ct/software/ios120/12cgcr/dial_
> c/dcdbakdp.htm
> http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
> HTH,
> Connie
>
> "FRS" <[EMAIL PROTECTED]> wrote in message 8t6nf8$l8u$[EMAIL PROTECTED]">news:8t6nf8$l8u$[EMAIL PROTECTED]...
> > Hi,
&g
Hi,
I have 4 sites reporting back to Corp over FR
I need to implement ISDN backup to all sites
How do I get the single Corp BRI interface to accept the different remote
BRI ip addresses and route accordingly ... I am running RIP
righ now, only one remote sites is configured as:
i
you don't need any ip add. at serial
> interfaces.
>
> this is ISDN DDR http://www.cisco.com/warp/public/123/5.html
>
> for extra issues use www.cisco.com/go/tools -> tech central
> this is a very helpful site for all cisco users.
>
> Serhat ERKAN
> Network Engineer
>
&
Hi all,
I need your input here.
I have 4 remote sites that are connected to HQ via FR as the primary WAN
connection.
I need to have ISDN DDR for all remote sites to HQ in case a FR circuit goes
down ...
On the BRI interface at HQ ... I only need 1 ip address right?
Can I get the HQ router to assi
Congrats!!
""Jeff Lodwick"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi group,
> I want to thank everybody on the list for their help on my bumpy road to
> CCNP. It was a lot of work but it all payed off yesterday. Yesterday was
> my day of glory.
Hi,
I have a 2523 switch which is to act as the FR switch.
Can anyone give me the part number for the DTE-DCE back-to-back cables?
Many thanks,
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclo
TACACS+ ...
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everyone!
>
> I search for a solution, that can log all commands a user put in at CLI. I
> want set permission for some commands. The program must be run on a Sun
> Solaris.
> I will log, what Comma
d S/T interfaces on your routers, and you can place calls between
> the two. Is cheaper imho.
>
> Brian
>
>
> On Thu, 19 Oct 2000, FRS wrote:
>
> > Hi,
> >
> > I am looking for recommendations for a ISDN simulator in preparation for
the
> > CCIE Lab exam.
Hi,
I am looking for recommendations for a ISDN simulator in preparation for the
CCIE Lab exam. Is there a simulator used in the lab exam and if yes, what
type?
I have heard that I should get an Adtran Atlas 800 Switch with 2 BRI
interfaces. Does anyone know the estimated cost of this unit, used
Sam,
I'm a newbie :)
Let me know how you figured all that out from an ip address!
"Sam Adams" <[EMAIL PROTECTED]> wrote in message
01c03655$2e156cd0$075901c0@meanboy4">news:01c03655$2e156cd0$075901c0@meanboy4...
> Funny how you are in California but your hotmail ip indicates that your
IS
Hi,
What is the difference between the LS 100 and the LS1010?
Will the LS100 provide the same purpose and functionality as the LS1010 when
preparing for the CCIE Lab?
Thanks.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi,
When a bridge comes online for the first time, does it use the source MAC
addresses or the destination MAC addresses initially to build the bridge
table?
I cannot seem to find this answer on CCO or Caslow.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.gr
No, I don't have it inserted into a ring yet. Maybe that's the problem!
So the Interface first has to be inserted into the ring before it shows UP,
UP!
Thanks for all the help!
"Brian" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTE
Wow ... we have a genius in here!
No need to freak out dude ... I am on the Newsgroup to learn.
"Saverio Pangoli" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> On Sun, 8 Oct 2000, FRS wrote:
>
> > Hi everyone,
> >
&
Jay,
I issued a no shutdown command ... is the state not supposed to be UP, UP
now?
"Jay Hennigan" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> On 8 Oct 2000 20:04:29 -0400, FRS <[EMAIL PROTECTED]> wrote:
>
> :Just
Hi everyone,
Just messing around with a router did a show int token 0 command says:
Interface up, Line protocol down.
When you issue the no shut command on the interface it still says Interface
up, Line protocol down. Why is this?
Thanks.
**NOTE: New CCNA/CCDA List has been formed. For more in
Paul,
Thanks for your reply. How about helping me with this one:
When are ICMP redirects used in EIGRP?
Looking forward to your reply!
Thanks all.
"Paul Werner" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > Excuse me. I meant to ask if a UDP Packet
You the man Paul!
Many thanks.
"Paul Werner" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > Excuse me. I meant to ask if a UDP Packet can be
> fragmented
> > >
> > > Yes.
> > >
> > > > and what happens
> > > > to the UDP Header if it can be fragmented?
ElephantChild,
Thank you!!
"ElephantChild" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> On Sat, 7 Oct 2000, FRS wrote:
>
> >
> > "ElephantChild" <[EMAIL PROTECTED]> wrote in message
> >
news:[EMAIL PROTECTED]...
>
ck. Let us know if you have more Qs.
>
> Priscilla
>
> At 11:10 AM 10/7/00, FRS wrote:
>
> >"ElephantChild" <[EMAIL PROTECTED]> wrote in message
>
>news:[EMAIL PROTECTED]..
.
> > > On Sat, 7 Oct 2000, FRS wrote:
> > >
> > > > Exc
"ElephantChild" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> On Sat, 7 Oct 2000, FRS wrote:
>
> > Excuse me. I meant to ask if a UDP Packet can be fragmented
>
> Yes.
>
> > and what happens
> > to the UDP Header if it can be fr
Excuse me. I meant to ask if a UDP Packet can be fragmented and what happens
to the UDP Header if it can be fragmented?
Thanks.
""FRS"" <[EMAIL PROTECTED]> wrote in message 8rm9i2$kte$[EMAIL PROTECTED]">news:8rm9i2$kte$[EMAIL PROTECTED]...
> Can a UDP Header
Can a UDP Header be fragmented? And if yes, how is it fragmented?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, lis
Contact you Local Cisco Channel SE and organize with them. Those guys are
the best.
""J K"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Im my attempts to perp for my lab exam i took the anew1 course from global
> knowledge . Let me just say it was great at
explorer
> frames, I'd say the answer is yes. does it read it the same way
> a bridge does.no...
>
>
> "FRS" <[EMAIL PROTECTED]> wrote in message 8rkpgd$hpi$[EMAIL PROTECTED]">news:8rkpgd$hpi$[EMAIL PROTECTED]...
> > Can a PC understand/read a
Can a PC understand/read a RIF?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
om/univercd/cc/td/doc/cisintwk/idg4/nd2010.htm#xtocid29884
> 13
>
> Don
>
>
>
> -Original Message-
> From: FRS [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, October 04, 2000 10:55 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Traffic Shaping
>
>
> Michae
Michael,
Thanks for the reply.
Is there any 'load' command that specified percentages example, ' load 30'
meaning 30% utilization?
Thanks,
""Michael Fountain"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> There is a 'load-interval' command that you can use
Hi,
What does the IOS 'load' command do in traffic shaping and QOS situations?
Thanks
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/li
You might want to sanitize your config before posting ... but I'm sure you
knew that :)
"Rajeev Karamchand" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All
>
> I am facing a strange problem. I am losing my
> connectivity to the pix firewall from inside. I
tched environment, most switches
will
> bridge (i.e. do L2 switching) by default on the ports that belong to the
> same VLAN.
>
> Does it answer?
>
> Good luck.
>
> -Original Message-
> From: FRS [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, October 03, 2000 7:44
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Repo
http://www.cisco.com/warp/public/480/10.html
"Roland Mok" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Anyone knows the difference b/w RADIUS and TACACS+?
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/
Is it possible to bridge inside a VLAN?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscripti
onless) used by a protocol by looking at the needs of the
> communication involved and the amount of overhead that can be tolerated.
>
> HTH
>
> Karen E Young
> ELF Technologies, Inc
> [EMAIL PROTECTED]
>
>
>
>
>
>
ses, you can deduce the port type (connection-oriented or
> connectionless) used by a protocol by looking at the needs of the
> communication involved and the amount of overhead that can be tolerated.
>
> HTH
>
> Karen E Young
> ELF Technologies, Inc
> [EMAIL PROTECTED]
>
&g
t; [EMAIL PROTECTED]
> Desk: 206-770-4035
> Pager: 206-994-4514
>
>
>
>
> "FRS"
> <[EMAIL PROTECTED]To: [EMAIL PROTECTED]
> >cc:
>
All,
Can you please provide me some resources to find out which Protocols RADIUS
and TACACS+ uses to communicate?
Many thanks.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting
Many thanks for all the leads gentlemen.
""FRS"" <[EMAIL PROTECTED]> wrote in message 8r86hg$ef6$[EMAIL PROTECTED]">news:8r86hg$ef6$[EMAIL PROTECTED]...
> Hi all,
>
> This is off topic, but can anyone please tell me where to look on the Net
> f
Hi all,
This is off topic, but can anyone please tell me where to look on the Net
for used Racks or Cabinets for my Home CCIE Lab?
Many thanks.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
One of the "must-haves" for your collection as you start your journey
towards CCIE status, also make sure you get Interconnections by Dr. Radia
Perlman, Douglas Comer's book, Bruce Caslow's book and at Lab Prep time get
the Satterlee book.
""Bruce"" <[EMAIL PROTECTED]> wrote in message
8r3j6r$t74
Title: Juniper
I heard the Juniper is optimized for the Core
whereas Cisco excels in Core, Distribution and Access.
Should we not all be designing IOS-to-IOS solutions
for our clients considering the ROI with Cisco Gear?
OTOH, as in the case in client-server ... Novell
optimized for File and
I need some help in understanding Layer 3 Switching.
1. What does the process Layer 3 switching refer to?
2. Is it packets or frames being switched out of interfaces or ports?
3. Using the 2948G-L3 as an example, how is the switching determined - by
Routing table or CAM table?
All help is appr
Title: Archives down so I have a few questions regarding PIX Firewall
Contact your local Cisco Channel SE. Those guys are
great and always willing to help us learn!!!
""Fowler, Joey"" <[EMAIL PROTECTED]> wrote in message
E37739B46CE9D311A76700508B6CAF293CA93E@CORN">news:E37739B46CE9D311A7
http://www.cisco.com/warp/public/cc/pd/fw/sqfw500/profiles/bermu_ss.htm
"wdwdawd wadwadad" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Wow! I am stunned at your reponses. Perhaps if I
> request your advice in the context of a non-military
> organisation yo
Contact your Cisco Channel SE.
""J. Wang"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Anybody please advise the Cisco ATM Lab requirement,
> and what scenarios can I practice?
>
> Suppose I already have,
> Nortel ATM Switch (Centillion 100 with OC-3 MMF an
These questions are from Exam 350-001. The NDA has been broken.
""Derek Chung"" <[EMAIL PROTECTED]> wrote in message
8q2d0a$8kk$[EMAIL PROTECTED]">news:8q2d0a$8kk$[EMAIL PROTECTED]...
> Question 1:
> Router A and Router B are configured to route IP to each other over a
serial
> line. Host A is co
Hi all,
I need to buy some CCIE Study Gear. Can anyone recommend a place I can get
used Routers and Switches from at decent prices so that I can build my
personal lab?
I have tried some people that have advertised on the list but they either
could not supply or were out of stock.
Many thanks,
I cannot seem to find a manual on the Internet for Net X Ray.
Does anyone know of a site to get instructions to use Net X Ray.
Thanks in advance.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
Hi Everyone,
I have scheduled to take the CCIE Routing and Switching Written Exam 350-001
for August 31 2000.
Would you please be so kind as to send me any information that will help me
prepare for this exam?
I have heard that I need to concentrate on DLSW+, RSRB and knowing how to
read RIFs.
All
FRS #1 and CIT #2!!
"DA" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can someone advise on BOSON testing software or any other preparation
> materials?
>
> Thank You in advance
> DA
>
>
>
Hi,
Can you please indicate which Boson test is the best to use to prepare for
the CCDA and CID exams?
Thanks,
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report m
Hi,
I am trying to start a CCIE Study Group in San Diego.
Would any list members from San Diego please indicate if they are
interested?
Thanks.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: h
Hi,
I am looking for a suitable protocol analyzer that I can use with Windows
2000. I have tried NetXRay but it is incompatible with Win 2k.
On a side note, does anyone know where I can obtain a trial copy of
CiscoWorks 2000 because CCO does not offer it.
Thanks.
__
Hi all,
Do you have any suggestions on excellent resources to prepare for the
640-440 exam?
Thanks in advance.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report
Hi all,
Do you have any suggestions on excellent resources to prepare for the
640-440 exam?
Thanks in advance.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report m
That is not the case on the CCIE RS Written.
You are not told the number of answers you need to check.
""Fred Flinstone"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Question For the CCIE written test are the questions laid telling you
> there are two
Hi all,
Can you please tell me if the Boson exam for FRS and CIT is good prep for
the actual exam?
Thanks,
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report
58 matches
Mail list logo