Found this on one of the newsgroup... Might be good to forward this to your
friends. I encounter the same problem and thought I was the only one until I
saw the following Do a search on Google, etc about Paypal scam and you
will see a few other similar sites !! Be WARNED.
--
BRE
Jason wrote:
>
> Found this on one of the newsgroup... Might be good to forward this to your
> friends. I encounter the same problem and thought I was the only one until
I
> saw the following Do a search on Google, etc about Paypal scam and you
> will see a few other similar sites !! Be WARNE
Greetings to all
I have this router (Router A) which is sitting in between the CP firewall and
my internal network. I would like to do some traffic prioritization such
that
there will be equal weightage of traffic for the following groups:
1) Group 1 users which was assigned one range of contigu
Hi ,
I am facing a problem on my Cisco router which is connected to the ISDN
, I have got a static IP address and I am not able to telnet in to the
router as my NAT is enabled for the ethernet , but once I remove the NAT
from both the bri and ethernet interface , I am able to telnet into it
As I suspected - check your router D routing table.
this one is a classic problem, and one you MUST be able to solve in advanced
studies.
the question remains - why is it that IGRP is not seeing the subnets out of
the OSPF domain? How do you correct the problem?
My previous posts contained some
Does anyone know which CENTER for preparation LAB CCIE
is the best all and secure ?
Joselito
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28524&t=28524
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/l
Joselito Nuqez wrote:
> Does anyone know which CENTER for preparation LAB CCIE
> is the best all and secure ?
>
> Joselito
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28525&t=28525
--
FAQ, list archives, and subscription inf
When running STP, can fast etherchannel or giga etherchannel can't be
implemented??
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28526&t=28526
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
Sorry, I spelled my name wrong in the previous URL. ;-)
Please check out my CIT Flash Cards.
Let me know if you see any weird typos. The hard disk that serves these Web
pages if flaky. Thanks.
Assuming the GroupStudy software doesn't filter out this text, the URL for
the Flash Cards is as fol
I disagree Priscilla, a girl above 18 years should be politely addressed as
a lady, the eviable title WOMAN is reserved only for the lady that is under
a MAN. Do not hastely overlook the suffix ---MAN, when writing WOMAN. If
they are many then they would be called WOMEN still from the root word ME
Please contact me off line.
I live in the extreme North Bay ( San Francisco area ), but telnet plus
Instant Messenger kinds of cooperation are possible.
Chuck
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28529&t=28529
--
FAQ
Hello,
When configuring partial frame-relay, say a 256k line, is the only command
you have to add to the interface (assuming you have the default frame-relay
stuff for a full t1):
service-module t1 timeslots 1-4 speed 64
Also, do I need to set the clock source as the line if its less than a
1.5
Hi,
I need your help. I've got two job offers, one from an oil company, and
another from a large solution integrator.
Please help me to choose between them. My mind is stuck. I'm not able to
think about it again. Please help me.
Ehab
Message Posted at:
http://www.groupstudy.com/form
This is just as easy as if you need to decide to run BGP or static route.
1) Is money important to you? if so, take the job that offers you higher
salary.
2) Is learning/experience more is more fun for you? if so, take the job
that you will think will allow you to play with more gears.
3) Is sex
I second your opinions. BRAVO!!
- Original Message -
From: "Frank Kim"
To: "eFamily"
Cc: ;
Sent: Saturday, December 08, 2001 4:29 PM
Subject: Re: Which is better?...
> This is just as easy as if you need to decide to run BGP or static route.
>
> 1) Is money important to you?
How about the one with free food and the better severance package?
Lol hehe
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Saturday, December 08, 2001 2:00 PM
To: Frank Kim; eFamily
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Which is better?...
I
Hi Priscilla
Thank you for your effort. It was a new router I just wanted to get it up
and running, further I didn't want to experiment with it .On Monday I am
planning to do it from the scratch.
BTW , does the christal ball method work well for you ?.
Suranjith
Message Posted at:
http://www
Please check out my CIT Flash Cards.
Let me know if you see any weird typos. The hard disk that serves these Web
pages if flaky. Thanks.
Assuming the GroupStudy software doesn't filter out this text, the URL for
the Flash Cards is as follows:
http://www.prisiclla.com/cit/toc.html
Priscilla
You can implement fast/gigabit EtherChannels in a STP environment. One of
the benefits to F/GEC is that it can take redundant paths between switches
and make them appear to STP as a single link (thus no blocking). Don't
believe the hype entirely about the performance benefits. Because of the
wa
yes it is. I have one and it works fine as a frame switch AND router with
isdn, serial, and token ring. A great multi-purpose device, and usually
cheaper than a 2522.
- Original Message -
From: "Ham web"
To:
Sent: Friday, November 30, 2001 3:39 AM
Subject: Home lab - 2523 [7:27788]
now, if it only had sound and a little bit of color, it would be really
great! I tried imagining the music in the background, but that just didn't
work.
> I'm not in any way a trekky but was curious from all the questions. I
> telneted to the site via teraterm and it, whatever it is, worked!!!
> I have never seen any commands in the IOS that can simulate an BRI ISDN
> switch. Please can you submit an example config, cisco URL or a command
> which can do this?
How much research have you done on the subject? If you search the archives
(the link is at the footer of this email) you'll fin
I counted 23 exclamation points. Is that a record for a
[EMAIL PROTECTED] post?
- Original Message -
From: "SA J"
> Mr. Chuck!!!
> As for ur information! i have already did all the
> practicals of BCRAN in Lab & also read the book
> thoroughly & have all the concepts clear!! i can clear
This is from Cisco Oct 2001 Packet..
http://www.cisco.com/warp/public/784/packet/oct01/p76-training.html
It must be out of date :-)
-Anil
5. Session Layer
The session layer provides services in the application to manage inter-host
communication. Think of this function as
Hello all,
I am not new to the networking field but I have not gotten any
certifications. I purchased a CCNA Study Guide and I feel that it is
lacking the "hands-on" feel. I also, wanted to continue on to get my CCNP
Cert soon. I don't have the resources to purchase my own Cisco routers to
pr
can some one tel me what this comand will do
ip host RouterA 192.8.150.89. 192.6.10.1
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28545&t=28545
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
can some one tel me what this comand will do
ip host RouterA 192.8.150.89. 192.6.10.1
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28546&t=28546
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
yes, correct
- Original Message -
From: anil
To:
Sent: Saturday, December 01, 2001 4:32 PM
Subject: Serial Line is up and line protocol is up ANSWER [7:27930]
> The answer given by CISCO is "A"
> Is this really correct?!
> I hate to doubt the experts, but I just need re-assurance.
> Th
it seems to instruct the device about the ip addresses of RouterA (if u
neglect one dot
at the end of the first IP address)
S A wrote:
> can some one tel me what this comand will do
> ip host RouterA 192.8.150.89. 192.6.10.1
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=
A is the correct answer..my own opinion.
Oletu
- Original Message -
From: anil
To:
Sent: Saturday, December 01, 2001 4:32 PM
Subject: Serial Line is up and line protocol is up Question [7:27929]
> If the show interface serial 0 command is executed and the message Serial
> Line
I have 4 routers with a frame switch inbetween them and configured r1 is the
hub router with 2 dlci with one sub int to r2 and r3 and then 1 dlci with
another sub int going to r4. r3 is the only router with physical interface
and r1,r2,r3 all have sub interfaces and the dlci statements. R3 require
Thank you Cristian
Cristian Piatnitchi wrote:
> it seems to instruct the device about the ip addresses of RouterA (if u
> neglect one dot
> at the end of the first IP address)
>
> S A wrote:
>
> > can some one tel me what this comand will do
> > ip host RouterA 192.8.150.89. 192.6.10.1
Mes
!
I am the record holder!!! Looks just like an image decompressing on a
router.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
EA Louie
I asked the same question from pre-sales, and the answer was 'that's what
the customer has requested', so the whole job has been trying to provide
exactly what they requested.
But... tonight I telnet'd to the office and spent an hour or so changing
back to hybrid code and banking on the fact that
Randy did you try and specify OSPF neighbors? That should solve your
problem.
John Kaberna
CCIE #7146
www.netcginc.com
(415) 750-3800
""McHugh Randy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have 4 routers with a frame switch inbetween them and configured r1 is
the
Dumb question but are you the neighbor command for nbma?
neighbor x.x.x.x
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McHugh Randy
Sent: Saturday, December 08, 2001 4:16 PM
To: [EMAIL PROTECTED]
Subject: OSPF/Frame -Network Type [7:28550]
I have
Hi Navin,
Are you using VLSMed IP's on the router if so try using ip classless, it
solved my problem. if it doesn't send me your conf. b/c i faced similar
problem while connecting to ISDN from Cisco 2501.
Bye
Shakeel Shamsi
M.Sc., MCSE,CCNA,CCNP.
NKP wrote:
>
> Hi ,
> I am facing a problem
Hi group,
What function does the 'dialer' keyword in the 'snapshot server'
command has?? For eg,
snapshot server 5 dialer
As I understand, this keyword is required for snapshot clients to allow
them to dial to servers as only clients dials to servers (Am I right?).
What function it has
Not sure if this addresses the second part of your question or not but...
This creates a dhcp pool on the router, and will hand out your 192.168.1.x
addresses..
ip dhcp pool localpool
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
netbios-name-server x.x.x.x
dns-server
the ip host command serves to create a mini DNS server on the router. it
binds a hostname with an ip address. there might be a number of reasons for
setting things like this up on your router. for example, creating a series
of ip host name bindings for the routers on your network, so that you don'
I am getting this error when I try to access a router from the term server
ts#r1
Trying r1 (1.1.1.1, 2097)...
% Connection refused by remote host
I think I have a session stuck and I cannot get into the router. I know
about the dissconect comand but does any one know how i can clear this
session
Randy -
clear line 97 (as it's shown in your example)
2001 is line 1
2002 is line 2, etc
-e-
- Original Message -
From: "McHugh Randy"
To:
Sent: Saturday, December 08, 2001 7:58 PM
Subject: clearing a terminal server session [7:28560]
> I am getting this error when I try to access a
clear line
And in some cases you might have to execute the command twice
to actually get the line cleared.
Stefan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
McHugh Randy
Sent: Saturday, December 08, 2001 10:59 PM
To: [EMAIL PROTECTED]
Subject: cl
> I am interested in buying the following books, would any one have
> recommendations for these.
>
> Thanks
>
I haven't read the Troubleshooting book, and I didn't know that the CCIE
Practical Studies book was available yet.
> Troubleshooting IP Routing Protocols (CCIE Professional Development)
Enter the command "where" at the term server. That will tell you which line
is which.
Then you can clear what you want
Example:
Term_Serv#where
Conn HostAddress Byte Idle Conn Name
* 1 r7 1.1.1.10 0 r7
2 r8
> about what is needed for the lab. You can also go to
> www.cisco.com/go/cciecentral which will give you an idea of what kind of
> equipments will be in the lab.
Actually, the link is
http://www.cisco.com/warp/public/625/ccie/certifications/routing.html#45
Also, as of 11/15/01, all routers in t
Lately there have been a few posts regarding redistribution
issues between IGRP and OSPF. One in specific had the
following scenario:
R1(IGRP)-R2--(OSPF)--R3
The R1-to-R2 link is 172.16.1.0/24 and the R2 to R3 link is
172.16.2.0/28. Same major network, different subnet masks
nope. show line would be a better command, because if the session did not
originate from that login, the where or sh session command wouldn't show the
used lines.
also, your clear line 1 should actually be discon 1. Clear line 1 will
disconnect line 1, which might not be the same as connection
Does anyone know why I am seeing active pvc's on this hub and spoke frame
relay config and only getting half succesfull pings. I had to delete the
dlci and interfaces and then reload the router because I changed the
interface type from point to multi. Or really just create a new sub
interface. See
Hi Group,
Assume that I have a T1 line that need to be connected to a Windows NT 4.0
server running RAS. The goal is to allow 24 simultaneous call to the server.
What hardware do I need to provide this kind of connectivity?
Do I need 24 serial ports on the server, each connected to an external
m
I want to enable multichassis multilink ppp on three 5400 universal access
servers accepting both analog and ISDN calls i use groups async interface as
a
profile for analog calls and configuring the d channel of PRI to b the
profile
for ISDN calls should i create virtual template and how can i mak
Hi,
Try disabling split-horizon.
- Original Message -
From: "McHugh Randy"
To:
Sent: Saturday, December 08, 2001 10:33 PM
Subject: Frame relay problems [7:28569]
> Does anyone know why I am seeing active pvc's on this hub and spoke frame
> relay config and only getting half succesfull
> Does anyone know why I am seeing active pvc's on this hub and spoke frame
> relay config and only getting half succesfull pings. I had to delete the
yep. remove the frame map statement and disable inverse arp on s0 of r4
(it's causing your failures from/to r1)
For r3, I'm assuming you can pin
This keyword is applied on both server & client, but it works on Clients
only. It is used in conjuntion with dialer map snapshot command, which
directs the string to dial etc.
>From what I understand its just one of the Cisco things, whereby you also
have to put in the dialer keyword (as in Snaps
Most certainly a stuff up due to NAT overload (if you are using) and the
access list. CAn you pl. paste the config so we can help.
Thanks
Nick Shah
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28575&t=28522
--
FAQ, list archive
55 matches
Mail list logo