Hello,
I was wondering if anyone has experienced ATA's not registering to the SRST
router during fallback... They are on the same DP as the phones, and the
phones register, but no registration on the ATAs...
Thanks,
-Dave
___
For more information
check out this
http://cciev.wordpress.com/category/ata186/
Scott ODonnell scott.odonn...@gmail.com wrote:
I'm trying to understand how the TOS field is used to adjust the markings on
the ATA for signaling and RTP packets.
Is anyone out there that understands this?
- Scott
| CCIE_Voice] ATA 186 TOS Field
To: OSL Group ccie_voice@onlinestudylist.com
Message-ID:
f0e3fd8b0905081045o4fd20d2exb0585ce6d598d...@mail.gmail.com
Content-Type: text/plain; charset=iso-8859-1
I'm trying to understand how the TOS field is used to adjust the markings on
the ATA for signaling
What version of ata software do people use to study with?
--
Sent from my mobile device
image...:(
I did shake it, opened the box and tried pressing the little button but no
good.:(
--- On Sun, 5/3/09, Michael Ciarfello mciarfe...@iplogic.com wrote:
From: Michael Ciarfello mciarfe...@iplogic.com
Subject: RE: [OSL | CCIE_Voice] ATA IVR not responding
To: kapil atrish nice_cha
-
From: kapil atrish
To: ccie_voice@onlinestudylist.com ; Michael Ciarfello
Sent: Sunday, May 03, 2009 10:43 AM
Subject: Re: [OSL | CCIE_Voice] ATA IVR not responding
Hi Michael,
Can u give more inputs reg turning IVR off via config-register? Haven't
heard abt
@onlinestudylist.com; Michael Ciarfello
Subject: RE: [OSL | CCIE_Voice] ATA IVR not responding
Hi Michael,
Can u give more inputs reg turning IVR off via config-register? Haven't heard
abt this before, sounds interesting.
Yes the Red light does come on and goes off perfectly fine. I was able
| CCIE_Voice] ATA IVR not responding
Hi list,
M not able to access the IVR menu on ATA.I know it should work on Phone
1 port, no success on any of the port. Reboot didn't help. Removed lan cable
and tried, no success. Checked physical layer stuff. Has anyone had this issue
?
- Original Message -
From:
kapil
atrish
To: ccie_voice@onlinestudylist.com
Sent: Saturday, May 02, 2009 8:25
AM
Subject: [OSL | CCIE_Voice] ATA IVR not
responding
Hi list,
M not able to access the IVR menu on
ATA.I know it should
...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of kapil atrish
[nice_cha...@yahoo.com]
Sent: Saturday, May 02, 2009 11:31 PM
To: ccie_voice@onlinestudylist.com; Cliff McGlamry
Subject: Re: [OSL | CCIE_Voice] ATA IVR not responding
Yes, that's what I am trying to invoke the IVR
Can anyone help,
Or sometime it get register but the ip phone which i get, if i try to browser
it says page cannot be displayed.
Urgent solution required ::
Thks
Add more friends to your messenger and enjoy! Go to
http://messenger.yahoo.com/invite/
ATA MUSET BE IN THE VOICE AND DATA VLAN ?
OR JUST VOICE VLAN
SET VLAN 140 (X/X) ATA PORT
SET PORT AUXILIARY VLAN (X/X) 240
THANK YOU
_
Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.
Seems like your ATA is connect on CAT6.
If your Voice Vlan is 140 then command on CAT 6 would be set vlan 140 X/X
- Basant
On Tue, Mar 3, 2009 at 9:28 AM, hasan khalife hasan_khal...@hotmail.comwrote:
ATA MUSET BE IN THE VOICE AND DATA VLAN ?
OR JUST VOICE VLAN
SET VLAN 140 (X/X) ATA
Hi,
I observed both ports on ATA register with dual-line even though max-dn
dual-line is not configured. Is this expected behavior?
I couldn't find much information on cisco reg this. See following capture
interface FastEthernet0/0
/call-mana
filtering...
call-manager-fallback
After switching over to max-dn dual-line I realised ATA actually registers with
two channels now. Earlier it showed two buttons both associated to Channel 1.
If someone can comment on the usage of two buttons with single channe or if
there is something wrongl, that'll be great.
See below
| CCIE_Voice] ATA COS ?
Hi Mike,
ATA does send COS bits and does speak 802.1q if configured to (however this
is the default).
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpach3.html#wp1115224
Specifically check out Table 3-1 second
Cc: ccie_voice@onlinestudylist.com
Sent: Thursday, February 12, 2009 9:03 PM
Subject: Re: [OSL | CCIE_Voice] ATA COS ?
Hi Mike,
ATA does send COS bits and does speak 802.1q if configured to
(however this is the default).
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english
Does the ATA send a cos value or just DSCP values ? If so, what is the
signaling and media set to by default ? I believe DSCP AF31 for signaling
and EF for media, but what about cos values ?
Thx,
Mike
, February 12, 2009 5:47 PM
Subject: [OSL | CCIE_Voice] ATA COS ?
Does the ATA send a cos value or just DSCP values ? If so, what is the
signaling and media set to by default ? I believe DSCP AF31 for signaling and
EF for media, but what about cos values ?
Thx,
Mike
Hi Mike,ATA does send COS bits and does speak 802.1q if configured to (however this is the default).http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpach3.html#wp1115224Specifically check out Table 3-1 second half:VLANSetting:•Bits 0-2—Specify
Message -
From: Mike Brooks
To: ccie_voice@onlinestudylist.com
Sent: Thursday, February 12, 2009 5:47 PM
Subject: [OSL | CCIE_Voice] ATA COS ?
Does the ATA send a cos value or just DSCP values ? If so, what is
the signaling and media set to by default ? I believe DSCP AF31 for
signaling
I'm on the rack nowATA186 is in SCCP mode.
Seeing as I don't have access to it...and files don't appear to be on the
rack.anyone ever had to deal with getting it into h323 mode in this
environment?
Is this even a realistic situation for the actual lab???
sorry i didnt get ur clue, can u plz guide me how to configure it from the
bigining?
i just register the connected port in the sw 6500 to the vlan and enable dhcp
,i miss some thing else?
Date: Sat, 7 Feb 2009 21:21:33 +Subject: Re: [OSL | CCIE_Voice] ATA
186From: ukcisco
load, you'll set it up like you do a phone, and it
will need option 150 for TFTP, etc.
- Original Message -
From: hasan khalife
To: ukcisco@googlemail.com
Cc: ccie_voice@onlinestudylist.com
Sent: Sunday, February 08, 2009 3:05 PM
Subject: Re: [OSL | CCIE_Voice] ATA 186
HOW I CAN REGISTER THE ATA 186 IN THE CCM ,I CANT MANULAY OR AUTO BY CCM WHY?
ANY CLUE ?
VLAN IS CORRECT ON ATA PORT[6500 SHARED SW],EVEN THE DHCP IS ENABLE ON THE
SERVER ,JUST PHONES APPEAR AND GET IP
THANKS
_
More than
If you connect to the web interface of the ATA is it in H323 mode? If so it
will never register!
On Sat, Feb 7, 2009 at 9:03 PM, hasan khalife hasan_khal...@hotmail.comwrote:
HOW I CAN REGISTER THE ATA 186 IN THE CCM ,I CANT MANULAY OR AUTO BY CCM
WHY?
ANY CLUE ?
VLAN IS CORRECT ON ATA
: Saturday, February 07, 2009 4:21 PM
Subject: Re: [OSL | CCIE_Voice] ATA 186
If you connect to the web interface of the ATA is it in H323 mode? If so it
will never register!
On Sat, Feb 7, 2009 at 9:03 PM, hasan khalife hasan_khal...@hotmail.com
wrote:
HOW I CAN REGISTER THE ATA 186
What versions of ATA software have folks seen in the labs? Are they using the
newer stuff, or the stuff that's older?
...@yahoo.com wrote:
AudioMode = 0x00150015
ConnectMode = 0x9400
is OK
--- On *Wed, 1/28/09, Ryan Trauernicht ryanstudyvo...@gmail.com* wrote:
From: Ryan Trauernicht ryanstudyvo...@gmail.com
Subject: [OSL | CCIE_Voice] ATA Passthrough
To: CCIE Voice Maillist ccie_voice@onlinestudylist.com
Date
I have an older version of IPExpert and it said for setting Passthrough on
an ATA186 set the following parameters:
AudioMode = 0x00140014
ConnectMode = 0x0400
though the following document tells me something different
AudioMode = 0x00150015
ConnectMode = 0x9400
AudioMode = 0x00150015
ConnectMode = 0x9400
is OK
--- On Wed, 1/28/09, Ryan Trauernicht ryanstudyvo...@gmail.com wrote:
From: Ryan Trauernicht ryanstudyvo...@gmail.com
Subject: [OSL | CCIE_Voice] ATA Passthrough
To: CCIE Voice Maillist ccie_voice@onlinestudylist.com
Date: Wednesday
...@gmail.com
Subject: [OSL | CCIE_Voice] ATA Passthrough
To: CCIE Voice Maillist ccie_voice@onlinestudylist.com
Date: Wednesday, January 28, 2009, 9:42 AM
I have an older version of IPExpert and it said for setting Passthrough on
an ATA186 set the following parameters:
AudioMode = 0x00140014
Hi all,wondered if someone experienced the fact the once the ATA gets
registered on an SRST router, it doesn't register back to the UCM anymore
once the callmanager comes back?
Any thoughts on this?
cheers,
Juan
I'm trying to get an ATA to run the SIP load.It's running the SCCP image
now.
I'm trying the manual method with the following command line on my PC
ata186us -d2 -any2 ata18x-v2-16-1-030709a.zup
I dial the 100#xxx.xxx.xxx.xxx*8000# on the phone and see the transfer start
on my PC.
After a moment
Certifications.
--
*From:* [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Juan
*Sent:* Wednesday, August 20, 2008 9:09 AM
*To:* OSL CCIE
*Subject:* Re: [OSL | CCIE_Voice] ATA ethernet connection state up/down
Hi Martin, Shadab, Stephen,
I tried
Hi,it should be basic stuff - but I'm having a real hard time getting my ATA
to connect to my ESW on the BR2 router...
I have configured the ethernet as follows:
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk native vlan 250
switchport voice vlan 150
spanning-tree
Office
518-588-2947 Cell
323-2120 VNET
[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Juan
Sent: Wednesday, August 20, 2008 7:25 AM
To: OSL CCIE
Subject: [OSL | CCIE_Voice] ATA ethernet connection state
] *On Behalf Of *Juan
*Sent:* Wednesday, August 20, 2008 7:25 AM
*To:* OSL CCIE
*Subject:* [OSL | CCIE_Voice] ATA ethernet connection state up/down
Hi,
it should be basic stuff - but I'm having a real hard time getting my ATA
to connect to my ESW on the BR2 router...
I have configured
]
[mailto:[EMAIL PROTECTED] On Behalf Of Juan
Sent: Wednesday, August 20, 2008 7:25 AM
To: OSL CCIE
Subject: [OSL | CCIE_Voice] ATA ethernet connection state up/down
Hi,
it should be basic stuff - but I'm having a real hard time getting my ATA to
connect to my ESW on the BR2 router...
I have
, but the ring back at ATA phone still playing.
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Re: [OSL | CCIE_Voice] ATA (H323)
w/ IPIPGW and CMDate: Sat, 16 Aug 2008 21:47:49 -0700CC:
ccie_voice@onlinestudylist.com
Look at the checkboxes on the h225 trunk... Mtp should be enabled. Ensure that
an mtp
Date: Wed, 13 Aug 2008 23:23:59 -0500
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [OSL | CCIE_Voice] ATA (H323) w/ IPIPGW and CM
CC: ccie_voice@onlinestudylist.com
Add:
Voice call send-alert
Voice RTP send-recv
Jonathan
On Tue, Aug 12, 2008 at 6:43 PM, Sérgio Polizer [EMAIL
Add:
Voice call send-alert
Voice RTP send-recv
Jonathan
On Tue, Aug 12, 2008 at 6:43 PM, Sérgio Polizer [EMAIL PROTECTED]wrote:
Hi,
I'm stuck on this for a long time: ATA (h323) à GK à IPIPGW
(transcoding) à CM (WB I, ex.V)
The call completes, but when CM ext. answers, the ring
: [OSL | CCIE_Voice] ATA (H323) w/ IPIPGW and CMCC:
ccie_voice@onlinestudylist.com
Add:
Voice call send-alert Voice RTP send-recvJonathan
On Tue, Aug 12, 2008 at 6:43 PM, Sérgio Polizer [EMAIL PROTECTED] wrote:
Hi,
I'm stuck on this for a long time: ATA (h323) à GK à IPIPGW (transcoding) à
CM
Hi,
I’m stuck on this for a long time: ATA (h323) à GK à IPIPGW (transcoding) à
CM (WB I, ex.V)
The call completes, but when CM ext. answers, the ring back at ATA phone still
are playing. After 10sec. the call are cleared.
For the other side, the call goes fine. Also, If ATA calls to
| CCIE_Voice] ATA in H323 mode
I hate to ask this question because I feel like it should be simple?
I have read and re-read the ATA for H323 section, and I'm not sure if I
just don't get it or what. I'm still unclear how to make the ATA from
SCCP to H323. I know it's something with entering the firmware
I tried that. So,
1) go to C:\Program Files\Cisco\TFTPPath and copy ATA030203SCCP051201A.zup
2) go to System Device Defaults
3) Under ATA paste in ATA030203SCCP051201A
4) reset the ATA?
It still shows as SCCP. hmm
Subject: RE: [OSL | CCIE_Voice] ATA in H323 mode
Date: Sat, 3 May 2008 17:23:08
]
Sent: Saturday, May 03, 2008 7:58 PM
To: Gregory Jost (grjost); ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] ATA in H323 mode
I tried that. So,
1) go to C:\Program Files\Cisco\TFTPPath and copy
ATA030203SCCP051201A.zup
2) go to System Device Defaults
3) Under ATA paste
Now that makes sense. I knew I was missing something simple. Thanks.Subject:
RE: [OSL | CCIE_Voice] ATA in H323 modeDate: Sat, 3 May 2008 18:01:37
-0700From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
The H.323 firmware will look something
like
, April 27, 2008 9:13:15 PM
Subject: [OSL | CCIE_Voice] ATA sccp version 3.xx auto registration with
CCM
has anyone managed to get ATA-186 sccp version 3.x auto-registration with
CCM?
I had to add it manually. I restarted CCM services after setting the DHCP
to 1. It gets IP address okay I can
PM
Subject: Re: [OSL | CCIE_Voice] ATA sccp version 3.xx auto registration with CCM
I
Thanks Edward,
regarding If your device is not registering make sure the TFTP is correct and
the EID is .
Do I neeed to define the TFTP address in ATA? I thot that just assigning EID
. and CM0 cm1 field
has anyone managed to get ATA-186 sccp version 3.x auto-registration with
CCM?
I had to add it manually. I restarted CCM services after setting the DHCP to
1. It gets IP address okay I can get access to the unit.
Also I noticed that the MAC address in ATA configuration page is different
than what
| CCIE_Voice] ATA sccp version 3.xx auto registration with CCM
has anyone managed to get ATA-186 sccp version 3.x auto-registration with CCM?
I had to add it manually. I restarted CCM services after setting the DHCP to 1.
It gets IP address okay I can get access to the unit.
Also I noticed that the MAC
Me too.
On Sat, Apr 12, 2008 at 11:28 AM, boonchin .ng [EMAIL PROTECTED]
wrote:
Hi Maark,
I followed your steps exactly and I got this loaded in the ATA186
(attached screen shoot)
VOICE-6500-1 (enable) sh cdp nei 2/27 de
Port (Our Port): 2/27
Device-ID: SEP000FF7C054DB
Device Addresses:
You probably already know this, but that is an image from a 7940G
Jonathan
On Sat, Apr 12, 2008 at 11:28 AM, boonchin .ng [EMAIL PROTECTED] wrote:
Hi Maark,
I followed your steps exactly and I got this loaded in the ATA186 (attached
screen shoot)
VOICE-6500-1 (enable) sh cdp nei 2/27 de
I have a couple questions regarding ATAs.
1. If an ATA is configured for DHCP and has and IP Addressed assigned to it
via DHCP. How do you get the ATA to release/renew its IP address?
2. Can you enable/disable SRST for ATAs on the ATA itself? I'm not referring
to a separate device pool (w/ srst
Delete the assignment from the DHCP server and reboot the ATA.
No idea on 2, but I would say no, because you would need to override
the ccm assignments from the dev pool...
Jonathan
On Mon, Mar 10, 2008 at 1:53 PM, Scott Monasmith [EMAIL PROTECTED] wrote:
I have a couple questions regarding
What does it say Bit 0 in the AudioMode field - does (the bit that
differs my answer from the UniverCD answer)?
You tell me if you think that 'feature' is going to be helpful for Fax
or not?
:-)
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
Is the ATA registered first to ucm?
Make sure the .zup extension is part of the phone load in the field.
Mark Snow
Sr Technical Instructor
IPexpert, Inc.
Sent from my iPhone
On Feb 22, 2008, at 6:17 PM, Jose Linero Welcker [EMAIL PROTECTED]
wrote:
Hi,
Sorry, maybe this is a stupid
: [OSL | CCIE_Voice] ATA Fax Settings
Just to verify, in order to configure pass through on the ATA186,
set audiomode to 0x00140014 and connectmode to 0x0400.
I keep seeing different values, and I assume these values can be set
differently and still have it work?
Thanks
The ata doesn't understand an auxilary vlan
2/9 POD29-ATA-186connected 390a-halfa-10
10/100BaseTX
set port auxiliaryvlan 2/9 490
set port name 2/9 POD29-ATA-186
This is not correct
change it to
set port aux 2/9 1
set vlan 490 2/9
On 2/14/08, Mark Cardwell
Apprciate your kind response and willingness to
upgrade. But was wondering if I will be able to do
myslef during my next session. If not can you please
do it for me on Pod14 I will be using on Feb 16th from
1PM to 9PM EST.
Regards,
Anil
--- Mark Snow [EMAIL PROTECTED] wrote:
If you send me the
never mid it was set to H323 firmware.
--- anil batra [EMAIL PROTECTED] wrote:
Finally ATA got IP from DHCP but once I added it to
CCM and it shows not found. I double checked MAC
address enter is correct. Any clue please ???
Regards,
Anil
Working with ATA's remotely can be quite challenging.
Possible - but very limited in what you can do.
eBay has them literally for $20 or so. Be highly worth while to pick
one up and connect it back to PL and use it local to you with an
analog phone - just as you would a hardware phone.
Appreciate your kind response Mark.
Will appreciate if you can confirm that
set vlan 210 2/4 is correct please so that in actual
lab I don't mess it up.
-anil
--- Mark Snow [EMAIL PROTECTED] wrote:
Working with ATA's remotely can be quite
challenging.
Possible - but very limited in what
Sorry forgot to include links (but better if you find them yourself on
DocCD - I can't stress enough how being familiar with the structure
(and brokeness) of the DocCD can be come lab day!!).
http://www.cisco.com/univercd/cc/td/doc/product/voice/ata/ataadmn/sccp3_0/index.htm
And more
Thx Mark and Oasis.
--- Mark Snow [EMAIL PROTECTED] wrote:
You can set to the access vlan - however ATA does
also respond to
Dot1Q trunking as well.
So a Auxillary Vlan or Voice Vlan on a 3550 along
with a dot1q trunk
manual will work also.
Mark Snow
CCIE #14073 (Voice,
Actually it can understand it - otherwise what good would 802.1p bits
be worth - and it has a field for them (only carried in the 802.1q
header).
Remember - everything in the ATA is written in Hex - so be good with
hex to binary and finding what bits you need to change in the ATA
Admin
I am sure Mark will respond, but yes as long as you put the ATA-186 directly
in the Voice Vlan using the command you have mentioned it will just work
fine, it can not understand the auxiliary command.
Thanks
Ovais.
On 2/10/08, anil batra [EMAIL PROTECTED] wrote:
Appreciate your kind response
You can set to the access vlan - however ATA does also respond to
Dot1Q trunking as well.
So a Auxillary Vlan or Voice Vlan on a 3550 along with a dot1q trunk
manual will work also.
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco
I think the ATA might be a bad DHCP client. I've noticed sometimes that I
must power cycle the ATA after setting the vlan and configuring the dhcp
scope. before the power cycle the ATA isnt even in the cam table on the
6500. after the power cycle, the ata shows up in cam and also pulls an IP.
I
Please forward the config inline in this message that you have for
your HQ Rtr.
Cheers,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Has any body tried the solution in section 5.6 concerning the ata h323
registeration with gatekeeper.
when i try to call the ata phone it rings with no sound heared in both
ways. and dissconect after 30 sec.
also i can find the sdspfarm config command under the SRST.
Any ideas
With Regards
72 matches
Mail list logo
