Would the CCNP remote Access exam certification guide for 640-505 by
Brian Morgan and Craig Dennis be enough to pass the 640-605 exam? The
book is kind of short compared to the BCRAN book. Thanks in advance!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=58871t=58871
Hi,
=20
I would like to create virtual dialer downloaded only for the active =
connection.
After the connection the router erase this virtual dialer.
=20
how to get av-pair by radius to router and what's command must i've to =
get it from radius.
=20
I want some attribut download by radius like
After a quick search, here is what I found on the cisco website
http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/1749_pp.htm
Download Information
There are two software images for all Catalyst 3550-24 and 3550-48
products-the Standard Multilayer Software Image (SMI) and the Enhanced
hello guy,
=20
Do U heard about FEC on Routers, if yes with what IOS version we can do =
and our ?
=20
Thanks
Kind Regards.
Thierry.
_ =20
=20
[GroupStudy.com removed an attachment of type image/gif which had a name of
getro.gif]
[GroupStudy.com removed an attachment of type image/gif
Hello,
May i have a link on web Cisco for how to get chassis's serial numbers
because
it's differents According to equipements.
Someone is strange like CISCO7200VXR (show c7200)!!
Kind Regards.
Thierry
Inginieur Support
Support Engineer
Message Posted at:
Nop
you cannot get chassis serial number on C7000 series router without this
command.
how can i get chassis serial on GSR 12000 series Router (show version don't
give it)
-- show c7200 --
Network IO Interrupt Throttling:
throttle count=0, timer count=0
Hello vincent
is not exactly this form cause U have only the last login user viewing by
sho run.
I would like to se all user's connexions on the router.
james at 00:05:35 Wed Nov 22 2000
steve at 00:07:05 Wed Nov 22 2000
Francis at 00:13:09 Wed Nov 22 2000
-Message d'origine-
De
I've just got a hold of a PIX 515UR and I want to upgrade to the lastest
software, but when I do a show ver there is no activation key.
Is this normal, or do I have to obtain one from somewhere?
Dion Radford
Mellon Site Services - Europe
71 Queen Victoria Street, London, EC4V 4DR
+44 (0) 20
at the moment. Used it a
few
times to allow PDM, but not sure why Cisco do it. Who knows - you could
maybe even upgrade a Failover Pix using the DES image :-)
Gaz
Radford Dion wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I've just got a hold of a PIX 515UR an
Hello
I'm trying to log access on a router (who and when) with a simple
configuration ( without tacacs+ or radius)
how i can do this ?
Kind Regards.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34346t=34346
--
FAQ, list
Do U hear about wrong negociation with a 2900XL (version SA6 et 12.0xxx) and
C5000
I have many CRC giants error in interface between a C2900XL and a C5000
with an ISL trunk the probleme occur with FEC and single link.
Have U an idea ?
Kind Regards.
Thierry DION
Reach me by ICQ#64695814
no keepalive on the interface configuration
this will cut off the electrical signalisation
T.dion
CCNP certified
-Message d'origine-
De : Aamer Kaleem [mailto:[EMAIL PROTECTED]]
Envoyi : vendredi 18 janvier 2002 08:14
@ : [EMAIL PROTECTED]
Objet : How to make Serial 0 up/up without
You cannot bridle a physical link on a software.
This is your purchase if you do not want 128k for the link see your provider
for 64k or 32k
but if U want some bandwith by applications use QOS.
T.Dion
CCNP certifed
-Message d'origine-
De : kaushalender [mailto:[EMAIL PROTECTED]]
You cannot bridle a physical link on a software.
This is your purchase if you do not want 128k for the link see your provider
for 64k or 32k
but if U want some bandwith by applications use QOS.
T.Dion
CCNP certifed
-Message d'origine-
De : kaushalender [mailto:[EMAIL PROTECTED]]
It's not desirable to use a well-know command for an alias it's better to
use
alias exec coprs copy run start
T.dion
CCNP certified
-Message d'origine-
De : Chris Headings [mailto:[EMAIL PROTECTED]]
Envoyi : jeudi 17 janvier 2002 03:59
@ : [EMAIL PROTECTED]
Objet : RE: repeating a
-Message d'origine-
De : Pieter Jordaan [mailto:[EMAIL PROTECTED]]
Envoyi : jeudi 17 janvier 2002 12:03
@ : [EMAIL PROTECTED]
Objet : Runts and Giants [7:32281]
Hi
I have a cisco 2924 switch connected to a 6509, the port is configured as a
trunk. when I use ISL encaptulation between
sorry for rewritting but
the last mail didn't work
see the link: http://www.cisco.com/warp/public/473/43.html#fifth
-Message d'origine-
De : Dion, Thierry
Envoyi : jeudi 17 janvier 2002 13:42
@ : [EMAIL PROTECTED]
Objet : RE: Runts and Giants [7:32281]
-Message d'origine
traffic shapping is use with FR if U haven't FR, TR will not work.
T.dion
CCNP certified
-Message d'origine-
De : Hire, Ejay [mailto:[EMAIL PROTECTED]]
Envoyi : jeudi 17 janvier 2002 16:04
@ : [EMAIL PROTECTED]
Objet : RE: Bandwith [7:32264]
For Ios 11.3 you can restrict outbound
SNMPv3-Version 3 of the Simple Network Management Protocol.
SNMPv3 is an interoperable standards-based protocol defined in RFCs
2273-2275.
SNMPv3 provides secure access to devices by a combination of authenticating
and encrypting packets over the network.
The security features provided in
The access-list is the important point - if you traffic doesn't get caught
by the access-list it wont be encrypted.
Your access list encrypts telnet traffic that is sourced from the loopback
address. Now I could be wrong, but if you are on router ISDN1 and telnet to
the loopback address of
of the information in
file?
Thanks,
Dion
*
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee. Access, copying
or re-use of the e-mail or any information
The solution was to type vlan database at the enable mode, which allows me
to configure vtp parameters.
Thanks go to Andrew.
Dion
-Original Message-
From: Radford Dion [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 1:54 PM
To: [EMAIL PROTECTED]
Subject: VTP config
Can anyone tell me if a DSP card is required in a 1750 for a VIC-2FXS to be
recognised by the IOS?
I have a voice IOS but it's not showing the VIC as being installed.
Thanks,
Dion
*
DISCLAIMER: The information contained
provider congestion management capability
http://www.cisco.com/warp/public/121/index.shtml
Dion
-Original Message-
From: Stephen Skinner [SMTP:[EMAIL PROTECTED]]
Sent: Friday 27 April 2001 15:40
To: [EMAIL PROTECTED]
Subject: ATM Bit rate [7:2256]
Guys,
i`m looking for a good
thanks,
Dion
*
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee. Access, copying
or re-use of the e-mail or any information contained therein by any
password fred
Fingers like mine - too big to tyyppe?
Anyone feel free to correct me if info is garbage.
Cheers,
Gareth
"Radford Dion" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Everyone.
I am having trouble trying
van Ree [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday 28 March 2001 23:56
To: Radford Dion; [EMAIL PROTECTED]
Subject: Re: Tacacs and dialup authentication
Hi,
Where is the TACACS configured.
I would have thought you would need a reference to TACACS in your AAA
statements
Hi Everyone.
I am having trouble trying to work out why I cannot get a router to connect
via ISDN to another router when tacacs is configured. I want to use the
local Tacacs database and I have followed the instructions on the cisco web
site
not be any
use to you.
I haven't bought one yet, because I am trying to find an inexpensive,
scalable box with a PRI, BRI and analog extensions for voice etc. As soon as
I do I will let you know how it goes.
Hope this helps.
Dion
-Original Message-
From: Groupstudy [SMTP:[EMAIL
If anyone out there ever has to do an 8MB Flash Upgrade on a 1750 with a
Kingston product, ensure that the revision number of the flash card is NOT
9922011-001.A00. This is version is a known problem and Kingston will
replace the Flash on request.
Thanks to those who emailed me with advice.
Dion
that has been opened.
I have raised it with Kingston but in the meantime I would appreciate any
comments or experiences.
Thanks,
Dion
*
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely
. My telco says
there is nothing wrong with the physical connection or the configuration of
the PVC. If anyone has an explanation for these events, or even better, a
solution to fix the damn thing, I'd love to hear it.
Thanks,
Dion
Serial0(in): Status, myseq 89
RT IE 1, length 1, type 0
KA IE 3
Yes . The better way to do it is to create virtual dialer interfaces. ie
dialer 0, dialer 1 etc
You can make dialer 0 the backup to the serial line, while dialer 1 can be
used for other purposes.
The obvious risk with this is that the BRI may be in use when you need it
for backup purposes. You
Any dram simms with Parity will work (ie ECC memory).
From what I can remember (and my memory fades because it's not ecc), you can
check if your simms have parity by looking in the top right hand corner
where there are 5 or 6 little boxes drawn on the SIMM. If the bottom 3 boxes
contain circuit
Hi everyone.
Is there any way to backup a DDR ISDN line with the same ISDN line? Are you
confused? me too!
Basically I want the router to try dialing one number, and if it fails to
connect, to then try dialing another number?
Any help would be appreciated.
Thanks,
Dion
If you are able to do a reverse telnet to the modem then obviously the modem
is connected to the router correctly. You can then enter an atdt command to
test if there is a telephone cable connected to the modem.
If you don't know what reverse telnet is refer to previous mails.
Dion
, but it still doesn't work. I
have tried debugging ip packets but I don't even get an output!!
Any help would be appreciated.
Dion
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http
It's actually tcp port 49, according to my packet sniffer.
-Original Message-
From: Radford Dion [SMTP:[EMAIL PROTECTED]]
Sent: Friday 28 July 2000 11:46
To: [EMAIL PROTECTED]
Subject: TACACS through firewall
Does anyone know what ports TACACS uses?
I have read
to the fact
that we are using the same major network number for both OSPF and EIGRP?
If anyone has any ideas let me know.
Thanks,
Dion
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http
and
everything works great, but I can't simulate the 1000 network ospf database,
possible routing loops and convergence time.
Thanks for the help so far,
Dion
-Original Message-
From: John Swartz [SMTP:[EMAIL PROTECTED]]
Sent: Thursday 20 July 2000 13:09
To: Radford Dion
Cc: [EMAIL
40 matches
Mail list logo