It looks like you are missing the toll fraud prevention. Try the commands
below.
Voice service VoIP
Allow connections h323 to sip
Allow connections sip to h322
Allow connections sip to sip
Allow connections h323 to h323
Sent from my iPhone
On Sep 19, 2012, at 5:42 AM, Chrysostomos Christ
Hey Experts,
I am having an issue with CME to CM presence. The CME can see the CM presence
but the CM can't see the CME presence. It never even send the message to CM.
The debug presence and important config is below. Any help would be greatly
appreciated.
Sep 15 05:27:43.141: //PRESENCE:[0]
5 or greater should be fine.
Sent from my iPhone
On Sep 10, 2012, at 2:09 PM, otunola Akerele wrote:
> hi guys, am using the proctor lab and the hq-rtr ios is Version 12.4(15)T8
> and not giving me version 7 while trying to register with the cucm. will
> the sccp register??
> _
Check the hunt pilot. What partition is it in?
Sent from my iPhone
On Sep 4, 2012, at 8:03 AM, Pavan K wrote:
> UCM 8.6.2 / Unity Connection 8.6.2
>
> Is there a way to prevent users from dialing the Voicemail pilot directly ?
>
>
> I tried the following but it doesn't work
> (1) Place the
I noticed you were missing the static route pointing to the service module.
Also, make sure you have a default gateway on the service module pointing to
the IP unnumbered interface. Finally if the ip unnumbered interface is a loop
back make sure it has the ip ospf network point to point command
I had the same issue yesterday. It only happened on the CCM though not CME.
Sent from my iPhone
On Jun 8, 2012, at 10:51 AM, "Dan Quinlan (daquinla)"
wrote:
> All,
>
> The past two times I've used ProctorLabs for rack time, I've seen my local
> (local to me) IP Phones deregister / reregiste
Anyone else having trouble connecting to proctorlabs.com?___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
LOL, I feel stupid. It was the flash player. I am good now.
From: Anthony Sequeira
To: 'William Affeldt' ;
"'ccie_voice@onlinestudylist.com'"
Sent: Tuesday, May 22, 2012 5:10 AM
Subject: RE: [OSL | CCIE_Voice] Issue with p
. The OS is Windows 7 Home Premium 64-bit
>
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of William Affeldt
> Sent: Monday, May 21, 2012 9:12 PM
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] Issue wi
Hey Gents,
I updated my IE and java today and now the proctorlabs site won't load the
login prompt or show the images of the different lab options. Also, an update
on my MAC did the same thing. Has anyone fixed this yet or ran into the same
problem? Any help would be greatly appreciated. __
Euro
Sent from my iPhone
On Apr 10, 2012, at 5:29 AM, Ken Wyan wrote:
> I want to configure a 2811 Router as a MGCP Gateway using CUCM GUI.
>
> I can't find isdn switch-type primary-net5 under CUCM GUI mgcp endpoint
> configuration page.
>
> which one is equivalent to primary-net5 avail
uot;param drop-through-option 1"
> - You probably want "param aa-hunt1 " instead of "param aa-hunt2 "
> - make sure moh is enabled and working
> - if it still doesn't work, "please turn ON debug voice application vxml" and
> post the debu
app-b-acd
>
> Thanks,
> Jason Langenfeld | Systems Engineer
> Prosys
> 6550 Carothers Parkway, Suite 420
> Franklin, TN 37067
> O 615.435.1540
> Email jlangenf...@prosysis.com
>
>
> From: William Affeldt
> mailto:william.affe...@yahoo.com>>
> Reply-To:
I configured BACD today and could not get it working. The dial-peer never
actually invokes the application. It does hit the correct dial-peer in and out
though. Below is my exact configuration. Any help would be greatly appreciated.
application
service app-b-acd-aa
param voice-mail 5003
pa
xpert.com/communities <http://www.ipexpert.com/communities> and our
> public website at www.ipexpert.com <http://www.ipexpert.com/>
>
>
> On Feb 4, 2012, at 11:42 AM, William Affeldt
> wrote:
>
>> You are having one way audio issues then.
>>
>> Sent from
> On Sat, Feb 4, 2012 at 1:44 PM, William Affeldt
> wrote:
> I am currently having the same problem. I have been troubleshooting for a
> hour now. It forwards to the correct VM box and you can even play the message
> back to your self after you record it. It just never makes it
I am currently having the same problem. I have been troubleshooting for a hour
now. It forwards to the correct VM box and you can even play the message back
to your self after you record it. It just never makes it to the mailbox.
From: Edgar Feliz
To: ccie_vo
NTP takes a long time. I would do other things and check it in 20 min
Sent from my iPhone
On Jan 22, 2012, at 5:56 PM, Errol Abrahams wrote:
>
>
> Hi All,
>
> I have a problem with the ntp stratum config on BR2-RTR router as per the
> config. I would like BR2-RTR to synch its ntp stratum cl
You actually don't need the prompt step. I use my script every lab and it still
creates the prompt.
Sent from my iPhone
On Jan 22, 2012, at 12:03 PM, William Affeldt wrote:
> Script
>
> Create document variable
> Just name the document.
>
> Accept step
> Recor
Script
Create document variable
Just name the document.
Accept step
Record. Step
Point record step at document variable
Save and upload to CCX
After recording your prompt use windows search.
Search for *.wav
order the files by date. The newest document will be your recording. Save to
d
The easiest way is to use a isdn map. You can always use translation rule and
profile too. I would not set anything in CCM for h323.
Sent from my iPhone
On Jan 21, 2012, at 12:09 PM, datucha123 datucha123
wrote:
> Hello,
>
> H323 Router by default (in IOS) sets the Calling Type and Plan fo
I would guess it is a variation of the bastard. I would not worry so much and
just start saving for the next attempt. You will eventually get something that
you can pass.
Sent from my iPhone
On Jan 21, 2012, at 11:17 AM, sam max wrote:
> Hi Guys,
>
> I am so so so upsad this time was my la
Anyone else having issues? Website is down and VPN.___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
That is a great Idea.
Sent from my iPhone
On Dec 8, 2011, at 11:57 AM, Ashraf Ayyash wrote:
> You can get it from the UCCX server in the prompt file ,
>
> Ash
>
>
>
> On Thu, Dec 8, 2011 at 1:25 PM, William Affeldt
> wrote:
>> Does anyone have a silent M
Does anyone have a silent Moh file already created that I can use?___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Make sure that you configured the codec under the dial peers on BR1. They use
g729 by default. Sounds like the dial-peers to call manager from BR1 don't have
a voice class codec or are a hard set codec configured.
Sent from my iPhone
On Nov 30, 2011, at 8:12 AM, Rynard Coetzee wrote:
> Hi gu
Is anyone else having trouble reaching the webpage?___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
The question "probably" does not restrict you to one DHCP pool.
Sent from my iPhone
On Nov 20, 2011, at 11:41 PM, Ken Wyan wrote:
> You can't provide 2 static ip addresses using a single dhcp pool on a cisco
> router
>
> Either you have misunderstood or a typo in exam.
>
>
>
> On Mon, No
I am 99.9 percent sure that the version in the lab only supports Software MTP
at g711. I am sure Vic can confirm.
Sent from my iPhone
On Nov 21, 2011, at 1:33 PM, Bartosz Sokolowski
wrote:
> You are wrong.
> Early Offer requires MTP. CCM doesn't care how you provide MTP.
> It's possible to c
Check that your h323 bind interface is up and reachable from the phone and call
manager. Also reset the gateway. Finally, if everything is up and pingable do a
debug voice ccapi inout to verify the matched dial peers. It sounds to me like
you bound the vlan interface and it is down because of a
If by wall jack you mean analog line from the provider then just plug it into
one of the FXO lines and PLAR the call to either the auto attendant or a phone.
Outbound calling will work also, just not at the same time.
Sent from my iPhone
On Nov 1, 2011, at 7:17 PM, Jonathan Preston
wrote:
>
0 (via GigabitEthernet0/0): !
> [OK - 8 bytes]
>
> 8 bytes copied in 0.184 secs (43 bytes/sec)
> BR1-2851#
>
> Successful.
>
> On Mon, Oct 24, 2011 at 5:08 PM, William Affeldt
> wrote:
> I don't think so but, every other file was working fine. I have a lab i
ploading?
>
> Chris
> Sent on the Sprint® Now Network from my BlackBerry®
>
> -Original Message-
> From: William Affeldt
> Date: Mon, 24 Oct 2011 14:49:37
> To: Ashraf Ayyash
> Cc: Chris Martin;
> ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | C
mory when i studied this feature ,
>
> but why you are uploading the List.xml to the root ? it should place
> on the same directory as the Photos
>
> Ash
>
> On Mon, Oct 24, 2011 at 4:12 PM, William Affeldt
> wrote:
>> Hi All,
>>
>> Thank you for the rep
directory and download it to BR2.
From: Chris Martin
To: William Affeldt
Cc: "ccie_voice@onlinestudylist.com"
Sent: Monday, October 24, 2011 1:51 PM
Subject: Re: [OSL | CCIE_Voice] Downloading List.xml from Call Manager.
Just to add, remember everythi
Ok, so I have to be missing something. I can't download the List.xml file from
Call Manager but I can download my image files. I have triple checked the file
name and the directory. I am downloading the file from same directory as the
images and they work fine. Is there something I am missing
Yes, I had my subscriber and cups lock up in the middle of the lab. The proctor
had to reload my whole pod server wise. Also, during the same exam my cue was
not reachable randomly. I had to reload it from the cue multiple times during
the lab to restore ip connectivity. Since It looked like I g
My VPN is up this morning but my servers are down.
Sent from my iPhone
On Oct 3, 2011, at 5:14 AM, pithog...@yahoo.com wrote:
> Hi experts,
>
> Has any one been able to connect to his servers on proctorlabs today? I
> struggled to connect to my servers for more than 5 hours but I couldn't all
I am still down.
Sent from my iPhone
On Oct 2, 2011, at 10:44 AM, Brian Mulgrew wrote:
> Hi - has anyone been able to connect to the voice racks since yesterday's
> outage?
>
> I have logged a case but was advised 5 hours ago that there is still a vpn
> issue with no eta for a fix.
>
> C
Got it.
Sent from my iPhone
On Oct 2, 2011, at 10:13 AM, Marko Milivojevic wrote:
> Pardon my brief message - it's 90% not an issue on the client side.
> We're working on it (still).
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S)
> Senior Technical Instructor - IPexpert
>
> On Sun, Oct 2,
VPN is down for me and a couple of other people I have talked to.
Sent from my iPhone
On Oct 2, 2011, at 7:26 AM, "Randall.Crumm" wrote:
> If you can't reach the server web GUI via IP, your issue is infrastructure.
> Check the config for hq rtr and your 3750
> Hth
> Randall
>
> Sent from my i
Yes, it appears to be down for me too.
Sent from my iPhone
On Oct 1, 2011, at 5:33 AM, Larry Stern wrote:
> Before I contact proctor labs tech support, is anyone else having extremely
> slow service on proctor labs site. Possibly all the racks are in use after
> being blocked out during the
Also, make sure you are not over your user limit. Every version except
enterprise has strict user limits.
Sent from my iPhone
On Sep 29, 2011, at 3:25 PM, Cisco Guan wrote:
> Thanks Ashraf.
>
> Already checked that. The telephone number for new users have been setup
> properly. I also check
Is anyone else having problems with proctor labs right now?
Sent from my iPhone
On Sep 24, 2011, at 6:27 PM, edgar feliz wrote:
> NO I trade this morning for a while and it was not available.
>
> EJF
>
> From: Rrcrumm
> To: Ken Wyan
> Cc: "ccie_voice@onlinestudylist.com"
> Sent: Saturday,
What does your debug voice ccapi say for the inbound and outbound dial peers?
You should be able to validate your translation and destination. Also check
your binding.
Sent from my iPhone
On Aug 25, 2011, at 5:57 PM, Cisco Nut wrote:
> Hello
> I have setup BR2 router so that when call come
That is usually the result of fast start not being enabled. I would also try
mtp required if that alone does not fix it.
Sent from my iPhone
On Jul 27, 2011, at 10:52 AM, Joel Tyson wrote:
> Wait for 245 MTC is unchecked on the GK trunk setting on CUCM. When
> setting CUBE to use g729 tak
When is your date?
Sent from my iPhone
On Jul 24, 2011, at 9:24 AM, donny f wrote:
> hi all,
>
> does anyone has experience when need to drop off /move lab date?
>
> I heard sick and emergency , Cisco will able to do without lose the money
>
> And what needed , how many days notice ?
>
There used to be a bug causing the web page to not show the phones being
registered. I think that was in version 5 though. I would also check srst and
replication if you have multiple call managers.
Sent from my iPhone
On Jul 21, 2011, at 11:07 PM, Rashid Khan wrote:
> Hi Friends,
>
> I am
You should look at this as a positive. If they deleted your test they may just
give you a passing grade. You will never know though. The person you should
contact is the lab ops manager. Her name is Kathe. She is a nice person and
will take your call at any time.
Sent from my iPhone
On Jun 22
Voice service VoIP
H323
Call preserve
Should be the command set. I use it as my default configuration.
Sent from my iPhone
On May 31, 2011, at 4:04 PM, CCIE Voice wrote:
> Sorry, should have been more clear. Using H.323.
>
> The call preservation feature of H323 applies when the gateway lose
I would do a wire shark packet capture on the phone side and see if you can see
both streams. If you can't repeat that at every hop until you find the break in
the stream.
Sent from my iPhone
On May 19, 2011, at 7:19 AM, Daniel Gómez wrote:
> Hello experts,
>
> I have the following scenario
I am currently using a consulted transfer in a script to transfer to a a few
phones. If they don't answer the call then it goes to Q. The issue is when the
phone being transferred to checks it's missed call directory it shows the CTI
port extension and not the actual calling number. Does anyone
What does the debug h245 say?
Sent from my iPhone
On Apr 19, 2011, at 11:27 AM, "Stephen Manuel" wrote:
> Ladies and Gentlemen,
>
>
>
> I have the following setup in my home lab.
>
>
>
> 1760 Router operating as BR1
>
> 2811 Router operating as HQ w/CUE running CME 7.1
>
> 2611 Route
53 matches
Mail list logo