Someone sent me this if anyone is interested. They are
not
on this list, ck the web page.
===
He mainly deals in 1973-1987 El Caminos, and he has about 3 in the
'64-'67 years. He has about 20 El Caminos, some he is building and
some he is
sorry about that thinkin and typing are 2 different things + when dinner is ready NEVER TYPE dislexia is a terrable thing to have/and hunger
randy g[EMAIL PROTECTED] wrote:
In a message dated 4/29/2004 8:37:17 PM Central Daylight Time, [EMAIL PROTECTED] writes:
I remember when I left my old
yes I have. I used it on the lower rockers, had a small hole it filled it right up.
Also I have a few nova friends that acutally painted over it and it came out great.
POR-15 sells a kit for floor repair and from what I hear about that is also great news.
it requires a little putty,sanding then
I did my entire interior floors everything I could get paint on,inside trunk,then I did a new gas tank,underneth it and all the way to the firewall.
AND all I used was a 1/3 of a gallon if that.
NOW i am starting my new project 64 skylark , everything on the car looks pretty good,NO rust on
Well at least you know that your leg won't rust now!
8^]
Jim
'66 Malibu
'59 Corvette
--- BiG_DOG [EMAIL PROTECTED] wrote:
well ohhh welll...well well I cant belive it I had
bought a pint of POR-15 to do my package tray on my
64 skylark then I remember I had bought a gallon of
the stuff
a
Try the POR seam sealer
AWESOME!!
- Original Message -
From:
BiG_DOG
To: [EMAIL PROTECTED] ; The Chevelle Mailing List
Sent: Friday, April 30, 2004 1:36
AM
Subject: Re: [Chevelle-list] Hurray for
POR-15 again (R)
yes I have. I used it on the lower rockers,
A friend of mine sent it to me.
-Original
Message-
I'm just wondering how john found it?
See also,
http://www.prestage.com/Tech+Info/Rear+Axles/Identifying+GM+10-Bolt+Rear+Ends/default.aspx
- Original Message -
From: James Mountjoy [EMAIL PROTECTED]
To: The Chevelle Mailing List [EMAIL PROTECTED]
Sent: Thursday, April 29, 2004 8:38 PM
Subject: [Chevelle-list] 10 bolt rear
It looks like the easiest way to distinguish between an 8.2 and 8.5 is by
the pinion nut. Thanks for that link Bill.
-Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bill Bruyn
Sent: Friday, April 30, 2004 10:41 AM
To: The Chevelle Mailing List
Thanks for the feed back guys. Zip Products had the gasket separate for
$12 and the gasket, lid and bail arm for $36. From the detailed online
picture it looks correct - I'll give an update when I receive it.
Thanks again!
Krister
I need to replace my master cylinder (round single
Thanks for the info. So, no Chevelles came with
radiator overflow?
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, April 27, 2004 5:51
PM
Subject: Re: [Chevelle-list] Overflow and
part numbers ?
Here are the part numbers
How about this one?
http://www.hinshawschevelle.com/shop/index.php?scat=292Item=40505
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, April 27, 2004 5:51
PM
Subject: Re: [Chevelle-list] Overflow and
part numbers ?
Here
That was new for me to, thanks !
Full Revs!!!
:o)
André
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Studly
Sent: 30. april 2004 17:08
To: The Chevelle Mailing List
Subject: RE: [Chevelle-list] 10 bolt rear - determining 8.2 vs 8.5
It looks
OK, answer to question 1. No Chevelles ever came with an overflow system
Question 2: You can add that one if you like. Some guys simply add an
aluminum canister to the side of the radiator. It all depends on what you want it
to look like when done.
Tom
OMG! When I looked at it the day before it
went to the list, it only had 60k hits. It went to 11.2 million hits in
such a short time.
That's crazy!
At 01:24 PM 4/30/2004, you wrote:
How about
this one?
http://www.hinshawschevelle.com/shop/index.php?scat=292Item=40505
Like Tom said, this didn't come on any Chevelle. You can pick up a
kit like this at any of the parts stores for less than the one at
Hinshaw's. I got mine at AutoZone and
I have been advised by multiple sources that my timing
is too far advanced, b/c I am getting a slight
knocking when my car is under load-
I am trying to understand the whole concept of timing
in general, but for now I just want to resolve the
immediate problem. I have a timing light but am not
I did something very similiar with my '69, except that I mounted it up
and inside the right front fender. It's mostly hidden from view,
and is a pretty clean solution. I could provide pics, and I
got a similar plastic tank at AutoZone for about $8.
Bill Lessenberry wrote:
At 01:24 PM 4/30/2004,
I have seen some cars where they convert the windshield washer tank to a
rad overflow tank. It looks pretty good except can't use the windshild washer
any longer.
- Original Message -
From:
mark
fellman
To: The Chevelle Mailing List
Sent: Friday, April 30, 2004 2:23
If you want something a little more spiffy,the street rod industry has some
nice overflow cans out there.
Clint HooperHH Custom,ownerLT5 Registry Directorhttp://www.LT5Registry.net/ACES
#1650http://dalesplace.com/misc/friends/clint/clint_hooper.htm
I took one of my kids bubble bottles (1.5 X 4), painted it black and
rested it in the lower corner in between the radiator frame. The overflow
tube that clips and runs down the full length of the radiator sticks inside
the bottles and keeps it in place. You don't even see it unless your
Just remember that a coolant recovery system is different than a simple
overflow can. The coolant recovery system requires a different radiator cap
and overflowed coolant generally runs into the BOTTOM of the recovery
canister. Coolant is added to the canister and not the radiator when
coolant
I am trying to understand the whole
concept of timing
in general
There are basically two types of timing on motors--1.Cam timing, which is
the relationship between the cam lobes' opening and closing points and
the crankshaft position. This is set when the motor is built, and
cannot be changed
Sorry for the spam but sometimes we all need a good laugh.
http://espn.go.com/outdoors/sportingdogs/news/2004/0426/1790401.html
Clint Hooper
HH Custom,owner
LT5 Registry Director
http://www.LT5Registry.net/
ACES #1650
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
Title: Message
Does anyone out
there have the URL for a Web site that shows a silhouette of your car and then
you can pick awheel and it will show you what your car will look like with
that wheel? Looking forward to CB04.
Thanks in
advance.
John L.
ACES #5597
70 LS5TRIBUTE
Title: Message
Some of your higher end tire stores have computers
that do that. I know out here in the PNW we have Les Schwab Tire
Centers. They have that very service. I don't know of anything
online, but that sure doesn't mean it doesn't exsist.
Jon
Project Maliblu
'66 Chevelle
-
let me know what you all think!! Don't forget to
click the link at the bottom of page 1 to go to page 2.
http://www.lowriderimpala.com/teardown.html
Dan McIntoshStreet Metal
FabricationsPavement Scraping 1964 Impala S.S.http://www.lowriderimpala.com
Title: Message
American Racing's website has this feature. Of
course,it's for their wheels only.
Clint HooperHH Custom,ownerLT5 Registry Directorhttp://www.LT5Registry.net/ACES
#1650http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From:
John W.
Very cool,Dan.
Clint HooperHH Custom,ownerLT5 Registry Directorhttp://www.LT5Registry.net/ACES
#1650http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From:
Dan
McIntosh
let me know what you all think!! Don't forget to
click the link at
Title: Message
Thanks
Clint I'll give that a try.
John L.
ACES #5597
70 LS5TRIBUTE
http://chevellfan.com/index89.html
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Clint
HooperSent: Friday, April 30, 2004 6:57 PMTo: The
Chevelle
SWEEET!!! and I'm
not even a fan of LowRiders. Very nice work.
Jon
Project Maliblu
'66 chevelle
- Original Message -
From:
Dan
McIntosh
To: impala list ; [EMAIL PROTECTED]
Sent: Friday, April 30, 2004 4:58
PM
Subject:
LMAO!
Clint Hooper
HH Custom,owner
LT5 Registry Director
http://www.LT5Registry.net/
ACES #1650
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: Dennis Kiernan [EMAIL PROTECTED]
Sorry for the spam but sometimes we all need a good laugh.
Well Im thinking very serious about getting a Hotchkis
TVS suspension system (part #80001). Anyone know where I can get the best price
on this? Hotchkis has it for $1279 and Summit
$1219 (I think). Anyone have experience with a different (but similar) system?
Im looking for the look (and
Nathan Crowe has a Hotchkis group purchase going on
over at Team Chevelle. Tell him I referred you.
Clint HooperHH Custom,ownerLT5 Registry Directorhttp://www.LT5Registry.net/ACES
#1650http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From:
Cutter
Title: Message
Try http://www.autowaretech.net/swonline/are_low.htm
Dale McIntosh TC Gold #92/ACES #1709/NECOA #41 GR8PMKN FOR SALE DalesPlace My 67
SS and 67 El Camino ChevelleStuff Decoding info on 64-72 Chevelles
MidwestChevelles Midwest Chevelle Show Information
I've stopped 7,834
Building onto my 468 big block. Goes into my 66 coupe/ T-400. Having a time finding the correct headers that will fit into the compartment. Thanks in advance.
66 Jack
Jack Thorpe
[EMAIL PROTECTED]
let me know what you all think!! Don't
forget to click the link at the bottom of page 1 to go to page
2.
Blinded by the Light!!! Really nice Dan--the mirrors are
cool.
BL
Hi
Jack,
Check
out Stahl Headers...
http://www.stahlheaders.com/Frame%20New%20Drag.htm
I was
going to get a set of Headers by Ed but the Stahl Headers look almost identical
and are half the price, plus they only take 3-4 weeks to build vice 6
months!
Herb
Title: Message
yes John,I used one's web page a few times,it
lets you pick your model, even pick your color,,but its been a while since I
used it,,so [the mines the first thing to go,,,right ?] I don't recall the wheel
manufactor,,but it was a major brand wheel co. just try some wheel
Oh I thought you were looking for a dress :) ( for a wedding)
No, I'm not planning to marry any size 12's.
-Original
Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On
Behalf Of [EMAIL PROTECTED]
Sent: Friday, April 30, 2004 11:25
PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-list] [OT]
only on ebay...
Oh I thought you
On the same note, I have a trip planned from Houston Texas to somewhere
in New York next week or two. I will be headed up there to pic up a race
care that my son bought. Any one headed this way with an empty load that
could meet me somewhere closer than New York or if anyone needs something
You certainly did a nice job Bob 71 Elky
43 matches
Mail list logo
