t;
> I did above, but still same error
>
> K
>
> From: Randall Crumm
> To: Karen Johnson
> Cc: "ccie_voice@onlinestudylist.com"
> Sent: Wednesday, July 17, 2013 6:34:48 PM
> Subject: Re: [OSL | CCIE_Voice] IPPM service failed
>
> Does the user
Does the user have CTI control over all the phones?
On Jul 17, 2013, at 4:40 PM, Karen Johnson wrote:
> folks,
>
> i got strange issue in my IPPM service.
>
> I verified using "System troubleshoot" in CUPS all looks good and i have
> config as per cisco doc. Also the url is verified correct
I suggest Ipexpert especially since you are asking on this distribution list
Don't you think?
Randall
Sent from my iPad
On Jul 16, 2013, at 7:53 PM, aman sinha wrote:
> Hi All,
>
> I have my Lab setup done and have started practicing.
> On technical side, I have 24 hrs Lab access, so i can p
I think I had issues with that setup too. Take a look at the pstn router config
and check it for any errors
Randall
Sent from my iPad
On Jun 25, 2013, at 7:40 PM, Todd Carswell wrote:
> Hi, Everyone!
>
> I'm working on Tasks 4.4 - 4.6 of Lab #2 in the Five-Lab Self-Study
> Challenge. The i
I dont think she tried to register on CUCM
Have a great day!
Thanks,
Randall
From: Bill Lake
To: Karen Johnson
Cc: Randall Crumm ; Pavan K ;
"ccie_voice@onlinestudylist.com"
Sent: Thursday, June 13, 2013 10:46 AM
Subject: Re: [OSL | CCIE_Vo
e] Phone not pick up TFTP or config from UCM
Karen,
Check if your phone has an ITL/CTL installed. Erase them and see if the changes
take affect
Do you see the phone as registered in UCM ?
On Jun 12, 2013 5:23 PM, "Randall Crumm" wrote:
Did you try to auto register the phones
Did you try to auto register the phones?
Have a great day!
Thanks,
Randall
From: Karen Johnson
To: Bill Lake
Cc: "ccie_voice@onlinestudylist.com"
Sent: Wednesday, June 12, 2013 1:18 PM
Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config fr
try to auto register the phones as opposed to already having a config in CUCM
Have a great day!
Thanks,
Randall
From: Karen Johnson
To: Randall Crumm ; "ccie_voice@onlinestudylist.com"
Sent: Wednesday, June 12, 2013 10:51 AM
Subject
Wan Qos on one side?
Have a great day!
Thanks,
Randall
From: Karen Johnson
To: "ccie_voice@onlinestudylist.com"
Sent: Wednesday, June 12, 2013 9:29 AM
Subject: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM
hi all,
Phones are gettin
HI,
I have a home lab for sale
26xxXM router - configured with VPN to Proctor Labs
3550 switch
7961 phones X2
7960 phone x1
7965 phone X1
7070 phones X2
power bricks x2
Private email if you are interested
Have a great day!
Thanks,
Randall
___
Your written is valid for 3 years period.You can go to VUE and get a score
report sent to you. You need this information to register for your lab.
You need to take your 1st attempt within 18 months of passing your written and
then the next one within 12 months of the first one.
Have a great da
Hi,
I have a router, POE switch and phones for sale. Everything is configured and
works with Proctorlabs PODS VPN access. This is what I used to pass my lab.
PM me if you are interested.
Router 26xxXM
Switch 35xx POE
phones
7960 x 1 for PSTN
7961 x 2
7965 x 1
7070 x2
Have a great day!
Th
;thank youkrishna.
>>>
>>>
>>>
>>>
>>> From: Rrcrumm
>>>To: William Bell
>>>Cc: Online Study
>>>Sent: Wednesday, October 17, 2012 2:03 PM
>>>Subject: Re: [OSL | CCIE_Voice] Meet Me q
Hello,
I am working on a CME Meet-me question(See below) My question is how do I
restrict SCPH2 from iniatiating the MEET ME conference?
Question:
SITE CPh1 can initiate the meet me conference The other users can call the meet
me number and get connected to the conference. PSTN can also acce
ritten
Leslie
From:ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
Sent: Thursday, October 11, 2012 9:20 AM
To: Online Study
Subject: [OSL | CCIE_Voice] CCIE Written expiration question
Hi,
I have a question about my written CCIE test. I unde
Hi,
I have a question about my written CCIE test. I understand you have to take
your first lab attempt within 18 months and the next one 12 months afterwards.
I have done that.
My question is there a cap at 3 years where no matter how many times I have
taken the lab, do I need to take the writt
Hello,
I have never seen this before.
I configured the servers under the phone system and can ping the servers. Then
I configured the servers under port group and when I ping the servers I get a
time out.
I reset the group, even deleted and created it again. same result.
Any thoughts?
H
Hi,
If you are taking your test in the next two weeks and would like
to collaborate send me an uni-cast email.
I am taking mine next week as well.
Have a great day!
Thanks,
Randall
___
For more information regarding industry leading CCIE Lab trainin
Hi Steven,
Are you saying the UCCX script makes reference to the "callerinq" field somehow?
Have a great day!
Thanks,
Randall
From: Steven Sarrick (ssarrick)
To: Randall Crumm ; Online Study
Sent: Friday, September 28, 2012 12:42 PM
Subject
Hello,
I was working the new 5 labs lab 1. It asks to modify the screen for an UCCX
agent to see the number of calls in queue. The custom field that needs to be
created, per the DSG, is "callinq"
I looked in the admin guide and could not find this only the others listed
already.
Does anyone kn
Hello,
I have a question. What is the rule about using "" when configuring a value in
a step?
Sometimes I see words in the DSG with "" around them and I want to make sure I
understand it.
It seems to me there are used to configure something that is not a variable or
is a reference back tho the
Thanks Bill,
That what i was suppose to do. I just didn't have the example .aef file. I saw
that on the other labs.
Have a great day!
Thanks,
Randall
From: William Bell
To: Randall Crumm
Cc: Online Study
Sent: Sunday, September 23, 2012 8:
Hello,
1. I am trying to get music-on-hold to work when the caller is in queue.
I am able to make the ringback work.
Any suggestions? I looked at the DSG and it does not seem to address the MOH in
queue.
2. It also says to play the in queue prompt every 15 seconds, and if the call
is in qu
I did not see the mgcp bind control and media statements.
mgcp bind control source-interface lo0 (for example using loopback0)
mgcp bind media source-interface lo0
Have a great day!
Thanks,
Randall
From: darshan
To: ccie_voice@onlinestudylist.com
Sent:
Hello experts,
I have some questions on WAN QoS.
1. If not explicitly not told to TRUST, is it better to use trust or not?
2. If using FRF.12 and told do use compression, does it matter if it is on the
WAN DLCI or the policy map? Always in the policy map?
2A If told to use class-based compres
Hi,
I can't remember where I looked before, but where can I find calculations or
info for WAN QoS for 10ms, 20ms and 30 ms
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you
Hi,
What debug command can I use to see ephone's having issues registering to the
SRST GW?
Thanks,
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looki
Hello,
If not specified, which interface is it better to configure as the option 150
IP address in the DHCP pool for CME phones?
Thanks,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are
Hello,
I set up phoneview for cme as per the document on proctorlabs. I was able to
test and import the 2 phones, but I cannot control either? I see x4001 and 4002
on the banner but I have +442077964001 and 2 respectively.
Any thoughts?
Cheers,
Randall
___
William and everyone,
I have the voice BLS and the new 5 lab pack.
Froom my expierence, let me just say the new labs are great and are worth the
money!!! Every penny.
I would recommend to to you and everyone, to buy them. They have many new tasks
that are really focused on what you really need
Hello,
When I call sc ph2 from another site I am getting dead air once it drops to VM.
If I press the messages button from sc ph2 I hear the correct greeting.
CUCM -- CUE intergration
I see the CTI port on the screen of the calling phone.
Any thoughts?
Cheers,
Randall
You should try to start the server from the PL page first.
Then open an in-session ticket and they will answer.
You sent this to the email list. They don't monitor this DL.
Cheers,
Randall
From: Krishna
To: Online Study
Sent: Tuesday, August 14, 2012 3:32
Good call. I did add g729r8 in the MTP and not in the transcoder.
5 points!
Cheers,
Randall
From: Bruno Nonogaki
To: Randall Crumm
Cc: Online Study
Sent: Sunday, August 12, 2012 5:13 PM
Subject: Re: [OSL | CCIE_Voice] CUE - New Labs Lab 2
If you
The difference I can see between the sights is RSVP CAC between SA and SC. The
is no CAC between SB and SC.
Probably not the issue, but I am not sure while I am scratching my head.
Cheers,
Randall
From: Randall Crumm
To: Online Study
Sent: Sunday
I set up cue at SC it works from SB and SC , but when I call from SA I get a
fast busy after 10 seconds, which is the fwd noan setting.
Any thoughts?
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
. Does CUPS
>have the correct hostname for CUCM?
>>
>>--Jeff
>>
>>
>>From:ccie_voice-boun...@onlinestudylist.com
>>[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
>>Sent: Sunday, August 12, 2012 10:10 AM
>>To: O
Hello,
Here is the error on the CUPS server from the CUCM Publisher page.
Sync Completed, but currently failed to connect to the CUCM Database Monitor.
Retrying... 2012-08-12 13:37:17
I reset the AXL username and pw. It connects wit the credentials.
It seems like the hostname is not correct.
Hello,
I am working on lab 2 and the presence server is having an issue which I
believe is related to being a VM.
The problem I am having is on the SYSTEM\CUCM Publisher menu. The servers sync
but failing to conect to the CUCM database.
Here is the error:
Sync Completed, but currently failed to
Hello,
How do I download a .wav file (userd for MOH) from CUCM?
I am trying to tftp the file down using tftpd32 but it always says file and
hostname firleds are required.
I did fill out the fields
Something is wrong.
Any help on tftpd32 or something else?
Thanks,
Thanks,
Cheers,
Randall
__
Hello,
I have noticed some different behaviors and was wondering what you recommend
If the question asks for plan unknown and type unknown
should you set to
1. plan unknown and type unknown or
2. plan isdn type unknown or
3. plan call manager type call manager
For me I have tried the above and
This seems like a dumb question...
If the hq rtr has a subinterface with "native" in it don't we have to have to
have a native statement on the switch port with the trunk to hq?
for example..
hq
interface fa 0/0.101
encapsulation dot1q 101 native
ip address 10.10.100.1 255.255.255.0
and the
Hello,
I am working on PL but with my equipment. I want to make the phones here go
into SRST. SO I need to add an access-list, my hoe phone being IP address
192.168.12.12
So I added this
ip access-list extended sc
deny ip host 192.168.12.12 host 10.10.210.11
deny ip host 192.168.12.12 host
Hello,
I recorded a greeting on a call handler. Then went to download it to my
computer, but the download menu item is grayed out.
How can I download a greeting file(.wav) then upload it to UCCX
Thanks,
Cheers,
Randall
___
For more information regard
Is that a valid number? looks like it is missing a digit and is it a local call
since you are stripping the 1
or should the 1 be sent?
Cheers,
Randall
From: donny f
To: ccie_voice@onlinestudylist.com
Sent: Wednesday, July 4, 2012 11:37 AM
Subject: [OSL | C
looking at it over I think it was i did not include:
voice service voip
allow-connections h323 to sip
etc
etc
etc
Cheers,
Randall
From: Vik Malhi
To: Randall Crumm
Cc: Online Study
Sent: Saturday, June 9, 2012 8:42 PM
Subject: Re: [OSL | CCIE_Voice] 5
Hi,
I am starting up again.
I am trying to leave a message for branch 2 user. Branch 2 has CUE.
I configured CTI PR, CTI ports,VM pilot,applied VM pilot to br2ph2 line.
configured transcoder on br2 gw, registered br2 transcoder to CUCM. applied
transcoder to a MRG
When I call from br1 I get a
Hi Wayne,
I was in Ken's class tonight and I have to say I think this is awesome ! Way to
go.
Tonight, the first night, we talked lab strategy and went over hq switch VLAN
config and QoS
I know from my lab experience, that this would have helped me out.I can't wait
for the other 7 classes.
I a
HI,
I am working on MGCP TS.
What is the best way to capture the output in the putty session or console?
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and
" and threshold 4 specifies the 3rd threshold for the
queue in question.
thanks,
/Baktha
--
>
>Message: 2
>Date: Sun, 19 Feb 2012 11:15:30 -0800 (PST)
>From: Randall Crumm
>To: Online Study
>Subject: [OSL | CCIE_Voice] New l
ndall
From: George Goglidze
To: Randall Crumm
Cc: Online Study
Sent: Sunday, February 19, 2012 1:39 PM
Subject: Re: [OSL | CCIE_Voice] New lab #2 - 3750 Qos
I don't know where you got the table that you are referencing below... But you
can never set
T3, from the auto qos, why move it to T1. I would say keeping it in T3 is
easier (see below).
OB queueQueue 2T1T2T3 MAX
mls qos queue-set output 2 threshold 506075 100
Any thoughts experts?
Cheers,
Randall
From: Randall Crumm
To: Online Study
Sent
lol
You mean load up some more. I have to wake up at 5AM since I am on the west
coast.
Cheers,
Randall
From: romain mullier
To: Randall Crumm
Cc: Online Study
Sent: Sunday, February 19, 2012 11:09 AM
Subject: Re: [OSL | CCIE_Voice] BACD issue new labs
HI,
I have a question on Qos
1. The question wants COS 3 i n the 2nd egress queue, 3rd threshold and COS 5
in the 1st egress queue 3rd threshold.
This is done after running auto qos on the phone switchport. No question
2. COS 5 traffic sent to SA-GW(queue set 2) should be dropped if queue is 75
Thank you Brian and Baktha
That was it.
I appreciate it gentlemen
Cheers,
Randall
From: Brian Valentine
To: Randall Crumm
Cc: Online Study
Sent: Sunday, February 19, 2012 10:48 AM
Subject: Re: [OSL | CCIE_Voice] BACD issue new labs #2
In dial-peer
Hi I am trying to call x4000 and have BACD forward to ephone-hunt list.
When i call 4001 it works. When I call 4000 I get a busy signal .
Any thoughts are appreciated.
application
service app-b-acd-aa
param voice-mail 4600
paramspace english index 1
param max-time-call-retry 700
param s
HI,
I want to use a script editor local to my machine not the one on the UCCX box.
I am able to log into the web page for the uccs sever at 10.10.210.5.
Shouldn't I be able to download the editor from the UCCX server, 10.10.210.5
and log in with the same credentials I used as in logging in to
Hi,
How can I open a script when I am not logged into on of the PL pods?
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
ww
HI,
I recorded a closed prompt. I am able to find it and save it anywhere.
My issues is in my script I have a play prompt step and when I use reactive
debug it the prompt is not playing. I getting the error "I'm sorry we
are experiencing system issues..."
My question is does it matter where I s
HI,
I know the steps I need to do but I am unsure of the prompts I need to record.
Please let know what I need to record.
I believe I need to record:
1. The number of people ahead of you is
2. zero
3. one
Please let me know
Cheers,
Randall
___
For
Hi,
Does anyone have a solution for the UCCX script portion? I do not see it in the
download and it is not in the DSG.
Thanks
Cheers,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you
Hi,
In the scripts solution it has a decrement step. Can someone explain why this
is needed, if it is?
Thanks,
Cheers,
Randall ___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCI
for the help gents
Cheers,
Randall
From: Edgar Feliz
To: Ken Wyan
Cc: Randall Crumm ; Online Study
Sent: Sunday, February 5, 2012 8:55 AM
Subject: Re: [OSL | CCIE_Voice] UCCX scripts
OOPs!! Sorry Randall I gave you option to copy Vic's scripts t
Thanks
LOL
Of course I wasn't just thinking about a share. I was thinking TFTP to CUCM,
download...
Cheers,
Randall
From: Ken Wyan
To: Randall Crumm
Cc: Online Study
Sent: Sunday, February 5, 2012 8:29 AM
Subject: Re: [OSL | CCIE_Voice] UCCX sc
HI,
How can I copy the icd script to my computer from the proctor labs pod?
Thanks,
Cheers,
Randall ___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Che
Did you actually read the thread?
One guys says he bought the lab, but can't crack it.
First, where do you buy one lab?
second, if you bought it why would you need to crack it
This is BS
Cheers,
Randall
From: Wong Misk
To: Methew Ch ; "ccie_voice@onlinest
Cheers,
Randall
- Forwarded Message -
From: Randall Crumm
To: Online Study
Sent: Sunday, January 29, 2012 11:10 AM
Subject: [OSL | CCIE_Voice] Solutions for UCCX scripts - .aef files
HI,
Does anyone know a way to view the solution scripts provided if you are not
connected to a
HI,
Does anyone know a way to view the solution scripts provided if you are not
connected to a POD or home lab?
I am looking for a "viewer"
Cheers,
Randall ___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpe
From: William Affeldt
To: Randall Crumm
Cc: Online Study
Sent: Sunday, January 22, 2012 12:03 PM
Subject: Re: [OSL | CCIE_Voice] UCCX prompt recording
Script
Create document variable
Just name the document.
Accept step
Record. Step
Point record step
You need to have support link your sessions, otherwise you will be disconnected.
Cheers,
Randall
From: Jeferson Guardia
To: OSL Voice
Sent: Saturday, January 28, 2012 5:29 PM
Subject: [OSL | CCIE_Voice] Fwd: general doubt 2 sessions straight
Does anyon
HI,
You need to add a css on the voicemail ports that will see the SA local route
plan. earlier in the lab you created a RL with sb as a backup so it should work
as asked without anything else.
Cheers,
Randall
From: Jurassic Labs
To: ccie_voice@onlinestudyl
Thanks
Is there already a script to record created or do we need to create it?
How do you record in UC?
Cheers,
Randall
From: Jamil Ahmed
To: Randall Crumm ; Online Study
Sent: Sunday, January 22, 2012 11:52 AM
Subject: Re: [OSL | CCIE_Voice] UCCX prompt
HI,
How are people recording custom prompts?
Thanks
Randall ___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
You can use translations rules or isdn maps on the voice interface
Cheers,
Randall
From: datucha123 datucha123
To: ccie_voice@onlinestudylist.com
Sent: Saturday, January 21, 2012 12:09 PM
Subject: [OSL | CCIE_Voice] Type and Plan on H323
Hello,
H323 Rou
Maybe another way to ask is it looks like it is hitting
the _bacd_options_menu.au which is already recorded.
So I guess we would have to have the cli config to make the options menu if
asked?
Any thoughts?
Randall
From: Randall Crumm
To: Online Study
HI,
I have configured BACD on my sc-rtr. It does work but, I do not know how to
control the greetings.
When I dial 02077353000 i get Thank you for calling. This is excpected.
Then I am getting
for sales press 1
for Customer Service press 2
to dial by extension press 3
for operator press 0
Here
HI
My CUE is sayiong INIT instead of online after activating the voiceview service.
Besides reload is there other commands to bring it online?
Thanks,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexp
Last I heard was soon.
The labs are very challenging and offer alot more from volume 2. They are well
worth the money.
Randall
From: Jurassic Labs
To: ccie_voice@onlinestudylist.com
Sent: Saturday, January 7, 2012 5:22 PM
Subject: [OSL | CCIE_Voice] Five-La
This is working now. I am not sure but some 30-40 minutes later it is working
rc
From: Randall Crumm
To: Online Study
Sent: Saturday, January 7, 2012 1:02 PM
Subject: [OSL | CCIE_Voice] CUE MWI issue
Hi,
I have CUE with CME. I have configured MWi for
HI,
I am having an issue with voiceview and CUE w/ CME.
My phone is not learning the service URL's?
I have reset it, but don't know what else I can do.
Any thoughts?
thanks,
Randall
___
For more information regarding industry leading CCIE Lab trainin
Hi,
I have CUE with CME. I have configured MWi for subscribe notify.
According to the DSG my config looks correct.
When I do debug ccsip messages I see:
Messages-Waiting: yes
Message-Account: sip:4002@10.10.115.2
But the MWI on the phone is not working.
Any thoughts
I have done the followin
Sorry meant to sent to support
From: Randall Crumm
To: Online Study
Sent: Wednesday, January 4, 2012 9:09 PM
Subject: please link sessions tomorrow
Thanks,
Randall___
For more information regarding industry
Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
gt;>
>>>Sent from my iPhone
>>>
>>>On Jan 4, 2012, at 11:53 AM, datucha123 datucha123
>>>wrote:
>>>
>>>
>>>Verify that CUE can reach the NTP IP Address. and the CUE module has the
>>>default gateway set
>>>>
&
HI,
I am working on the new lab #2.
When configuring CUE the question asks for the primary NTP server to be
10.10.110.3. The default is lo1, 10.10.115.1
When I enter that IP address, I get an error :
I could not reach 10.10.110.3 using NTP.
If 10.10.110.3 really is an NTP server, then
there
HI,
I am using a HW solution with PL pods.
I cannot register my CUPC to CUCM. Has anyone else had this problem?
Thanks,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCI
Hi,
I understand if you need to preserve features you need to configure
telephony-service. Also if you need learned DN's. If not, call-manager-fallback
works.
Can some people list some features that would require telephony-service?
Thanks,
Randall___
ompressing or
> roughly when the "Image text-base:... " part of the banner begins. You are
> then prompted to reset the router to factory default (erase start-up
> configuration).
> Hope this helps --ms
>
> Michael Sears
>
>
>
>
> -- next part
That did not work
From: linuxboss.9
To: Randall Crumm
Cc: Online Study
Sent: Friday, December 30, 2011 3:33 PM
Subject: Re: [OSL | CCIE_Voice] CUE wizard authentication issue
Try removing "ip http authentication local"
On Fri, Dec 30, 2011
HI,
I have getting an authentication error when starting the CUE wizard, "Login to
Call Manager Express as Administrator failed. Check you Call Manager Express
configuration"
I am using the username and password from the statement "web admin system name
admin password cisco" not the CUE admin us
Hi,
Can someone explain the command, "mls qos srr-queue input bandwidth 4 4: a
little and an example of having one queue with twice as much bandwidth as the
oterh queue (or something like that).
Thanks,
Randall___
For more information regarding indu
Sorry TFTP is failing
From: Rrcrumm
To: Ccie
Sent: Tuesday, December 27, 2011 11:32 AM
Subject: [OSL | CCIE_Voice] Presence soft phone
Hi
I am having issues getting the CUPC soft client working. I have a hw solution
to PL. I am working on wb2 lab 4 and can
HI,
I have an issue with my CUE. I have the configuration on the SC rtr (see below).
When I enter ser ser 0/0 ses I just get blank ...
I hit ctl+alt+6 x and get back to the sc rtr cli
If I hit enter again I get :
SiteC-RTR#
[Resuming connection 1 to 10.10.115.1 ... ]
This is blank space...
inte
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Thanks Edgar we all appreciate it.
randall
From: Edgar Feliz
To: ccie_voice@onlinestudylist.com; Larry Stern
Sent: Sunday, November 27, 2011 9:12 AM
Subject: [OSL | CCIE_Voice] 5 New labs what to watch for!!!
Guys I have been working on the new (5) labs mo
HI,
I am working on the New Lab 1 UCCX portion. I am suppose to add an UCCX
extension to each user page, but the field to add the UCCX exntension is not
there. I also did not see a "rmjtapi" user in CUCM. This is the user in the
intergration page on UCCX.
Any thoughts?
Randall
HI,
How do I look at this?
admin:utils dbreplication sta
admin:utils dbreplication status
This command reads and writes database information from all machines and will
take quite some time...pleas
Thanks Mark!
The real question is why is a question like this in the CCIE Voice lab in the
first place.
Randall
From: Mark Reed
To: Peter Jeff
Cc: Ken Wyan ; "ccie_voice@onlinestudylist.com"
Sent: Tuesday, November 22, 2011 3:22 AM
Subject: Re: [OSL | CCIE_Voice] lab - 6
The answer i
Do you have the locations in your Device pool and the proper device pool
assigned to the GW?
RC
From: datucha123 datucha123
To: Randall Crumm
Cc: "ccie_voice@onlinestudylist.com"
Sent: Sunday, November 20, 2011 10:00 AM
Subject: Re: [OSL | CCIE_
Is the setting set to mandatory under location in CUCM?
Randall
From: datucha123 datucha123
To: ccie_voice@onlinestudylist.com
Sent: Sunday, November 20, 2011 8:29 AM
Subject: [OSL | CCIE_Voice] QoS for Frame Relay
hello, everyone.
I have several quest
If you are using SLRG check to make sure you have Standard Local RG in the RL and assigned the Local GW to the DPrandallFrom: Chris Martin To: Voiper Cc: Rrcrumm ; "ccie_voice@onlinestudylist.com" ; "kew...@gmail.com" Sent: Tuesday, November 15, 2011 12:11 PMSubject: Re: [OSL | CCIE_Voice] Why my o
1 - 100 of 242 matches
Mail list logo