As far as IBGP next-hop-self is nothing. This is only useful while
injecting the ebgp routes inside an AS. Your config looks OK.
Thanks
Jana.
Firesox wrote:I am having a hard time with configuring
route-reflector-client.
I have the following config on the Route-Reflector-Server router.
router
BGP has the option max-paths which allows to have multiple paths. If it is
ebgp we can also achieve this with ebgp multi-hop.wheather it is max-paths
or multi-hop or static routes most of the time CEF is the ultimate that
influence the interface switching. CEF FIB table will be calculated based on
You should try telenetting 172.1.1.1 2001.
Thanks
John McCartney wrote:Hi all,
I am in need of some help from you guru's with reverse telnet using a 2509.
I haven't had to use it yet and I'm trying to get it working on my home lab.
I set up a 2501_A to reverse telnet into a 2509 and from there
I got one for free, as I have CCO login. This CD worked only temporarily and
now it says License expired. I never told the license is temporary while
installing. Has any one experienced this?.
Thanks
&NBS;"M.C. van den Bovenkamp" wrote: [EMAIL PROTECTED] wrote:
> can the cisco DOC Cd can be do
Hi Paul,
Looks like it is IOS based switch then you have to try some thing like
this..
int Fast x/x
speed 100
duplex full
switchport trunk encapsulation YYY wrote: Hi Paul,
The 3524-XL is not a set based switch. It is an IOS based switch. The
commands would be different.
Brian,
If you have full meshed IBGP sessions then r1 will automatically get the
route to 12.X.X.X in case link to UUNET failed. Or you have to use r1 and r2
as the route reflectors.
Hope this helps,
J.
brian kastor wrote: All,
I have 2 sites. We currently get full routing tables from uunet and
congrats!!.
J.
CJ wrote: Wanted to let the group know my approach to CCIE written and
how I made it.
I got my CCNA in March 2000 (it was a beta )
and CCDA in Dec 2000. and straight to CCIE.
Use the CCNP/DP books to study and practised a lot in my home lab.
Other sourse used
CCIE Routing and
Hi group,
Is there any condition that OSPF area 0 must be contiguous?.
I remembered read this some where on CCO. Is this true?. For a situation,
three ospf routers connected in a triangle shape, what if one of the link
goes down?.
Any one experienced on this situation, please show me some do
OK but without an snail-mail address how are they going to be delievered
Questions Response
Do you own or use any kind of PDA(Personal Digital Assistant)? yes
Do you own or use a digital camera or camcorder? no
Do you own or use a Sony game console such as PS1,PS2 or Gameboy? Yes
Do you
Hi all,
We have a 3640 with E1 interface. I have been asked to
find out if we can use this interface with BRI instead
of PRI, to save costs, as it is only a backup link for
20 people.
Any hints/suggestions welcome.
Cheers,
Symon
__
Do You Yahoo!
conf exist on other side.
thats all..
thanks
--- ElephantChild <[EMAIL PROTECTED]> wrote:
> On Fri, 4 Aug 2000, Cisco Study wrote:
>
> > Hi All,
> >
> > I am getting following error when I started debug
> on
> > my router could any one help me in th
s like this as a result of a
> duplex mismatch between
> >the router interface and the switch port.
> Autonegotiation doesn't always
> >work reliably, especially between vendors. You may
> want to specify the
> >speed and duplex of both the router's interf
! ( the switch by default is auto-auto )
>
> Cumprimentos
> (Regards)
> Rui Fonseca
>
>
>
> > -Mensagem original-
> > De: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]Em nome de Cisco
> > Study
> > Enviada: Sexta-feira, 4 de Agosto de 2000 5:55
AIL PROTECTED]> wrote:
> Looks like your serial line configurations are not
> correct. Do you have this
> router connected to toer router? Check their configs
> also
>
> chuck
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Be
Hi All,
I am getting following error when I started debug on
my router could any one help me in the same..
thanks in adv.
***
Serial0/0: HDLC myseq 8887, mineseen 8887*, yourseen
8917, line up
Serial1/0: HDLC myseq 8887, mineseen 8887*
Hi all,
could any one tell me why collisions counter increases
on ethernet port what should i do to prevent
this.Thanks in adv
*
sh int e 0/0
Ethernet0/0 is up, line protocol is up
Hardware is AmdP2, address is 0010.7be1.6cc1 (bia
001
hi,
i have cisco 3640, 2610 routers and i want to
configure those routers as nas routers so that
any(authorized) one can dial and connect to my
network.
the dial in user connections will be from pstn
telephone line
can any one give me more info on this sub...
thanks in advs
regards
Hi,
i have one basic question that 64 Kbps means 64 kilo
bits per sec. or 64 kilo bytes per sec
thanks in advance
regards,
__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
__
18 matches
Mail list logo