ditto!
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Monday, March 13, 2006 11:17
AM
Subject: Re: [Chevelle-list] Silicone
Plug Wires
Shawn:
Yourreplyis a good example of the level of respect that
everyone on
now wait just a moment, some of us have brains but
still end up with the tools in the refrigerator and the beer in the tool
box
- Original Message -
From:
vin
To: The Chevelle Mailing List
Sent: Monday, March 13, 2006 12:35
PM
Subject: Re: [Chevelle-list]
I'm pretty sure we'll try to get the Eastbound CB Convoy together
again this year. Last year we all met in Lonoke on Wednesday drove
up from there. Guys from AR, OK, TX, MS, and CA all joined in, and
everybody's welcome to come along with us. This is how it worked out
last year--
The first post is up. All of ya'll heading to CB06 travelling I-40
through Arkansas are invited to come along, or you can meet us in
Memphis. Let's see if we can get 15~20 Chevelles on the road together!
http://www.chevelles.com/forums/showthread.php?p=864036#post864036
BillL
If you have a vacuum leak big enough to stall the
engine I would first look to see if you have any open vacuum ports on the
carburetor.Some carburetors have a large vacuum port in the throttle plate at
the rear of the carb.
Bill Vander Werf
- Original Message -
From:
Crazy
Is there a web page out there that lists the 1970 Chevelle VIN trim codes?
www.chevellestuff.com
Also, what is the designation of a true SS vs. a regular Chevelle coupe?
http://www.chevelles.com/shop/66_67_ident.html
http://www.chevelles.com/shop/ss_ident.html
Thank you,
John Nasta
Pull the plugs crank it over, any water in the cylinders will be
pumped out. Change the oil filter it should be fine. I'd also
change the trans and diff fluids since water could get in through the
vents. Even if no water got into anything, it's just good
preventative maintenance.
BillL
i once lived near Cut-n-shoot Texas
Bill Bradley
67 Malibu
Edmond Ok.
- Original Message -
From: [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Wednesday, March 01, 2006 6:48 AM
Subject: Re: [Chevelle-list] Off topic wackiest street names
its north east of Houston
- Original Message -
From: Dale [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' Chevelle-list@chevelles.net
Sent: Wednesday, March 01, 2006 5:49 PM
Subject: Re: [Chevelle-list] Off topic wackiest street names
Bill - that anywhere near Crossover, TX? Never
Sorry I'm late--got busy here at work
BillL
OK, whos turn is it?
Dale
McIntosh
67 El
Camino
1967 Chevelle Reference
CD
http://www.chevellecd.com
ACES #1709/TC Gold
#92
From:
[EMAIL PROTECTED]
[
mailto:[EMAIL PROTECTED]] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, February 27, 2006
get yourself off? snickernah, just too
easy
- Original Message -
From:
Dale
To: 'The Chevelle Mailing List'
Sent: Monday, February 27, 2006 5:31
PM
Subject: Re: [Chevelle-list] Re
unsubscribe
For the first time
this year, but woefully not the
arround as much as i'd like since i broke my back. i do
like to do most of the work myself, but sometimes its best to know whats
beyond my physical limitations.
any volunteers? i'd buy the beer :)
Bill Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From: John Nasta [EMAIL
on steel
is reason enough not to use it. There are a number of sealers out there that
will provide a temporary leak stop without the problems silicone can cause.
Bill Vander Werf
- Original Message -
From: Mike Holleman [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list
www.true-connections.com www.autoobsession.com www.oldcarnetwork.com
www.genesgeneralstore.com www.AmericanGraffiti.biz www.ss396.com
That's a start for you. ;-)
At 02:36 PM 2/23/2006, you wrote:
i am looking for door chrome for a 1964 chevelle malibu 2 door hard
top and it is not an ss
hehehehe
- Original Message -
From: Clint Hooper [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Thursday, February 23, 2006 7:19 PM
Subject: Re: [Chevelle-list] Starter problems
Oh,no,,not the HEI install posts again. Sounds like it's time for me to
Nah, I know you better than that. We couldn't kick you off of here
even if you wanted to go! Where else can you go to abuse be abused
by such a good group of folks??
You me, we'll never leave. :-P
BillL
At 07:19 PM 2/23/2006, you wrote:
Oh,no,,not the HEI install posts again. Sounds like
if she is a helper, she is a keeper!
- Original Message -
From:
Michael
Heiser
To: Chevelle-list@chevelles.net
Sent: Monday, February 20, 2006 12:41
PM
Subject: [Chevelle-list] Today's
chuckle
Thought you might enjoy this...
We just finished a home
John
sounds like yours has "the other woman" mentality.
the last one i had like that i traded in for a better model. keep the faith, it
could be much worse.
- Original Message -
From:
[EMAIL PROTECTED]
To: The Chevelle Mailing List
Sent: Monday, February 20, 2006 3:07
More than likely your new rebuilt master cylinder is kaput. I wouldn't say
it's the fault of the guy who did your brakes, it's just one of those s**t
happens things.
Bill Vander Werf
- Original Message -
From: Peter Hnat [EMAIL PROTECTED]
To: chevelle-list@chevelles.net
Sent: Monday
You probably won't find it. You may find an interior
broadcast sheet that looks like the one in this thread-
http://www.chevelles.com/forums/showthread.php?t=118873
Read through this thread about 68 build sheets-
http://www.chevelles.com/forums/showthread.php?t=112363
A POP (Protect-O-Plate)
Title: My 1966 work in Progress
looking good
- Original Message -
From:
The Hanks
To: Chevelle-list@chevelles.net
Sent: Wednesday, February 15, 2006 11:28
PM
Subject: [Chevelle-list] My 1966 work in
Progress
Thought I would post some pics of my 1966 that I
got snow up here in edmond last night, there goes
my weekend playing on the road
Bill Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From:
Dale
To: 'The Chevelle Mailing List'
Sent: Friday, February 17, 2006 11:25
AM
Subject: Re: [Chevelle-list] Why I
i guess i waited too long
Bill Bradley
- Original Message -
From:
John Nasta
To: The Chevelle Mailing List
Sent: Friday, February 10, 2006 1:23
PM
Subject: Re: [Chevelle-list] In case
anyone is interested...
DISCLAIMER: If you are a Christian
worked that time Clint
Bill Bradley
67 Malibu
Edmond Ok
- Original Message -
From: Clint Hooper [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Tuesday, February 07, 2006 9:28 PM
Subject: Re: [Chevelle-list] Wheel size
Well,let's try it again.
http
some things computer
related that can affect us all due to the medium we use for this list.
let your concience be your guide
CHEVELLES FOERVER!
Bill Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From: Karl Groves [EMAIL PROTECTED]
To: 'The Chevelle Mailing List' Chevelle-list
anyone wanna proofread for me next time? LOL
- Original Message -
From: Bill Bradley [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; The Chevelle Mailing List
Chevelle-list@chevelles.net
Sent: Saturday, February 04, 2006 11:07 AM
Subject: Re: [Chevelle-list] Off-topic messages (was RE: FW
It is a fun forum , we have a
way to un-sub, I'm sure someone
will post it..
That's my cue! :-)))
To unsubscribe from this service you must first
purchase a
Craft-O-Matic Adjustable Subscription Cancellation
Unit. The unit can be
obtained from most hardware stores and dental clinics.
Be
I looked at mine again this morning, and I WAS WRONG AGAIN!!
The parking lights DO stay on with the headlights. Sorry
guys. Will someone please bring a HD John Deere tractor down here
to pull my head out of my a--??
BillL
At 09:14 PM 1/31/2006, you wrote:
The 68 Chevelle I
have, the running
Any of ya'll ever been to the Land Speed Races at Bonneville? I'm
planning on going to the October meet would like info on weather,
best places times to be, and any thing else you can tell me. I
already know about sunscreen under my chin bottom of my ears (sun
reflection from the salt).
68's did not have the park lights on with the headlights.
BillL
At 10:17 PM 1/30/2006, you wrote:
As 68 was the first year of
the side marker lamps, maybe thats when they kept parking lamps on as
well? Be a bit of trivia that may come in handy later. Be
sure to let us know what you discover
For those of us whose Craft-o-Matic Subscription Cancellation Units
are running a little sluggish, I have found a source for new Flux
Capacitors that will bring that baby back to full speed or
better!! They also have many other useful and hard to find parts
such as Muffler Bearings, Round
They're available for a 68 now? That must be a new item.
BillL
At 08:22 AM 1/30/2006, you wrote:
Repro dash carriers are available if he's willing to go that route. Probably
easier than trying to find a really good used one.
John Nasta
Now we get to buy more bulbs more often because they're on more.
Hey, Tom, had a chance to measure your top yet??
BillL
At 08:28 PM 1/30/2006, you wrote:
On pre 67 cars, the
parking lights are not supposed to be on when the headlights are one,
that's the way it was designed for some odd reason.
If any of you have a 68 or 69 with the original vinyl top, would
you mind taking some measurements for me? I need to know the
distance between the seams on the top at the top of the rear window and
the top of the windshield. The original top should have the seams
below the rear window lining up
my thoughts exactly, but thats also an excuse of
mine.
Bill Bradley
67 Malibu
Edmond Ok
- Original Message -
From:
Ryan
Langstraat
To: The Chevelle Mailing List
Sent: Saturday, January 28, 2006 9:12
AM
Subject: Re: [Chevelle-list] Body on
rotisserie - support
i also have 40's on mine, and they are a little
loud for me.
Bill Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From:
Ron
To: 'The Chevelle Mailing List'
Sent: Saturday, January 28, 2006 8:58
PM
Subject: Re: [Chevelle-list]
Flowmaster
I
, let me know I'll
send them to you. The ones on the TC links have turned into red X's.
BillL
At 02:18 PM 1/29/2006, you wrote:
Bill,
I'm sure this is the orginal top.
From the outside of the seams:
top of the windsheild 47 1/2
top of the rear window 42 1/2
bottom of the rear window 41 3/4
Dale, please send them to me @ [EMAIL PROTECTED] If
you'd like the pics I have, I'll mail them to you also. I'll look
at yours first since they might be the same.
BillL
At 02:29 PM 1/29/2006, you wrote:
I dont own a 68 or 69 but I
do have a photo of some original 68s that shows the seam
Rich, is your car a 68 or 69??
BillL
At 02:18 PM 1/29/2006, you wrote:
Bill,
I'm sure this is the orginal top.
From the outside of the seams:
top of the windsheild 47 1/2
top of the rear window 42 1/2
bottom of the rear window 41 3/4
No, they do not line up with the trunk opening!!
Rich
I've used the gasket hole punches before. Bought a cheap set at
Harbor Freight. You can heat them with a propane torch burn clean,
round holes through the fabric. You will have to know where the hole
goes first.
BillL
At 04:50 PM 1/27/2006, you wrote:
I need to drill holes in the carpet
amen to that!
Bill Bradley
67 Malibu
Edmond Ok.
- Original Message -
From: Bill Lessenberry [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Thursday, January 26, 2006 9:18 PM
Subject: Re: [Chevelle-list] Fw: Psalm 23 (For the Work Place)
No, too bad
Yep, it did, $412,500 according to the RS site
http://www.russoandsteele.com/
BillL
At 03:15 PM 1/26/2006, you wrote:
HI,
Does anyone know if this car sold?
Gene
- Original Message -
I don't think that information is released.
BillL
At 03:19 PM 1/26/2006, you wrote:
Did
they say who bought it?
No, too bad for you.
I get my religion at church on Sunday.
This is a site for cars, specifically Chevelles, and matters automotive.
Please don't post religious or political topics. They will NOT be appreciated.
BillL
At 07:04 PM 1/26/2006, you wrote:
TO BAD FOR YOU!!!
- Original Message
Ain't no bushings in tie rod ends, they're steel on steel joints.
BillL
At 07:24 PM 1/26/2006, you wrote:
You know there are other bushings in the front end..like tie rods and such
that have bushings besides the A arms with the Del-a-lum bushings.
Team Chevelle free classifieds
www.chevelles.com
At 05:53 PM 1/24/2006, you wrote:
If a guy
was thinking about selling his chevelle where is the best place on the
internet to list it?
Thanks
Jack's 66
I've got a bunch of stuff I might sell at the right price too. Email
me with what you might want I'll see what I can come up with.
(Feeling like a smart A-- tonight. It's been a long, unproductive
day leading into a night I have to work :-o)
BillL
At 06:50 PM 1/19/2006, you wrote:
I have a
FYI, that truck was probably assembled in Smyrna, TN. My GMC truck
was assembled in Ontario, Canada. Which one is American??
:-| (That ought to start something)
BillL
At 03:34 PM 1/18/2006, you wrote:
Yeah Tell the guy
to buy AMERICAN
Now, I don't think this answers the question, but it's something to chew on.
-Matt
Chomp, chomp, chomp ;-) ( I love these little emoticons I got when
I upgraded my email program :D )
BillL
www.chevellestuff.com
At 12:37 PM 1/16/2006, you wrote:
At one time I had located a web-site that explained all the codes
on a firewall tag. My computer took a crap and now I have lost all
my favorites. Can anyone help me out with this web-site again.
Thanks, Russ
This sucker isn't made with the bleeder not at the top of the slave
is it?? Peugeots were like that, the bleeder was put at the bottom
of the slave the hose at the top. What I did was to get a new
squirt type oil can, fill it with brake fluid and back-bleed the
system from the slave to the
www.rightstuffdetailing.com It's the right stuff. 8-)
BillL
Hey guys, I just ordered up new stainless fuel and brake lines. I
was wondering if anyone knew who sells the clips that hold the lines
to the frame. My old ones are pretty much gone. Thanks -rj
I think you have it backwards. I always get the reservations first
since the motels fill up early. Sometimes there are other events in
the area that will create a room shortage. You can always call
cancel your reservations if you're unable to go.
BillL
At 09:18 PM 1/11/2006, you wrote:
These guys come highly recommended. I'm sending my bumpers to them
when I get ready. http://www.tricityplating.com/
BillL
At 08:38 AM 1/9/2006, you wrote:
Does anyone know of any good chrome plating places? Or is it more
cost-effective to just buy new bumpers? I'm looking at $150-ish per
a) Remove the steering wheel hub and put the hub back on in a different
orientation.
Do this to get it close, then it can be fine tuned by adjusting the
tie rod ends.
BillL
Anyway, enough babbling from me. I'm very glad to have found this list.
Last, can someone tell me something about my car from this VIN?
136371B202451
Welcome to the list. A huge amount of information about Chevelles will be
found at www.chevelles.com/forums and www.chevellestuff.com Use
Exactly!! I hope we all will learn from others' mistakes. I'm
in the car repair business. I've figured out that the times you
don't open the box immediately are always when the wrong parts are in the
box. :-(( But how can you get $5K worth of Chevelle
parts not open it up?? That would be like
Some pics here--
http://www.chevelles.com/showroom/Ark68SS/
If you need more, I can send to your email address as attachments.
BillL
At 07:06 PM 1/4/2006, you wrote:
Hey Bill
Lessenberry,
I was looking through last years CB pics and saw your car. I am
thinking of painting mine the same color
isn't the 307 a small block olds engine? the same as the 350R ?
- Original Message -
From:
Herb Lumpp
To: The Chevelle Mailing List
Sent: Monday, January 02, 2006 6:11
AM
Subject: RE: [Chevelle-list] Fram
Mounts
I've seen this discussion numerous times
It's one of those #'s matching 138xx 68 SS, Seafrost Green, black vinyl
top, bench seat, column shift, 350hp, TH400, 3.07 rear, Chevelles that's
going to stay as original as I can keep it, but I still drive it every
where it goes. I traded a 9.90 sec 76 Nova drag car for it.
BillL
didn't do it, I promise!! g
BillL
At 12:05 PM 12/30/2005, you wrote:
Bill, You've got a virus!
-Original Message-
From: Bill Lessenberry [EMAIL PROTECTED]
Sent: Dec 30, 2005 11:42 AM
To:
Subject: Re: [Chevelle-list] OK youse guys, it's coitains
No thanks, the car's all together, l'm looking for luxury stuff now
:-)
BillL
At 09:27 PM 12/27/2005, you wrote:
Hey
Bill...
You wouldnt happen to be looking for any coil springs or rear top control
arms for your 68? If so I have front and rear coil springs I was
just getting ready to Ebay
ditto
Semper Fi
Bill Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From:
Dan
To: The Chevelle Mailing List
Sent: Sunday, December 25, 2005 8:55
AM
Subject: Re: [Chevelle-list] Merry
Christmas From The War on Terror
All of us back home are behind
Got any cruise control parts for a 68???
BillL
At 09:11 PM 12/27/2005, you wrote:
I
know I have been busy cleaning stuff and taking pictures of item to list
auctions up on e-bay with their 10 cent insertion fee for today
only.
- Original Message -
From: bob howard
To:
That was
GREAT!!!
MERRY
CHRISTMAS
to all of you and my best wishes for a safe, prosperous, and
healthy New Year!!
BillL
At 08:38 PM 12/23/2005, you wrote:
Thought
this was a cool card some of you might like to forward to
someone...
http://www.reuters.hu/card_dom/index_content.html
Merry
playboy has pictures?
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Sunday, December 18, 2005 1:41
PM
Subject: Re: [Chevelle-list] Mike's
Tempest
Read Playboy ?? Andre I just look @ the pictures:-X
Larry
(Z)
At 10:57 AM 12/15/2005, you wrote:
please
remove me from list thanks
I thought you had been here long enough to know how to do that, but
anyway--
To unsubscribe from this service you must first
purchase a
Craft-O-Matic Adjustable Subscription Cancellation
Unit. The unit can be
obtained from
Copy paste, takes about 20 seconds.
I have had a show car for over two years now, even won some trophies with
it. Wanna see it?
http://www.chevelles.com/showroom/Ark68SS/
I used this list to get a lot of advice help on the car.
BTW, you get a monthly reminder on how to unsubscribe. May I
Thanks, I had it made at the local mall at a T-shirt place. There's
probably something like that in your area.
BillL
At 06:22 PM 12/15/2005, you wrote:
I love the Real Cruisers have rock chips tag. I need one, and I have
the chips to prove it.
Bob Haggard
I hope they're really good. Angee I are going to their concert in LR
next Wednesday. I'll give ya'll a report. Here's their tour
schedule--Clint, if you can get to San Antonio, Dallas, or Houston you can
see them too! http://www.trans-siberian.com/ontour/
BillL
At 07:48 PM 12/15/2005,
These are parts I installed on my car in May 2004. I bought a front disc
kit from True Connections and these are the parts that were in it. I have
since replaced them with the correct stuff for the original restored look
I'm after. These parts are functionally correct and worked perfectly on
Plasti-Kote seems to hold color covers better than the Dupli-color. My
motor was originally painted with the D-C paint it faded considerably in
a year. The P-K has been on for a year looks just like new. I don't
have any experience with any of the POR products, so I can't comment on them.
IMO you'll be better off with the Plasti-kote brand.
At 12:09 PM 12/12/2005, you wrote:
My crate engine came black but every Chevy I have seen is orange. Does
anyone have experience with Dupli-Color 500 degree Engine Enamel? It
comes in Chevrolet Orange DE1620 spray cans. Is it a correct
if anyone wants to commit suicide and use me and
the chevelle for a weapon, fine by me.
gotta love Marine Corps training
:)
Bill Bradley
67 Malibu
Edmond Oklahoma
Semper Fi!
- Original Message -
From:
Larry Shouse
To: The Chevelle Mailing List
Sent: Monday, December 05
thats my kinda packrat!
- Original Message -
From:
Jim
To: The Chevelle Mailing List
Sent: Monday, December 05, 2005 7:20
PM
Subject: [Chevelle-list] was Ebay 70 LS6
Convert; now more older Chevs
Here's another interesting story, which broke here in
A-Men Clint!
- Original Message -
From: Clint Hooper [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Tuesday, December 06, 2005 2:04 PM
Subject: Re: [Chevelle-list] Chevelle Security
Deadly force is authorized if you threaten me or my family with
Vigilance and prayer. It's only parked left at car shows or
cruise-ins, so I don't worry about it too much. I pulled the coil
wire out 2 years ago when my wife I went to a shopping center in
Goodlettesville when we were at Chevelle-a-bration. My car's not
worth killing someone for it.
BillL
Can you tell me a little about Chevellabration? Is it like a weekend of
Chevelles and owners, swap meet, cruise, etc?
This probably says it best--
http://www.chevelles.com/forums/showthread.php?t=94514highlight=story
BillL
Any of ya'll have a set (4) of the clips that attach to the headliner to
hold the shoulder straps on a 68 or 69? Please email me off-list if you do
with prices.
Thanks,
BillL
I've forgotten who said it, but it's
true The very rich are different from the rest of us.
BillL
I'm not saying these prices are
right but don't you think if someone is paying that kind of money for a
car they wouldn't have the documentation checked out? Bottom line is
Some people have money to
I like this guy. He knows what he has he knows what he wants
for it, he might be right as to its value. I doubt that it'll
sell on Ebay, I figure he's using this for advertising hopes to
find a private buyer. The QA is funny.
BillL
At 01:51 PM 12/3/2005, you wrote:
Guys
want a good chuckle ?
or higher.
Bill Vander Werf
- Original Message -
From: J. Brady [EMAIL PROTECTED]
To: Chevelle Group chevelle-list@chevelles.net
Sent: Monday, November 28, 2005 4:24 PM
Subject: [Chevelle-list] 3.73 or 4.56?
OK folks,
I have the opportunity to use 3.73 or 4.56 gears in
the 10-bolt posi
hey Clint
the ONLY thing i miss are the trees, the crime and
humidity they can keep!
Bill
Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Saturday, November 26, 2005 6:30
PM
Subject: Re: [Chevelle
I think I remember from my drag racing days that Mark Williams probably
some others had a steel replacement cap for 12 bolts that made the rear
stronger. I don't think that you had to do any machining to use these
caps. If you aren't using it for a racing application, I would think that
you
Are you positive about that? Here's the MW deal, I found my old
catalog, it says nothing about any machining.
http://www.markwilliams.com/esell/prodlist.asp?catid=1028
BillL
At 09:35 PM 11/27/2005, you wrote:
Any
cap but the original would have to be machined
Larry (Z)
hey Dan, i have family in the valley and being from
Houston i feel like a yankee up here in Oklahoma
Bill Bradley
67 Malibu
Edmond Oklahoma
- Original Message -
From:
Dan
Mascheck
To: 'The Chevelle Mailing List'
Sent: Friday, November 25, 2005 7:24
PM
Subject
.
the bitching stops when i'm 6 foot
under.
thanks for your tollerance, feel FREE to
bitch.
Bill Bradley
Edmond Oklahoma
Marine combat vet
Chevelle owner
spoiled American and proud of it
- Original Message -
From:
Larry
Shouse
To: The Chevelle Mailing List
Sent: Tuesday, November
HELPS the government because it allows them to pay YOU back
with dollars that have been "devalued"...that is, they are worth less than
the dollars you loaned them when you bought the bond, T-bill, T-note,
etc.
All you Vietnam era vets and citizens might remember
hey Mike
no need to apologize
thank you!
Bill
- Original Message -
From: mike f [EMAIL PROTECTED]
To: The Chevelle Mailing List Chevelle-list@chevelles.net
Sent: Wednesday, November 23, 2005 6:17 PM
Subject: Re: [Chevelle-list] Anyone home? {public apology}
I wrote a scathing email
The pickup should be around 1/4" from the bottom of
the pan.
Bill Vander Werf
- Original Message -
From:
Jimmy C.
To: Chevelle Forum
Sent: Wednesday, November 23, 2005 11:28
PM
Subject: [Chevelle-list] oil pan
hey Guys, I need some more advise :o)
i was once a "pert" , do i
qualify?
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Monday, November 21, 2005 11:46
PM
Subject: Re: [Chevelle-list] Anyone
home?
ok ok somebody has got to step and be the expert
Got the exact email today. My email program (Eudora) is acting
weird too, it wants me to enter my password every time it gets
mail.
BillL
At 12:44 PM 11/22/2005, you wrote:
FYI
I have rec'd these from the FBI as well.
?xml:namespace prefix = o /
Delete the e-mail if you get
it!
Dont open
Actually, the spider gears can allow both tires to rotate. If it's a
positraction, both wheels will rotate in the same direction. If it's not,
then one wheel will rotate clockwise, the other wheel will rotate
counterclockwise.
BillL
At 12:33 PM 11/19/2005, you wrote:
To tell if it's posi,
RICHARDSON IS THE BEST ON THE MARKET.ANY SPEED SHOP SHOULD BE ABLE TO
ORDER THEM. I HAVE A RICHARDSON 308 IN MY 70 SS BIG BLOCK. QUITE AS AS
MOUSE...BILL
-Original Message-
From: J. Brady [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 19, 2005 12:09 PM
To: Chevelle Group
Subject
At 01:15 PM 11/15/2005, you wrote:
I have
never been to Chevellabration, but am planning on going in 2006 (and
hoping our Chevelle will be ready by then). How far ahead does one
need to make reservations ? Is it best to go through ACES ? (I am a
member.)
Thanks.
Does anyone have any information concerning mini-starters cracking in
the bolt holes on big blocks. Have to use mini's because of headers.
Thanks, Bill
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, November 14, 2005 11
You do realize that a 4 speed will not change the engine speed don't
you? 4th gear is 1:1 just like 3rd is 1:1 in the
automatic. You'll have to get a 5 speed to have an overdrive.
BillL
At 08:29 AM 11/2/2005, you wrote:
I was
using the stock 3:21..350 with auto..then I had the engine built to
http://www.popularmechanics.com/automotive/sub_care_sat/1272436.html
did i hear BEER?
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Monday, October 31, 2005 5:32
AM
Subject: Re: [Chevelle-list] I'm back on
the list
Welcome back Andre:
I'm sorry to hear about your bad experiences with
I you have a good, rust free, right door for a 69 are willing to sell,
let me know. A buddy needs one for his car. you can email me off-list
[EMAIL PROTECTED]
Thanks,
BillL
At 08:56 AM 10/30/2005, you wrote:
Picked up 6 trunk lids and 8 doors ( 4 each drivers Passenger) this
morning from
301 - 400 of 1173 matches
Mail list logo
