
>> On Lab
rport sport
33555434 33554486 conf sendrecv g729192.168.3.1225860 18686
33555434 33554484 conf sendrecv g729192.168.3.1420442 18788
33555434 33554482 conf sendrecv g711u 192.168.3.1618172 17154
On Fri, Mar 19, 2010 at 12:34 AM, Omotayo wrote
Hello,
i set the in built bridge to On on the hq phone 2( phone that is barged
into). i get the Entance party tone and a message "you are not a valid
conference partipant"
i tried again i got the entrance party tone and message No Conference bridge
On Thu, Mar 18, 2010 at 11:02 A
Hello,
Just think it wont hurt to have an idea of what is going on
Thanks for the info
Regards
On Thu, Mar 18, 2010 at 2:49 PM, Marko Milivojevic wrote:
> On Thu, Mar 18, 2010 at 13:25, Omotayo wrote:
> > Hello,
> > is this information available online
>
> Not that I
Hello,
is this information available online
On Thu, Mar 18, 2010 at 2:20 PM, Marko Milivojevic wrote:
> On Thu, Mar 18, 2010 at 11:23, Mike Thompson
> wrote:
> > ??? When did that change take place?and why?
>
> It changed starting January 4th, if I recall. The way one of the
> proctors explained
Hello,
Has this 4 point OEQ been effected
On Thu, Mar 18, 2010 at 12:23 PM, Mike Thompson wrote:
> ??? When did that change take place?and why?
>
>
> Sent from my phone, apologies for any typos.
>
> On Mar 18, 2010, at 4:11 AM, Paul Kruger wrote:
>
> Hi Mike,
>
> While your logic seems ai
I always wonder if the guyz that wrote the PG looks through all this
concens. not just for this question but for all
They should help us with some of this issues as some of us trust that all
that is on the PG is what is needed, though i check config guides atimes
On Thu, Mar 18, 2010 at 3:17 AM, B
;
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Omotayo
>
> *Sent:* Wednesday, March 17, 2010 8:21 PM
> *To:* Peter Slow
> *Cc:* OSL Group
> *Subject:* Re: [OSL | CCIE_Voice] Lab 7 Question 3- DISA Dialling
>
>
>
yes i applied the mgl to the br2 device pool
On Wed, Mar 17, 2010 at 9:20 PM, Peter Slow wrote:
> do you mean device pool or MRGL? No CFB means CUCM couldnt select a
> CFB from the MRGL it was using for selection.
>
> -Peter
>
> On Wed, Mar 17, 2010 at 10:46 AM, Omotayo wrote
Hello,
i meant to say i put all the software conference brige in a device pool that
is not assigned to any user
thanks
On Wed, Mar 17, 2010 at 9:09 AM, Omotayo wrote:
> Hello All,
> Worked on Lab 7 question 3 - DISA daling. i had two issues with this
> section while working on it;
&g
Hello,
Any ideas?
On Wed, Mar 17, 2010 at 9:54 AM, Omotayo wrote:
> Hello All,
>
> On Lab 7, after integrating the UCM with the UC using SIP. Pressing the
> subscriber button, i get the personal greeting message
> But, when pstn or a local call dials hq phone 2 or br1 phone 2,
Any one with a fix on this?
On Wed, Mar 17, 2010 at 9:09 AM, Omotayo wrote:
> Hello All,
> Worked on Lab 7 question 3 - DISA daling. i had two issues with this
> section while working on it;
>
> Q3.3. i configured conference resources on the br2 gateway and applied to
> t
Hello All,
On Lab 7, after integrating the UCM with the UC using SIP. Pressing the
subscriber button, i get the personal greeting message
But, when pstn or a local call dials hq phone 2 or br1 phone 2, i hear Hello
Cisco unity connection messaging system from a text tone phone.
Any one
Hello All,
Worked on Lab 7 question 3 - DISA daling. i had two issues with this section
while working on it;
Q3.3. i configured conference resources on the br2 gateway and applied to
the BR2 Device pool. While the phone is "In Remote Use" . Also applied
CBarge on the BR2 phones.
On pressing the r
ch the codec between UCM trunk and incoming dial-peer on CME…then xcoder
> would engage on CME for the SIP phone. I have a hardware limitation in my
> home lab so I am not able to configure a xcoder on both UCM and CME
> simultaneously.
>
>
>
>
>
>
>
>
>
> *
or sip.
>
>
>
> Med venlig hilsen
>
> Flemming Ortvald
> Network System Eng.
> NetDesign A/S
> +45 4435 8346
>
> Tænk på miljøet inden udskrivning af denne e-post og tilknyttede
> vedhæftninger
>
>
> *From:* Omotayo [mailto:adefilabi...@gmail.com]
>
he wan right?, if that's the case, make
> sure the incoming dial-peer codec is set to g.729, in that case the
> transcoder at br2 shoud be invoked if the sip phone codec is set to g.711,
>
>
>
> On Fri, Mar 12, 2010 at 10:03 AM, Omotayo wrote:
>
>> Hello Otto,
>&g
access of your box.
>
>
>
> Thanks and Regards,
>
> Vishal Preenja
>
>
>
>
> --
>
> *From:* Omotayo [mailto:adefilabi...@gmail.com]
> *Sent:* Friday, March 12, 2010 12:33 PM
> *To:* Vishal Preenja
> *Cc:* ccie_voice@onlinestudylist
Hello Visha,
when i did it as you described.
when sccp phone call sip phone on the cme, i get a reorder tone
when sip phone on the cme calls the sccp phone on the hq, it disconnects
when hwq phone is picked and the sip phone continues to ring
How can this be fixed
On Fri, Mar 12, 2010 at 4:57 P
Hello Otto,
i had same issue
The transcoder can be on the trunk?
When i did the transcoder on the br2 router, i get a busy tone when the sip
phone is being called from the hq phone
REgards
On Fri, Mar 12, 2010 at 12:59 PM, Otto Sanchez wrote:
> Hi Jeff,
>
> Would you please tell us more abou
Hello all,
As anyone been able to get the SIP integration between Unity Connection and
Cme to work? I followed the Proctorlabs Guide
I posted this sometime lat week and revised as advised but keep getting a
reorder tone( Number Unknown) when the message button is pressed
Below is the relevant con
Hello,
i sed a 7941 sip phone instead of the xlite and all the calls worked
i guess we needed the xcoder because of xlite right?
On Thu, Mar 11, 2010 at 1:24 AM, Omotayo wrote:
> Hello,
> When i put the trunk in the hq DP and transcoder to the br2 router, all
> calls works
>
&
, Omotayo wrote:
>
> yes
> if not itwont register to the UCM
> Can the transcoder be configured on the br2 router??
> On Thu, Mar 11, 2010 at 12:54 AM, Berry, Matthew J. <
> mjbe...@krollontrack.com> wrote:
>
>> Have you issued a “no shut’ on dspfarm profi
yes
if not itwont register to the UCM
Can the transcoder be configured on the br2 router??
On Thu, Mar 11, 2010 at 12:54 AM, Berry, Matthew J. <
mjbe...@krollontrack.com> wrote:
> Have you issued a “no shut’ on dspfarm profile 1 transcode?
>
>
>
> *From:* Omotayo [mailto:a
The trunk DP has a region that speaks g729 to hq and br1
find attached the config
On Thu, Mar 11, 2010 at 12:24 AM, Berry, Matthew J. <
mjbe...@krollontrack.com> wrote:
> Omotayo,
>
>
>
> How do you have your regions setup in CUCM? The CUCME trunk through the HQ
> gat
Hello,
the debug shows that the codec getting to the cme is g711 because the codec
byte is 160 and still it disconnects
On Thu, Mar 11, 2010 at 12:03 AM, Omotayo wrote:
> Hello,
>
> When i call from hq sccp phone to cme sip phone, it rings but when i pick
> up. it disconnects
>
Hello,
When i call from hq sccp phone to cme sip phone, it rings but when i pick
up. it disconnects
also when i call from cme sip phone to hq (sccp and sip) phone it rings on
the hq phones when i pick t disconnects and contnues ringing on the sip
phone
i have a transcoder configured on the trunk
Hello,
I hope it start shipping.
Also i will like to confirm if those of us that bought the one recorded by
Mark Snow will get this too (CCIE Voice 3.0 Video on Demand Course &
Accompanying Slide and Topology Books)
On Wed, Mar 10, 2010 at 4:26 PM, Steve Sarrick wrote:
> Just curious if there a
Hello,
the questions says should use g711 within same region. Wont changing that
affect it
thanks
On Tue, Mar 9, 2010 at 10:36 AM, Angel Perez wrote:
> Hello:
>
> Your are probably hiting a well know bug, (I can't check the exact number
> know), but to solve this try the following:
>
> At ccm se
Hello All,
Am working on Lab 6 Volume 2
When i issue the commnads below in order to ensure that 16Kps is used for
calls between the UCM and CME for any particular call
bandwidth total zone UCM 128
the call fails but when i remove bandwidth session UCM 16. Calls go through
Anyone with an idea
Hello Scott,
What is BRQ??
Am having siimilar issue
how did you combat it.
thanks
On Wed, Jul 8, 2009 at 9:03 PM, Scott ODonnell wrote:
> I'm seeing something strange in making calls from CM to CME via GK.
>
> I've enabled the BRQ service parameter in CM.
> I've included "bandwidth total default
Working on Volume 2 lab 6. integrating the cme with the unity connection.
below is my config on the cme
when i press the message button on extn 3002. it gives a bust tone
Current configuration : 5763 bytes
!
! Last configuration change at 19:31:51 gmt Sat Mar 6 2010
! NVRAM config last updated a
Hi,
I have issues with the sip phone registering. it registers and keeps
deregistering and registering intermittently
On Thu, Mar 4, 2010 at 5:36 PM, wrote:
>
> Hi Guys,
>
> I was wondering if any one else had the same problem that I have with a SIP
> phone registered with CME
>
> CME version 7
add a voice-class codec list to your voip dial-peers that holds both
> g711 and g729.
>
> *Roger Källberg*
>
> ------
> *Från:* Omotayo [adefilabi...@gmail.com]
> *Skickat:* den 4 mars 2010 02:46
> *Till:* OSL Group
> *Ämne:* Re: [OSL | CCIE
a freeing 4A6B6B38
Mar 4 01:44:01.059: //-1//CCAPI/cc_free_feature_vsa:
Mar 4 01:44:01.059: vsacount in free is 0
On Thu, Mar 4, 2010 at 2:16 AM, Omotayo wrote:
> Hello,
>
> Am working on lab 6 of volume 2
> when i call from hq to br2, its gives your call can not be
Hello,
Am working on lab 6 of volume 2
when i call from hq to br2, its gives your call can not be configured as
dialled
calls from br2 to hq works
HQ-RTR#debug gatekeeper main 10
HQ-RTR#
Mar 4 01:10:08.527: ////GK/gk_process: got a TIMER
event
Mar 4 01:10:08.527: //x
:
> ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo
> Sent: Wednesday, March 03, 2010 7:19 AM
> To: Otto Sanchez
> Cc: OSL Group
> Subject: Re: [OSL | CCIE_Voice] Barge
>
> Hello Otto,
>
> I want to make few clarification.
>
> If i have a centralized ca
setting configured,
>
> On Sat, Feb 20, 2010 at 4:24 PM, Omotayo wrote:
>
>> Hello,
>> working on Volume 1 lab 8
>> IOS conference has been cnfigured on hq router
>> when i tried with question 8.1 i used hq phones as bri phone of the
>> question and vice
--
> Date: Tue, 2 Mar 2010 08:26:27 +0100
> From: adefilabi...@gmail.com
> To: ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] gatekeeper call to cme
>
>
> Hello,
>
> Anyone with a clue?
> Regards
>
> On Sat, Feb 27, 2010 at 10:33
Hello,
Anyone with a clue?
Regards
On Sat, Feb 27, 2010 at 10:33 PM, Omotayo wrote:
> Hello,
>
> working on Vol 1 lab 4
>
> Calls from hq and Bri to br2 works with all sccp phones
> with sip phone( i used xlite) at br2
>
> when the sip phone calls hq/br1
>
> Call
Hello,
working on Vol 1 lab 4
Calls from hq and Bri to br2 works with all sccp phones
with sip phone( i used xlite) at br2
when the sip phone calls hq/br1
Calls continues to ring on the sip phone while it disconnects on hq/br1
phone
when Hq/br1 calls sip phone
it rings on the sipphones but a
Hello,
Still on the BACD, when i dial 32143007 from PSTN or 3007 for internal
phones. i get the Unknown number tone
Kindly help check the config and see whatz missing
thanks
BR2-RTR#sh run
Building configuration...
Current configuration : 8096 bytes
!
! No configuration change since last restar
Hello,
Working on the BACD for volume 1 in my lab
i have the following. when i dial 1 i get the messgae "you have entered an
invalid entry"
when i dial 2 i get thereis no mail box associated with ths extension
Only dial0ng by extension and operator works
what could be the issue
voice service
Hello,
working on Volume 1 lab 8
IOS conference has been cnfigured on hq router
when i tried with question 8.1 i used hq phones as bri phone of the question
and vice versa
on pressing the button on br1 phone 2 when in In Use Remote, i still see the
barge softkey and it gives the message No Conferen
Hello,
Working on Vol 1 lab 5.4
i tried to configure nubering-typer subscriber under the dial-peer for the
local calls on the h323 gateway.
but call failed with number type mismatch
i guess this is because of the configuration on the pstn gateway right?
thanks
_
Hello,
Which is the new vol workbook and PG because i think i still have the former
in my memeber account
any one with the new ones??
On Sun, Jan 31, 2010 at 5:25 PM, Robert McGhee wrote:
> The new WB’s look very good, any idea when the solutions will be
> available as well?
>
>
>
> Thank you f
I can access it
its up
On Fri, Jan 29, 2010 at 2:10 PM, Arun Kumar wrote:
> Hi All,
>
> Is anyone else able to access ?
>
> I can't access web , no rack via telnet no vpn ?
>
> I can't access my session.
>
> Thanks
> Arun
>
> ___
> For more information
>
> Thank you.
>
> greg
>
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo
> Sent: Thursday, January 14, 2010 10:03 AM
> To: OSL Group
> Subject: [OSL | CCIE_Voice] UCCX clock set
Hello,
IN addition, the time on the control center is different from that on the
server time
thanks
On Thu, Jan 14, 2010 at 4:03 PM, Omotayo wrote:
> Hello,
>
> Am working on Lab 2
>
> how do i synchronize the uccx time to that of the callmanager or the
> ntp(10.10.100.2)
Hello,
Am working on Lab 2
how do i synchronize the uccx time to that of the callmanager or the
ntp(10.10.100.2)
thanks for the anticipated help
rgd
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hello All,
Am working on lab 4
i have integrated the UCM to CUE. Everything shows registered
end
CUE# show ccn status ccm-manager
JTAPI Subsystem is currently registered with Call Manager: 10.10.210.10
JTAPI Version: 7.0(1.1000) -1 Release
when i dial the pilot number 3600, i get a busy tone
wh
th 768
> ip address 10.10.112.1 255.255.255.0
> service-policy output 768kbps
> end
>
>
> Regards
>
> Graham Hopkins
>
>
>
> On 5 Jan 2010, at 09:23, Omotayo wrote:
>
> > Hello,
> >
> > i have configured MLP LFI between hq and br1 router. i reload
Hello,
i have configured MLP LFI between hq and br1 router. i reloaded the routers
but i can not ping across( this i can do prior to the configuration)
with show policy-map i have the following output
HQ-RTR#sh policy-map Interface Virtual-Access1
Virtual-Access1
Service-policy output: policy
The files available on the member account dont have the final config files
just the initials
On Tue, Nov 17, 2009 at 4:10 PM, Vik Malhi wrote:
> The final configuration files should not be used for any lab since we
> change labs and solutions more regularly than we can update final
> configurati
Hello,
for me i can call from HQ to br2 but can not call from br2 to hq
i always get a unknwn number tone
What do you think is missing
thanks
Below is the output when calling from br2 to hq
Also when i removed the bandwidth session 16, it goes through but you wont
hear the callers'seech and g
Hello,
Not to worry. i figured it out
i had a DLCI mismatch
On Thu, Dec 17, 2009 at 10:28 PM, Omotayo wrote:
> Hello,
>
> Working on Proctor lab. i need to configure MLP LFI between HQ and BR1 with
> link speed of 384kbps. I have configured but link wont come up
>
> i did a
Hello,
Also i can not ping across from HQ to 10.10.202.1
On Thu, Dec 17, 2009 at 10:28 PM, Omotayo wrote:
> Hello,
>
> Working on Proctor lab. i need to configure MLP LFI between HQ and BR1 with
> link speed of 384kbps. I have configured but link wont come up
>
> i did a shw
Hello,
Working on Proctor lab. i need to configure MLP LFI between HQ and BR1 with
link speed of 384kbps. I have configured but link wont come up
i did a shw ppp multilink but got
No active bundles
No inactive multilink interfaces
Dont know why this is.
Below are my configs
HQ-RTR#show frame-re
Hello,
I have the same experience with the hq pstn phone . if i use the other ones
like br1 or br2 pstn phone, it does not prompt me for the remote destination
number
On Thu, Dec 17, 2009 at 12:07 AM, Vccie Vccie wrote:
> OK, I have SNR working with MVA working but I just can’t figure out why th
Hello,
I use cisco 1811 router for my vpn connection but keep getting this on the
console and i can connect
EZVPN: User connect request ignored,tunnel IPx-Voice-vRack endpoint not
ready for request
Any one with similar experience and how was it resolved
thanks
__
Hello,
Working on the presence question.
i want to achieve desktop control, i added the phone to be controlled under
the CtiGw on the callmanager and enabled the enduser on the Presence for
desktop contol.
After doing this phone can not dial and you cant call the phones, same
applies to the cupc
Hello,
the Mobility works because you have attached the owner id to the phone and
the feature is not available on the device profile used during extension
mobility
am bothered about similar issues when phones at hq logs in at branch 1, they
cant make calls as they used to because the device pool
Hello,
i can not access the proctorlabs and ipexpert site.
Anyone with imilar experience or is it my connection?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hello,
After the integration of the presence server to the callmanager. using the
cupc client as a desktop control for hq phone 2
i encountered the following issues
1. the CUPC does not show the domain name entered in the presence server on
the phone. it just displays the extension
2. i modifie
nes are
> unable to resolve the name to an IP.
>
> On Wed, Dec 9, 2009 at 7:30 PM, Omotayo wrote:
>
>> Hello,
>>
>> I have subscribed a phone to the contact center agent service
>>
>> when i click on the service button on the phone, i get the
1 - 100 of 215 matches
Mail list logo