hi
i have started debugg on serial and ethernet
interface.
ie.
debug serial interface
debug seral packet
debug ethernet-inetrface
!
interface Serial0/0
description 2Mbps Link To devaurs
ip address 10.254.2.37 255.255.255.252
no ip route-cache
no ip mroute-cache
bandwidth 2048
!
The same
I am trying to connect two routers via back-to-back Adtran DSU III AR and
an Adtran 56/64 DSU and am not having any luck. I've set the clock to MASTER
on the DSU III and set both to 56K, but still get open loop on the DSU III.
I made (and tested) the cable with 12-45 crossover, but didn't use
Perhaps this will shed some light...no pun intended.
Watch the wrap:
http://www.redherring.com/insider/2000/0804/tech-ciscowatch080400.html
--- "m. jean stockton" [EMAIL PROTECTED] wrote:
are wireless the networks of the future? if so, how
will cisco be prepared
for it?
mjs, ccna
Well,
Threw out that BGP4 confussion I had, and thought I would pass on some
info:
Fairly new GSR bug {August 3rd}.
http://www.securityfocus.com/frames/?content=/vdb/bottom.html%3Fvid%3D1541
And for general Cisco IOS bugs:
Please remomve me from your mailing lists.
Thanks Regards
TC Lim
-Original Message-
From: Mata [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 07, 2000 1:25 PM
To: [EMAIL PROTECTED]
Subject: Routing IP and bridging IPX
I've got 2621 router connected to a 2610 router via the serial
I guess your problem is that now the computers on one network cannot see
those on opposite network right? Anyhow, Novell 3.X and 4.X require the
same identical EXTERNAL network numbers. By the looks of what you have
given us you need to revert the 887 network back to 888. Make sure your
frame
Hey folks,I am going through the rsh commands
on a 25xx router trying to figure out how I can get it to work with my NT server command prompt. I have been unable to get this
to work thus far using numerous permutations and
do not know why. Please look at the commands I used below and see if
basically bgp, and the ip addresses are class C addresses, which our network
have class C addresses as well. We are an ISP, and my partner is a system
integrator.
""McCallum, Robert"" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
.uk...
Firstly, we would all need to know what
hey :)
if it was line 1...
wouldnt it be
line 0
as oposed to line 1.. ??
On Sun, 6 Aug 2000, Chuck wrote:
I know that this is a trivial question, but I want to see that I get these
questions and commands down pat. The Sybex CCNA 2.0 Study Guide text poses
this question.
Q."How do you
On Sun, 6 Aug 2000, Tim Ross wrote:
I am trying to connect two routers via back-to-back Adtran DSU III AR and
an Adtran 56/64 DSU and am not having any luck. I've set the clock to MASTER
on the DSU III and set both to 56K, but still get open loop on the DSU III.
I made (and tested) the
--- "Chris C. Burton" [EMAIL PROTECTED] wrote: What are some
good books to read if any for the the Cisco PIX
security test?
Chris
There are some study notes here:
http://cramsession.brainbuzz.com/cramsession/cisco/cspff/
=
Ben Lovegrove, CCNP
Redspan Solutions Ltd
With respect for the fact that this is a cisco list I
would still like to point out that it is precisely
because of the cpu intensive nature of crypto that the
most popular solution is not a router per se but a
dedicated VPN box such as the Nortel Contivity.
For the curious:
In a message dated 8/7/00 3:12:48 AM Eastern Daylight Time, [EMAIL PROTECTED]
writes:
hey :)
if it was line 1...
wouldnt it be
line 0
as oposed to line 1.. ??
Actually there are 5 sessions, 0,1,2,3,4. So if they asked you for a pass for
line 1 then they don't mean 0. :)
Mark
Hi
I am sniffing my traffic and realised that this 2 MAC address occupy 95% of
my traffic
00:00:01:01:01 - 00:00:FF:FF:FF:FF
Does anyone know what is this type of MAC address? doesn't seems like some
vendor NIC card
My network nowaday is very slow and surfing often timeout (the internet line
is
Just
make the "a" in the administrator capital and it will work. Like this
;
routerb(config)#ip rcmd remote-host Administrator
148.1.1.2 Administrator enable
Regards
Atif
P.S:
you do not need a username configured. It works without that too. Also you need
not enable rcp if youonly
hi all
anyone knows what a hssi interface in router does??
thanks in advance
Jason
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and
Yes its that IS-IS question again.
I am at the moment working on a National Management Network. Marconi
telecomms switches (SDH muxes) only talk to each other using the favourite
IS-IS protocol. Most of the design features / problems have been done BUT
there is one question that remains
Hi Gang,
Does anyone know where I can get a decent white
paper comparing these two firewall solutions from a
neutral standpoint ?
I've been in a meeting recently where it has been
claimed that we would always prefer Firewall-1 to PIX.
Would anyone like to comment technically why
Jean,
IMNSHO, wireless will definitely be more of a factor in the networks of the future.
Cisco are well prepared for it - and they've formed some pretty groovy alliances with
wireless vendors such as Motorola to lead the way towards wireless convergence.
Their broadband offering is through
Hi Steve,
Use the snmp-server trap-source interface command.
The ip address of the interface specified in the above CLI will be used
as the source address in the outgoing IP header and as the "embedded
address held within the data field of the packet".
Thanks,
Nalin
Steve Nelson wrote:
All,
On Mon, 7 Aug 2000, Jason wrote:
hi all
anyone knows what a hssi interface in router does??
About 50 Mb/s.
It's a High Speed Serial Interface. Connector is the same as small-format
50-pin SCSI. Most commonly used with an external DS-3 CSU/DSU for 45 Mb/s
circuits. Can go as high as 52
Hello Guys,
If any of you have CVOICE Course Material, I would like to exchange with
CATM Course Material.
Thanks
Raghu (CNE / MCSE / CCNA / CCNP / CATM)
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and
Going off of the off topic...
Does anyone know about life in Southern New Ha,mpshire - networking
opportunities, quality of life, etc...
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Each lan has to have its own IPX network number. Then on the serial
interfaces of your routers (or subinterfaces), you have to have an ipx
network on those as well. On the serial interfaces though, the ipx network
number has to be the SAME between two sites. You also need to make sure
you're
Hello,
I will attend Networker in Paris next September. Unfortunately I will be alone so I am
looking for "single" or group to join in order to share some fun and knowledge.
If you are interested please contact me by email.
Regards,
Cesare
--
TiscaliFreeNet, libero accesso ad Internet.
Answeres C and D will both meed the requirments mentioned. There are FIVE
available VTY ports (0,1,2,3,4) , if they asked for 1 then then meant 1.
Kornel
-Original Message-
From: Chuck [SMTP:[EMAIL PROTECTED]]
Sent: Sunday, August 06, 2000 11:13 PM
To: Cisco@Groupstudy.
anyone took this exam? what topics it's covered?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Is it possible to edit only one line of an access list without removing the entire
ACL. I heard that it is possible now with having
to cut and paste. Can you advise.
Thanks,
Scott
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ,
copy the list on your local pc edit the lines you want out then re-tftp it if I'm not
mistaken. Also remember to check the bottom line and make sure everything is in order
minus the line you deleted. If your on a Unix sys you can use the diff command to make
sure nothing but the deleted entry
I suggest ignoring altogether what was in or not in exam. I presumed on
advice from Bcran book and was
taken aback to find it in the exam (2 weeks ago) Cover yourself and learn
the full agenda.
Pat Duggan
-Original Message-
From: NoOneYouKnow [mailto:[EMAIL PROTECTED]]
Sent: Friday,
Have you try to use Cisco ConfigMaker, it can download router config file
and display in CM. So you can edit ACL in CM and after you modified upload
back to router.
Hope this help.
$$$ Surf the web and get paid $$$
Did I miss anything troubleshooting wise ?
define What
facts When
analyze Why
plan Whichway
implementWork
evaluateWonder
resolution Wesult ( sorry Barbara Walters )
document Write
the 8 step road to trouble shooting success
You need
Hi Yah,
I'm working for Conexion in Europe : we supply transit IP service and "just"
bandwidth as well. Most of our connections are NO SYNC because we use Route
Reflector or confedarations to get lost of the full-mesh approach in BGP.
So if you have a "healthy" provider he's going to built his
Since this is a Cisco list, Robert, the least you could have done is name
the Cisco CVPN ( formerly Altiga ) boxes! :-
Say, where you been? Haven't seen your name here in several months. Good to
hear from you. I'm still eating my blueberries! :-
Other dedicated VPN boxes include VPNet (
Typically what I do, is do a wri t, copy the acl's to notepad, edit the
lines that I want to change, copy that to the clipboard, on the router, say
'no access-list xxx', then edit and paste. Just keep in mind that if you
are accessing it remotely and removing the entire access-list will cut your
Phil,
I would imagine that the preference for Firewall-1 was expressed
because the administration of it is far more user friendly that a PIX.
Admin of FW-1 can be carried out using a Windows GUI with all the rules
laid out in glorious technicolour, while admin of a PIX involves a CLI
(command
basically bgp, and the ip addresses are class C addresses, which our network
have class C addresses as well. We are an ISP, and my partner is a system
integrator.
First, if you expect to play seriously in the ISP space, you need to
get used to thinking of them as /24 prefixes, not class C,
Yes its that IS-IS question again.
I am at the moment working on a National Management Network. Marconi
telecomms switches (SDH muxes) only talk to each other using the favourite
IS-IS protocol. Most of the design features / problems have been done BUT
there is one question that remains
In Word you could create your own custom.dic, otherwise I don't know of any.
From: "Oz" [EMAIL PROTECTED]
Reply-To: "Oz" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Technical Book Editing
Date: Mon, 7 Aug 2000 09:57:38 -0400
On this topic is there such a think a technical add on for
HI,
I have strange problem with one of my customer
router. The users in the branch will not be able to connect to the HO for
sometimes and when I checked the serial it shows (serial is up and line protocol
is up) but when I gave(show ip route) I could not see the branch n/w subnet
route, I
Hey, Ben, I have recently sat in different seminars sponsored by Cisco and
Checkpoint. From statements made by the presenters, I gathered that both
companies agree on the following points:
1) Cisco PIX is far superior in terms of throughput.
2) Checkpoint GUI / management, particularly of
Also the hated ones (Nortel) have a fairly good VPN box that seems to work
ok. About the only real problem I have had with it is the interface is GUI
only also they say they are working on a BCR (blatant Cisco rip-off) command
line also.
As to VPN's being to cpu intensive, at our corporate
I follow this rule all the time too. BUT I have never been cut off when
deleting the existing access-list. I do it remotely all the time!
-Original Message-
From: David Jones [mailto:[EMAIL PROTECTED]]
Sent: 07 August 2000 15:46
To: 'STRAND Scott'; [EMAIL PROTECTED]
Subject: RE:
you can copy the acl to your PC , edit the lines you want, delete the acl in
the router , and then paste it in the router
a word of advice if you are not connected to the console port , first
disable the acl in the ports of the router , paste the acl , and then
activate the acl . to avoid
If it is Southern NH, you at least can end up with
many places in Northern Mass.
Kent
--- Timothy Harkin [EMAIL PROTECTED] wrote:
Going off of the off topic...
Does anyone know about life in Southern New
Ha,mpshire - networking
opportunities, quality of life, etc...
I
would be concerned with the CRC's and input errors. It looks like there
may be a issue with the circuit, cable? Just something to check
out. It looks like the counters were cleared 4 days ago and with the
amount of data going through this interface the number of CRC's is worth looking
Also the hated ones (Nortel) have a fairly good VPN box that seems to work
ok. About the only real problem I have had with it is the interface is GUI
only also they say they are working on a BCR (blatant Cisco rip-off) command
line also.
Harrumph from the hated side. Yes, I agree, I hate
My understanding is there is some software that makes it much easier to
configure a PIX. My company has an NFR on order now. Will have to wait
until I get it to see how good it is. I'll update this list after I test it
out. Just FYI.
Dave
-Original Message-
From: Ben Lovegrove
Can
you just use a static route and see if that has any affect?
Dave
-Original Message-From: msasif
[mailto:[EMAIL PROTECTED]]Sent: Monday, August 07, 2000 11:15
AMTo: [EMAIL PROTECTED]Subject: SERIAL is UP, but no
routes to destn
HI,
I have strange problem with one of
Yup thats about what I found playing with both
And checkpoint has some nice features and does dubbuging for you .
And lot cheaper to play around on a NT box AIX SUN than a PIX box..
Oz
1) Cisco PIX is far superior in terms of throughput.
2) Checkpoint GUI / management, particularly of
Hi
Can anybody tell me what is the best way to start preparing for CCNA 2.0
I have the complete material for CCNA 1.0 but at that time I could not
study.
Everybody says, CCNA 1.0 and 2.0 are totally different and I need to buy new
books and all. I have access to a 7200 router.
I am looking for a software based traffic generator. Any suggestions,
comments, warnings, etc.TIA
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___
UPDATED
Hi,
Does anyone know a company who rents a rack of routers for studing
for the ccie lab?
Thanks
--
Andrea Timpanaro
CCNP
Email: [EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription
Could someone please explain to me (or tell me where I may be able to
find info.) what "T-bid time" is pertaining to FDDI.
Any help/comments are appreciated
Thanks
Rahul
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives,
I stand corected.
BPDU's are multicast and the source address is
01:80:c2:00:00:00
Sorry for the confusion.
Duck
Hi
!
Am planning to take
my CCIE-Qual exam next week...I have a few clarifications reg that..Could
someone pls help me..
1. Do we need to
study VoIP VoFr ?
2. Do we need to
study VPN IPSec?
3. What is the
passing score for the exam ?.
4. What are all the
important areas to
I haven't seen any free t-shirts or books in a
while? Does anyone have any links?
hey,
good luck to you in your test! knock 'em dead!
Chuck
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Cisco GroupSent:
Monday, August 07, 2000 9:48 AMTo:
[EMAIL PROTECTED]Subject: CCIE-Qual...
Hi
!
Am planning to
take
SNIP
" everyone seemed to at least have an MCSE before attempting the cisco
route. Is this highly essential to succeed? "
SNIP
No, I dont believe it is highly essential... however, I believe most that
working in the Networking Infrastructure area have been brought up through
the LAN/Server
Thanks to everyone in the group... I passed CID this morning which completes
the CCDP track.
I completed the test in one hour They provide two hours to obtain a
minimum 65% on 100 questions.
To study, I used only the Cisco Press Books "Cisco Internetwork Design",
and followed this up with
Hi,
I've been asked to do the MCNS (v2.0) exam 640-422
on Wednesday.
There are no examguidelineson the
training web-site.
Any of you folks out there sat the test
yet?
Can you give me pointers on which areas to
focus.
Also, does anyone know what the pass mark is and
whether the test is
SNIP
" everyone seemed to at least have an MCSE before attempting the cisco
route. Is this highly essential to succeed? "
SNIP
Let's see...I can set the IP parameters on a Windows host. I have a
reasonable understanding of the traffic effects. System
administration on Windows? Nahhh.
UNIX,
does anyone have a model for bandwidth forecasting based upon user
classification (ie. Residential vs SOHO vs Business)? TIA.
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
You can rent lab time at www.nantech.com ..very reasonable prices :). As for
physically having the equipment in your house, I doubt you'll be very
pleased with the rates if you do find someone to rent from
Nnanna
--
www.nantech.com
online lab for CCIE preparation
"timand" [EMAIL PROTECTED]
How come the only time we hear from IAN is to yell about HTML.
I dont even know what that is can anybody tell me
DUCK
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Imran,
I am
no expert but would to put in my 0.02.
Do you
have logging setup on the HO router? Had the serial interface went down
and came back up. Is the branch connect to any other subnet? If not, maybe
you could use a static route and see what happens. But first check the log
of both
Likelihood of passing without ECP1? 10-20% first time is average. With ECP1, maybe 30
or 40 given good prep and a favour able exam. Cost of doing test? 1000 Travel, 1000
Lab, 2000+ lost work or billing, ??? lost to concentration on test instead of work.
Seems to justify an extra couple k
Haven't taken the exam but there's an outline for the MCNS course on the
Cisco site.
http://www.cisco.com/pcgi-bin/front.x/wwtraining/course_description.pl?Course=TRN-MCNSVersion=2.0From=Network_Management
watch the word wrap
Karen E Young
Network Engineer
ELF Technologies, Inc
[EMAIL
Dear friends,
I have Vlan with access list problem on my 5505 back bone switch, Pls
help me.
Conf shown below
5505 switch A
##
interface Vlan2
ip address 57.198.170.251 255.255.255.0
ip broadcast-address 57.198.170.255
ip access-group 100 in
no ip redirects
standby 1 priority 100
most networks (small and medium size business/networks) use NT. So mcse is good
to have, especially if your new in the field. In the MCSE course they'll tell u
a bit about networking, ie packets, frame headers and suchput it this way,
if u dident know that sorta stuff, and when u take the
Looking for the following cisco course material:
(1) AS5200 configuration and installation
(2) MCNS - Managing Cisco Network Security
..if you have them and are willing to trade or
anything please get in touch with me @
[EMAIL PROTECTED]
i have a lot of study material, let me know what you
are
__
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
In a message dated 8/7/00 3:30:02 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Haven't taken the exam but there's an outline for the MCNS course on the
Cisco site.
http://www.cisco.com/pcgi-bin/front.x/wwtraining/course_description.pl?Course=
TRN-MCNSVersion=2.0From=Network_Management
www.ccbootcamp.com
BEST ONLINE RACK around. Not to mention his labs are fabulous!
-Brad Ellis
CCIE#5796
"timand" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Does anyone know a company who rents a rack of routers for studing
for the ccie lab?
- Original Message -
From: "Adedapo Ola" [EMAIL PROTECTED]
To: "Howard C. Berkowitz" [EMAIL PROTECTED]
Sent: Monday, August 07, 2000 3:56 PM
Subject: Re: Cisco Prerequisites
Point well understood. I have been reading through the basics of
networking
and can frankly say, knowledge is
1. If you are trying to block access to both of the
rsms then yes.
2. In the HSRP statment the highest priority will be
the active gateway. in this case Router A will be the
active gateway. In your config you show both with
priority 100. Pick which router you want to be active
and set its
Besides, I think ForeFront (now SmartCertify) sales guys are TOO PUSHY AND
PERSISTENT - they kept calling me repeatedly inspite of the fact that I got
really annoyed with them and clearly asked
them never to call me again and that I'm NOT interested at all in their
product any more.
I write this
Besides, I think ForeFront (now SmartCertify) sales guys are TOO PUSHY AND
PERSISTENT - they kept calling me repeatedly inspite of the fact that I got
really annoyed with them and clearly asked
them never to call me again and that I'm NOT interested at all in their
product any more.
I write this
Hi there
Please stop sending messages to [EMAIL PROTECTED]
Not to fear , I will be subscribing in a day or two from my new work mail
address .
Regards
Olden
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and
You can it yourself by going to www.groupstudy.com.
--
Regards,
---
Marco Paulo Rodrigues
Unix Administrator
Axxent Corporation
Email: [EMAIL PROTECTED]
CompTia: A+, Network+, i-Net+
Cisco: CCDA
Guys,
Your help is required.
I am sick to the back teeth with the UK and want out!
any advise on where to go ,moving over,places with good job ops.
or anything else.
Thanks in advance
Steve Skinner
MCSE ,CCNA ,CCDA ,PSS ,ACT ,CLS
Dear Friends,
I have some question on 5505 back bone switches, pls help me
1)I received 2 configuration file of the 5505 switch from my tokyo
counterpart. One of them is show
A 5505#sh conf
another is
B 5505 (enable) sh conf
which one is the correct syntax to show the configuration
Actually, I think the question meant: What is the 1st line of command you
should enter to assign the telnet password bob.
hence, "line vty 0 4"
I just checked the book. Hope this helps. If it was phrased the way you
thought it was, then your answer is correct.
""Chuck"" [EMAIL PROTECTED]
Just depends on the access-list. I've had to have a user reboot the router
for me ONCE. I learned my lesson to check the list out before I make that
kind of change.
Dave
-Original Message-
From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 07, 2000 11:13 AM
To:
Try the big cities like Chicago, LA, San Jose, Texas, Dallas, although I
don't live in any of these cities, just by visiting, I think LA is pretty
nice. I just moved from Chicago and the job market there is pretty big.
You'll have to endure the cold winter though which sucks.
""Stephen
Hi list
I am putting together the plan of attack on passing
the R/S lab, I have quite a lab at work and can work
most of the labs on my own, however, I would like to
take a training when I am about ready to reinforce and
hard code the approaches to the labs. Basically I wish
to have some
try www.shunra.com
""Timothy Harkin"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am looking for a software based traffic generator. Any suggestions,
comments, warnings, etc.TIA
Checkpoint is an OK firewall and is actually an excellent firewall when run off of
Nokia's IP400 series. I definitely wouldn't use it on NT since I hate Windows as it is
and under Sun is the choice out of Sun, NT, or AIX.
As for Cisco Pix that too is pretty nice and the only reason I would go
It was easy, and it even allows mark. I took CATM class from Jul 24-28, and
then my boss asked me to be on-call 24x7 for a week until 8/4. Read course
materials for the whole weekend. Took exam this afternoon. Everything you
need is in the course materials. Not many real commands, mostly theory.
See if you can start using "prefix-list"s as you can change particular
lines of code without taking out the whole prefix-list.
(just space out your "seq" as you need to leave enough room for growth and
editing)
You can also start using extended access-lists, certain IOS(12?) versions
allow you
What are you seeing in the way of CPU usage during business hours? Are your
results along the lines of what the Cisco document I quoted is indicating?
Also, when you say you have 6 offices terminating, I presume you are doing
frame relay. What are your port speeds and CIRs? The Cisco doc is
what book did you use?
""Sean Wu"" [EMAIL PROTECTED] wrote in message
8mnbkj$p0f$[EMAIL PROTECTED]">news:8mnbkj$p0f$[EMAIL PROTECTED]...
It was easy, and it even allows mark. I took CATM class from Jul 24-28,
and
then my boss asked me to be on-call 24x7 for a week until 8/4. Read course
What the heck. I'll throw in my two cents.
I think the answer is "none of the above". :-)
Here are the steps I think would happen:
1) .18 host checks if 192.168.1.255 is on local
subnet. It is not. So,
2) .18 host sends packet to proper gateway. Assume
there's only one gateway defined
Ladies and Gentleman,
Thank you all for the info on DNCP over a WAN Link. It worked like a
charm. Now my next goal is to set it up for our internal networking using
VLANs. I have included the important parts of the router config for anyone
else that would like to set it up. Thanks
Hi, everybuddy:
Just want to let all of you know that I passed CCIE written the first try
today with a score of 75%, although not skyhigh, but I'm happy It's behind
me now, from now on I can focus on my LAB prep. ^_^ My test software crashed
once during my test, lucky thing I didn't lose the
Currently the CPU usage at the central office is topping out at around 30 to
40 percent. The router itself is terminating 2 frame connections with a
256k cir burstable to 1.5meg the other 4 connections are coming in over a
7/1meg DSL connection.
I believe that Cisco in, it's usual fashion, is
In Todd Lammle's book for CCNA 640-407, on p. 202 he has set a default route
of BOTH 172.16.40.2 and 172.16.20.1. How does one do this, just enter the
IP route command as such, one right after the other (??):
ip route 0.0.0.0 0.0.0.0 162.16.40.2
ip route 0.0.0.0 0.0.0.0 162.16.20.1
???
The
Hello Everyone,
I am having an issue with configuring my Frame Relay Switch. This seemed to
have worked before I physically moved the equipment. The reason I say this
is because typing 'show frame-relay pvc' from the switch produces PVC STATUS
= INACTIVE now after the move.
Could my ports be
Great job, I will be joining your ranks by Wednesday thanks to the great
insight this group has provided... Only the CIT is left!
Jim Croyle
Network Engineer
-Original Message-
From: Ed Moss [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 07, 2000 1:26 PM
To: [EMAIL PROTECTED]
Subject:
It does work thanks to a few, all you have to do is setup a user in Win2000
pro and
make sure both machines are in the same workgroup and with the 95/98 make
sure you don't have login into Domain click in network properties. Make sure
both machines are on the same subnet to.
Brian
1 - 100 of 121 matches
Mail list logo